Evaluation of Clinical and Radiological Outcomes in the Management of Intracapsular Fracture Neck of Femur in Elderly Treated With Cemented Bipolar Prosthesis

INTRODUCTION

Hip fractures, including femoral neck fractures (FNFs), represent a significant health challenge globally. Fractures of the hip can be categorized as either intracapsular or extracapsular. Among the elderly, FNFs are particularly prevalent and account for approximately half of all hip fractures.

AIM

This study aimed to evaluate the clinical and radiological outcomes of intracapsular FNFs in the elderly treated with cemented bipolar prostheses.  Objectives: This study aims to: (i) assess the clinical outcomes, including pain relief, functional mobility, and patient satisfaction, in elderly individuals with intracapsular FNFs treated with cemented bipolar prosthesis; (ii) examine the radiological outcomes of intracapsular FNFs in the elderly following treatment with cemented bipolar prosthesis, focusing on factors such as implant stability, fracture healing, and any signs of complications.

METHODS

A prospective study included elderly patients (aged 55 and above) with intracapsular FNFs treated with cemented bipolar prostheses. Data were collected using a structured proforma, and outcomes were assessed through clinical and radiological evaluations at regular follow-ups.

RESULTS

The study included 60 participants with a mean age of 65.25 years. Most fractures were subcapital, and the majority of participants did not experience complications after surgery. The average length of the pre-operative hospital stay was 2.35 days, and the post-operative hospital stay was 6.75 days. Functional outcomes, evaluated using the Harris Hip Scoring System, showed varying degrees, with 70% of participants experiencing good outcomes.

CONCLUSION

The management of intracapsular femoral neck fractures in the elderly with cemented bipolar prostheses demonstrated favorable outcomes, including low morbidity, simple operative procedures, and satisfactory early functional results. The study supports the recommendation of cemented bipolar prostheses for femoral neck fractures in individuals over 60, emphasizing their superiority over bipolar hemiarthroplasty. The results contribute valuable insights for treatment decisions in hip fractures, especially considering evolving reimbursement mechanisms and merit-based incentive payments.

Anchorless Onlay Dynamic Anterior Stabilization of the Shoulder Using a Guided Posterior Double Endobutton Fixation

The treatment of shoulder instability in the presence of a subcritical glenoid defect poses challenges, as simple Bankart seems insufficient, and the Latarjet procedure may be excessive. Recently, a dynamic anterior stabilization technique involving anterior transposition of the long head of the biceps (LHB) through a subscapularis split was described for that purpose. Previously published results demonstrated good short-term results, but several technical pitfalls have also been mentioned. We describe an onlay, anchorless, and intra-articular knotless method of fixing the LHB into the anterior glenoid that provides the important stabilizing "sling effect" of the dynamic anterior stabilization while avoiding some of the pitfalls described by other techniques.

Midterm outcomes of primary reverse shoulder arthroplasty: a systematic review of studies with minimum 5-year follow-up

Background

Excellent short-term outcomes after reverse shoulder arthroplasty (RSA) have been reported, but longer term outcomes in the existing literature are sparse and vary widely. The purpose of this study is to systematically assess the existing literature to quantify functional outcomes and complication rates after RSA at a minimum of five years of follow-up.

Methods

A Preferred Reporting Items for Systematic Reviews and Meta-analyses-compliant systematic literature search of the PubMed and Embase databases was undertaken. Studies reporting outcomes after primary RSA for nontrauma-related indications with a minimum of 5-year follow-up were included.

Results

Overall, 20 studies satisfied all inclusion criteria. This represented 1591 shoulders in 1556 patients (32.1% males), with a mean age of 70.2 ± 5.0 years and mean follow-up of 8.8 years, or 106.2 ± 30.1 months (60-243). At final follow-up, the mean reported Constant Murley score was 62.1 ± 5.0 (49.0-83.0). The mean adjusted Constant Murley score was 83.5 ± 12.5 (58-111.9). The mean American Shoulder and Elbow Surgeons score was 81.8 ± 4.6, while the mean subjective shoulder value was 74.6 ± 6.4. Overall, 88% of patients rated their satisfaction as either good or very good. The range of active forward flexion, abduction, external, and internal rotation were respectively, 126° ± 13°, 106° ± 11°, 22° ± 11°, and 6° ± 2°. The overall rate of revision surgery was 4.9% (0%-45.5%). Regarding complications, the rate of prosthetic joint infection was 4.3% (0%-26.7%), shoulder dislocation was 3.7% (0%-20.4%), and acromial fracture was 2.0% (0%-8.8%). At final follow-up, 30.9% of shoulders had some degree of scapular notching.

Conclusion

This systematic review shows that RSA results in high satisfaction rates, good clinical outcomes, as well as modest complication and revision rates at minimum 5-year follow-up.

The comparative efficacy of nerve transfer versus tendon transfer in the management of radial palsy: A systematic review and meta-analysis

Background

There is no clear census as to which operative technique provides better recovery for radial nerve injuries. Therefore, in this systematic review, we examined the functional recovery, patient-reported outcomes, and complications of tendon transfer (TT) and nerve transfer (NT).

Methods

Five electronic databases were searched for studies (>10 cases per study) comparing NT and TT regardless of the study design (observational or experimental). Manual search was also conducted. The quality was assessed by the NIH tool. Outcomes included functional recovery, patient-reported outcomes (DASH score, satisfaction, and inability to return to work), and complications. The prevalence was pooled across studies using STATA software, and then, a subgroup analysis based on the intervention type.

Results

Twenty-one studies (542 patients) were analyzed. Excellent recovery, assessed by the Bincaz scale, was higher in the TT group (29 % vs. 11 %) as well as failure to extend the fingers (49 % vs. 9 %). No significant difference was noted between both groups regarding DASH score (mean difference = -2.76; 95 % CI: -12.66: 6.93). Satisfaction was great in the TT group (89 %) with a limited proportion of patients unable to return to work (7 %). Complications were slightly higher in the TT group (8 % vs. 7 %) while 18 % of patients undergoing TT requiring revision surgery. Radial deviation was encountered in 18 % of patients in the TT group and 0 % in the NT group. The quality was good, fair, and poor in 2, 13, and 6, respectively.

Conclusions

In radial nerve injuries, although tendon transfer may seem to provide better functional motor recovery than nerve transfer, it is associated with a higher rate of failure to extend the finger. Given the large confidence interval, the accuracy of this finding is questioned. However, a great proportion of those patients require revision surgery afterward. Additionally, tendon transfer is associated with a greater complication rate than nerve transfer, particularly radial deviation.

Global mapping of institutional and hospital-based (Level II-IV) arthroplasty registries: a scoping review

PURPOSE

Four joint arthroplasty registries (JARs) levels exist based on the recorded data type. Level I JARs are national registries that record primary data. Hospital or institutional JARs (Level II-IV) document further data (patient-reported outcomes, demographic, radiographic). A worldwide list of Level II-IV JARs must be created to effectively assess and categorize these data.

METHODS

Our study is a systematic scoping review that followed the PRISMA guidelines and included 648 studies. Based on their publications, the study aimed to map the existing Level II-IV JARs worldwide. The secondary aim was to record their lifetime, publications' number and frequency and recognise differences with national JARs.

RESULTS

One hundred five Level II-IV JARs were identified. Forty-eight hospital-based, 45 institutional, and 12 regional JARs. Fifty JARs were found in America, 39 in Europe, nine in Asia, six in Oceania and one in Africa. They have published 485 cohorts, 91 case-series, 49 case-control, nine cross-sectional studies, eight registry protocols and six randomized trials. Most cohort studies were retrospective. Twenty-three per cent of papers studied patient-reported outcomes, 21.45% surgical complications, 13.73% postoperative clinical and 5.25% radiographic outcomes, and 11.88% were survival analyses. Forty-four JARs have published only one paper. Level I JARs primarily publish implant revision risk annual reports, while Level IV JARs collect comprehensive data to conduct retrospective cohort studies.

CONCLUSIONS

This is the first study mapping all Level II-IV JARs worldwide. Most JARs are found in Europe and America, reporting on retrospective cohorts, but only a few report on studies systematically.

Decellularized biological matrices for the repair of rotator cuff lesions: a systematic review of preclinical in vivo studies

Background: Rotator cuff tears (RCTs), resulting from degeneration or trauma of the shoulder tendons, are one of the main causes of shoulder pain. In particular, massive RCTs represent 40% of all injuries, require surgical treatment, and are characterized by poor clinical outcomes and a high rate of failure. In recent years, the use of biological decellularized patches for augmentation procedures has received great interest owing to their excellent self-integration properties, improving healing and, thus, presenting an innovative therapeutic option. However, the findings from clinical studies have emerged with conflicting viewpoints regarding the benefits of this procedure, as an excessive tension load might compromise the integrity of the tendon-to-bone connection when the patch exhibits low elasticity or insufficient strength. This could prevent the healing process, leading to unpredictable results in clinical practice. Methods: This systematic review was conducted following Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines across three databases (PubMed, Scopus, and Web of Knowledge) to underline the results obtained in preclinical studies involving animal models of RCT surgeries that utilized the biological decellularized matrix augmentation technique in the last 5 years. Results: Thirteen articles were included after the screening, and the SYRCLE tools were applied to assess the risk of bias in in vivo studies. Open-surgery techniques were conducted to create tendon defects or detachment in different animal models: rat (31%), rabbit (46%), dog (15%), and sheep (8%). Patches decellularized with non-standardized protocols were used in 77% of studies, while commercially available matrices were used in 15%. Of the studies, 31% used allogenic patches, 61% used xenogenic patches, and 8% utilized both xenogenic and autologous patches. Conclusion: Overall, this review provides a comprehensive overview of the use of acellular patches and their effective therapeutic potential in rotator cuff (RC) repair at the preclinical level with the aim of expanding the strategies and matrices available for surgeons. Systematic review registration: https://www.crd.york.ac.uk/prospero/, identifier CRD42023468716.

