Comparison of cost, surgical time, and clinical results between arthroscopic transosseous rotator cuff repair with lateral cortical augmentation and arthroscopic transosseous equivalent suture bridge: A propensity score-matched analysis

BACKGROUND

To reduce the healthcare burden, the clinical results of arthroscopic rotator cuff repair and the cost of the implants used have recently been focused upon. This study compared implant cost, surgical time, short-term clinical results, and cuff repair integrity 2 years postoperatively between arthroscopic transosseous rotator cuff repair using lateral cortical augmentation (TOA) and arthroscopic transosseous-equivalent suture bridge (TOE).

METHODS

This study included 220 patients with rotator cuff repairs performed by a single surgeon between December 2013 and December 2018. Overall, 70 TOA and 68 TOE cases met the inclusion criteria. The same surgeon performed the procedures at two different hospitals, and the techniques differed between the facilities. A total of 42 TOA patients were matched with 42 TOE patients. The patients were matched using a propensity score analysis by gender, age, and cuff tear size. The minimum follow-up period was 2 years. Implant cost and surgical time were compared between the two methods. The range of motion, clinical outcomes, and visual analog scale were evaluated. Magnetic resonance imaging was performed to examine cuff repair integrity 2 years postoperatively.

RESULTS

The follow-up rate was 81% (112/138 patients). Implant cost was significantly lower with TOA ($1,396 vs. $2,165; p < 0.001) than with TOE. The average surgical time in the TOA method was significantly shorter than that in the TOE method (82 vs. 109 min; p = 0.001). At a minimum 2-year follow-up, the mean active elevation, abduction, and clinical outcomes improved with both methods, although no improvements in external and internal rotations were observed with either method. There were no significant differences in the postoperative variables and retear rate (TOA, 12%; TOE, 19%; p = 0.548) between the two methods.

CONCLUSIONS

TOA and TOE achieved comparable clinical results; however, TOA was more cost-effective and had a shorter surgical time than TOE.

LEVEL OF EVIDENCE

Level Ⅲ, retrospective matched control study.

Comparison of short-term clinical outcomes and radiographic changes in Grammont reverse shoulder arthroplasty between the French and Japanese populations: A propensity score-matched analysis

BACKGROUND

Although Grammont-style reverse total shoulder arthroplasty (RSA) showed excellent clinical results in Europe, its utility for Asian populations remains unclear. This study aimed to compare the French and Japanese populations in terms of range of motion (ROM), functional outcomes, and scapular notching rates in patients who underwent standard Grammont-style RSA. We hypothesized that RSA for the Japanese population may not provide as good ROM and functional results at the final follow-up as that for the French population.

METHODS

A total of 25 Japanese patients undergoing RSA were propensity score matched to 25 French patients undergoing RSA. The patients were matched for four different covariates using a propensity score analysis. The minimum follow-up period was 2 years. We investigated differences between the populations with respect to body size and shoulder joint ROM and Constant score (CS) measured preoperatively and at the final follow-up. Scapular notching was examined using radiographs at the final follow-up.

RESULTS

The average height and weight of the French and Japanese patients were 164 cm and 70 kg and 152 cm and 56 kg, respectively. Anterior elevation (AE), external rotation (ER) at the side, internal rotation (IR), and CS total changed from 101° to 145°, 17° to 15°, 4.5 points to 5.5 points, and 36 points to 72 points, respectively, in the French population and from 63° to 119°, 8.5° to 13°, 4.6 points to 4 points, and 28 points to 58 points, respectively, in the Japanese population. AE improved in both the groups; ER and IR remained unchanged before and after surgery. The frequency of scapular notching (>grade 1) was higher in the Japanese population (56%) than in the French population (20%) (p = 0.019).

CONCLUSIONS

Grammont-style RSA improved AE and CS in both the populations, but AE and CS were significantly higher in the French population than in the Japanese population at the final follow-up. Scapular notching frequently occurs in the Japanese population.

Impact of constrained humeral liner on impingement-free range of motion and impingement type in reverse shoulder arthroplasty using a computer simulation

BACKGROUND

Dislocation is a major complication of reverse total shoulder arthroplasty (RSA). The humeral liner may be changed to a constrained type when stability does not improve by increasing glenosphere size or lateralization with implants, and patients, particularly women with obesity, have risks of periprosthetic instability that may be secondary to hinge adduction on the thorax, but there are few reports on its impact on the range of motion (ROM). This study aimed to determine the influence of humeral liner constraint on impingement-free ROM and impingement type using an RSA computer simulation model.

