Metal oxide nanoparticles in electrochemical sensing and biosensing: a review

Discrimination of dopamine by an electrode modified with negatively charged manganese dioxide nanoparticles decorated on a poly(3,4 ethylenedioxythiophene)/reduced graphene oxide composite

A unique nanocomposite was fabricated using negatively charged manganese dioxide nanoparticles, poly (3,4-ethylenedioxythiophene) and reduced graphene oxide (MnO₂/PEDOT/rGO). The nanocomposite was deposited on a glassy carbon electrode (GCE) functionalized with amino groups. The modified GCE was used to electrochemically detect dopamine (DA). The surface morphology, charge effect and electrochemical behaviours of the modified GCE were characterized by scanning electron microscopy, energy dispersive X-ray analysis (EDX), cyclic voltammetry and electrochemical impedance spectroscopy, respectively. The MnO₂/PEDOT/rGO/GCE exhibited excellent performance towards DA sensing with a linear range between 0.05 and 135 µM with a lowest detection limit of 30 nM (S/N = 3). Selectivity towards DA was high in the presence of high concentrations of the typical interferences ascorbic acid and uric acid. The stability and reproducibility of the electrode were good. The sensor accurately determined DA in human serum. The synergic effect of the multiple components of the fabricated nanocomposite were critical to the good DA sensing performance. rGO provided a conductive backbone, PEDOT directed the uniform growth of MnO₂ and adsorbed DA via pi-pi and electrostatic interaction, while the negatively charged MnO₂ provided adsorption and catalytic sites for protonated DA. This work produced a promising biosensor that sensitively and selectively detected DA.

Construction of an electrochemical sensor with graphene aerogel doped with ZrO2 nanoparticles and chitosan for the selective detection of luteolin

A simple, fast and sensitive method for the detection of luteolin is proposed based on the chitosan/reduced graphene oxide aerogel with dispersed ZrO₂ nanoparticles modified glassy carbon electrode (ZrO₂/CS/rGOA-GCE) as an electrochemical sensor. The ZrO₂/CS/rGOA composite was prepared by one pot synthesis from a mixture of GO, CS and zirconyl chloride octahydrate, and subsequently be freeze-dried. Scanning electron microscope images showed a typical thin, wrinkled and fluctuant morphology of graphene nanosheets and the polymerized CS and ZrO₂ nanoparticles deposited on the surface of rGOA. Cyclic voltammetry and differential pulse voltammetry were used to measure the electrochemical response of ZrO₂/CS/rGOA composite-based biosensor towards luteolin at the working potential window (-0.8-0.8 V). The improved performance of this biosensor was attributed to efficient electron transfer and large surface area of 3D rGOA, and high specific activity of Zr towards adjacent hydroxyl groups. Under optimized conditions, the analytical performance of this method towards luteolin was investigated with a detection limit of 1 nM and a linear range from 5 nM to 1000 nM.. Finally, the ZrO₂/CS/rGOA-GCE electrochemical method coupled with solid phase extraction was used for the detection of luteolin in real samples. Recoveries of  spiked samples with different concentrations were in the range 78.6-103.3% with a relative RSD lower than 12.0%. Graphical abstract Schematic representation of the preparation of the ZrO₂ nanoparticles and chitosan doped graphene aerogel modified electrode. The electrode was employed for the detection of luteolin coupled with the solid-phase extraction technique.

Design Strategies for Electrochemical Aptasensors for Cancer Diagnostic Devices

Improved outcomes for many types of cancer achieved during recent years is due, among other factors, to the earlier detection of tumours and the greater availability of screening tests. With this, non-invasive, fast and accurate diagnostic devices for cancer diagnosis strongly improve the quality of healthcare by delivering screening results in the most cost-effective and safe way. Biosensors for cancer diagnostics exploiting aptamers offer several important advantages over traditional antibodies-based assays, such as the in-vitro aptamer production, their inexpensive and easy chemical synthesis and modification, and excellent thermal stability. On the other hand, electrochemical biosensing approaches allow sensitive, accurate and inexpensive way of sensing, due to the rapid detection with lower costs, smaller equipment size and lower power requirements. This review presents an up-to-date assessment of the recent design strategies and analytical performance of the electrochemical aptamer-based biosensors for cancer diagnosis and their future perspectives in cancer diagnostics.

