Effective blocking of HIV-1 proteinase activity by characteristic inhibitors of aspartic proteinases

The 3-D structure of HIV-1 proteinase and the design of antiviral agents for the treatment of AIDS

A proteinase is essential for replication of HIV. Cloning and chemical synthesis have provided a sufficient supply of HIV-1 proteinase for the determination of its three-dimensional structure. Analogies between the structures of HIV-1 proteinase and the mammalian enzyme renin, which is involved in the control of blood pressure, have given important clues concerning the design of specific inhibitors that have antiviral activity.

Polymerizing properties of pepstatin A

Pepstatin A, a pentapeptide aspartyl protease inhibitor, can spontaneously polymerize into filaments having a helical substructure and, after negative staining, characteristic diameters ranging from 6 to 12 nm. Optical diffraction analysis demonstrated that these filaments consist of a 6-nm-wide strand helically wound with a periodic pitch of 25 nm. Selected images suggest that these filaments may actually be composed of two, intertwined 6-nm-wide strands, an hypothesis not at variance with the diffraction data. These filaments may extend over several micrometers. At low ionic strength and neutral pH, the critical concentration for pepstatin A filament assembly is 0.1 mM. At higher pepstatin A concentrations or in physiological salt solutions, a variety of higher order structures were observed, including ribbons, sheets, and cylinders with both regular and twisted or irregular geometries. Pepstatin A polymerized into these higher order structures loses its ability to inhibit the aspartyl protease of the human immunodeficiency virus type 1. These results have implications not only for model studies on the polymerization of small peptides into higher order structures, but also for the practical development of soluble protease inhibitors.

Modified oligopeptides designed to interact with the HIV-1 proteinase inhibit viral replication

The human immunodeficiency virus 1 (HIV-1) codes for a proteinase that cuts viral proteins at specific sites. We have tested 13 modified oligopeptides related to these cleavage sites to see if they inhibit viral replication. To indicate whether a decrease in replication could be due to a general inhibition of cell metabolism, we also measured the effect of the peptides on cellular protein synthesis. Three of the peptides tested (Ac-Gln-Asn-Sta-Val-NH2, Ac-Gln-Asn-Sta-Val-Val-NH2, and Ac-Glu-Asn-Sta-Ile-NH2) inhibited HIV-1 replication at concentrations that did not inhibit protein synthesis. Ac-Gln-Asn-Sta-Val-NH2 was the most potent, causing an approximately 40% decrease in viral replication, measured as the synthesis of HIV-1 antigens and the formation of infectious particles.

Hydrolysis of synthetic chromogenic substrates by HIV-1 and HIV-2 proteinases

Kinetic constants (Km,Kcat) are derived for the hydrolysis of a number of chromogenic peptide substrates by the aspartic proteinase from HIV-2. The effect of systematic replacement of the P2 residue on substrate hydrolysis by HIV-1 and HIV-2 proteinases is examined.

Affinity purification of HIV-1 and HIV-2 proteases from recombinant E. coli strains using pepstatin-agarose

A procedure is described which employs pepstatin-agarose for the affinity purification of either HIV-1 or HIV-2 protease from two similar recombinant E. coli constructs that were developed for the expression of these enzymes. HIV-2 protease was routinely expressed at much higher levels than the HIV-1 enzyme and pepstatin-agarose was the only chromatography step required to isolate pure HIV-2 protease from crude bacterial lysates. A Mono S ionic exchange step following pepstatin-agarose chromatography was sufficient to bring the HIV-1 protease to homogeneity. Purification of either enzyme can be completed in several days yielding homogeneous preparations suitable for crystallization and other physical characterization.

Design, activity, and 2.8 A crystal structure of a C2 symmetric inhibitor complexed to HIV-1 protease

A two-fold (C2) symmetric inhibitor of the protease of human immunodeficiency virus type-1 (HIV-1) has been designed on the basis of the three-dimensional symmetry of the enzyme active site. The symmetric molecule inhibited both protease activity and acute HIV-1 infection in vitro, was at least 10,000-fold more potent against HIV-1 protease than against related enzymes, and appeared to be stable to degradative enzymes. The 2.8 angstrom crystal structure of the inhibitor-enzyme complex demonstrated that the inhibitor binds to the enzyme in a highly symmetric fashion.