METHODS

A virtual simulation model was created using 3D measurement software for conducting a simulation study. This study included 25 patients with rotator cuff tears and rotator cuff tear arthropathy. Impingement-free ROM and impingement patterns were measured during flexion, extension, abduction, adduction, external rotation, and internal rotation. Twenty-five cases with a total of 4 patterns of 2 multiplied by 2, making a total of 100 simulations: glenosphere (38 mm normal type vs. lateralized type) and humeral liner constraint (normal type vs. constrained type). There were 4 combinations: normal glenosphere and normal humeral liner, normal glenosphere and constrained humeral liner, lateralized glenosphere and normal humeral liner, and lateralized glenosphere and constrained humeral liner.

RESULTS

Significant differences were found in all impingement-free ROM in 1-way analysis of variance (abduction: P = .01, adduction: P < .01, flexion: P = .01, extension: P = .02, external rotation: P < .01, and internal rotation: P < .01). Tukey's post hoc tests showed that the impingement-free ROM was reduced during abduction, external rotation, and internal rotation with the combination of the normal glenosphere and constrained humeral liner compared with the other combinations, and improved by glenoid lateralization compared with the combination of the lateralized glenosphere and constrained humeral liner. In the impingement pattern, the Pearson χ2 test showed significantly greater proportion of impingement of the humeral liner into the superior part of the glenoid neck in abduction occurring in the combination of the normal glenosphere and constrained humeral liner group compared with the other groups (P < .01). Bonferroni post hoc tests revealed that the combination of the normal glenosphere and constrained humeral liner was significantly different from that of the lateralized glenosphere and constrained humeral liner (P < .01). Using constrained liners resulted in early impingement on the superior part of the glenoid neck in the normal glenosphere, whereas glenoid lateralization increased impingement-free ROM.

CONCLUSION

This RSA computer simulation model demonstrated that constrained humeral liners led to decreased impingement-free ROM. However, using the lateralized glenosphere improved abduction ROM.

Bone mineral density around cementless short stems after reverse shoulder arthroplasty: changes over time and its relationship to stem positioning

Background

There are numerous reports of bone adaptation observed on plain radiography studies after the use of cementless short stems in reverse shoulder arthroplasty. However, reports on changes in bone mineral density (BMD) around the stem using dual-energy X-ray absorptiometry (DEXA) are prominently absent. In the present study, we measured BMD around the stem using DEXA and investigated changes over time from postoperative year 1 to year 2. Additionally, the relationship between BMD changes, filling ratio, and stem alignment was examined.

Methods

Forty-seven patients with short cementless stems who could be assessed via DEXA at 1-2 years postoperatively were included. After dividing the zones around the stem into 5, the BMD in each zone was measured, in addition to BMD changes and amount of change from postoperative year 1 to year 2. The relationship between filling ratio and stem alignment on postoperative plain radiography was assessed.

Results

A significant decrease in BMD in zone 3 was observed between postoperative year 1 and year 2 (P = .02). Regarding filling ratio and stem alignment, a negative correlation between valgus stem alignment and BMD change observed in zone 1 (r = -0.470, P < .01). In addition, stem valgus greater than 6° correlated with a significant decrease in BMD in zone 1. (P = .01). No significant differences were found in the other zones. Furthermore, there was no correlation between filling ratio and BMD change.

Conclusion

In reverse shoulder arthroplasty cementless short stems, changes that that occurred between postoperative year 1 to year 2 demonstrated a decrease in BMD in zone 3. In addition, a decrease in BMD in zone 1 was observed with a stem alignment of valgus 6° or higher, suggesting that stem alignment within valgus 6° is required to prevent a decrease in BMD.

Reliability and validity of a new deltoid muscle area measurement method after reverse shoulder arthroplasty

Background

Accurate deltoid muscle assessment after reverse shoulder arthroplasty (RSA) is difficult using magnetic resonance imaging due to metal artifacts. We hypothesized that measuring the deltoid muscle area (DA) in the middle part of the deltoid's total length postoperatively would reduce metal artifacts and allow for an accurate assessment. This study aimed to assess the reliability and reproducibility of magnetic resonance imaging and evaluate its impact on postoperative outcomes.

