Work Function Engineering of Graphene

Laser-Patternable Graphene Field Emitters for Plasma Displays

This paper presents a plasma display device (PDD) based on laser-induced graphene nanoribbons (LIGNs), which were directly fabricated on polyimide sheets. Superior field electron emission (FEE) characteristics, viz. a low turn-on field of 0.44 V/μm and a large field enhancement factor of 4578, were achieved for the LIGNs. Utilizing LIGNs as a cathode in a PDD showed excellent plasma illumination characteristics with a prolonged plasma lifetime stability. Moreover, the LIGN cathodes were directly laser-patternable. Such superior plasma illumination performance of LIGN-based PDDs has the potential to make a significant impact on display technology.

Graphene Decorated with Silver Nanoparticles as a Low-Temperature Methane Gas Sensor

This paper is devoted to an investigation on the methane sensing properties of graphene (G), decorated with silver nanoparticles (AgNPs), under ambient conditions. To do so, we first present an effective modification in the standard manner of decorating graphene by AgNPs. From structural analysis of the product (AgNPs/G), it is concluded that graphene is indeed decorated by AgNPs of a mean size 29.3 nm, free of aggregation, with a uniform distribution. The so-produced material is then used, as a resistivity-based sensor, to examine its response to the presence of methane gas. Our measurements are performed at relatively low temperatures, for various silver-to-graphene mass ratios (SGMRs) and methane concentrations. To account for the effects of humidity, we have made the measurements, at room temperature, for different levels of humidity. Our results demonstrate that an increase in the SGMR enhances the response of AgNPs/G to methane with an optimum value of SGMR ≅ 12%. It is also illustrated that for methane concentrations less than 2000 ppm, the maximal response increases linearly and rapidly, even at room temperature. Moreover, we demonstrate that AgNPs/G is of low limit of detection, highly stable, selective, reversible, repeatable, and sensor-to-sensor reproducible, for methane sensing. The results thus promise a low-cost and simple-to-fabricate methane sensing device.

A Comparative Study of Particle Size Distribution of Graphene Nanosheets Synthesized by an Ultrasound-Assisted Method

Graphene-based materials are highly interesting in virtue of their excellent chemical, physical and mechanical properties that make them extremely useful as privileged materials in different industrial applications. Sonochemical methods allow the production of low-defect graphene materials, which are preferred for certain uses. Graphene nanosheets (GNS) have been prepared by exfoliation of a commercial micrographite (MG) using an ultrasound probe. Both materials were characterized by common techniques such as X-ray diffraction (XRD), Transmission Electronic Microscopy (TEM), Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). All of them revealed the formation of exfoliated graphene nanosheets with similar surface characteristics to the pristine graphite but with a decreased crystallite size and number of layers. An exhaustive study of the particle size distribution was carried out by different analytical techniques such as dynamic light scattering (DLS), nanoparticle tracking analysis (NTA) and asymmetric flow field flow fractionation (AF4). The results provided by these techniques have been compared. NTA and AF4 gave higher resolution than DLS. AF4 has shown to be a precise analytical technique for the separation of GNS of different sizes.

The Role of Graphene and Other 2D Materials in Solar Photovoltaics

2D materials have attracted considerable attention due to their exciting optical and electronic properties, and demonstrate immense potential for next-generation solar cells and other optoelectronic devices. With the scaling trends in photovoltaics moving toward thinner active materials, the atomically thin bodies and high flexibility of 2D materials make them the obvious choice for integration with future-generation photovoltaic technology. Not only can graphene, with its high transparency and conductivity, be used as the electrodes in solar cells, but also its ambipolar electrical transport enables it to serve as both the anode and the cathode. 2D materials beyond graphene, such as transition-metal dichalcogenides, are direct-bandgap semiconductors at the monolayer level, and they can be used as the active layer in ultrathin flexible solar cells. However, since no 2D material has been featured in the roadmap of standard photovoltaic technologies, a proper synergy is still lacking between the recently growing 2D community and the conventional solar community. A comprehensive review on the current state-of-the-art of 2D-materials-based solar photovoltaics is presented here so that the recent advances of 2D materials for solar cells can be employed for formulating the future roadmap of various photovoltaic technologies.

