Osteochondral tissue engineering: current strategies and challenges

Hair follicle stem cells differentiation into bone cells on collagen scaffold

The hair follicle is a dynamic structure which contains different niches for stem cells, therefore; it has been considered as valuable and rich sources of stem cells, due to easy access, multipotency and non-oncogenic properties. In the present study, the differentiation capacities of hair follicle stem cells into bone cells on the natural collagen scaffolds were investigated. The stem cells were extracted from the hair follicle bulge area of male Wistar rats' whisker and cultured until 3rd passage, then osteogenic differentiations were induced by culturing the cells in the specific osteogenic medium. After 3 weeks, the differentiation parameters, including morphological changes, levels of calcification and expression of the bone specific genes were detected. The hydrogel preparation and scaffold fabrication was carried out using the extracted collagen and was studied by scanning electron microscope. Comparison of the stem cells' growth and changes on the scaffold and non-scaffold conditions showed that, in the both situation, the cells revealed differentiation signs of osteocytes, including large and cubic morphology with a star-shaped nucleus. Staining by Alizarin-red and Von-Kossa methods showed the presence of red and black calcium mass on the scaffold. Expression of the osteopontin and alkaline phosphatase genes confirmed the differentiation. Considerable porosity in the surface of the scaffold was recorded by scanning electron microscopy, which made it convenient for cells' attachment and growth. The data showed that the bulge stem cells possess significant capacity for osteoblastic differentiation and collagen scaffolds were found to be an appropriate matrix for growth and differentiation of the cell.

Tanshinone IIA Delivery Silk Fibroin Scaffolds Significantly Enhance Articular Cartilage Defect Repairing via Promoting Cartilage Regeneration

Cartilage tissue engineering is a promising approach for repairing articular cartilage defects and requires proper scaffolds and necessary growth factors. Herein, tanshinone IIA (TAN) delivery silk fibroin scaffolds were prepared for efficient cartilage defect repair by bioactivities of TAN. By incubating with the TAN delivery silk fibroin scaffold, the transcription of the chondrocytic activity-related genes was enhanced in chondrocytes, and it also can inhibit cell apoptosis and reduce the oxidative stress by regulating the transcription of related genes, indicating that these scaffolds may promote cartilage regeneration. TAN10 delivery silk fibroin scaffolds, in which the concentration of TAN is 10 μg/mL, significantly promotes chondrocytes to generate the cartilage-specific extracellular matrix and tissue both in vitro and in vivo, compared with silk fibroin scaffolds. By treating rabbit articular cartilage defects with TAN10 delivery silk fibroin scaffolds, cartilage defects were filled with hyaline-cartilage-like tissue that integrated with the surrounding cartilage perfectly and displayed strong mechanical properties and higher extracellular matrix content. Hence, TAN facilitates cartilage regeneration, and TAN delivery silk fibroin scaffolds can be potentially applied in the clinics treating cartilage defects in the future.

Age-Related Regeneration of Osteochondral and Tibial Defects by a Fibrin-Based Construct in vivo

Tissue-biomaterial interactions in different microenvironments influence significantly the repair and regeneration outcomes when a scaffold or construct is implanted. In order to elucidate this issue, a fibrin gel filled macroporous fibrin scaffold (fibrin-based scaffold) was fabricated by loading fibrinogen via a negative pressure method, following with thrombin crosslinking. The macroporous fibrin scaffold exhibited a porous structure with porosity of (88.1 ± 1.3)%, and achieved a modulus of 19.8 ± 0.4 kPa at a wet state after fibrin gel filling, providing a suitable microenvironment for bone marrow-derived mesenchymal stem cells (BMSCs). The in vitro cellular culture revealed that the fibrin-based scaffold could support the adhesion, spreading, and proliferation of BMSCs in appropriate cell encapsulation concentrations. The fibrin-based scaffolds were then combined with BMSCs and lipofectamine/plasmid deoxyribonucleic acid (DNA) encoding mouse-transforming growth factor β1 (pDNA-TGF-β1) complexes to obtain the fibrin-based constructs, which were implanted into osteochondral and tibial defects at young adult rabbits (3 months old) and aged adult rabbits (12 months old) to evaluate their respective repair effects. Partial repair of osteochondral defects and perfect restoration of tibial defects were realized at 18 weeks post-surgery for the young adult rabbits, whereas only partial repair of subchondral bone and tibial bone defects were found at the same time for the aged adult rabbits, confirming the adaptability of the fibrin-based constructs to the different tissue microenvironments by tissue-biomaterial interplays.

Ontogeny informs regeneration: explant models to investigate the role of the extracellular matrix in cartilage tissue assembly and development

Osteoarthritis (OA) is typically managed in late stages by replacement of the articular cartilage surface with a prosthesis as an effective, though undesirable outcome. As an alternative, hydrogel implants or growth factor treatments are currently of great interest in the tissue engineering community, and scaffold materials are often designed to emulate the mechanical and chemical composition of mature extracellular matrix (ECM) tissue. However, scaffolds frequently fail to capture the structure and organization of cartilage. Additionally, many current scaffold designs do not mimic processes by which structurally sound cartilage is formed during musculoskeletal development. The objective of this review is to highlight methods that investigate cartilage ontogenesis with native and model systems in the context of regenerative medicine. Specific emphasis is placed on the use of cartilage explant cultures that provide a physiologically relevant microenvironment to study tissue assembly and development. Ex vivo cartilage has proven to be a cost-effective and accessible model system that allows researchers to control the culture conditions and stimuli and perform proteomics and imaging studies that are not easily possible using in vivo experiments, while preserving native cell-matrix interactions. We anticipate our review will promote a developmental biology approach using explanted tissues to guide cartilage tissue engineering and inform new treatment methods for OA and joint damage.

Chitosan/collagen based biomimetic osteochondral tissue constructs: A growth factor-free approach

Tissue engineering approach offers alternative strategies to develop multi-layered/multi-component osteochondral mimetic constructs to meet the requirements of the heterogeneous and layered structure of native osteochondral tissue. Herein, an iterative overlaying process to fabricate a multi-layered scaffold with a gradient composition and layer specific structure have been developed by combining the natural extracellular matrix (ECM) components-chitosan, type I collagen, type II collagen, nanohydroxyapatite- of the osteochondral tissue in biomimetic compositions. Subchondral bone layer was prepared by using freeze-drying method to obtain 3D porous scaffolds. The calcified cartilage and cartilage layers were prepared by thermal gelation method in the hydrogel form. Osteochondral scaffolds fabricated by iterative overlaying of each distinct layer exhibited a porous, continuous gradient structure and supported cell proliferation in a co-culture of MC3T3-E1 preosteoblasts and ATDC5 chondrocytes. Histology and biochemical analysis showed enhanced extracellular matrix production and demonstrated collagen and glycosaminoglycan deposition. Expression of genes specific for bone, calcified cartilage and cartilage were improved in the osteochondral scaffold. Overall, these findings suggest that iterative overlaying of freeze-dried scaffolds and hydrogel matrices prepared by using ECM components in biomimetic ratios to fabricate gradient, multi-layered structures can be a promising strategy without the need for growth factors.

Where is human-based cellular pharmaceutical R&D taking us in cartilage regeneration?

