Generation of Haploid Spermatids on Silk Fibroin-Alginate-Laminin-Based Porous 3D Scaffolds

In vitro production of sperm is a desirable idea for fertility preservation in azoospermic men and prepubertal boys suffering from cancer. In this study, a biocompatible porous scaffold based on a triad mixture of silk fibroin (SF), alginate (Alg), and laminin (LM) is developed to facilitate the differentiation of mouse spermatogonia stem cells (SSCs). Following SF extraction, the content is analyzed by SDS-PAGE and stable porous 3D scaffolds are successfully prepared by merely Alg, SF, and a combination of Alg-SF, or Alg-SF-LM through freeze-drying. Then, the biomimetic scaffolds are characterized regarding the structural and biological properties, water absorption capacity, biocompatibility, biodegradability, and mechanical behavior. Neonatal mice testicular cells are seeded on three-dimensional scaffolds and their differentiation efficiency is evaluated using real-time PCR, flow cytometry, immunohistochemistry. Blend matrices showed uniform porous microstructures with interconnected networks, which maintained long-term stability and mechanical properties better than homogenous structures. Molecular analysis of the cells after 21 days of culture showed that the expression of differentiation-related proteins in cells that are developed in composite scaffolds is significantly higher than in other groups. The application of a composite system can lead to the differentiation of SSCs, paving the way for a novel infertility treatment landscape in the future.

Immune response to foreign materials in spinal fusion surgery

Spinal fusion surgery is a common procedure used to stabilize the spine and treat back pain. The procedure involves the use of foreign materials such as screws, rods, or cages, which can trigger a foreign body reaction, an immune response that involves the activation of immune cells such as macrophages and lymphocytes. The foreign body reaction can impact the success of spinal fusion, as it can interfere with bone growth and fusion. This review article provides an overview of the cellular and molecular events in the foreign body reaction, the impact of the immune response on spinal fusion, and strategies to minimize its impact. By carefully considering the use of foreign materials and optimizing surgical techniques, the impact of the foreign body reaction can be reduced, leading to better outcomes for patients.

Impact of Bone-Grafting Materials on the Rate of Orthodontic Tooth Movement: A Systematic Review

Orthodontists may encounter patients with alveolar bony defects, which are often treated with various bone-grafting materials. The effects of different bone-grafting materials on orthodontic tooth movement (OTM) are of concern to orthodontists. Therefore, we aimed to evaluate the current status of the literature that reports on the effects of different bone-grafting materials on OTM in terms of the rate and side effects. An electronic search of the PubMed and Scopus databases and Google Scholar was performed. Two reviewers independently conducted the screening process using COVIDENCE™, and a third reviewer resolved any conflicts. SYRCLE's (Systematic Review Centre for Laboratory Animal Experimentation's) risk-of-bias tool for animal studies was utilized to assess the quality of the included studies. Out of 457 initial titles, 11 studies were finally included for data extraction. All of the included studies were animal experiments, and none of them were considered to have a low risk of bias. The included studies had varied results. However, a general tendency existed, whereby OTM in surgically treated areas with no bone grafting presented the highest OTM rate. In cases where a bone graft was used, xenografts revealed the highest OTM rate, followed by alloplasts. Lastly, the use of allografts resulted in the slowest OTM rates. The most common side effect was root resorption. In conclusion, there is a lack of high-quality evidence regarding the effects of bone-grafting materials on OTM rate. Due to the lack of human subjects, RCTs, and the heterogeneity of subjects in the current literature, the impact of bone-grafting materials on OTM deserves further investigations using more rigorous scientific methodologies.

Biomaterials with antifungal strategies to fight oral infections

Oral fungal infections pose a threat to human health and increase the economic burden of oral diseases by prolonging and complicating treatment. A cost-effective strategy is to try to prevent these infections from happening in the first place. With this purpose, biomaterials with antifungal properties are a crucial element to overcome fungal infections in the oral cavity. In this review, we go through different kinds of biomaterials and coatings that can be used to functionalize them. We also review their potential as a therapeutic approach in addition to prophylaxis, by going through traditional and alternative antifungal compounds, e.g., essential oils, that could be incorporated in them, to enhance their efficacy against fungal pathogens. We aim to highlight the potential of these technologies and propose questions that need to be addressed in prospective research. Finally, we intend to concatenate the key aspects and technologies on the use of biomaterials in oral health, to create an easy to find summary of the current state-of-the-art for researchers in the field.

Research progress of 3D printed poly (ether ether ketone) in the reconstruction of craniomaxillofacial bone defects

The clinical challenge of bone defects in the craniomaxillofacial region, which can lead to significant physiological dysfunction and psychological distress, persists due to the complex and unique anatomy of craniomaxillofacial bones. These critical-sized defects require the use of bone grafts or substitutes for effective reconstruction. However, current biomaterials and methods have specific limitations in meeting the clinical demands for structural reinforcement, mechanical support, exceptional biological performance, and aesthetically pleasing reconstruction of the facial structure. These drawbacks have led to a growing need for novel materials and technologies. The growing development of 3D printing can offer significant advantages to address these issues, as demonstrated by the fabrication of patient-specific bioactive constructs with controlled structural design for complex bone defects in medical applications using this technology. Poly (ether ether ketone) (PEEK), among a number of materials used, is gaining recognition as a feasible substitute for a customized structure that closely resembles natural bone. It has proven to be an excellent, conformable, and 3D-printable material with the potential to replace traditional autografts and titanium implants. However, its biological inertness poses certain limitations. Therefore, this review summarizes the distinctive features of craniomaxillofacial bones and current methods for bone reconstruction, and then focuses on the increasingly applied 3D printed PEEK constructs in this field and an update on the advanced modifications for improved mechanical properties, biological performance, and antibacterial capacity. Exploring the potential of 3D printed PEEK is expected to lead to more cost-effective, biocompatible, and personalized treatment of craniomaxillofacial bone defects in clinical applications.

Enhancing Polymethyl Methacrylate Prostheses for Cranioplasty with Ti mesh Inlays

Biocompatible polymers such as polymethyl methacrylate (PMMA), despite fulfilling biomedical aspects, lack the mechanical strength needed for hard-tissue implant applications. This gap can be closed by using composites with metallic reinforcements, as their adaptable mechanical properties can overcome this problem. Keeping this in mind, novel Ti-mesh-reinforced PMMA composites were developed. The influence of the orientation and volume fraction of the mesh on the mechanical properties of the composites was investigated. The composites were prepared by adding Ti meshes between PMMA layers, cured by hot-pressing above the glass transition temperature of PMMA, where the interdiffusion of PMMA through the spaces in the Ti mesh provided sufficient mechanical clamping and adhesion between the layers. The increase in the volume fraction of Ti led to a tremendous improvement in the mechanical properties of the composites. A significant anisotropic behaviour was analysed depending on the direction of the mesh. Furthermore, the shaping possibilities of these composites were investigated via four-point bending tests. High shaping possibility was found for these composites when they were shaped at elevated temperature. These promising results show the potential of these materials to be used for patient-specific implant applications.

The effect of leukocyte- and platelet-rich fibrin on the bone loss and primary stability of implants placed in posterior maxilla: a randomized clinical trial

PURPOSE

In this study, we investigated the effects of leukocyte- and platelet-rich fibrin (L-PRF) on implant stability and alterations in the marginal bone surrounding posterior maxillary implants.

METHODS

This randomized clinical trial was conducted to compare the variable of L-PRF placement around maxillary implants. Resonance frequency analysis (RFA) was used to evaluate the implant stability immediately after surgery and at 1, 2, 4, 6, 8, and 12 weeks after surgery (t0 to t6, respectively). In addition, the amount of marginal bone changes around the implant at t6 was compared with the baseline using periapical radiography.

RESULTS

The RFA outcomes were statistically significant within each group (P < 0.001, Eta2 = 0.322); however, in none of the follow-ups and immediately after the surgery, there was a significant difference between the two groups in terms of the implant stability quotient (ISQ) scores (P > 0.05). At t0, the test and control groups' respective mean levels of marginal bone loss around the implants were 0.4836 mm and 0.7343 mm, significantly different from the corresponding values at t6. On the other hand, marginal bone loss around the implant was not significantly different between the two groups in t0 and t6 (P = 0.532).

