PVP-coated graphene oxide for selective determination of ochratoxin A via quenching fluorescence of free aptamer

Recent advances in aptasensors based on graphene and graphene-like nanomaterials

Graphene and graphene-like two-dimensional nanomaterials have aroused tremendous research interest in recent years due to their unique electronic, optical, and mechanical properties associated with their planar structure. Aptamers have exhibited many advantages as molecular recognition elements for sensing devices compared to traditional antibodies. The marriage of two-dimensional nanomaterials and aptamers has emerged many ingenious aptasensing strategies for applications in the fields of clinical diagnosis and food safety. This review highlights current advances in the development and application of two-dimensional nanomaterials-based aptasensors with the focus on two main signal-transducing mechanisms, i.e. electrochemical and optical. A special attention is paid to graphene, a one-atom thick layer of graphite with exceptional properties, representing a fastgrowing field of research. In view of the unique properties of two-dimensional nanostructures and their inherent advantages of synthetic aptamers, we expect that high-performance two-dimensional nanomaterials-based aptasensing devices will find extensive applications in environmental monitoring, biomedical diagnostics, and food safety.

Selection and characterization of a novel DNA aptamer for label-free fluorescence biosensing of ochratoxin A

Nucleic acid aptamers are emerging as useful molecular recognition tools for food safety monitoring. However, practical and technical challenges limit the number and diversity of available aptamer probes that can be incorporated into novel sensing schemes. This work describes the selection of novel DNA aptamers that bind to the important food contaminant ochratoxin A (OTA). Following 15 rounds of in vitro selection, sequences were analyzed for OTA binding. Two of the isolated aptamers demonstrated high affinity binding and selectivity to this mycotoxin compared to similar food adulterants. These sequences, as well as a truncated aptamer (minimal sequence required for binding), were incorporated into a SYBR® Green I fluorescence-based OTA biosensing scheme. This label-free detection platform is capable of rapid, selective, and sensitive OTA quantification with a limit of detection of 9 nM and linear quantification up to 100 nM.

Ultrasensitive fluorescence polarization aptasensors based on exonuclease signal amplification and polystyrene nanoparticle amplification

Here, we combine T7 exonuclease (T7 Exo) signal amplification and polystyrene nanoparticle (PS NP) amplification to develop novel fluorescence polarization (FP) aptasensors. The binding of a target/open aptamer hairpin complex or a target/single-stranded aptamer complex to dye-labeled DNA bound to PS NPs, or the self-assembly of two aptamer subunits (one of them labeled with a dye) into a target/aptamer complex on PS NPs leads to the cyclic T7 Exo-catalyzed digestion of the dye-labeled DNA or the dye-labeled aptamer subunit. This results in a substantial decrease in the FP value for the amplified sensing process. Our newly developed aptasensors exhibit a sensitivity five orders of magnitude higher than that of traditional homogeneous aptasensors and a high specificity for the target molecules. These distinct advantages of our proposed assay protocol make it a generic platform for the design of amplified aptasensors for ultrasensitive detection of various target molecules.

Label-free voltammetric aptasensor for the sensitive detection of microcystin-LR using graphene-modified electrodes

The development of successful biosensing platforms is highly dependent upon the biorecognition properties of the recognition receptor and the sensitivity of the transducer of the binding signal. The integration of the high affinity and specificity of DNA aptamers with the unique properties of the carbon nanomaterial graphene offers an excellent avenue for sensitive and selective biosensing architectures. In this work, a highly sensitive and selective aptasensor which utilizes an unlabeled DNA aptamer assembled on a graphene electrode for microcystin-LR detection was developed. A facile strategy was used for the aptasensor fabrication on the basis of the noncovalent assembly of DNA aptamer on graphene-modified screen printed carbon electrodes. Assembly of the DNA aptamer on the graphene-modified electrodes caused a marked drop in the square wave voltammetric reduction signal of the [Fe(CN)6](4-/3-) redox couple. The presence of microcystin-LR, on the other hand, caused a dose-responsive increase in peak current, allowing the quantification of microcystin-LR through the measurement of peak current change. Under optimal conditions, the detection limit of the developed aptasensor was 1.9 pM in buffer, a concentration much lower than those offered by previously reported biosensors for microcystin-LR. The developed aptasensor also exhibited excellent selectivity for microcystin-LR with no detectable cross-reactivity to okadaic acid, microcystin-LA, and microcystin-YR. Moreover, the proposed aptasensor has been applied for the analysis of spiked tap water and fish samples showing good recovery percentages. This novel, simple, high-performance, and low-cost detection platform would facilitate the routine monitoring of microcystin-LR in real samples.

Fluorescent sensors using DNA-functionalized graphene oxide

In the past few years, graphene oxide (GO) has emerged as a unique platform for developing DNA-based biosensors, given the DNA adsorption and fluorescence-quenching properties of GO. Adsorbed DNA probes can be desorbed from the GO surface in the presence of target analytes, producing a fluorescence signal. In addition to this initial design, many other strategies have been reported, including the use of aptamers, molecular beacons, and DNAzymes as probes, label-free detection, utilization of the intrinsic fluorescence of GO, and the application of covalently linked DNA probes. The potential applications of DNA-functionalized GO range from environmental monitoring and cell imaging to biomedical diagnosis. In this review, we first summarize the fundamental surface interactions between DNA and GO and the related fluorescence-quenching mechanism. Following that, the various sensor design strategies are critically compared. Problems that must be overcome before this technology can reach its full potential are described, and a few future directions are also discussed.