Navigating the Therapeutic Landscape: A Comprehensive Review of Platelet-Rich Plasma and Bone Marrow Aspirate Concentrate in Knee Osteoarthritis

This comprehensive review provides an in-depth analysis of platelet-rich plasma (PRP) and bone marrow aspirate concentrate (BMAC) as potential treatments for knee osteoarthritis. It explores their mechanisms of action, clinical efficacy, safety considerations, and the importance of personalised treatment approaches. The review highlights promising findings regarding the ability of PRP and BMAC to alleviate symptoms, improve joint function, and potentially slow disease progression. It emphasises the need for further research into long-term outcomes, direct comparative studies, protocol standardisation, biomarker identification, and cost-effectiveness assessments to enhance clinical practice. While the review does not directly compare PRP and BMAC, it provides valuable insights into their respective roles in knee osteoarthritis management. The review aims to contribute to evidence-based advancements in regenerative therapies for knee osteoarthritis by addressing critical research priorities and refining treatment strategies.

Isolated Primary Latarjet Procedures for Anterior Shoulder Instability Results in High Rates of Graft Resorption and Glenohumeral Degenerative Changes With Low Rates of Failure at a Minimum 2-Year Follow-Up: A Systematic Review

PURPOSE

To evaluate the incidence of postoperative complications after an isolated primary Latarjet procedure for anterior shoulder instability at a minimum 2-year follow-up.

METHODS

A systematic review was performed in accordance with 2020 PRISMA guidelines. EMBASE, Scopus, and PubMed databases were queried from database inception through September 2022. The literature search was limited to human clinical studies reporting on postoperative complications and adverse events after a primary Latarjet procedure with a minimum 2-year follow-up. Risk of bias was measured using the Newcastle-Ottawa Scale.

RESULTS

Twenty-two studies, consisting of 1,797 patients (n = 1,816 shoulders), with a mean age of 24 years were identified. The overall postoperative complication rate ranged from 0% to 25.7%, with the most common complication being persistent shoulder pain (range: 0%-25.7%). Radiological changes included graft resorption (range: 7.5%-100%) and glenohumeral degenerative changes (range: 0%-52.5%). Recurrent instability following surgery was documented in 0% to 35% of shoulders, while the incidence of bone block fractures ranged from 0% to 6% of cases. Postoperative nonunion, infection, and hematomas had a reported incidence rate ranging from 0% to 16.7%, 0% to 2.6%, and 0% to 4.4%, respectively. Overall, 0% to 7.5% of surgeries were reported failures, and 0% to 11.1% of shoulders required reoperation, with a revision rate ranging from 0% to 7.7%.

CONCLUSIONS

The incidence of complications following the primary Latarjet procedure for shoulder instability was variable, ranging from 0% to 25.7%. High rates of graft resorption, degenerative changes, and nonunion were present while failure and revision rates remained low at a minimum 2-year follow-up.

LEVEL OF EVIDENCE

Level III, systematic review of Level I-III studies.

Current Evidence Regarding Shoulder Instability in the Paediatric and Adolescent Population

Paediatric and adolescent shoulder instability is caused by a unique combination of traumatic factors, ligamentous laxity, and pattern of muscle contractility. The multifactorial nature of its aetiology makes interpretation of the literature difficult as nomenclature is also highly variable. The purpose of this review is to summarize the existing literature and shed light on the nuances of paediatric and adolescent shoulder instability. The epidemiology, clinical features, imaging, and management of all forms of paediatric shoulder instability are presented. The main findings of this review are that structural abnormalities following a dislocation are uncommon in pre-pubertal paediatric patients. Young post-pubertal adolescents are at the highest risk of failure of non-operative management in the setting of traumatic instability with structural abnormality, and early stabilisation should be considered for these patients. Remplissage and the Latarjet procedure are safe treatment options for adolescents at high risk of recurrence, but the side-effect profile should be carefully considered. Patients who suffer from instability due to generalized ligamentous laxity benefit from a structured, long-term physiotherapy regimen, with surgery in the form of arthroscopic plication as a viable last resort. Those who suffer from a predominantly muscle patterning pathology do not benefit from surgery and require focus on regaining neuromuscular control.

Regenerative therapies for femoral head necrosis in the past two decades: a systematic review and network meta-analysis

BACKGROUND

Regenerative techniques combined with core decompression (CD) are commonly used to treat osteonecrosis of the femoral head (ONFH). However, no consensus exists on regeneration therapy combined with CD that performs optimally. Therefore, we evaluated six regenerative therapies combined with CD treatment using a Bayesian network meta-analysis (NMA).

METHODS

We searched PubMed, Embase, Cochrane Library, and Web of Science databases. Six common regeneration techniques were categorized into the following groups with CD as the control group: (1) autologous bone graft (ABG), (2) autologous bone graft combined with bone marrow aspirate concentrate (ABG + BMAC), (3) bone marrow aspirate concentrate (BMAC), (4) free vascular autologous bone graft (FVBG), (5) expanded mesenchymal stem cells (MSCs), and (6) platelet-rich plasma (PRP). The conversion rate to total hip arthroplasty (THA) and progression rate to femoral head necrosis were compared among the six treatments.

RESULT

A total of 17 literature were included in this study. In the NMA, two of the six treatment strategies demonstrated higher response in preventing the progression of ONFH than CD: MSCs (odds ratio [OR]: 0.098, 95% confidence interval [CI]: 0.0087-0.87) and BMAC (OR: 0.27, 95% CI: 0.073-0.73). Additionally, two of the six treatment strategies were effective techniques in preventing the conversion of ONFH to THA: MSCs (OR: 0.062, 95% CI: 0.0038-0.40) and BMAC (OR: 0.32, 95% CI: 0.1-0.074). No significant difference was found among FVBG, PRP, ABG + BMAC, ABG, and CD in preventing ONFH progression and conversion to THA (P > 0.05).

CONCLUSIONS

Our NMA found that MSCs and BMAC were effective in preventing ONFH progression and conversion to THA among the six regenerative therapies. According to the surface under the cumulative ranking value, MSCs ranked first, followed by BMAC. Additionally, based on our NMA results, MSCs and BMAC following CD may be necessary to prevent ONFH progression and conversion to THA. Therefore, these findings provide evidence for the use of regenerative therapy for ONFH.

Effect of lower limb alignment on outcome after lateral unicompartmental knee arthroplasty: a retrospective study

PURPOSE

The objective of this study was to investigate the correlation between lower limb alignment and patient outcomes after lateral unicompartmental knee arthroplasty (LUKA).

METHODS

In this retrospective study, the information of 51 patients who underwent lateral UKA was collected after an average of 27months of follow-up (13 to 60 months). Evaluation indicators include the AKS and WOMAC score. The Kellgren-Lawrence grade is used to evaluate the severity of osteoarthritis, while the hip-knee-ankle (HKA) angle is utilized to measure the valgus angle of lower limb alignment.

RESULT

Patients with postoperative valgus (≥ 3°) alignment had the best outcomes, while those with varus (≤-3°) alignment had the worst outcomes (p < 0.001). Furthermore, it was noted that patients with preoperative mild valgus (≤ 4°) alignment had worse postoperative outcomes than those with severe valgus (≥ 7°) alignment (p < 0.05). The study also revealed a positive correlation between postoperative valgus and WOMAC scores (p < 0.001), whereas a negative correlation was observed between the change in valgus angle and WOMAC scores (p = 0.005).

CONCLUSION

During follow-ups, we found that lower limb alignment seems to be an independent predictor of postoperative outcomes. It is recommended that more than 3° of valgus alignment should be maintained after LUKA. Surgeons performing lateral UKA should be cautious of overcorrecting alignment, particularly in patients with preoperative mild valgus alignment.

Compressed sensing magnetic resonance imaging (CS-MRI) diagnosis of rotator cuff tears

OBJECTIVE

The present prospective study was performed to evaluate the diagnostic efficiency of compressed sensing magnetic resonance imaging (CS-MRI) for rotator cuff tears.

METHODS

Between December 1, 2021 and April 1, 2022, 62 patients with suspected rotator cuff tears were admitted to Affiliated Hospital of Jinggangshan University and received CS-MRI and arthroscopy to determine the diagnosis and the disease type of tears. Their medical data were obtained and analyzed to evaluate the clinical feasibility of CS-MRI in diagnosing rotator cuff tears.

RESULTS

Of the 62 cases of suspected rotator cuff tears, 45 were confirmed by arthroscopy, including 31 cases of total tears and 14 partial tears. Using arthroscopic findings as the gold standard for the diagnosis of rotator cuff tears, the sensitivity of clinical signs to diagnose rotator cuff tears was 66.67%, the specificity was 70.59%, and the accuracy was 67.74%, while the sensitivity of CS-MRI in diagnosing rotator cuff tears was 84.44%, the specificity was 88.24%, and the accuracy was 81.54%. The accuracy of CS-MRI was significantly higher than that of clinical signs as determined by chi-square test within groups (P=0.019).

CONCLUSION

CS-MRI provides high resolution for muscles, tendons, and soft tissues, significantly contributing to the diagnosis of soft tissue injuries. Although there were no significant differences in the sensitivity and specificity of CS-MRI for the clinical diagnosis of rotator cuff tears compared to the clinical signs, CS-MRI significantly improved the diagnostic accuracy.

Early-Staged Carotid Artery Stenting Prior to Coronary Artery Bypass Grafting: Analysis of the Early and Mid-Term Results in Comparison with a Consecutive Cohort of Isolated Coronary Artery Surgery Patients

AIM

The aim of the present study was to analyze retrospectively the results of patients who underwent early-staged, i.e., within 24-48 h, carotid artery stenting (e-s CAS) before coronary artery bypass grafting (CABG).

METHODS

Between December 2014 and December 2022, 1046 consecutive patients underwent CABG; 31 of these patients (3%) were subjected to e-s CAS prior to CABG (e-s CAS + CABG group). Preoperative and intraoperative variables and early and mid-term results of the e-s CAS + CABG group were compared with those of patients who underwent isolated CABG (CABG group).

RESULTS

As compared with the CABG group, the e-s CAS + CABG group showed a worse clinical risk profile due to higher Euroscore-2 values and incidence of obstructive pulmonary disease and bilateral carotid artery and peripheral artery diseases (p < 0.05, for all comparisons). The combined end point of operative mortality, periprocedural myocardial infarction, and stroke was 3.2% (0%/0%/3.2%) in the e-s CAS + CABG group vs. 5.9% (2.2%/2.8%/0.9%) in the CABG group (p > 0.5, for all measurements). At 5 years, actuarial survival was 74% ± 16% in the e-s CAS + CABG group vs. 93% ± 4.0% in the CABG group, freedom from cardiac death was 100% vs. 98% ± 1.0% (p = 0.6), and freedom from MACCEs was 85% ± 15% vs. 97% ± 2.5% (p > 0.1, for all comparisons). Independent predictors of all-causes death were advanced age at the operation (p < 0.0001), a lower value for left ventricular ejection fraction (p = 0.05), and a high Euroscore-2 (p = 0.04).