CONCLUSIONS

L-PRF did not improve the RFA outcomes of implants three months after implant placement, and changes in the ISQ values over time were the same in both groups. In addition, L-PRF had no superior effect on the marginal bone loss around the implants.

TRIAL REGISTRATION NUMBER

The research was registered in the Iranian Registry of Clinical Trials on 22 December 2020 (No: IRCT20200624047906N1), available at http://www.irct.ir.

A comparative analysis of 3D printed scaffolds consisting of poly(lactic-co-glycolic) acid and different bioactive mineral fillers: aspects of degradation and cytocompatibility

Their excellent mechanical properties, degradability and suitability for processing by 3D printing technologies make the thermoplastic polylactic acid and its derivatives favourable candidates for biomaterial-based bone regeneration therapies. In this study, we investigated whether bioactive mineral fillers, which are known to promote bone healing based on their dissolution products, can be integrated into a poly(L-lactic-co-glycolic) acid (PLLA-PGA) matrix and how key characteristics of degradation and cytocompatibility are influenced. The polymer powder was mixed with particles of CaCO3, SrCO3, strontium-modified hydroxyapatite (SrHAp) or tricalcium phosphates (α-TCP, β-TCP) in a mass ratio of 90 : 10; the resulting composite materials have been successfully processed into scaffolds by the additive manufacturing method Arburg Plastic Freeforming (APF). Degradation of the composite scaffolds was investigated in terms of dimensional change, bioactivity, ion (calcium, phosphate, strontium) release/uptake and pH development during long-term (70 days) incubation. The mineral fillers influenced the degradation behavior of the scaffolds to varying degrees, with the calcium phosphate phases showing a clear buffer effect and an acceptable dimensional increase. The amount of 10 wt% SrCO3 or SrHAp particles did not appear to be appropriate to release a sufficient amount of strontium ions to exert a biological effect in vitro. Cell culture experiments with the human osteosarcoma cell line SAOS-2 and human dental pulp stem cells (hDPSC) indicated the high cytocompatibility of the composites: For all material groups cell spreading and complete colonization of the scaffolds over the culture period of 14 days as well as an increase of the specific alkaline phosphatase activity, typical for osteogenic differentiation, were observed.

Fit and forget: The future of dental implant therapy via nanotechnology

Unlike orthopedic implants, dental implants require the orchestration of both osseointegration at the bone-implant interface and soft-tissue integration at the transmucosal region in a complex oral micro-environment with ubiquitous pathogenic bacteria. This represents a very challenging environment for early acceptance and long-term survival of dental implants, especially in compromised patient conditions, including aged, smoking and diabetic patients. Enabling advanced local therapy from the surface of titanium-based dental implants via novel nano-engineering strategies is emerging. This includes anodized nano-engineered implants eluting growth factors, antibiotics, therapeutic nanoparticles and biopolymers to achieve maximum localized therapeutic action. An important criterion is balancing bioactivity enhancement and therapy (like bactericidal efficacy) without causing cytotoxicity. Critical research gaps still need to be addressed to enable the clinical translation of these therapeutic dental implants. This review informs the latest developments, challenges and future directions in this domain to enable the successful fabrication of clinically-translatable therapeutic dental implants that would allow for long-term success, even in compromised patient conditions.

Biodegradable Gg-cl-poly(NIPAm-co-AA)/-o-MWCNT based hydrogel for combined drug delivery system of metformin and sodium diclofenac: in vitro studies

In the present study Gg-cl-poly(NIPA-co-AA) and Gg-cl-poly(NIPA-co-AA)/-o-MWCNT hydrogels were synthesized using free radical polymerization. We looked into whether combining metformin with diclofenac, a nonsteroidal anti-inflammatory drug (NSAID), would be effective in examining complex formation and analysing the types and intensities of complexes that could result from metformin-diclofenac interactions. The interaction of metformin and diclofenac was studied in vitro at various pH levels and body temperatures. The structure and morphology of the produced hydrogel were characterised using FTIR spectra, SEM analysis, and drug loading tests. As a model drug, the hydrogel was loaded with metformin hydrochloride and sodium diclofenac (DS), and the medicines were released pH-dependently. To explore the drug release kinetics and mechanism, the zero order and first order kinetic models, the Korsemeyar-Peppas model, the Higuchi model, and the Hixson-Crowell model have all been employed. Drug release studies revealed notable characteristics in connection to physiologically predicted pH values, with a high release rate at pH = 9.2. At pH = 9.2, however, both metformin and sodium diclofenac exhibited a Fickian mechanism. Combination treatment may reduce the effective dose of a single drug and hinder metabolic rescue mechanisms. More study is needed to detect any negative effects on individuals.

Biomedical Applications of the Biopolymer Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV): Drug Encapsulation and Scaffold Fabrication

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) is a biodegradable and biocompatible biopolymer that has gained popularity in the field of biomedicine. This review provides an overview of recent advances and potential applications of PHBV, with special emphasis on drug encapsulation and scaffold construction. PHBV has shown to be a versatile platform for drug delivery, offering controlled release, enhanced therapeutic efficacy, and reduced side effects. The encapsulation of various drugs, such as anticancer agents, antibiotics, and anti-inflammatory drugs, in PHBV nanoparticles or microspheres has been extensively investigated, demonstrating enhanced drug stability, prolonged release kinetics, and increased bioavailability. Additionally, PHBV has been used as a scaffold material for tissue engineering applications, such as bone, cartilage, and skin regeneration. The incorporation of PHBV into scaffolds has been shown to improve mechanical properties, biocompatibility, and cellular interactions, making them suitable for tissue engineering constructs. This review highlights the potential of PHBV in drug encapsulation and scaffold fabrication, showing its promising role in advancing biomedical applications.

Effect of Er:YAG Laser Exposure on the Amorphous Smear Layer in the Marginal Zone of the Osteotomy Site for Placement of Dental Screw Implants: A Histomorphological Study

The placement of dental screw implants typically involves the use of rotary techniques and drills to create a bone bed. This study explores the potential benefits of combining this method with an Er:YAG laser. Split osteotomies were performed on 10 jaws of euthanized domestic pigs (Sus scrofa domestica), with 12 mandibular implant osteotomies in each jaw, divided into 4 groups. In order to make a comprehensive assessment of the effect of Er:YAG lasers, histomorphological techniques were used to measure the reduction in amorphous layer thickness after Er:YAG laser treatment, both with and without the placement of dental screw implants from different manufacturers. Following bone decalcification and staining, the thickness of the amorphous layer was measured in four groups: Group A-osteotomy performed without Er:YAG laser treatment-had amorphous layer thicknesses ranging from 21.813 to 222.13 µm; Group B-osteotomy performed with Er:YAG laser treatment-had amorphous layer thicknesses ranging from 6.08 to 64.64 µm; Group C-an implant placed in the bone without laser treatment-had amorphous layer thicknesses of 5.90 to 54.52 µm; and Group D-an implant placed after bone treatment with Er:YAG laser-had amorphous layer thicknesses of 1.29 to 7.98 µm. The examination and photomicrodocumentation was performed using a LEICA DM1000 LED microscope (Germany) and LAS V 4.8 software (Leica Application Suite V4, Leica Microsystems, Germany). When comparing group A to group B and group C to D, statistically significant differences were indicated (p-value = 0.000, p < 0.05). The study demonstrates the synergistic effects and the possibility of integrating lasers into the conventional implantation protocol. By applying our own method of biomodification, the smear layer formed during rotary osteotomy can be reduced using Er:YAG lasers. This reduction leads to a narrower peri-implant space and improved bone-to-implant contact, facilitating accelerated osseointegration.