Ni-Doped ZrO2 nanoparticles decorated MW-CNT nanocomposite for the highly sensitive electrochemical detection of 5-amino salicylic acid

Ni-ZrO₂/MWCNT/GCE for highly sensitive electrochemical detection of 5-ASA in biofluids.

Oxidation-assisted alkaline precipitation of nanoparticles using gas-diffusion electrodes

By benchmarking gas-diffusion electrocrystallization against alkaline precipitation for the synthesis of (hydr)oxide nanoparticles, oxidation-assisted precipitation of magnetite nanoparticles was demonstrated.

Application of biosynthesized metal nanoparticles in electrochemical sensors

Recently, the development of eco-friendly, cost-effective and reliable methods for synthesis of metal nanoparticles has drawn a considerable attention. The so-called green synthesis, using mild reaction conditions and natural resources as plant extracts and microorganisms, has established as a convenient, sustainable, cheap and environmentally safe approach for synthesis of a wide range of nanomaterials. Over the past decade, biosynthesis is regarded as an important tool for reducing the harmful effects of traditional nanoparticle synthesis methods commonly used in laboratories and industry. This review emphasizes the significance of biosynthesized metal nanoparticles in the field of electrochemical sensing. There is increasing evidence that green synthesis of nanoparticles provides a new direction in designing of cost-effective, highly sensitive and selective electrode-catalysts applicable in food, clinical and environmental analysis. The article is based on 157 references and provided a detailed overview on the main approaches for green synthesis of metal nanoparticles and their applications in designing of electrochemical sensor devices. Important operational characteristics including sensitivity, dynamic range, limit of detection, as well as data on stability and reproducibility of sensors have also been covered.

Advanced materials-integrated electrochemical sensors as promising medical diagnostics tools: A review

Electrochemical sensors have increasingly been linked with terms as modern biomedically effective highly selective and sensitive devices, wearable and wireless technology, portable electronics, smart textiles, energy storage, communication and user-friendly operating systems. The work brings the overview of the current advanced materials and their application strategies for improving performance, miniaturization and portability of sensing devices. It provides the extensive information on recently developed (bio)sensing platforms based on voltammetric, amperometric, potentiometric and impedimetric detection modes including portable, non-invasive, wireless, and self-driven miniaturized devices for monitoring human and animal health. Diagnostics of selected free radical precursors, low molecular biomarkers, nucleic acids and protein-based biomarkers, bacteria and viruses of today's interest is demonstrated.

Modular and Integrated Systems for Nanoparticle and Microparticle Synthesis-A Review

Nanoparticles (NPs) and microparticles (MPs) have been widely used in different areas of research such as materials science, energy, and biotechnology. On-demand synthesis of NPs and MPs with desired chemical and physical properties is essential for different applications. However, most of the conventional methods for producing NPs/MPs require bulky and expensive equipment, which occupies large space and generally need complex operation with dedicated expertise and labour. These limitations hinder inexperienced researchers to harness the advantages of NPs and MPs in their fields of research. When problems individual researchers accumulate, the overall interdisciplinary innovations for unleashing a wider range of directions are undermined. In recent years, modular and integrated systems are developed for resolving the ongoing dilemma. In this review, we focus on the development of modular and integrated systems that assist the production of NPs and MPs. We categorise these systems into two major groups: systems for the synthesis of (1) NPs and (2) MPs; systems for producing NPs are further divided into two sections based on top-down and bottom-up approaches. The mechanisms of each synthesis method are explained, and the properties of produced NPs/MPs are compared. Finally, we discuss existing challenges and outline the potentials for the development of modular and integrated systems.

