Non-fermentative pathways for synthesis of branched-chain higher alcohols as biofuels

Engineering Corynebacterium glutamicum for isobutanol production

The production of isobutanol in microorganisms has recently been achieved by harnessing the highly active 2-keto acid pathways. Since these 2-keto acids are precursors of amino acids, we aimed to construct an isobutanol production platform in Corynebacterium glutamicum, a well-known amino-acid-producing microorganism. Analysis of this host’s sensitivity to isobutanol toxicity revealed that C. glutamicum shows an increased tolerance to isobutanol relative to Escherichia coli. Overexpression of alsS of Bacillus subtilis, ilvC and ilvD of C. glutamicum, kivd of Lactococcus lactis, and a native alcohol dehydrogenase, adhA, led to the production of 2.6 g/L isobutanol and 0.4 g/L 3-methyl-1-butanol in 48 h. In addition, other higher chain alcohols such as 1-propanol, 2-methyl-1-butanol, 1-butanol, and 2-phenylethanol were also detected as byproducts. Using longer-term batch cultures, isobutanol titers reached 4.0 g/L after 96 h with wild-type C. glutamicum as a host. Upon the inactivation of several genes to direct more carbon through the isobutanol pathway, we increased production by ∼25% to 4.9 g/L isobutanol in a ∆pyc∆ldh background. These results show promise in engineering C. glutamicum for higher chain alcohol production using the 2-keto acid pathways.

Production of 2,3-butanediol from corncob molasses, a waste by-product in xylitol production

Corncob molasses, a waste by-product in xylitol production, contains high concentrations of mixed sugars. In the present study, corncob molasses was used to produce 2,3-butanediol (BD) using Klebsiella pneumoniae SDM. This was the first report on the use of corncob molasses to produce bulk chemicals. Our results indicated that K. pneumoniae SDM can utilize various sugars contained in the corncob molasses in a preferential manner: glucose > arabinose > xylose. It was shown that high sugars concentration had an inhibitory effect on the cells growth and BD production. The maximum concentration of BD was 78.9 g/l after 61 h of fed-batch fermentation, giving a BD productivity of 1.3 g/l h and a yield of 81.4%. The present study suggests that the low-cost corncob molasses could be used as an alternative substrate for the production of BD by K. pneumoniae SDM, as well as a potential carbon source for production of other high-value chemicals.

Metabolic engineering for production of biorenewable fuels and chemicals: contributions of synthetic biology

Production of fuels and chemicals through microbial fermentation of plant material is a desirable alternative to petrochemical-based production. Fermentative production of biorenewable fuels and chemicals requires the engineering of biocatalysts that can quickly and efficiently convert sugars to target products at a cost that is competitive with existing petrochemical-based processes. It is also important that biocatalysts be robust to extreme fermentation conditions, biomass-derived inhibitors, and their target products. Traditional metabolic engineering has made great advances in this area, but synthetic biology has contributed and will continue to contribute to this field, particularly with next-generation biofuels. This work reviews the use of metabolic engineering and synthetic biology in biocatalyst engineering for biorenewable fuels and chemicals production, such as ethanol, butanol, acetate, lactate, succinate, alanine, and xylitol. We also examine the existing challenges in this area and discuss strategies for improving biocatalyst tolerance to chemical inhibitors.

3-Methyl-1-butanol production in Escherichia coli: random mutagenesis and two-phase fermentation

Interest in producing biofuels from renewable sources has escalated due to energy and environmental concerns. Recently, the production of higher chain alcohols from 2-keto acid pathways has shown significant progress. In this paper, we demonstrate a mutagenesis approach in developing a strain of Escherichia coli for the production of 3-methyl-1-butanol by leveraging selective pressure toward L-leucine biosynthesis and screening for increased alcohol production. Random mutagenesis and selection with 4-aza-D,L-leucine, a structural analogue to L-leucine, resulted in the development of a new strain of E. coli able to produce 4.4 g/L of 3-methyl-1-butanol. Investigation of the host's sensitivity to 3-methyl-1-butanol directed development of a two-phase fermentation process in which titers reached 9.5 g/L of 3-methyl-1-butanol with a yield of 0.11 g/g glucose after 60 h.