Physico chemical characterisation of pectin incorporated gelatin sponge and its functional evaluation in modulating contact activation haemostasis

Even though it is a common occurrence in practice, maintaining haemostasis can sometimes become a challenging issue in case of trauma, perioperative period, coagulation disorders, cancers, etc. Hemostatic materials are extensively used to assist in the cessation of bleeding. However, the definition of efficiency of haemostasis varies between intended procedures. This paper explores the feasibility of incorporating agents to increase the efficiency of local haemostasis. Pectin or β -D galacto hexopyranuronic acid/β Gal A, a structural polysaccharide widely present in terrestrial plants having an intrinsic hemostatic potential, is blended with gelatin and is explored in modulating passive haemostasis. The sponges are physico chemically characterized, and their hemostatic efficiency is evaluated in vitro using various assays. Biocompatibility evaluation is done by in vitro cytotoxicity assay. The results suggest that this biopolymer combination is a promising candidate for hemostatic control.

The molecular link between obstructive sleep apnea and osteoarthritis: based on bioinformatics analysis and experimental validation

BACKGROUND

Obstructive sleep apnea (OSA) and osteoarthritis (OA) are highly prevalent and seriously affect the patient's quality of life. Patients with OSA have a high incidence of OA, however, the underlying mechanism remains unclear. Here, we investigated the molecular link between OSA and OA via bioinformatics analysis and experimental validation.

METHODS

We downloaded a peripheral blood monocyte microarray profile (GSE75097) for patients with OSA and two synovial microarray profiles (GSE55235 and GSE55457) for patients with OA from the Gene Expression Omnibus database. We identified OSA-associated differentially expressed genes (OSA-DEGs) in patients with OA. Additionally, we constructed protein-protein interaction networks to identify the key genes involved in OA. Immunohistochemistry was performed to verify the expression of key genes in OA rat models. RNA interference assay was performed to validate the effects of key genes on synovial cells. Gene-miRNA, gene-transcription factor, and gene-drug networks were constructed to predict the regulatory molecules and drugs for OA.

RESULTS

Fifteen OSA-DEGs screened using the threshold criteria were enriched in the tumor necrosis factor (TNF) pathway. Combining the 12 algorithms of CytoHubba, we identified JUNB, JUN, dual specificity phosphatase 1 (DUSP1), and TNF-alpha-induced protein 3 (TNFAIP3) as the key OSA-DEGs involved in OA development. Immunohistochemistry and quantitative polymerase chain reaction revealed that these key genes were downregulated in the OA synovium, promoting TNF-α expression. Therefore, OSA-DEGs, JUN, JUNB, DUSP1, and TNFAIP3 function in OA by increasing TNF-α expression. Our findings provide insights on the mechanisms underlying the effects of OSA on OA.

The Effectiveness of Three-Dimensional Osteosynthesis Plates versus Conventional Plates for the Treatment of Skeletal Fractures: A Systematic Review and Meta-Analysis

PURPOSE

To assess the difference between preformed anatomically shaped osteosynthesis plates and patient-specific implants versus conventional flat plates for the treatment of skeletal fractures in terms of anatomical reduction, operation time, approach, patient outcomes, and complications.

MATERIAL AND METHODS

MEDLINE (1950 to February 2023), EMBASE (1966 to February 2023), and the Cochrane Central Register of Controlled Trials (inception to February 2023) databases were searched. Eligible studies were randomised clinical trials, prospective controlled clinical trials, and prospective and retrospective cohort studies (n ≥ 10). Inclusion criteria were studies reporting the outcomes of preformed anatomically shaped osteosynthesis plates and patient-specific implants versus conventional flat plates after treating skeletal fractures. Outcome measures included anatomical reduction, stability, operation time, hospitalisation days, patients' outcomes, and complications. Two independent reviewers assessed the abstracts and analysed the complete texts and methodologies of the included studies.

RESULTS

In total, 21 out of the 5181 primarily selected articles matched the inclusion criteria. A meta-analysis revealed a significant difference in operation time in favour of the preformed anatomical plates and patient-specific implants versus conventional plates. Significant differences in operation time were found for the orbital (95% CI: -50.70-7.49, p = 0.008), upper limb (95% CI: -17.91-6.13, p < 0.0001), and lower limb extremity groups (95% CI: -20.40-15.11, p < 0.00001). The mean difference in the rate of anatomical reduction in the lower limb extremity group (95% CI: 1.04-7.62, p = 0.04) was also in favour of using preformed anatomical plates and patient-specific implants versus conventional plates.

CONCLUSIONS

This systematic review showed a significant mean difference in surgery time favouring the use of preformed anatomical plates and patient-specific implants for orbital, upper, and lower limb extremity fractures. Additionally, preformed anatomical plates and patient-specific implants in the lower limb group result in a significantly higher rate of anatomical reduction versus conventional flat plates.

The role of fibromodulin in inflammatory responses and diseases associated with inflammation

Inflammation is an immune response that the host organism eliminates threats from foreign objects or endogenous signals. It plays a key role in the progression, prognosis as well as therapy of diseases. Chronic inflammatory diseases have been regarded as the main cause of death worldwide at present, which greatly affect a vast number of individuals, producing economic and social burdens. Thus, developing drugs targeting inflammation has become necessary and attractive in the world. Currently, accumulating evidence suggests that small leucine-rich proteoglycans (SLRPs) exhibit essential roles in various inflammatory responses by acting as an anti-inflammatory or pro-inflammatory role in different scenarios of diseases. Of particular interest was a well-studied member, termed fibromodulin (FMOD), which has been largely explored in the role of inflammatory responses in inflammatory-related diseases. In this review, particular focus is given to the role of FMOD in inflammatory response including the relationship of FMOD with the complement system and immune cells, as well as the role of FMOD in the diseases associated with inflammation, such as skin wounding healing, osteoarthritis (OA), tendinopathy, atherosclerosis, and heart failure (HF). By conducting this review, we intend to gain insight into the role of FMOD in inflammation, which may open the way for the development of new anti-inflammation drugs in the scenarios of different inflammatory-related diseases.

Osseointegration of Tantalum Trabecular Metal in Titanium Dental Implants: Histological and Micro-CT Study

This study aimed to investigate the impact of the Tantalum Trabecular Metal dental implant design on implant stability and the process of osseointegration following its placement in the rabbit femoral condyle. The subjects for the experiment consisted of 10 New Zealand white rabbits. Twenty implants, comprising 10 Trabecular Metal (TM) and 10 Traditional Screw Vent (TSV) implants, were placed into the femoral condyles of these rabbits. The implant type was alternated based on a random sequence. Following a healing period of 8 weeks, the implants were retrieved for further analysis using micro-computed tomography (micro-CT), histological studies, and histomorphometry evaluations. The Bone-to-Implant Contact (BIC) ratio and the Bone Volume (BV) percentage in the region of interest were subsequently assessed. The BIC and BV values between TM and TSV implants were compared using the Student t-test. The TM implants exhibited significantly greater BIC and BV scores. In particular, the BIC percentage was recorded as 57.9 ± 6.5 for the TM implants, as opposed to 47.6 ± 8 for the TSV implants. Correspondingly, the BV percentage was 57 ± 7.3 for the TM implants and 46.4 ± 7.4 for the TSV implants. The bone volume percentage measured using micro-CT evaluation was 89.1 ± 8.7 for the TM implants and 79.1 ± 8.6 for the TSV implants. Given the observed results, it is plausible to suggest that the bone growth surrounding the tantalum mesh could have improved the integration of the bone and facilitated its ingrowth into the TM implant.

To determine the effect of plasma nitriding treatment 56 on screw loosening and surface topography of different 78 implant-abutment screw systems with and without thermocycling: An in vitro study

Aim

The aim of this study was to evaluate and compare the effect of plasma nitride-treated abutment screws of two different implant systems on screw loosening and surface topography with and without thermocycling.

Settings and Design

This was an in-vitro experimental study.

Materials and Methods

Fifty-two abutment screws (Group A: 26 Genesis and Group B: 26 Bredent) underwent plasma nitride treatment and were subdivided into two groups, one without thermocycling and one with thermocycling. Dynamic load was applied and detorque values were evaluated for determining the screw loosening using "independent t-test" with the help of IBM SPSS Statistics 20 and scanning electron microscopy was done to check for surface topography.