MoS2 Quantum Dot/Graphene Hybrids for Advanced Interface Engineering of a CH3NH3PbI3 Perovskite Solar Cell with an Efficiency of over 20

Interface engineering of organic-inorganic halide perovskite solar cells (PSCs) plays a pivotal role in achieving high power conversion efficiency (PCE). In fact, the perovskite photoactive layer needs to work synergistically with the other functional components of the cell, such as charge transporting/active buffer layers and electrodes. In this context, graphene and related two-dimensional materials (GRMs) are promising candidates to tune "on demand" the interface properties of PSCs. In this work, we fully exploit the potential of GRMs by controlling the optoelectronic properties of molybdenum disulfide (MoS₂) and reduced graphene oxide (RGO) hybrids both as hole transport layer (HTL) and active buffer layer (ABL) in mesoscopic methylammonium lead iodide (CH₃NH₃PbI₃) perovskite (MAPbI₃)-based PSCs. We show that zero-dimensional MoS₂ quantum dots (MoS₂ QDs), derived by liquid phase exfoliated MoS₂ flakes, provide both hole-extraction and electron-blocking properties. In fact, on one hand, intrinsic n-type doping-induced intraband gap states effectively extract the holes through an electron injection mechanism. On the other hand, quantum confinement effects increase the optical band gap of MoS₂ (from 1.4 eV for the flakes to >3.2 eV for QDs), raising the minimum energy of its conduction band (from -4.3 eV for the flakes to -2.2 eV for QDs) above the one of the conduction band of MAPbI₃ (between -3.7 and -4 eV) and hindering electron collection. The van der Waals hybridization of MoS₂ QDs with functionalized reduced graphene oxide (f-RGO), obtained by chemical silanization-induced linkage between RGO and (3-mercaptopropyl)trimethoxysilane, is effective to homogenize the deposition of HTLs or ABLs onto the perovskite film, since the two-dimensional nature of RGO effectively plugs the pinholes of the MoS₂ QD films. Our "graphene interface engineering" (GIE) strategy based on van der Waals MoS₂ QD/graphene hybrids enables MAPbI₃-based PSCs to achieve a PCE up to 20.12% (average PCE of 18.8%). The possibility to combine quantum and chemical effects into GIE, coupled with the recent success of graphene and GRMs as interfacial layer, represents a promising approach for the development of next-generation PSCs.

High Performance Acetylene Sensor with Heterostructure Based on WO₃ Nanolamellae/Reduced Graphene Oxide (rGO) Nanosheets Operating at Low Temperature

The development of functionalized metal oxide/reduced graphene oxide (rGO) hybrid nanocomposites concerning power equipment failure diagnosis is one of the most recent topics. In this work, WO₃ nanolamellae/reduced graphene oxide (rGO) nanocomposites with different contents of GO (0.5 wt %, 1 wt %, 2 wt %, 4 wt %) were synthesized via controlled hydrothermal method. X-ray diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric analyses-derivative thermogravimetric analysis-differential scanning calorimetry (TG-DTG-DSC), BET, and photoluminescence (PL) spectroscopy were utilized to investigate morphological characterizations of prepared gas sensing materials and indicated that high quality WO₃ nanolamellae were widely distributed among graphene sheets. Experimental ceramic planar gas sensors composing of interdigitated alumina substrates, Au electrodes, and RuO₂ heating layer were coated with WO₃ nanolamellae/reduced graphene oxide (rGO) films by spin-coating technique and then tested for gas sensing towards multi-concentrations of acetylene (C₂H₂) gases in a carrier gas with operating temperature ranging from 50 °C to 400 °C. Among four contents of prepared samples, sensing materials with 1 wt % GO nanocomposite exhibited the best C₂H₂ sensing performance with lower optimal working temperature (150 °C), higher sensor response (15.0 toward 50 ppm), faster response-recovery time (52 s and 27 s), lower detection limitation (1.3 ppm), long-term stability, and excellent repeatability. The gas sensing mechanism for enhanced sensing performance of nanocomposite is possibly attributed to the formation of p-n heterojunction and the active interaction between WO₃ nanolamellae and rGO sheets. Besides, the introduction of rGO nanosheets leads to the impurity of synthesized materials, which creates more defects and promotes larger specific area for gas adsorption, outstanding conductivity, and faster carrier transport. The superior gas sensing properties of WO₃/rGO based gas sensor may contribute to the development of a high-performance ppm-level gas sensor for the online monitoring of dissolved C₂H₂ gas in large-scale transformer oil.