Comparing the effects of various fuel alcohols on the natural attenuation of benzene plumes using a general substrate interaction model

The effects of five fuel alcohols (methanol, ethanol, 1-propanol, iso-butanol and n-butanol) on the natural attenuation of benzene were compared using a previously developed numerical model (General Substrate Interaction Module--GSIM) and a probabilistic sensitivity analysis. Simulations with a 30 gal dissolving LNAPL (light non-aqueous phase liquid) source consisting of a range of gasoline blends (10% and 85% v:v alcohol content) suggest that all fuel alcohols can hinder the natural attenuation of benzene, due mainly to accelerated depletion of dissolved oxygen and a decrease in the specific degradation rate for benzene (due to catabolite repression and metabolic flux dilution). Simulations for blends with 10% alcohol, assuming a homogeneous sandy aquifer, inferred maximum benzene plume elongations (relative to a regular gasoline release) of 26% for ethanol, 47% for iso-butanol, 147% for methanol, 188% for 1-propanol, and 265% for n-butanol. The corresponding elongation percentages for blends with 85% alcohol were generally smaller (i.e., 25%, 54%, 135%, 163%, and 181%, respectively), reflecting a lower content of benzene in the simulated release. Benzene plume elongation and longevity were more pronounced in the presence of alcohols that biodegrade slower (e.g., propanol and n-butanol), forming longer and more persistent alcohol plumes. Conversely, ethanol and iso-butanol exhibited the lowest potential to hinder the natural attenuation of benzene, illustrating the significant effect that a small difference in chemical structure (e.g., isomers) can have on biodegradation. Overall, simulations were highly sensitive to site-specific biokinetic coefficients for alcohol degradation, which forewarns against generalizations about the level of impact of specific fuel alcohols on benzene plume dynamics.

Genetic engineering of algae for enhanced biofuel production

There are currently intensive global research efforts aimed at increasing and modifying the accumulation of lipids, alcohols, hydrocarbons, polysaccharides, and other energy storage compounds in photosynthetic organisms, yeast, and bacteria through genetic engineering. Many improvements have been realized, including increased lipid and carbohydrate production, improved H(2) yields, and the diversion of central metabolic intermediates into fungible biofuels. Photosynthetic microorganisms are attracting considerable interest within these efforts due to their relatively high photosynthetic conversion efficiencies, diverse metabolic capabilities, superior growth rates, and ability to store or secrete energy-rich hydrocarbons. Relative to cyanobacteria, eukaryotic microalgae possess several unique metabolic attributes of relevance to biofuel production, including the accumulation of significant quantities of triacylglycerol; the synthesis of storage starch (amylopectin and amylose), which is similar to that found in higher plants; and the ability to efficiently couple photosynthetic electron transport to H(2) production. Although the application of genetic engineering to improve energy production phenotypes in eukaryotic microalgae is in its infancy, significant advances in the development of genetic manipulation tools have recently been achieved with microalgal model systems and are being used to manipulate central carbon metabolism in these organisms. It is likely that many of these advances can be extended to industrially relevant organisms. This review is focused on potential avenues of genetic engineering that may be undertaken in order to improve microalgae as a biofuel platform for the production of biohydrogen, starch-derived alcohols, diesel fuel surrogates, and/or alkanes.

Prediction of novel synthetic pathways for the production of desired chemicals

BACKGROUND

There have been several methods developed for the prediction of synthetic metabolic pathways leading to the production of desired chemicals. In these approaches, novel pathways were predicted based on chemical structure changes, enzymatic information, and/or reaction mechanisms, but the approaches generating a huge number of predicted results are difficult to be applied to real experiments. Also, some of these methods focus on specific pathways, and thus are limited to expansion to the whole metabolism.