Printed Circuit Board (PCB) Technology for Electrochemical Sensors and Sensing Platforms

The development of various biosensors has revolutionized the healthcare industry by providing rapid and reliable detection capability. Printed circuit board (PCB) technology has a well-established industry widely available around the world. In addition to electronics, this technology has been utilized to fabricate electrical parts, including electrodes for different biological and chemical sensors. High reproducibility achieved through long-lasting standard processes and low-cost resulting from an abundance of competitive manufacturing services makes this fabrication method a prime candidate for patterning electrodes and electrical parts of biosensors. The adoption of this approach in the fabrication of sensing platforms facilitates the integration of electronics and microfluidics with biosensors. In this review paper, the underlying principles and advances of printed board circuit technology are discussed. In addition, an overview of recent advancements in the development of PCB-based biosensors is provided. Finally, the challenges and outlook of PCB-based sensors are elaborated.

Functionalization of Magnetic Nanoparticles by Folate as Potential MRI Contrast Agent for Breast Cancer Diagnostics

In recent years, the intrinsic magnetic properties of magnetic nanoparticles (MNPs) have made them one of the most promising candidates for magnetic resonance imaging (MRI). This study aims to evaluate the effect of different coating agents (with and without targeting agents) on the magnetic property of MNPs. In detail, iron oxide nanoparticles (IONPs) were prepared by the polyol method. The nanoparticles were then divided into two groups, one of which was coated with silica (SiO2) and hyperbranched polyglycerol (HPG) (SPION@SiO2@HPG); the other was covered by HPG alone (SPION@HPG). In the following section, folic acid (FA), as a targeting agent, was attached on the surface of nanoparticles. Physicochemical properties of nanostructures were characterized using Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and a vibrating sample magnetometer (VSM). TEM results showed that SPION@HPG was monodispersed with the average size of about 20 nm, while SPION@SiO2@HPG had a size of about 25 nm. Moreover, HPG coated nanoparticles had much lower magnetic saturation than the silica coated ones. The MR signal intensity of the nanostructures showed a relation between increasing the nanoparticle concentrations inside the MCF-7 cells and decreasing the signal related to the T2 relaxation time. The comparison of coating showed that SPION@SiO2@HPG (with/without a targeting agent) had significantly higher r2 value in comparison to Fe3O4@HPG. Based on the results of this study, the Fe3O4@SiO2@HPG-FA nanoparticles have shown the best magnetic properties, and can be considered promising contrast agents for magnetic resonance imaging applications.

Electrochemical detection of ascorbic acid in artificial sweat using a flexible alginate/CuO-modified electrode

A flexible sensor is presented for electrochemical detection of ascorbic acid in sweat based on single-step modified gold microelectrodes. The modification consists of electrodeposition of alginate membrane with trapped CuO nanoparticles. The electrodes are fabricated at a thin polyimide support and the soft nature of the membrane can withstand mechanical stress beyond requirements for skin monitoring. After characterization of the membrane via optical and scanning electron microscopy and cyclic voltammetry, the oxidative properties of CuO are exploited toward ascorbic acid for amperometric measurement at micromolar levels in neutral buffer and acidic artificial sweat, at ultralow applied potential (- 5 mV vs. Au pseudo-reference electrode). Alternatively, measurement of the horizontal shift of redox peaks by cyclic voltammetry is also possible. Obtaining a limit of detection of 1.97 μM, sensitivity of 0.103 V log (μM)^-1 of peak shift, and linear range of 10-150 μM, the effect of possible interfering species present in sweat is minimized, with no observable cross-reaction, thus maintaining a high degree of selectivity despite the absence of enzymes in the fabrication scheme. With a lateral flow approach for sample delivery, repeated measurements show recovery in few seconds, with relative standard deviation of about 20%, which can serve to detect increased loss or absence of vitamin, and yet be improved in future by optimized device designs. This sensor is envisioned as a promising component of wearable devices for e.g. non-invasive monitoring of micronutrient loss through sweat, comprising features of light weight, low cost, and easy fabrication needed for such application. Graphical Abstract Schematic depiction of the cyclic voltammetry signal change as the sweat flows over the sensor surface.