Statistical Analysis Used

Inter- and intragroup comparisons were done using independent t-test (SPSS: Statistical Package for the Social Sciences software version 20).

Results

Plasma nitriding treatment genesis implant system abutment screw showed more screw loosening (P < 0.05) and surface roughness as compared to bredent with and without thermocycling.

Conclusion

From the present study, it was shown that plasma nitride-treated abutment screws decreased the occurrence of screw loosening favoring the bredent implant-abutment system more than the genesis implant-abutment system.

Research progress and application of the CRISPR/Cas9 gene-editing technology based on hepatocellular carcinoma

Hepatocellular carcinoma (HCC) is now a common cause of cancer death, with no obvious change in patient survival over the past few years. Although the traditional therapeutic modalities for HCC patients mainly involved in surgery, chemotherapy, and radiotherapy, which have achieved admirable achievements, challenges are still existed, such as drug resistance and toxicity. The emerging gene therapy of clustered regularly interspaced short palindromic repeat/CRISPR-associated nuclease 9-based (CRISPR/Cas9), as an alternative to traditional treatment methods, has attracted considerable attention for eradicating resistant malignant tumors and regulating multiple crucial events of target gene-editing. Recently, advances in CRISPR/Cas9-based anti-drugs are presented at the intersection of science, such as chemistry, materials science, tumor biology, and genetics. In this review, the principle as well as statues of CRISPR/Cas9 technique were introduced first to show its feasibility. Additionally, the emphasis was placed on the applications of CRISPR/Cas9 technology in therapeutic HCC. Further, a broad overview of non-viral delivery systems for the CRISPR/Cas9-based anti-drugs in HCC treatment was summarized to delineate their design, action mechanisms, and anticancer applications. Finally, the limitations and prospects of current studies were also discussed, and we hope to provide comprehensively theoretical basis for the designing of anti-drugs.

Small leucine rich proteoglycans: Biology, function and their therapeutic potential in the ocular surface

Small leucine rich proteoglycans (SLRPs) are the largest family of proteoglycans, with 18 members that are subdivided into five classes. SLRPs are small in size and can be present in tissues as glycosylated and non-glycosylated proteins, and the most studied SLRPs include decorin, biglycan, lumican, keratocan and fibromodulin. SLRPs specifically bind to collagen fibrils, regulating collagen fibrillogenesis and the biomechanical properties of tissues, and are expressed at particularly high levels in fibrous tissues, such as the cornea. However, SLRPs are also very active components of the ECM, interacting with numerous growth factors, cytokines and cell surface receptors. Therefore, SLRPs regulate major cellular processes and have a central role in major fundamental biological processes, such as maintaining corneal homeostasis and transparency and regulating corneal wound healing. Over the years, mutations and/or altered expression of SLRPs have been associated with various corneal diseases, such as congenital stromal corneal dystrophy and cornea plana. Recently, there has been great interest in harnessing the various functions of SLRPs for therapeutic purposes. In this comprehensive review, we describe the structural features and the related functions of SLRPs, and how these affect the therapeutic potential of SLRPs, with special emphasis on the use of SLRPs for treating ocular surface pathologies.

Strategic outline of interventions targeting extracellular matrix for promoting healthy longevity

The extracellular matrix (ECM), composed of interlinked proteins outside of cells, is an important component of the human body that helps maintain tissue architecture and cellular homeostasis. As people age, the ECM undergoes changes that can lead to age-related morbidity and mortality. Despite its importance, ECM aging remains understudied in the field of geroscience. In this review, we discuss the core concepts of ECM integrity, outline the age-related challenges and subsequent pathologies and diseases, summarize diagnostic methods detecting a faulty ECM, and provide strategies targeting ECM homeostasis. To conceptualize this, we built a technology research tree to hierarchically visualize possible research sequences for studying ECM aging. This strategic framework will hopefully facilitate the development of future research on interventions to restore ECM integrity, which could potentially lead to the development of new drugs or therapeutic interventions promoting health during aging.

SIRT3-and FAK-mediated acetylation-phosphorylation crosstalk of NFATc1 regulates Nε-carboxymethyl-lysine-induced vascular calcification in diabetes mellitus

BACKGROUND AND AIMS

Arterial calcification is the predictor of cardiovascular risk in diabetic patients. N^ε-carboxymethyl-lysine (CML), a toxic metabolite, is associated with accelerated vascular calcification in diabetes mellitus (DM). However, the mechanism remains elusive. This study aims to explore the key regulators involved in CML-induced vascular calcification in DM.

METHODS

We used Western blot and immuno-staining to test the expression and localization of nuclear factor of activated T cells, cytoplasmic 1 (NFATc1) in human samples, a diabetic apolipoprotein E-deficient (ApoE^-/-) mouse model, and a vascular smooth muscle cells (VSMC) model. Further, we confirmed the regulator of NFATc1 phosphorylation and acetylation induced by CML. The role of NFATc1 in VSMCs calcification and osteogenic differentiation was explored in vivo and in vitro.

RESULTS

In diabetic patients, CML and NFATc1 levels increased in the severe calcified anterior tibial arteries. CML significantly promoted NFATc1 expression and nuclear translocation in VSMCs and mouse aorta. Knockdown of NFATc1 significantly inhibited CML-induced calcification. CML promoted NFATc1 acetylation at K549 by downregulating sirtuin 3 (SIRT3), which antagonized the focal adhesion kinase (FAK) induced NFATc1 phosphorylation at the Y270 site. FAK and SIRT3 affected the nuclear translocation of NFATc1 by regulating the acetylation-phosphorylation crosstalk. NFATc1 dephosphorylation mutant Y270F and deacetylation mutant K549R had opposite effects on VSMC calcification. SIRT3 overexpression and FAK inhibitor could reverse CML-promoted VSMC calcification.

CONCLUSIONS

CML enhances vascular calcification in DM through NFATc1. In this process, CML increases NFATc1 acetylation by downregulating SIRT3 to antagonize FAK-induced NFATc1 phosphorylation.

Effect of Enterococcus faecalis Biofilm on Corrosion Kinetics in Titanium Grade 4 Alloys with Different Surface Treatments

E. faecalis has been associated with bacteremia, sepsis, and bacterial endocarditis and peri-implantitis. This microorganism can remain in the alveolus even after extraction of the root remnant. This study aimed to evaluate the corrosion on different surfaces of commercially pure titanium (Ti) grade 4 (Ticp-G4) as a function of the bacterial biofilm effect of Enterococcus faecalis. A total of 57 discs were randomly divided according to their surface finish (n = 19). For microbiological analysis (n = 9), the discs were placed in 12-well plates containing E. faecalis culture and incubated at 37 °C for 7 days. The results show that for the intergroup analysis, considering the "electrolyte" factor, there was a difference between the groups. There was greater biofilm formation for the D.A.Zir group, with greater electrochemical exchange for Biofilm, and the presence of biofilm favored greater electrochemical exchange with the medium.

Reasons for the Sex Bias in Osteoarthritis Research: A Review of Preclinical Studies

Osteoarthritis (OA) is one of the most common degenerative diseases of articular cartilage. During OA, all the elements that contribute to the joint undergo physiological and structural changes that impair the joint function and cause joint pain and stiffness. OA can arise naturally, with the aging population witnessing an increase in diagnoses of this pathology, but the root causes of OA have yet to be identified, and increasing interest is arising towards investigating biological sex as a risk factor. Clinical studies show increased prevalence and worse clinical outcomes for female patients, yet most clinical and preclinical studies have disproportionately focused on male subjects. This review provides a critical overview of preclinical practices in the context of OA, highlighting the underlying need for taking biological sex as both a risk factor and an important component affecting treatment outcome. A unique insight into the possible reasons for female underrepresentation in preclinical studies is offered, including factors such as lack of specific guidelines requiring the analysis of sex as a biological variable (SABV), research-associated costs and animal handling, and wrongful application of the reduction principle. Additionally, a thorough investigation of sex-related variables is provided, stressing how each of them could add valuable information for the understanding of OA pathophysiology, as well as sex-dependent treatment strategies.

