Solid-contact polymeric membrane electrodes with detection limits in the subnanomolar range

High-temperature potentiometry: modulated response of ion-selective electrodes during heat pulses

The concept of locally heated polymeric membrane potentiometric sensors is introduced here for the first time. This is accomplished in an all solid state sensor configuration, utilizing poly(3-octylthiophene) as the intermediate layer between the ion-selective membrane and underlying substrate that integrates the heating circuitry. Temperature pulse potentiometry (TPP) gives convenient peak-shaped analytical signals and affords an additional dimension with these sensors. Numerous advances are envisioned that will benefit the field. The heating step is shown to give an increase in the slope of the copper-selective electrode from 31 to 43 mV per 10-fold activity change, with a reproducibility of the heated potential pulses of 1% at 10 microM copper levels and a potential drift of 0.2 mV/h. Importantly, the magnitude of the potential pulse upon heating the electrode changes as a function of the copper activity, suggesting an attractive way for differential measurement of these devices. The heat pulse is also shown to decrease the detection limit by half an order of magnitude.

Potentiometric determination of trace amounts of amantadine using a modified carbon-paste electrode

A chemically modified carbon-paste electrode has been described for the sensitive and selective determination of amantadine. Beta-cyclodextrin was used as modifier. The electrode shows a sub-Nernstian response of 51.0 +/- 1.0 mV decade(-1) for amantadine in the concentration range of 6.3 x 10(-10)-7.1 x 10(-7) M at 25 degrees C. The optimum pH value was maintained at 4.5 using a 0.02 M acetate buffer. The limit of detection of the electrode was 6.3 x 10(-10) M of amantadine. The electrode responded very rapidly (<60 s) to changes in the concentration of amantadine, and its lifetime was more than three months. The relative standard deviation of measurements for a 2.0 x 10(-7) M of amantadine was 0.68% (n = 7). The application of a modified carbon-paste electrode to the determination of amantadine in its pharmaceutical preparations showed a relative error of 2%. The recovery of amantadine (2.5 x 10(-8) M) from a blood-serum sample was 94%.

Interpretation of chronopotentiometric transients of ion-selective membranes with two transition times

Passing currents through ion-selective membranes has contributed to the development of a variety of novel methods. In this work, chronopotentiometric (CP) transients with two transition times (breakpoints) are presented for the first time, with the theoretical interpretation of such voltage transients. The validity of our theory has been confirmed in experiments utilizing ETH 5294 chromoionophore-based pH sensitive membranes with and without lipophilic background electrolyte and ETH 5234 ionophore-based calcium selective membranes in which the ionophore forms 3:1 complexes with Ca(2+) ions. The conditions under which two breakpoints can be identified in the chronopotentiometric voltage transients are discussed.Spectroelectrochemical microscopy (SpECM) is used to show that the two breakpoints in the CP curves emerge approximately when the free ionophore and ion-ionophore complex concentrations approach zero at the opposite membrane-solution interfaces. The two breakpoint times can be utilized to follow simultaneously the concentration changes of the free ionophore, the ion-ionophore complex, and the mobile anionic sites in cation-selective membranes. In membranes with known composition, the time instances where breakpoints occur can be used to estimate the free ionophore and the ion-ionophore complex diffusion coefficients.

Ionophore-gold nanoparticle conjugates for Ag(+)-selective sensors with nanomolar detection limit

We report on the synthesis and trace analytical application of ionophore-gold nanoparticle conjugates as a basis of a new concept in confining ionophores to ion-selective membranes using inert nanoparticle carriers.

Limitations of current polarization for lowering the detection limit of potentiometric polymeric membrane sensors

Ion fluxes across polymeric ion-selective membranes are a decisive parameter dictating the lower detection limit of potentiometric ion sensors. An applied current was earlier proposed to counteract such fluxes and reduce the detection limit to ultratrace levels. So far, however, the method has not been used in practical situations since the correct current amplitude requires prior knowledge of the sample composition. This paper explores the use of the stir effect to evaluate the optimal current by theory and experiments. It is shown that the traditionally used steady-state model assuming a uniform distribution of ion exchanger in the membrane, fixed with time, violates the electroneutrality condition. A modified steady-state model is introduced that allows for a concentration tilt of the ion exchanger and predicts that a stir effect can indeed be utilized to find the optimal current. Ideally, by choosing the optimal current and very long measurement times, the thermodynamic detection limit might be obtained. However, in practice the stir effect declines at low concentrations and the conditions are far from steady state. Therefore, the improvement of the lower detection limit achievable by galvanostatic control is only about 1 order of magnitude. A numerical finite-difference approximation is shown to trace the experimental potential responses of silver-selective electrodes well and to reproduce the stir effect adequately, even for different conditioning protocols. The stir effect is successfully used to improve the detection limit of electrodes with ill-optimized inner solutions; however, significant improvements beyond what is commonly feasible by chemical optimization does not seem to be easily achievable. The results indicate that with conventional membranes the possibility of improving the detection limit by current polarization is much more limited than assumed so far.