Lately, cellular-based cartilage joint therapies have gradually gained more attention, which leads to next generation bioengineering approaches in the development of cell-based medicinal products for human use in cartilage repair. The greatest hurdles of chondrocyte-based cartilage bioengineering are: (i) preferring the cell source; (ii) differentiation and expansion processes; (iii) the time necessary for chondrocyte expansion pre-implantation; and (iv) fixing the chondrocyte count in accordance with the lesion surface area of the patient in question. The chondrocyte presents itself to be the focal starting material for research and development of bioengineered cartilage-based medicinal products which promise the regeneration and restoration of non-orthopedic cartilage joint defects. Even though chondrocytes seem to be the first choice, inevitable complications related to proliferation, dedifferentation and redifferentiation are probable. Detailed studies are a necessity to fully investigate detailed culturing conditions, the chondrogenic strains of well-defined phenotypes and evaluation of the methods to be used in biomaterial production. Despite a majority of the current methods which aid amelioration of joint functionality, they are insufficient in fully restoring the natural structure and composition of the joint cartilage. Hence current studies have trended towards gene therapy, mesenchymal stem cells and tissue engineering practices. There are many studies addressing the outcomes of chondrocytes in the clinical scene, and many vital biomaterials have been developed for structuring the bioengineered cartilage. This study aims to convey to the audience the practical significance of chondrocyte-based clinical applications.

Coculturing of mesenchymal stem cells of different sources improved regenerative capability of osteochondral defect in the mature rabbit: An in vivo study

PURPOSE

Choosing a therapeutic cell source for osteochondral repair remains a challenge. The present study investigated coculturing mesenchymal stem cells (MSCs) from different sources to provide an improved therapeutic cell option for osteochondral repair.

METHODS

Dutch and Japanese white rabbits were used in this study, the first for isolating MSCs and the second for creating an osteochondral model in the medial femoral condyle. The 26 rabbit knees were divided randomly into four groups: control ( n = 6), bone marrow-derived MSCs (BMSCs) ( n = 7), synovial tissue MSCs (SMSCs) ( n = 7), and cocultured MSCs ( n = 6). Tissue repair was assessed using the Fortier scale, and colony-forming assay was performed.

RESULTS

At different cell densities, cocultured and SMSCs formed larger colonies than BMSCs, indicating their high proliferative potential. After 2 months, complete filling of the defect with smooth surface regularity was detected in the cocultured MSC group, although there was no significant difference among the therapeutic groups macroscopically. Also, tissue repair was histologically better in the cocultured MSC group than in the control and SMSC groups, due to repair of the subchondral bone and coverage with hyaline cartilage. Additionally, toluidine blue and collagen-II staining intensity in the repaired tissue was better in the cocultured MSC group than in the remaining groups.

CONCLUSION

Our results suggest that cocultured MSCs are a suitable option for the regeneration capability of osteochondral defects due to their enhanced osteochondrogenic potential.

BMSCs-assisted injectable Col I hydrogel-regenerated cartilage defect by reconstructing superficial and calcified cartilage

The self-healing capacity of cartilage was limited due to absence of vascular, nervous and lymphatic systems. Although many clinical treatments have been used in cartilage defect repair and shown a promising repair result in short term, however, regeneration of complete zonal structure with physiological function, reconstruction cartilage homeostasis and maintaining long-term repair was still an unbridgeable chasm. Cartilage has complex zonal structure and multiple physiological functions, especially, superficial and calcified cartilage played an important role in keeping homeostasis. To address this hurdle of regenerating superficial and calcified cartilage, injectable tissue-induced type I collagen (Col I) hydrogel-encapsulated BMSCs was chosen to repair cartilage damage. After 1 month implantation, the results demonstrated that Col I gel was able to induce BMSCs differentiation into chondrocytes, and formed hyaline-like cartilage and the superficial layer with lubrication function. After 3 months post-surgery, chondrocytes at the bottom of the cartilage layer would undergo hypertrophy and promote the regeneration of calcified cartilage. Six months later, a continuous anatomical tidemark and complete calcified interface were restored. The regeneration of neo-hyaline cartilage was similar with adjacent normal tissue on the thickness of the cartilage, matrix secretion, collagen type and arrangement. Complete multilayer zonal structure with physiological function remodeling indicated that BMSCs-assisted injectable Col I hydrogel could reconstruct cartilage homeostasis and maintain long-term therapeutic effect.

Biomimetic gradient scaffold of collagen–hydroxyapatite for osteochondral regeneration

Osteochondral defects remain a major clinical challenge mainly due to the combined damage to the articular cartilage and the underlying bone, and the interface between the two tissues having very different properties. Current treatment modalities have several limitations and drawbacks, with limited capacity of restoration; however, tissue engineering shows promise in improving the clinical outcomes of osteochondral defects. In this study, a novel gradient scaffold has been fabricated, implementing a gradient structure in the design to mimic the anatomical, biological and physicochemical properties of bone and cartilage as closely as possible. Compared with the commonly studied multi-layer scaffolds, the gradient scaffold has the potential to induce a smooth transition between cartilage and bone and avoid any instability at the interface, mimicking the natural structure of the osteochondral tissue. The scaffold comprises a collagen matrix with a gradient distribution of low-crystalline hydroxyapatite particles. Physicochemical analyses confirmed phase and chemical compositions of the gradient scaffold and the distribution of the mineral phase along the gradient scaffold. Mechanical tests confirmed the gradient of stiffness throughout the scaffold, according to its mineral content. The gradient scaffold exhibited good biological performances both in vitro and in vivo. Biological evaluation of the scaffold, in combination with human bone-marrow–derived mesenchymal stem cells, demonstrated that the gradient of composition and stiffness preferentially increased cell proliferation in different sub-regions of the scaffold, according to their high chondrogenic or osteogenic characteristics. The in vivo biocompatibility of the gradient scaffold was confirmed by its subcutaneous implantation in rats. The gradient scaffold was significantly colonised by host cells and minimal foreign body reaction was observed. The scaffold’s favourable chemical, physical and biological properties demonstrated that it has good potential as an engineered osteochondral analogue for the regeneration of damaged tissue.

Animal Models of Osteochondral Defect for Testing Biomaterials

The treatment of osteochondral defects (OCD) remains a great challenge in orthopaedics. Tissue engineering holds a good promise for regeneration of OCD. In the light of tissue engineering, it is critical to establish an appropriate animal model to evaluate the degradability, biocompatibility, and interaction of implanted biomaterials with host bone/cartilage tissues for OCD repair in vivo. Currently, model animals that are commonly deployed to create osteochondral lesions range from rats, rabbits, dogs, pigs, goats, and sheep horses to nonhuman primates. It is essential to understand the advantages and disadvantages of each animal model in terms of the accuracy and effectiveness of the experiment. Therefore, this review aims to introduce the common animal models of OCD for testing biomaterials and to discuss their applications in translational research. In addition, we have reviewed surgical protocols for establishing OCD models and biomaterials that promote osteochondral regeneration. For small animals, the non-load-bearing region such as the groove of femoral condyle is commonly chosen for testing degradation, biocompatibility, and interaction of implanted biomaterials with host tissues. For large animals, closer to clinical application, the load-bearing region (medial femoral condyle) is chosen for testing the durability and healing outcome of biomaterials. This review provides an important reference for selecting a suitable animal model for the development of new strategies for osteochondral regeneration.