CONCLUSIONS

CABG preceded by e-s CAS appears to be associated with satisfactory early outcomes while limiting the risk of myocardial infarction to a very short time interval between the two procedures. Freedom from late all-causes death, cardiac death, and MACCEs were comparable and equally satisfactory, underscoring the positive protective effects of CAS and CABG on the carotid and coronary territories over time.

Risk factors for symptomatic rotator cuff tears: a retrospective case-control study

Background

The incidence and diagnostic rate of rotator cuff tears (RCTs) have increased significantly. The purpose of this study was to investigate and analyze the risk factors for symptomatic RCTs to provide a basis for their prevention and treatment.

Methods

We retrospectively analyzed the relevant clinical indicators of 193 randomized clinical trial (RCT) patients and 161 non-RCT patients hospitalized with shoulder pain as the main complaint from January 1, 2017, to August 31, 2021. Univariate analysis and multivariate logistic regression analysis were used to analyze the differences in potential risk factors between the two groups.

Results

Univariate analysis revealed that age (p < 0.001), body mass index (BMI) (p = 0.036), hypertension (p < 0.001), coronary heart disease (p = 0.028), history of shoulder trauma (p < 0.001), hyperlipidemia (p = 0.025), type III acromion (p = 0.012) and critical shoulder angle (CSA) (p < 0.001) increased the risk of RCTs. Multivariate logistic regression analysis revealed that age ≥ 60 years (OR = 2.61, 95% CI = 1.23 to 5.12), CSA ≥ 35° (OR = 4.24, 95% CI = 1.60 to 11.22), hypertension (OR = 2.34, 95% CI = 1.33 to 4.11) and history of shoulder trauma (OR = 5.20, 95% CI = 2.87 to 9.45) were independent risk factors for symptomatic RCTs.

Conclusion

The results of this study showed that age ≥ 60 years, CSA ≥35°, hypertension and history of shoulder trauma are independent risk factors for symptomatic RCTs and can provide directions for further development of prevention and treatment strategies. Future studies need to clarify the mechanism underlying the association between these risk factors and symptomatic RCTs.

Validation of Temperature Sensors to Monitor Thermoplastic Splint Wear in Hand Surgery Patients

BACKGROUND

The aim of this study was to validate the use of temperature sensors to accurately measure thermoplastic volar forearm splint wear in a healthy cohort of volunteers using 5- and 15-minute temperature measurement intervals.

METHODS

A prospective diagnostic study was performed to evaluate the diagnostic accuracy of temperature sensors in monitoring splint wear in 8 healthy volunteers between December 2022 and June 2023. Temperature sensors were molded into thermoplastic volar forearm splints. Volunteers who were familiar with the study aims were asked to keep an exact log of the time spent wearing the splint ("actual wear time"). Sensors recorded temperatures every 5 or 15 minutes, and separate algorithms were developed to determine the sensor-detected wear time compared with the actual wear time as the gold standard. The algorithms were then externally validated with the total population.

RESULTS

The 5-minute and 15-minute algorithms demonstrated excellent sensitivity (99.1% vs 96.6%), specificity (99.9% vs 99.9%), positive (99.4% vs 99.5%) and negative (99.9% vs 99.3%) predictive value, and diagnostic accuracy (99.8% vs 99.3%), respectively. The 5-minute algorithm recorded 99.5% of the total splint hours, whereas the 15-minute algorithm recorded 96.1%. There was no significant difference between the actual time per wear session (5.4 ± 2.7 hours) and the time estimated by the 5-minute algorithm (5.4 ± 2.6 hours; P = .40), but there was a significant difference for the 15-minute algorithm (5.2 ± 2.6 hours; P < .001).

CONCLUSION

Temperature sensors can be used to accurately monitor thermoplastic volar forearm splint wear.

LEVEL OF EVIDENCE

Diagnostic II.

Bone reconstruction with modified Masquelet technique in open distal femoral fractures: a case series

BACKGROUND

Large bone defects require complex treatment, multidisciplinary resources, and expert input, with surgical procedures ranging from reconstruction and salvage to amputation. The aim of this study was to provide the results of a case series of open comminuted intra-articular distal femoral fractures with significant bone loss that were managed by early fixation using anatomical plates and a modified Masquelet technique with the addition of surgical propylene mesh.

METHODS

This retrospective study included all patients referred to our institution with OTA/AO C3 distal femur open fractures and meta-diaphyseal large bone loss between April 2019 and February 2021. We treated the fractures with irrigation and debridement, acute primary screw and plate fixation in the second look operation, and Masquelet method using shell-shaped antibiotic beads supplemented by propylene surgical mesh to keep the cements in place. The second step of the procedure was conducted six to eight weeks later with bone grafting and mesh augmentation to contain bone grafts. Surprisingly, hard callus formation was observed in all patients at the time of the second stage of Masquelet procedure.

RESULTS

All five patients' articular and meta-diaphyseal fractures with bone loss healed without major complications. The average union time was 159 days. The mean knee range of motion was 5-95 degrees. The average Lower Extremity Functional Score (LEFS) was 49 out of 80.

CONCLUSIONS

Combination of early plate fixation and the modified Masquelet technique with polypropylene mesh is an effective method for managing large bone defects in open intra-articular distal femoral fractures with bone loss, resulting in shorter union time possibly associated with the callus formation process. This technique may also be applicable to the management of other similar fractures specially in low-income and developing areas.

Fixation of femoral neck fracture with femoral neck system: a retrospective cohort study of 43 patients

BACKGROUNDS

This study aimed to analyze the clinical outcomes of femoral neck fractures (FNF) in patients treated with a femoral neck system (FNS, DePuy Synthes), which is a recently introduced device.

METHODS

This retrospective cohort study of 43 patients who underwent osteosynthesis using FNS for FNF between July 2019 and June 2021 with a minimum follow-up of 6 months. The researchers examined the patients' demographic factors and radiologically evaluated the fracture type and fixation status, bone union, and postoperative complications.

RESULTS

Of 43 patients, 25 were female, and the patients' mean age and body mass index were 62.1 years and 22.5 kg/m2, respectively. According to the Association of Osteosynthesis/Orthopaedic Trauma Association (AO/OTA) classification, the most common fracture types were 31B1.1 and B1.2 (13 cases each), followed by B2.3, B2.1, and B2.2 (seven, five, and four cases, respectively). Radiological bone union was confirmed in 39 patients (90.7%), and the mean time to union was 3.6 months. Two cases of nonunion, one case of lag screw cut-out, and one case of osteonecrosis were confirmed; all four cases later underwent arthroplasty. The mean time to reoperation was 4.5 months. Meanwhile, five patients underwent implant removal after the bone union, and distal locking screw stripping was noted in three patients. All three patients required metal plate cutting to remove the implants.

CONCLUSIONS

Osteosynthesis of FNF using the newly introduced FNS showed favorable clinical outcomes and no specific hardware-related complications were reported during the follow-up. However, attention must be paid to the issue regarding distal locking screw failure during hardware removal.

Comparison of short-term clinical outcomes and radiographic changes in Grammont reverse shoulder arthroplasty between the French and Japanese populations: A propensity score-matched analysis

BACKGROUND

Although Grammont-style reverse total shoulder arthroplasty (RSA) showed excellent clinical results in Europe, its utility for Asian populations remains unclear. This study aimed to compare the French and Japanese populations in terms of range of motion (ROM), functional outcomes, and scapular notching rates in patients who underwent standard Grammont-style RSA. We hypothesized that RSA for the Japanese population may not provide as good ROM and functional results at the final follow-up as that for the French population.

METHODS

A total of 25 Japanese patients undergoing RSA were propensity score matched to 25 French patients undergoing RSA. The patients were matched for four different covariates using a propensity score analysis. The minimum follow-up period was 2 years. We investigated differences between the populations with respect to body size and shoulder joint ROM and Constant score (CS) measured preoperatively and at the final follow-up. Scapular notching was examined using radiographs at the final follow-up.

RESULTS

The average height and weight of the French and Japanese patients were 164 cm and 70 kg and 152 cm and 56 kg, respectively. Anterior elevation (AE), external rotation (ER) at the side, internal rotation (IR), and CS total changed from 101° to 145°, 17° to 15°, 4.5 points to 5.5 points, and 36 points to 72 points, respectively, in the French population and from 63° to 119°, 8.5° to 13°, 4.6 points to 4 points, and 28 points to 58 points, respectively, in the Japanese population. AE improved in both the groups; ER and IR remained unchanged before and after surgery. The frequency of scapular notching (>grade 1) was higher in the Japanese population (56%) than in the French population (20%) (p = 0.019).

CONCLUSIONS

Grammont-style RSA improved AE and CS in both the populations, but AE and CS were significantly higher in the French population than in the Japanese population at the final follow-up. Scapular notching frequently occurs in the Japanese population.

Arthroscopic Double-Pulley Suture-Bridge Repair of Supraspinatus Tendon Tear

At present, the suture bridge is a widely used surgical pattern in the treatment of supraspinatus tendon tear, but the shortcomings of a suture bridge, including expensive lateral-row anchor and increased type 2 retear rate, is obvious. The double-pulley suture-bridge described in this Technical Note uses a double-loaded suture anchor (medial-row anchor) as lateral-row anchor instead of traditional lateral-row anchor, combined with double-pulley technology forming suture-bridge in treatment of supraspinatus tendon tears. The surgical technique is described in pearls, pitfalls, advantages, and disadvantages.

The Medial Pivot Design in Total Knee Arthroplasty

Medial pivot total knee arthroplasty implants are designed to function in a similar manner to that of the native knee with a relatively fixed medial center of rotation and a less conforming lateral compartment that follows an arcuate path. Medial pivot implants in total knee arthroplasty have increased in popularity with many companies offering medial pivot or retrofitted medial congruent implants, and there are variations between the various medial pivot and medial congruent implants. Existing literature on medial pivot implants have demonstrated high survivorship and patient outcomes. More studies are needed to compare newer medial pivot implants with each other and with retrofitted medial congruent implants.

