Recent Developments of Carboxymethyl Cellulose

Efficient photocatalytic remediation of lerui acid brilliant blue dye using radiation- prepared carboxymethyl cellulose/acrylic acid hydrogel supported by ZnO@Ag

Organic dye pollution from textiles and other industries presents a substantial risk to people and aquatic life. The use of photocatalysis to decolorize water using the strength of UV light is one of the most important remediation techniques. In the present study, a novel nanocomposites hydrogel including carboxymethyl cellulose (CMC), acrylic acid (AAc), Zinc oxide (ZnO), and silver (Ag) nanoparticles was produced using an eco-friendly γ-irradiation technique for photocatalytic decolorization applications. ZnO and Ag nanoparticles were distributed in the CMC/AAc hydrogel matrix without significant aggregation. SEM, XRD, EDX, TEM, and FTIR analyses were used to assess the physicochemical characteristics of the nanocomposite samples. Carboxymethyl cellulose/acrylic acid/Zinc oxide doped silver (CMC/PAAc/ZnO@Ag) nanocomposite hydrogels were developed and utilized in the photocatalytic decolorization of the lerui acid brilliant blue dye (LABB) when exposed to ultraviolet (UV) radiation. UV- Vis spectrophotometry was utilized to analyze the optical properties of the produced nanostructure. Regarding the decolorization of the LABB, the impacts of operational variables were investigated. The optimum conditions for decolorization (93 %) were an initial concentration of 50 mg/L, pH = 4, catalyst dosage of 50 g/L, and exposure time of 90 min. The results illustrated that the LABB acidic dye from wastewater was remarkably decolored.

NIR-responsive carboxymethyl-cellulose hydrogels containing thioketal-linkages for on-demand drug delivery system

Near-infrared (NIR) light-responsive hydrogels have emerged as a highly promising strategy for effective anticancer therapy owing to the remotely controlled release of chemotherapeutic molecules with minimal invasive manner. In this study, novel NIR-responsive hydrogels were developed from reactive oxygen species (ROS)-cleavable thioketal cross-linkers which possessed terminal tetrazine groups to undergo a bio-orthogonal inverse electron demand Diels Alder click reaction with norbornene modified carboxymethyl cellulose. The hydrogels were rapidly formed under physiological conditions and generated N2 gas as a by-product, which led to the formation of porous structures within the hydrogel networks. A NIR dye, indocyanine green (ICG) and chemotherapeutic doxorubicin (DOX) were co-encapsulated in the porous network of the hydrogels. Upon NIR-irradiation, the hydrogels showed spatiotemporal release of encapsulated DOX (>96 %) owing to the cleavage of thioketal bonds by interacting with ROS generated from ICG, whereas minimal release of encapsulated DOX (<25 %) was observed in the absence of NIR-light. The in vitro cytotoxicity results revealed that the hydrogels were highly cytocompatible and did not induce any toxic effect on the HEK-293 cells. In contrast, the DOX + ICG-encapsulated hydrogels enhanced the chemotherapeutic effect and effectively inhibited the proliferation of Hela cancer cells when irradiated with NIR-light.

Recent progresses in natural based therapeutic materials for Alzheimer's disease

Alzheimer's disease is a neurological disorder that causes increased memory loss, mood swings, behavioral disorders, and disruptions in daily activities. Polymer scaffolds for the brain have been grown under laboratory, physiological, and pathological circumstances because of the limitations of conventional treatments for patients with central nervous system diseases. The blood-brain barrier prevents medications from entering the brain, challenging AD treatment. Numerous biomaterials such as biomolecules, polymers, inorganic metals, and metal oxide nanoparticles have been used to transport therapeutic medicines into the nervous system. Incorporating biocompatible materials that support neurogenesis through a combination of topographical, pharmacological, and mechanical stimuli has also shown promise for the transfer of cells to replenish dopaminergic neurons. Components made of naturally occurring biodegradable polymers are appropriate for the regeneration of nerve tissue. The ability of natural-based materials (biomaterials) has been shown to promote endogenous cell development after implantation. Also, strategic functionalization of polymeric nanocarriers could be employed for treating AD. In particular, nanoparticles could resolve Aβ aggregation and thus help cure Alzheimer's disease. Drug moieties can be effectively directed to the brain by utilizing nano-based systems and diverse colloidal carriers, including hydrogels and biodegradable scaffolds. Notably, early investigations employing neural stem cells have yielded promising results, further emphasizing the potential advancements in this field. Few studies have fully leveraged the combination of cells with cutting-edge biomaterials. This study provides a comprehensive overview of prior research, highlighting the pivotal role of biomaterials as sophisticated drug carriers. It delves into various intelligent drug delivery systems, encompassing pH and thermo-triggered mechanisms, polymeric and lipid carriers, inorganic nanoparticles, and other vectors. The discussion synthesizes existing knowledge and underscores the transformative impact of these biomaterials in devising innovative strategies, augmenting current therapeutic methodologies, and shaping new paradigms in the realm of Alzheimer's disease treatment.

A temperature and pressure dual-responsive, stretchable, healable, adhesive, and biocompatible carboxymethyl cellulose-based conductive hydrogels for flexible wearable strain sensor

The study aimed to develop a novel temperature and pressure dual-responsive conductive hydrogel with self-healing, self-adhesive, biocompatible, and stretchable properties, for the development of multifunctional anti-counterfeiting and wearable flexible electronic materials. A conductive hydrogel based on carboxymethyl cellulose (CMC) was synthesized by simple "one pot" free radical polymerization of CMC, acrylamide (AAm) and acrylic acid (AAc). The hydrogel displayed temperature responsiveness and possessed an upper critical solution temperature (UCST) value. In addition, hydrogels also had surprising pressure responsiveness. The synthesized hydrogels were characterized by FTIR, TGA, DSC, and XRD analysis. Importantly, the obtained hydrogels exhibited exceptional mechanical properties (stress: 730 kPa, strain: 880%), fatigue resistance, stretchability, self-healing capability, self-adhesive properties, and conductivity. In addition, valuable insights were obtained into the synthesis and application of flexible anti-counterfeiting and camouflage materials by the temperature and pressure dual-responsive hydrogels. Moreover, the prepared hydrogel, with an electrically sensitive perception of external strain (GF = 2.61, response time: 80 ms), can be utilized for monitoring human movement, emotional changes, physiological signals, language, and more, rendering it suitable for novel flexible anti-counterfeiting materials and versatile wearable iontronics. Overall, this study provided novel insights into the simple and efficient synthesis and sustainable manufacturing of environmentally friendly multifunctional anti-counterfeiting materials and flexible electronic skin sensors.

Cellulose modification for sustainable polymers: overcoming problems of solubility and processing

Two new water-soluble cellulose derivatives were prepared by a two-step transformation with 1,3-propane sultone, followed by either maleic or succinic anhydride, thereby converting cellulose into a more easily processable form. It was found that the solubility was dependent on both the degree of substitution and the chemical properties of the substituents. The water-soluble cellulose has a molecular weight greater than 100 000 g mol-1 and both the morphology and molecular weight can be tuned by varying the reaction conditions. Furthermore, the flexible, two-step nature of the process allows for expansion of this methodology in order to prepare cellulose analogues for different applications.

Enhancing protein delivery for tissue regeneration: Development of AGR2-loaded hydrogels with controlled release properties

The growth factor Anterior Gradient 2 (AGR2) has been shown to have an effective role in tissue regeneration, but remained largely unexplored in localized tissue engineering applications. Alginate beads have been proven as safe carriers for protein encapsulation, but they suffer from fragility and uncontrolled protein release. For such alginate systems, little is known about how changes in concentrations and ion-crosslinking affect protein release and accumulation in 3-D matrices. To address these questions, an engineered interpenetrating polymer network (IPN) has been used to synthesize a novel hybrid system consisting of AGR2 loaded beads composed of calcium-crosslinked sodium alginate (SA) and carboxymethyl cellulose (CMC). These beads are embedded in films consisting of SA and polyvinyl alcohol (PVA), using a simple ion gelation technique. We assess protein release kinetics and accumulation within the hybrid system by varying polymer concentrations and cross-linking parameters. The IPN hybrid system maintains controlled release over two weeks, without an initial burst period. Through this approach efficicnt delivery of AGR2 is achieved which in turn effectively mediates cell migration and proliferation, resulting in excellent cell viability and complete wound closure. The described release system opens new perspectives in tissue engineering.