Colloidal MoS2 van der Waals Template for Growing Highly Uniform Nanomaterials

The van der Waals (vdW) structures of transition metal dichalcogenides (TMDCs) have been studied extensively owing to the excellent electronic, optoelectronic, and catalytic performance with the atomic-scale sharpness of the interfaces. In addition, the presence of substitution and redox reactions in the vdW gaps also provides huge potential to be employed as a nanoscale reactor. Herein, the vdW gap of colloidal MoS₂ is reported as a natural template for the formation of CoMo bimetallic oxide nanoparticles (BMONPs) with highly uniform size (∼4 nm), which resulted in further synthesis of the thin multiwalled carbon nanotubes with extremely narrow diameter distribution. This study not only pioneers a new application of TMDCs but also provides an efficient means to control the size of nanomaterials, which directly affect material properties.

Facile, one-pot biosynthesis and characterization of iron, copper and silver nanoparticles using Syzygium cumini leaf extract: As an effective antimicrobial and aflatoxin B1 adsorption agents

In this study, a facile, ecological and economical green method is described for the fabrication of iron (Fe), copper (Cu) and silver (Ag) nanoparticles (NPs) from the extract of Syzygium cumini leaves. The obtained metal NPs were categorized using UV/Vis, SEM, TEM, FTIR and EDX-ray spectroscopy techniques. The Fe-, Cu- and Ag-NPs were crystalline, spherical and size ranged from 40−52, 28−35 and 11−19 nm, respectively. The Ag-NPs showed excellent antimicrobial activities against methicillin- and vancomycin-resistance Staphylococcus aureus bacterial strains and Aspergillus flavus and A. parasiticus fungal species. Furthermore, the aflatoxins (AFs) production was also significantly inhibited when compared with the Fe- and Cu-NPs. In contrast, the adsorption results of NPs with aflatoxin B₁ (AFB₁) were observed as following order Fe->Cu->Ag-NPs. The Langmuir isotherm model well described the equilibrium data by the sorption capacity of Fe-NPs (105.3 ng mg^-1), Cu-NPs (88.5 ng mg^-1) and Ag-NPs (81.7 ng mg^-1). The adsorption was found feasible, endothermic and follow the pseudo-second order kinetic model as revealed by the thermodynamic and kinetic studies. The present findings suggests that the green synthesis of metal NPs is a simple, sustainable, non-toxic, economical and energy-effective as compared to the others conventional approaches. In addition, synthesized metal NPs might be a promising AFs adsorbent for the detoxification of AFB₁ in human and animal food/feed.

Carbonaceous Nanomaterials Employed in the Development of Electrochemical Sensors Based on Screen-Printing Technique—A Review

This paper aims to revise research on carbonaceous nanomaterials used in developing sensors. In general, nanomaterials are known to be useful in developing high-performance sensors due to their unique physical and chemical properties. Thus, descriptions were made for various structural features, properties, and manner of functionalization of carbon-based nanomaterials used in electrochemical sensors. Of the commonly used technologies in manufacturing electrochemical sensors, the screen-printing technique was described, highlighting the advantages of this type of device. In addition, an analysis was performed in point of the various applications of carbon-based nanomaterial sensors to detect analytes of interest in different sample types.

Recent Advances in Electrochemical Sensors and Biosensors for Detecting Bisphenol A

In recent years, several studies have focused on environmental pollutants. Bisphenol A (BPA) is one prominent industrial raw material, and its extensive utilization and release into the environment constitute an environmental hazard. BPA is considered as to be an endocrine disruptor which mimics hormones, and has a direct relationship to the development and growth of animal and human reproductive systems. Moreover, intensive exposure to the compound is related to prostate and breast cancer, infertility, obesity, and diabetes. Hence, accurate and reliable determination techniques are crucial for preventing human exposure to BPA. Experts in the field have published general electrochemical procedures for detecting BPA. The present timely review critically evaluates diverse chemically modified electrodes using various substances that have been reported in numerous studies in the recent decade for use in electrochemical sensors and biosensors to detect BPA. Additionally, the essential contributions of these substances for the design of electrochemical sensors are presented. It has been predicted that chemically modified electrode-based sensing systems will be possible options for the monitoring of detrimental pollutants.