Highly-flexible perovskite photodiodes employing doped multilayer-graphene transparent conductive electrodes

We first report highly-flexible perovskite photodiodes, using AuCl₃-doped multilayer-graphene transparent conducting electrodes. The doping effect of the AuCl₃ is more effective when the number of layers (L _n ) = 1 and 2 rather than 3 and 4, as analyzed by Raman scattering and sheet resistance. The photodiodes optimized at L _n  = 2 exhibit a 10⁵ photo-/dark-current ratio, 0.4 AW^-1 responsivity, 80% external quantum efficiency, 5.3 × 10¹⁰ cm Hz^1/2/W detectivity, 90 dB linear dynamic range, and ∼1.1 μs response time. In addition, the photodiodes show excellent bending stabilities, maintaining a responsivity at about 70% of its initial value, even after 1000 bending cycles at a bending curvature of 4 mm.

Enhanced photocatalytic dye degradation and hydrogen production ability of Bi25FeO40-rGO nanocomposite and mechanism insight

A comprehensive comparison between BiFeO3-reduced graphene oxide (rGO) nanocomposite and Bi25FeO40-rGO nanocomposite has been performed to investigate their photocatalytic abilities in degradation of Rhodamine B dye and generation of hydrogen by water-splitting. The hydrothermal technique adapted for synthesis of the nanocomposites provides a versatile temperature-controlled phase selection between perovskite BiFeO3 and sillenite Bi25FeO40. Both perovskite and sillenite structured nanocomposites are stable and exhibit considerably higher photocatalytic ability over pure BiFeO3 nanoparticles and commercially available Degussa P25 titania. Notably, Bi25FeO40-rGO nanocomposite has demonstrated superior photocatalytic ability and stability under visible light irradiation than that of BiFeO3-rGO nanocomposite. The possible mechanism behind the superior photocatalytic performance of Bi25FeO40-rGO nanocomposite has been critically discussed.

Revealing Strain-Induced Effects in Ultrathin Heterostructures at the Nanoscale

Two-dimensional materials are being increasingly studied, particularly for flexible and wearable technologies because of their inherent thickness and flexibility. Crucially, one aspect where our understanding is still limited is on the effect of mechanical strain, not on individual sheets of materials, but when stacked together as heterostructures in devices. In this paper, we demonstrate the use of Kelvin probe microscopy in capturing the influence of uniaxial tensile strain on the band-structures of graphene and WS₂ (mono- and multilayered) based heterostructures at high resolution. We report a major advance in strain characterization tools through enabling a single-shot capture of strain defined changes in a heterogeneous system at the nanoscale, overcoming the limitations (materials, resolution, and substrate effects) of existing techniques such as optical spectroscopy. Using this technique, we observe that the work-functions of graphene and WS₂ increase as a function of strain, which we attribute to the Fermi level lowering from increased p-doping. We also extract the nature of the interfacial heterojunctions and find that they get strongly modulated from strain. We observe that the strain-enhanced charge transfer with the substrate plays a dominant role, causing the heterostructures to behave differently from two-dimensional materials in their isolated forms.