Mutational analysis of a native substrate of the human immunodeficiency virus type 1 proteinase

Proteolytic processing of the gag/pol precursor by the human immunodeficiency virus type 1 proteinase is essential for the production of infectious viral particles. Although the sites of virus-specific cleavages have been determined, the primary amino acid sequences surrounding these sites are heterogeneous and the determinants that direct the cleavage specificity exhibited by human immunodeficiency virus type 1 proteinase remain largely undefined. We performed mutational analysis of the Tyr/Pro site, which produces the amino terminus of the viral capsid protein, and the Phe/Pro site, which produces the amino terminus of the proteinase. Mutations were made in a clone encoding a frameshift mutation that results in the expression of equimolar amounts of the substrate and proteinase in the form of a truncated gag/pol precursor. After single-amino-acid substitutions were made, their effects on proteolytic processing were examined by in vitro transcription and in vitro translation of the synthetic mRNA; translation products were then processed by exogenously added purified proteinase. Single-amino-acid substitutions yielded both substrates which were processed with wild-type efficiency and substrates on which processing was impaired. At the Tyr/Pro site in gag, processing was severely inhibited by substitutions within the P4, P2, P1, and P2' positions. The Phe/Pro site in pol, however, demonstrated far greater tolerance to amino acid substitution. These data suggest that the primary amino acid sequence around a scissile bond is more critical for cleavage of the Tyr/Pro site than the Phe/Pro site.

Human immunodeficiency virus type 1 protease cleaves the intermediate filament proteins vimentin, desmin, and glial fibrillary acidic protein

The intermediate filament proteins vimentin, desmin, and glial fibrillary acidic protein are cleaved in vitro by human immunodeficiency virus type 1 protease (HIV-1 PR). Microsequencing showed that HIV-1 PR cleaved both human and murine vimentin between leucine-422 and arginine-423 within the sequence between positions 418 and 427, Ser-Ser-Leu-Asn-Leu/Arg-Glu-Thr-Asn-Leu (SSLNL/RETNL). Minor cleavages at other sites were also observed. Heat-denatured vimentin was cleaved by HIV-1 PR less efficiently than native vimentin. A decapeptide containing the sequence SSLN-LRETNL was also cleaved in vitro by HIV-1 PR as predicted. The presence of a charged residue (arginine) at the primary cleavage site distinguishes this from other known naturally occurring cleavage sites. Microinjection of HIV-1 PR into cultured human fibroblasts resulted in a 9-fold increase in the percentage of cells with an altered and abnormal distribution of vimentin intermediate filaments. Most commonly, the intermediate filaments collapsed into a clump with a juxtanuclear localization. These results support the possibility that intermediate filament proteins may serve as substrates within HIV-1-infected cells.

A radiometric assay for HIV-1 protease

A rapid, high-throughput radiometric assay for HIV-1 protease has been developed using ion-exchange chromatography performed in 96-well filtration plates. The assay monitors the activity of the HIV-1 protease on the radiolabeled form of a heptapeptide substrate, [tyrosyl-3,5-3H]Ac-Ser-Gln-Asn-Tyr-Pro-Val-Val-NH2, which is based on the p17-p24 cleavage site found in the viral polyprotein substrate Pr55gag. Specific cleavage of this uncharged heptapeptide substrate by HIV-1 protease releases the anionic product [tyrosyl-3,5-3H]Ac-Ser-Gln-Asn-Tyr, which is retained upon minicolumns of the anion-exchange resin AG1-X8. Protease activity is determined from the recovery of this radiolabeled product following elution with formic acid. This facile and highly sensitive assay may be utilized for steady-state kinetic analysis of the protease, for measurements of enzyme activity during its purification, and as a routine assay for the evaluation of protease inhibitors from natural product or synthetic sources.

Sub-site preferences of the aspartic proteinase from the human immunodeficiency virus, HIV-1

A series of synthetic, chromogenic substrates for HIV-1 proteinase with the general structure Ala-Thr-His-Xaa-Yaa-Zaa*Nph-Val-Arg-Lys-Ala was synthesised with a variety of residues introduced into the Xaa, Yaa and Zaa positions. Kinetics parameters for hydrolysis of each peptide by HIV-1 proteinase at pH 4.7, 37 degrees C and u = 1.0 M were measured spectrophotometrically and/or by reverse phase FPLC. A variety of residues was found to be acceptable in the P3 position whilst hydrophobic/aromatic residues were preferable in P1. The nature of the residue occupying the P2 position had a strong influence on kcat (with little effect on Km); beta-branched residues Val or Ile in this position resulted in considerably faster peptide hydrolysis than when e.g. the Leu-containing analogue was present in P2.