Selection and characterization of DNA aptamers against Staphylococcus aureus enterotoxin C1

Enterotoxins from pathogenic bacteria are known as the main reason that can cause the bacterial foodborne diseases. In this study, aptamers that bound to Staphylococcus aureus enterotoxin C1 (SEC1) with high affinity and selectivity were generated in vitro by twelve rounds of selection based on magnetic separation technology, with a low-level dissociation constant (Kd) value of 65.14 ± 11.64 nmol/L of aptamer C10. Aptamer-based quantification of SEC1 in the food sample by a graphene oxide (GO)-based method was implemented to investigate the potential of the aptamer against SEC1 with a limit of detection of 6 ng/mL. On the basis of this work, biosensors using the selected SEC1 aptamers as new molecular recognition elements could be applied for innovative determinations of SEC1.

Rapid aptasensor capable of simply diagnosing prostate cancer

Using guanine (G)-rich DNA aptamer-conjugated 6-carboxyfluorescein (6-FAM) capable of rapidly capturing prostate specific antigen (PSA) in human serum, cost-effective and simple biosensor with guanine chemiluminescence detection was developed for early diagnosis of prostate cancer. Free G-rich DNA aptamer-conjugated 6-FAM emits bright light in guanine chemiluminescence reaction based on the principle of chemiluminescent resonance energy transfer (CRET). However, G-rich DNA aptamer-conjugated 6-FAM bound with PSA cannot emit light because PSA acts as a strong interference in CRET between 6-FAM and high-energy intermediate formed from the reaction of 3,4,5-trimethoxylphenylglyoxal (TMPG) and guanine of G-rich DNA aptamer. A chemiluminescent biosensor, developed using the different properties of G-rich DNA aptamer-conjugated 6-FAM in the absence and presence of PSA in guanine chemiluminescence reaction, was able to quantify trace levels of PSA in human serum within 30 min without time-consuming and complicated procedures (e.g., multiple incubation and washings) required for conventional immunoassays operated with expensive and intractable antibodies. The limit of detection of chemiluminescent biosensor having a wide linear dynamic range (1.9-125 ng/ml) was 1.0 ng/ml. The excellent correlation (R=0.985) between chemiluminescent biosensor and conventional enzyme immunoassay indicates that the accurate, precise, and rapid chemiluminescent biosensor can be applied as a new method for early diagnosis of prostate cancer.

Capillary gel electrophoresis-coupled aptamer enzymatic cleavage protection strategy for the simultaneous detection of multiple small analytes

This novel, multi small-analyte sensing strategy is the result of combining the target-induced aptamer enzymatic protection approach with the CGE-LIF (capillary gel electrophoresis with laser-induced fluorescence) technique. The implemented assay principle is based on an analysis of the phosphodiesterase I (PDE I)-mediated size variation of a fluorescein-labeled aptamer (FApt), the enzyme catalyzing the removal of nucleotides from DNA in the 3' to 5' direction. In the absence of the target, the unfolded aptamer was enzymatically cleaved into short DNA fragments. Upon target binding, the DNA substrate was partially protected against enzymatic hydrolysis. The amount of bound aptamer remaining after the exonuclease reaction was proportional to the concentration of the target. The CGE technique, which was used to determine the separation of FApt species from DNA digested products, permitted the quantification of adenosine (A), ochratoxin A (O), and tyrosinamide (T) under the same optimized enzymatic conditions. This assay strategy was subsequently applied to the simultaneous detection of A, O, and T in a single capillary under buffered conditions using corresponding FApt probes of different lengths (23, 36, and 49 nucleotides, respectively). Additionally, the detection of these three small molecules was successfully achieved in a complex medium (diluted, heat-treated human serum) showing a good recovery. It is worth noting that the multiplexed analysis was accomplished for targets with different charge states by using aptamers possessing various structural features. This sensing platform constitutes a rationalized and reliable approach with an expanded potential for a high-throughput determination of small analytes in a single capillary.

Development of an aptamer-based impedimetric bioassay using microfluidic system and magnetic separation for protein detection

An aptamer-based impedimetric bioassay using the microfluidic system and magnetic separation was developed for the sensitive and rapid detection of protein. The microfluidic impedance device was fabricated through integrating the gold interdigitated array microelectrode into a flow cell made of polydimethylsiloxane (PDMS). Aptamer modified magnetic beads were used to capture and separate the target protein, and concentrated into a suitable volume. Then the complexes were injected into the microfluidic flow cell for impedance measurement. To demonstrate the high performance of this novel detection system, thrombin was employed as the target protein. The results showed that the impedance signals at the frequency of 90 kHz have a good linearity with the concentrations of thrombin in a range from 0.1 nM to 10nM and the detection limit is 0.01 nM. Compared with the reported impedimetric aptasensors for thrombin detection, this method possesses several advantages, such as the increasing sensitivity, improving reproducibility, reducing sample volume and assay time. All these demonstrate the proposed detection system is an alternative way to enable sensitive, rapid and specific detection of protein.