A comparison between hyaluronic acid and other single ingredient eye drops for dry eye, a review

Dry eye disease (DED) is a highly prevalent and debilitating condition. Hyaluronic acid (HA) is a naturally occurring glycosaminoglycan that has a long history as a safe and effective DED treatment. HA is frequently used as a comparator when assessing other topical DED treatments. This study aims to summarise and critically evaluate the literature describing all isolated active ingredients that have been directly compared with HA in the treatment of DED. A literature search was conducted in Embase using Ovid on the 24th of August 2021 and in PubMed including MEDLINE on the 20th of September 2021. Twenty-three studies met the inclusion criteria, 21 of which were randomised controlled trials. Seventeen different ingredients representing six treatment categories were compared with HA treatment. Most measures showed no significant difference between treatments, suggesting either equivalency of treatments or that studies were underpowered. Only two ingredients were represented in more than two studies; carboxymethyl cellulose treatment appears equivalent to HA treatment, while Diquafosol treatment appears superior to HA treatment. Drop-frequency varied from one to eight drops daily. No single study explained the choice of drop frequency. Nine studies used a HA concentration of 0.1% which may be below therapeutic levels. Nine studies reported using preserved formulations, six of them with differences in preservatives between the compared groups. Thirteen studies were financially linked to industry. No major complications were reported. Studies were not designed to find differences in treatment effects for different types or severities of DED. HA is a good comparator treatment when assessing other DED treatments, although consensus after decades of use is still lacking for best choice of concentration, molecular weight and drop tonicity. Well-designed studies are needed to determine an evidence-based standard for HA treatment to be used as comparator.

A ternary composite hydrogel based on sodium alginate, carboxymethyl cellulose and copper-doped 58S bioactive glass promotes cutaneous wound healing in vitro and in vivo

Hydrogels offer a novel approach to wound repair. In this study, we synthesized a ternary composite using sodium alginate (SA), carboxymethyl cellulose (CMC) and copper-doped 58S bioactive glass (BG). According to our mechanical testing results, the composite made of 7 wt% CMC and 7 wt% BG (SA-7CMC-7BG) showed optimal properties. In addition, our in vitro studies revealed the biocompatibility and bioactivity of SA-7CMC-7BG, with a negative zeta potential of -31.7 mV. Scanning electron microscope (SEM) images showed 273-μm-diameter pores, cell adhesion, and anchoring. The SA-7CMC-7BG closed 90.4 % of the mechanical scratch after 2 days. An in vivo wound model using Wistar rats showed that SA-7CMC-7BG promoted wound healing, with 85.57 % of the wounds healed after 14 days. Treatment with the SA-7CMC-7BG hydrogel caused a 1.6-, 65-, and 1.87-fold increase in transforming growth factor beta (TGF-β), Col I, and vascular endothelial growth factor (VEGF) expression, respectively that prevents fibrosis and promotes angiogenesis. Furthermore, interleukin 1β (IL-1β) expression was downregulated by 1.61-fold, indicating an anti-inflammatory effect of SA-7CMC-7BG. We also observed an increase in epidermal thickness, the number of fibroblast cells, and collagen deposition, which represent complementary pathology results confirming the effectiveness of the SA-7CMC-7BG hydrogel in cutaneous wound healing.

Recent advances in carboxymethyl cellulose-based active and intelligent packaging materials: A comprehensive review

Researchers have concentrated on innovative approaches to increase the shelf life of perishable food products and monitor their quality during storage and transportation as consumer demand for safe, environmentally friendly, and effective packaging develops. This comprehensive review aims to provide an overview of recent developments in carboxymethyl cellulose (CMC) chemical synthesis and its applications in active and intelligent packaging materials. It explores various methods for modifying cellulose to produce CMC and highlights the unique properties that make it suitable for addressing packaging industry challenges. The integration of CMC into active packaging systems, which helps reduce food waste and enhance food preservation, is discussed in depth. Furthermore, the integration of CMC in smart sensors and indicators for real-time monitoring and quality assurance in intelligent packaging is examined. The chemical synthesis of CMC and strategies to optimise its properties were studied, and the review concluded by examining the challenges and prospects of CMC-based packaging in the industry. This review is intended to serve as a valuable resource for researchers, industry professionals, and policymakers interested in the evolving landscape of CMC and its role in shaping the future of packaging materials.

Evaluation of Novel Preformed Particle Gel System for Conformance Control in Mature Oil Reservoirs

To address challenges associated with excessive water production in mature oil reservoirs, this study introduces a carboxymethyl cellulose (CMC)-based material as a novel preformed particle gel (PPG) designed to plug excessive water pathways and redistribute the subsequent injected water toward unswept zones. Through microwave-assisted grafting copolymerization of CMC with acrylamide (AM), we successfully generated multi-sized dry particles within the range of 250-800 µm. Comprehensive analyses, including Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), have confirmed the chemical composition and morphology of the resulting carboxymethyl cellulose-grafted crosslinked polyacrylamide (CMC/PAMBA). Swelling kinetics and rheology tests were conducted to confirm the ability of this novel PPG system to perform at different reservoir conditions. The results of core flooding experiments showed that the CMC/PAMBA PPG is capable of plugging open fractures with a water breakthrough pressure gradient of up to 144 psi/ft. This preformed particle gel (PPG) system was designed specifically for application in Middle East reservoirs, which are distinguished by high salinity and elevated temperature levels. This PPG system is able to swell up to 10 times its original size in seawater and maintain a strength of about 1300 Pa at a temperature of 80 °C. Further optimization is conceivable to enhance injection efficiency and achieve superior plugging outcomes.

Pd@HKUST-1@Cu(II)/CMC composite bead as an efficient synergistic bimetallic catalyst for Sonogashira cross-coupling reactions

We fabricated an efficient Pd@HKUST-1@Cu(II)/CMC composite bead catalyst through an innovative strategy based on the unique properties of metal-organic frameworks (MOFs) and carboxymethylcellulose (CMC). In this strategy, HKUST-1 MOFs were grown in-situ on the surface of micrometer-sized Cu-based CMC beads (Cu(II)/CMC), then Pd(II) ions were incorporated into the pores of the MOF and further be partially reduced to Pd(0) NPs, which is an active species for oxidative addition with aryl halides in Sonogashira reactions. The micron-sized Cu(II)/CMC beads were formed through inter/intramolecularly crosslinking facilitated by Cu(II) ions, which was achieved by the metathesis of Cu(II) with numerous carboxylic groups of CMC. Such Cu(II)/CMC bead offers many Cu(II) ions as interaction sites for in-situ nucleation and growth of HKUST-1 MOFs. The architecture and composition of the prepared Pd@HKUST-1@Cu(II)/CMC composite were fully verified by various techniques such as FTIR, XRD, TGA, BET, XPS, SEM, TEM, EDX, and elemental mapping analysis. This novel composite bead was applied as an efficient and reusable heterogeneous Pd/Cu bimetallic catalyst for Sonogashira reactions, decarbonylative Sonogashira reaction, and Sonogashira cyclization tandem reactions. The catalyst is readily isolated by simple filtration, and can be reused for five consecutive runs with retaining its activity and structural integrity.

From Ocean to Medicine: Harnessing Seaweed's Potential for Drug Development

Seaweed, a miscellaneous group of marine algae, has long been recognized for its rich nutritional composition and bioactive compounds, being considered nutraceutical ingredient. This revision delves into the promising role of seaweed-derived nutrients as a beneficial resource for drug discovery and innovative product development. Seaweeds are abundant sources of essential vitamins, minerals, polysaccharides, polyphenols, and unique secondary metabolites, which reveal a wide range of biological activities. These bioactive compounds possess potential therapeutic properties, making them intriguing candidates for drug leads in various medical applications and pharmaceutical drug development. It explores their pharmacological properties, including antioxidant, anti-inflammatory, antimicrobial, and anticancer activities, shedding light on their potential as therapeutic agents. Moreover, the manuscript provides insights into the development of formulation strategies and delivery systems to enhance the bioavailability and stability of seaweed-derived compounds. The manuscript also discusses the challenges and opportunities associated with the integration of seaweed-based nutrients into the pharmaceutical and nutraceutical industries. Regulatory considerations, sustainability, and scalability of sustainable seaweed sourcing and cultivation methods are addressed, emphasizing the need for a holistic approach in harnessing seaweed's potential. This revision underscores the immense potential of seaweed-derived compounds as a valuable reservoir for drug leads and product development. By bridging the gap between marine biology, pharmacology, and product formulation, this research contributes to the critical advancement of sustainable and innovative solutions in the pharmaceutical and nutraceutical sectors.