Surface Modification of Titanium Implants by Metal Ions and Nanoparticles for Biomedical Application

Implant surface modification can improve osseointegration and reduce peri-implant inflammation. Implant surfaces are modified with metals because of their excellent mechanical properties and significant functions. Metal surface modification is divided into metal ions and nanoparticle surface modification. These two methods function by adding a finishing metal to the surface of the implant, and both play a role in promoting osteogenic, angiogenic, and antibacterial properties. Based on this, the nanostructural surface changes confer stronger antibacterial and cellular affinity to the implant surface. The current paper reviews the forms, mechanisms, and applications of nanoparticles and metal ion modifications to provide a foundation for the surface modification of implants.

Hofmeister effect-based soaking strategy for gelatin hydrogels with adjustable gelation temperature, mechanical properties, and ionic conductivity

As a natural polymer with good biocompatibility, gelatin hydrogel has been widely used in the field of biomedical science for a long time. However, the lack of suitable gelation temperature and mechanical properties often limit the clinical applicability in diverse and complex environments. Here, we proposed a strategy based on the Hofmeister effect that gelatin hydrogels were soaked in the appropriate concentration of sodium sulfate solution, and the change in molecular chain interactions mainly guided by kosmotropic ions resulted in a comprehensive adjustment of multiple properties. A series of gelatin hydrogels treated with different concentrations of the salt solution gave rise to microstructural changes, which brought a decrease in the number and size of pores, a wide range of gelation temperature from 32 °C to 46 °C, a stress enhancement of about 40 times stronger to 0.8345 MPa, a strain increase of about 7 times higher to 238.05 %, and a certain degree of electrical conductivity to be utilized for versatile applications. In this regard, for example, we prepared microneedles and obtained a remarkable compression (punctuation) strength of 0.661 N/needle, which was 55 times greater than those of untreated ones. Overall, by integrating various characterizations and suggesting the corresponding mechanism behind the phenomenon, this method provides a simpler and more convenient performance control procedure. This allowed us to easily modulate the properties of the hydrogel as per the intended purpose, revealing its vast potential applications such as smart sensors, electronic skin, and drug delivery.

Development of Conjugated Kefiran-Chondroitin Sulphate Cryogels with Enhanced Properties for Biomedical Applications

Hydrogels based on natural polysaccharides can have unique properties and be tailored for several applications, which may be mainly limited by the fragile structure and weak mechanical properties of this type of system. We successfully prepared cryogels made of newly synthesized kefiran exopolysaccharide-chondroitin sulfate (CS) conjugate via carbodiimide-mediated coupling to overcome these drawbacks. The freeze-thawing procedure of cryogel preparation followed by lyophilization is a promising route to fabricate polymer-based scaffolds with countless and valuable biomedical applications. The novel graft macromolecular compound (kefiran-CS conjugate) was characterized through ¹H-NMR and FTIR spectroscopy-which confirmed the structure of the conjugate, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA)-which mirrored good thermal stability (degradation temperature of about 215 °C) and, finally, gel permeation chromatography-size exclusion chromatography (GPC-SEC)-which proved an increased molecular weight due to chemical coupling of kefiran with CS. At the same time, the corresponding cryogels physically crosslinked after the freeze-thawing procedure were investigated by scanning electron microscopy (SEM), Micro-CT, and dynamic rheology. The results revealed a prevalent contribution of elastic/storage component to the viscoelastic behavior of cryogels in swollen state, a micromorphology with micrometer-sized open pores fully interconnected, and high porosity (ca. 90%) observed for freeze-dried cryogels. Furthermore, the metabolic activity and proliferation of human adipose stem cells (hASCs), when cultured onto the developed kefiran-CS cryogel, was maintained at a satisfactory level over 72 h. Based on the results obtained, it can be inferred that the newly freeze-dried kefiran-CS cryogels possess a host of unique properties that render them highly suitable for use in tissue engineering, regenerative medicine, drug delivery, and other biomedical applications where robust mechanical properties and biocompatibility are crucial.

Additive Manufacturing of Bioactive Glass and Its Polymer Composites as Bone Tissue Engineering Scaffolds: A Review

Bioactive glass (BG) and its polymer composites have demonstrated great potential as scaffolds for bone defect healing. Nonetheless, processing these materials into complex geometry to achieve either anatomy-fitting designs or the desired degradation behavior remains challenging. Additive manufacturing (AM) enables the fabrication of BG and BG/polymer objects with well-defined shapes and intricate porous structures. This work reviewed the recent advancements made in the AM of BG and BG/polymer composite scaffolds intended for bone tissue engineering. A literature search was performed using the Scopus database to include publications relevant to this topic. The properties of BG based on different inorganic glass formers, as well as BG/polymer composites, are first introduced. Melt extrusion, direct ink writing, powder bed fusion, and vat photopolymerization are AM technologies that are compatible with BG or BG/polymer processing and were reviewed in terms of their recent advances. The value of AM in the fabrication of BG or BG/polymer composites lies in its ability to produce scaffolds with patient-specific designs and the on-demand spatial distribution of biomaterials, both contributing to effective bone defect healing, as demonstrated by in vivo studies. Based on the relationships among structure, physiochemical properties, and biological function, AM-fabricated BG or BG/polymer composite scaffolds are valuable for achieving safer and more efficient bone defect healing in the future.

Novel Strategies for Orofacial Soft Tissue Regeneration

Significance: Orofacial structures are indispensable for speech and eating, and impairment disrupts whole-body health through malnutrition and poor quality of life. However, due to the unique and highly specialized cell populations, tissue architecture, and healing microenvironments, regeneration in this region is challenging and inadequately addressed to date. Recent Advances: With increasing understanding of the nuanced physiology and cellular responses of orofacial soft tissue, novel scaffolds, seeded cells, and bioactive molecules were developed in the past 5 years to specifically target orofacial soft tissue regeneration, particularly for tissues primarily found within the orofacial region such as oral mucosa, taste buds, salivary glands, and masseter muscles. Critical Issues: Due to the tightly packed and complex anatomy, orofacial soft tissue injury commonly implicates multiple tissue types, and thus functional unit reconstruction in the orofacial region is more important than single tissue regeneration. Future Directions: This article reviews the up-to-date knowledge in this highly translational topic, which provides insights into novel biologically inspired and engineered strategies for regenerating orofacial component tissues and functional units.

Impact of nanotechnology on the oral delivery of phyto-bioactive compounds

Nanotechnology is an advanced field that has remarkable nutraceutical and food applications. Phyto-bioactive compounds (PBCs) play critical roles in promoting health and disease treatment. However, PBCs generally encounter several limitations that delay their widespread application. For example, most PBCs have low aqueous solubility, poor biostability, poor bioavailability, and a lack of target specificity. Moreover, the high concentrations of effective PBC doses also limit their application. As a result, encapsulating PBCs into an appropriate nanocarrier may increase their solubility and biostability and protect them from premature degradation. Moreover, nanoencapsulation could improve absorption and prolong circulation with a high opportunity for targeted delivery that may decrease unwanted toxicity. This review addresses the main parameters, variables, and barriers that control and affect oral PBC delivery. Moreover, this review discusses the potential role of biocompatible and biodegradable nanocarriers in improving the water solubility, chemical stability, bioavailability, and specificity/selectivity of PBCs.

Influence of Aluminum and Copper on Mechanical Properties of Biocompatible Ti-Mo Alloys: A Simulation-Based Investigation

The use of titanium and titanium-based alloys in the human body due to their resistance to corrosion, implant ology and dentistry has led to significant progress in promoting new technologies. Regarding their excellent mechanical, physical and biological performance, new titanium alloys with non-toxic elements and long-term performance in the human body are described today. The main compositions of Ti-based alloys and properties comparable to existing classical alloys (C.P. TI, Ti-6Al-4V, Co-Cr-Mo, etc.) are used for medical applications. The addition of non-toxic elements such as Mo, Cu, Si, Zr and Mn also provides benefits, such as reducing the modulus of elasticity, increasing corrosion resistance and improving biocompatibility. In the present study, when choosing Ti-9Mo alloy, aluminum and copper (Cu) elements were added to it. These two alloys were chosen because one element is considered a favorable element for the body (copper) and the other element is harmful to the body (aluminum). By adding the copper alloy element to the Ti-9Mo alloy, the elastic modulus decreases to a minimum value of 97 GPa, and the aluminum alloy element increases the elastic modulus up to 118 GPa. Due to their similar properties, Ti-Mo-Cu alloys are found to be a good optional alloy to use.