Optical aptasensors for quantitative detection of small biomolecules: a review

Aptasensors are aptamer-based biosensors with excellent recognition capability towards a wide range of targets. Specially, there have been ever-growing interests in the development of aptasensors for the detection of small molecules. This phenomenon is contributed to two reasons. On one hand, small biomolecules play an important role in living organisms with many kinds of biological function, such as antiarrhythmic effect and vasodilator activity of adenosine. On the other hand, the concentration of small molecules can be an indicator for disease diagnosis, for example, the concentration of ATP is closely associated with cell injury and cell viability. As a potential analysis tool in the construction of aptasensors, optical analysis has attracted much more interest of researchers due to its high sensitivity, quick response and simple operation. Besides, it promises the promotion of aptasensors in performance toward a new level. Review the development of optical aptasensors for small biomolecules will give readers an overall understanding of its progress and provide some theoretical guidelines for its future development. Hence, we give a mini-review on the advance of optical aptasensors for small biomolecules. This review focuses on recent achievements in the design of various optical aptasensors for small biomolecules, containing fluorescence aptasensors, colorimetric aptasensors, chemiluminescence aptasensors and other optical aptasensors.

Electrochemiluminescence recovery-based aptasensor for sensitive Ochratoxin A detection via exonuclease-catalyzed target recycling amplification

Based on the recovery of the quantum dot (QD) electrochemiluminescence (ECL) and exonuclease-catalyzed target recycling amplification, the development of a highly sensitive aptasensor for Ochratoxin A (OTA) detection is described. The duplex DNA probes containing the biotin-modified aptamer are immobilized on a CdTe QD composite film-coated electrode. The presence of the OTA target leads to effective removal of the biotin-aptamers from the electrode surface via exonuclease-catalyzed recycling and reuse of OTA, which prevents the attachment of streptavidin-alkaline phosphatase (STV-ALP) through biotin-STV interaction. The electron transfer (ET) from the excited state CdTe QD ([CdTe](⁎)) to the electro-oxidized species of the enzymatic product of ALP during the potential scan is thus inhibited and the QD ECL emission is restored for quantitative OTA detection. Due to the exonuclease-catalyzed target recycling amplification, the inhibition effect of ET is significantly enhanced to achieve sensitive detection of OTA down to 0.64 pg mL(-1). The proposed method is selective for OTA and can be used to monitor OTA in real red wine samples. Our developed ECL recovery-based aptasensor thus offers great potential for the development of new ECL sensing platforms for various target analytes.

A fluorescent aptasensor based on DNA-scaffolded silver-nanocluster for ochratoxin A detection

The selective detection of ultratrace amounts of ochratoxin A (OTA) is extremely important for food safety since it is one of the most toxic and widespread mycotoxin. Here we develop a signal-on fluorescent biosensor for detection of OTA based on fluorescent DNA-scaffolded silver-nanocluster (AgNCs), structure-switching of anti-OTA aptamer (Ap) and magnetic beads (MBs), and demonstrate its feasibility in the application of detecting OTA in real samples of wheat. The method exhibits superior sensitivity with a detection limit as low as 2 pg/mL OTA with high specificity. To the best of our knowledge, this is the first attempt to detect OTA based on DNA-scaffolded AgNCs, which possesses relatively high fluorescence quantum yield and photostability with regard to traditional organic dyes and quantum dots. Moreover, combined with the merits of MBs and aptamer, the proposed sensor has many advantages such as fabrication easiness, operation convenience, low cost, and being fast and portable, which may represent a promising path toward routine OTA control.

Development of an ultrasensitive aptasensor for the detection of aflatoxin B1

Contamination of feed and food by aflatoxin B1 (AFB1), one of the most toxic of the mycotoxins, is a global concern. To prevent food safety scares, and avoid subsequent economic losses due to the recall of contaminated items, methods for the rapid, sensitive and specific detection of AFB1 at trace levels are much in demand. In this work, a simple, ultrasensitive, and reliable aptasensor is described for the detection of AFB1. An AFB1 aptamer was used as a molecular recognition probe, while its complementary DNA played a role as a signal generator for amplification by real-time quantitative polymerase chain reaction (PCR). Under optimal conditions, a wide linear detection range (5.0 × 10(-5) to 5.0 ng mL(-1)) was achieved, with a high sensitivity (limit of detection (LOD)=25 fg mL(-1)). In addition, the proposed aptasensor exhibited excellent specificity for AFB1 compared with eight other mycotoxins, with no obvious Ct value change. This aptasensor can also be used in quantifying AFB1 levels in Chinese wild rye hay samples and infant rice cereal samples, demonstrating satisfactory recoveries in the range of 88-127% and 94-119%, respectively. This detection technique has a significant potential for high-throughput, quantitative determination of mycotoxin levels in a large range of feeds and foods.

