A review of high value-added molecules production by microalgae in light of the classification

Low temperature combined with high inoculum density improves alpha-linolenic acid production and biochemical characteristics of Chlamydomonas reinhardtii

Chlamydomonas reinhardtii grows fast and is rich in polyunsaturated fatty acids. To explore whether the alpha-linolenic acid (ALA) content can be further enhanced, the cultures were incubated under different culture temperatures, light intensities and inoculum densities. Results showed that temperature exhibited more great impact on ALA synthesis of C. reinhardtii than light intensity and inoculum size. The changes of light intensity and inoculum size displayed non-significant effects on ALA content. The optimal ALA proportion in cells was obtained under the condition of 10 °C, 50 μE/m²/s and 5% inoculum density, which reached ∼ 39%.The augmented initial inoculum density could markedly improve the biomass of C. reinhardtii under 10 °C. The maximum ALA productivity (16.42 mg/L/d) was gained under 10 °C coupled with 25% inoculum size, where higher intracellular sugar and protein yield were observed. These results suggest C. reinhardtii would be an alternative feedstock for the industrial production of ALA.

Microalgal Biorefinery Concepts’ Developments for Biofuel and Bioproducts: Current Perspective and Bottlenecks

Microalgae have received much interest as a biofuel feedstock. However, the economic feasibility of biofuel production from microalgae does not satisfy capital investors. Apart from the biofuels, it is necessary to produce high-value co-products from microalgae fraction to satisfy the economic aspects of microalgae biorefinery. In addition, microalgae-based wastewater treatment is considered as an alternative for the conventional wastewater treatment in terms of energy consumption, which is suitable for microalgae biorefinery approaches. The energy consumption of a microalgae wastewater treatment system (0.2 kW/h/m³) was reduced 10 times when compared to the conventional wastewater treatment system (to 2 kW/h/m³). Microalgae are rich in various biomolecules such as carbohydrates, proteins, lipids, pigments, vitamins, and antioxidants; all these valuable products can be utilized by nutritional, pharmaceutical, and cosmetic industries. There are several bottlenecks associated with microalgae biorefinery. Hence, it is essential to promote the sustainability of microalgal biorefinery with innovative ideas to produce biofuel with high-value products. This review attempted to bring out the trends and promising solutions to realize microalgal production of multiple products at an industrial scale. New perspectives and current challenges are discussed for the development of algal biorefinery concepts.

High-value biochemical products & applications of freshwater eukaryotic microalgae

A shift in public perception of the health and nutritional benefits of organic supplements and skin care products has led to a surge in high-value products being extracted from microalgae. Traditional forms of microalgae products were proteins, lipids and carbohydrates. However, in recent times the extraction of carotenoids (pigments), polyunsaturated acids (PUFAs), vitamins, phytosterols and polyphenols has increased significantly. Despite the diversity of products most research has failed to scale up production to industrial scale due to economic constraints and productivity capacities. It is clear that the main market drivers are the pharmaceutical and nutraceutical industries. This paper reviews the high-value products produced from freshwater eukaryotic microalgae. In addition, the paper also considers the biochemical properties of eukaryotic microalgae to provide a comparative analysis of different strains based on their high-value product content.

Fluorogenic "on-off" nanosensor based on dual-quenching effect for imaging intracellular metabolite of various microalgae

Sensing intracellular compounds such as ATP in living microalgal cells is of great importance in diverse fields. To achieve this, nanosensing platform composed of graphene oxide (GO) and ATP aptamer (APT) was applied to diverse microalgal cells (Chlamydomonas reinhardtii, Chlorella vulgaris, Anabaena flos-aquae, and Ochromonas danica). The nanosized GO was characterized with atomic force microscopy (AFM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS). The nanosensing platform (GO-APT) was prepared by attaching fluorophore-labeled APT to GO. GO-APT was applicable to only cell wall-deficient species (O. danica and mutant strains of C. reinhardtii) and the existence of flagella did not affect the uptake of the GO-APT by the cells. These results indicate that the cell wall is the primary barrier of GO-APT internalization for sensing application. To reduce the background fluorescence signal elicited by nonspecific displacement of the fluorophore-labeled probe, APT was modified as molecular beacon (MB) type (APTMB). Owing to the double quenching effect (by GO and quencher-labeled complementary sequence), the background signal significantly reduced. Cytotoxicity of GO-APTMB on the microalgal species was also tested. The application of GO-APTMB had no effect on the growth of microalgae. Given that diverse aptamer sequences had been screened, the sensing platform is not limited for detecting ATP only, but also can be applied to other metabolite imaging by simply changing the aptamer sequences. Our research will contribute to broadening the application of GO and aptamer beacon complex for intracellular metabolite imaging and detecting.