Citric acid cross-linked β-cyclodextrins: A review of preparation and environmental/biomedical application

The β-cyclodextrins (β-CD) are biocompatible macrocyclic candidates for the preparation of various composites with enhanced functions. While nontoxic and biodegradable citric acid (CA) is the favorite crosslinking agent for fabricating hierarchical advanced structures. The carboxyl and hydroxyl groups on CA can serve as "structural bridges" and enhance the solubility of β-CD. Leading to the construction of CA cross-linked β-CD with marvelous complicated structures and targeted functions. Here, we directly categorized the grafted composite materials into two main types such as organic and inorganic materials. Particularly, some representative composite materials are listed and analyzed in detail according to their preparation, advantages of unique characteristics, as well as the possible applications in environmental and biomedical fields such as adsorption of pollutants, sensors, and biomedical applications.

Crosslinked carboxymethyl cellulose colloidal solution for cotton thread coating in wound dressing: A rheological study

Cotton thread therapeutic properties as a wound dressing can be enhanced by utilising carboxymethyl cellulose-nanoparticles (CMC/NPs) colloidal solution as a coating solution. Nanoparticles such as graphene oxide (GO), graphene quantum dots (GQD), and silver nanoparticles (AgNP) stability in CMC was investigated through the rheological analysis and UV-Vis spectroscopy of the colloidal solutions. Citric acid (CA) acted as a crosslinker and was utilised to crosslink the colloidal solution with cotton thread. These CMC/NPs coated threads were subjected to mechanical properties and antibacterial activity analysis. Results obtained indicate less nanoparticle agglomeration and were stable in the CMC-based nanofluid. CMC/NPs rheological study suggested that colloidal solutions exhibited shear thinning behaviour and behaved as non-Newtonian fluids with n < 1. Crosslinked CMC/NPs appeared in a gel-like state as the viscoelasticity of the solution increased. Among the colloidal solutions, CMC/AgNP showed the highest enhancement with a significant difference at p < 0.05 in terms of mechanical and antibacterial properties. Consequently, the rheological properties and stability of CMC/NPs might influence the coating solution's appearance and refine the cotton thread's microstructure for a functional wound dressing to be further utilised as a coating solution for antibacterial cotton thread wound dressing material.

Solvent-less carboxymethylation-induced electrostatic crosslinking of chitosan

The successful N-carboxymethylation and concomitant crosslinking of solid chitosan upon heating its mixture with solid monochloroacetic acid, without the use of solvents or catalysts, is reported. The N-carboxymethylation was confirmed through the analysis of the partially depolymerized product using NMR spectroscopy, as well as a control reaction with lysine. This transformation was facilitated by the nucleophilic nature of the free amine group in the repeating unit of chitosan, which possesses lone pair of electrons capable of attacking the carbon center bearing the leaving group and displacing the leaving group in a concerted manner. The crosslinking, on the other hand, was established by the observed insolubility in aqueous acidic solutions, even when subjected to prolonged heating at 60 °C. This crosslinking occurs due to the electrostatic interactions between the carboxylate groups and the adjacent ammonium groups, as supported by evidence from FTIR spectroscopy and a control reaction involving ethyl chloroacetate. The resulting crosslinked carboxymethyl chitosan demonstrated its usefulness in the adsorption of methyl orange and fluorescein, as well as functioning as an organic catalyst for aza-Michael addition, Hantzsch reaction, and substituted perimidine synthesis.

Rheological insights on Carboxymethyl cellulose hydrogels

Hydrogels are copiously studied for tissue engineering, drug delivery, and bone regeneration owing to their water content, mechanical strength, and elastic behaviour. The preparation of stable and mechanically strengthened hydrogels without using toxic crosslinkers and expensive approaches is immensely challenging. In this study, we prepared Carboxymethyl cellulose based hydrogels with different polymer concentration via a less expensive physical crosslinking approach without using any toxic crosslinkers and evaluated their mechanical strength. In this hydrogel system, the carbopol concentration was fixed at 1 wt/v% and the Carboxymethyl cellulose concentration was varied between 1 and 5 wt/v%. In this hydrogel system, Carbopol serves as the crosslinker to bridge Carboxymethyl cellulose polymer through hydrogen bonds. Rheological analysis was employed in assessing the mechanical properties of the prepared hydrogel, in particular, the viscoelastic behaviour of the hydrogels. The viscoelastic nature and mechanical strength of the hydrogels increased with an increase in the Carboxymethyl cellulose polymer concentration. Further, our results suggested that gels with Carboxymethyl cellulose concentration between 3 wt/v % and 4 wt/v % with yield stresses of 58.83 Pa and 81.47 Pa, respectively, are potential candidates for use in transdermal drug delivery. The prepared hydrogels possessed high thermal stability and retained their gel network structure even at 50 °C. These findings are beneficial for biomedical applications in transdermal drug delivery and tissue engineering owing to the biocompatibility, stability, and mechanical strength of the prepared hydrogels.

Effects of carboxymethyl cellulose fiber formations with chitosan incorporation via coating and mixing processes

To date, the utilization of carboxymethyl cellulose (CMC) fibers are only restricted to weak mechanical application such as wound dressing. Physically, CMC has a weak mechanical strength due to the high hydrophilicity trait. However, this flaw was saved by the extensive number of reactive functional groups, allowing this macromolecule to form linkages with chitosan to ensure its versatility. This work successfully fabricated CMC-chitosan fiber via dissolution, crosslinking, dry-jet wet-spinning extrusion, and coagulation processes. Chitosan was constituted with CMC fiber in two approaches, coating, and inclusion at various concentrations. Morphologically, chitosan incorporation has triggered agglomerations and roughness toward CMC fibers (CMCF). Chemically, the interaction between CMC and chitosan was proved through FTIR analysis at peaks 1245 cm-1 (ECH covalent crosslinking), while 3340 cm-1 and 1586 cm-1 were due to ionic and hydrogen bonding. The result from analysis showed that at higher chitosan concentrations, the chitosan-included CMC fiber (CMCF-I) and chitosan-coated CMC fiber (CMFC) were mechanically enhanced (up to 86.77 and 82.72 MPa), thermally more stable (33 % residual mass), and less hydrophilic compared to the plain CMCF. The properties of CMC-chitosan fibers have opened up vast possible applications, especially as a reinforcement in a watery medium such as a hydrogel.

Influence of Carboxymethyl Cellulose on the Green Synthesis of Gold Nanoparticles Using Gliricidia sepium and Petiveria alliacea Extracts: Surface-Enhanced Raman Scattering Effect Evaluation

Gold nanoparticles (AuNPs) were synthesized and stabilized using ecological strategies: the extracts of the leaves of the plants Gliricidia sepium (GS) and Petiveria alliacea (PA) reduced the metallic Au ions to AuNPs. The AuNPs were analyzed as surface-enhanced Raman scattering (SERS) substrates for pyridoxine detection (vitamin B6). UV-vis spectroscopy was carried out to assess the stability of the AuNPs. As a result, absorption bands around 530 and 540 nm were obtained for AuNPs-PA and AuNPs-GS, respectively. Both cases associated it with localized surface plasmon resonance (LSPR). In the final stage of the synthesis, to stabilize the AuNPs, carboxymethyl cellulose (CMC) was added; however, LSPR bands do not exhibit bathochromic or hypsochromic shifts with the addition of CMC. Transmission electron microscopy (TEM) micrographs show relatively spherical morphologies; the particle diameters were detected around 7.7 and 12.7 nm for AuNPs-PA and AuNPs-GS, respectively. The nanomaterials were evaluated as SERS substrates on pyridoxine, revealing an intensification in the vibrational mode centered at 688 cm-1 associated with the pyridinic ring. Complementarily, different density functional theory functionals were included to obtain molecular descriptors on the Aun-cluster-pyridoxine interaction to study the SERS behavior.

