Synthesis of highly crystalline and monodisperse maghemite nanocrystallites without a size-selection process

Use of the liquid–liquid interface for generating ultrathin nanocrystalline films of metals, chalcogenides, and oxides

The air-water interface has traditionally been employed to prepare particle assemblies and films of metals and semiconductors. The interface between water and an organic liquid, however, has not been investigated sufficiently for possible use in preparing nanocrystals and thin films of materials. In this article, we demonstrate the use of the liquid-liquid interface as a medium for preparing ultrathin films of metals, chalcogenides and oxides. The method involves the reaction at the interface between a metal-organic compound in the organic layer and an appropriate reagent for reduction, sulfidation, etc. in the aqueous layer. Some of the materials discussed are nanocrystalline films of gold, CuS, CuSe, CuO, and Cu(OH)2 formed at the liquid-liquid interface. The results reported in this article should demonstrate the versatility and potential of the liquid-liquid interface for preparing nanomaterials and ultrathin films and encourage further research in this area.

Surface modification of magnetic nanoparticles capped by oleic acids: characterization and colloidal stability in polar solvents

The lyophobic surface of monodisperse magnetic nanoparticles capped by oleic acid was made to be more lyophilic by ozonolysis to increase the stability of the suspension in polar solvents like ethanol. The ozone oxidatively cleaved the double bond of oleic acid to form carbonyl and carboxyl groups on the surface of the nanoparticles. Additionally, interfacial ligand exchange of the capping molecules was applied to make the hydrophobic particle surface more hydrophilic. The magnetic particles showed enhanced miscibility and short-term stability in water after interfacial ligand exchange. The structure changes of the capping molecules on the nanoparticle surfaces were investigated using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). From these spectroscopy studies, the cleavage of the oleic acid and the formations of the carboxyl and carbonyl groups on the particle surface were confirmed. The shape and the magnetic properties of the nanoparticles were maintained after the surface modification. Ozonolysis is an effective method in modifying the lyophobic surface of the magnetic nanoparticles.

Synthesis and self-assembled ring structures of Ni nanocrystals

Narrow size distribution Ni nanocrystals with average diameters from 5 to 13 nm ( approximately 20% standard deviation) and a face-centered cubic (fcc) structure were synthesized via rapid thermo-decomposition in the presence of surfactants in solution. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used to characterize these nanocrystals. It was found that the solvent determined the rate of the decomposition of Ni precursors, while the surfactants controlled the size and shape of Ni nanocrystals. A three-step process was proposed to explain the synthesis. The purified Ni nanocrystals readily formed micrometer-sized ring structures on TEM grids after solvent evaporation (hexanes), and the magnetic field was found to increase the density of the rings.

Tunable magnetic arrangement of iron oxide nanoparticles in situ synthesized on the solid substrate from diblock copolymer micelles

Hexagonal arrangement of iron oxide nanoparticles was fabricated by utilizing a single-layered film of diblock copolymer micelles. The synthesis was directly performed on the solid substrate by oxygen plasma with preserving the dimensional order of micelles so that separate procedures for synthesis and deposition of nanoparticles were not necessary. Since the oxygen plasma treatment also eliminated polymers, pure patterns of iron oxide nanoparticles were obtained. Moreover, easy control over the size of nanoparticles enabled us to selectively create a ferrimagnetic or a superparamagnetic pattern of iron oxide nanoparticles without altering the fabrication process.