Osteochondral and bone tissue engineering scaffold prepared from Gallus var domesticus derived demineralized bone powder combined with gellan gum for medical application

Osteochondral (OC) lesions can occur in the knee and ankle. Such lesions induce a fracture in the cartilage protecting the bone joints. Cartilage tissue shows limited self-regeneration ability, hence the tissue is avascular and lack of vascular innervation, while the bone is a unique organ with the capacity to self-repair of small defects. In this present study, we have prepared a scaffold using demineralized bone powder (DBP) extracted from Gallus gallus var domesticus (GD), and Gellan gum (GG) for OC tissue regeneration. They were characterized for their chemical, physical, mechanical and biological properties using different available techniques, in vitro bioactivity was performed in simulated body fluid for 14 days confirming the formation of bone-like apatite. The in vitro biocompatibility was analyzed using chondrocyte cells and osteogenic and chondrogenic marker gene expression using RT-PCR, in vivo experiments performed by implanting scaffold in rabbit and characterized by histology and immunofluorescent stainings. The obtained results indicated that the prepared pores scaffold was biocompatible, and promote OC regeneration and integration of newly formed tissues with the host tissues in a rabbit. The prepared 1% DBP/GG scaffold can be used as a potential and promising alternate material for OC regeneration.

Role of the Calcified Cartilage Layer of an Integrated Trilayered Silk Fibroin Scaffold Used to Regenerate Osteochondral Defects in Rabbit Knees

The repair of osteochondral defects remains challenging, given the complexity of native osteochondral tissue and the limited self-repair capacity of cartilage. Osteochondral tissue engineering is a promising strategy. Here, we fabricated a biomimetic osteochondral scaffold using silk fibroin and hydroxyapatite, including a calcified cartilage layer (CCL). We studied the role played by the CCL in terms of cell viability in vivo. We established osteochondral defects in rabbit knees to investigate the effects of CCL-containing scaffolds with or without adipose tissue-derived stem cells (ADSCs). We evaluated osteochondral tissue regeneration by calculating gross observational scores, via histological and immunohistochemical assessments, by performing quantitative biochemical and biomechanical analyses of new osteochondral tissue, and via microcomputed tomography of new bone at 4, 8, and 12 weeks after surgery. In terms of surface roughness and integrity, the CCL + ADSCs group was better than the CCL and the non-CCL + ADSCs groups at all time points tested; the glycosaminoglycan and collagen type II levels of the CCL + ADSCs group were highest, reflecting the important role played by the CCL in cartilage tissue repair. Subchondral bone smoothness was better in the CCL + ADSCs group than in the non-CCL + ADSCs and CCL groups. The CCL promoted smooth subchondral bone regeneration but did not obviously affect bone strength or quality. In conclusion, a biomimetic osteochondral scaffold with a CCL, combined with autologous ADSCs, satisfactorily regenerated a rabbit osteochondral defect. The CCL enhances cartilage and subchondral bone regeneration.

Precision Medicine in Tissue Engineering on Bone

With the rapidly development of clinical treatments, precision medicine has come to people eyes with the requirement according to different people and different disease situation. So precision medicine is called personalized medicine which is a new frontier of healthcare. Bone tissue engineering developed from traditional bone graft to precise medicine era. So scientists seek approaches to harness stem cells, scaffolds, growth factors, and extracellular matrix to promise enhanced and more reliable bone formation. This review provides an overview of novel developments on precision medicine in tissue engineering of bone hoping it can open new perspectives of strategies on bone treatment.

Full-Scale Osteochondral Regeneration by Sole Graft of Tissue-Engineered Hyaline Cartilage without Co-Engraftment of Subchondral Bone Substitute

In this study, full-scale osteochondral defects are hypothesized, which penetrate the articular cartilage layer and invade into subchondral bones, and can be fixed by sole graft of tissue-engineered hyaline cartilage without co-engraftment of any subchondral bone substitute. It is hypothesized that given a finely regenerated articular cartilage shielding on top, the restoration of subchondral bones can be fulfilled via spontaneous self-remodeling in situ. Hence, the key challenge of osteochondral regeneration lies in restoration of the non-self-regenerative articular cartilage. Here, traumatic osteochondral lesions to be repaired in rabbit knee models are endeavored using novel tissue-engineered hyaline-like cartilage grafts that are produced by 3D cultured porcine chondrocytes in vitro. Comparative trials are conducted in animal models that are implanted with living hyaline cartilage grafts (LhCG) and decellularized LhCG (dLhCG). Sound osteochondral regeneration is gradually revealed from both LhCG and dLhCG-implanted samples 50-100 d after implantation. Quality regeneration in both zones of articular cartilage and subchondral bones are validated by the restored osteochondral composition, structure, phenotype, and mechanical property, which validate the hypothesis of this study.

Investigation of multiphasic 3D-bioplotted scaffolds for site-specific chondrogenic and osteogenic differentiation of human adipose-derived stem cells for osteochondral tissue engineering applications

Osteoarthritis is a degenerative joint disease that limits mobility of the affected joint due to the degradation of articular cartilage and subchondral bone. The limited regenerative capacity of cartilage presents significant challenges when attempting to repair or reverse the effects of cartilage degradation. Tissue engineered medical products are a promising alternative to treat osteochondral degeneration due to their potential to integrate into the patient's existing tissue. The goal of this study was to create a scaffold that would induce site-specific osteogenic and chondrogenic differentiation of human adipose-derived stem cells (hASC) to generate a full osteochondral implant. Scaffolds were fabricated using 3D-bioplotting of biodegradable polycraprolactone (PCL) with either β-tricalcium phosphate (TCP) or decellularized bovine cartilage extracellular matrix (dECM) to drive site-specific hASC osteogenesis and chondrogenesis, respectively. PCL-dECM scaffolds demonstrated elevated matrix deposition and organization in scaffolds seeded with hASC as well as a reduction in collagen I gene expression. 3D-bioplotted PCL scaffolds with 20% TCP demonstrated elevated calcium deposition, endogenous alkaline phosphatase activity, and osteopontin gene expression. Osteochondral scaffolds comprised of hASC-seeded 3D-bioplotted PCL-TCP, electrospun PCL, and 3D-bioplotted PCL-dECM phases were evaluated and demonstrated site-specific osteochondral tissue characteristics. This technique holds great promise as cartilage morbidity is minimized since autologous cartilage harvest is not required, tissue rejection is minimized via use of an abundant and accessible source of autologous stem cells, and biofabrication techniques allow for a precise, customizable methodology to rapidly produce the scaffold.

Therapeutic "Tool" in Reconstruction and Regeneration of Tissue Engineering for Osteochondral Repair

Repairing osteochondral defects to restore joint function is a major challenge in regenerative medicine. However, with recent advances in tissue engineering, the development of potential treatments is promising. In recent years, in addition to single-layer scaffolds, double-layer or multilayer scaffolds have been prepared to mimic the structure of articular cartilage and subchondral bone for osteochondral repair. Although there are a range of different cells such as umbilical cord stem cells, bone marrow mesenchyml stem cell, and others that can be used, the availability, ease of preparation, and the osteogenic and chondrogenic capacity of these cells are important factors that will influence its selection for tissue engineering. Furthermore, appropriate cell proliferation and differentiation of these cells is also key for the optimal repair of osteochondral defects. The development of bioreactors has enhanced methods to stimulate the proliferation and differentiation of cells. In this review, we summarize the recent advances in tissue engineering, including the development of layered scaffolds, cells, and bioreactors that have changed the approach towards the development of novel treatments for osteochondral repair.

Infiltration and In-Tissue Polymerization of Photocross-Linked Hydrogel for Effective Fixation of Implants into Cartilage-An In Vitro Study

Effective and biocompatible fixation of implants into cartilage defects has yet to be successfully achieved. [Poly-d,l-lactic acid/polyethyleneglycol/poly-d,l-lactic acid] (PDLLA-PEG) is a chondrosupportive scaffold that is photocross-linked using the visible-light photoinitiator lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP). Interestingly, LAP and its monomer DLLA-EG are able to infiltrate the cartilage and form hydrogels upon the detection of light. After the infiltration of LAP and DLLA-EG into the implant and host cartilage, an interconnected and continuous hydrogel structure is formed which fixes the implant within the host cartilage. A mechanical test shows that the infiltrated group displays a significantly higher push-out force than the group that has not been infiltrated (the traditional fibrin fixation group). Surprisingly, the in-cartilage hydrogel also reduces the release of sulfated glycosaminoglycan from cartilage explants. However, infiltration does not affect the cell viability or the expression of cartilage marker genes. This new strategy thus represents a biocompatible and efficient method to fix implants into host tissues.