Biomaterials augmented with filtered bone marrow aspirate for the treatment of talar osteochondral lesions. A comparison of clinical and cellular parameters

BACKGROUND

Biomaterials augmented with Bone Marrow Aspirate Concentrate (BMAC) are becoming increasingly utilized in the cartilage treatment. However, the potential role of cellular parameters in the intraoperatively applied BMAC have yet to be elucidated.

PURPOSE

(A) To evaluate clinical outcomes and safety of a combined single-step approach with scaffolds (fibrin glues, collagen gels, collagen-hydroxyapatite membrane) and filtered Bone Marrow Aspirate (fBMA) for the treatment of osteochondral lesions of the talus (OLTs). (B) To identify significant factors for postoperative improvements, considering cellular parameters as potential predictors.

METHODS

All the patients operated on due to OLTs by the combination above were selected from the hospital registry database (35 pts, years 16-55, and minimally 1 year follow-up). Treatment outcomes were followed clinically with Patient-reported outcome measures (PROMs), and by pursuing serious adverse events (SAE) and graft failures (GF). Cellular parameters of the injected fBMA were determined. Pre- and postoperative PROMs values were compared to evaluate postoperative improvements. Multivariable regression models were applied to identify potential factors (demographics, medical history, joint and lesion characteristics, scaffold type, surgical and cellular parameters) that predict the treatment outcomes.

RESULTS

At the mean follow-up of 32.2 (12.5) months, all Foot and Ankle Outcome Score (FAOS) and European Quality of Life in Five Dimensions Three-Level (EQ-5D-3 L) values improved significantly. 4 (11%) SAE (3 arthrofibrosis, one hardware removal), and 3 (9%) GF occurred. Female gender and concomitant procedures were the main negative predictors for postoperative outcomes. The number of fibroblast colony forming units (CFU-F) or their proportion among total nucleated cells (CFU-F/TNC) were positively correlated with the improvements of some PROMs.

CONCLUSIONS

Scaffolds augmented with fBMA proved as an adequate and safe approach for OLTs treatment. Cellular parameters seem to influence the treatment outcomes, thus further attention should be given to the intraoperatively applied products.

LEVEL OF EVIDENCE

Level IV.

Controversies around hip fracture treatment: clinical evidence versus trends from national registries

PURPOSE

Several controversies in the optimal treatment of femoral neck fractures persist, together with large variations in clinical practice.

METHODS

A narrative literature review covering 4 current controversies in the surgical management of femoral neck fractures (total hip arthroplasty (THA) versus hemiarthroplasty (HA), cemented versus uncemented HA, internal fixation versus arthroplasty, operative versus non-operative) was performed. Available literature was balanced against annual trends in the management of femoral neck fractures from the public domain of several national registries (Sweden, Norway, The Netherlands, Australia and New Zealand).

RESULTS

For most controversies, the literature provides stronger evidence than is reflected by variations encountered in daily practice. Implementation of clinical evidence tends to lag behind and important differences exist between countries.

CONCLUSIONS

Trends of clinical practice from national registries indicate that implementation of available clinical evidence needs to be improved.

The Combined Intraosseous Administration of Orthobiologics Outperformed Isolated Intra-articular Injections in Alleviating Pain and Cartilage Degeneration in a Rat Model of MIA-Induced Knee Osteoarthritis

BACKGROUND

Intra-articular (IA) platelet-rich plasma (PRP) and bone marrow aspirate concentrate (BMAC) injections have shown efficacy and safety in treating osteoarthritis (OA). However, the effectiveness and mechanisms of combined intraosseous (IO) administration of these orthobiologics have yet to be explored.

PURPOSE/HYPOTHESIS

The purpose of this study was to evaluate the effect on pain, cartilage, synovium/infrapatellar fat pad (IFP), and subchondral bone in rat knee OA, comparing isolated IA with combined IA and IO (IA+IO) injections of PRP or BMAC. It was hypothesized that combined injections would be superior to sole IA injections.

STUDY DESIGN

Controlled laboratory study.

METHODS

A total of 48 rats were divided into 6 groups: sham (only joint puncture during OA induction with IA+IO saline injection treatment) and 5 groups with OA induction, control (IA+IO saline injection), PRP (IA PRP+IO saline injection), BMAC IA (IA BMAC+IO saline injection), PRP IA+IO (IA+IO PRP injection), and BMAC IA+IO (IA+IO BMAC injection). OA was induced by IA injection of monosodium iodoacetate (MIA). Rats were administered different orthobiologics according to their grouping 3 weeks after the MIA injection. Pain changes were evaluated using the weightbearing ratio assay at weeks 3, 4, 5, 7, and 9 after OA induction. Rats were euthanized at week 9 for gross, radiological, histological, immunohistochemical, and immunofluorescence assessments of cartilage, synovium, and subchondral bone.

RESULTS

Compared with the control group, all orthobiologics injection groups had reduced joint pain. Compared with IA injection, IA+IO injections provided superior pain relief by suppressing calcitonin gene-related peptide and substance P in both the synovium/IFP and subchondral bone. IA+IO injections slowed the progression of subchondral bone lesions by inhibiting CD31hiEmcnhi vessel formation and excessive osteoclast and osteoblast turnover while preserving subchondral bone microarchitecture, slowing cartilage degeneration. However, IA+IO injections did not outperform isolated IA injections in reducing synovitis and synovium/IFP fibrosis. Compared with PRP, BMAC exhibited superior inhibition of pain-related mediators, but no significant differences were observed in synovitis suppression, infrapatellar fat pad fibrosis, and subchondral bone protection.

CONCLUSION

IA+IO injections of orthobiologics were more effective in relieving pain, slowing cartilage degeneration, and inhibiting abnormal vascularization and remodeling compared with isolated IA injections. BMAC showed superior pain relief in the synovium/IFP and subchondral bone compared with PRP. Further research is needed to optimize PRP and BMAC components for enhanced efficacy in OA management.

CLINICAL RELEVANCE

Our findings contribute to advancing the understanding of pain relief mechanisms and support the endorsement of IO injection of orthobiologics for the treatment of OA and joint pain.

Effect of single-radius design on in vivo kinematics during stair activities after total knee arthroplasty

BACKGROUND

The single-radius design is one of the major total knee arthroplasty (TKA) designs and widely used all over the world. The objective of this study was to compare in vivo kinematics between the anteroposterior (AP) single-radius design with mediolateral (ML) single-radius (Non Restricted Geometry; NRG) and ML dual-radius (Triathlon) during stair activities.

METHODS

A total of 21 knees in 18 patients (NRG group: 10 knees in 7 patients, Triathlon group: 11 knees in 11 patients) with a clinically successful posterior stabilized TKA were examined. Under fluoroscopic surveillance, each patient performed stair ascending and descending motions. In vivo kinematics were analyzed using 2D/3D registration technique. The knee flexion angle, rotation angle, varus-valgus angle, AP translation of the femorotibial contact point for both the medial and lateral sides of the knee, and post-cam engagement were evaluated.

RESULTS

There were no significant differences between the two groups in rotation angle and AP translation at each flexion angle. Examining the varus-valgus angle, the NRG group showed varus position at an early flexion angle during both stair activities.Post-cam engagement was observed in both groups during both stair activities. The mean flexion angle of engagement in the NRG group, the post of which was located anterior to the Triathlon, was larger than that in the Triathlon group during both stair activities.

CONCLUSION

Despite the same AP single-radius TKA, ML single-radius might affect varus motion at an early flexion angle.

Analysis of factors associated with patient-reported outcome (PRO) score completion rate one year after shoulder surgeries

Background

Patient-reported outcome measurements (PROMs) are important metrics for monitoring improvements following shoulder surgery. Despite the easy accessibility of electronic PROM surveys, completion rates vary, and factors predictive of survey completion for patients enrolled in medical survey follow-up after shoulder surgery remain largely unknown. The purpose of this study is to investigate survey completion rates for common shoulder procedures and identify factors predictive of PROM completion at one-year postoperatively. We hypothesize that the response rate to shoulder PROMs may vary by the shoulder procedure type after surgery.

Methods

Patients undergoing total shoulder arthroplasty (TSA), rotator cuff repair (RCR), and instability surgery (Latarjet procedure [LP], and arthroscopic Bankart repair [ABR]) from 2019 to 2021 were prospectively enrolled. Each patient was administered PROM surveys via email preoperatively and at 2-weeks, 6-weeks, 3-months, 6-months, and 12-months following surgery. Demographics and socioeconomic characteristics were collected from our institutional database. The primary outcome studied was survey completion rate by procedure. Multivariable logistic regression was performed to identify factors predictive of completing 12-month follow-up.

Results

A total of 514 (251 TSA, 194 RCR, and 69 instability surgery (35 LP, 34 ABR)) patients with an average age of 58 ± 15 years were included in this study. Overall, the 12-month survey completion rate for all procedures was 57.2%. TSA had the highest completion rate (64.9%), followed by RCR (52.1%), ABR (44.2%), and LP (42.9%). ABR and LP demonstrated more than a 50% drop in survey response at 2 weeks, and the RCR cohort demonstrated an increased attrition in survey response at the 6-month mark. Patients who completed the 12-month follow-up survey were older [61 ± 14 vs. 54 ± 17; P < .001], less frequently self-identified as Hispanic [13% vs. 23%; P = .009], less frequently single [32% vs. 44%; P = .008], and most frequently classified as the American Society of Anesthesiology [ASA] score II [65%, P = .001].

Conclusion

Postoperative PROM survey completion rates vary significantly among commonly performed shoulder procedures during the first year after surgery. Hispanic ethnicity and younger age were all predictive of a lower propensity, and the TSA procedure is predictive of higher odds for PROM survey completion at the 12-month follow-up.