Inline monitoring of high cell density cultivation of Scenedesmus rubescens in a mesh ultra-thin layer photobioreactor by photon density wave spectroscopy

Objective

Due to multiple light scattering that occurs inside and between cells, quantitative optical spectroscopy in turbid biological suspensions is still a major challenge. This includes also optical inline determination of biomass in bioprocessing. Photon Density Wave (PDW) spectroscopy, a technique based on multiple light scattering, enables the independent and absolute determination of optical key parameters of concentrated cell suspensions, which allow to determine biomass during cultivation.

Results

A unique reactor type, called “mesh ultra-thin layer photobioreactor” was used to create a highly concentrated algal suspension. PDW spectroscopy measurements were carried out continuously in the reactor without any need of sampling or sample preparation, over 3 weeks, and with 10-min time resolution. Conventional dry matter content and coulter counter measurements have been employed as established offline reference analysis. The PBR allowed peak cell dry weight (CDW) of 33.4 g L⁻¹. It is shown that the reduced scattering coefficient determined by PDW spectroscopy is strongly correlated with the biomass concentration in suspension and is thus suitable for process understanding. The reactor in combination with the fiber-optical measurement approach will lead to a better process management.

Supplementary Information

The online version contains supplementary material available at 10.1186/s13104-022-05943-2.

Biomolecules from Microalgae and Cyanobacteria: Applications and Market Survey

Nowadays, microalgae and cyanobacteria have become a promising and sustainable source of useful products, thanks to their richness in bioactive metabolites of high value (antibiotics, toxins, pharmaceutically active compounds, plant growth regulators, and others). These photoautotroph microorganisms generate biomass using photosynthesis. This review, which distinguishes microalgae and Cyanobacteria, often called blue-green microalgae, aims to present their classification and taxonomic diversity as the ecological niches occupied by them. In addition, the usages of open ponds and photobioreactors to produce various microalgae and Cyanobacteria strains and the high-value bioactive compounds from these microorganisms are summarized. Finally, the numerous commercial applications of these phytoplanktons in different fields, such as food, dietary supplements, feed, cosmetic, and biofuel applications, are reviewed.

The nucleolus as a genomic safe harbor for strong gene expression in Nannochloropsis oceanica

Microalgae are used in food and feed, and they are considered a potential feedstock for sustainably produced chemicals and biofuel. However, production of microalgal-derived chemicals is not yet economically feasible. Genetic engineering could bridge the gap to industrial application and facilitate the production of novel products from microalgae. Here, we report the discovery of a novel gene expression system in the oleaginous microalga Nannochloropsis that exploits the highly efficient transcriptional activity of RNA polymerase I and an internal ribosome entry site for translation. We identified the nucleolus as a genomic safe harbor for Pol I transcription and used it to construct transformant strains with consistently strong transgene expression. The new expression system provides an outstanding tool for genetic and metabolic engineering of microalgae and thus will probably make substantial contributions to microalgal research.

Techno-economic assessment for the production of algal fuels and value-added products: opportunities for high-protein microalgae conversion

BACKGROUND

Microalgae possess numerous advantages for use as a feedstock in producing renewable fuels and products, with techno-economic analysis (TEA) frequently used to highlight the economic potential and technical challenges of utilizing this biomass in a biorefinery context. However, many historical TEA studies have focused on the conversion of biomass with elevated levels of carbohydrates and lipids and lower levels of protein, incurring substantial burdens on the ability to achieve high cultivation productivity rates relative to nutrient-replete, high-protein biomass. Given a strong dependence of algal biomass production costs on cultivation productivity, further TEA assessment is needed to understand the economic potential for utilizing potentially lower-cost but lower-quality, high-protein microalgae for biorefinery conversion.