Methods

The DA in the middle part of the muscle's total length was measured twice by four examiners using pre and postoperative magnetic resonance imaging in 60 patients who underwent RSA (22 men, 38 women; mean age: 77.4 years). The DA at the greater tuberosity was measured preoperatively, and its correlation with the middle part of the deltoid's total length was evaluated. The Constant-Murley Score was measured at 2 years postoperatively, and its correlation with the DA in the middle part of the deltoid's total length pre- and postoperatively was assessed.

Results

Intraclass correlation coefficients for intraobserver measurements of preoperative and postoperative DA in the middle part of the deltoid's total length were almost perfect, with mean values of 0.98 and 0.97, respectively. The intraclass correlation coefficients for interobserver reliability regarding the first and second DA measurements in the middle part of the deltoid's total length were 0.95 and 0.95 (preoperatively) and 0.89 and 0.90 (postoperatively). The Constant-Murley Score was assessed at 2 years postoperatively in 51 patients. Muscle strength was weakly and moderately correlated with preoperative DA (r = 0.33, P = .02) and postoperative DA (r = 0.49, P < .01), respectively.

Conclusion

DA measurement in the middle part of the deltoid's total length after RSA was not affected by metal artifacts and had excellent reproducibility. This measurement method positively correlated with postoperative muscle strength, suggesting its usefulness for predicting postoperative muscle strength.

Parathyroid Hormone Inhibits Fatty Infiltration and Muscle Atrophy After Rotator Cuff Tear by Browning of Fibroadipogenic Progenitors in a Rodent Model

BACKGROUND

Progressive fatty infiltration and muscle atrophy after rotator cuff tears lead to tendon repair failure and poor outcomes. Fibro-adipogenic progenitors (FAPs) are involved in fatty infiltration and muscle homeostasis of skeletal muscle. Inducing FAP differentiation into brown adipocyte-like "beige adipocytes" suppresses fatty infiltration and muscle atrophy.

HYPOTHESIS

Parathyroid hormone (PTH) suppresses fatty infiltration and muscle atrophy after rotator cuff tears in a rat model by browning of FAPs.

STUDY DESIGN

Controlled laboratory study.

METHODS

PTH was administered subcutaneously for 4 or 8 weeks to a rotator cuff tear model in rats. After treatment, fatty infiltration of supraspinatus muscles was assessed using Oil Red O staining and muscle atrophy using wet muscle weight and muscle fiber cross-sectional area. Costaining of platelet-derived growth factor receptor α (FAP marker) and uncoupling protein 1 (browning marker) was performed to confirm FAP browning by PTH. Mouse-isolated FAPs were cultured with PTH and evaluated for browning-related gene expression and adipogenic differentiation using BODIPY staining. Myogenic differentiation of C2C12 myoblasts was evaluated using coculture of PTH-treated browning FAPs with C2C12.

RESULTS

PTH inhibited fatty infiltration after rotator cuff tear at 8 weeks. Rotator cuff wet muscle loss of PTH-treated rats was inhibited at 4 and 8 weeks. Furthermore, PTH-treated rats demonstrated larger myofiber cross-sectional area than did untreated rats at 4 and 8 weeks. Costaining indicated colocalization of platelet-derived growth factor receptor α and uncoupling protein 1 and promoted PTH-induced FAP browning. PTH increased the expression of browning-related genes in FAPs and suppressed fat droplet accumulation in vitro. Coculture with PTH-treated FAPs promoted C2C12 cell differentiation into myotubes.

CONCLUSION

PTH induced FAP-derived beige adipocytes by upregulating browning-related gene expression, and the browning effect of PTH on FAPs inhibited fatty infiltration and muscle atrophy in the rat rotator cuff tear model. PTH might have potential as a therapeutic drug for fatty infiltration and muscle atrophy after rotator cuff tears.

CLINICAL RELEVANCE

PTH may expand treatment options for rotator cuff tears by reducing fatty infiltration and muscle atrophy after rotator cuff tears by browning of FAPs.