RESULTS

In the present study, we propose a system framework employing a retrosynthesis model with a prioritization scoring algorithm. This new strategy allows deducing the novel promising pathways for the synthesis of a desired chemical together with information on enzymes involved based on structural changes and reaction mechanisms present in the system database. The prioritization scoring algorithm employing Tanimoto coefficient and group contribution method allows examination of structurally qualified pathways to recognize which pathway is more appropriate. In addition, new concepts of binding site covalence, estimation of pathway distance and organism specificity were taken into account to identify the best synthetic pathway. Parameters of these factors can be evolutionarily optimized when a newly proven synthetic pathway is registered. As the proofs of concept, the novel synthetic pathways for the production of isobutanol, 3-hydroxypropionate, and butyryl-CoA were predicted. The prediction shows a high reliability, in which experimentally verified synthetic pathways were listed within the top 0.089% of the identified pathway candidates.

CONCLUSIONS

It is expected that the system framework developed in this study would be useful for the in silico design of novel metabolic pathways to be employed for the efficient production of chemicals, fuels and materials.

Construction and optimization of synthetic pathways in metabolic engineering

Metabolic engineering has enabled us to develop strains suitable for their use as microbial factories of chemicals and materials from renewable sources. It has recently become more powerful with the advanced in synthetic biology, which is allowing us to create novel and fine-controlled metabolic and regulatory circuits maximizing metabolic fluxes to the desired products in the strain being developed. This enables us to engineer host microorganisms to enhance their innate metabolic capabilities or to gain new capabilities in the production of target compounds. Here we review recently constructed synthetic pathways that have been successfully applied for producing non-innate chemicals and also discuss recent approaches developed to increase the efficiency of synthetic pathways for achieving higher productivities of desired bioproducts.

Fermentative production of branched chain amino acids: a focus on metabolic engineering

The branched chain amino acids (BCAAs), L-valine, L-leucine, and L-isoleucine, have recently been attracting much attention as their potential to be applied in various fields, including animal feed additive, cosmetics, and pharmaceuticals, increased. Strategies for developing microbial strains efficiently producing BCAAs are now in transition toward systems metabolic engineering from random mutagenesis. The metabolism and regulatory circuits of BCAA biosynthesis need to be thoroughly understood for designing system-wide metabolic engineering strategies. Here we review the current knowledge on BCAAs including their biosynthetic pathways, regulations, and export and transport systems. Recent advances in the development of BCAA production strains are also reviewed with a particular focus on L-valine production strain. At the end, the general strategies for developing BCAA overproducers by systems metabolic engineering are suggested.

Fermentable sugars by chemical hydrolysis of biomass

Abundant plant biomass has the potential to become a sustainable source of fuels and chemicals. Realizing this potential requires the economical conversion of recalcitrant lignocellulose into useful intermediates, such as sugars. We report a high-yielding chemical process for the hydrolysis of biomass into monosaccharides. Adding water gradually to a chloride ionic liquid-containing catalytic acid leads to a nearly 90% yield of glucose from cellulose and 70-80% yield of sugars from untreated corn stover. Ion-exclusion chromatography allows recovery of the ionic liquid and delivers sugar feedstocks that support the vigorous growth of ethanologenic microbes. This simple chemical process, which requires neither an edible plant nor a cellulase, could enable crude biomass to be the sole source of carbon for a scalable biorefinery.

A model for improving microbial biofuel production using a synthetic feedback loop

Cells use feedback to implement a diverse range of regulatory functions. Building synthetic feedback control systems may yield insight into the roles that feedback can play in regulation since it can be introduced independently of native regulation, and alternative control architectures can be compared. We propose a model for microbial biofuel production where a synthetic control system is used to increase cell viability and biofuel yields. Although microbes can be engineered to produce biofuels, the fuels are often toxic to cell growth, creating a negative feedback loop that limits biofuel production. These toxic effects may be mitigated by expressing efflux pumps that export biofuel from the cell. We developed a model for cell growth and biofuel production and used it to compare several genetic control strategies for their ability to improve biofuel yields. We show that controlling efflux pump expression directly with a biofuel-responsive promoter is a straightforward way of improving biofuel production. In addition, a feed forward loop controller is shown to be versatile at dealing with uncertainty in biofuel production rates.