Proteases from human immunodeficiency virus and avian myeloblastosis virus show distinct specificities in hydrolysis of multidomain protein substrates

The virally encoded proteases from human immunodeficiency virus (HIV) and avian myeloblastosis virus (AMV) have been compared relative to their ability to hydrolyze a variant of the three-domain Pseudomonas exotoxin, PE66. This exotoxin derivative, missing domain I and referred to as LysPE40, is made up of a 13-kilodalton NH2-terminal translocation domain II connected by a segment of 40 amino acids to enzyme domain III of the toxin, a 23-kilodalton ADP-ribosyltransferase. HIV protease hydrolyzes two peptide bonds in LysPE40, a Leu-Leu bond in the interdomain region and a Leu-Ala bond in a nonstructured region three residues in from the NH2-terminus. Neither of these sites is cleaved by the AMV enzyme; hydrolysis occurs, instead, at an Asp-Val bond in another part of the interdomain segment and at a Leu-Thr bond in the NH2-terminal region of domain II. Synthetic peptides corresponding to these cleavage sites are hydrolyzed by the individual proteases with the same specificity displayed toward the protein substrate. Peptide substrates for one protease are neither substrates nor competitive inhibitors for the other. A potent inhibitor of HIV type 1 protease was more than 3 orders of magnitude less active toward the AMV enzyme. These results suggest that although the crystallographic models of Rous sarcoma virus protease (an enzyme nearly identical to the AMV enzyme) and HIV type 1 protease show a high degree of similarity, there exist structural differences between these retroviral proteases that are clearly reflected by their kinetic properties.

A solid phase assay for the protease of human immunodeficiency virus

A solid phase assay for human immunodeficiency virus (HIV) protease using an immobilized substrate, Affi Gel 10-Gly-Gly-Gly-Gly-Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val-Gln-[3H]Gly-OH has been devised. The Tyr-Pro bond of the substrate was hydrolyzed by the protease, releasing the radiolabeled cleavage product, Pro-Ile-Val-Gln-[3H]Gly-OH, into the supernatant. The pH optimum was found to be 6.0, and a high ionic strength was required for maximal activity. The solid phase assay is usable for convenient monitoring of purification procedures, and rapid screening of inhibitors of HIV protease.

Selective phosphinate transition-state analogue inhibitors of the protease of human immunodeficiency virus

The phosphinic acid isosteres of di-, tetra- and hexapeptides containing a hydrophobic amino acid side chains at the P1-P'1 positions are powerful inhibitors of Human Immunodeficiency Virus protease. Ki's ranged from 0.4 nM to 26 microM at pH 6.5 and were lower at pH 4.5. The compounds showed no activity against trypsin, weak activity against renin at pH 6.5, moderate activity against pepsin at pH 2.0 (Ki values in the microM range) and substantial activity against cathepsin D at pH 3.5 (Ki values from 9 to 300 nM).

A fluorometric assay for HIV-protease activity using high-performance liquid chromatography

A rapid sensitive method for the quantification of in vitro HIV-protease activity has been developed on the basis of the endoproteolytic conversion of N-Dns-SQ-NYPIV to N-Dns-SQNY. The use of the N-dansyl group as a fluorescence label was shown to not significantly alter the apparent kinetic parameters for the peptide-enzyme interaction. Using fluorescence detection, the dansylated product and unconverted substrate are detected in a single rapid (3 min) isocratic reverse-phase HPLC separation in quantities as low as 0.2 pmol. The method is highly reproducible and suited to a variety of applications including the analysis of large sample numbers and rigorous enzymological studies.

Rational design of peptide-based HIV proteinase inhibitors

A series of peptide derivatives based on the transition-state mimetic concept has been designed that inhibit the proteinase from the human immunodeficiency virus (HIV). The more active compounds inhibit both HIV-1 and HIV-2 proteinases in the nanomolar range with little effect at 10 micromolar against the structurally related human aspartic proteinases. Proteolytic cleavage of the HIV-1 gag polyprotein (p55) to the viral structural protein p24 was inhibited in chronically infected CEM cells. Antiviral activity was observed in the nanomolar range (with one compound active below 10 nanomolar) in three different cell systems, as assessed by p24 antigen and syncytium formation. Cytotoxicity was not detected at 10 and 5 micromolar in C8166 and JM cells, respectively, indicating a high therapeutic index for this new class of HIV proteinase inhibitors.