Synthesis of magnetic nanocomposites and alloys from platinum-iron oxide core-shell nanoparticles

This paper presents a systematic study on the generation of iron platinum-containing magnetic nanocomposites and alloys from Pt@Fe(2)O(3) core-shell nanoparticle precursors. These core-shell nanoparticles were made using a sequential synthetic approach. They could form FePt alloys and alloy-containing nanocomposites through a solid-state reaction at >400 °C. The chemical compositions of FePt alloys were controllable by using Pt@Fe(2)O(3) core-shell nanoparticles that had the designed Pt core diameter and iron oxide shell thickness. We show that face-centred tetragonal (fct) FePt@Fe core-shell nanoparticles could be made from Pt@Fe(2)O(3) core-shell nanoparticles with 5% hydrogen in argon (v/v). Furthermore, various FePt alloys and alloy-containing nanocomposites including metastable intermediate phases could be obtained. The materials were characterized by high resolution scanning transmission electron microscopy (HR-STEM), energy dispersive x-ray (EDX) spectroscopy, powder x-ray diffraction (PXRD), parallel electron energy loss spectroscopy (PEELS), and superconducting quantum interference device (SQUID) magnetometry. These materials could have potential applications as permanent hard magnets and data storage media.

Carbon nanotube Schottky diodes using Ti-Schottky and Pt-Ohmic contacts for high frequency applications

We have demonstrated Schottky diodes using semiconducting single-walled nanotubes (s-SWNTs) with titanium Schottky and platinum Ohmic contacts for high-frequency applications. The diodes are fabricated using angled evaporation of dissimilar metal contacts over an s-SWNT. The devices demonstrate rectifying behavior with large reverse bias breakdown voltages of greater than -15 V. To decrease the series resistance, multiple SWNTs are grown in parallel in a single device, and the metallic tubes are burnt-out selectively. At low biases these diodes showed ideality factors in the range of 1.5 to 1.9. Modeling of these diodes as direct detectors at room temperature at 2.5 terahertz (THz) frequency indicates noise equivalent powers (NEP) potentially comparable to that of the state-of-the-art gallium arsenide solid-state Schottky diodes, in the range of 10(-13) W/ radical Hz.

Capillary Magnetic Field Flow Fractionation and Analysis of Magnetic Nanoparticles

This paper reports the purification and analysis of magnetic nanoparticles using capillary magnetic field flow fractionation, which utilizes an applied magnetic field oriented orthogonal to the capillary flow. To validate this approach as a separation method for nanometer-scale particles, samples of magnetic nanoparticles composed of either gamma-Fe2O3 (maghemite) or CoFe2O4 with average diameters ranging from 4 to 13 nm were prepared and characterized by transmission electron microscopy and SQUID magnetometry. Retention of the samples on the capillary was investigated as a function of solvent flow rate and the nanoparticle size and composition; the elution times of the nanoparticles are strongly dependent on their magnetic moments. We demonstrate the use of this method to separate a mixture of nanoparticles into size-monodisperse fractions. The magnetic moments of the particles are calculated based on analysis of the retention parameters and correlate with values obtained in separate SQUID magnetometry measurements.

Super-Stable, High-Quality Fe3 O4 Dendron-Nanocrystals Dispersible in Both Organic and Aqueous Solutions

High-quality Fe₃ O₄ nanocrystals coated with stearate groups are successfully converted to dendron-coated nanocrystals (dendron-nanocrystals). Poly(ethylene glycol) oligomers are used as major terminal groups for the dendron ligands, which afford excellent dispersibility of the dendron-nanocrystals in a broad spectrum of solvents, ranging from dichloromethane to water.

Polymorphism in AB13 Nanoparticle Superlattices: An Example of Semiconductor−Metal Metamaterials

Colloidal crystallization of nanoparticles with different functionalities into multicomponent assemblies provides a route to new classes of ordered nanocomposites with novel properties tunable by the choice of the constituent building blocks. While theories based on hard sphere approximation predict crystallization of only a few stable binary phases (NaCl-, AlB(2)- and NaZn(13)-type), we find that additional polymorphs of lower packing density are possible. We demonstrate that PbSe and Pd nanoparticles can be reproducibly crystallized into two polymorphs with AB(13) stoichiometry. One polymorph is isostructural with the intermetallic compound NaZn(13) and is consistent with dense packing of hard spheres driven by entropy. The second unanticipated polymorph is of lower packing density. This observation underscores the shortcomings of applying simple space-filling principles to the crystallization of organically passivated nanocrystals and further motivates the development of models that incorporate combinations of hard-sphere, van der Waals, dipolar, and hydrophobic forces. This work demonstrates that ordered periodic structures with lower packing density are achievable and provides the first example of a binary semiconductor-metal superlattice using a combination of PbSe-Pd nanocrystals.