Breakthrough treatments for accelerated wound healing

Skin injuries across the body continue to disrupt everyday life for millions of patients and result in prolonged hospital stays, infection, and death. Advances in wound healing devices have improved clinical practice but have mainly focused on treating macroscale healing versus underlying microscale pathophysiology. Consensus is lacking on optimal treatment strategies using a spectrum of wound healing products, which has motivated the design of new therapies. We summarize advances in the development of novel drug, biologic products, and biomaterial therapies for wound healing for marketed therapies and those in clinical trials. We also share perspectives for successful and accelerated translation of novel integrated therapies for wound healing.

Recent Advances in Magnetic Polymer Composites for BioMEMS: A Review

The objective of this review is to investigate the potential of functionalized magnetic polymer composites for use in electromagnetic micro-electro-mechanical systems (MEMS) for biomedical applications. The properties that make magnetic polymer composites particularly interesting for application in the biomedical field are their biocompatibility, their adjustable mechanical, chemical, and magnetic properties, as well as their manufacturing versatility, e.g., by 3D printing or by integration in cleanroom microfabrication processes, which makes them accessible for large-scale production to reach the general public. The review first examines recent advancements in magnetic polymer composites that possess unique features such as self-healing capabilities, shape-memory, and biodegradability. This analysis includes an exploration of the materials and fabrication processes involved in the production of these composites, as well as their potential applications. Subsequently, the review focuses on electromagnetic MEMS for biomedical applications (bioMEMS), including microactuators, micropumps, miniaturized drug delivery systems, microvalves, micromixers, and sensors. The analysis encompasses an examination of the materials and manufacturing processes involved and the specific fields of application for each of these biomedical MEMS devices. Finally, the review discusses missed opportunities and possible synergies in the development of next-generation composite materials and bioMEMS sensors and actuators based on magnetic polymer composites.

A propitious role of marine sourced polysaccharides: Drug delivery and biomedical applications

Numerous compounds, with extensive applications in biomedical and biotechnological fields, are present in the oceans, which serve as a prime renewable source of natural substances, further promoting the development of novel medical systems and devices. Polysaccharides are present in the marine ecosystem in abundance, promoting minimal extraction costs, in addition to their solubility in extraction media, and an aqueous solvent, along with their interactions with biological compounds. Certain algae-derived polysaccharides include fucoidan, alginate, and carrageenan, while animal-derived polysaccharides comprise hyaluronan, chitosan and many others. Furthermore, these compounds can be modified to facilitate their processing into multiple shapes and sizes, as well as exhibit response dependence to external conditions like temperature and pH. All these properties have promoted the use of these biomaterials as raw materials for the development of drug delivery carrier systems (hydrogels, particles, capsules). The present review enlightens marine polysaccharides providing its sources, structures, biological properties, and its biomedical applications. In addition to this, their role as nanomaterials is also portrayed by the authors, along with the methods employed to develop them and associated biological and physicochemical properties designed to develop suitable drug delivery systems.

Physical Characteristics and Biocompatibility of 3D-Printed Polylactic-Co-Glycolic Acid Membranes Used for Guided Bone Regeneration

Bioresorbable polymeric membranes for guided bone regeneration (GBR) were fabricated using the three-dimensional printing technique. Membranes made of polylactic-co-glycolic acid (PLGA), which consist of lactic acid (LA) and glycolic acid in ratios of 10:90 (group A) and 70:30 (group B), were compared. Their physical characteristics including architecture, surface wettability, mechanical properties, and degradability were compared in vitro, and their biocompatibilities were compared in vitro and in vivo. The results demonstrated that the membranes of group B had mechanical strength and could support the proliferation of fibroblasts and osteoblasts significantly better than those of group A (p < 0.05). The degradation rate in Group B was significantly lower than that in Group A, but they significantly produced less acidic environment (p < 0.05). In vivo, the membranes of group B were compared with the commercially available collagen membranes (group C). The amount of newly formed bone of rat's calvarial defects covered with the membranes of group C was stable after week 2, whereas that of group B increased over time. At week 8, the new bone volumes in group B were greater than those in group C (p > 0.05). In conclusion, the physical and biological properties of the PLGA membrane (LA:GA, 70:30) were suitable for GBR.

Extraction, Modification and Biomedical Application of Agarose Hydrogels: A Review

Numerous compounds present in the ocean are contributing to the development of the biomedical field. Agarose, a polysaccharide derived from marine red algae, plays a vital role in biomedical applications because of its reversible temperature-sensitive gelling behavior, excellent mechanical properties, and high biological activity. Natural agarose hydrogel has a single structural composition that prevents it from adapting to complex biological environments. Therefore, agarose can be developed into different forms through physical, biological, and chemical modifications, enabling it to perform optimally in different environments. Agarose biomaterials are being increasingly used for isolation, purification, drug delivery, and tissue engineering, but most are still far from clinical approval. This review classifies and discusses the preparation, modification, and biomedical applications of agarose, focusing on its applications in isolation and purification, wound dressings, drug delivery, tissue engineering, and 3D printing. In addition, it attempts to address the opportunities and challenges associated with the future development of agarose-based biomaterials in the biomedical field. It should help to rationalize the selection of the most suitable functionalized agarose hydrogels for specific applications in the biomedical industry.

Diversity in Cell Morphology, Composition, and Function among Adipose Depots in River Buffaloes

Fat deposition is a significant economic trait in livestock animals. Adipose tissues (ATs) developed in subcutaneous and visceral depots are considered waste whereas those within muscle are highly valued. In river buffaloes, lipogenesis is highly active in subcutaneous (especially in the sternum subcutaneous) and visceral depots but not in muscle tissue. Revealing the features and functions of ATs in different depots is significant for the regulation of their development. Here, we characterize the cell size, composition, and function of six AT depots in river buffaloes. Our data support that the subcutaneous AT depots have a larger cell size than visceral AT depots, and the subcutaneous AT depots, especially the sternum subcutaneous AT, are mainly associated with the extracellular matrix whereas the visceral AT depots are mainly associated with immunity. We found that sternum subcutaneous AT is significantly different from ATs in other depots, due to the high unsaturated fatty acid content and the significant association with metabolic protection. The perirenal AT is more active in FA oxidation for energy supply. In addition, the expression of HOX paralogs supports the variable origins of ATs in different depots, indicating that the development of ATs in different depots is mediated by their progenitor cells. The present study enhances our understanding of the cellular and molecular features, metabolism, and origin of AT depots in buffaloes, which is significant for the regulation of fat deposition and provides new insights into the features of AT depots in multiple discrete locations.

Silk fibroin carriers with sustained release capacity for treating neurological diseases

Neurological diseases such as traumatic brain injury, cerebral ischemia, Parkinson's, and Alzheimer's disease usually occur in the central and peripheral nervous system and result in nervous dysfunction, such as cognitive impairment and motor dysfunction. Long-term clinical intervention is necessary for neurological diseases where neural stem cell transplantation has made substantial progress. However, many risks remain for cell therapy, such as puncture bleeding, postoperative infection, low transplantation success rate, and tumor formation. Sustained drug delivery, which aims to maintain the desired steady-state drug concentrations in plasma or local injection sites, is considered as a feasible option to help overcome side effects and improve the therapeutic efficiency of drugs on neurological diseases. Natural polymers such as silk fibroin have excellent biocompatibility, which can be prepared for various end-use material formats, such as microsphere, gel, coating/film, scaffold/conduit, microneedle, and enables the dynamic release of loaded drugs to achieve a desired therapeutic response. Sustained-release drug delivery systems are based on the mechanism of diffusion and degradation by altering the structures of silk fibroin and drugs, factors, and cells, which can induce nerve recovery and restore the function of the nervous system in a slow and persistent manner. Based on these desirable properties of silk fibroin as a carrier with sustained-release capacity, this paper discusses the role of various forms of silk fibroin-based drug delivery materials in treating neurological diseases in recent years.