Platelet-Rich Plasma Lysate Enhances the Osteogenic Differentiation of Adipose-Derived Stem Cells

ABSTRACT

Adipose-derived stem cells (ADSCs) have become an accepted source of cells in bone tissue engineering. This study aimed to investigate whether platelet-rich plasma (PRP) lysate can replace traditional fetal bovine serum as a culture medium with the enhanced proliferation and osteogenic potential of ADSCs. We divided the experiment into 5 groups where the ADSCs were cultured in an osteogenic medium containing 2.5%, 5%, 7.5%, and 10% PRP lysate with 10% fetal bovine serum as the control group. The cell proliferation, alkaline phosphatase (ALP) activity, ALP stain, alizarin red stain, osteocalcin (OCN) protein expression, and osteogenic-specific gene expression were analyzed and compared among these groups. The outcome showed that all PRP lysate-treated groups had good ALP stain and ALP activity performance. Better alizarin red stains were found in the 2.5%, 5%, and 7.5% PRP lysate groups. The 2.5% and 5% PRP lysate groups showed superior results in OCN quantitative polymerase chain reaction, whereas the 5% and 7.5% PRP lysate groups showed higher OCN protein expressions. Early RUNX2 (Runt-related transcription factor 2 () genes were the most expressed in the 5% PRP lysate group, followed by the 2.5% PRP lysate group, and then the 7.5% PRP lysate group. Thus, we concluded that 5% PRP lysate seemed to provide the optimal effect on enhancing the osteogenic potential of ADSCs. Platelet-rich plasma lysate-treated ADSCs were considered to be a good cell source for application in treating nonunion or bone defects in the future.

Single-row versus transosseous technique in the arthroscopic treatment of rotator cuff tears: a meta-analysis

PURPOSE

This study aims to compare single-row suture-anchors (SA) versus transosseous arthroscopic (TO) technique in the treatment of patients with rotator cuff tears in terms of clinical structural outcomes at atleast 24 months of follow-up.

METHODS

The systematic review was performed according to "PRISMA guidelines" (Preferred Reporting Items for Systematic Reviews and Meta-analyses), in order to identify all the studies comparing clinical, both subjective and objective, outcomes with 24 months follow-up minimum in patients undergoing arthroscopic RC repair with the SR and TO technique. OVID-MEDLINE®, Cochrane, SCOPUS and PubMed were searched from January 2010 to October 2022 to identify relevant studies, using the following key words, that were combined together to achieve maximum search strategy sensitivity: "Rotator cuff tear" OR "repair" OR "shoulder" OR "reconstruction" OR "suture" OR "arthroscopic" OR "single-row" OR "transosseous".

RESULTS

Six papers were finally analyzed in this meta-analysis. The weighted mean difference on Constant scores and for ASES for studies considering suture-anchors (SA) group showed good outcomes. The weighted mean difference of Constant scores and of ASES for TO (transosseous) group showed good outcomes. The weighted mean difference of CONSTANT for TO versus SA groups showed no differences in the outcomes of SA and TO techniques for the repair of Rotator Cuff Tears at minimum 24 months follow-up.

CONCLUSIONS

The Arthroscopic transosseous rotator cuff repair technique and SA (suture-anchor) technique both lead to significant short-term improvement and satisfactory subjective outcome scores with low complication/failure rates. No differences were found in the final outcome between the two techniques.

Factors Influencing Compliance to Follow-up Visits in Orthopaedic Surgery

BACKGROUND

Orthopaedic procedures require postoperative follow-up to maximize recovery. Missed appointments and noncompliance can result in complications and increased healthcare costs. This study investigates the relationship between patient postoperative visit attendance and the distance traveled to receive care.

MATERIALS AND METHODS

A retrospective review of all surgeries performed by a single orthopaedic surgeon in 2019 at level 1 trauma center in a midsized city serving a largely rural population was completed. We excluded patients who underwent another subsequent procedure. Distance to care and time traveled were determined by the patient's address and the clinic address using Google Maps Application Programming Interface. Other variables that may affect attendance at follow-up visits were also collected. Univariate and multivariate logistic regression was done with purposeful selection.

RESULTS

We identified 518 patients of whom 32 (6%) did not attend their first scheduled follow-up appointment. An additional 47 (10%) did not attend their second follow-up. In total, 79 patients (15%) did not attend one of their appointments. Younger age, male sex, Black or African American race, self-pay, Medicaid insurance, accident insurance, and increased distance were individual predictors of missing an appointment. In the final multivariate logistic regression model, male sex (OR 1.74), Black or African American race (OR 2.78), self-pay (OR 3.12), Medicaid (OR 3.05), and traveling more than 70 miles to clinic (OR 2.02) markedly predicted missing an appointment, while workers' compensation (OR 0.23) predicted attendance.

DISCUSSION

Several nonmodifiable patient factors predict patient noncompliance in attending orthopaedic postoperative visits. When patients are considered at high risk of being lost to follow-up, there may be an opportunity to implement interventions to improve follow-up rate and patient outcomes, minimize patient costs, and maximize profitability for the hospital.

A novel surgical method for treating fractures of the middle third of the clavicle

BACKGROUND

The clavicle is recognized as the bone most vulnerable to fractures. Moreover, approximately 80% of fractures occur in the middle third of the clavicle. Conservative treatment is associated with a higher rate of nonunion, while surgical treatment of fracture via internal fixation may have a variety of postoperative complications. Therefore, to improve patient satisfaction and reduce the complications related to internal fixation techniques, we modified the surgical approach to external fixation.

OBJECTIVE

The purpose of this study was to assess the modified intervention's prospects for clinical application.

METHODS

A total of 36 patients with middle clavicle fractures were treated with screw-rod external fixation between April 2015 and October 2019. We observed the operative time, intraoperative blood loss, length of hospital stay, and fracture healing time. The patients were followed up regularly, and the clinical efficacy of the modified intervention was evaluated. Finally, the patients' shoulder function was assessed based on the disabilities of the arm, shoulder, and hand (DASH) score.

RESULTS

For the screw-rod external fixation, the mean operative time was found to be 48.6 ± 6.8 min, the intraoperative blood loss was 30.6 ± 17.2 mL, the length of hospital stay was 4.5 ± 1.5 days, and the fracture healing time was 2.8 ± 0.4 months. Eventually, all the patients healed well, with the combined "excellent" and "good" rate of shoulder function being assessed to be as high as 94.44%. Furthermore, the DASH scores were all less than 10, with the average score being 4.65 ± 3.34.

CONCLUSIONS

The screw-rod external fixation technique offers the advantages of convenience, reliability, and good aesthetics, suggesting that it could be used as an alternative treatment method for fractures of the middle third of the clavicle.

The Zipknot Technique: A Modified Tension Band Repair Technique for Isolated Supraspinatus Tears

Tension band repair frequently is used for small rotator cuff tears. This Technical Note describes a variation using a single knotless suture anchor but with a specific lark's head knot technique to pass the sutures through the tendon that improves bone-tendon contact and tendon healing while preventing a dog-ear deformity.

Postoperative Functional Analysis of Double Crush Versus Single Peripheral Nerve Decompression: A Retrospective Study

BACKGROUND

Double crush (DC) syndrome patients presenting with C6-7 radiculopathy and median nerve compression in the carpal tunnel report greater nerve irritability and weakness postdecompression than isolated peripheral nerve decompression. We hypothesize that patient-reported outcome is inferior following release at both cervical spine and wrist versus a single site of decompression.

METHODS

Patients that underwent either anterior cervical decompression and fusion (ACDF) for C6-C7 radiculopathy, carpal tunnel release (CTR), or both within 5 years (DC) were identified. A total of 477 patients were analyzed (157 DC, 203 CTR, and 117 ACDF). Post-operative outcome Disabilities of the Arm, Shoulder, and Hand (QuickDASH), Neck Disability Index, and visual analog scale (VAS) scores were collected at an average of 2 years postoperatively.

RESULTS

QuickDASH scores were higher in the DC group versus CTR group (36 vs 22, P < .0002). Postoperative disability in the ACDF group was significantly higher than the DC group (50 vs 36, P < .017). There were no differences between ACDF and DC groups in arm pain intensity, but the CTR group demonstrated significantly greater arm pain intensity than the DC group (5.7 vs 3.6, 10-point scale, P < .01).

CONCLUSIONS

Patients undergoing ACDF and CTR have greater postoperative disability than those undergoing CTR alone, but less postoperative functional disability and pain than ACDF alone, indicating cervical radiculopathy may contribute a greater proportion of long-term disability postoperatively. Additionally, CTR had greater postoperative arm pain than DC patients, potentially indicating high rates of undiagnosed cervical radiculopathy or other sources of arm pain in these patients.

Precontoured dynamic compression plate using patient-specific 3D-printed models in minimally invasive surgical technique for midshaft clavicle fractures

INTRODUCTION

This study introduced a novel approach for the treatment of midshaft clavicle fractures, utilizing patient-specific 3D-printed models for accurate preoperative contouring of dynamic compression plates (DCPs) and an alternative minimally invasive plate osteosynthesis (MIPO) technique with precontoured DCPs through small vertical separated incisions.

PATIENT AND METHODS

Mirror image 3D clavicular models were reproduced from 40 patients with acute displaced midshaft clavicle fractures who underwent MIPO using precontoured DCPs inserted through small, vertical separated incisions. Exclusion criteria included patients with open fractures, pathological fractures, ipsilateral limb injury, skeletal immature patients, and those who had previous clavicle fractures or surgery. Postoperative evaluation was conducted using clinical and radiographic review. The Constant-Murley and American Shoulder and Elbow Surgeons Shoulder Scores were used for clinical evaluations, and the Patient and Observer Scar Assessment Scale was used to assess surgical scars.

RESULTS

The average time to union of all fractures was 12.88 weeks (range, 8-15) without loss of reduction. The patient-specific precontoured DCPs fitted well in all cases, with fracture consolidation and minimal three cortical sides connecting the fracture fragment. No hardware prominence and skin complications occurred, and clinical evaluation showed no existing difference compared with the contralateral sides. The average Constant-Murley and American Shoulder and Elbow Surgeons Shoulder Scores were 96.33 ± 3.66 and 93.26 ± 5.15, respectively. Two patients requested their implant removal, and scar qualities were satisfactory.

CONCLUSIONS

Our study demonstrated that the use of a patient-specific precontoured DCP, in combination with 3D printing technology, provides accurate preoperative planning, effective fracture reduction, and improved postoperative outcomes in displaced midshaft clavicle fractures. The MIPO with a patient-specific precontoured DCP through separated vertical incisions along the Langer's lines appears to be a promising option, regarding appearance, avoiding associated complications, and obviating the need for reoperation. These results suggest that this technique has merit and can be a viable option for the treatment of midshaft clavicle fractures.