Recent advances of electrochemical and optical enzyme-free glucose sensors operating at physiological conditions

Diabetes is a pathological condition that requires the continuous monitoring of glucose level in the blood. Its control has been tremendously improved by the application of point-of-care devices. Conventional enzyme-based sensors with electrochemical and optical transduction systems can successfully measure the glucose concentration in human blood, but they suffer from the low stability of the enzyme. Non-enzymatic wearable electrochemical and optical sensors, with low-cost, high stability, point-of-care testing and online monitoring of glucose levels in biological fluids, have recently been developed and can help to manage and control diabetes worldwide. Advances in nanoscience and nanotechnology have enabled the development of novel nanomaterials that can be implemented for the use in enzyme-free systems to detect glucose. This review summarizes recent developments of enzyme-free electrochemical and optical glucose sensors, as well as their respective wearable and commercially available devices, capable of detecting glucose at physiological pH conditions without the need to pretreat the biological fluids. Additionally, the evolution of electrochemical glucose sensor technology and a couple of widely used optical detection systems along with the glucose detection mechanism is also discussed. Finally, this review addresses limitations and challenges of current non-enzymatic electrochemical, optical, and wearable glucose sensor technologies and highlights opportunities for future research directions.

Seed-mediated Electrochemically Developed Au Nanostructures with Boosted Sensing Properties: An Implication for Non-enzymatic Glucose Detection

A new approach has been developed to improve sensing performances of electrochemically grown Au nanostructures (AuNSs) based on the pre-seeding of the electrode. The pre-seeding modification is simply carried out by vacuum thermal deposition of 5 nm thin film of Au on the substrate followed by thermal annealing at 500 °C. The electrochemical growth of AuNSs on the pre-seeded substrates leads to impressive electrochemical responses of the electrode owing to the seeding modification. The dependence of the morphology and the electrochemical properties of the AuNSs on various deposition potentials and times have been investigated. For the positive potentials, the pre-seeding leads to the growth of porous and hole-possess networks of AuNSs on the surface. For the negative potentials, AuNSs with carved stone ball shapes are produced. The superior electrode was achieved from AuNSs developed at 0.1 V for 900 s with pre-seeding modification. The sensing properties of the superior electrode toward glucose detection show a high sensitivity of 184.9 µA mM⁻¹ cm⁻², with a remarkable detection limit of 0.32 µM and a wide range of linearity. The excellent selectivity and reproducibility of the sensors propose the current approach as a large-scale production route for non-enzymatic glucose detection.

Design and Construction of the Gadolinium Oxide Nanorod-Embedded Graphene Aerogel: A Potential Application for Electrochemical Detection of Postharvest Fungicide

The rapid development of electrochemical sensors holds great promise to serve as next generation point-of-care safety devices. However, the practical performances of electrochemical sensors are cruelly limited by stability, selectivity, and sensitivity. These issues have been well addressed by introducing rational designs into the modified electrode for achieving the required performances. Herein, we demonstrate the gadolinium oxide nanorods embedded on the graphene aerogel (GdO NRs/GA) for a highly selective electrochemical detection of carbendazim (CDM). The GdO NRs/GA nanocomposite was characterized using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, field emission gun scanning electron microscopy, transmission electron microscopy with elemental mapping, and energy-dispersive spectrometry. The GdO NRs/GA-modified electrode shows a much improved electrochemical performance compared to other electrodes. Interestingly, the GdO NRs are strongly anchored in the GA matrix, which provides a more sufficient pathway for the rapid electron and ion transportation. On the basis of these findings, our proposed sensor achieves a wide detection range from 0.01 to 75 μM with a correlation coefficient of 0.996 and a low detection limit of 3.0 nM. Most markedly, the real-time monitoring of the proposed electrochemical sensor was proved by the successful determination of CDM in environmental samples. Our research work has opened a novel way to the rationale for the construction of highly efficient practical electrochemical sensors.