Developing trends in aptamer-based biosensor devices and their applications

Aptamers are, in general, easier to produce, easier to store and are able to bind to a wider variety of targets than antibodies. For these reasons, aptamers are gaining increasing popularity in environmental monitoring as well as disease detection and disease management applications. This review article examines the research and design of RNA and DNA aptamer based biosensor systems and applications as well as their potential for integration in effective biosensor devices. As single stranded DNA or RNA molecules that can bind to specific targets, aptamers are well suited for biomolecular recognition and sensing applications. Beyond being able to be designed for a near endless number of specific targets, aptamers can also be made which change their conformation in a predictable and consistent way upon binding. This can lead to many unique and effective detection methods using a variety of optical and electrochemical means.

Recent trends in SELEX technique and its application to food safety monitoring

The method referred to as "systemic evolution of ligands by exponential enrichment" (SELEX) was introduced in 1990 and ever since has become an important tool for the identification and screening of aptamers. Such nucleic acids can recognize and bind to their corresponding targets (analytes) with high selectivity and affinity, and aptamers therefore have become attractive alternatives to traditional antibodies not the least because they are much more stable. Meanwhile, they have found numerous applications in different fields including food quality and safety monitoring. This review first gives an introduction into the selection process and to the evolution of SELEX, then covers applications of aptamers in the surveillance of food safety (with subsections on absorptiometric, electrochemical, fluorescent and other methods), and then gives conclusions and perspectives. The SELEX method excels by its features of in vitro, high throughput and ease of operation. This review contains 86 references.

A simple and sensitive approach for ochratoxin A detection using a label-free fluorescent aptasensor

Ochratoxin A(OTA) is found to be one of the predominant contaminating mycotoxins in a wide variety of food commodities. To avoid the risk of OTA consumption, the detection and quantitation of OTA level are of great significance. Based on the fact that ssDNA aptamer has the ability to form a double-strand structure with its complementary sequence, a simple and rapid aptamer-based label-free approach for highly sensitive and selective fluorescence detection of OTA was developed by using ultra-sensitive double-strand DNA specific dyes PicoGreen. The results showed that as low as 1 ng/mL of OTA could be detected with a dynamic range of more than 5 orders of magnitude which satisfies the requirements for OTA maximum residue limit in various food regulated by European Commission. With the specificity of aptamer, the assay exhibited high selectivity for OTA against two other analogues (N-acetyl-l-phenylalanine and zearalenone). We also tested the aptasensor practicability using real sample of 1% beer spiked with a series of concentration of OTA and the results show good tolerance to matrix effect. All detections could be achieved in less than 30 min, which provides a simple, quick and sensitive detection method for OTA screening in food safety and could be easily extend to other small molecular chemical compounds detection which aptamer has been selected.

Interaction of single-stranded DNA with graphene oxide: fluorescence study and its application for S1 nuclease detection

The mechanism for short ssDNA having weaker affinity to graphene oxide than long ssDNA was systematically investigated.

Ultrasensitive electrochemical aptasensor for ochratoxin A based on two-level cascaded signal amplification strategy

Ochratoxin A (OTA) has a number of toxic effects to both humans and animals, so developing sensitive detection method is of great importance. Herein, we describe an ultrasensitive electrochemical aptasensor for OTA based on the two-level cascaded signal amplification strategy with methylene blue (MB) as a redox indicator. In this method, capture DNA, aptamers, and reporter DNA functionalized-gold nanoparticles (GNPs) were immobilized on the electrode accordingly, where GNPs were used as the first-level signal enhancer. To receive the more sensitive response, a larger number of guanine (G)-rich DNA was bound to the GNPs' surface to provide abundant anchoring sites for MB to achieve the second-level signal amplification. By employing this novel strategy, an ~8.5 (±0.3) fold amplification in signal intensity was obtained. Afterward, OTA was added to force partial GNPs/G-rich DNA to release from the sensing interface and thus decreased the electrochemical response. An effective sensing range from 2.5pM to 2.5nM was received with an extremely low detection limit of 0.75 (±0.12) pM. This amplification strategy has the potential to be the main technology for aptamer-based electrochemical biosensor in a variety of fields.

Aptamer-based analysis: a promising alternative for food safety control

Ensuring food safety is nowadays a top priority of authorities and professional players in the food supply chain. One of the key challenges to determine the safety of food and guarantee a high level of consumer protection is the availability of fast, sensitive and reliable analytical methods to identify specific hazards associated to food before they become a health problem. The limitations of existing methods have encouraged the development of new technologies, among them biosensors. Success in biosensor design depends largely on the development of novel receptors with enhanced affinity to the target, while being stable and economical. Aptamers fulfill these characteristics, and thus have surfaced as promising alternatives to natural receptors. This Review describes analytical strategies developed so far using aptamers for the control of pathogens, allergens, adulterants, toxins and other forbidden contaminants to ensure food safety. The main progresses to date are presented, highlighting potential prospects for the future.

