Coaxial electrospun fibers: applications in drug delivery and tissue engineering

Vancomycin-impregnated electrospun polycaprolactone (PCL) membrane for the treatment of infected bone defects: An animal study

There is no consensus for the management of critical infected bone defects. The purpose of this study was to produce a vancomycin-impregnated electrospun polycaprolactone (PCL) membrane for the treatment of infected critical bone defects, and test it in a rabbit model. Electrospinning produced a resorbable PCL fiber membrane containing vancomycin approximately 1 mm in thickness, with a pore diameter of <10 μm. Femur defects were made in the limbs of 18 rabbits and infected with Staphylococcus aureus. The rabbits were divided into three groups according to treatment: (1) Experimental group: rabbit freeze-dried allogeneic bone graft and the vancomycin-PCL membrane. (2) Control group 1: bone graft. (3) Control group 2: vancomycin-PCL membrane only. Culture showed no difference in osteoclast activity between the three groups. Transwell testing showed that almost no fibroblasts passed through the membrane during the first 24 h, but some fibroblasts were able to pass it after 72 h. At 12 weeks after surgery, there was significantly less inflammatory cell infiltration in the experimental compared to the control groups. New bone formation and fracture bone callus were greater in the experimental group than control groups. We thus conclude the resorbable electrospun vancomycin-impregnated PCL membrane was effective at controlling bone infection, and in the regeneration of bone in a critical bone defect animal model.

Axon mimicking hydrophilic hollow polycaprolactone microfibres for diffusion magnetic resonance imaging

Highly hydrophilic hollow polycaprolactone (PCL) microfibres were developed as building elements to create tissue-mimicking test objects (phantoms) for validation of diffusion magnetic resonance imaging (MRI). These microfibres were fabricated by the co-electrospinning of PCL-polysiloxane-based surfactant (PSi) mixture as shell and polyethylene oxide as core. The addition of PSi had a significant effect on the size of resultant electrospun fibres and the formation of hollow microfibres. The presence of PSi in both co-electrospun PCL microfibre surface and cross-section, revealed by X-ray energy dispersive spectroscopy (EDX), enabled water to wet these fibres completely (i.e., zero contact angle) and remained active for up to 12 months after immersing in water. PCL and PCL-PSi fibres with uniaxial orientation were constructed into water-filled phantoms. MR measurement revealed that water molecules diffuse anisotropically in the PCL-PSi phantom. Co-electrospun hollow PCL-PSi microfibres have desirable hydrophilic properties for the construction of a new generation of tissue-mimicking dMRI phantoms.

Electrospun and Electrosprayed Scaffolds for Tissue Engineering

Electrospinning and electrospraying technologies provide an accessible and universal synthesis method for the continuous preparation of nanostructured materials. This chapter introduces recent uses of electrospun and electrosprayed scaffolds for tissue regeneration applications. More recent in vitro and in vivo of electrospun fibers are also discussed in relation to soft and hard tissue engineering applications. The focus is made on the bone, vascular, skin, neural and soft tissue regeneration. An introduction is presented regarding the production of biomaterials made by synthetic and natural polymers and inorganic and metallic materials for use in the production of scaffolds for regenerative medicine. For this proposal, the following techniques are discussed: electrospraying, co-axial and emulsion electrospinning and bio-electrospraying. Tissue engineering is an exciting and rapidly developing field for the understanding of how to regenerate the human body.

Electrohydrodynamic methods for the development of pulmonary drug delivery systems

Electrospinning and electrospraying are two highly versatile and scalable electrohydrodynamic methods, which have attracted considerable attention during the last years towards the fabrication of polymer-based drug delivery systems. The latter may be obtained in the form of nano- or microfibers (via electrospinning) or as drug-loaded nano- and microparticles (via electrospraying). This review article begins with an introduction on the basic principles and the important influencing parameters governing the electrospinning/electrospraying processes, followed by an overview on their use for the development of nano/microfibers and nano/microparticles destined for use in pharmaceutical applications. Focus is given on research efforts targeting in the formulation of drug delivery systems and devices designed for pulmonary drug delivery applications thus emphasizing on the potential use of electrospinning and electrospraying in the area of inhaled medicines.