Wearable technology for bio-chemical analysis of body fluids during exercise

This paper details the development of a textile based fluid handling system with integrated wireless biochemical sensors. Such research represents a new advancement in the area of wearable technologies. The system contains pH, sodium and conductivity sensors. It has been demonstrated during on-body trials that the pH sensor has close agreement with measurements obtained using a reference pH probe. Initial investigations into the sodium and conductivity sensors have shown their suitability for integration into the wearable system. It is thought that applications exist in personal health and sports performance and training.

Subnanomolar Detection Limit Application of Ion-Selective Electrodes with Three-Dimensionally Ordered Macroporous (3DOM) Carbon Solid Contacts

Solid-contact ion-selective electrodes (SC-ISEs) can exhibit very low detection limits and, in contrast to conventional ISEs, do not require an optimization of the inner filling solution. This work shows that subnanomolar detection limits can also be achieved with SC-ISEs with three-dimensionally ordered macroporous (3DOM) carbon contacts, which have been shown recently to exhibit excellent long-term stabilities and good resistance to the interferences from oxygen and light. The detection limit of 3DOM carbon-contacted electrodes with plasticized poly(vinyl chloride) as membrane matrix can be improved with a high polymer content of the sensing membrane, a large ratio of ionophore and ionic sites, and conditioning with a low concentration of analyte ions. This permits detection limits as low as 1.6×10(-7) M for K(+) and 4.0×10(-11) M for Ag(+).

Backside calibration chronopotentiometry: using current to perform ion measurements by zeroing the transmembrane ion flux

A recent new direction in ion-selective electrode (ISE) research utilizes a stir effect to indicate the disappearance of an ion concentration gradient across a thin ion-selective membrane. This zeroing experiment allows one to evaluate the equilibrium relationship between front and backside solutions contacting the membrane by varying the backside solution composition. This method is attractive since the absolute potential during the measurement is not required, thus avoiding standard recalibrations from the sample solution and a careful control of the reference electrode potential. We report here on a new concept to alleviate the need to continuously vary the composition of the backside solution. Instead, transmembrane ion fluxes are counterbalanced at an imposed critical current. A theoretical model illustrates the relationship between the magnitude of this critical current and the concentration of analyte and countertransporting ions and is found to correspond well with experimental results. The approach is demonstrated with lead(II)-selective membranes and protons as dominating interference ions, and the concentration of Pb(2+) was successfully measured in tap water samples. The principle was further evaluated with calcium-selective membranes and magnesium as counterdiffusing species, with good results. Advantages and limitations arising from the kinetic nature of the perturbation technique are discussed.

Elimination of undesirable water layers in solid-contact polymeric ion-selective electrodes

This study aimed to develop a novel approach for the production of analytically robust and miniaturized polymeric ion sensors that are vitally important in modern analytical chemistry (e.g., clinical chemistry using single blood droplets, modern biosensors measuring clouds of ions released from nanoparticle-tagged biomolecules, laboratory-on-a-chip applications, etc.). This research has shown that the use of a water-repellent poly(methyl methacrylate)/poly(decyl methacrylate) (PMMA/PDMA) copolymer as the ion-sensing membrane, along with a hydrophobic poly(3-octylthiophene 2,5-diyl) (POT) solid contact as the ion-to-electron transducer, is an excellent strategy for avoiding the detrimental water layer formed at the buried interface of solid-contact ion-selective electrodes (ISEs). Accordingly, it has been necessary to implement a rigorous surface analysis scheme employing electrochemical impedance spectroscopy (EIS), in situ neutron reflectometry/EIS (NR/EIS), secondary ion mass spectrometry (SIMS), and small-angle neutron scattering (SANS) to probe structurally the solid-contact/membrane interface, so as to identify the conditions that eliminate the undesirable water layer in all solid-state polymeric ion sensors. In this work, we provide the first experimental evidence that the PMMA/PDMA copolymer system is susceptible to water "pooling" at the interface in areas surrounding physical imperfections in the solid contact, with the exposure time for such an event in a PMMA/PDMA copolymer ISE taking nearly 20 times longer than that for a plasticized poly(vinyl chloride) (PVC) ISE, and the simultaneous use of a hydrophobic POT solid contact with a PMMA/PDMA membrane can eliminate totally this water layer problem.