Amplified impedimetric aptasensor based on gold nanoparticles covalently bound graphene sheet for the picomolar detection of ochratoxin A

An amplified electrochemical impedimetric aptasensor for ochratoxin A (OTA) was developed with picomolar sensitivity. A facile route to fabricate gold nanoparticles covalently bound reduced graphene oxide (AuNPs-rGO) resulted in a large number of well-dispersed AuNPs on graphene sheets with tremendous binding sites for DNA, since the single rGO sheet and each AuNP can be loaded with hundreds of DNA strands. An aptasensor with sandwich model was fabricated which involved thiolated capture DNA immobilized on a gold electrode to capture the aptamer, then the sensing interface was incubated with OTA at a desired concentration, followed by AuNPs-rGO functionalized reporter DNA hybridized with the residual aptamers. By exploiting the AuNPs-rGO as an excellent signal amplified platform, a single hybridization event between aptamer and reporter DNA was translated into more than 10(7) redox events, leading to a substantial increase in charge-transfer resistance (Rct) by 7~ orders of magnitude compared with that of the free aptamer modified electrode. Such designed aptasensor showed a decreased response of Rct to the increase of OTA concentrations over a wide range of 1 pg mL(-1)-50 ng mL(-1) and could detect extremely low OTA concentration, namely, 0.3 pg mL(-1) or 0.74 pM, which was much lower than that of most other existed impedimetric aptasensors. The signal amplification platform presented here would provide a promising model for the aptamer-based detection with a direct impedimetric method.

Development of 1,1'-oxalyldiimidazole chemiluminescent biosensor using the combination of graphene oxide and hairpin aptamer and its application

Highly sensitive biosensor with 1,1'-oxalyldiimidazole chemiluminescence (ODI-CL) detection was developed to rapidly quantify Vibrio (V) parahaemolyticus without time-consuming procedures such as multiple long-incubations and washings. When V. parahaemolyticus in Tris-HCl (pH 7) and hairpin DNA aptamer conjugated with TEX615 in DNA free deionized water were consecutively added in PBS buffer (pH 7.4) containing graphene oxides (GOs), V. parahaemolyticus and GOs bind competitively to hairpin DNA aptamer conjugated with TEX615 during 10 min of incubation at room temperature. Brightness of light immediately emitted with the addition of ODI-CL reagents (e.g., ODI, H2O2) after the incubation was dependent on the concentration of V. parahaemolyticus in a sample. The dynamic range of linear calibration curve for the quantification of V. parahaemolyticus in a sample was from 4375 to 70,000 cells/ml. The limit of detection (LOD = background + 3 × standard deviation, 2230 cells/ml) of the biosensor operated with good accuracy, precision, and recovery was lower than those of conventional assay methods such as time-consuming and expensive enzyme-linked immunosorbent assays.

Rolling chain amplification based signal-enhanced electrochemical aptasensor for ultrasensitive detection of ochratoxin A

A novel electrochemical aptasensor is described for rapid and ultrasensitive detection of ochratoxin A (OTA) based on signal enhancement with rolling circle amplification (RCA). The primer for RCA was designed to compose of a two-part sequence, one part of the aptamer sequence directed against OTA while the other part was complementary to the capture probe on the electrode surface. In the presence of target OTA, the primer, originally hybridized with the RCA padlock, is replaced to combine with OTA. This induces the inhibition of RCA and decreases the OTA sensing signal obtained with the electrochemical aptasensor. Under the optimized conditions, ultrasensitive detection of OTA was achieved with a limit of detection (LOD) of 0.065 ppt (pg/mL), which is much lower than previously reported. The electrochemical aptasensor was also successfully applied to the determination of OTA in wine samples. This ultrasensitive electrochemical aptasensor is of great practical importance in food safety and could be widely extended to the detection of other toxins by replacing the sequence of the recognition aptamer.

Recent advances and achievements in nanomaterial-based, and structure switchable aptasensing platforms for ochratoxin A detection

Aptamer-based bioreceptors that can easily adopt their surroundings have captured the attention of scientists from a wide spectrum of domains in designing highly sensitive, selective and structure switchable sensing assays. Through elaborate design and chemical functionalization, numerous aptamer-based assays have been developed that can switch their conformation upon incubation with target analyte, resulting in an enhanced output signal. To further lower the detection limits to picomolar levels, nanomaterials have attracted great interest in the design of aptamer-based sensing platforms. Associated to their unique properties, nanomaterials offer great promise for numerous aptasensing applications. This review will discuss current research activities in the aptasensing with typical example of detection of ochratoxin A (OTA). OTA, a secondary fungal metabolite, contaminates a variety of food commodities, and has several toxicological effects such as nephrotoxic, hepatotoxic, neurotoxic, teratogenic and immunotoxic activities. The review will introduce advances made in the methods of integrating nanomaterials in aptasensing, and will discuss current conformational switchable design strategies in aptasensor fabrication methodologies.