Rotator Cuff Tears to Shoulder Instability: The Relationship Between Acromial Morphology and Shoulder Pathology

» The acromion is a well-studied region of the scapula that has demonstrated substantial relationships to various shoulder pathologies.» Abnormal acromial morphology is associated with rotator cuff pathology, and our understanding of this risk factor inspired acromioplasty as an adjunctive treatment for rotator cuff tears.» The acromion is linked closely to shoulder kinematics and biomechanics, as it serves as the origin for the deltoid muscle.» In degenerative shoulder disease, eccentric glenohumeral osteoarthritis has been associated with a higher, flatter acromial roof.» Increasing literature is emerging connecting morphology of the acromion with shoulder instability.

Biomechanical Evaluation of the 2 Different Levels of Coracoid Graft Positions in the Latarjet Procedure for Anterior Shoulder Instability

Background

In the Latarjet procedure, the ideal placement of the coracoid graft in the medial-lateral position is flush with the anterior glenoid rim. However, the ideal position of the graft in the superior-inferior position (sagittal plane) for restoring glenohumeral joint stability is still controversial.

Purpose

To compare coracoid graft clockface positions between the traditional 3 to 5 o'clock and a more inferior (for the right shoulder) 4 to 6 o'clock with regard to glenohumeral joint stability in the Latarjet procedure.

Study Design

Controlled laboratory study.

Methods

A total of 10 fresh-frozen cadaveric shoulders were tested in a dynamic, custom-built robotic shoulder model. Each shoulder was loaded with a 50-N compressive load while an 80-N force was applied in the anteroinferior axes at 90° of abduction and 60° of shoulder external rotation. Four conditions were tested: (1) intact, (2) 6-mm glenoid bone loss (GBL), (3) Latarjet procedure fixed at 3- to 5-o'clock position, and (4) Latarjet procedure fixed at 4- to 6-o'clock position. The stability ratio (SR) and degree of lateral humeral displacement (LHD) were recorded. A 1-factor random-intercepts linear mixed-effects model and Tukey method were used for statistical analysis.

Results

Compared with the intact state (1.77 ± 0.11), the SR was significantly lower after creating a 6-mm GBL (1.14 ± 0.61, P = .009), with no significant difference in SR after Latarjet 3 to 5 o'clock (1.51 ± 0.70, P = .51) or 4 to 6 o'clock (1.55 ± 0.68, P = .52). Compared with the intact state (6.48 ± 2.24 mm), LHD decreased significantly after GBL (3.16 ± 1.56 mm, P < .001) and Latarjet 4 to 6 o'clock (5.48 ± 3.39 mm, P < .001). Displacement decreased significantly after Latarjet 3 to 5 o'clock (4.78 ± 2.50 mm, P = .04) compared with the intact state but not after Latarjet 4 to 6 o'clock (P = .71).

Conclusion

The Latarjet procedure in both coracoid graft positions (3-5 and 4-6 o'clock) restored the SR to the values measured in the intact state. A more inferior graft position (fixed at 4-6 o'clock) may improve shoulder biomechanics, but additional work is needed to establish clinical relevance.

Clinical Relevance

An inferior coracoid graft fixation, the 4- to 6-o'clock position, may benefit in restoring normal shoulder biomechanics after the Latarjet procedure.

Invasive electrical stimulation in the treatment of avascular osteonecrosis of the femoral head - mid-term results

The study aimed to evaluate the outcomes of osteonecrosis of the femoral head (ONFH) in adults after surgical treatment including invasive electromagnetic osteostimulation (E-Stim). Further, the influence of disease stage and several comorbidities on the joint preservation rate should be examined. Sixty patients (66 hip joints) with ONFH were included in this retrospective cross-sectional analysis (mean follow-up: 58 months, 19-110 months). Potential ONFH risk factors and comorbidities (ONFH stage, age, sex, alcohol, smoking, cortisone medication, chemotherapy) were recorded. The influence of specific parameters on the joint preservation rates was evaluated by a multivariate logistic regression analysis. Finally, patients with preserved hip joints underwent an assessment of their last available X-rays. The joint preservation rate depended on the initial ONFH Steinberg stage (I+II: 82.8%, III: 70.8%, ≥ IVa: 38.5%). Initially collapsed ONFH (p ≤ 0.001) and cortisone therapy (p = 0.004) significantly decreased the joint preservation rates. In case of progressed ONFH, the presence of ≥ 2 risk factors resulted in higher THA conversion rates (stage III: OR 18.8; stage ≥IVa: OR 12). In 94% of the available X-rays, the ONFH stage improved or did not progress. No complications could be attributed to the E-Stim device or procedure. The present surgical protocol including minimally invasive E-Stim revealed high joint preservation rates for non-collapsed ONFH after mid-term postoperative follow-up. Especially in progressed ONFH, the-risk profile seems to be crucial and hence, for joint preserving surgery, careful patient selection is recommended.

Double Attack Repair for Massive Rotator Cuff Tears: Superior Capsular Reconstruction Using the Long Head of Biceps Tendon Plus Margin Convergence Repair

Arthroscopic repair of massive retracted rotator cuff tears is very challenging with a high incidence of retears. Many techniques have been described to improve the outcomes of arthroscopic repair. In this technique, a superior capsular reconstruction using the long head of the biceps is combined with margin convergence repair aimed at improving the mechanical strength of the repair. The long head of the biceps is used as a superior capsular reconstruction to stabilize the humeral head and prevent proximal migration. Moreover, margin convergence provides an efficient gap filling between remnants of the supraspinatus and infraspinatus tendons to restore an efficient rotator repair in anatomical, biological, and tension-free fashion.

Patient outcomes and return to play after arthroscopic rotator cuff repair in overhead athletes: a systematic review

BACKGROUND

Rotator cuff tear injuries in overhead athletes are common and may lead to chronic pain and joint disability, impairing sport participation and leading to premature retirement. The improvement of the patient reported outcome measures (PROMs) was evaluated, as were the time and level of return to sport and the rate of complication in overhead athletes who had undergone arthroscopic rotator cuff repair.

METHODS

This systematic review was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses: the 2020 PRISMA statement. In September 2022, the following databases were accessed: Pubmed, Web of Science, Google Scholar and Embase. No time constraints were used for the search. All the clinical trials investigating arthroscopic rotator cuff repair in overhead athletes were accessed.

RESULTS

Data from 20 studies were collected. The mean length of the follow-up was 40 months. All PROMs improved at last follow-up: Kerlan-Jobe Orthopaedic Clinic score (P = 0.02), visual analogue scale (P = 0.003), Constant score (P < 0.0001), University of California Los Angeles Shoulder score (P = 0.006) and American Shoulder and Elbow Surgeons' score (P < 0.0001). Elevation also improved (P = 0.004). No difference was found in external and internal rotation (P = 0.2 and P = 0.3, respectively). In total, 75.4% (522 of 692 of patients) were able to return to play within a mean of 6.4  ±  6.0 months. Of 692 patients, 433 (62.5%) were able to return to sport at pre-injury level. Fourteen out of 138 patients (10.1%) underwent a further reoperation. The overall rate of complications was 7.1% (20 of 280).

CONCLUSION

Arthroscopic reconstruction of the rotator cuff is effective in improving function of the shoulder in overhead athletes, with a rate of return to sport in 75.4% of patients within an average of 6.4 months.

LEVEL OF EVIDENCE

III, systematic review.

TRIAL REGISTRATION

Not applicable.

Comparison of Glenohumeral Bone Morphology Between Patients With Versus Without Anterior Shoulder Instability

Background

The stability of the glenohumeral joint is associated with anatomic characteristics including bony structures and soft tissues.

Purpose

To compare the differences in specific bony glenohumeral geometries between shoulders with anterior shoulder instability (ASI), unaffected contralateral shoulders, and healthy control shoulders.

Study Design

Cross-sectional study; Level of evidence, 3.

Methods

Shoulder computed tomography (CT) scans of 36 patients with ASI and 36 matched healthy controls were retrieved and 3-dimensionally reconstructed. We measured the glenoid radius of curvature (GROC) in the anterior-posterior (AP) and superior-inferior directions, humeral head radius of curvature (HROC) in the AP direction, conformity index, glenoid height, glenoid width, glenoid index, stability angle, glenoid version, and glenoid depth. The differences between the groups were statistically calculated. CT scans of the unaffected contralateral shoulders from 21 of the ASI patients were also collected to identify the consistency of the bony structures in bilateral shoulders.

Results

Patients with ASI had greater GROC in the AP direction (P < .001), HROC in the AP direction (P = .002), glenoid height (P = .005), and glenoid index (P < .001) and smaller conformity index (P < .001), glenoid width (P = .002), stability angle (P < .001), and glenoid depth (P < .001). In addition, the glenoid of the ASI patients was more anteverted compared with that of controls (P = .001). There was no statistical difference in half the measurements between the bilateral shoulder joints in patients with ASI.

Conclusion

In this study, glenohumeral geometric differences were found between ASI patients and healthy control participants. Glenoid curvature and conformity index, based on bilateral comparisons of affected and contralateral shoulders, appear inherent and may predict ASI risk.

Arthroscopic Latarjet procedure: current concepts and surgical techniques

The Latarjet procedure is a surgical procedure that can effectively restore glenohumeral stability, especially in patients with anterior shoulder instability and glenoid bone loss. Many studies have shown comparable clinical outcomes between patients undergoing the arthroscopic Latarjet procedure and those undergoing traditional open methods or other glenohumeral joint stabilization procedures. However, the arthroscopic Latarjet procedure is a challenging technique due to the unfamiliar portal placements, proximity of neurovascular structures, and serious postoperative complications. The arthroscopic Latarjet procedure has not yet been widely applied, and a clear understanding of the anatomical structure and the precise methods is required prior to operation performance. Satisfactory clinical outcomes can be achieved by thorough preoperative planning and proper implant fixation methods.

How many anchors to use in arthroscopic Bankart repairs? A biomechanical study of postage-stamp glenoid fractures

BACKGROUND

Deciding how many anchors to use in a Bankart repair is challenging because of the desire to enhance stability while avoiding a postage-stamp fracture of the glenoid rim.