Synthesis and Characterization of High Integrity Solid-Contact Polymeric Ion Sensors

High integrity solid-contact (SC) polymeric ion sensors have been produced by using spin casting and electropolymerization techniques in the preparation of the SC employing the conductive polymer, poly(3-octylthiophene) [POT]. The physical and chemical integrity of the POT SCs have been evaluated using scanning electron microscopy (SEM), atomic force microscopy (AFM), secondary ion mass spectrometry (SIMS) and X-ray photoelectron spectroscopy (XPS). Furthermore, the electrochemical stability of SC polymeric ion sensors has been investigated using electrochemical impedance spectroscopy (EIS). The results of this study demonstrate that electropolymerization and spin casting methods also comprising annealing of the synthesized SC film are capable of producing SCs that are relatively free of imperfections such as pores and pinholes. This leads to electrochemically stable and robust polymeric ion sensors where the SC/sensor interface is resistant to the formation of a detrimental water layer that normally gives rise to spurious ion fluxes and a degradation in the sensitivity and selectivity of the SC polymeric ion sensor.

Evidence of a water layer in solid-contact polymeric ion sensors

This paper presents the very first direct structural evidence for the formation of a 100 +/- 10 A water layer in coated-wire polymeric-membrane ion-selective electrodes (ISEs).

Composite polyacrylate-poly(3,4- ethylenedioxythiophene) membranes for improved all-solid-state ion-selective sensors

A novel type of self-plasticizing polyacrylate-based membrane was developed for all-solid-state ion-selective potentiometric electrodes. The membrane composition contains a conducting polymer (CP): poly(3,4-ethylenedioxythiophene) end capped with methacrylate groups, chemically grafted with the membrane during the photopolymerization step. This composition results in ion-selective membranes with the following advantages: lower electrical resistance compared to the CP-free membrane, facile ion-to-electron transduction between the membrane and the electrode support, controlled low activity of analyte ions, and high concentration of interferent ions (incorporated with the CP) within the membrane, potentially resulting in improved analytical parameters. Ca2+- and K+-selective membranes were chosen as model systems to study the effect of pretreatment and CP content on the potentiometric sensor's characteristics. For Ca2+ sensors, reproducible and stable Nernstian characteristics were obtained within the range from 0.1 to 10(-9) M CaCl2, without a time-consuming preconditioning step. For K+-selective sensors, the influence on Nernstian response range was observed for varying KCl concentrations in the conditioning solution, with the lowest detection limit found close to 10(-8) M KCl. Mass spectrometry coupled with laser ablation studies of the membranes revealed that in this case the detection limit is not related to primary ion content in the membrane contacting a sample solution, but is affected by interfering ion concentration close to the membrane surface.

Potassium-selective electrodes with stable and geometrically well-defined internal solid contact based on nanoparticles of polyaniline and plasticized poly(vinyl chloride)

Solid contact potassium-selective electrodes with the internal ion-to-electron transduction layer composed of plasticized poly(vinyl chloride) (PVC) and 2-20% (m/m) of polyaniline (PANI) nanoparticles, with the mean particle size of 8 nm, have been studied in this paper. UV-vis measurements in pH buffer solutions between pH 0 and 12 show that the electrically conducting emeraldine salt (ES) form of PANI has exceptionally good pH stability. Membranes of PANI nanoparticles were mainly in the ES form even at pH 12, in contrast to electrochemically prepared PANI(Cl) films, which are converted completely to the nonconducting form already at pH 6. Long-term UV-vis measurements with the PANI membranes in contact with aqueous buffer solution at pH 7.5 showed no degradation of the ES form. The PANI nanoparticles are homogenously mixed in the PVC-based solid contact (SC) layer. Only the uppermost part of the SC layer is to a minor extent dissolved in the outer potassium-selective PVC membrane. This enabled the preparation of geometrically well-defined inner SC layers, thus improving the reproducibility of the solid contact electrodes and resulting in good mechanical strength between the inner and outer membranes.

Potentiometry at trace levels in confined samples: ion-selective electrodes with subfemtomole detection limits

We explore here for the first time the direct potentiometric detectability of calcium, lead, and silver ions in amounts on the order of 300 attomoles at 100 picomolar concentrations without any preconcentration, analyte recycling, or electrocatalytic signal enhancement. The results presented here place zero-current potentiometry among the most sensitive electrochemical methods available.

