Nickel nanoparticle–chitosan-reduced graphene oxide-modified screen-printed electrodes for enzyme-free glucose sensing in portable microfluidic devices

A Simple Microfluidic Electrochemical HPLC Detector for Quantifying Fenton Reactivity from Welding Fumes

Development and characterization of a simple microfluidic electrochemical flow cell that can be coupled with HPLC to enable dual absorbance/electrochemical detection is described. Coupling absorbance and electrochemical detection increases the information that can be gathered from a single injection, but a second (typically expensive) detection system is required. Here, an inexpensive, customizable microfluidic electrochemical detector is coupled in series with a commercial HPLC/UV system. The microfluidic device is made from poly(dimethylsiloxane) and contains carbon paste electrodes. To demonstrate the utility of this dual-detection system, the reaction products of the radical scavenging agent salicylic acid and hydroxyl radical generated by Fenton chemistry were analyzed. The dual-detection system was used to quantify 2,5-dihydroxybenzoic acid, 2,3-dihydroxybenzoic acid, and catechol produced by the addition of H₂O₂ to filter samples of welding fumes. Measurement recovery was high, with percent recoveries between 97-102%, 92-103%, and 95-103% for 2,5-dihydroxybenzoic acid, 2,3-dihydroxybenzoic acid, and catechol, respectively, for control samples. The methods described in this work are simple, reliable, and can inexpensively couple electrochemical detection to HPLC-UV systems.

Glucose Molecularly Imprinted Electrochemical Sensor Based on Chitosan and Nickel Oxide Electrode

In this work, A molecularly imprinted polymers (MIPs) electrochemical sensor based on chitosan (CS) and nickel electrode was constructed, finally used in glucose measurement. The MIPs sensor was prepared through electrodepositing glucose–CS composited film on the electrochemical treated nickel then removing glucose from the film via water elution. The morphology and electrochemical properties of the sensor were characterized via scanning electron microscope (SEM) , cyclic voltammetry (CV), respectively. Amperometric responses of the CS (MIP)-NiO electrode toward glucose was well-proportional to the concentration of the range from 10 μM to 200 μM. The developed sensor obtained the specific recognition to glucose against coexisting interferences such as oxalic acid, uric acid and ascorbic acid.

Integrated graphene/nanoparticle hybrids for biological and electronic applications

The development of novel graphene/nanoparticle hybrid materials is currently the subject of tremendous research interest. The intrinsic exceptional assets of both graphene (including graphene oxide and reduced graphene oxide) and nanoparticles render their hybrid materials synergic properties that can be useful in various applications. In this feature review, we highlight recent developments in graphene/nanoparticle hybrids and their promising potential in electronic and biological applications. First, the latest advances in synthetic methods for the preparation of the graphene/nanoparticle hybrids are introduced, with the emphasis on approaches to (1) decorate nanoparticles onto two-dimensional graphene and (2) wrap nanoparticles with graphene sheets. The pros and cons of large-scale synthesis are also discussed. Then, the state-of-the-art of graphene/nanoparticle hybrids in electronic and biological applications is reviewed. For electronic applications, we focus on the advantages of using these hybrids in transparent conducting films, as well as energy harvesting and storage. Biological applications, electrochemical biosensing, bioimaging, and drug delivery using the hybrids are showcased. Finally, the future research prospects and challenges in this rapidly developing area are discussed.

Ni(OH)2@Cu dendrite structure for highly sensitive glucose determination

Facile preparation of a nickel hydroxide-coated copper dendrite structure and excellent performance in glucose detection with sensitivity of 2082 μA mM⁻¹cm⁻².

A droplet-based microfluidic electrochemical sensor using platinum-black microelectrode and its application in high sensitive glucose sensing

We describe a droplet-based microfluidic electrochemical sensor using platinum-black (Pt-black) microelectrode. Pt-black microelectrode was generated by electrodeposition of Pt nanoparticles on bare Pt microelectrode. Scanning electron microscope (SEM) image displays a flower-like microstructure of Pt nanoparticels. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) indicate that the Pt-black efficiently decreased the charge transfer resistance and improved the electrocatalytic activity towards oxidation of hydrogen peroxide (H2O2). Compared with bare Pt microelectrode, the current response on Pt-black microelectrode increased 10.2 folds. The effect of applied potential and electrodeposition time has been investigated in detail. The proposed sensor was validated by performing enzyme activity assay in flowing droplets. For demonstration, glucose oxidase (GOx) is chosen as the model enzyme, which catalyzes the oxidation of β-D-glucose to the product H2O2. The enzyme activity of GOx was evaluated by measuring the electrochemical current responding to various glucose concentrations. And the results indicate that this microfluidic sensor holds great potential in fabricating novel glucose sensors with linear response up to 43.5mM. The analytical applications of the droplet-based microfluidic sensor were tested by using human blood serum samples. Reproducibility, interferences, and long-term stability of the modified electrode were also investigated. The present approach shows the feasibility and great potentials in constructing highly sensitive and low-consumption sensors in the field of droplet microfluidics.

Chitosan-graphene oxide based aptasensor for the impedimetric detection of lysozyme

An impedimetric detection of lysozyme (LYS) was performed for the first time in this study at the surface of chitosan-graphene oxide (CHIT-GO) modified sensor based on the specific interaction process between DNA aptamer and its cognate protein, LYS. The amino linked DNA aptamer (APT) was covalently immobilized without using any chemical agents onto the surface of pencil graphite electrode (PGE). These PGEs are inexpensive and simple to use, and thus, they can be furtherly developed for a single-use application in a portable protein chip device. The electrochemical impedance spectroscopy (EIS) technique was used herein to analyze (i) the surface characterization of unmodified PGE and CHIT-GO modified PGE, and also (ii) the interaction between APT and LYS. The limit of detection (DL) was found as 0.38 μg/mL (equals to 28.53 nM). This impedimetric LYS aptasensor exhibited a higher selectivity toward thrombin and bovine serum albumin, even in the mixture samples.