METHODS

This controlled laboratory study investigated load to fracture of the anterior glenoid rim after drilling holes of varying number and diameter and inserting anchors of 2 different types and sizes, with and without perforation of the medial cortex of the glenoid, creating postage-stamp fractures using a metallic humeral head that was compressed against the anterior glenoid rim. A destructive model with a servohydraulic load frame was used to test 46 synthetic scapulae with compressive strength and elastic modulus similar to that of a human glenoid. Load to fracture of the intact glenoid was compared with groups with a varying number of anchor holes of different diameters, with anchors of different sizes and types, and with anchors perforating or not perforating the glenoid medial cortex. The percentage of force to fracture an intact specimen was used to identify relative risk of fracture: low risk >75%, moderate risk 75%-50%, and high risk <50% of intact load.

RESULTS

The load to fracture of intact glenoids was 1276 ± 42 N. Loads decreased linearly as the number of holes drilled on the glenoid rim increased. Compared with the 1.6-mm group, the 3.0-mm group had significantly lower glenoid rim strength in specimens with 4, 5, and 7 holes (P = .013, .032, and .045, respectively). All-suture anchors in 1.6-mm holes did not alter the glenoid rim strength, and up to 5 anchors were associated with low risk of fracture. Load to fracture was significantly higher with 3.0-mm rigid core bioabsorbable anchors with 4 anchors (1081 ± 6 N) compared with the 4-hole condition (838 ± 107 N; P = .033). Perforating the glenoid medial cortex with five 1.6-mm anchors significantly weakened the glenoid rim to 58% of intact (P = .012). Perforating the medial cortex weakened the glenoid rim to 52% and 42% (P < .001 for both) of intact in the 3.0-mm 4-anchor and 5-anchor constructions, constituting moderate and high risk of fracture, respectively.

CONCLUSION

Up to five 1.6-mm all-suture anchors and four 3.0-mm bioabsorbable rigid-core anchors were associated with low risk of fracture of the glenoid rim. Smaller diameter all-suture anchors best preserved structural integrity of the glenoid rim, whereas tunnel enlargement and perforation of the glenoid medial cortex were associated with moderate or high risk of a postage-stamp fracture.

Arthroscopic rotator cuff repair using a single or double row technique: A meta-analysis of randomized clinical trial

PURPOSE

To compare the double row technique versus the single row technique for arthroscopic rotator cuff repair, in order to assess whether there are clinical differences.

METHODS

Systematic review of randomized clinical trials comparing the clinical results of the double-row technique versus the single-row technique in arthroscopic rotator cuff repair. Demographic, clinical, and surgical variables were analyzed, including functional scores, tendon healing rate, and re-tear rate.

RESULTS

Thirteen randomized clinical trials were selected. 437 patients in the single row group (50.7%) and 424 patients in the double row group (49.3%) were analyzed. No significant differences were found between the two groups in terms of age (P=.84), sex (P=.23) and loss to follow-up (P=.52). Significant differences were found for the better results of the double row technique at the UCLA level (P=.01). No significant differences were found on the Constant-Murley scale (P=.87) or on the ASES scale (P=.56). Similarly, there was a higher healing rate (P=.006) and less risk of rotator cuff re-tears with the double row technique (P=.006).

CONCLUSIONS

In rotator cuff repair, the double row technique was found to be superior to the single row technique in terms of better UCLA score, better tendon healing rate, and lower re-tear rate. No clinically significant differences were found on the Constant-Murley scale or on the ASES scale.

The Efficiency of Highly Porous β-Tricalcium Phosphate With Bone Marrow Aspirate Concentrate in Midfoot Joint Arthrodesis

BACKGROUND

Nonunion is one of the most common and devastating complications following midfoot joint arthrodesis. Many different types of bone grafts and bone substitutes have been used to promote osseous fusion. However, there is no consensus on the gold standard bone grafting material and whether biologic materials should be used alone or in combination. The purpose of this study is to investigate the efficiency of highly porous β-tricalcium phosphate (β-TCP) with bone marrow aspirate concentrate (BMAC) in midfoot joint arthrodesis.

METHODS

This retrospective comparative study included patients who underwent midfoot joint arthrodesis using compression screws. Patients were classified into 2 groups: arthrodesis with highly porous β-TCP and BMAC (group A) and arthrodesis without them (group B). The osseous union rate was compared between the 2 groups. A total of 44 patients (46 feet) including 89 joints were included in this study.

RESULTS

There was a significant difference in the union rate between the 2 groups: 91.5% (43/47 joints) in arthrodesis with highly porous β-TCP and BMAC (group A) and 76.2% (32/42 joints) in arthrodesis without highly porous β-TCP and BMAC (group B; P = .048).

CONCLUSION

This study investigated the efficiency of highly porous β-TCP and BMAC to promote bony healing in midfoot joint arthrodesis. A significantly higher union rate was shown when arthrodesis was performed with highly porous β-TCP and BMAC, compared with arthrodesis performed without them. We suggest that highly porous β-TCP and BMAC can be a viable and effective adjunct to the fixation in midfoot joint arthrodesis.

LEVEL OF EVIDENCE

Level III: Retrospective comparative analysis.

Surgical Outcomes, Trends, and Risk Factors of Distal Triceps Repairs

BACKGROUND

Distal triceps ruptures are rare, and complete ruptures are commonly treated with surgery. Studies of patients in small cohorts with distal triceps tear have reported outcomes and risk factors; however, large-scale data are scant. This study seeks to determine current trends, outcomes, and risk factors of distal triceps tears.

METHODS

Within a large insurance claims database, distal triceps repair patients were identified through Current Procedural Terminology coding with concomitant distal triceps International Classification of Diseases, 9th Revision/10th Revision diagnosis codes and 1-year active status before and after surgery. Demographics, total costs, 90-day complications, and revision rates within 1 year of index surgery were analyzed. Logistic regression was performed for revision and complication rates using sex, age, and comorbidities (anabolic steroid use, diabetes, ischemic heart disease, tobacco use, rheumatoid arthritis, and chronic kidney disease).

RESULTS

A total of 8143 patients were included in the cohort. Male patients and patients aged 40 to 59 years comprised most of the study population. The postoperative complication rate was 5.8%, and the 1-year revision rate was 2.6%. Male sex, age >60 years, ischemic heart disease, rheumatoid arthritis, and chronic kidney disease were statistically significant risk factors for higher 90-day complication rates. Anabolic steroid use significantly increased the risk of surgical revision.

CONCLUSIONS

Distal triceps repairs in this large cohort study occur most frequently in men aged 40 to 59 years. Complications are generally low, with age >60 years, male sex, ischemic heart disease, rheumatoid arthritis, and chronic kidney disease as risk factors for 90-day complications and prior anabolic steroid use as a risk factor for 1-year revision surgery. This information can help to improve education and expectations of this procedure.

BIO-RSA vs. metal-augmented baseplate in shoulder osteoarthritis with multiplanar glenoid deformity: a comparative study of radiographic findings and patient outcomes

BACKGROUND

Reverse shoulder arthroplasty (RSA) requiring extensive reaming to address severe glenoid bone loss increases the risk of glenoid medialization and baseplate failure. We hypothesized that (1) metal-augmented baseplate prevents the medialization of the joint line and preserves glenoid bone stock similarly to bony increased-offset (BIO)-RSA and (2) bone graft viability and healing in BIO-RSA patients become compromised over time.

MATERIALS AND METHODS

Eighty-one patients (83 shoulders) underwent glenoid lateralization with bone (BIO-RSA group, 44) or metal-augmented baseplate (metallic increased-offset [MIO]-RSA group, 39) and a minimum follow-up of 24 months were included. The orientation and direction of glenoid erosion was identified and recorded using computerized 3D planning. Active range of motion, and the Western Ontario Osteoarthritis of the Shoulder (WOOS) index were assessed before arthroplasty and at the last follow-up visits. Radiographic changes around the glenoid and humeral components were assessed. Healing and thickness of bone graft were evaluated by predefined criteria. Postoperative global glenoid inclination (β angle) and retroversion were also measured.

RESULTS

Delta scores of active anterior elevation were higher in the MIO-RSA group (P = .027). The differences in the other planes of shoulder motion and in WOOS index scores between the groups were not significant. Preoperative glenoid retroversion was higher in BIO-RSA patients, and glenoid inclination was similar in both groups. Type B2 and B3 glenoids had a posterior-central (91%) and posterior-superior (90%) erosion with a mean posterior humeral head subluxation of 76% and 78%, respectively. The direction of erosion in type E2 and E3 glenoids was posterior-superior, with a mean posterior humeral head subluxation of 74%. The rate of high position of the glenosphere was higher in the BIO-RSA group (P = .022), whereas the values of β angle and postoperative retroversion were similar in the 2 groups. BIO-RSA group showed radiolucent lines <2 mm around the bone graft in 16 patients (36.4%) and decreased thickness in 15 (34.1%). Incomplete baseplate seating was found in 4 MIO-RSA patients (10%). We found higher rates of humerus condensation lines in MIO-RSA patients (P = .01) and higher rates of cortical thinning and tuberosity resorption in the BIO-RSA group (P = .027 and P = .004, respectively).

CONCLUSION

Metal-augmented glenoid is a suitable alternative to BIO-RSA to preserve bone and prevent the medialization of the joint line in arthritic glenoid with multiplanar glenoid deformity. Bone and metal augmentation provided satisfactory clinical outcomes. Bone graft resorption in BIO-RSA patients raise concern about the risk of baseplate loosening and requires further long-term studies.

What is the best method of fixation for minimally displaced subcapital neck of femur fractures? A systematic review

BACKGROUND

Femoral neck fractures are a common cause of morbidity and mortality in the community. Minimally displaced subcapital necks of femoral fractures are usually managed with internal fixation, although there is debate as to which method is superior. This systematic review aimed to compare the outcomes of different fixation methods in the management of this common fracture.

METHODS

This systematic review was conducted in accordance with PRISMA statement guidelines. The databases searched were MEDLINE (Ovid), Cochrane Central Register of Controlled Trials, and EMBASE (Ovid). The study quality and risk of bias were assessed using the Newcastle-Ottawa Quality Assessment Scale, and relevant data were extracted and synthesised.

RESULTS

Nine articles met the inclusion criteria. A total of 819 patients were included in this study. Eight of the nine studies were case series, and one was a randomised control trial. The mean risk of bias was 7.4/9 for non-randomised articles. The fixation methods used in the included studies were dynamic hip screw (DHS), cannulated screws, Smith-Peterson nail, hooknail, Moore's pins, and Knowle's pins. DHS was found to be a superior method of fixation and was supported by a clinical trial. It has high rates of union (99 %), low rates of avascular necrosis (<1 %), and low rates of fixation failure (<1 %).