Methacrylated Cellulose Nanocrystals as Fillers for the Development of Photo-Cross-Linkable Cytocompatible Biosourced Formulations Targeting 3D Printing

Cellulose nanocrystals (CNCs) from cotton were functionalized in aqueous medium using methacrylic anhydride (MA) to produce methacrylated cellulose nanocrystals (mCNCs) with a degree of methacrylation (DM) up to 12.6 ± 0.50%. Dispersible as-prepared CNCs and mCNCs were then considered as reinforcing fillers for aqueous 3D-printable formulations based on methacrylated carboxymethylcellulose (mCMC). The rheological properties of such photo-cross-linkable aqueous formulations containing nonmodified CNCs or mCNCs at 0.2 or 0.5 wt% in 2 wt% mCMC were fully investigated. The influence of the presence of nanoparticles on the UV-curing kinetics and dimensions of the photo-cross-linked hydrogels was probed and 13C CP-MAS NMR spectroscopy was used to determine the maximum conversion ratio of methacrylates as well as the optimized time required for UV postcuring. The viscoelasticity of cross-linked hydrogels and swollen hydrogels was also studied. The addition of 0.5 wt% mCNC with a DM of 0.83 ± 0.040% to the formulation yielded faster cross-linking kinetics, better resolution, more robust cross-linked hydrogels, and more stable swollen hydrogels than pure mCMC materials. Additionally, the produced cryogels showed no cytotoxicity toward L929 fibroblasts. This biobased formulation could thus be considered for the 3D printing of hydrogels dedicated to biomedical purposes using vat polymerization techniques, such as stereolithography or digital light processing.

Eco-Friendly Boost for Perovskite Photovoltaics: Harnessing Cellulose-Modified SnO2 as a High-Performance Electron Transporting Material

In this study, a passivated tin oxide (SnO2) film is successfully obtained through the implementation of sodium carboxymethyl cellulose (Na-CMC) modifier agent and used as the electron transporting layer (ETL) within the assembly of perovskite solar cells (PSCs). The strategic incorporation of the Na-CMC modifier agent yields discernible enhancements in the optoelectronic properties of the ETL. Among the fabricated cells, the champion cell based on Na-CMC-complexed SnO2 ETL achieves a conversion efficiency of 22.2% with an open-circuit voltage (VOC) of 1.12 V, short-circuit current density (JSC) of 24.57 mA/cm2, and fill factor (FF) of 80.6%. On the other hand, these values are measured for the pristine SnO2 ETL-based control cell as VOC = 1.11 V, JSC = 23.59 mA/cm2, and FF = 76.7% with an efficiency of 20.1%. This improvement can be ascribed to the high charge extraction ability, higher optical transmittance, better conductivity, and decrease in the trap state density associated with the passivated ETL structure. In addition, the cells employing Na-CMC-complexed SnO2 ETL exhibit prolonged stability under ambient conditions during 2000 h. Based on the preliminary results, this study also presents a set of findings that could have substantial implications for the potential use of the Na-CMC molecule in both large-scale perovskite cells and perovskite/Si tandem configuration.

Fabrication of dissolving microneedles for transdermal delivery of protein and peptide drugs: polymer materials and solvent casting micromoulding method

Proteins and peptides are rapidly developing pharmaceutical products and are expected to continue growing in the future. However, due to their nature, their delivery is often limited to injection, with drawbacks such as pain and needle waste. To overcome these limitations, microneedles technology is developed to deliver protein and peptide drugs through the skin. One type of microneedles, known as dissolving microneedles, has been extensively studied for delivering various proteins and peptides, including ovalbumin, insulin, bovine serum albumin, polymyxin B, vancomycin, and bevacizumab. This article discusses polymer materials used for fabricating dissolving microneedles, which are poly(vinylpyrrolidone), hyaluronic acid, poly(vinyl alcohol), carboxymethylcellulose, GantrezTM, as well as other biopolymers like pullulan and ulvan. The paper is focused solely on solvent casting micromoulding method for fabricating dissolving microneedles containing proteins and peptides, which will be divided into one-step and two-step casting micromoulding. Additionally, future considerations in the market plan for dissolving microneedles are discussed in this article.

Decellularized allogeneic cartilage paste with human costal cartilage and crosslinked hyaluronic acid-carboxymethyl cellulose carrier augments microfracture for improved articular cartilage repair

Articular cartilage lacks natural healing abilities and necessitates surgical treatments for injuries. While microfracture (MF) is a primary surgical approach, it often results in the formation of unstable fibrocartilage. Delivering hyaline cartilage directly to defects poses challenges due to the limited availability of autologous cartilage and difficulties associated with allogeneic cartilage delivery. We developed a decellularized allogeneic cartilage paste (DACP) using human costal cartilage mixed with a crosslinked hyaluronic acid (HA)-carboxymethyl cellulose (CMC) carrier. The decellularized allogeneic cartilage preserved the extracellular matrix and the nanostructure of native hyaline cartilage. The crosslinked HA-CMC carrier provided shape retention and moldability. In vitro studies confirmed that DACP did not cause cytotoxicity and promoted migration, proliferation, and chondrogenic differentiation of human bone marrow-derived mesenchymal stem cells. After 6 months of implantation in rabbit knee osteochondral defects, DACP combined with MF outperformed MF alone, demonstrating improved gait performance, defect filling, morphology, extracellular matrix deposition, and biomechanical properties similar to native cartilage. Thus, DACP offers a safe and effective method for articular cartilage repair, representing a promising augmentation to MF. STATEMENT OF SIGNIFICANCE: Directly delivering hyaline cartilage to repair articular cartilage defects is an ideal treatment. However, current allogeneic cartilage products face delivery challenges. In this study, we developed a decellularized allogeneic cartilage paste (DACP) by mixing human costal cartilage with crosslinked hyaluronic acid (HA)-carboxymethyl cellulose (CMC). DACP preserves extracellular matrix components and nanostructures similar to native cartilage, with HA-CMC ensuring shape retention and moldability. Our study demonstrates improved cartilage repair by combining DACP with microfracture, compared to microfracture alone, in rabbit knee defects over 6 months. This is the first report showing better articular cartilage repair using decellularized allogeneic cartilage with microfracture, without the need for exogenous cells or bioactive substances.

On the Mechanism of the Ionizing Radiation-Induced Degradation and Recycling of Cellulose

The use of ionizing radiation offers a boundless range of applications for polymer scientists, from inducing crosslinking and/or degradation to grafting a wide variety of monomers onto polymeric chains. This review in particular aims to introduce the field of ionizing radiation as it relates to the degradation and recycling of cellulose and its derivatives. The review discusses the main mechanisms of the radiolytic sessions of the cellulose molecules in the presence and absence of water. During the radiolysis of cellulose, in the absence of water, the primary and secondary electrons from the electron beam, and the photoelectric, Compton effect electrons from gamma radiolysis attack the glycosidic bonds (C-O-C) on the backbone of the cellulose chains. This radiation-induced session results in the formation of alkoxyl radicals and C-centered radicals. In the presence of water, the radiolytically produced hydroxyl radicals (●OH) will abstract hydrogen atoms, leading to the formation of C-centered radicals, which undergo various reactions leading to the backbone session of the cellulose. Based on the structures of the radiolytically produced free radicals in presence and absence of water, covalent grafting of vinyl monomers on the cellulose backbone is inconceivable.

Preparation and In Vitro Evaluation of Levofloxacin-Loaded Floating Tables Using Various Rate-Controlling Agents

Floating tablets are a new approach to extending the time a drug is in the stomach to improve therapy outcomes. Floating tablets were formulated with the drug, the polymers hydroxypropyl methylcellulose (HPMC), carboxymethyl cellulose (CMC), and starch, fillers, and lubricants. The tablets were prepared using the direction compression method. The tablets' physical quality control tests were found to be within acceptable limits. The tablets extended drug release up to 12 h and were uniform in their drug contents. The swelling index of the tablets ranged from 60 ± 0.11 to 66 ± 0.14%, and the tablets were less dense than water. The floating lag time (10 ± 0.23 to 16 ± 0.09 s) and total floating time (>12 h) showed good floating behaviors. The kinetic modeling showed that the drug was released from the tablets by pseudo-diffusion, swelling, erosion, or anomalous non-Fickian diffusion. F6 (starch and CMC) showed higher n values (0.994 ± 0.04), exhibiting pseudo-zero-order drug release kinetics compared to those of other tablets. The dissolution data of the test and reference tables were not similar (P > 0.05). In terms of antimicrobial activity, the zones of inhibition of the test F6 tablet powders (5.3 ± 0.08 mm) and the reference tablet powders (5.9 ± 0.13 mm) were found to be significantly similar (P > 0.05). The study concluded that these floating tablets can improve the gastric residence time and therapeutic outcomes.