Discrete Hf18 Metal-oxo Cluster as a Heterogeneous Nanozyme for Site-Specific Proteolysis

The selective hydrolysis of proteins by non-enzymatic catalysis is difficult to achieve, yet it is crucial for applications in biotechnology and proteomics. Herein, we report that discrete hafnium metal-oxo cluster [Hf₁₈ O₁₀ (OH)₂₆ (SO₄ )₁₃ ⋅(H₂ O)₃₃ ] (Hf₁₈ ), which is centred by the same hexamer motif found in many MOFs, acts as a heterogeneous catalyst for the efficient hydrolysis of horse heart myoglobin (HHM) in low buffer concentrations. Among 154 amino acids present in the sequence of HHM, strictly selective cleavage at only 6 solvent accessible aspartate residues was observed. Mechanistic experiments suggest that the hydrolytic activity is likely derived from the actuation of Hf^IV Lewis acidic sites and the Brønsted acidic surface of Hf₁₈ . X-ray scattering and ESI-MS revealed that Hf₁₈ is completely insoluble in these conditions, confirming the HHM hydrolysis is caused by a heterogeneous reaction of the solid Hf₁₈ cluster, and not from smaller, soluble Hf species that could leach into solution.

Interaction between Amorphous Zirconia Nanoparticles and Graphite: Electrochemical Applications for Gallic Acid Sensing Using Carbon Paste Electrodes in Wine

Amorphous zirconium oxide nanoparticles (ZrO₂) have been used for the first time, to modify carbon paste electrode (CPE) and used as a sensor for the electrochemical determination of gallic acid (GA). The voltammetric results of the ZrO₂ nanoparticles-modified CPE showed efficient electrochemical oxidation of gallic acid, with a significantly enhanced peak current from 261 µA ± 3 to about 451 µA ± 1. The modified surface of the electrode and the synthesised zirconia nanoparticles were characterised by scanning electrode microscopy (SEM), Energy-dispersive x-ray spectroscopy (EDXA), X-ray powdered diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). Meanwhile, the electrochemical behaviour of GA on the surface of the modified electrode was studied using differential pulse voltammetry (DPV), showing a sensitivity of the electrode for GA determination, within a concentration range of 1 × 10⁻⁶ mol L⁻¹ to 1 × 10⁻³ mol L⁻¹ with a correlation coefficient of R² of 0.9945 and a limit of detection of 1.24 × 10⁻⁷ mol L⁻¹ (S/N = 3). The proposed ZrO₂ nanoparticles modified CPE was successfully used for the determination of GA in red and white wine, with concentrations of 0.103 mmol L⁻¹ and 0.049 mmol L⁻¹ respectively.

Multiwalled Carbon Nanotubes-CeO2 Nanorods: A "Nanonetwork" Modified Electrode for Detecting Trace Rifampicin

Herein, a "nanonetwork" modified electrode was fabricated based on multiwalled carbon nanotubes and CeO₂ nanorods. Scanning electron microscopy, X-ray powder diffraction and zeta potential were employed to characterize this electrode. Multiwalled carbon nanotubes negatively charged and CeO₂ nanorods positively charged form "nanonetwork" via electrostatic interaction. The performance of the CeO₂ nanorods-based electrode remarkably improved due to the introduction of multiwalled carbon nanotubes. The detection of rifampicin (RIF) was used as a model system to probe this novel electrode. The results showed a significant electrocatalytic activity for the redox reaction of RIF. Differential pulse voltammetry was used to detect rifampicin, the reduction peak current of rifampicin linear with the logarithm of their concentrations in the range of 1.0 × 10^-13-1.0 × 10^-6 mol/L, The linear equation is i_p = 6.72 + 0. 46lgc, the detect limit is 3.4 × 10^-14 mol/L (S/N = 3). Additionally, the modified electrode exhibits enduring stability, excellent reproducibility, and high selectivity. This strategy can be successfully used to detect trace rifampicin in samples with satisfactory results.

Screen-Printed Electrodes Modified with Metal Nanoparticles for Small Molecule Sensing

Recent progress in the field of electroanalysis with metal nanoparticle (NP)-based screen-printed electrodes (SPEs) is discussed, focusing on the methods employed to perform the electrode surface functionalization, and the final application achieved with different types of metallic NPs. The ink mixing approach, electrochemical deposition, and drop casting are the usual methodologies used for SPEs' modification purposes to obtain nanoparticulated sensing phases with suitable tailor-made functionalities. Among these, applications on inorganic and organic molecule sensing with several NPs of transition metals, bimetallic alloys, and metal oxides should be highlighted.