Effect of graphene oxide nanosheets on visible light-assisted antibacterial activity of vertically-aligned copper oxide nanowire arrays

In the present work, the effect of graphene oxide (GO) nanosheets on the antibacterial activity of CuO nanowire arrays under visible light irradiation is shown. A combined thermal oxidation/electrophoretic deposition technique was employed to prepare three-dimensional networks of graphene oxide nanosheets hybridized with vertically aligned CuO nanowires. With the help of standard antibacterial assays and X-ray photoelectron spectroscopy, it is shown that the light-activated antibacterial response of the hybrid material against gram-negative Escherichia coli is significantly improved as the oxide functional groups of the GO nanosheets are reduced. In order to explore the physicochemical mechanism behind this behavior, ab-initio simulations based on density functional theory were performed and the effect of surface functional groups and hybridization were elucidated. Supported by the experiments, a three-step photo-antibacterial based mechanism is suggested: (i) injection of an electron from CuO into rGO, (ii) localization of the excess electron on rGO functional groups, and (iii) release of reactive oxygen species lethal to bacteria. Activation of new photoactive and physical mechanisms in the hybrid system makes rGO-modified CuO nanowire coatings as promising nanostructure devices for antimicrobial applications in particular for dry environments.

Amine-functionalized graphene nanosheet-supported PdAuNi alloy nanoparticles: efficient nanocatalyst for formic acid dehydrogenation

PdAuNi/f-GNS provides CO-free hydrogen generation from additive-free dehydrogenation of formic acid even at room temperature.

Controlling electronic properties of MoS2/graphene oxide heterojunctions for enhancing photocatalytic performance: the role of oxygen

The manipulation of the constituents of novel hetero-photocatalysts is an effective method for improving photocatalytic efficiency, but a theoretical understanding of the relationship between interlayer interaction and photocatalytic activity is still lacking.

Graphene gas sensing using a non-contact microwave method

We report a non-contact CVD graphene gas sensing method that utilises a high Q microwave dielectric resonator perturbation technique. A graphene sample is coupled to the evanescent field of a dielectric resonator whereupon nitrogen dioxide (NO₂), a p-doping gas, is detected by monitoring the change in the linewidth and frequency of the resonant mode. The resonant peak shape is dependent on the number of carriers in the graphene sheet. Therefore, the linewidth perturbation can be converted to a measurement of the graphene sheet resistance. To demonstrate the strength of this technique, sensor response curves for NO₂ at different concentrations and temperatures are measured showing sub ppm sensitivity. This technique eliminates interactions between the trace gas and metal contacts that otherwise effect the sensor response of the graphene device.

Chemically Robust Ambipolar Organic Transistor Array Directly Patterned by Photolithography

Organic ambipolar transistor arrays for chemical sensors are prepared on a flexible plastic substrate with a bottom-gate bottom-contact configuration to minimize the damage to the organic semiconductors, for the first time, using a photolithographically patternable polymer semiconductor. Well-balanced ambipolar charge transport is achieved by introducing graphene electrodes because of the reduced contact resistance and energetic barrier for electron transport.

Facile spectroscopic approach to obtain the optoelectronic properties of few-layered graphene oxide thin films and their role in photocatalysis

Herein, we report the synthesis of few-layered graphene oxide (GO), reduced graphene oxide (rGO), and rGO/ZnO thin films on a glass substrate.

Chemical vapor deposition of partially oxidized graphene

Mutlu et al. reported on chemical vapor deposition (CVD) of partially oxidized graphene films on copper foils under near-atmospheric pressure.

Structural, electronic, and magnetic properties of non-planar doping of BeO in graphene: a DFT study

The non-planar molecular doping of BeO is more efficient in inducing a band gap relative to its planar doping with no magnetic effect realization.