Production of biocommodities and bioelectricity by cell-free synthetic enzymatic pathway biotransformations: challenges and opportunities

Cell-free synthetic (enzymatic) pathway biotransformation (SyPaB) is the assembly of a number of purified enzymes (usually more than 10) and coenzymes for the production of desired products through complicated biochemical reaction networks that a single enzyme cannot do. Cell-free SyPaB, as compared to microbial fermentation, has several distinctive advantages, such as high product yield, great engineering flexibility, high product titer, and fast reaction rate. Biocommodities (e.g., ethanol, hydrogen, and butanol) are low-value products where costs of feedstock carbohydrates often account for approximately 30-70% of the prices of the products. Therefore, yield of biocommodities is the most important cost factor, and the lowest yields of profitable biofuels are estimated to be ca. 70% of the theoretical yields of sugar-to-biofuels based on sugar prices of ca. US$ 0.18 per kg. The opinion that SyPaB is too costly for producing low-value biocommodities are mainly attributed to the lack of stable standardized building blocks (e.g., enzymes or their complexes), costly labile coenzymes, and replenishment of enzymes and coenzymes. In this perspective, I propose design principles for SyPaB, present several SyPaB examples for generating hydrogen, alcohols, and electricity, and analyze the advantages and limitations of SyPaB. The economical analyses clearly suggest that developments in stable enzymes or their complexes as standardized parts, efficient coenzyme recycling, and use of low-cost and more stable biomimetic coenzyme analogs, would result in much lower production costs than do microbial fermentations because the stabilized enzymes have more than 3 orders of magnitude higher weight-based total turn-over numbers than microbial biocatalysts, although extra costs for enzyme purification and stabilization are spent.

Butanol production by Clostridium beijerinckii ATCC 55025 from wheat bran

Wheat bran, a by-product of the wheat milling industry, consists mainly of hemicellulose, starch and protein. In this study, the hydrolysate of wheat bran pretreated with dilute sulfuric acid was used as a substrate to produce ABE (acetone, butanol and ethanol) using Clostridium beijerinckii ATCC 55025. The wheat bran hydrolysate contained 53.1 g/l total reducing sugars, including 21.3 g/l of glucose, 17.4 g/l of xylose and 10.6 g/l of arabinose. C. beijerinckii ATCC 55025 can utilize hexose and pentose simultaneously in the hydrolysate to produce ABE. After 72 h of fermentation, the total ABE in the system was 11.8 g/l, of which acetone, butanol and ethanol were 2.2, 8.8 and 0.8 g/l, respectively. The fermentation resulted in an ABE yield of 0.32 and productivity of 0.16 g l(-1) h(-1). This study suggests that wheat bran can be a potential renewable resource for ABE fermentation.

The path to next generation biofuels: successes and challenges in the era of synthetic biology

Volatility of oil prices along with major concerns about climate change, oil supply security and depleting reserves have sparked renewed interest in the production of fuels from renewable resources. Recent advances in synthetic biology provide new tools for metabolic engineers to direct their strategies and construct optimal biocatalysts for the sustainable production of biofuels. Metabolic engineering and synthetic biology efforts entailing the engineering of native and de novo pathways for conversion of biomass constituents to short-chain alcohols and advanced biofuels are herewith reviewed. In the foreseeable future, formal integration of functional genomics and systems biology with synthetic biology and metabolic engineering will undoubtedly support the discovery, characterization, and engineering of new metabolic routes and more efficient microbial systems for the production of biofuels.

Practical application of synthetic biology principles

Synthetic biology can be defined as the "repurposing and redesign of biological systems for novel purposes or applications, " and the field lies at the interface of several biological research areas. This broad definition can be taken to include a variety of investigative endeavors, and successful design of new biological paradigms requires integration of many scientific disciplines including (but not limited to) protein engineering, metabolic engineering, genomics, structural biology, chemical biology, systems biology, and bioinformatics. This review focuses on recent applications of synthetic biology principles in three areas: (i) the construction of artificial biomolecules and biomaterials; (ii) the synthesis of both fine and bulk chemicals (including biofuels); and (iii) the construction of "smart" biological systems that respond to the surrounding environment.