Facile SrO nanorods: an efficient and alternate detection approach for the selective removal of 4-aminophenol towards environmental safety

In this approach, it is introduced a new route to fabricate a reliable and reproducible wet-chemically prepared SrO NRs fabricated glassy carbon electrode sensor probe by electrochemical method for the detection of phenolic derivatives for the safety of environmental and healthcare fields in broad scales.

Designed single-phase ZrO2 nanocrystals obtained by solvothermal syntheses

Crystal growth pathways controlled by the acidity, type and concentration of the capping agent lead to different nanostructures and crystalline phases.

Zirconia nanocomposites with carbon and iron(iii) oxide for voltammetric detection of sub-nanomolar levels of methyl parathion

This study reports the synthesis of zirconia nanoparticles loaded on various carbon substrates, namely, reduced graphene oxide (Zr-r-GO), carbon nanotubes (Zr-CNT), and activated carbon (Zr-AC). In addition, a composite of zirconia-iron mixed oxide loaded on activated carbon (FeZr-AC) was also synthesized. The materials were characterized using SEM-EDX, HRTEM, FTIR, Raman spectroscopy, TGA and XRD. The FeZr-AC sample was found to have a nanorod like morphology. The samples were evaluated for their sensing potential towards methyl parathion (MP) using differential pulse voltammetry in a range of 0.0 V to -0.9 V (vs. Ag/AgCl) by drop casting on a glassy carbon electrode (GCE). All the modified GCEs best operated at a working potential of 0.4-0.9 V vs. Ag/AgCl/Cl-. FeZr-AC was found have the best limit of detection followed by Zr-AC, Zr-CNT and Zr-r-GO with their detection limits being 1.7 × 10-9 M, 17.2 ×10-9 M, 243.3 × 10-9 M and 534.0 × 10-9 M respectively. These materials were then used to detect MP in spiked sewage samples and showed good recoveries.

Interface-Assisted Synthesis of the Mn3-xFexO4 Gradient Film with Multifunctional Properties

Anisotropic gradient materials are considered as promising and novel in that they have numerous functional properties and are able to transform into hierarchical microstructures. We report a facile method of gradient inorganic thin film synthesis through diffusion-controlled deposition at the gas-solution interface. To investigate the reaction of interfacial phase boundary controllable hydrolysis by gaseous ammonium, an aqueous solution of FeCl₃ and MnCl₂ was chosen, as the precipitation pH values for the hydroxides of these metals differ gradually. As a result of synthesis using the gas-solution interface technique (GSIT), a thin film is formed on the surface of the solution that consists of Mn²⁺(Fe,Mn)₂³⁺O₄ nanoparticles with hausmannite crystal structure. The ratio between iron and manganese in the film can be adjusted over a wide range by varying the synthetic procedure. Specific conditions are determined that allow the formation of a Mn-Fe mixed oxide film with a gradient of composition, morphology, and properties, as well as its further transformation into microscrolls with a diameter of 10-20 μm and a length of up to 300 μm, showing weak superparamagnetic properties. The technique reported provides a new interfacial route for the development of functional gradient materials with tubular morphology.

Use of nanoparticles in skeletal tissue regeneration and engineering

Bone and osteochondral defects represent one of the major causes of disabilities in the world. Derived from traumas and degenerative pathologies, these lesions cause severe pain, joint deformity, and loss of joint motion. The standard treatments in clinical practice present several limitations. By producing functional substitutes for damaged tissues, tissue engineering has emerged as an alternative in the treatment of defects in the skeletal system. Despite promising preliminary clinical outcomes, several limitations remain. Nanotechnologies could offer new solutions to overcome those limitations, generating materials more closely mimicking the structures present in naturally occurring systems. Nanostructures comparable in size to those appearing in natural bone and cartilage have thus become relevant in skeletal tissue engineering. In particular, nanoparticles allow for a unique combination of approaches (e.g. cell labelling, scaffold modification or drug and gene delivery) inside single integrated systems for optimized tissue regeneration. In the present review, the main types of nanoparticles and the current strategies for their application to skeletal tissue engineering are described. The collection of studies herein considered confirms that advanced nanomaterials will be determinant in the design of regenerative therapeutic protocols for skeletal lesions in the future.