CONCLUSIONS

Based on the available data, DHS appears to be the superior method of fixation for the minimally displaced subcapital neck of femoral fractures. Given the general low level of evidence currently available, additional clinical trials are needed in this area.

A comprehensive comparison and evaluation of surgical techniques for anterior shoulder instability: a Bayesian network meta-analysis

BACKGROUND

Anterior shoulder instability is a common clinical problem; however, conflicting evidence exists regarding optimal treatment algorithms. We perform a comparative analysis of stabilization techniques used for recurrent anterior shoulder instability to identify the one associated with the lowest rate of recurrent instability. We additionally explore how glenoid bone loss and osseus lesions affect recurrence rates.

METHODS

PubMed, MEDLINE, Embase, and Cochrane databases were searched for clinical studies comparing surgical techniques for anterior shoulder instability. Two team members independently assessed all potential studies for eligibility and extracted data. Each included study underwent a risk of bias assessment using the Cochrane risk of bias summary tool. The primary outcome of interest was the rate of recurrent instability, which underwent a Bayesian network meta-analysis. Additional analyses were performed relating to the degree of glenoid bone loss and the presence of osseous lesions.

RESULTS

Of 2699 studies screened, 52 studies with 4209 patients were included. Patients who underwent open Latarjet demonstrated the overall lowest rate of recurrent instability [log odds ratio (LOR) 1.93], whereas patients who underwent arthroscopic Bankart repair demonstrated the highest (LOR 2.87). When glenoid bone loss was 10% to 20%, open Latarjet had significantly lower recurrent instability (P = .0016) compared to arthroscopic Bankart repair. When glenoid bone loss increased from 0%-10% to 10%-20%, arthroscopic Bankart repair had a significantly increased rate of recurrence (P = .021). In the presence of an engaging Hill-Sachs lesion, both open Latarjet (P = .01) and arthroscopic Bankart with remplissage (P = .029) had significantly reduced recurrence rates compared to arthroscopic Bankart repair. Finally, regardless of procedure, the presence of a Hill-Sachs or bony Bankart lesion was associated with an increased risk of recurrent instability (r = 0.44, P = .0003, and r = 0.40, P = .006, respectively).

CONCLUSION

The open Latarjet has the overall lowest recurrent instability and significantly lower compared to arthroscopic Bankart repair in the setting of increasing glenoid bone loss. Bone loss between 0% and 10% results in similar outcomes across all procedures.

Contrast-Enhanced Ultrasound-Assessed Supraspinatus Muscle Perfusion Indicates Better Tissue Vitality and Outcome After Supraspinatus Tendon Repair and Subacromial Decompression

OBJECTIVE

Supraspinatus tendon (SSP) tears are a frequent indication for shoulder surgery. Therapy options include physiotherapy, tendon repair and less invasive surgical options like subacromial decompression (SAD). The selection of the most appropriate treatment depends on the specific characteristics and needs of each patient subgroup. Typically, physically active patients are candidates for tendon repair, while a conservative approach is preferred for individuals with severe muscle degeneration or low physical demands. The goal of this study was to assess the impact of contrast-enhanced ultrasound (CEUS)-assessed SSP muscle perfusion on post-operative shoulder function and tendon healing in patients undergoing SSP repair or SAD, thereby enhancing personalized therapy for SSP tendon tears.

METHODS

Two cohorts of patients with SSP tendon tears were treated either by SAD or tendon repair. Pre-operative and 6-month post-operative SSP muscle perfusion was quantified using CEUS and investigated as a surrogate for tissue vitality. The magnetic resonance imaging-derived parameters fatty infiltration and tendon retraction and established shoulder function scores were assessed pre- and post-operatively.

RESULTS

Thirty-five SSP repair patients were compared with 20 SAD patients. Pre-operative perfusion was comparable in the SAD and SSP repair cohorts when a re-tear occurred (wash-in perfusion index = 103.8 ± 124.0 vs. 114.6 ± 155.0, p = 0.83), while being significantly higher among patients with an intact repair (103.8 ± 124 vs. 325.4 ± 388.6, p = 0.006). Below-median pre-operative muscle perfusion was associated with lower post-operative shoulder function (Constant score: 59 ± 28 vs. 78 ± 19, p = 0.012).

CONCLUSION

CEUS can visualize SSP muscle perfusion as a surrogate for tissue vitality and tendon healing, which is associated with better post-operative shoulder function.

Biomechanical performance of talon cannulated compression device in pauwels type III fractures: a comparative study

INTRODUCTION

Pauwels Type III fractures are unstable and frequently treated with cannulated screws (CS) or dynamic hip screws (DHS). The newly developed talon-cannulated compression devices (TCCD) have the potential to provide rotational stability, mainly through their talon. The study investigates whether TCCD has mechanical advantages over conventional screws or can be as stable as DHS in a reverse triangle configuration for an unstable femoral neck fracture.

MATERIAL AND METHODS

After creating a standard Pauwels Type III unstable femoral neck fracture in 36 synthetic femur bones in cortical/hard cancellous bone density, 18 were reserved for dynamic-static tests, and 18 were used for torsional tests. Each group containing 18 synthetic bones was divided into three groups to apply three different fixation materials (CS, DHS, and TCCD), with six models in each group. The displacement amounts after dynamic-static tests were measured using the AutoCAD program according to the reference measurement criteria. During the dynamic tests, a series of photographs were taken. During the static tests, the beginning and post-test photographs were taken. Finally, torsional tests were performed until implant failure occurred in the synthetic femur.

RESULTS

In static axial loading tests, TCDD was found to be statistically superior to conventional CS in AL-BL distance (p = 0,014) and CL distance (p = 0,013) measurements, and there was no significant difference between the other groups. There was no significant difference between all groups in dynamic axial compression tests in any points of interest. In torsional tests, TCCD outperformed cannulated screws in stiffness (p = 0,001) and maximum torque (p = 0,001) categories, and they provided statistically significant superiority to DHS in yield torque (p<0,001) category.

CONCLUSIONS

Biomechanically, TCCD predominates conventional cannulated screws in femoral neck fractures. TCCD also has superior torsional properties than DHS in the yield torque category. Therefore, TCCD could be the implant of choice for unstable femoral neck fractures.

Heart surgery and simultaneous carotid endarterectomy - 10-years single-center experience

BACKGROUND

Patients with coronary artery heart disease frequently suffer concomitant carotid vascular disease and are at high perioperative risk for neurological adverse events. Several concepts regarding the timing and modality of carotid revascularization are controversially discussed in patients with heart disease. Current guidelines recommendations on myocardial revascularization recommend a concomitant carotid endarterectomy (CEA) in patients with a history of stroke/transient ischemic attack (TIA) or 50-99% grade of the carotid stenosis. Our study aimed to analyze early outcome parameters of patients undergoing coronary artery bypass grafting (CABG), but also including concomitant heart valve surgery and simultaneous CEA.

METHODS

This study retrospectively analyzed a cohort of 111 patients from our institutional database undergoing heart surgery with CABG or heart-valve surgery between 2010 and 2020 with concomitant carotid surgery due to significant carotid stenosis.

RESULTS

Patients undergoing heart and simultaneous carotid surgery were 77 ± 8.0 years of age with a body mass index of 28 ± 1.7 kg/m2 and a mean EuroSCORE II of 6.5 ± 2.3. Most patients (61%) had a smoking history and arterial hypertension (97%). The preoperative mean grade of internal carotid stenosis was 87 ± 4.2%, 13% of patients suffered from internal carotid artery stenosis on both sites. In total, 4.5% of patients had previously undergone internal carotid artery intervention before and 6.3% had a history of stroke with a persistent neurologic disorder in 1.8%, 8.9% of cases had prior TIA. Thirty-day all-cause mortality was 6.3% and postoperative neurologic events occurred with 7.2% TIA and 4.5% of disabling stroke.

CONCLUSION

Within the reported patient population of coronary artery heart disease and significant internal carotid stenosis, a one-time approach with CABG or heart-valve surgery and CEA is safe and feasible as justified by clinical and neurological postoperative outcomes.

What are patients asking and reading online? An analysis of online patient searches for rotator cuff repair

BACKGROUND

Patients undergoing rotator cuff surgery often search the internet for information regarding the procedure. One popular source, Google, compiles frequently asked questions and links to websites that may provide answers. This study provides an analysis of the most frequently searched questions associated with rotator cuff surgery. We hypothesize that there will be distinct search patterns associated with online queries about rotator cuff surgery that could provide unique insights into patient concerns.

METHODS

A set of search terms were entered into Google Web Search using a clean-install Google Chrome browser. Frequently associated questions and their webpages were extracted to a database via a data mining extension. Questions were categorized by topics relevant for rotator cuff arthroscopy. Websites were categorized by source and scored for quality using the JAMA Benchmark Criteria. Pearson's χ2 tests were used to analyze nominal data. Student t tests were performed to compare JAMA Benchmark Scores.

RESULTS

Of the 595 questions generated from the initial search, 372 unique questions associated with 293 websites were extracted and categorized. The most popular question topics were activities/restrictions (20.7%), pain (18.8%), and indications/management (13.2%). The 2 most common websites searched were academic (35.2%) and medical practice (27.4%). Commercial websites were significantly more likely to be associated with questions about cost (57.1% of all cost questions, P = .01), anatomy/function (62.5%, P = .001), and evaluation of surgery (47.6%, P < .001). Academic websites were more likely to be associated with questions about technical details of surgery (58.1%, P < .001). Medical practice and social media websites were more likely associated with activities/restrictions (48.1%, P < .001, and 15.6%, P < .001, respectively). Government websites were more likely associated with timeline of recovery (12.8%, P = .01). On a scale of 0-4, commercial and academic websites had the highest JAMA scores (3.06 and 2.39, respectively).

CONCLUSION

Patients seeking information regarding rotator cuff repair primarily use the Google search engine to ask questions regarding postoperative activity and restrictions, followed by pain, indications, and management. Academic websites, which were associated with technical details of surgery, and medical practice websites, which were associated with activities/restrictions, were the 2 most commonly searched resources. These results emphasize the need for orthopedic surgeons to provide detailed and informative instructions to patients undergoing rotator cuff repair, especially in the postoperative setting.