Assessment of Prevalence and Risk Factors for Central Sensitization Related to Shoulder Osteoarthritis and Rotator Cuff Tears Using the Central Sensitization Inventory: A Cross-Sectional Study in Shoulder Surgery Patients

Shoulder disorders occasionally cause intractable pain. Central sensitization (CS) may be involved in such pain. Identifying risk factors associated with CS is crucial for effective pain control. This study aimed to determine the effects of shoulder osteoarthritis and rotator cuff tears (RCT) on CS and associated factors. This study included patients evaluated for CS using the Central Sensitization Inventory (CSI) before surgery for shoulder osteoarthritis, RCT, or cuff tear arthropathy. Patients with a CSI score of 40 or higher were defined as having CS. The relationships between glenohumeral osteoarthritis (GHOA), RCT size, and CS were statistically analyzed. Multiple regression analysis was performed to examine the factors affecting CSI scores. Subjects included 167 patients: 131 patients had RCT without GHOA, 23 had GHOA with RCT, and 13 had GHOA without RCT. The GHOA group had a significantly higher CSI score (27.5 [10.8-40.5] vs. 18.0 [10.0-27.5]) and CS prevalence (27.8% vs. 8.4%) than the RCT without GHOA group. There was no significant correlation between RCT size and CSI scores. Multiple regression analysis showed that female sex, severe pain, and long pain duration were associated with higher CSI scores. Considering the risk factors for CS might be helpful in shoulder treatment.

Deep learning-based screening tool for rotator cuff tears on shoulder radiography

BACKGROUND

Early diagnosis of rotator cuff tears is essential for appropriate and timely treatment. Although radiography is the most used technique in clinical practice, it is difficult to accurately rule out rotator cuff tears as an initial imaging diagnostic modality. Deep learning-based artificial intelligence has recently been applied in medicine, especially diagnostic imaging. This study aimed to develop a deep learning algorithm as a screening tool for rotator cuff tears based on radiography.

METHODS

We used 2803 shoulder radiographs of the true anteroposterior view to develop the deep learning algorithm. Radiographs were labeled 0 and 1 as intact or low-grade partial-thickness rotator cuff tears and high-grade partial or full-thickness rotator cuff tears, respectively. The diagnosis of rotator cuff tears was determined based on arthroscopic findings. The diagnostic performance of the deep learning algorithm was assessed by calculating the area under the curve (AUC), sensitivity, negative predictive value (NPV), and negative likelihood ratio (LR-) of test datasets with a cutoff value of expected high sensitivity determination based on validation datasets. Furthermore, the diagnostic performance for each rotator cuff tear size was evaluated.

RESULTS

The AUC, sensitivity, NPV, and LR- with expected high sensitivity determination were 0.82, 84/92 (91.3%), 102/110 (92.7%), and 0.16, respectively. The sensitivity, NPV, and LR- for full-thickness rotator cuff tears were 69/73 (94.5%), 102/106 (96.2%), and 0.10, respectively, while the diagnostic performance for partial-thickness rotator cuff tears was low at 15/19 (78.9%), NPV of 102/106 (96.2%) and LR- of 0.39.

CONCLUSIONS

Our algorithm had a high diagnostic performance for full-thickness rotator cuff tears. The deep learning algorithm based on shoulder radiography helps screen rotator cuff tears by setting an appropriate cutoff value.

LEVEL OF EVIDENCE

Level III: Diagnostic Study.

7-Deoxyloganin 7-hydroxylase in Lonicera japonica cell cultures

The activity of 7-deoxyloganin 7-hydroxylase, an enzyme catalyzing the conversion of 7-deoxyloganin into loganin, was detected in a microsomal preparation from the cell suspension cultures of Lonicera japonica. It was dependent on NADPH and molecular oxygen. The enzymatic reaction was inhibited by carbon monoxide as well as by several cytochrome P450 inhibitors, especially ketoconazole, indicating that the reaction was mediated by cytochrome P450. The enzyme showed substrate specificity for 7-deoxyloganin. The K(m) values for 7-deoxyloganin and NADPH were estimated as 170 and 18 microM, respectively, from Lineweaver-Burk plots.

Identification of reaction products of methamphetamine and hydrogen peroxide in hair dye and decolorant treatments by high-performance liquid chromatography/mass spectrometry

The effect of hydrogen peroxide, a main component of hair dye and decolorant treatments, on methamphetamine (MA) was studied. Two analytical methods, thin-layer chromatography (TLC) and high-performance liquid chromatography/mass spectrometry (LC/MS), were used for the separation and identification of MA derivatives. Mixtures of MA solutions and hydrogen peroxide that had been incubated at 39 degrees C for 24 h were shown to contain para-hydroxy MA by TLC and para-, meta- and ortho-hydroxy MAs by LC/MS. In addition, MA N-oxide and N-hydroxy MA were found in MA/hydrogen peroxide mixtures immediately after mixing. Therefore, we concluded that MA changed to MA N-oxide and N-hydroxy MA before changing to para-, meta- and ortho-hydroxy MAs.