Mechanism of enhancing visible-light photocatalytic activity of BiVO4via hybridization of graphene based on a first-principles study

The interface properties of the hybrid graphene/BiVO₄(001) heterojunction were investigated by first-principle calculations incorporating semiempirical dispersion-correction schemes to describe correctly van der Waals interactions.

Role of MoS2and WS2monolayers on photocatalytic hydrogen production and the pollutant degradation of monoclinic BiVO4: a first-principles study

MS₂/m-BiVO₄(010) heterostructures showed a high driving force for H₂evolution and pollutant degradation under simulated visible light irradiation.

Electronic properties of embedded graphene: doped amorphous silicon/CVD graphene heterostructures

Large-area graphene film is of great interest for a wide spectrum of electronic applications, such as field effect devices, displays, and solar cells, among many others. Here, we fabricated heterostructures composed of graphene (Gr) grown by chemical vapor deposition (CVD) on copper substrate and transferred to SiO2/Si substrates, capped by n‑ or p-type doped amorphous silicon (a-Si:H) deposited by plasma-enhanced chemical vapor deposition. Using Raman scattering we show that despite the mechanical strain induced by the a-Si:H deposition, the structural integrity of the graphene is preserved. Moreover, Hall effect measurements directly on the embedded graphene show that the electronic properties of CVD graphene can be modulated according to the doping type of the a-Si:H as well as its phase i.e. amorphous or nanocrystalline. The sheet resistance varies from 360 Ω sq(-1) to 1260 Ω sq(-1) for the (p)-a-Si:H/Gr (n)-a-Si:H/Gr, respectively. We observed a temperature independent hole mobility of up to 1400 cm(2) V(-1) s(-1) indicating that charge impurity is the principal mechanism limiting the transport in this heterostructure. We have demonstrated that embedding CVD graphene under a-Si:H is a viable route for large scale graphene based solar cells or display applications.

Photo-induced Doping in GaN Epilayers with Graphene Quantum Dots

We demonstrate a new doping scheme where photo-induced carriers from graphene quantum dots (GQDs) can be injected into GaN and greatly enhance photoluminescence (PL) in GaN epilayers. An 8.3-fold enhancement of PL in GaN is observed after the doping. On the basis of time-resolved PL studies, the PL enhancement is attributed to the carrier transfer from GQDs to GaN. Such a carrier transfer process is caused by the work function difference between GQDs and GaN, which is verified by Kelvin probe measurements. We have also observed that photocurrent in GaN can be enhanced by 23-fold due to photo-induced doping with GQDs. The improved optical and transport properties from photo-induced doping are promising for applications in GaN-based optoelectronic devices.

A Graphene Oxide-Based Fluorescent Platform for Probing of Phosphatase Activity

We presented a strategy for fabricating graphene oxide (GO)-based fluorescent biosensors to monitor the change of phosphorylation state and detect phosphatase activity. By regulating the interaction between the negatively charged phosphate group and the positively charged amino residue, we found that GO showed different quenching efficiency toward the phosphorylated and dephosphorylated dye-labeled peptides. To demonstrate the application of our method, alkaline phosphatase (ALP) was tested as a model enzyme with phosphorylated fluorescein isothiocyanate (FITC)-labeled short peptide FITC-Gly-Gly-Gly-Tyr(PO₃^2-)-Arg as the probe. When the negatively charged phosphate group in the Tyr residue was removed from the peptide substrate by enzymatic hydrolysis, the resulting FITC-Gly-Gly-Gly-Tyr-Arg was readily adsorbed onto the GO surface through electrostatic interaction. As a result, fluorescence quenching was observed. Furthermore, the method was applied for the screening of phosphatase inhibitors.

Substrate-dependent resistance decrease of graphene by ultraviolet-ozone charge doping

Graphene's resistance can decrease as much as 80% via UVO treatment depending on a substrates' band gap and photogenerated charge carriers.