RESULTS

In this work, we conduct rigorous TEA modeling to assess the economic viability of two conceptual technology pathways for processing proteinaceous algae into a suite of fuels and products. One approach, termed mild oxidative treatment and upgrading (MOTU), makes use of a series of thermo-catalytic operations to upgrade solubilized proteins and carbohydrates to hydrocarbon fuels, while another alternative focuses on the biological conversion of those substrates to oxygenated fuels in the form of mixed alcohols (MA). Both pathways rely on the production of polyurethanes from unsaturated fatty acids and valorization of unconverted solids for use as a material for synthesizing bioplastics. The assessment found similar, albeit slightly higher fuel yields and lower costs for the MA pathway, translating to a residual solids selling price of $899/ton for MA versus $1033/ton for MOTU as would be required to support a $2.50/gallon gasoline equivalent (GGE) fuel selling price. A variation of the MA pathway including subsequent upgrading of the mixed alcohols to hydrocarbon fuels (MAU) reflected a required solids selling price of $975/ton.

CONCLUSION

The slight advantages observed for the MA pathway are partially attributed to a boundary that stops at oxygenated fuels versus fungible drop-in hydrocarbon fuels through a more complex MOTU configuration, with more comparable results obtained for the MAU scenario. In either case, it was shown that an integrated algal biorefinery can be economical through optimal strategies to utilize and valorize all fractions of the biomass.

Identification and characterization of the novel bioactive compounds from microalgae and cyanobacteria for pharmaceutical and nutraceutical applications

Microalgae and cyanobacteria (blue-green algae) are used as food by humans. They have gained a lot of attention in recent years because of their potential applications in biotechnology. Microalgae and cyanobacteria are good sources of many valuable compounds, including important biologically active compounds with antiviral, antibacterial, antifungal, and anticancer activities. Under optimal growth condition and stress factors, algal biomass produce varieties of potential bioactive compounds. In the current review, bioactive compounds production and their remarkable applications such as pharmaceutical and nutraceutical applications along with processes involved in identification and characterization of the novel bioactive compounds are discussed. Comprehensive knowledge about the exploration, extraction, screening, and trading of bioactive products from microalgae and cyanobacteria and their pharmaceutical and other applications will open up new avenues for drug discovery and bioprospecting.

Long-chain acyl-CoA synthetases activate fatty acids for lipid synthesis, remodeling and energy production in Chlamydomonas

Long-chain acyl-CoA synthetases (LACSs) play many roles in mammals, yeasts and plants, but knowledge on their functions in microalgae remains fragmented. Here via genetic, biochemical and physiological analyses, we unraveled the function and roles of LACSs in the model microalga Chlamydomonas reinhardtii. In vitro assays on purified recombinant proteins revealed that CrLACS1, CrLACS2 and CrLACS3 all exhibited bona fide LACS activities toward a broad range of free fatty acids. The Chlamydomonas mutants compromised in CrLACS1, CrLACS2 or CrLACS3 did not show any obvious phenotypes in lipid content or growth under nitrogen (N)-replete condition. But under N-deprivation, CrLACS1 or CrLACS2 suppression resulted in c. 50% less oil, yet with a higher amount of chloroplast lipids. By contrast, CrLACS3 suppression impaired oil remobilization and cell growth severely during N-recovery, supporting its role in fatty acid β-oxidation to provide energy and carbon sources for regrowth. Transcriptomics analysis suggested that the observed lipid phenotypes are likely not due to transcriptional reprogramming but rather a shift in metabolic adjustment. Taken together, this study provided solid experimental evidence for essential roles of the three Chlamydomonas LACS enzymes in lipid synthesis, remodeling and catabolism, and highlighted the importance of lipid homeostasis in cell growth under nutrient fluctuations.

Recent advances in microalgae-based remediation of industrial and non-industrial wastewaters with simultaneous recovery of value-added products

The ability of microalgae to grow in a broad spectrum of wastewaters manifests great potentials for removing contaminants from effluents of industries and urban areas. Since the post-treatment microalgae biomass is also a significant source of high-value products, microalgae-based wastewater treatment is an economical and sustainable solution to wastewater management. Adding more value, the integration of microalgae with living/non-living materials looks more promising. Microalgae-based treatment technology has certain limitations like high operational costs, problematic harvesting, large land requirements, and hindrance in photosynthesis due to turbid wastewater. These challenges need to be essentially addressed to achieve enhanced wastewater remediation. This review has highlighted the potential applications of microalgae in contaminant removal from wastewaters, simultaneous resource recovery, efficient microalgae-based hybrid systems along with bottlenecks and prospects. This state-of-the-art article will edify the role of microalgae in wastewater remediation, biomass valorization for bio-based products, and present numerous possibilities in strengthening the circular bioeconomy.