Poultices as biofilms of titanium dioxide nanoparticles/carboxymethyl cellulose/Phytagel for cleaning of infected cotton paper by Aspergillus sydowii and Nevskia terrae

In this study, TiO2 nanoparticle (TiO2NP)-coated film was produced to protect manuscripts against microorganisms using ecofriendly benign materials. As a result, a simple method was created that uses poultice biofilm made of carboxymethyl cellulose (CMC) and Phytagel plant cell (PGP) loaded with TiO2NPs to preserve manuscripts against microbes in an environmentally responsible way. Three volumes (1, 2, 4 mL) of TiO2NPs were put into a biofilm combination to produce the poultices known as CMC/PGP/TiO2-1, CMC/PGP/TiO2-2, and CMC/PGP/TiO2-3. The synthesized TiO2NPs were nearly spherical in shape, small in size (98 nm), and stable (zeta potential value - 33 mV). The results showed that the unique deposition of TiO2NPs on the biofilm surface gave the produced films loaded with TiO2NPs a rough structure. The highest values of mechanical characteristics were determined to be in CMC/PGP/TiO2-1 with values of 25.4 g, 6.6 MPa, and 11.4%, for tensile strength, elongation at break, and tear strength, respectively. Based on molecular identification, the fungus Aspergillus sydowii and the bacterium Nevskia terrae, with accession numbers MG991624 and AB806800, respectively, were isolated and identified from an antiquated manuscript formed from cellulosic fibers. Before the experiments, the produced cotton paper samples were aged, and then, one group was infected for 6 months by A. sydowii and the second group with N. terrae. Following the preparation of a CMC/PGP biofilm loaded with various volumes of TiO2NPs, poultices were applied to infected cotton paper in order to clean it. The infected cotton paper was placed inside the sandwich-like poultices that were created. The poultice CMC/PGP/TiO2-2 demonstrated potential for preventing the growth of A. sydowii and N. terrae-infected cotton paper, when the fibers were saved, cleaned, and coated with CMC/PGP/TiO2-2 after absorbing the fungus and the bacterium and exhibiting exceptional antimicrobial activities. Finally, the novel biofilms have demonstrated their capacity to lessen microbial contamination of cotton paper. In order to generalize the usage of these poultices, it is also advised that they be produced on a large scale and tested on a variety of organic materials in the future.

Evaluation of adsorption performance and mechanisms of a highly effective 3D boron-doped graphene composite for amitriptyline pharmaceutical removal

Three-dimensional heteroatom-doped graphene presents a state-of-the-art approach for effective remediation of pharmaceutical wastewater on account of its distinguished adsorption and physicochemical attributes. Amitriptyline is an emerging tricyclic antidepressant pollutant posing severe risks to living habitats through water supply and food chain. With ultra-large surface area and plentiful chemical functional groups, graphene oxide is a favorable adsorbent for decontaminating polluted water. Herein, a new boron-doped graphene oxide composite reinforced with carboxymethyl cellulose was successfully developed via solution-based synthesis. Characterization study revealed that the adsorbent was formed by graphene sheets intertwined into a porous network and engrafted with 13.37 at% of boron. The adsorbent has a zero charge at pH 6 and contained various chemical functional groups favoring the attachment of amitriptyline. It was also found that a mere 10 mg of adsorbent was able to achieve relatively high amitriptyline removal (89.31%) at 50 ppm solution concentration and 30 °C. The amitriptyline adsorption attained equilibrium within 60 min across solution concentrations ranging from 10 to 300 ppm. The kinetic and equilibrium of amitriptyline adsorption were well correlated to the pseudo-second-order and Langmuir models, respectively, portraying the highest Langmuir adsorption capacity of 737.4 mg/g. Notably, the predominant mechanism was chemisorption assisted by physisorption that contributed to the outstanding removal of amitriptyline. The saturated adsorbent was sufficiently regenerated using ethanol eluent. The results highlighted the impressive performance of the as-synthesized boron-doped adsorbent in treating amitriptyline-containing waste effluent.

Biopolymer-Polysiloxane Double Network Aerogels

A new series of transparent aerogels of biopolymer-polysiloxane double networks is reported. Biopolymer aerogels have attracted much attention from green and sustainable aspects but suffered from strong hydrophilicity and difficulty to make homogeneous structures in nanoscale; these drawbacks are overcome by compositing with a polysiloxane network. Alginate-polymethylsilsesquioxane aerogel has high optical transparency, water repellency, comparable superinsulation property and improved bending flexibility compared to pure polymethylsilsesquioxane aerogel. The nanoscale homogeneity is realized by separating the crosslinking steps for two networks in a sequential protocol: condensation of siloxane bonds and metal-crosslinking of biopolymer. The crosslinking order, biopolymer-first or siloxane-first, and universality/limitation of biopolymer-crosslinker pairs are discussed to construct fundamental chemistry of double network systems for their further application potentials.

Dissolving and Swelling Hydrogel-Based Microneedles: An Overview of Their Materials, Fabrication, Characterization Methods, and Challenges

Polymeric hydrogels are a complex class of materials with one common feature-the ability to form three-dimensional networks capable of imbibing large amounts of water or biological fluids without being dissolved, acting as self-sustained containers for various purposes, including pharmaceutical and biomedical applications. Transdermal pharmaceutical microneedles are a pain-free drug delivery system that continues on the path to widespread adoption-regulatory guidelines are on the horizon, and investments in the field continue to grow annually. Recently, hydrogels have generated interest in the field of transdermal microneedles due to their tunable properties, allowing them to be exploited as delivery systems and extraction tools. As hydrogel microneedles are a new emerging technology, their fabrication faces various challenges that must be resolved for them to redeem themselves as a viable pharmaceutical option. This article discusses hydrogel microneedles from a material perspective, regardless of their mechanism of action. It cites the recent advances in their formulation, presents relevant fabrication and characterization methods, and discusses manufacturing and regulatory challenges facing these emerging technologies before their approval.

Recent Trends in Macromolecule-Based Approaches for Hair Loss Treatment

Macromolecules are large, complex molecules composed of smaller subunits known as monomers. The four primary categories of macromolecules found in living organisms are carbohydrates, lipids, proteins, and nucleic acids; they also encompass a broad range of natural and synthetic polymers. Recent studies have shown that biologically active macromolecules can help regenerate hair, providing a potential solution for current hair regeneration therapies. This review examines the latest developments in the use of macromolecules for the treatment of hair loss. The fundamental principles of hair follicle (HF) morphogenesis, hair shaft (HS) development, hair cycle regulation, and alopecia have been introduced. Microneedle (MN) and nanoparticle (NP) delivery systems are innovative treatments for hair loss. Additionally, the application of macromolecule-based tissue-engineered scaffolds for the in vitro and in vivo neogenesis of HFs is discussed. Furthermore, a new research direction is explored wherein artificial skin platforms are adopted as a promising screening method for hair loss treatment drugs. Through these multifaceted approaches, promising aspects of macromolecules for future hair loss treatments are identified.

Injectable hydrogel based on silk fibroin/carboxymethyl cellulose/agarose containing polydopamine functionalized graphene oxide with conductivity, hemostasis, antibacterial, and anti-oxidant properties for full-thickness burn healing

Overcoming bacterial infections and promoting wound healing are significant challenges in clinical practice and fundamental research. This study developed a series of enzymatic crosslinking injectable hydrogels based on silk fibroin (SF), carboxymethyl cellulose (CMC), and agarose, with the addition of polydopamine functionalized graphene oxide (GO@PDA) to endow the hydrogel with suitable conductivity and antimicrobial activity. The hydrogels exhibited suitable gelation time, stable mechanical and rheological properties, high water absorbency, and hemostatic properties. Biocompatibility was also confirmed through various assays. After loading the antibiotic vancomycin hydrochloride, the hydrogels showed sustained release and good antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA). The fast gelation time and desirable tissue-covering ability of the hydrogels allowed for a good hemostatic effect in a rat liver trauma model. In a rat full-thickness burn wound model, the hydrogels exhibited an excellent treatment effect, leading to significantly enhanced wound closure, collagen deposition, and granulation tissue formation, as well as neovascularization and anti-inflammatory effects. In conclusion, the antibacterial electroactive injectable hydrogel dressing, with its multifunctional properties, significantly promoted the in vivo wound healing process, making it an excellent candidate for full-thickness skin wound healing.