Pentanol isomer synthesis in engineered microorganisms

Pentanol isomers such as 2-methyl-1-butanol and 3-methyl-1-butanol are a useful class of chemicals with a potential application as biofuels. They are found as natural by-products of microbial fermentations from amino acid substrates. However, the production titer and yield of the natural processes are too low to be considered for practical applications. Through metabolic engineering, microbial strains for the production of these isomers have been developed, as well as that for 1-pentanol and pentenol. Although the current production levels are still too low for immediate industrial applications, the approach holds significant promise for major breakthroughs in production efficiency.

Production of aromatic compounds in bacteria

The aromatic class of chemicals includes a large number of industrially important products. In bacteria and plants, the shikimate pathway and related biosynthetic pathways are a source of aromatic compounds having commercial value. Bacterial strains for the production of aromatic compounds from simple carbon sources as raw material have been generated by applying metabolic engineering and random/combinatorial strategies that modify central metabolism, aromatic biosynthetic pathways, transport, and regulatory functions. These strategies are complemented with heterologous gene expression and protein engineering. Engineered Escherichia coli and Pseudomonas putida strains are enabling the development of sustainable processes for the manufacture of 2-phenylethanol, p-hydroxycinnamic acid, p-hydroxystyrene, p-hydroxybenzoate, anthranilate, and cyclohexadiene-transdiols, among other useful chemicals.

Microbial production of glyceric acid, an organic acid that can be mass produced from glycerol

Glyceric acid (GA), an unfamiliar biotechnological product, is currently produced as a small by-product of dihydroxyacetone production from glycerol by Gluconobacter oxydans. We developed a method for the efficient biotechnological production of GA as a target compound for new surplus glycerol applications in the biodiesel and oleochemical industries. We investigated the ability of 162 acetic acid bacterial strains to produce GA from glycerol and found that the patterns of productivity and enantiomeric GA compositions obtained from several strains differed significantly. The growth parameters of two different strain types, Gluconobacter frateurii NBRC103465 and Acetobacter tropicalis NBRC16470, were optimized using a jar fermentor. G. frateurii accumulated 136.5 g/liter of GA with a 72% d-GA enantiomeric excess (ee) in the culture broth, whereas A. tropicalis produced 101.8 g/liter of d-GA with a 99% ee. The 136.5 g/liter of glycerate in the culture broth was concentrated to 236.5 g/liter by desalting electrodialysis during the 140-min operating time, and then, from 50 ml of the concentrated solution, 9.35 g of GA calcium salt was obtained by crystallization. Gene disruption analysis using G. oxydans IFO12528 revealed that the membrane-bound alcohol dehydrogenase (mADH)-encoding gene (adhA) is required for GA production, and purified mADH from G. oxydans IFO12528 catalyzed the oxidation of glycerol. These results strongly suggest that mADH is involved in GA production by acetic acid bacteria. We propose that GA is potentially mass producible from glycerol feedstock by a biotechnological process.

The family 1 glycoside hydrolase from Clostridium cellulolyticum H10 is a cellodextrin glucohydrolase

The only family 1 glycoside hydrolase in Clostridium cellulolyticum H10 (CcGH1) is annotated as a beta-galactosidase but has high sequence homology with many beta-glucosidases. Given the possible importance of beta-glucosidase in cellulose utilization by C. cellulolyticum, the encoding open reading frame Ccel_0374 was cloned and expressed in E. coli as a soluble fusion protein with thioredoxin. After tag cleavage, the purified enzyme had a molecular mass of 52 kDa and was active in dimeric form on a broad range of substrates, including cellobiose, cellotriose, cellotetraose, p-nitrophenyl-beta-glucopyranoside, lactose, and o-nitrophenyl-beta-galactopyranoside. The enzyme showed lower K(m) and higher catalytic efficiency (k (cat)/K(m)) on cellodextrins with degree of polymerization from 2 to 4 than on lactose, and the k (cat)/K (m) values on cellodextrins increased in the order of cellobiose < cellotriose < cellotetraose, suggesting that CcGH1 was a cellodextrin glucohydrolase (EC 3.2.1.74). The high K(m) (69 mM) on cellobiose implies that CcGH1 likely has a minimal role in the intracellular hydrolysis of cellobiose in C. cellulolyticum. The three-dimensional structure model of CcGH1 generated by homology modeling showed a typical (alpha/beta)(8) barrel topology characteristic of family 1 glycoside hydrolases.