Aptamers: a promosing tool for ochratoxin A detection in food analysis

The contamination of food and feed by mycotoxins has become an increasingly serious problem. Mycotoxins represent a major risk to human and animal health, as well as economics. Herein, we focus on Ochratoxin A (OTA), which is one of the most common mycotoxins contaminating feed and foodstuffs. OTA is a secondary metabolite produced by various Aspergillus and Penicillium strains. Upon ingestion, OTA has a number of acute and chronic toxic effects. It is nephrotoxic, teratogenic, immunosuppressive, and carcinogenic (group 2B). As a consequence, some regulatory limits have been introduced on the levels of OTA in several commodities. The toxic nature of OTA demands highly sensitive and selective monitoring techniques to protect human and animal health. As alternative to traditional analytical techniques, biochemical methods for OTA analysis have attained great interest in the last few decades. They are mainly based on the integration of antibodies or aptamers as biorecognition elements in sensing platforms. However, aptamers have gained more attention in affinity-based assays because of their high affinity, specificity, stability, and their easy chemical synthesis. In this brief review, we present an overview of aptamer-based assays and their applications in OTA purification and detection, appeared in the literature in the last five years.

Biomedical applications of graphene and graphene oxide

Graphene has unique mechanical, electronic, and optical properties, which researchers have used to develop novel electronic materials including transparent conductors and ultrafast transistors. Recently, the understanding of various chemical properties of graphene has facilitated its application in high-performance devices that generate and store energy. Graphene is now expanding its territory beyond electronic and chemical applications toward biomedical areas such as precise biosensing through graphene-quenched fluorescence, graphene-enhanced cell differentiation and growth, and graphene-assisted laser desorption/ionization for mass spectrometry. In this Account, we review recent efforts to apply graphene and graphene oxides (GO) to biomedical research and a few different approaches to prepare graphene materials designed for biomedical applications. Because of its excellent aqueous processability, amphiphilicity, surface functionalizability, surface enhanced Raman scattering (SERS), and fluorescence quenching ability, GO chemically exfoliated from oxidized graphite is considered a promising material for biological applications. In addition, the hydrophobicity and flexibility of large-area graphene synthesized by chemical vapor deposition (CVD) allow this material to play an important role in cell growth and differentiation. The lack of acceptable classification standards of graphene derivatives based on chemical and physical properties has hindered the biological application of graphene derivatives. The development of an efficient graphene-based biosensor requires stable biofunctionalization of graphene derivatives under physiological conditions with minimal loss of their unique properties. For the development graphene-based therapeutics, researchers will need to build on the standardization of graphene derivatives and study the biofunctionalization of graphene to clearly understand how cells respond to exposure to graphene derivatives. Although several challenging issues remain, initial promising results in these areas point toward significant potential for graphene derivatives in biomedical research.

Role of background observed in aptasensor with chemiluminescence detection

One-step chemiluminescent aptasensor was developed using chemically initiated electron exchange luminescence (CIEEL) between high-energy intermediate formed from 1,1'-oxalyldiimidazole chemiluminescence (ODI-CL) reaction and G-quadruplex (ochratoxin A (OTA)-bound aptamer conjugated with TEX615) generated. The sensitivity of chemiluminescent aptasensor, optimized with various variables (e.g., property of microfibers fabricated with 3,4,9,10-perylenetetracarboxylic dimide, determination of fluorescent dye labeled with aptamer, physical properties of buffer solution), was dependent on the background (concentration of high-energy intermediate) generated in ODI-CL reaction. The limit of detection (LOD=background+3×standard deviation, 0.5 nM) of ODI-CL aptasensor with lower background was lower than that (3.7 nM) with 20 times higher background. Also, the ratio of signal to background (S/B) of ODI-CL aptasensor with low background was about 5-fold higher than that with high background. The sensitivities of ODI-CL aptasensors, with low as well as high background, capable of accurately and precisely quantifying OTA within 10 min, were better than those of fluorescent aptasensors and as good as those of highly sensitive but time-consuming competitive enzyme-linked immune-sorbent assays (ELISAs) using expensive antibody produced with the sacrifice of small animals.

A chronocoulometric aptasensor based on gold nanoparticles as a signal amplification strategy for detection of thrombin

A sensitive chronocoulometric aptasensor for the detection of thrombin has been developed based on gold nanoparticle amplification. The functional gold nanoparticles, loaded with link DNA (LDNA) and report DNA (RDNA), were immobilized on an electrode by thrombin aptamers performing as a recognition element and capture probe. LDNA was complementary to the thrombin aptamers and RDNA was noncomplementary, but could combine with [Ru(NH₃)₆]³⁺ (RuHex) cations. Electrochemical signals obtained by RuHex that bound quantitatively to the negatively charged phosphate backbone of DNA via electrostatic interactions were measured by chronocoulometry. In the presence of thrombin, the combination of thrombin and thrombin aptamers and the release of the functional gold nanoparticles could induce a significant decrease in chronocoulometric signal. The incorporation of gold nanoparticles in the chronocoulometric aptasensor significantly enhanced the sensitivity. The performance of the aptasensor was further increased by the optimization of the surface density of aptamers. Under optimum conditions, the chronocoulometric aptasensor exhibited a wide linear response range of 0.1-18.5 nM with a detection limit of 30 pM. The results demonstrated that this nanoparticle-based amplification strategy offers a simple and effective approach to detect thrombin.