Improving the detection limits of antispasmodic drugs electrodes by using modified membrane sensors with inner solid contact

Three coated wire electrodes (CWEs) for the antispasmodic drugs; dicyclomine (Dc), mebeverine (Mv) and drotaverine (Dv) hydrochlorides were developed. Each electrode based on ion-associate of a heteropoly anion with the drug cation incorporated in membrane sensor modified with graphite and deposited on silver internal solid contact. The influence of addition of graphite to the membranes and the type of the internal solid contact on the potentiometric responses of the electrodes was investigated. The characteristics of the new electrodes were compared to the characteristics of previously reported traditional liquid inner contact electrodes of the same drugs. The lower detection limits of the proposed electrodes were somewhat better than those observed with the corresponding liquid contact ISEs and reached (1.2-2.0)x10(-7)M. The potentiometric selectivity of the CWEs revealed a significant improvement and much faster response times compared to the liquid contact ISEs. The practical utility of each electrode has been demonstrated by using it successfully in potentiometric determination of its respective drug in pharmaceutical preparations both in batch and flow injection conditions. Each electrode was also used as an indicator electrode in the potentiometric titration of the drug against standard silicotungstic acid and in potentiometric determination of the drug concentration in urine samples.

Solid contact potentiometric sensors for trace level measurements

A simple procedure for the development of a range of polymeric ion-selective electrodes (ISEs) with low detection limits is presented. The electrodes were prepared by using a plasticizer-free methyl methacrylate-decyl methacrylate copolymer as membrane matrix and poly(3-octylthiophene) as intermediate layer deposited by solvent casting on gold sputtered copper electrodes as a solid inner contact. Five different electrodes were developed for Ag+, Pb2+, Ca2+, K+, and I-, with detection limits mostly in the nanomolar range. In this work, the lowest detection limits reported thus far with solid contact ISEs for the detection of silver (2.0 x 10(-9) M), potassium (10(-7) M), and iodide (10(-8) M) are presented. The developed electrodes exhibited a good response time and excellent reproducibility.

Monolithic capillary-based ion-selective electrodes

Poly(styrene-co-divinylbenzene)-based monolithic capillaries of an inner diameter of 200 mum and a length of 2-5 mm have been used to construct Ca2+-, Ag+-, and Na+-selective electrodes. The membranes consist of a solution of ionophore and ion exchanger in bis(2-ethylhexyl) sebacate or 2-nitrophenyl octyl ether, which are used as plasticizers in conventional PVC-based membranes. With capillaries of low porosity, the potentiometric responses down to 10(-8)-10(-9) M solutions do not depend on the composition of the internal solution, which indicates a strong suppression of transmembrane ion fluxes. Thus, no tedious optimization of the inner solution is required with monolith ISEs. The lower detection limits of Ag+- and Ca2+-ISEs are comparable to the best ones obtained earlier with optimized inner solutions. Additionally, a monolithic Na+-selective ISE has been obtained exhibiting a lower detection limit of 3 x 10(-8) M Na+. With monolithic capillaries of higher porosity and fused-silica GC capillaries, the transmembrane flux effects are noticeable but still significantly smaller than with conventional PVC membranes.

Modern potentiometry

For most chemists, potentiometry with ion-selective electrodes (ISEs) primarily means pH measurements with a glass electrode. Those interested in clinical analysis might know that ISEs, routinely used for the determination of blood electrolytes, have a market size comparable to that of glass electrodes. It is even less well known that potentiometry went through a silent revolution during the past decade. The lower detection limit and the discrimination of interfering ions (the selectivity coefficients) have been improved in many cases by factors up to 10(6) and 10(10), respectively, thus allowing their application in fields such as environmental trace analysis and potentiometric biosensing. The determination of complex formation constants for lipophilic hosts and ionic guests is also covered in this Minireview.