Cellulose nanofibers (CNFs) in the recycling of nickel and cadmium battery metals using electrodeposition

Cellulose nanofibers (CNFs) were employed in the aqueous electrodeposition of nickel and cadmium for battery metal recycling. The electrowinning of mixed Ni-Cd metal ion recycling solutions demonstrated that cadmium with a purity of over 99% could be selectively extracted while leaving the nickel in the solution. Two types of CNFs were evaluated: negatively charged CNFs (a-CNF) obtained through acid hydrolysis (-75 μeq. g-1) and positively charged CNFs (q-CNF) functionalized with quaternary ammonium groups (+85 μeq. g-1). The inclusion of CNFs in the Ni-Cd electrolytes induced growth of cm-sized dendrites in conditions where dendrites were otherwise not observed, or increased the degree of dendritic growth when it was already present to a lesser extent. The augmented dendritic growth correlated with an increase in deposition yields of up to 30%. Additionally, it facilitated the formation of easily detachable dendritic structures, enabling more efficient processing on a large scale and enhancing the recovery of the toxic cadmium metal. Regardless of the charged nature of the CNFs, both negatively and positively charged CNFs led to a significant formation of protruding cadmium dendrites. When deposited separately, dendritic growth and increased deposition yields remained consistent for the cadmium metal. However, dendrites were not observed during the deposition of nickel; instead, uniformly deposited layers were formed, albeit at lower yields (20%), when positively charged CNFs were present. This paper explores the potential of utilizing cellulose and its derivatives as the world's largest biomass resource to enhance battery metal recycling processes.

Evaluation of the Effectiveness of an Innovative Polycomponent Formulation on Adult and Aged Human Dermal Fibroblasts

Skin aging is a dynamic process that determines structural alterations in ECM and reduction in dermal fibroblasts. The recent availability on the market of an innovative polycomponent formulation (KARISMA Rh Collagen® FACE, K) containing noncrosslinked high-molecular-weight hyaluronic acid (HMW-HA), a human recombinant polypeptide of collagen-1 alpha chain, and carboxymethyl cellulose (CMC), attracted our scientific interest in evaluating its biomolecular effects on human dermal adult and aged fibroblasts. After treatment with increasing K concentrations, cell proliferation, collagen I, prolyl 4-hydroxylase (P4HA1), an essential protein in collagen biosynthesis, and α-SMA levels were assessed. The fibroblast contractility, TGF-β1 levels, and oxidative stress markers were also evaluated. K formulation exposure led to a significant and dose-dependent increase in the proliferation and migration of adult fibroblasts. Of note, the K exposure counteracted the H2O2-induced aging by promoting cell proliferation, reducing β-galactosidase activity, and neutralizing the aging-associated oxidative damage. Moreover, an increase in collagen I, P4HA1, α-SMA, TGF-β1 levels, and improved contractility of adult and aged fibroblasts were observed after treatment. Overall, our results show evidence that the K treatment is efficacious in improving biological functions in adult fibroblasts and suppressing the biomolecular events associated with H2O2-induced cellular aging, thus supporting the regenerative and bio-revitalizing action of the K formulation helpful in preventing or treating skin aging.

Organic Amendments promote saline-alkali soil desalinization and enhance maize growth

Secondary soil salinization in arid and semi-arid regions is a serious problem that severely hampers local agricultural productivity and poses a threat to the long-term sustainability of food production. the utilization of organic soil amendments presents a promising approach to mitigate yield losses and promote sustainable agricultural production in saline-alkali soil. In this study, we established four distinct treatments, chemical fertilizer (CK), humic acid with chemical fertilizer (HA), carboxymethyl cellulose with chemical fertilizer (CMC), and amino acid with chemical fertilizer (AA), to elucidate their respective impacts on the reclamation of saline soil and the growth of maize. The findings of our study reveal notable variations in desalination rates within the 0-40 cm soil layer due to the application of distinct soil amendments, ranging from 11.66% to 37.17%. Moreover, application of amendments significantly increased the percentage of soil macro-aggregates as compared to the CK treatment. Furthermore, HA and AA treatments significantly augmented soil nutrient content (HA: 48.07%; AA: 39.50%), net photosynthetic rate (HA: 12.68%; AA: 13.94%), intercellular CO2 concentration (HA: 57.20%; AA: 35.93%) and maize yield (HA:18.32%; AA:16.81%). Correlation analysis and structural equation modeling unveiled diverse mechanisms of yield enhancement for HA, CMC, and AA treatments. HA enhanced yield by increasing organic matter and promoting soil aggregate formation, CMC improved soil water content and facilitated salt leaching due to its excellent water-holding properties, while AA increased yield by elevating soil organic matter and effective nitrogen content. Among the array of soil amendment materials scrutinized, HA treatment emerged as the most promising agent for enhancing soil conditions and is thus recommended as the preferred choice for treating local saline soils.

Effect of Bleaching Processes on Physicochemical and Functional Properties of Cellulose and Carboxymethyl Cellulose from Young and Mature Coconut Coir

The objective of this study was to characterize the properties of cellulose and CMC synthesized from young and mature coconut coir with different bleaching times (bleaching for the first time; 1 BT, bleaching for a second time; 2 BT, and bleaching for the third time; 3 BT) using hydrogen peroxide (H2O2). The surface morphology, structural information, chemical compositions, and crystallinity of both cellulose and CMC were determined. H2O2 bleaching can support delignification by reducing hemicellulose and lignin, as evidenced by FTIR showing a sharp peak at wave number 1260 cm-1. The cellulose and CMC from coconut coir can be more dispersed and have greater functional characteristics with increasing bleaching times due to the change in accessibility of hydroxyl groups in the structure. The CMC diffraction patterns of coconut coir after the bleaching process showed the destruction of the crystalline region of the original cellulose. The SEM images showed that the surface of CMC was smoother than that of cellulose. The CMCy had a higher water holding capacity (WHC) compared to the CMCm as the bleaching can increase interaction between the polymer and water molecules. Therefore, the best quality of CMC corresponds to CMCy. Based on these findings, bleaching time has a strong effect on the functional properties of cellulose and CMC from coconut coir.

Effect of Oral Administration of Polyethylene Glycol 400 on Gut Microbiota Composition and Diet-Induced Obesity in Mice

Polyethylene glycol (PEG) is a commonly used dispersant for oral administration of hydrophobic agents. PEG is partly absorbed in the small intestine, and the unabsorbed fraction reaches the large intestine; thus, oral administration of PEG may impact the gut microbial community. However, to the best of our knowledge, no study evaluated the effects of PEG on gut commensal bacteria. Herein, we aimed to determine whether oral administration of PEG modifies the gut microbiota. Administration of PEG400 and PEG4000 altered gut microbial diversity in a concentration-dependent manner. Taxonomic analysis revealed that Akkermansia muciniphila and particularly Parabacteroides goldsteinii were overrepresented in mice administered with 40% PEG. PEG400 administration ameliorated the high-fat diet (HFD)-induced obesity and adipose tissue inflammation. Fecal microbiome transplantation from PEG400-administered donors counteracted the HFD-induced body and epididymal adipose tissue weight gain, indicating that PEG400-associated bacteria are responsible for the anti-obesity effect. Conversely, carboxymethyl cellulose, also used as a dispersant, did not affect the abundance of these two bacterial species or HFD-induced obesity. In conclusion, we demonstrated that oral administration of a high concentration of PEG400 (40%) alters the gut microbiota composition and ameliorates HFD-induced obesity.

5-Amino-8-hydroxyquinoline-containing Electrospun Materials Based on Poly(vinyl alcohol) and Carboxymethyl Cellulose and Their Cu2+ and Fe3+ Complexes with Diverse Biological Properties: Antibacterial, Antifungal and Anticancer

Novel fibrous materials with diverse biological properties containing a model drug of the 8-hydroxyquinoline group-5-amino-8-hydroxyquinoline (5A8Q)-were fabricated using a one-pot method by electrospinning poly(vinyl alcohol) (PVA)/carboxymethyl cellulose (CMC)/5A8Q solutions. Experiments were performed to prepare Cu²⁺ (Fe³⁺) complexes of the crosslinked PVA/CMC/5A8Q materials. The formation of complexes was proven by using scanning electron microscopy (SEM), attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX) and X-ray photoelectron spectroscopy (XPS). The release of 5A8Q and 5A8Q.Cu²⁺ (Fe³⁺) was studied and their in vitro release profiles were mostly impacted by the hydrophilic/hydrophobic properties of the materials. The performed microbiological assays revealed that fibrous materials containing 5A8Q and their complexes exhibited good antibacterial and antifungal efficacy. Their activity was stronger against bacteria S. aureus than against bacteria E. coli and fungi C. albicans. Cell viability tests using MTT showed that the presence of 5A8Q and its complexes in the fibrous materials resulted in a significant decrease in the HeLa and MCF-7 cancer cell viability for the various times of cell incubation. Moreover, the observed cytotoxicity of the mats against cancer cells was greater than that against non-cancer HaCaT keratinocytes. All these properties make the novel materials potential candidates for the design of wound healing materials and as drug delivery systems for local therapy of cervical and breast cancer.