Silica-coated nanocomposites of magnetic nanoparticles and quantum dots

Quantum dots (QDs) and magnetic nanoparticles (MPs) are of interest for biological imaging, drug targeting, and bioconjugation because of their unique optoelectronic and magnetic properties, respectively. To provide for water solubility and biocompatibility, QDs and MPs were encapsulated within a silica shell using a reverse microemulsion synthesis. The resulting SiO2/MP-QD nanocomposite particles present a unique combination of magnetic and optical properties. Their nonporous silica shell allows them to be surface modified for bioconjugation in various biomedical applications.

Superparamagnetic Nanoparticle-Supported Catalysis of Suzuki Cross-Coupling Reactions

Emulsion polymerization was examined as a novel route for the synthesis of core/shell superparamagnetic nanoparticles consisting of a highly crystalline gamma-Fe2O3 core and a very thin polymeric shell wall. These nanoparticles were used as soluble supports for immobilizing Pd catalysts to promote Suzuki cross-coupling reactions. Recovery of catalysts was facilely achieved by applying a permanent magnet externally. Isolated catalysts were reused for new rounds of reactions without significant loss of their catalytic activity.

A Kinetic Model to Describe Nanocrystal Growth by the Oriented Attachment Mechanism

The classical model of particle coagulation on colloids is revisited to evaluate its applicability on the oriented attachment of nanoparticles. The proposed model describes well the growth behavior of dispersed nanoparticles during the initial stages of nanoparticle synthesis and during growth induced by hydrothermal treatments. Moreover, a general model, which combines coarsening (i.e., Ostwald ripening) and oriented attachment effects, is proposed as an alternative to explain deviations between experimental results and existing theoretical models.

Phosphine Oxide Polymer for Water-Soluble Nanoparticles

A phosphine oxide polymer was developed using bis(dichlorophosphino)ethane and poly(ethylene glycol). This polymer system was used to transfer various nanoparticles from organic solvents to water, retaining their physical properties and reactivities.

A General Nonaqueous Route to Binary Metal Oxide Nanocrystals Involving a C−C Bond Cleavage

A widely applicable solvothermal route to nanocrystalline iron, indium, gallium, and zinc oxide based on the reaction between the corresponding metal acetylacetonate as metal oxide precursor and benzylamine as solvent and reactant is presented. Detailed XRD, TEM, and Raman studies prove that, with the exception of the iron oxide system, where a mixture of the two phases magnetite and maghemite is formed, only phase pure materials are obtained, gamma-Ga(2)O(3), zincite ZnO, and cubic In(2)O(3). The particle sizes lie in the range of 15-20 nm for the iron, 10-15 nm for the indium, 2.5-3.5 nm for gallium, and around 20 nm for zinc oxide. GC-MS analysis of the final reaction solution after removal of the nanoparticles showed that the composition is rather complex consisting of more than eight different organic compounds. Based on the fact that N-isopropylidenebenzylamine, 4-benzylamino-3-penten-2-one, and N-benzylacetamide were the main species found, we propose a detailed formation mechanism encompassing solvolysis of the acetylacetonate ligand, involving C-C bond cleavage, as well as ketimine and aldol-like condensation steps.