Automated design of synthetic ribosome binding sites to control protein expression

Microbial engineering often requires fine control over protein expression; for example, to connect genetic circuits 1-7 or control flux through a metabolic pathway 8-13. We have developed a predictive design method for synthetic ribosome binding sites that enables the rational control of a protein's production rate on a proportional scale. Experimental validation of over 100 predictions in Escherichia coli shows that the method is accurate to within a factor of 2.3 over a range of 100,000-fold. The design method also correctly predicts that reusing a ribosome binding site sequence in different genetic contexts can result in different protein expression levels. We demonstrate the method's utility by rationally optimizing a protein's expression level to connect a genetic sensor to a synthetic circuit. The proposed forward engineering approach will accelerate the construction and systematic optimization of large genetic systems.

Synthesis at the interface of chemistry and biology

As the focus of synthesis increasingly shifts from its historical emphasis on molecular structure to function, improved strategies are clearly required for the generation of molecules with defined physical, chemical, and biological properties. In contrast, living organisms are remarkably adept at producing molecules and molecular assemblies with an impressive array of functions - from enzymes and antibodies to the photosynthetic center. Thus, the marriage of Nature's synthetic strategies, molecules, and biosynthetic machinery with more traditional synthetic approaches might enable the generation of molecules with properties difficult to achieve by chemical strategies alone. Here we illustrate the potential of this approach and overview some opportunities and challenges in the coming years.

Acetolactate synthase from Bacillus subtilis serves as a 2-ketoisovalerate decarboxylase for isobutanol biosynthesis in Escherichia coli

A pathway toward isobutanol production previously constructed in Escherichia coli involves 2-ketoacid decarboxylase (Kdc) from Lactococcus lactis that decarboxylates 2-ketoisovalerate (KIV) to isobutyraldehyde. Here, we showed that a strain lacking Kdc is still capable of producing isobutanol. We found that acetolactate synthase from Bacillus subtilis (AlsS), which originally catalyzes the condensation of two molecules of pyruvate to form 2-acetolactate, is able to catalyze the decarboxylation of KIV like Kdc both in vivo and in vitro. Mutational studies revealed that the replacement of Q487 with amino acids with small side chains (Ala, Ser, and Gly) diminished only the decarboxylase activity but maintained the synthase activity.

Protein engineering in designing tailored enzymes and microorganisms for biofuels production

Lignocellulosic biofuels represent a sustainable, renewable, and the only foreseeable alternative energy source to transportation fossil fuels. However, the recalcitrant nature of lignocellulose poses technical hurdles to an economically viable biorefinery. Low enzymatic hydrolysis efficiency and low productivity, yield, and titer of biofuels are among the top cost contributors. Protein engineering has been used to improve the performance of lignocellulose-degrading enzymes, as well as proteins involved in biofuel synthesis pathways. Unlike its great success seen in other industrial applications, protein engineering has achieved only modest results in improving the lignocellulose-to-biofuels efficiency. This review will discuss the unique challenges that protein engineering faces in the process of converting lignocellulose to biofuels and how they are addressed by recent advances in this field.