Complexation of Bromelain, Ficin, and Papain with the Graft Copolymer of Carboxymethyl Cellulose Sodium Salt and N-Vinylimidazole Enhances Enzyme Proteolytic Activity

This study investigates the features of interactions between cysteine proteases (bromelain, ficin, and papain) and a graft copolymer of carboxymethyl cellulose sodium salt with N-vinylimidazole. The objective is to understand the influence of this interactions on the proteolytic activity and stability of the enzymes. The enzymes were immobilized through complexation with the carrier. The interaction mechanism was examined using Fourier-transform infrared spectroscopy and flexible molecular docking simulations. The findings reveal that the enzymes interact with the functional groups of the carrier via amino acid residues, resulting in the formation of secondary structure elements and enzyme's active sites. These interactions induce modulation of active site of the enzymes, leading to an enhancement in their proteolytic activity. Furthermore, the immobilized enzymes demonstrate superior stability compared to their native counterparts. Notably, during a 21-day incubation period, no protein release from the conjugates was observed. These results suggest that the complexation of the enzymes with the graft copolymer has the potential to improve their performance as biocatalysts, with applications in various fields such as biomedicine, pharmaceutics, and biotechnology.

Synthetic versus Natural Precursor Layer: A Study on the Properties of Biocompatible Chitosan/Carboxymethyl Cellulose Nanofilms

Polyelectrolyte multilayers are nanofilms with vast applications in numerous areas such as medicine and food industry. Recently, they have been getting a lot of attention as potential food coatings for the prevention of fruit decay during transportation and storage, and therefore the coatings need to be biocompatible. In this study, we fabricated thin films made of biocompatible polyelectrolytes, positively charged polysaccharide chitosan, and negatively charged carboxymethyl cellulose on a model silica surface. Typically, to enhance the properties of the prepared nanofilms, the first layer (precursor layer) of poly(ethyleneimine) is used. However, for the construction of completely biocompatible coatings, this could be problematic due to potential toxicity. This study offers an option for a viable candidate as a replacement precursor layer: chitosan itself was adsorbed from a more concentrated solution. In the case of chitosan/carboxymethyl cellulose films, using chitosan over poly(ethyleneimine) as a precursor layer has shown a twofold increase in film thickness, as well as an increase in film roughness. In addition, these properties can be tuned by the presence of a biocompatible background salt (e.g., sodium chloride) in the deposition solution that has proven to change the film thickness and surface roughness depending on the salt concentration. Such a straightforward way of tuning the properties of these films combined with their biocompatibility makes this precursor material a prime candidate for use as a potential food coating.

Advanced applications of strontium-containing biomaterials in bone tissue engineering

Strontium (Sr) and strontium ranelate (SR) are commonly used therapeutic drugs for patients suffering from osteoporosis. Researches have showed that Sr can significantly improve the biological activity and physicochemical properties of materials in vitro and in vivo. Therefore, a large number of strontium containing biomaterials have been developed for repairing bone defects and promoting osseointegration. In this review, we provide a comprehensive overview of Sr-containing biomaterials along with the current state of their clinical use. For this purpose, the different types of biomaterials including calcium phosphate, bioactive glass, and polymers are discussed and provided future outlook on the fabrication of the next-generation multifunctional and smart biomaterials.

Formulation and evaluation of a novel herbal trio gel containing flax seed extract, carbopol and carboxymethyl cellulose

It is of interest to formulate and evaluate herbal trio gel containing brown flax seed extract, carbopol, and carboxymethyl cellulose and to assess the antimicrobial, anti-inflammatory activity along with quality analysis using SEM and FTIR. The brown flax seeds were grinded into a fine powder and supercritical fluid was prepared which was mixed with CMC and carbopol. The formulation was checked for antimicrobial, anti-inflammatory activity, surface characteristics with SEM and FTIR. The results revealed that the activity of the trio gel was efficacious in hampering the growth of black pigmented anaerobes. The highest zone of inhibition for novel herbal trio gel was recorded at 100 µL measuring 14mm and for the standard chlorhexidine gel it was recorded at 100 µL measuring 23mm in diameter. The results proved that the zone of inhibition of novel herbal trio gel had a decent difference to that of standard chlorhexidine gel. The anti-inflammatory activity showed significant activity at 20 µL which accounted for 53% for the novel herbal trio gel and for the standard diclofenac gel it showed highest activity at 20 µL which accounted for 60%. However, there was not much difference between the herbal trio gel and standard diclofenac gel. SEM observations revealed that the components used in formulation of this trio gel have been bonded well to each other and exhibited appreciable surface characteristics. The lattice of the trio gel has been very well exhibited in SEM analysis. FTIR revealed high peaks showing the different components present in the trio gel. Within the limitations of the study, the results of our study concluded that novel herbal trio gel containing Linum usitatissimum extract, sorbitol, and carboxymethyl cellulose could be an efficient economic primeval substitute that is non-toxic, natural, and structured for clinical application.

Production of single-component cellulose-based hydrogel and its utilization as adsorbent for aqueous contaminants

The growing concern for the environment has resulted in renewed interest in bio-based resources. This study aims to produce a hydrogel adsorbent from cellulose and examine its adsorption performance. In pursuit of this goal, we report a simple one-pot synthesis of cellulose acetate sulfate (CAS), followed by the formation of CAS hydrogels and their subsequent adsorption performances. The CAS includes both hydrophilic and hydrophobic functional groups, enable the formation of a single-component hydrogel through intermolecular interactions in deionized water. The thermal reversibility of CAS hydrogels makes them easily processable into various shapes. The durability of the CAS hydrogel adsorbents can be improved by introducing divalent cations (e.g., Ca²⁺), which create ionically crosslinked hydrogels. The ionically a crosslinked CAS hydrogel adsorbent exhibits a maximum adsorption capacity of 245 mg/g for methylene blue (MB) at 23 °C and a pH of 7. The adsorption behavior of MB on the CAS hydrogel follows both the pseudo-second-order model and the Langmuir adsorption isotherm model. Furthermore, the CAS hydrogel adsorbent maintains a 70 % removal ratio after five cycles. The simplicity of synthesis and hydrogel formation opens up new possibilities for producing and utilizing cellulose-based hydrogels as adsorbents for aqueous contaminants.

Decoration of sodium carboxymethylcellulose gel microspheres with modified lignin to enhanced methylene blue removal

The introduction of active groups from biomass is currently the most promising alternative method for increasing the adsorption effect of dyes. In this study, modified aminated lignin (MAL) rich in phenolic hydroxyl and amine groups was prepared by amination and catalytic grafting. The factors influencing the modification conditions of the content of amine and phenolic hydroxyl groups were explored. Chemical structural analysis results confirmed that MAL was successfully prepared using a two-step method. The content of phenolic hydroxyl groups in MAL significantly increased to 1.46 mmol/g. MAL/sodium carboxymethylcellulose (NaCMC) gel microspheres (MCGM) with enhanced methylene blue (MB) adsorption capacity owing to the formation of a composite with MAL were synthesized by a sol-gel process followed by freeze-drying and using multivalent cations Al³⁺ as cross-linking agents. In addition, the effects of the MAL to NaCMC mass ratio, time, concentration, and pH on the adsorption of MB were explored. Benefiting from a sufficient number of active sites, MCGM exhibited an ultrahigh adsorption capacity for MB removal, and the maximum adsorption capacity was 118.30 mg/g. These results demonstrated the potential of MCGM for wastewater treatment applications.

Carboxymethyl Cellulose as a Food Emulsifier: Are Its Days Numbered?