Prosthetic Joint Infections: Biofilm Formation, Management, and the Potential of Mesoporous Bioactive Glass as a New Treatment Option

Infection of prosthetic joints is one of the biggest challenges to a successful replacement of the joint after a total joint arthroplasty. Such infections are caused by bacterial colonies that are difficult to treat by systemic delivery of antibiotics. Local delivery of antibiotics can prove to be the solution to such a devastating outcome that impacts patients' health and ability to regain function in their joints as well as costs the healthcare system millions of dollars every year. This review will discuss prosthetic joint infections in detail with a focus on the development, management, and diagnosis of the infections. Surgeons often opt to use polymethacrylate cement locally to deliver antibiotics; however, due to the rapid release of antibiotics, non-biodegradability, and high chance of reinfection, the search for alternatives is in high demand. One of the most researched alternatives to current treatments is the use of biodegradable and highly compatible bioactive glass. The novelty of this review lies in its focus on mesoporous bioactive glass as a potential alternative to current treatments for prosthetic joint infection. Mesoporous bioactive glass is the focus of this review because it has a higher capacity to deliver biomolecules, stimulate bone growth, and treat infections after prosthetic joint replacement surgeries. The review also examines different synthesis methods, compositions, and properties of mesoporous bioactive glass, highlighting its potential as a biomaterial for the treatment of joint infections.

The Role of Extracellular Matrix in Wound Healing

BACKGROUND

Extracellular matrix communicates with surrounding cells to maintain skin homeostasis and modulate multiple cellular processes including wound healing.

OBJECTIVE

To elucidate the dynamic composition and potential roles of extracellular matrix in normal skin, wound healing process, and abnormal skin scarring.

MATERIALS AND METHODS

Literature review was performed to identify relevant publications pertaining to the extracellular matrix deposition in normal skin and wound healing process, as well as in abnormal scars.

RESULTS

A summary of the matrix components in normal skin is presented. Their primary roles in hemostasis, inflammation, proliferation, and remodeling phases of wound healing are briefly discussed. Identification of novel extracellular matrix in keloids is also provided.

CONCLUSION

Abnormal scarring remains a challenging condition with unmet satisfactory treatments. Illumination of extracellular matrix composition and functions in wound healing process will allow for the development of targeted therapies in the future.

Injectable Conductive Hydrogels with Tunable Degradability as Novel Implantable Bioelectrodes

Bioelectrodes have been developed to efficiently mediate electrical signals of biological systems as stimulators and recording devices. Recently, conductive hydrogels have garnered great attention as emerging materials for bioelectrode applications because they can permit intimate/conformal contact with living tissues and tissue-like softness. However, administration and control over the in vivo lifetime of bioelectrodes remain challenges. Here, injectable conductive hydrogels (ICHs) with tunable degradability as implantable bioelectrodes are developed. ICHs were constructed via thiol-ene reactions using poly(ethylene glycol)-tetrathiol and thiol-functionalized reduced graphene oxide with either hydrolyzable poly(ethylene glycol)-diacrylate or stable poly(ethylene glycol)-dimaleimide, the resultant hydrogels of which are degradable and nondegradable, respectively. The ICH electrodes had conductivities of 21-22 mS cm^-1 and Young's moduli of 15-17 kPa, and showed excellent cell and tissue compatibility. The hydrolyzable conductive hydrogels disappeared 3 days after in vivo administration, while the stable conductive hydrogels maintained their shapes for up to 7 days. Our proof-of-concept studies reveal that electromyography signals with significantly improved sensitivity from rats could be obtained from the injected ICH electrodes compared to skin electrodes and injected nonconductive hydrogel electrodes. The ICHs, offering convenience in use, controllable degradation and excellent signal transmission, will have great potential to develop various bioelectronics devices.

Hydrophobic Drug Carrier from Polycaprolactone-b-Poly(Ethylene Glycol) Star-Shaped Polymers Hydrogel Blend as Potential for Wound Healing Application

Blending hydrogel with an amphiphilic polymer can increase the hydrophobic drug loading and entrapment efficiency of hydrogel-based formulations. In this study, a hydrogel formulation with star-shaped polycaprolactone-b-poly(ethylene glycol) (PCL-b-PEG) as the hydrophobic drug cargo is produced. The 4-arm and 6-arm star-shaped PCL are synthesized with different molecular weights (5000, 10,000, 15,000 g/mol) via ROP and MPEG as the hydrophilic segment is attached via the Steglich esterification. FTIR and ¹H-NMR analysis showed the presence of all functional groups for homopolymers and copolymers. M_n for all synthesized polymers is close to the theoretical value while GPC spectra showed a monomodal peak with narrow molecular weight distribution (PDI:1.01-1.25). The thermal degradation temperature and crystalline melting point of synthesized polymers increase with the increase in molecular weight and number of arms. All formulations possess high drug loading and entrapment efficiency (>99%) and increase with increasing molecular weight, number of arms, and amount of polymer in the formulations. All formulations showed a sustained drug release pattern with no initial burst, which follows the Korsmeyer-Peppas kinetic model. The polymer hydrogel formulations showed antibacterial activity against E. coli and S. aureus. The hydrogel containing 4-arm PCL_15k-PEG is chosen as the best formulation due to its high drug release, good antimicrobial activity, and morphology.

Porous Biocoatings Based on Diatomite with Incorporated ZrO2 Particles for Biodegradable Magnesium Implants

In the present work, the surface of a biodegradable Mg alloy was modified to create porous diatomite biocoatings using the method of micro-arc oxidation. The coatings were applied at process voltages in the range of 350-500 V. We have studied the influence of the addition of ZrO₂ microparticles on the structure and properties of diatomite-based protective coatings for Mg implants. The structure and properties of the resulting coatings were examined using a number of research methods. It was found that the coatings have a porous structure and contain ZrO₂ particles. The coatings were mostly characterized by pores less than 1 μm in size. However, as the voltage of the MAO process increases, the number of larger pores (5-10 μm in size) also increases. However, the porosity of the coatings varied insignificantly and amounted to 5 ± 1%. It has been revealed that the incorporation of ZrO₂ particles substantially affects the properties of diatomite-based coatings. The adhesive strength of the coatings has increased by approximately 30%, and the corrosion resistance has increased by two orders of magnitude compared to the coatings without zirconia particles.

Comprehensive Characterization of Tissues Derived from Animals at Different Regenerative Stages: A Comparative Analysis between Fetal and Adult Mouse Skin

Tissue regeneration capabilities vary significantly throughout an organism's lifespan. For example, mammals can fully regenerate until they reach specific developmental stages, after which they can only repair the tissue without restoring its original architecture and function. The high regenerative potential of fetal stages has been attributed to various factors, such as stem cells, the immune system, specific growth factors, and the presence of extracellular matrix molecules upon damage. To better understand the local differences between regenerative and reparative tissues, we conducted a comparative analysis of skin derived from mice at regenerative and reparative stages. Our findings show that both types of skin differ in their molecular composition, structure, and functionality. We observed a significant increase in cellular density, nucleic acid content, neutral lipid density, Collagen III, and glycosaminoglycans in regenerative skin compared with reparative skin. Additionally, regenerative skin had significantly higher porosity, metabolic activity, water absorption capacity, and elasticity than reparative skin. Finally, our results also revealed significant differences in lipid distribution, extracellular matrix pore size, and proteoglycans between the two groups. This study provides comprehensive data on the molecular and structural clues that enable full tissue regeneration in fetal stages, which could aid in developing new biomaterials and strategies for tissue engineering and regeneration.