Synthesis of methyl halides from biomass using engineered microbes

Methyl halides are used as agricultural fumigants and are precursor molecules that can be catalytically converted to chemicals and fuels. Plants and microorganisms naturally produce methyl halides, but these organisms produce very low yields or are not amenable to industrial production. A single methyl halide transferase (MHT) enzyme transfers the methyl group from the ubiquitous metabolite S-adenoyl methionine (SAM) to a halide ion. Using a synthetic metagenomic approach, we chemically synthesized all 89 putative MHT genes from plants, fungi, bacteria, and unidentified organisms present in the NCBI sequence database. The set was screened in Escherichia coli to identify the rates of CH(3)Cl, CH(3)Br, and CH(3)I production, with 56% of the library active on chloride, 85% on bromide, and 69% on iodide. Expression of the highest activity MHT and subsequent engineering in Saccharomyces cerevisiae results in productivity of 190 mg/L-h from glucose and sucrose. Using a symbiotic co-culture of the engineered yeast and the cellulolytic bacterium Actinotalea fermentans, we are able to achieve methyl halide production from unprocessed switchgrass (Panicum virgatum), corn stover, sugar cane bagasse, and poplar (Populus sp.). These results demonstrate the potential of producing methyl halides from non-food agricultural resources.

Engineering the isobutanol biosynthetic pathway in Escherichia coli by comparison of three aldehyde reductase/alcohol dehydrogenase genes

Biofuels synthesized from renewable resources are of increasing interest because of global energy and environmental problems. We have previously demonstrated production of higher alcohols from Escherichia coli using a 2-keto acid-based pathway. Here, we have compared the effect of various alcohol dehydrogenases (ADH) for the last step of the isobutanol production. E. coli has the yqhD gene which encodes a broad-range ADH. Isobutanol production significantly decreased with the deletion of yqhD, suggesting that the yqhD gene on the genome contributed to isobutanol production. The adh genes of two bacteria and one yeast were also compared in E. coli harboring the isobutanol synthesis pathway. Overexpression of yqhD or adhA in E. coli showed better production than ADH2, a result confirmed by activity measurements with isobutyraldehyde.

Problems with the microbial production of butanol

With the incessant fluctuations in oil prices and increasing stress from environmental pollution, renewed attention is being paid to the microbial production of biofuels from renewable sources. As a gasoline substitute, butanol has advantages over traditional fuel ethanol in terms of energy density and hygroscopicity. A variety of cheap substrates have been successfully applied in the production of biobutanol, highlighting the commercial potential of biobutanol development. In this review, in order to better understand the process of acetone-butanol-ethanol production, traditional clostridia fermentation is discussed. Sporulation is probably induced by solvent formation, and the molecular mechanism leading to the initiation of sporulation and solventogenesis is also investigated. Different strategies are employed in the metabolic engineering of clostridia that aim to enhancing solvent production, improve selectivity for butanol production, and increase the tolerance of clostridia to solvents. However, it will be hard to make breakthroughs in the metabolic engineering of clostridia for butanol production without gaining a deeper understanding of the genetic background of clostridia and developing more efficient genetic tools for clostridia. Therefore, increasing attention has been paid to the metabolic engineering of E. coli for butanol production. The importation and expression of a non-clostridial butanol-producing pathway in E. coli is probably the most promising strategy for butanol biosynthesis. Due to the lower butanol titers in the fermentation broth, simultaneous fermentation and product removal techniques have been developed to reduce the cost of butanol recovery. Gas stripping is the best technique for butanol recovery found so far.

Disruption of the acetoacetate decarboxylase gene in solvent-producing Clostridium acetobutylicum increases the butanol ratio

A possible way to improve the economic efficacy of acetone-butanol-ethanol fermentation is to increase the butanol ratio by eliminating the production of other by-products, such as acetone. The acetoacetate decarboxylase gene (adc) in the hyperbutanol-producing industrial strain Clostridium acetobutylicum EA 2018 was disrupted using TargeTron technology. The butanol ratio increased from 70% to 80.05%, with acetone production reduced to approximately 0.21 g/L in the adc-disrupted mutant (2018adc). pH control was a critical factor in the improvement of cell growth and solvent production in strain 2018adc. The regulation of electron flow by the addition of methyl viologen altered the carbon flux from acetic acid production to butanol production in strain 2018adc, which resulted in an increased butanol ratio of 82% and a corresponding improvement in the overall yield of butanol from 57% to 70.8%. This study presents a general method of blocking acetone production by Clostridium and demonstrates the industrial potential of strain 2018adc.