Osteochondral tissue regenerated via a strategy by stacking pre-differentiated BMSC sheet on fibrous mesh in a gradient

The reconstruction of osteochondral tissue remains a challenging task in clinical therapy because of its heterogeneous structure. The best way to face the challenge is to develop a biomimetic construct to mimic the multilayered gradient from cartilage, to calcified cartilage and subchondral bone. In this study, bone marrow mesenchymal stromal cells (BMSCs) were cultured on electrospun fibrous meshes and cell sheets were incubated. The fibrous meshes were composed of 50% poly(L-lactide) and 50% gelatin, displaying excellent biocompatibility, cell affinity and degradability. Differentiation of BMSC sheets on fibrous meshes was induced chondrogenically or osteogenically. In particular, the BMSC sheets were able to be efficiently induced differentiating towards calcified cartilage by using a 1:1 (v/v) mixed medium of chondrogenic and osteogenic inductive media. Thus, a gradient 3D construct was built by stacking the differently pre-differentiated cell/mesh complexes layer by layer from top to bottom to mimic the cartilage-to-bone transition. With this gradient construct being implanted in the rabbit knee osteochondral defect, it was confirmed that it could promote the tissue regeneration with intact cartilage layer formation in comparison with the multilayered construct without a gradient. The strategy of using properly pre-differentiated BMSC sheet on fibrous mesh to build the osteochondral interface was thus suggested as being feasible and effective in mimicking its hierarchical complexity, and favored the repairing of injured joint cartilage.

Biodegradable zinc oxide composite scaffolds promote osteochondral differentiation of mesenchymal stem cells

Osteoarthritis (OA) involves the degeneration of articular cartilage and subchondral bone. The capacity of articular cartilage to repair and regenerate is limited. A biodegradable, fibrous scaffold containing zinc oxide (ZnO) was fabricated and evaluated for osteochondral tissue engineering applications. ZnO has shown promise for a variety of biomedical applications but has had limited use in tissue engineering. Composite scaffolds consisted of ZnO nanoparticles embedded in slow degrading, polycaprolactone to allow for dissolution of zinc ions over time. Zinc has well-known insulin-mimetic properties and can be beneficial for cartilage and bone regeneration. Fibrous ZnO composite scaffolds, having varying concentrations of 1-10 wt.% ZnO, were fabricated using the electrospinning technique and evaluated for human mesenchymal stem cell (MSC) differentiation along chondrocyte and osteoblast lineages. Slow release of the zinc was observed for all ZnO composite scaffolds. MSC chondrogenic differentiation was promoted on low percentage ZnO composite scaffolds as indicated by the highest collagen type II production and expression of cartilage-specific genes, while osteogenic differentiation was promoted on high percentage ZnO composite scaffolds as indicated by the highest alkaline phosphatase activity, collagen production, and expression of bone-specific genes. This study demonstrates the feasibility of ZnO-containing composites as a potential scaffold for osteochondral tissue engineering.

A Rabbit Model of Osteochondral Regeneration Using Three-Dimensional Printed Polycaprolactone-Hydroxyapatite Scaffolds Coated with Umbilical Cord Blood Mesenchymal Stem Cells and Chondrocytes

BACKGROUND This study aimed to investigate a rabbit model of osteochondral regeneration using three-dimensional (3-D) printed polycaprolactone-hydroxyapatite (PCL-HA) scaffolds coated with umbilical cord blood mesenchymal stem cells (UCB-MSCs) and chondrocytes. MATERIAL AND METHODS Nine female New Zealand white rabbits were included in the study. The 3-D PCL-HA scaffolds were prepared using fused deposition modeling 3-D printing technology. Seeding cells were prepared by co-culture of rabbit UCB-MSCs and chondrocytes with a ratio of 3: 1. A total of 4×10⁶ cells were seeded on 3-D PCL-HA scaffolds and implanted into rabbits with femoral trochlear defects. After 8 weeks of in vivo implantation, 12 specimens were sampled and examined using histology and scanning electron microscopy (SEM). The International Cartilage Repair Society (ICRS) macroscopic scores and histological results were recorded and compared with those of the unseeded PCL-HA scaffolds. RESULTS Mean ICRS scores for the UCB-MSCs and chondrocyte-seeded PCL-HA scaffolds (group A) were significantly higher than the normal unseeded control (NC) PCL-HA scaffold group (group B) (P<0.05). Histology with safranin-O and fast-green staining showed that the UCB chondrocyte-seeded PCL-HA scaffolds significantly promoted bone and cartilage regeneration. CONCLUSIONS In a rabbit model of osteochondral regeneration using 3-D printed PCL-HA scaffolds, the UCB chondrocyte-seeded PCL-HA scaffold promoted articular cartilage repair when compared with the control or non-seeded PCL-HA scaffolds.

Bilayered Scaffold Prepared from a Kartogenin-Loaded Hydrogel and BMP-2-Derived Peptide-Loaded Porous Nanofibrous Scaffold for Osteochondral Defect Repair

Recently, a bilayered scaffold with an anisotropic structure mimicking a native osteochondral tissue shows considerable potential for treating osteochondral defects. Herein, a bilayered scaffold consisting of biomimetic cartilage and a subchondral bone architecture was constructed for repairing osteochondral defect. A hydrogel prepared by the Schiff base reaction of gelatin, silk fibroin, and oxidized dextran was designed as the cartilage layer, while a nanofibrous scaffold with a macroporous structure prepared from the polymer blend of poly(l-lactic acid)/poly(lactic-co-glycolic acid)/poly(ε-caprolactone) using the dual phase separation technique served as a subchondral layer. The subchondral layer was then treated with polydopamine coating for osteogenic factor immobilization. To facilitate the chondrogenic and osteogenic differentiation of bone marrow mesenchymal stem cells on the bilayered scaffold, the cartilage-inducing drug kartogenin (KGN) and osteogenic-inducing factor bone morphogenetic protein 2-derived peptides (P24 peptides) were, respectively, loaded on the subchondral layer. Next, the in vitro release of KGN and P24 peptide from the corresponding layer was monitored, respectively, and the results showed that both the release time of KGN and P24 peptides would last for more than 28 days. The in vitro results indicated that the KGN-loaded cartilage layer and P24 peptides-loaded subchondral layer were capable of supporting cell proliferation, and induced the chondrogenic and osteogenic differentiation, respectively. Furthermore, the in vivo experiments suggested that the bilayered scaffold significantly accelerated the regeneration of the osteochondral tissue in the rabbit knee joint model. Consequently, this bilayered scaffold loaded with KGN and P24 peptides would be a promising candidate for repairing osteochondral defect.

Sonic hedgehog promotes chondrogenesis of rabbit bone marrow stem cells in a rotary cell culture system

BACKGROUND

Sonic hedgehog (Shh) is an important signalling protein involved in the induction of early cartilaginous differentiation. Herein, we demonstrate that Shh markedly induces chondrogenesis of rabbit bone marrow stromal cells (BMSCs) under microgravity conditions, and promotes cartilage regeneration.