Coaxial electrospun PCL/Gelatin-MA fibers as scaffolds for vascular tissue engineering

Coaxial electrospinning is a technique that allows the production of nanofibers with a core-shell structure. Such fibers present several advantages as materials for the preparation of scaffolds, namely due to the possibility of combining a core with the desired mechanical properties with a shell prepared from biocompatible materials that will establish proper interactions with the host. Herein, core-shell fibrous meshes, composed of a polycaprolactone (PCL) core and a functionalized gelatin shell, were prepared by coaxial electrospinning and then photocrosslinked under UV light aiming to be used in vascular tissue regeneration. The suitability of the meshes for the pretended biomedical application was evaluated by assessing their chemical/physical properties as well as their haemo and biocompatibility in vitro. The obtained results revealed that meshes' shell prepared with a higher content of gelatin showed fibers with diameters presenting a unimodal distribution and a mean value of 600nm. Moreover, those fibers with higher content of gelatin also displayed lower water contact angles, and therefore higher hydrophilicities. Such features are crucial for the good biologic performance displayed by these meshes, when in contact with blood and with Normal Human Dermal Fibroblasts cells.

Nanofiber Scaffolds as Drug Delivery Systems to Bridge Spinal Cord Injury

The complex pathophysiology of spinal cord injury (SCI) may explain the current lack of an effective therapeutic approach for the regeneration of damaged neuronal cells and the recovery of motor functions. A primary mechanical injury in the spinal cord triggers a cascade of secondary events, which are involved in SCI instauration and progression. The aim of the present review is to provide an overview of the therapeutic neuro-protective and neuro-regenerative approaches, which involve the use of nanofibers as local drug delivery systems. Drugs released by nanofibers aim at preventing the cascade of secondary damage (neuro-protection), whereas nanofibrous structures are intended to re-establish neuronal connectivity through axonal sprouting (neuro-regeneration) promotion, in order to achieve a rapid functional recovery of spinal cord.

Sustained viral gene delivery from a micro-fibrous, elastomeric cardiac patch to the ischemic rat heart

Biodegradable and elastomeric patches have been applied to the surface of infarcted hearts as temporary mechanical supports to effectively alter adverse left ventricular remodeling processes. In this report, recombinant adeno-associated virus (AAV), known for its persistent transgene expression and low pathogenicity, was incorporated into elastomeric polyester urethane urea (PEUU) and polyester ether urethane urea (PEEUU) and processed by electrospinning into two formats (solid fibers and core-sheath fibers) designed to influence the controlled release behavior. The extended release of AAV encoding green fluorescent protein (GFP) was assessed in vitro. Sustained and localized viral particle delivery was achieved over 2 months in vitro. The biodegradable cardiac patches with or without AAV-GFP were implanted over rat left ventricular lesions three days following myocardial infarction to evaluate the transduction effect of released viral vectors. AAV particles were directly injected into the infarcted hearts as a control. Cardiac function and remodeling were significantly improved for 12 weeks after patch implantation compared to AAV injection. More GFP genes was expressed in the AAV patch group than AAV injection group, with both α-SMA positive cells and cardiac troponin T positive cells transduced in the patch group. Overall, the extended release behavior, prolonged transgene expression, and elastomeric mechanical properties make the AAV-loaded scaffold an attractive option for cardiac tissue engineering where both gene delivery and appropriate mechanical support are desired.