Voltammetric Heparin-Selective Electrode Based on Thin Liquid Membrane with Conducting Polymer-Modified Solid Support

A novel, solid-supported voltammetric ion-selective electrode to detect anticoagulant/antithrombotic heparin at polarizable poly(vinyl chloride) (PVC) membrane/water interfaces was developed. An approximately 3-4.5-microm-thick PVC membrane plasticized with 2-nitrophenyl octyl ether was supported on a gold electrode modified with a poly(3-octylthiophene) (POT) film as an ion-to-electron transducer. Charge transport through the PVC-covered POT film is electrochemically reversible, as demonstrated by cyclic voltammetry with nonpolarizable membrane/water interfaces. In addition to the fast charge transport, adequate redox capacity of the POT film and a small ohmic potential drop in the thin PVC membrane enable ion transfer voltammetry at polarizable macroscopic membrane/water interfaces in a standard three-electrode cell. Reversible ClO4- transfer at the interfaces coupled with oxidation of a neutral POT film was examined by cyclic voltammetry to determine the distribution of the applied potential to the two polarizable interfaces by convolution technique. Interfacial adsorption and desorption of heparin facilitated by octadecyltrimethylammonium were studied also by cyclic voltammetry and convolution technique to demonstrate that the processes are electrochemically irreversible. Stripping voltammetry based on the interfacial processes gives a low detection limit of 0.005 unit/mL heparin in a saline solution, which is slightly lower than the detection limit of most sensitive heparin sensors reported so far (0.01 unit/mL).

Approaches to Improving the Lower Detection Limit of Polymeric Membrane Ion-Selective Electrodes

More than ten different approaches for improving the lower detection limit of polymeric membrane ion-selective electrodes have been suggested during the recent years. In this contribution, their principles are briefly summarized with a focus to their general practical applicability. The methods that are the most rugged and the easiest to implement in a routine laboratory will be highlighted.

Effect of interferents present in the internal solution or in the conducting polymer transducer on the responses of ion-selective electrodes

The effect of interferents present on the opposite side of the Pb2+-selective membrane has been studied for both internal solution and all-solid-state sensors with a conducting polymer (CP) transducer. For interferents with moderate selectivity coefficients (sodium cations) present in the internal solution or in the CP transducer phase, super-Nernstian responses were obtained. For sensors containing strongly discriminated interferents (lithium ions), however, responses typical of conventional electrodes are observed, despite the low activity of primary ions on the opposite side of the membrane. This effect is attributed to hindered incorporation of interfering ions into the membrane, which also impairs the long term stability of the potential. Because of the relatively small absolute amounts of interferents in the transducer of all-solid-state sensors, their exchange for primary ions occurs quickly. Thus, transformation of the sensor to one with a micromolar detection limit and high potential stability is observed.

Optimizing the analytical performance and construction of ion-selective electrodes with conducting polymer-based ion-to-electron transducers

All-solid-state ion-selective electrodes that use a conducting polymer as the ion-to-electron transducer have emerged as one of the most promising classes of all-solid-state potentiometric sensors in recent years. This is largely because it has many analytical advantages, including high response stability, which is unique in the field of internal-solution-free ion-selective electrodes. This paper reviews the considerable progress that has been made in this area of sensing in recent years, in terms of detection limits, selectivity coefficients and novel construction methods.

Fiber-Optic Microsensor Array Based on Fluorescent Bulk Optode Microspheres for the Trace Analysis of Silver Ions

An optical microsensor array is described for the rapid analysis of silver ions at low parts per trillion levels. Because the ionophore o-xylylenebis(N,N-diisobutyldithiocarbamate) (Cu-I) was reevaluated and shown to exhibit excellent selectivity for silver ions, ion-selective electrode (ISE) membranes were optimized and found to exhibit the lowest reported detection limit so far (3 x 10(-10) M). A corresponding Ag+-selective fluorescent optical microsensor array for the rapid sensing of trace level Ag+ was then developed. It was fabricated using plasticized PVC-based micrometer-scale fluorescent microspheres that were produced via a sonic particle casting device. They contained 156 mmol/kg Cu-I, 10 mmol/kg 9-(diethylamino)-5-[4-(15-butyl-1,13-dioxo-2,14-dioxanodecyl) phenylimino]benzo[a]phenoxazine (chromoionophore VII, ETH 5418), 2.3 mmol/kg 1,1' '-dioctadecyl-3,3,3',3'-tetramethylindocarbocyanine perchlorate (internal reference dye), and 14 mmol/kg sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate and were deposited onto the etched distal end of a 3200-microm-diameter optical fiber bundle. The microarray was characterized by fluorescence spectroscopy in samples containing 10(-12)-10(-8) M AgNO3 at pH 7.4, with selectivity characteristics comparable to the corresponding ISEs. The response time of the microsensor array was found to be less than 15 min for 10(-9) M AgNO3, which is drastically shorter than earlier data on optode films (8 h) and corresponding ISEs (30 min). A detection limit of 4 x 10(-11) M for Ag+ was observed, lower than any previously reported optode or silver-selective ISE. The microsensor array was applied for measurement of free silver levels in buffered pond water samples.