RESULTS

In the rotary cell culture system (RCCS), chondrogenic differentiation was revealed by stronger Toluidine Blue and collagen II immunohistochemical staining in the Shh transfection group, and chondroinductive activity of Shh was equivalent to that of TGF-β. Western blotting and qRT-PCR analysis results verified the stronger expression of Sox9, aggrecan (ACAN), and collagen II in rabbit BMSCs treated with Shh or TGF-β in a microgravity environment. Low levels of chondrogenic hypertrophy, osteogenesis, and adipogenesis-related factors were detected in all groups. After transplantation in vivo, histological analysis revealed a significant improvement in cartilage and subchondral repair in the Shh transfection group.

CONCLUSIONS

These results suggested that Shh signalling promoted chondrogenesis in rabbit BMSCs under microgravity conditions equivalent to TGF-β, and improved the early stages of the repair of cartilage and subchondral defects. Furthermore, RCCS provided a dynamic culture microenvironment conducive for cell proliferation, aggregation and differentiation.

Toward zonally tailored scaffolds for osteochondral differentiation of synovial mesenchymal stem cells

Synovium-derived mesenchymal stem cells (SMSCs) are an emerging cell source for regenerative medicine applications, including osteochondral defect (OCD) repair. However, in contrast to bone marrow MSCs, scaffold compositions which promote SMSC chondrogenesis/osteogenesis are still being identified. In the present manuscript, we examine poly(ethylene) glycol (PEG)-based scaffolds containing zonally-specific biochemical cues to guide SMSC osteochondral differentiation. Specifically, SMSCs were encapsulated in PEG-based scaffolds incorporating glycosaminoglycans (hyaluronan or chondroitin-6-sulfate [CSC]), low-dose of chondrogenic and osteogenic growth factors (TGFβ1 and BMP2, respectively), or osteoinductive poly(dimethylsiloxane) (PDMS). Initial studies suggested that PEG-CSC-TGFβ1 scaffolds promoted enhanced SMSC chondrogenic differentiation, as assessed by significant increases in Sox9 and aggrecan. Conversely, PEG-PDMS-BMP2 scaffolds stimulated increased levels of osteoblastic markers with significant mineral deposition. A "Transition" zone formulation was then developed containing a graded mixture of the chondrogenic and osteogenic signals present in the PEG-CSC-TGFβ1 and PEG-PDMS-BMP2 constructs. SMSCs within the "Transition" formulation displayed a phenotypic profile similar to hypertrophic chondrocytes, with the highest expression of collagen X, intermediate levels of osteopontin, and mineralization levels equivalent to "bone" formulations. Overall, these results suggest that a graded transition from PEG-CSC-TGFβ1 to PEG-PDMS-BMP2 scaffolds elicits a gradual SMSC phenotypic shift from chondrocyte to hypertrophic chondrocyte to osteoblast-like. As such, further development of these scaffold formulations for use in SMSC-based OCD repair is warranted. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2019-2029, 2019.

Osteochondral tissue coculture: An in vitro and in silico approach

Osteochondral tissue engineering aims to regenerate functional tissue‐mimicking physiological properties of injured cartilage and its subchondral bone. Given the distinct structural and biochemical difference between bone and cartilage, bilayered scaffolds, and bioreactors are commonly employed. We present an osteochondral culture system which cocultured ATDC5 and MC3T3‐E1 cells on an additive manufactured bilayered scaffold in a dual‐chamber perfusion bioreactor. Also, finite element models (FEM) based on the microcomputed tomography image of the manufactured scaffold as well as on the computer‐aided design (CAD) were constructed; the microenvironment inside the two FEM was studied and compared. In vitro results showed that the coculture system supported osteochondral tissue growth in terms of cell viability, proliferation, distribution, and attachment. In silico results showed that the CAD and the actual manufactured scaffold had significant differences in the flow velocity, differentiation media mixing in the bioreactor and fluid‐induced shear stress experienced by the cells. This system was shown to have the desired microenvironment for osteochondral tissue engineering and it can potentially be used as an inexpensive tool for testing newly developed pharmaceutical products for osteochondral defects.

Sulfated polysaccharide-based scaffolds for orthopaedic tissue engineering

Given their native-like biological properties, high growth factor retention capacity and porous nature, sulfated-polysaccharide-based scaffolds hold great promise for a number of tissue engineering applications. Specifically, as they mimic important properties of tissues such as bone and cartilage they are ideal for orthopaedic tissue engineering. Their biomimicry properties encompass important cell-binding motifs, native-like mechanical properties, designated sites for bone mineralisation and strong growth factor binding and signaling capacity. Even so, scientists in the field have just recently begun to utilise them as building blocks for tissue engineering scaffolds. Most of these efforts have so far been directed towards in vitro studies, and for these reasons the clinical gap is still substantial. With this review paper, we have tried to highlight some of the important chemical, physical and biological features of sulfated-polysaccharides in relation to their chondrogenic and osteogenic inducing capacity. Additionally, their usage in various in vivo model systems is discussed. The clinical studies reviewed herein paint a promising picture heralding a brave new world for orthopaedic tissue engineering.

Cell Viability of Porous Poly(d,l-lactic acid)/Vertically Aligned Carbon Nanotubes/Nanohydroxyapatite Scaffolds for Osteochondral Tissue Engineering

Treatment of articular cartilage lesions remains an important challenge. Frequently the bone located below the cartilage is also damaged, resulting in defects known as osteochondral lesions. Tissue engineering has emerged as a potential approach to treat cartilage and osteochondral defects. The principal challenge of osteochondral tissue engineering is to create a scaffold with potential to regenerate both cartilage and the subchondral bone involved, considering the intrinsic properties of each tissue. Recent nanocomposites based on the incorporation of nanoscale fillers into polymer matrix have shown promising results for the treatment of osteochondral defects. In this present study, it was performed using the recently developed methodologies (electrodeposition and immersion in simulated body fluid) to obtain porous superhydrophilic poly(d,l-lactic acid)/vertically aligned carbon nanotubes/nanohydroxyapatite (PDLLA/VACNT-O:nHAp) nanocomposite scaffolds, to analyze cell behavior and gene expression of chondrocytes, and then assess the applicability of this nanobiomaterial for osteochondral regenerative medicine. The results demonstrate that PDLLA/VACNT-O:nHAp nanocomposite supports chondrocytes adhesion and decreases type I Collagen mRNA expression. Therefore, these findings suggest the possibility of novel nanobiomaterial as a scaffold for osteochondral tissue engineering applications.

Mesenchymal stem cell-loaded porous tantalum integrated with biomimetic 3D collagen-based scaffold to repair large osteochondral defects in goats

Background

The body is unable to repair and regenerate large area bone defects. Moreover, the repair capacity of articular cartilage is very limited. There has long been a lack of effective treatments for osteochondral lesions. The engineered tissue with biphase synthetic for osteochondral repair has become one of the hot research fields over the past few years. In this study, an integrated biomanufacturing platform was constructed with bone marrow mesenchymal stem cells (BMSCs)/porous tantalum (pTa) associated with chondrocytes/collagen membranes (CM) to repair large osteochondral defects in load-bearing areas of goats.

Methods

Twenty-four goats with a large osteochondral defect in the femoral heads of the left hind legs were randomly divided into three groups: eight were treated with chondrocytes/CM-BMSCs/pTa, eight were treated with pure CM-pTa composite, and the other eight goats were untreated. The repair effect was assessed by X-ray, gross observation, and histomorphology for 16 weeks after the operation. In addition, the biocompatibility of chondrocytes/CM-BMSCs/pTa was observed by flow cytometry, CCK8, immunocytochemistry, and Q-PCR. The characteristics of the chondrocytes/CM-BMSCs/pTa were evaluated using both scanning electron microscopy and mechanical testing machine.