Carboxymethyl cellulose use in industry is ubiquitous. Though it is recognized as safe by the EFSA and FDA, newer works have raised concerns related to its safety, as in vivo studies showed evidence of gut dysbiosis associated with CMC's presence. Herein lies the question, is CMC a gut pro-inflammatory compound? As no work addressed this question, we sought to understand whether CMC was pro-inflammatory through the immunomodulation of GI tract epithelial cells. The results showed that while CMC was not cytotoxic up to 25 mg/mL towards Caco-2, HT29-MTX and Hep G2 cells, it had an overall pro-inflammatory behavior. In a Caco-2 monolayer, CMC by itself increased IL-6, IL-8 and TNF-α secretion, with the latter increasing by 1924%, and with these increases being 9.7 times superior to the one obtained for the IL-1β pro-inflammation control. In co-culture models, an increase in secretion in the apical side, particularly for IL-6 (692% increase), was observed, and when RAW 264.7 was added, data showed a more complex scenario as stimulation of pro-inflammatory (IL-6, MCP-1 and TNF-α) and anti-inflammatory (IL-10 and IFN-β) cytokines in the basal side was observed. Considering these results, CMC may exert a pro-inflammatory effect in the intestinal lumen, and despite more studies being required, the incorporation of CMC in foodstuffs must be carefully considered in the future to minimize potential GI tract dysbiosis.

Removal of fluoride ions from water by cerium-carboxymethyl cellulose beads doped with CeO2 nanoparticles

A novel adsorbent for fluoride ions (F^-) removal was prepared from cerium ion cross-linked carboxymethyl cellulose (CMC) biopolymer beads loaded with CeO₂ nanoparticles (NPs). The characterization of the beads was performed by swelling experiments, scanning electron microscopy and Fourier transforms infrared spectroscopy. The adsorption of fluoride ions from aqueous solutions was carried out with both cerium ion cross-linked CMC beads (CMCCe) and CeO₂-NPs added beads (CeO₂-CMC-Ce) in a batch system. Optimized adsorption conditions were obtained by testing the parameters such as pH, contact time, adsorbent dose, and shaking rate at 25 °C. The adsorption process is well described by the Langmuir isotherm and pseudo-second-order kinetics. The maximum adsorption capacity was found as 105 and 312 mg/g F^- for CMC-Ce and CeO₂-CMC-Ce beads, respectively. Reusability studies showed that, the adsorbent beads have exhibited excellent sustainable properties up to 9 cycle usage. This study suggests that, CMC-Ce composite with CeO₂ nanoparticles is a very effective adsorbent in removing fluoride from water.

Uncovering the Binder Interactions with S-PAN and MXene for Room Temperature Na-S Batteries

MXenes and sulfurized polyacrylonitrile (S-PAN) are emerging as possible contenders to resolve the polysulfide dissolution and volumetric expansion issues in sodium-sulfur batteries. Herein, we explore the interactions between Ti₃C₂T_x MXenes and S-PAN with traditional binders such as polyvinylidene difluoride (PVDF), poly(acrylic acid) (PAA), and carboxymethyl cellulose (CMC) in Na-S batteries for the first time. We hypothesize that the linearity and polarity of the binder significantly influence the dispersion of S-PAN over Ti₃C₂T_x. The three-dimensional polar CMC binder resulted in better contact surface area with both S-PAN and Ti₃C₂T_x. Moreover, the improved binding of the discharge products with the CMC binder effectively traps them and prevents unwanted shuttling. Consequently, the Na-S battery using the CMC binder displayed a high initial capacity of 1282 mAh/g_(s) at 0.2 C and a low capacity fading of 0.092% per cycle over 300 cycles. This work highlights the importance of understanding MXene-binder interactions in sulfur cathodes.

Carboxymethyl cellulose/poloxamer gels enriched with essential oil and Ag nanoparticles: promising wound dressings

Aim: Essential oils are promising antibacterial and wound-healing agents that should be explored for the design of wound dressings. Materials & methods: Topical gels prepared from a combination of carboxymethyl cellulose and poloxamer were incorporated with tea tree and lavender oil together with Ag nanoparticles. In vitro release, cytotoxicity, antibacterial, and wound healing studies were performed. Results: The gels displayed good spreadability with viscosity in the range of 210-1200 cP. The gels displayed promising antibacterial activity against selected Gram-positive and Gram-negative bacteria used in the study. The % cell viability of the gels was more than 90.83%. Conclusion: The topical gels displayed excellent wound closure in vitro revealing that they are potential wound dressings for bacteria-infected wounds.

Eco-Friendly Semi-Interpenetrating Polymer Network Hydrogels of Sodium Carboxymethyl Cellulose/Gelatin for Methylene Blue Removal

The present work describes the potential application of environmentally friendly sodium carboxymethylcellulose/gelatin (CMC/Gel) semi-interpenetrating hydrogels prepared by citric acid as a nontoxic cross-linking agent to adsorb dyes. The prepared hydrogels were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA/DTG), and swelling study. The adsorption performance of CMC/Gel2 (C/G2) hydrogel on methylene blue (MB) was investigated. The results showed the better adsorption conditions: adsorption time of 300 min, initial MB concentration of 500 mg/L, adsorbent dosage of 1.2 g/L, solution pH of 7, and temperature of 30 °C. The adsorption kinetics fit the pseudo-second order kinetics model, and the adsorption isotherm fit the Langmuir isotherm model. The maximum adsorption capacity reached 943.40 mg/g. The adsorption process is a spontaneous exothermic process. After three adsorption-desorption cycles, the removal rate of MB by hydrogel still reached 85%, with good reusability. Consequently, the hydrogel can be used as an environmentally friendly, stable, and efficient adsorbent for dyes in wastewater treatment.

Magnetic Ionotropic Hydrogels Based on Carboxymethyl Cellulose for Aqueous Pollution Mitigation

In this work, stabilized ionotropic hydrogels were designed using sodium carboxymethyl cellulose (CMC) and assessed as inexpensive sorbents for hazardous chemicals (e.g., Methylene Blue, MB) from contaminated wastewaters. In order to increase the adsorption capacity of the hydrogelated matrix and facilitate its magnetic separation from aqueous solutions, sodium dodecyl sulfate (SDS) and manganese ferrite (MnFe₂O₄) were introduced into the polymer framework. The morphological, structural, elemental, and magnetic properties of the adsorbents (in the form of beads) were assessed using scanning electron microscopy (SEM), energy-dispersive X-ray analysis, Fourier-transform infrared spectroscopy (FTIR), and a vibrating-sample magnetometer (VSM). The magnetic beads with the best adsorption performance were subjected to kinetic and isotherm studies. The PFO model best describes the adsorption kinetics. A homogeneous monolayer adsorption system was predicted by the Langmuir isotherm model, registering a maximum adsorption capacity of 234 mg/g at 300 K. The calculated thermodynamic parameter values indicated that the investigated adsorption processes were both spontaneous (ΔG < 0) and exothermic (ΔH < 0). The used sorbent can be recovered after immersion in acetone (93% desorption efficiency) and re-used for MB adsorption. In addition, the molecular docking simulations disclosed aspects of the mechanism of intermolecular interaction between CMC and MB by detailing the contributions of the van der Waals (physical) and Coulomb (electrostatic) forces.

Interactions between Ionic Cellulose Derivatives Recycled from Textile Wastes and Surfactants: Interfacial, Aggregation and Wettability Studies

Interactions between polymers (P) and surfactants (S) in aqueous solution lead to interfacial and aggregation phenomena that are not only of great interest in physical chemistry but also important for many industrial applications, such as the development of detergents and fabric softeners. Here, we synthesized two ionic derivatives-sodium carboxymethylcellulose (NaCMC) and quaternized cellulose (QC)-from cellulose recycled from textile wastes and then explored the interactions of these polymers with assorted surfactants-cationic (CTAB, gemini), anionic (SDS, SDBS) and nonionic (TX-100)-commonly used in the textile industry. We obtained surface tension curves of the P/S mixtures by fixing the polymer concentration and then increasing the surfactant concentration. In mixtures where polymer and surfactant are oppositely charged (P^-/S⁺ and P⁺/S^-), a strong association is observed, and from the surface tension curves, we determined the critical aggregation concentration (cac) and critical micelle concentration in the presence of polymer (cmc^p). For mixtures of similar charge (P⁺/S⁺ and P^-/S^-), virtually no interactions are observed, with the notable exception of the QC/CTAB system, which is much more surface active than the neat CTAB. We further investigated the effect of oppositely charged P/S mixtures on hydrophilicity by measuring the contact angles of aqueous droplets on a hydrophobic textile substrate. Significantly, both P^-/S⁺ and P⁺/S^- systems greatly enhance the hydrophilicity of the substrate at much lower surfactant concentrations than the surfactant alone (in particular in the QC/SDBS and QC/SDS systems).