Modulation of the exfoliated graphene work function through cycloaddition of nitrile imines

1,3-Dipolar cycloaddition between nitrile imines and graphene is studied. The work function of functionalized-graphene depends on the nature of functionalization.

Wide-range work-function tuning of active graphene transparent electrodes via hole doping

A novel strategy for preparing active transparent conductive electrodes by doping LBL-stacked graphene with AuCl₃, successfully achieving an extremely wide range of work-function tunability of up to ~1.5 eV.

Facile synthesis of TiO2-RGO composite with enhanced performance for the photocatalytic mineralization of organic pollutants

Current research reports the synthesis of reduced graphene oxide (RGO)-TiO2 nanocomposite by in-situ redox method and graphene oxide by modified hummers method. The ratio of RGO and TiO2 in the composite was optimized to show best photocatalytic activity for the degradation of targeted pollutants. Optimized (1:10) RGO-TiO2 nanocomposite was characterized by various techniques viz. X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller surface area (BET), Raman and diffuse reflectance spectroscopy (DRS) technique confirming successful formation of nanocomposite. XRD results confirm the presence of anatase phase in RGO-TiO2. Uniform dispersion of TiO2 nanoparticles on RGO could be seen from TEM images. The obtained results of (1:10) RGO-TiO2 showed five-fold and two-fold enhancement for the visible light and UV light, respectively, for the photocatalytic mineralization of methylene blue dye as compared to commercial Aeroxide P25 TiO2. The excellent photocatalytic mineralization activity of (1:10) RGO-TiO2 could be attributed to the enhanced surface area of composite as well as to its good electron sink capability. (1:10) RGO-TiO2 could be recycled easily and was found to be equally efficient even after the fourth cycle for the photocatalytic mineralization of methylene blue dye. The non-selectivity of synthesized composite was checked by the mineralization studies of oxalic acid.

Long-term stability of Si-organic hybrid solar cells with a thermally tunable graphene oxide platform

The PEDOT:PSS/Si solar cell with a rGO layer enhances the stability in a package-free device as the rGO layer with various annealing temperatures plays a critical role as a passivation layer in the PEDOT:PSS/Si interface.

Flower-like Palladium Nanoclusters Decorated Graphene Electrodes for Ultrasensitive and Flexible Hydrogen Gas Sensing

Flower-like palladium nanoclusters (FPNCs) are electrodeposited onto graphene electrode that are prepared by chemical vapor deposition (CVD). The CVD graphene layer is transferred onto a poly(ethylene naphthalate) (PEN) film to provide a mechanical stability and flexibility. The surface of the CVD graphene is functionalized with diaminonaphthalene (DAN) to form flower shapes. Palladium nanoparticles act as templates to mediate the formation of FPNCs, which increase in size with reaction time. The population of FPNCs can be controlled by adjusting the DAN concentration as functionalization solution. These FPNCs_CG electrodes are sensitive to hydrogen gas at room temperature. The sensitivity and response time as a function of the FPNCs population are investigated, resulted in improved performance with increasing population. Furthermore, the minimum detectable level (MDL) of hydrogen is 0.1 ppm, which is at least 2 orders of magnitude lower than that of chemical sensors based on other Pd-based hybrid materials.

Effect of the reduction process on the field emission performance of reduced graphene oxide cathodes

The effect of the reduction process and oxygen-contained functional groups on the field emission performance of reduced graphene oxide cathodes.

Spin transport properties in lower n-acene–graphene nanojunctions

A series of n-acene–graphene (n = 3, 4, 5, 6) devices, in which n-acene molecules are sandwiched between two zigzag graphene nanoribbon (ZGNR) electrodes, are modeled through the spin polarized density functional theory combined with the non-equilibrium Green's function technique.

A facile route to prepare few-layer graphene/polyamide 6 nanocomposites by liquid reactive extrusion

A liquid reactive extrusion process was developed to prepare graphene/polyamide 6 nanocomposites and its crystalline and mechanical properties.