Synthesis of Quantum-Sized Cubic ZnS Nanorods by the Oriented Attachment Mechanism

Quantum-sized ZnS nanocrystals with quasi-spherical and rod shapes were synthesized by the aging reaction mixtures containing diethylzinc, sulfur, and amine. Uniform-sized ZnS nanorods with the average dimension of 5 nm x 21 nm, along with a small fraction of 5 nm-sized quasi-spherical nanocrystals, were synthesized by adding diethylzinc to a solution containing sulfur and hexadecylamine at 125 degrees C, followed by aging at 300 degrees C. Subsequent secondary aging of the nanocrystals in oleylamine at 60 degrees C for 24 h produced nearly pure nanorods. Structural characterizations showed that these nanorods had a cubic zinc blende structure, whereas the fabrication of nanorods with this structure has been known to be difficult to achieve via colloidal chemical synthetic routes. High-resolution TEM images and reaction studies demonstrated that these nanorods are formed from the oriented attachment of quasi-spherical nanocrystals. Monodisperse 5 nm-sized quasi-spherical ZnS nanocrystals were separately synthesized by adding diethylzinc to sulfur dissolved in a mixture of hexadecylamine and 1-octadecene at 45 degrees C, followed by aging at 300 degrees C. When oleic acid was substituted for hexadecylamine and all other procedures were unchanged, we obtained 10 nm-sized quasi-spherical ZnS nanocrystals, but with broad particle size distribution. These two different-sized quasi-spherical ZnS nanocrystals showed different proportions of zinc blende and wurtzite crystal structures. The UV absorption spectra and photoluminescence excitation spectra of the 5 nm ZnS quasi-spherical nanocrystals and of the nanorods showed a blue-shift from the bulk band-gap, thus showing a quantum confinement effect. The photoluminescence spectra of the ZnS nanorods and quasi-spherical nanocrystals showed a well-defined excitonic emission feature and size- and shape-dependent quantum confinement effects.

In Situ One-Pot Synthesis of 1-Dimensional Transition Metal Oxide Nanocrystals

One-dimensional colloidal metal oxide nanocrystals are of great importance in materials chemistry, but reports on these materials are rare due to lack of well-defined synthetic protocols. In this paper, we present a general and highly effective one-pot synthetic protocol to produce 1-dimensional nanostructures of transition metal oxide (e.g., W(18)O(49), TiO(2), Mn(3)O(4), and V(2)O(5)) through thermally induced crystal growth processes from a mixture of metal chloride and surfactants.

An organometallic synthesis of TiO2 nanoparticles

We report the synthesis of TiO2 nanoparticles that uses the low-temperature reaction of low-valent organometallic precursors. Bis(cyclooctatetraene)titanium reacts with dimethyl sulfoxide in organic solution at temperatures as low as room temperature to produce TiO2. In the absence of any supporting ligand, the reaction gives precipitation of amorphous TiO2 powder; however, in the presence of basic ligands such as tributylphosphine, tributylphosphine oxide and trioctylphosphine oxide, the precipitation is arrested, and chemically distinct, isolated, internally crystalline TiO2 nanoparticles are formed.

Inorganic Nanocrystal Self-Assembly via the Inclusion Interaction of β-Cyclodextrins: Toward 3D Spherical Magnetite

Synthesis and three-dimensional (3D) assembly of magnetite nanocrystals were realized by a one-pot procedure, in which Fe(acac)3 (acac = acetylacetonate) was partly reduced by hydrazine accompanied with ethylene glycol and spontaneously assembled into spherical nanostructures in the presence of surfactants including beta-cyclodextrin, oleic acid, and oleylamine. The size of the assembled spheres can coarsely be controlled in a limited range (100 nm to 2 microm) by changing the reaction temperature and the concentration of beta-cyclodextrin. X-ray diffraction and far Fourier transform infrared spectroscopy were employed to clarify the structures of magnetite in the assembled spheres. Electron diffraction pattern in a selected-area exhibits a high-crystallinity characteristic of cubic structure magnetite. We found that the formation of spherical magnetite aggregates highly depends on the presence of beta-cyclodextrin, while oleic acid and oleylamine improve the morphology of individual magnetite nanoparticles in the assembled spheres. In addition, the thermal gravimetric analysis and differential thermal analysis were applied to determine the content of magnetite in the products. Magnetic properties were also studied by using a superconducting quantum interference device magnetometer.