Formation enthalpies and bond dissociation energies of alkylfurans. The strongest CX bonds known?

Enthalpies of formation, DeltaH(f)(298.15 K), of 2-methyl-, 3-methyl-, 2-ethyl-, 2-vinyl-, 2,3-dimethyl-, 2,4-dimethyl-, and 3,4-dimethylfurans are computed with three compound quantum chemical methods, CBS-QB3, CBS-APNO, and G3, via a number of isodesmic reactions. We show that previously experimentally determined enthalpies of formation of furan itself, 2,5-dimethyl-, 2-tert-butyl-, and 2,5-di-tert-butylfurans are self-consistent but that for 2-vinylfuran is most probably in error. The formation enthalpies of over 20 furyl and furfuryl radicals have also been determined and consequently the bond dissociation energies of a number of C-H, C-CH(3), C-F, C-Cl, and C-OH bonds. The ring-carbon-H bonds in alkylfurans are much stronger than previously thought and are among the strongest ever C-H bonds recorded exceeding 500 kJ mol(-1). The relative thermodynamic instability of the various furyl radicals means that bonds to methyl, fluorine, and chlorine are also unusually strong. This is as a consequence of the inability of the radical to effectively delocalize the unpaired electron and the geometrical inflexibility of the five-membered heterocyclic ring. By way of contrast the furfuryl radicals are more stable than similar benzyl radicals which results in weaker side-chain C-H bonds than the corresponding toluene derivatives (although stronger than the corresponding cyclopentadiene analogue). These results have implications for the construction of detailed chemical kinetic models to account for the thermal decomposition and oxidation of alkylfurans either in engines or in the atmosphere.

An integrated network approach identifies the isobutanol response network of Escherichia coli

Isobutanol has emerged as a potential biofuel due to recent metabolic engineering efforts. Here we used gene expression and transcription network connectivity data, genetic knockouts, and network component analysis (NCA) to map the initial isobutanol response network of Escherichia coli under aerobic conditions. NCA revealed profound perturbations to respiration. Further investigation showed ArcA as an important mediator of this response. Quinone/quinol malfunction was postulated to activate ArcA, Fur, and PhoB in this study. In support of this hypothesis, quinone-linked ArcA and Fur target expressions were significantly less perturbed by isobutanol under fermentative growth whereas quinol-linked PhoB target expressions remained activated, and isobutanol impeded growth on glycerol, which requires quinones, more than on glucose. In addition, ethanol, n-butanol, and isobutanol response networks were compared. n-Butanol and isobutanol responses were qualitatively similar, whereas ethanol had notable induction differences of pspABCDE and ndh, whose gene products manage proton motive force. The network described here could aid design and comprehension of alcohol tolerance, whereas the approach provides a general framework to characterize complex phenomena at the systems level.

Resistance to diet-induced obesity in mice with synthetic glyoxylate shunt

Given the success in engineering synthetic phenotypes in microbes and mammalian cells, constructing non-native pathways in mammals has become increasingly attractive for understanding and identifying potential targets for treating metabolic disorders. Here, we introduced the glyoxylate shunt into mouse liver to investigate mammalian fatty acid metabolism. Mice expressing the shunt showed resistance to diet-induced obesity on a high-fat diet despite similar food consumption. This was accompanied by a decrease in total fat mass, circulating leptin levels, plasma triglyceride concentration, and a signaling metabolite in liver, malonyl-CoA, that inhibits fatty acid degradation. Contrary to plants and bacteria, in which the glyoxylate shunt prevents the complete oxidation of fatty acids, this pathway when introduced in mice increases fatty acid oxidation such that resistance to diet-induced obesity develops. This work suggests that using non-native pathways in higher organisms to explore and modulate metabolism may be a useful approach.