Results

The integrated repair material consists of pTa, injectable fibrin sealant, and CM promoted adhesion and growth of BMSCs and chondrocytes. pTa played an important role in promoting the differentiation of BMSCs into osteoblasts. Three-dimensional CM maintained the phenotype of chondrocytes successfully and expressed chondrogenic genes highly. The in vivo study showed that after 16 weeks from implantation, osteochondral defects in almost half of the femoral heads had been successfully repaired by BMSC-loaded pTa associated with biomimetic 3D collagen-based scaffold.

Conclusions

The chondrocytes/CM-BMSCs/pTa demonstrated significant therapeutic efficacy in goat models of large osteochondral defect. This provides a novel therapeutic strategy for large osteochondral lesions in load-bearing areas caused by severe injury, necrosis, infection, degeneration, and tumor resection with a high profile of safety, effectiveness, and simplicity.

Characterization and Cytotoxicity Evaluation of a Marine Sponge Biosilica

Bone fractures characterize an important event in the medical healthcare, being related to traumas, aging, and diseases. In critical conditions, such as extensive bone loss and osteoporosis, the tissue restoration may be compromised and culminate in a non-union consolidation. In this context, the osteogenic properties of biomaterials with a natural origin have gained prominence. Particularly, marine sponges are promising organisms that can be exploited as biomaterials for bone grafts. Thus, the objectives of this study were to study the physicochemical and morphological properties of biosilica (BS) from sponges by using scanning electron microscopy, Fourier-transform infrared, X-ray diffraction (SEM, FTIR and XRD respectively), mineralization, and pH. In addition, tests on an osteoblast precursor cell line (MC3T3-E1) were performed to investigate its cytotoxicity and proliferation in presence of BS. Bioglass (BG) was used as gold standard material for comparison purposes. Sponge BS was obtained, and this fact was proven by SEM, FTIR, and XRD analysis. Calcium assay showed a progressive release of this ion from day 7 and a more balanced pH for BS was maintained compared to BG. Cytotoxicity assay indicated that BS had a positive influence on MC3T3-E1 cells viability and qRT-PCR showed that this material stimulated Runx2 and BMP4 gene expressions. Taken together, the results indicate a potential use of sponge biosilica for tissue engineering applications.

Biofabrication for osteochondral tissue regeneration: bioink printability requirements

Biofabrication allows the formation of 3D scaffolds through a precise spatial control. This is of foremost importance when aiming to mimic heterogeneous and anisotropic architecture, such as that of the osteochondral tissue. Osteochondral defects are a supreme challenge for tissue engineering due to the compositional and structural complexity of stratified architecture and contrasting biomechanical properties of the cartilage-bone interface. This review highlights the advancements and retreats witnessed by using developed bioinks for tissue regeneration, taking osteochondral tissue as a challenging example. Methods, materials and requirements for bioprinting were discussed, highlighting the pre and post-processing factors that researchers should consider towards the development of a clinical treatment.

Ex vivo MRI cell tracking of autologous mesenchymal stromal cells in an ovine osteochondral defect model

BACKGROUND

Osteochondral injuries represent a significant clinical problem requiring novel cell-based therapies to restore function of the damaged joint with the use of mesenchymal stromal cells (MSCs) leading research efforts. Pre-clinical studies are fundamental in translating such therapies; however, technologies to minimally invasively assess in vivo cell fate are currently limited. We investigate the potential of a MRI- (magnetic resonance imaging) and superparamagnetic iron oxide nanoparticle (SPION)-based technique to monitor cellular bio-distribution in an ovine osteochondral model of acute and chronic injuries.

METHODS

MSCs were isolated, expanded and labelled with Nanomag, a 250-nm SPION, and using a novel cell-penetrating technique, glycosaminoglycan-binding enhanced transduction (GET). MRI visibility thresholds, cellular toxicity and differentiation potential post-labelling were assessed in vitro. A single osteochondral defect was created in the medial femoral condyle in the left knee joint of each sheep with the contralateral joint serving as the control. Cells, either GET-Nanomag labelled or unlabelled, were delivered 1 week or 4.5 weeks later. Sheep were sacrificed 7 days post implantation and immediately MR imaged using a 0.2-T MRI scanner and validated on a 3-T MRI scanner prior to histological evaluation.

RESULTS

MRI data demonstrated a significant increase in MRI contrast as a result of GET-Nanomag labelling whilst cell viability, proliferation and differentiation capabilities were not affected. MRI results revealed evidence of implanted cells within the synovial joint of the injured leg of the chronic model only with no signs of cell localisation to the defect site in either model. This was validated histologically determining the location of implanted cells in the synovium. Evidence of engulfment of Nanomag-labelled cells by leukocytes is observed in the injured legs of the chronic model only. Finally, serum c-reactive protein (CRP) levels were measured by ELISA with no obvious increase in CRP levels observed as a result of P21-8R:Nanomag delivery.

CONCLUSION

This study has the potential to be a powerful translational tool with great implications in the clinical translation of stem cell-based therapies. Further, we have demonstrated the ability to obtain information linked to key biological events occurring post implantation, essential in designing therapies and selecting pre-clinical models.

A Col I and BCP ceramic bi-layer scaffold implant promotes regeneration in osteochondral defects

Osteochondral defects occur in the superficial cartilage region, intermediate calcified cartilage, and subchondral bone. Due to the limited regenerative capacity and complex zonal structure, it is critically difficult to develop strategies for osteochondral defect repair that could meet clinical requirements. In this study, type I collagen (Col I) and BCP ceramics were used to fabricate a new bi-layer scaffold for regeneration in osteochondral defects. The in vitro studies showed that the bi-layer scaffold provided special functions for cell migration, proliferation and secretion due to the layered scaffold structure. The in vivo results demonstrated that the bi-layered scaffold could effectively promote the regeneration of both the cartilage and the subchondral bone, and the newly formed cartilage layer, with a similar structure and thickness to the natural cartilaginous layer, could seamlessly integrate with the surrounding natural cartilage and regenerate an interface layer to mimic the native osteochondral structure.

A new bi-layer scaffold composed of Col I and BCP ceramic was prepared to regenerate osteochondral defect. The result demonstrated the bi-layer scaffold could effectively promote the regeneration of both the cartilage and the subchondral bone layer.

Tissue Engineering for the Temporomandibular Joint

Tissue engineering potentially offers new treatments for disorders of the temporomandibular joint which frequently afflict patients. Damage or disease in this area adversely affects masticatory function and speaking, reducing patients' quality of life. Effective treatment options for patients suffering from severe temporomandibular joint disorders are in high demand because surgical options are restricted to removal of damaged tissue or complete replacement of the joint with prosthetics. Tissue engineering approaches for the temporomandibular joint are a promising alternative to the limited clinical treatment options. However, tissue engineering is still a developing field and only in its formative years for the temporomandibular joint. This review outlines the anatomical and physiological characteristics of the temporomandibular joint, clinical management of temporomandibular joint disorder, and current perspectives in the tissue engineering approach for the temporomandibular joint disorder. The tissue engineering perspectives have been categorized according to the primary structures of the temporomandibular joint: the disc, the mandibular condyle, and the glenoid fossa. In each section, contemporary approaches in cellularization, growth factor selection, and scaffold fabrication strategies are reviewed in detail along with their achievements and challenges.