Electrospinning of Bioactive Wound-Healing Nets

The availability of appropriate dressings for treatment of wounds, in particular chronic wounds, is a task that still awaits better solutions than provided by currently applied materials. The method of electrospinning enables the fabrication of novel materials for wound dressings due to the high surface area and porosity of the electrospun meshes and the possibility to include bioactive ingredients. Recent results show that the incorporation of biologically active inorganic polyphosphate microparticles and microspheres and synergistically acting retinoids into electrospun polymer fibers yields biocompatible and antibacterial mats for potential dressings with improved wound-healing properties. The underlying principles and the mechanism of these new approaches in the therapy wounds, in particular wounds showing impaired healing, as well as for further applications in skin regeneration/repair, are summarized.

Investigating the Synergistic Effects of Combined Modified Alginates on Macrophage Phenotype

Understanding macrophage responses to biomaterials is crucial to the success of implanted medical devices, tissue engineering scaffolds, and drug delivery vehicles. Cellular responses to materials may depend synergistically on multiple surface chemistries, due to the polyvalent nature of cell⁻ligand interactions. Previous work in our lab found that different surface functionalities of chemically modified alginate could sway macrophage phenotype toward either the pro-inflammatory or pro-angiogenic phenotype. Using these findings, this research aims to understand the relationship between combined material surface chemistries and macrophage phenotype. Tumor necrosis factor-α (TNF-α) secretion, nitrite production, and arginase activity were measured and used to determine the ability of the materials to alter macrophage phenotype. Cooperative relationships between pairwise modifications of alginate were determined by calculating synergy values for the aforementioned molecules. Several materials appeared to improve M1 to M2 macrophage reprogramming capabilities, giving valuable insight into the complexity of surface chemistries needed for optimal incorporation and survival of implanted biomaterials.

Recent advances in multiaxial electrospinning for drug delivery

Electrospun fibers have seen an insurgence in biomedical applications due to their unique characteristics. Coaxial and triaxial electrospinning techniques have added new impetus via fabrication of multilayered nano and micro-size fibers. These techniques offer the possibility of forming fibers with features such as blending, reinforced core, porous and hollow structure. The unique fabrication process can be used to tailor the mechanical properties, biological properties and release of various factors, which can potentially be useful in various controlled drug delivery applications. Harvesting these advantages, various polymers and their combinations have been explored in a number of drug delivery and tissue regeneration applications. New advances have shown the requirement of drug-polymer compatibility in addition to drug-solvent compatibility. We summarize recent findings using both hydrophilic and hydrophobic (or lipophilic) drugs in hydrophobic or hydrophilic polymers on release behavior. We also describe the fundamental forces involved during the electrospinning process providing insight to the factors to be considered to form fibers. Also, various modeling efforts on the drug release profiles are summarized. In addition new developments in the immune response to the electrospun fibers, and advances in scale-up issues needed for industrial size manufacturing.

Increased cutaneous wound healing effect of biodegradable liposomes containing madecassoside: preparation optimization, in vitro dermal permeation, and in vivo bioevaluation

Madecassoside (MA) is highly potent in treating skin disorders such as wounds and psoriasis. However, the topical wound healing effect of MA was hampered by its poor membrane permeability. In order to overcome this shortcoming, MA liposomes were designed and prepared by a double-emulsion method to enhance transdermal and wound healing effects. In this study, response surface methodology was adopted to yield the optimal preparation conditions of MA double-emulsion liposomes with average particle size of 151 nm and encapsulation efficiency of 70.14%. Moreover, MA double-emulsion liposomes demonstrated superior stability and homogeneous appearance in 5 months; their leakage rate was <12% even at 37°C and <5% at 4°C within 1 month. In vitro skin permeation, skin distribution, and burn wound healing of MA liposomal formulations were conducted for the first time to evaluate MA delivery efficiency and wound healing effect. The transdermal property and wound cure effect of MA double-emulsion liposomes were superior to those of MA film dispersion liposomes, and both the methods were endowed with an excellent performance by polyethylene glycol modification. In conclusion, double-emulsion liposome formulation was an applicable and promising pharmaceutical preparation for enhancing MA delivery toward wound healing effect and improving wound-healing progress.