Chromophoric peptide substrates for the spectrophotometric assay of HIV-1 protease

Purified HIV-1 protease hydrolyzes H-Ser-Gln-Asn-Leu-Phe(NO2)-Leu-Asp-Gly-NH2 (Peptide 1) and acetyl-Arg-Lys-Ile-Leu-Phe(NO2)-Leu-Asp-Gly-NH2 (Peptide 2) between the (p-nitro)phenylalanyl and leucyl residues. The cleavage of Peptides 1 and 2 resulted in a decrease in uv absorbance at 310 nm. The HIV-1 protease-catalyzed peptidolysis of Peptides 1 and 2 was characterized by a linear time course at substrate turnover of less than 20%. The solubilities of these substrates at pH 5.0 were sufficient to provide initial rate measurements over a concentration range of 0.05-0.5 mM. Steady-state kinetic data and inhibition constants using both spectrophotometric and high performance liquid chromatography (HPLC) analysis of the peptidolysis of these substrates resulted in comparable values.

Modulation of the affinity of aspartic proteases by the mutated residues in active site models

The active sites of 3 types of aspartic proteases are modeled, based on crystallographic coordinates of endothiapepsin and of a model of HIV-1 protease. The enthalpies of deprotonation from neutral to mono-anion and to dianion are calculated with semiempirical minimal neglect of differential overlap, hydrogen bonding corrected (MNDO/H). This quantum mechanical study of models for the active sites of pepsins, human renin and retroviral aspartic proteases demonstrates that the replacements of Thr-218 from pepsins by Ala in human renin and of both Ser-35 and Thr-218 by alanines in retroviral proteases increases the proton affinity and modulates the charge distribution of those active sites compared to the pepsins.

Novel fluorogenic substrates for assaying retroviral proteases by resonance energy transfer

The 11-kD protease (PR) encoded by the human immunodeficiency virus 1 (HIV-1) is essential for the correct processing of viral polyproteins and the maturation of infectious virus, and is therefore a target for the design of selective acquired immunodeficiency syndrome (AIDS) therapeutics. To facilitate the identification of novel inhibitors of HIV-1 PR, as well as to permit detailed studies on the enzymology and inhibition of this enzyme, a continuous assay for its activity was developed that was based on intramolecular fluorescence resonance energy transfer (RET). The assay used the quenched fluorogenic substrate 4-(4-dimethylaminophenylazo)benzoic acid (DABCYL)--Ser Gln Asn Tyr Pro Ile Val Gln--5-[(2-aminoethyl)amino]naphthalene-1 sulfonic acid (EDANS), whose peptide sequence is derived from a natural processing site for HIV-1 PR. Incubation of recombinant HIV-1 PR with the fluorogenic substrate resulted in specific cleavage at the Tyr-Pro bond and a time-dependent increase in fluorescence intensity that was linearly related to the extent of substrate hydrolysis. An internally quenched fluorogenic substrate was also designed that was selectively cleaved by the related PR from avian myeloblastosis virus (AMV). The fluorescence quantum yields of the HIV-1 PR and AMV PR substrates in the RET assay increased by 40.0- and 34.4-fold, respectively, per mole of substrate cleaved. Because of its simplicity, rapidity, and precision in the determination of reaction rates required for kinetic analysis, this method offers many advantages over the commonly used high-performance liquid chromatography- or electrophoresis-based assays for peptide substrate hydrolysis by retroviral PRs.

The selectivity of statine-based inhibitors against various human aspartic proteinases

The interactions of five human enzymes (renin, pepsin, gastricsin, cathepsin D and cathepsin E) and the aspartic proteinase from Endothia parasitica with several series of synthetic inhibitors were examined. All of the inhibitors contained the dipeptide analogue statine or its phenylalanine or cyclohexylalanine homologues in the P1-P1' positions. The residues occupying the peripheral sub-sites (P4 to P3') were varied systematically and inhibitory constants were determined for the interactions with each of the proteinases. Inhibitors were elucidated that specifically inhibited human renin and did not affect any of the other human enzymes or the fungal proteinase. With suitable selection of residues to occupy individual sub-sites, effective inhibitors of specific human aspartic proteinases may now be designed.