Colloidal Synthesis of Organic-Capped ZnO Nanocrystals via a Sequential Reduction−Oxidation Reaction

A nonhydrolytic route to quantum-sized (d < 9 nm) ZnO nanocrystals in homogeneous organic solutions is presented. Nearly spherical ZnO nanocrystals were grown in a surfactant mixture of hexadecylamine and oleic acid (OLEA) by means of a two-step chemical process, based on the hot reduction (at 180-250 degrees C) of a zinc halide by superhydride (LiBEt3H) followed by oxidation of the resulting product. The experimental results suggested that the controlled growth of ZnO in the nanosized regime depended both on the OLEA-assisted generation of intermediate metallic nanoparticles and on the adjustment of their oxidation conditions by using a mild oxidant, trimethylamine-N-oxide, rather than molecular oxygen. The present synthetic approach demonstrates to be particularly suitable to prepare organic-soluble ultra-small ZnO nanocrystals of low size dispersion and of stable size, which are appealing for optoelectronic, catalytic, and sensing purposes.

Recycling of homogeneous Pd catalysts using superparamagnetic nanoparticles as novel soluble supports for Suzuki, Heck, and Sonogashira cross-coupling reactions

Recycling of homogeneous catalysts could be achieved by using magnetic nanoparticles and solid-phase beads, but nanoparticle-supported catalysis proceeded much faster than its counterpart on resins.

Organometallic based strategies for metal nanocrystal synthesis

Organometallic strategies normally employed for the production of semiconductor quantum dots have been successfully applied to the synthesis of metal nanoparticles. By controlling parameters such as capping agents, reaction temperature and precursor chemistry, precise nanostructures can be obtained that exhibit highly desirable magnetic, optical and catalytic properties.

Porous polystyrene microspheres having dimpled surface structures prepared within micellar assemblies of amphiphilic silica particles in water

Production of porous polystyrene microspheres having dimpled surface structures was demonstrated using amphiphilic and hydrophobic silica particles as structure-directing agents.

Synthesis and cellular uptake of porphyrin decorated iron oxide nanoparticles—a potential candidate for bimodal anticancer therapy

This paper reports the synthesis, characterization, and cellular uptake of the conjugate of porphyrin and iron oxide nanoparticles, which may lead to a bimodal anticancer agent that can be used in the combinational treatment of photodynamic therapy (PDT) and hyperthermia therapy (HT).

Superparamagnetic nanoparticle-supported enzymatic resolution of racemic carboxylates

Candida rugosa lipase immobilized on maghemite nanoparticles demonstrated high stereoselectivity in kinetic resolution of racemic carboxylates and improved long-term stability over its parent free enzyme, allowing the supported enzyme to be repeatedly used for a series of chiral resolution reactions.

On the development of colloidal nanoparticles towards multifunctional structures and their possible use for biological applications

In this Review, we describe the synthesis of high-quality colloidal nanoparticles in organic solvents, the mechanisms by which they can be transferred into aqueous solution, and some of their applications in biology. In particular, we will place emphasis on the creation of multifunctional nanoparticles or nanoparticle assemblies.