Effect of Oligomers Derived from Biodegradable Polyesters on Eco- and Neurotoxicity

Biodegradable polymers are eco-friendly materials and have attracted attention for use in a sustainable society because they are not accumulated in the environment. Although the characteristics of biodegradable polymers have been assessed well, the effects of their degradation products have not. Herein, we comprehensively evaluated the chemical toxicities of biodegradable polyester, polycaprolactone (PCL), and synthetic oligocaprolactones (OCLs) with different degrees of polymerization. While the PCL did not show any adverse effects on various organisms, high levels of shorter OCLs and the monomer (1 μg/mL for freshwater microorganisms and 1 mg/mL for marine algae and mammalian cells) damaged the tested organisms, including freshwater microorganisms, marine algae, and mammalian cells, which indicated the toxicities of the degradation products under unnaturally high concentrations. These results highlight the need for a further understanding of the effects of the degradation products resulting from biodegradable polyesters to ensure a genuinely sustainable society.

Cone Beam Computed Tomography (CBCT) Evaluation of Alveolar Bone Thickness and Root Angulation in Anterior Maxilla for Planning Immediate Implant Placement

OBJECTIVE

 This retrospective study aimed to measure the labial, palatal, mesial, and distal bone thickness around maxillary central and lateral incisors and canines and height from crest to apex, using cone beam computed tomography (CBCT) images and compare the results based on gender. The second objective of the study was to measure root angulation on CBCT images and its relation with the labial cortical thicknesses.  Material and Methods: After the Institutional Review Board (IRB) approval, a total of 140 CBCT volumes were included in this study according to the set criteria. On each scan, right-side maxillary central, lateral incisors, and canine were selected for the measurements. All the measurements were done at three levels at the alveolar crest (L1), mid-root (L2), and apical region (L3) for each tooth.  Results: The Student's t-test was performed to compare the result of buccal, palatal, mesial, and distal bone thickness, angulation, and height of all subjects. Buccal alveolar bone thickness was minimum at the mid-root region, and the palatal bone thickness was minimum at the crestal region. The mesial bone thickness was minimum at the mid-root level, and distal bone thickness was minimum at the crest level. The available bone height was maximum at the lateral incisor and equal for the central incisor and canine. The canine was the most angulated tooth.

CONCLUSION

 Cone beam computed tomography is a reliable imaging modality to evaluate pre-surgical immediate implant sites and measure alveolar bone thickness. The canine was the most angulated tooth with more buccal alveolar bone thickness.

Incorporation of sodium alginate functionalized halloysite nanofillers into poly (vinyl alcohol) to study mechanical, cyto/heme compatibility and wound healing application

In this study, the Halloysite nanotubes (HNTs) are surface-functionalized with sodium alginate (Sod.alg) and poly (vinyl alcohol) (PVA) were employed to generate nanocomposite films (Sod.alg-rHNT/PVA). These nanocomposite films were made via the solution casting technique. FE-SEM data verified sod.alg-rHNT dispersion into the PVA matrix. The modifications were confirmed from FTIR, TGA and PXRD techniques. In the mechanical studies of synthesized nanocomposite films, the films showed a considerable increase in the tensile strength and Young's modulus values. The nanocomposite film's ability to induce cell proliferation and migration was investigated using murine fibroblast (NIH3T3) cells. The films increased cellular proliferation (128 ± 1.07 %) compared to the neat PVA. Cell adhesion tests showed cytocompliant films. In the scratch assay, the 5 wt% film elicited wound closure at a faster rate (91.53 ± 1.04 %). Films were compatible with human blood cells. Therefore the prepared nanocomposite films can be used as promising wound healers after pre-clinical and clinical testing.

Extracorporeal Shock Wave Therapy as a Helpful Method for Rapid Osseointegration of Dental Implants: Animal Study

The aim of this study was to assess the multi-phasic use of extracorporeal shock wave therapy (ESWT) as an adjuvant treatment to accelerate the osseointegration of titanium dental implants. Initially, twelve titanium mini-screws were inserted in femur bones of six New Zealand rabbits in three groups; the one-time treated group, the three-time treated group, and the control group (without ESWT). Then, 1800 focused shockwaves with an energy flux density of 0.3 mJ/mm2 in every phase were used. Fourteen days after the last phase of ESWT, the animals were sacrificed to assess the osseointegration of screws via micro-computed tomography scan (micro-CT scan), biomechanical pull-out test, and histopathological analysis. Pull-out and histopathology analysis showed that the ESWT significantly increased bone regeneration and osseointegration around the implants compared to the control group (p < 0.05). Moreover, the pull-out test confirmed that the three-time treated screws needed more force to pull the bone out compared to the other two groups (p < 0.05). The mean bone volume fraction between the control group, the one-time treated group, and the three-time treatment group were not statistically significant (p > 0.05) according to the micro-CT scan results. Based on our results, ESWT can be suggested as a non-invasive and cost-effective adjuvant for osseointegration of dental implants. However, more in vivo studies and clinical trials are needed for validation of this finding.

Efficacy of Hyaluronic Acid in Relieving Post-implantation Pain: A Split-Mouth Randomized Controlled Trial

Background

Many patients suffer from some degree of pain following the surgical procedures of dental implantation. The fear of pain may be one reason for postponing such prosthodontic treatments. Many procedures have been suggested to control post-implantation pain. This trial evaluated the effectiveness of using hyaluronic acid (HA) during dental implantation on patients’ perceived pain during the postsurgical soft-tissue healing period.

Methodology

A split-mouth randomized controlled trial (RCT) was conducted. The trial sample consisted of 22 dental implants in 11 patients (five males and six females). Patients were selected from those attending the Department of Oral Medicine at the Faculty of Dentistry, University of Damascus between February 2021 and May 2022. The implants were performed in similar bone quality and density for each patient as the implants were inserted in the same jaw on both sides to ensure the same physiological conditions. The study sample was divided into two groups. The first group (the experimental group) consisted of 11 implants in which the implant site was drilled, following which HA was placed inside the implant site and on the surrounding bone before the flap was returned and sutured. The second group (the control group) comprised 11 implants following the conventional procedure without applying any material to the implant socket. The main outcome measure was pain perception which was assessed using the visual analog scale (VAS). Patients were asked to record their perceived pain on the first, third, and tenth days. Two-sample t-tests were used to detect significant differences.

Results

There were statistically significant differences in the mean pain intensity between the experimental and control groups on the first, third, and tenth days (p < 0.05). The mean values of perceived pain in the control group were 5.68, 1.72, and 0.56 on the first, third, and tenth days, respectively. In comparison, the mean values of perceived pain in the experimental group were 4.52, 1.14, and 0.18 on the first, third, and tenth days, respectively. The maximum perceived pain in the control group was 7.5 on the first day following implantation, whereas the maximum value recorded in the experimental group was 6.5. At the third assessment time (i.e., 10 days following the surgical intervention), the mean values were in the very mild category of pain intensity.

Conclusions

This study showed that applying HA in the implant cavity and on the surrounding bone effectively reduced pain after dental implant surgery in comparison with the control group. Patients had lower mean pain scores at one, three, and ten days following surgery compared to the conventional method. HA is suggested to be an adjunctive method to control postsurgical pain after dental implantation.

Influence of Surface Characteristics of TiO2 Coatings on the Response of Gingival Cells: A Systematic Review of In Vitro Studies

The soft tissue-implant interface requires the formation of epithelium and connective tissue seal to hinder microbial infiltration and prevent epithelial down growth. Nanoporous titanium dioxide (TiO₂) surface coatings have shown good potential for promoting soft tissue attachment to implant surfaces. However, the impact of their surface properties on the biological response of gingival cells needs further investigation. This systematic review aimed to investigate the cellular behavior of gingival cells on TiO₂-implant abutment coatings based on in vitro studies. The review was performed to answer the question: "How does the surface characteristic of TiO₂ coatings influence the gingival cell response in in vitro studies?". A search in MEDLINE/PubMed and the web of science databases from 1990 to 2022 was performed using keywords. A quality assessment of the studies selected was performed using the SciRAP method. A total of 11 publications were selected from the 289 studies that fulfilled the inclusion criteria. The mean reporting and methodologic quality SciRAP scores were 82.7 ± 6.4/100 and 87 ± 4.2/100, respectively. Within the limitations of this in vitro systematic review, it can be concluded that the TiO₂ coatings with smooth nano-structured surface topography and good wettability improve gingival cell response compared to non-coated surfaces.