Fluorescent sensing ochratoxin A with single fluorophore-labeled aptamer

We explored a fluorescent strategy for sensing ochratoxin A (OTA) by using a single fluorophore-labeled aptamer for detection of OTA. This method relied on the change of the fluorescence intensity of the labeled dye induced by the specific binding of the fluorescent aptamer to OTA. Different fluorescein labeling sites of aptamers were screened, including the internal thymine bases, 3'-end, and 5'-end of the aptamer, and the effect of the labeling on the aptamer affinity was investigated. Some fluorophore-labeled aptamers showed a signal-on or signal-off response. With the fluorescent aptamer switch, simple, rapid, and selective sensing of OTA at nanomolar concentrations was achieved. OTA spiked in diluted red wine could be detected, showing the feasibility of the fluorescent aptamer for a complex matrix. This method shows potential for designing aptamer sensors for other targets.

Surface modification of iron oxide nanoparticles by biocompatible polymers for tissue imaging and targeting

Superparamagnetic iron oxide nanoparticles (SPIONs) are excellent MR contrast agents when coated with biocompatible polymers such as hydrophilic synthetic polymers, proteins, polysaccharides, and lipids, which improve their stability and biocompatibility and reduce their aggregation. Various biocompatible materials, coated or conjugated with targeting moieties such as galactose, mannose, folic acid, antibodies and RGD, have been applied to SPION surfaces to provide tissue specificity to hepatocytes, macrophages, and tumor regions in order to reduce non-specific uptake and improve biocompatibility. This review discusses the recent progress in the development of biocompatible and hydrophilic polymers for improving stability of SPIONs and describes the carbohydrates based biocompatible materials that are providing SPIONs with cell/tissue specificity as ligands.

Glutathione-functionalized graphene quantum dots as selective fluorescent probes for phosphate-containing metabolites

Bright blue fluorescent glutathione-functionalized graphene quantum dots (GQDs@GSH) were prepared by a one-step pyrolysis method with a fluorescence quantum yield as high as 33.6%. Futhermore, the obtained GQDs@GSH can be used as a probe to estimate the ATP level in cell lysates and human blood serum.

Signal-amplification detection of small molecules by use of Mg2+-dependent DNAzyme

Because small molecules can be beneficial or toxic in biology and the environment, specific and sensitive detection of small molecules is one of the most important objectives of the scientific community. In this study, new signal amplification assays for detection of small molecules based on Mg(2+)-dependent DNAzyme were developed. A cleavable DNA substrate containing a ribonucleotide, the ends of which were labeled with black hole quencher (BHQ) and 6-carboxyfluorescein (FAM), was used for fluorescence detection. When the small molecule of interest is added to the assay solution, the Mg(2+)-dependent DNAzyme is activated, facilitating hybridization between the Mg(2+)-dependent DNAzyme and the DNA substrate. Binding of the substrate to the DNAzyme structure results in hydrolytic cleavage of the substrate in the presence of Mg(2+) ions. The fluorescence signal was amplified by continuous cleavage of the enzyme substrate. Ochratoxin A (OTA) and adenosine triphosphate (ATP) were used as model analytes in these experiments. This method can detect OTA specifically with a detection limit as low as 140 pmol L(-1) and detect ATP specifically with a detection limit as low as 13 nmol L(-1). Moreover, this method is potentially extendable to detection of other small molecules which are able to dissociate the aptamer from the DNAzyme, leading to activation of the DNAzyme.

Design of PEG-aptamer two piece macromolecules as convenient and integrated sensing platform: application to the label free detection of small size molecules

A novel strategy for the fabrication of electrochemical label free aptasensor for small size molecules is purposed, and the strategy has been demonstrated by the development of an aptasensor for ochratoxin (A). A long spacer chain of polyethylene glycol (PEG) was immobilized on screen printed carbon electrode (SPCE) via electrochemical oxidation of its terminal amino-group. The amino-aptamer was covalently linked to carboxy end of immobilized PEG to form two piece macromolecules. The designed immobilized macromolecules resulted in the formation of long tunnels on SPCE surface, while aptamer acted as gate of the tunnels. The aptamer gates were closed due to change in conformation of aptamer upon target analyte binding, decreasing the electrochemical signal. The decrease in electrochemical signal was used for the detection of target molecule.

Bipyrene-functionalized graphene as a "turn-on" fluorescence sensor for manganese(II) ions in living cells

1,2-bis-(2-pyren-1-ylmethylamino-ethoxy) ethane (NPEY) was synthesized and brought to the surface of graphene nanosheets (GNs) via π-π stacking, which provided a simple and convenient route for processing "turn-on" fluorescent sensor by simply mixing the diluted aqueous solutions of both components. The synthesized NPEY modified graphene nanosheets (NPEY-GNs) not only allows good selectivity toward Mn(2+) with the detection limit of 4.6 × 10(-5) M, but also shows "turn-on" response for Mn(2+) both in vitro and in living cells. These sensing capabilities of NPEY-GNs in living cells make it a robust candidate for many biological fields, such as intracellular tracking, intracellular imaging, etc.