A synthetic HIV-1 protease inhibitor with antiviral activity arrests HIV-like particle maturation

A synthetic peptidemimetic substrate of the human immunodeficiency virus 1 (HIV-1) protease with a nonhydrolyzable pseudodipeptidyl insert at the protease cleavage site was prepared. The peptide U-81749 inhibited recombinant HIV-1 protease in vitro (inhibition constant Ki of 70 nanomolar) and HIV-1 replication in human peripheral blood lymphocytes (inhibitory concentration IC50 of 0.1 to 1 micromolar). Moreover, 10 micromolar concentrations of U-81749 significantly inhibited proteolysis of the HIV-1 gag polyprotein (p55) to the mature viral structural proteins p24 and p17 in cells infected with a recombinant vaccinia virus expressing the HIV-1 gag-pol genes. The HIV-1 like particles released from inhibitor-treated cells contained almost exclusively p55 and other gag precursors, but not p24. Incubation of HIV-like particles recovered from drug-treated cultures in drug-free medium indicated that inhibition of p55 proteolysis was at least partially reversible, suggesting that U-81749 was present within the particles.

Substrate analogue inhibition and active site titration of purified recombinant HIV-1 protease

The aspartyl protease of human immunodeficiency virus 1 (HIV-1) has been expressed in Escherichia coli at high levels, resulting in the formation of inclusion bodies which contain denatured insoluble aggregates of the protease. After solubilization of these inclusion bodies in guanidinium chloride, the protease was purified to apparent homogeneity by a single-step reverse-phase HPLC procedure. The purified, but inactive, protein was denatured in 8 M urea and refolded to produce the active protease. Enzyme activity was demonstrated against the substrate H-Val-Ser-Gln-Asn-Tyr-Pro-Ile-Val-OH, modeled after the cleavage region between residues 128 and 135 in the HIV gag polyprotein. With this substrate, a Vmax of 1.3 +/- 0.2 mumol/(min.mg) and KM of 2.0 +/- 0.3 mM were determined at pH 5.5. Pepstatin (Iva-Val-Val-Sta-Ala-Sta-OH) and substrate analogues with the Tyr-Pro residues substituted by Sta, by Phe psi [CH2N]Pro, and by Leu psi [CH(OH)CH2]Val inhibited the protease with KI values of 360 nM, 3690 nM, 3520 nM, and less than 10 nM, respectively. All were competitive inhibitors, and the tightest binding compound provided an active site titrant for the quantitative determination of enzymatically active HIV-1 protease.

Evaluation of homology modeling of HIV protease

The model of human immunodeficiency virus (HIV-1) protease which was based on the crystal structure of Rous sarcoma virus (RSV) protease has been compared to the recently determined crystal structure of chemically synthesized HIV-1 protease. The overall difference between the model and crystal structure was 1.4 A root mean square (rms) deviation for 86 superimposed C alpha atoms. The position of the flexible flap differs in the model and six residues at the amino terminus were incorrectly placed. With these exceptions, all atoms of the model and crystal structure agree to 2.1 A rms deviation. The conformation of some surface bends in the model agrees less well with the crystal structure. Identical amino acids in RSV and HIV proteases were modeled more reliably than different types of amino acids. The amino acids which form the substrate binding site were modeled most accurately to 1.2 A rms deviation for all atoms compared to the crystal structure. This suggests that functionally significant regions of related proteins can be modeled with high accuracy. The model gave correct predictions for residues making interactions with the substrate, and therefore could be used to design inhibitors. The model based on the RSV protease structure is more similar to the experimental structure than are previous models based on the structures of non-viral aspartic proteases.

Inhibition of the aspartic proteinase from HIV-2

Kinetic constants were determined for the interaction of the HIV-2 aspartic proteinase with a synthetic substrate and a number of inhibitors at several pH values. Acetyl-pepstatin was more effective towards HIV-2 proteinase than the renin inhibitor, H-261; this effect is exactly the opposite from that observed previously for the proteinase from the HIV-1 AIDS virus.

Conserved folding in retroviral proteases: crystal structure of a synthetic HIV-1 protease

The rational design of drugs that can inhibit the action of viral proteases depends on obtaining accurate structures of these enzymes. The crystal structure of chemically synthesized HIV-1 protease has been determined at 2.8 angstrom resolution (R factor of 0.184) with the use of a model based on the Rous sarcoma virus protease structure. In this enzymatically active protein, the cysteines were replaced by alpha-amino-n-butyric acid, a nongenetically coded amino acid. This structure, in which all 99 amino acids were located, differs in several important details from that reported previously by others. The interface between the identical subunits forming the active protease dimer is composed of four well-ordered beta strands from both the amino and carboxyl termini and residues 86 to 94 have a helical conformation. The observed arrangement of the dimer interface suggests possible designs for dimerization inhibitors.