Ultra-large-scale syntheses of monodisperse nanocrystals

The development of nanocrystals has been intensively pursued, not only for their fundamental scientific interest, but also for many technological applications. The synthesis of monodisperse nanocrystals (size variation <5%) is of key importance, because the properties of these nanocrystals depend strongly on their dimensions. For example, the colour sharpness of semiconductor nanocrystal-based optical devices is strongly dependent on the uniformity of the nanocrystals, and monodisperse magnetic nanocrystals are critical for the next-generation multi-terabit magnetic storage media. For these monodisperse nanocrystals to be used, an economical mass-production method needs to be developed. Unfortunately, however, in most syntheses reported so far, only sub-gram quantities of monodisperse nanocrystals were produced. Uniform-sized nanocrystals of CdSe (refs 10,11) and Au (refs 12,13) have been produced using colloidal chemical synthetic procedures. In addition, monodisperse magnetic nanocrystals such as Fe (refs 14,15), Co (refs 16-18), gamma-Fe(2)O(3) (refs 19,20), and Fe(3)O(4) (refs 21,22) have been synthesized by using various synthetic methods. Here, we report on the ultra-large-scale synthesis of monodisperse nanocrystals using inexpensive and non-toxic metal salts as reactants. We were able to synthesize as much as 40 g of monodisperse nanocrystals in a single reaction, without a size-sorting process. Moreover, the particle size could be controlled simply by varying the experimental conditions. The current synthetic procedure is very general and nanocrystals of many transition metal oxides were successfully synthesized using a very similar procedure.

Magnetic, Electronic, and Structural Characterization of Nonstoichiometric Iron Oxides at the Nanoscale

We have investigated the structural, magnetic, and electronic properties of nonstoichiometric iron oxide nanocrystals prepared by decomposition of iron(II) and iron(0) precursors in the presence of organic solvents and capping groups. The highly uniform, crystalline, and monodisperse nanocrystals that were produced enabled a full structural and compositional survey by electron microscopy and X-ray diffraction. The complex and metastable behavior of nonstoichiometric iron oxide (wüstite) at the nanoscale was studied by a combination of Mossbauer spectroscopy and magnetic characterization. Deposition from hydrocarbon solvents with subsequent self-assembly of iron oxide nanocrystals into superlattices allowed the preparation of continuous thin films suitable for electronic transport measurements.

Liquid foam as a template for the synthesis of iron oxyhydroxide nanoparticles

Liquid foams have been used as a template to prepare iron oxyhydroxide nanoparticles. This is achieved by a process of electrostatic entrapment of Fe2+/Fe3+ ions in the foam stabilized by the surfactant sodium dodecyl sulfate followed by the in situ hydrolysis of the metal ions. Infrared and selected area electron diffraction measurements suggest the formation of a mixture of beta-FeO(OH) and gamma-FeO(OH) crystallographic phases after the in situ hydrolysis of the metal ions in the foam template. Transmission electron microscopy analysis of the powders obtained from the foam indicates that the particles are fairly monodisperse with an average size of around 50 nm. Scanning electron microscopy pictures reveal that the particles form loosely bound aggregates of around 300 nm. After the powders obtained in the foam are annealed at 400 degrees C, X-ray diffraction measurements show that the FeO(OH) particles are converted to alpha-Fe2O3. The mechanistic aspects of metal ion hydrolysis in a foam are discussed, and some of the advantages of this method vis-à-vis the normal solution-based methods are outlined.

Glucose oxidase?magnetite nanoparticle bioconjugate for glucose sensing

Immobilization of bioactive molecules on the surface of magnetic nanoparticles is of great interest, because the magnetic properties of these bioconjugates promise to greatly improve the delivery and recovery of biomolecules in biomedical applications. Here we present the preparation and functionalization of magnetite (Fe3O4) nanoparticles 20 nm in diameter and the successful covalent conjugation of the enzyme glucose oxidase to the amino-modified nanoparticle surface. Functionalization of the magnetic nanoparticle surface with amino groups greatly increased the amount and activity of the immobilized enzyme compared with immobilization procedures involving physical adsorption. The enzymatic activity of the glucose oxidase-coated magnetic nanoparticles was investigated by monitoring oxygen consumption during the enzymatic oxidation of glucose using a ruthenium phenanthroline fluorescent complex for oxygen sensing. The glucose oxidase-coated magnetite nanoparticles could function as nanometric glucose sensors in glucose solutions of concentrations up to 20 mmol L(-1). Immobilization of glucose oxidase on the nanoparticles also increased the stability of the enzyme. When stored at 4 degrees C the nanoparticle suspensions maintained their bioactivity for up to 3 months.