Sustained release of TGF-β1 via genetically-modified cells induces the chondrogenic differentiation of mesenchymal stem cells encapsulated in alginate sulfate hydrogels

Strategies based on growth factor (GF) delivery have attracted considerable attention in tissue engineering applications. Among different GFs, transforming growth factor beta 1 (TGF-β1) is considered to be a potent factor for inducing chondrogenesis. In the present study, an expression cassette encoding the TGF-β1 protein was prepared and transfected into the SP2/0-Ag14 cell line. The confocal microscopy of the transfected cells was performed to confirm the correct transfection process. The expression and in vitro release kinetics of the recombinant TGF-β1 were assessed by western blot analysis and ELISA, respectively. Moreover, the biological activity of the expressed protein was compared with that of a commercially available product. The chondrogenic effects of the sustained release of the recombinant TGF-β1 in an in vitro co-culture system were evaluated using a migration assay and real-time PCR. Results of confocal microscopy confirmed the successful transfection of the vector-encoding TGF-β1 protein into the SP2/0-Ag14 cells. The bioactivity of the produced protein was in the range of the commercial product. The sustained release of the TGF-β1 protein via SP2/0-Ag14 cells encapsulated in hydrogels encouraged the migration of adipose-derived MSCs. In addition, the expression analysis of chondrogenesis-related genes revealed that the pretreatment of encapsulated Ad-MSCs cells in alginate sulfate hydrogels through their exposure to the sustained release of TGF-β1 is an efficient approach before transplantation of cells into the body.

Biomimetic porous silk fibroin/biphasic calcium phosphate scaffold for bone tissue regeneration

The purpose of our study is to prepare a biomimetic porous silk fibroin (SF)/biphasic calcium phosphate (BCP) scaffold, and evaluate its performance in bone tissue regeneration. The differences in pore size, porosity, mechanical strength and biocompatibility of four different fibroin-containing scaffolds (0, 20, 40, and 60% SF) were studied in vitro. After inoculation with MC3T3-E1 cells, the ectopic bone formation ability of the SF/BCP bionic scaffold was evaluated in a rat model. The SEM and CT demonstrated that compared with pure BCP group (0% SF), the pore size and porosity of SF/BCP scaffolds were proportional to SF content, of which 40% of SF and 60% of SF groups were more suitable for cell growth. The compressive strength of SF/BCP scaffold was greater than that of the pure BCP scaffold, and showed a trend of first increasing and then decreasing with the increase of SF content, among which 40% of SF group had the maximum compressive strength (40.80 + 0.68) MPa. The SF/BCP scaffold had good biocompatibility, under the electron microscope, the cells can be smoothly attached to and propagated on the scaffold. After loading the osteoblasts, it showed excellent osteogenic capacity in the rat model. The SF/BCP scaffold can highly simulate the micro-environment of natural bone formation and can meet the requirements of tissue engineering. The SF/BCP biomimetic porous scaffold has excellent physical properties and biocompatibility. It can highly simulate the natural bone matrix composition and microenvironment, and can promote the adhesion and proliferation of osteoblasts. The SF/BCP scaffold has good ectopic osteogenesis after loading with osteoblasts, which can meet the requirements of scaffold materials in tissue engineering, and has broad application prospects in clinical application.

In vitro Chondrocyte Responses in Mg-doped Wollastonite/Hydrogel Composite Scaffolds for Osteochondral Interface Regeneration

The zone of calcified cartilage (ZCC) is the mineralized region between the hyaline cartilage and subchondral bone and is critical in cartilage repair. A new non-stoichiometric calcium silicate (10% Ca substituted by Mg; CSi-Mg10) has been demonstrated to be highly bioactive in an osteogenic environment in vivo. This study is aimed to systematically evaluate the potential to regenerate osteochondral interface with different amount of Ca-Mg silicate in hydrogel-based scaffolds, and to compare with the scaffolds containing conventional Ca-phosphate biomaterials. Hydrogel-based porous scaffolds combined with 0-6% CSi-Mg10, 6% β-tricalcium phosphate (β-TCP) or 6% nanohydroxyapatite (nHAp) were made with three-dimensional (3D) printing. An increase in CSi-Mg10 content is desirable for promoting the hypertrophy and mineralization of chondrocytes, as well as cell proliferation and matrix deposition. Osteogenic and chondrogenic induction were both up-regulated in a dose-dependent manner. In comparison with the scaffolds containing 6% β-TCP or nHAp, human deep zone chondrocytes (hDZCs) seeded on CSi-Mg10 scaffold of equivalent concentration exhibited higher mineralization. It is noteworthy that the hDZCs in the 6% CSi-Mg10 scaffolds maintained a higher expression of the calcified cartilage zone specific extracellular matrix marker and hypertrophic marker, collagen type X. Immunohistochemical and Alizarin Red staining reconfirmed these findings. The study demonstrated that hydrogel-based hybrid scaffolds containing 6% CSi-Mg10 are particularly desirable for inducing the formation of calcified cartilage.

Cartilaginous extracellular matrix derived from decellularized chondrocyte sheets for the reconstruction of osteochondral defects in rabbits

Cartilaginous extracellular matrix (ECM) materials derived from decellularized native articular cartilage are widely used in cartilage regeneration. However, it is difficult for endogenous cells to migrate into ECM derived from native cartilage owing to its nonporous structure and dense nature. Moreover, current decellularization approaches frequently lead to architectural breakdown and potential loss of surface composition of ECM. To solve this problem, we aimed to establish a novel biological ECM scaffold from chondrocyte sheets for cartilage regeneration. We cultured chondrocytes harvested from the auricular cartilage of 4-week-old New Zealand rabbits and enabled them to form cell sheets. These sheets were decellularized using sodium dodecyl sulfate (SDS) with three different concentrations, namely, 1%, 5%, and 10%, followed by 1% Triton X-100 and deoxyribonuclease enzyme solution. In vitro microstructural examination and mechanical tests demonstrated that 1% SDS not only removed chondrocytes completely but also maintained the native architecture and composition of ECM, thus avoiding the use of high-concentration SDS. Application of decellularized chondrocyte sheets for osteochondral defects in rabbits resulted in substantial host remodeling and variant regeneration of osteochondral tissues. One percent SDS-treated decellularized chondrocyte sheets contributed to the superior reconstruction of osteochondral defects as compared with 5% and 10% SDS groups, which includes vascularized subchondral bone, articular cartilage with adequate thickness, and integration with host tissues. Furthermore, ECM from 1% SDS significantly increased the migrating potential of bone marrow mesenchymal stem cells (BMSCs) in vitro. RT-PCR and western blot also revealed that ECM increased the expression of SOX-9 in BMSCs, whereas it decreased COL-X expression. In conclusion, our results suggested that the chondrocyte sheets decellularized with 1% SDS preserved the integrity and bioactivity, which favored cell recruitment and enabled osteochondral regeneration in the knee joints of rabbits, thus offering a promising approach for articular cartilage reconstruction without cell transplantation. STATEMENT OF SIGNIFICANCE: Although biological extracellular matrix (ECM) derived from decellularized native cartilage has been widely used in cartilage regeneration, it is difficult for endogenous cells to migrate into ECM owing to its dense nature. Moreover, current decellularization approaches lead to architectural breakdown of ECM. This study established a novel biological ECM from decellularized chondrocyte sheets for cartilage regeneration. Our results suggested that cartilaginous ECM favored cell recruitment and enabled osteochondral regeneration in rabbits, thus offering a promising approach for articular cartilage reconstruction without cell transplantation. SDS 1% adequately decellularized the chondrocytes in cell sheets, whereas it maintained the native architecture and composition of ECM, thereby avoiding the use of high-concentration SDS and providing a new way to acquire cartilaginous ECM.