Bio-functionalized graphene-graphene oxide nanocomposite based electrochemical immunosensing

We report a novel in-situ electrochemical synthesis approach for the formation of functionalized graphene-graphene oxide (fG-GO) nanocomposite on screen-printed electrodes (SPE). Electrochemically controlled nanocomposite film formation was studied by transmission electron microscopy (TEM) and Raman spectroscopy. Further insight into the nanocomposite has been accomplished by the Fourier transformed infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA) and X-ray diffraction (XRD) spectroscopy. Configured as a highly responsive screen-printed immunosensor, the fG-GO nanocomposite on SPE exhibits electrical and chemical synergies of the nano-hybrid functional construct by combining good electronic properties of functionalized graphene (fG) and the facile chemical functionality of graphene oxide (GO) for compatible bio-interface development using specific anti-diuron antibody. The enhanced electrical properties of nanocomposite biofilm demonstrated a significant increase in electrochemical signal response in a competitive inhibition immunoassay format for diuron detection, promising its potential applicability for ultra-sensitive detection of range of target analytes.

Advances in aptamer screening and small molecule aptasensors

It has been 20 years since aptamer and SELEX (systematic evolution of ligands by exponential enrichment) were described independently by Andrew Ellington and Larry Gold. Based on the great advantages of aptamers, there have been numerous isolated aptamers for various targets that have actively been applied as therapeutic and analytical tools. Over 2,000 papers related to aptamers or SELEX have been published, attesting to their wide usefulness and the applicability of aptamers. SELEX methods have been modified or re-created over the years to enable aptamer isolation with higher affinity and selectivity in more labor- and time-efficient manners, including automation. Initially, most of the studies about aptamers have focused on the protein targets, which have physiological functions in the body, and their applications as therapeutic agents or receptors for diagnostics. However, aptamers for small molecules such as organic or inorganic compounds, drugs, antibiotics, or metabolites have not been studied sufficiently, despite the ever-increasing need for rapid and simple analytical methods for various chemical targets in the fields of medical diagnostics, environmental monitoring, food safety, and national defense against targets including chemical warfare. This review focuses on not only recent advances in aptamer screening methods but also its analytical application for small molecules.

Graphene oxide as a quencher for fluorescent assay of amino acids, peptides, and proteins

Understanding the interaction between graphene oxide (GO) and the biomolecules is fundamentally essential, especially for disease- and drug-related peptides and proteins. In this study, GO was found to strongly interact with amino acids (tryptophan and tyrosine), peptides (Alzheimer's disease related amyloid beta 1-40 and type 2 diabetes related human islet amyloid polypeptide), and proteins (drug-related bovine and human serum albumin) by fluorescence quenching, indicating GO was a universal quencher for tryptophan or tyrosine related peptides and proteins. The quenching mechanism between GO and tryptophan (Trp) or tyrosine (Tyr) was determined as mainly static quenching, combined with dynamic quenching (Förster resonance energy transfer). Different quenching efficiency between GO and Trp or Tyr at different pHs indicated the importance of electrostatic interaction during quenching. Hydrophobic interaction also participated in quenching, which was proved by the presence of nonionic amphiphilic copolymer Pluronic F127 (PF127) in GO dispersion. The strong hydrophobic interaction between GO and PF127 efficiently blocked the hydrophobic interaction between GO and Trp or Tyr, lowering the quenching efficiency.

Microfluidic channel with embedded SERS 2D platform for the aptamer detection of ochratoxin A

A selective aptameric sequence is adsorbed on a two-dimensional nanostructured metallic platform optimized for surface-enhanced Raman spectroscopy (SERS) measurements. Using nanofabrication methods, a metallic nanostructure was prepared by electron-beam lithography onto a glass coverslip surface and embedded within a microfluidic channel made of polydimethylsiloxane, allowing one to monitor in situ SERS fingerprint spectra from the adsorbed molecules on the metallic nanostructures. The gold structure was designed so that its localized surface plasmon resonance matches the excitation wavelength used for the Raman measurement. This optofluidic device is then used to detect the presence of a toxin, namely ochratoxin-A (OTA), in a confined environment, using very small amounts of chemicals, and short data acquisition times, by taking advantage of the optical properties of a SERS platform to magnify the Raman signals of the aptameric monolayer system and avoiding chemical labeling of the aptamer or the OTA target.

Femtogram ultrasensitive aptasensor for the detection of Ochratoxin A

A simple and ultrasensitive method was developed for the detection of Ochratoxin A, utilizing an aptamer as a molecular recognition probe and real-time quantitative PCR (RT-qPCR) amplification of its complementary DNA as signal generators. Under the optimized conditions, the cycle threshold (Ct) increased linearly with 10-fold serial dilutions of Ochratoxin A (OTA) from 5×10⁻⁶ to 5 ng mL⁻¹, with a limit of detection (LOD) of 1 fg mL⁻¹. The specificity of this aptasensor was considered to be excellent, as when tested against four other toxins it produced no obvious Ct value change. Furthermore, a satisfactory analyte concentration recovery was obtained from a series of concentrations of OTA spiked into red wine. Therefore, this highly sensitive approach shows a significant potential in a wide range of target analytes.