Functionally graded multilayer scaffolds for in vivo osteochondral tissue engineering

Osteochondral tissue repair remains a significant challenge in orthopedic surgery. Tissue engineering of osteochondral tissue has transpired as a potential therapeutic solution as it can effectively regenerate bone, cartilage, and the bone-cartilage interface. While advancements in scaffold fabrication and stem cell engineering have made significant progress towards the engineering of composite tissues, such as osteochondral tissue, new approaches are required to improve the outcome of such strategies. Herein, we discuss the use of a single-unit trilayer scaffold with depth-varying pore architecture and mineral environment to engineer osteochondral tissues in vivo. The trilayer scaffold includes a biomineralized bottom layer mimicking the calcium phosphate (CaP)-rich bone microenvironment, a cryogel middle layer with anisotropic pore architecture, and a hydrogel top layer. The mineralized bottom layer was designed to support bone formation, while the macroporous middle layer and hydrogel top layer were designed to support cartilage tissue formation. The bottom layer was kept acellular and the top two layers were loaded with cells prior to implantation. When implanted in vivo, these trilayer scaffolds resulted in the formation of osteochondral tissue with a lubricin-rich cartilage surface. The osteochondral tissue formation was a result of continuous differentiation of the transplanted cells to form cartilage tissue and recruitment of endogenous cells through the mineralized bottom layer to form bone tissue. Our results suggest that integrating exogenous cell-based cartilage tissue engineering along with scaffold-driven in situ bone tissue engineering could be a powerful approach to engineer analogs of osteochondral tissue. In addition to offering new therapeutic opportunities, such approaches and systems could also advance our fundamental understanding of osteochondral tissue regeneration and repair.

STATEMENT OF SIGNIFICANCE

In this work, we describe the use of a single-unit trilayer scaffold with depth-varying pore architecture and mineral environment to engineer osteochondral tissues in vivo. The trilayer scaffold was designed to support continued differentiation of the donor cells to form cartilage tissue while supporting bone formation through recruitment of endogenous cells. When implanted in vivo, these trilayer scaffolds partially loaded with cells resulted in the formation of osteochondral tissue with a lubricin-rich cartilage surface. Approaches such as the one presented here that integrates ex vivo tissue engineering along with endogenous cell-mediated tissue engineering can have a significant impact in tissue engineering composite tissues with diverse cell populations and functionality.

Injectable hydrogels: a new paradigm for osteochondral tissue engineering

Osteochondral tissue engineering has become a promising strategy for repairing focal chondral lesions and early osteoarthritis (OA), which account for progressive joint pain and disability in millions of people worldwide. Towards improving osteochondral tissue repair, injectable hydrogels have emerged as promising matrices due to their wider range of properties such as their high water content and porous framework, similarity to the natural extracellular matrix (ECM), ability to encapsulate cells within the matrix and ability to provide biological cues for cellular differentiation. Further, their properties such as those that facilitate minimally invasive deployment or delivery, and their ability to repair geometrically complex irregular defects have been critical for their success. In this review, we provide an overview of innovative approaches to engineer injectable hydrogels towards improved osteochondral tissue repair. Herein, we focus on understanding the biology of osteochondral tissue and osteoarthritis along with the need for injectable hydrogels in osteochondral tissue engineering. Furthermore, we discuss in detail different biomaterials (natural and synthetic) and various advanced fabrication methods being employed for the development of injectable hydrogels in osteochondral repair. In addition, in vitro and in vivo applications of developed injectable hydrogels for osteochondral tissue engineering are also reviewed. Finally, conclusions and future perspectives of using injectable hydrogels in osteochondral tissue engineering are provided.

Hierarchically structured seamless silk scaffolds for osteochondral interface tissue engineering

The osteochondral healthcare market is driven by the increasing demand for affordable and biomimetic scaffolds. To meet this demand, silk fibroin (SF) from Bombyx mori and Antheraea assamensis is used to fabricate a biphasic scaffold, with fiber-free and fiber-reinforced phases, stimulating cartilage and bone revival. The fabrication is a facile reproducible process using single polymer (SF), for both phases, designed in a continuous and integrated manner. Physicochemical and mechanical scaffold characterization, display interconnected pores with differential swelling and tunable degradation. The compressive modulus values, extend to 40 kPa and 25%, for tensile strain, at elongation. The scaffold support, for growth and proliferation of chondrocytes and osteoblasts, for respective cartilage and bone regeneration, is verified from in vitro assessment. Up-regulation of alkaline phosphatase (ALP) activity, extracellular matrix secretion and gene expression are significant; with acceptable in vitro immune response. Upon implantation in rabbit osteochondral defects for 8 weeks, the histological and micro-CT examinations show biphasic scaffolds significantly enhance regeneration of cartilage and subchondral bone tissues, as compared to monophasic scaffolds. The regenerated bone mineral density (BMD) ranges from 600-700 mg hydroxyapatite (HA) per cm³. The results, therefore, showcase the critically positive characteristics of in vitro ECM deposition, and in vivo regeneration of osteochondral tissue by this hierarchically structured biphasic scaffold.

Multilayered Scaffold with a Compact Interfacial Layer Enhances Osteochondral Defect Repair

Repairing osteochondral defect (OCD) using advanced biomaterials that structurally, biologically, and mechanically fulfill the criteria for stratified tissue regeneration remains a significant challenge for researchers. Here, a multilayered scaffold (MLS) with hierarchical organization and heterogeneous composition is developed to mimic the stratified structure and complex components of natural osteochondral tissues. Specifically, the intermediate compact interfacial layer within the MLS is designed to resemble the osteochondral interface to realize the closely integrated layered structure. Subsequently, macroscopic observations, histological evaluation, and biomechanical and biochemical assessments are performed to evaluate the ability of the MLS of repairing OCD in a goat model. By 48 weeks postimplantation, superior hyalinelike cartilage and sound subchondral bone are observed in the MLS group. Furthermore, the biomimetic MLS significantly enhances the biomechanical and biochemical properties of the neo-osteochondral tissue. Taken together, these results confirm the potential of this optimized MLS as an advanced strategy for OCD repair.

Effect of electric stimulation on human chondrocytes and mesenchymal stem cells under normoxia and hypoxia

During joint movement and mechanical loading, electric potentials occur within cartilage tissue guiding cell development and regeneration. Exposure of cartilage exogenous electric stimulation (ES) may imitate these endogenous electric fields and promote healing processes. Therefore, the present study investigated the influence of electric fields on human chondrocytes, mesenchymal stem cells and the co-culture of the two. Human chondrocytes isolated from articular cartilage obtained post-mortally and human mesenchymal stem cells derived from bone marrow (BM-MSCs) were seeded onto a collagen-based scaffold separately or as co-culture. Following incubation with the growth factors over 3 days, ES was performed using titanium electrodes applying an alternating electric field (700 mV, 1 kHz). Cells were exposed to an electric field over 7 days under either hypoxic or normoxic culture conditions. Following this, metabolic activity was investigated and synthesis rates of extracellular matrix proteins were analyzed. ES did not influence metabolic activity of chondrocytes or BM-MSCs. Gene expression analyses demonstrated that ES increased the expression of collagen type II mRNA and aggrecan mRNA in human chondrocytes under hypoxic culture conditions. Likewise, collagen type II synthesis was significantly increased following exposure to electric fields under hypoxia. BM-MSCs and the co-culture of chondrocytes and BM-MSCs revealed a similar though weaker response regarding the expression of cartilage matrix proteins. The electrode setup may be a valuable tool to investigate the influence of ES on human chondrocytes and BM-MSCs contributing to fundamental knowledge including future applications of ES in cartilage repair.