Microalgal secondary metabolite productions as a component of biorefinery: A review

The interest in developing microalgae for industrial use has been increasing because of concerns about the depletion of petroleum resources and securing sustainable energy sources. Microalgae have high biomass productivity and short culture periods. However, despite these advantages, various barriers need to be overcome for industrial applications. Microalgal cultivation has a high unit price, thus rendering industrial application difficult. It is indispensably necessary to co-produce their primary and secondary metabolites to compensate for these shortcomings. In this regard, this article reviews the following aspects, (1) co-production of primary and secondary metabolites in microalgae, (2) induction methods for the promotion of the biosynthesis of secondary metabolites, and (3) perspectives on the co-production and co-extraction of primary and secondary metabolites. This paper presents various approaches for producing useful metabolites from microalgae and suggests strategies that can be utilized for the co-production of primary and secondary metabolites.

Microalgae-based carbohydrates: A green innovative source of bioenergy

Microalgae contribute significantly to the global carbon cycle through photosynthesis. Given their ability to efficiently convert solar energy and atmospheric carbon dioxide into chemical compounds, such as carbohydrates, and generate oxygen during the process, microalgae represent an excellent and feasible carbohydrate bioresource. Microalgae-based biofuels are technically viable and, delineate a green and innovative field of opportunity for bioenergy exploitation. Microalgal polysaccharides are one of the most versatile groups for biotechnological applications and its content can be increased by manipulating cultivation conditions. Microalgal carbohydrates can be used to produce a variety of biofuels, including bioethanol, biobutanol, biomethane, and biohydrogen. This review provides an overview of microalgal carbohydrates, focusing on their use as feedstock for biofuel production, highlighting the carbohydrate metabolism and approaches for their enhancement. Moreover, biofuels produced from microalgal carbohydrate are showed, in addition to a new bibliometric study of current literature on microalgal carbohydrates and their use.

Application of Microalgal Stress Responses in Industrial Microalgal Production Systems

Adaptive laboratory evolution (ALE) has been widely utilized as a tool for developing new biological and phenotypic functions to explore strain improvement for microalgal production. Specifically, ALE has been utilized to evolve strains to better adapt to defined conditions. It has become a new solution to improve the performance of strains in microalgae biotechnology. This review mainly summarizes the key results from recent microalgal ALE studies in industrial production. ALE designed for improving cell growth rate, product yield, environmental tolerance and wastewater treatment is discussed to exploit microalgae in various applications. Further development of ALE is proposed, to provide theoretical support for producing the high value-added products from microalgal production.

The Active Phytohormone in Microalgae: The Characteristics, Efficient Detection, and Their Adversity Resistance Applications

Phytohormones are a class of small organic molecules that are widely used in higher plants and microalgae as chemical messengers. Phytohormones play a regulatory role in the physiological metabolism of cells, including promoting cell division, increasing stress tolerance, and improving photosynthetic efficiency, and thereby increasing biomass, oil, chlorophyll, and protein content. However, traditional abiotic stress methods for inducing the accumulation of energy storage substances in microalgae, such as high light intensity, high salinity, and heavy metals, will affect the growth of microalgae and will ultimately limit the efficient accumulation of energy storage substances. Therefore, the addition of phytohormones not only helps to reduce production costs but also improves the efficiency of biofuel utilization. However, accurate and sensitive phytohormones determination and analytical methods are the basis for plant hormone research. In this study, the characteristics of phytohormones in microalgae and research progress for regulating the accumulation of energy storage substances in microalgae by exogenous phytohormones, combined with abiotic stress conditions at home and abroad, are summarized. The possible metabolic mechanism of phytohormones in microalgae is discussed, and possible future research directions are put forward, which provide a theoretical basis for the application of phytohormones in microalgae.

Experimental Design and Optimization of Recovering Bioactive Compounds from Chlorella vulgaris through Conventional Extraction

Microalgae contain an abundance of valuable bioactive compounds such as chlorophylls, carotenoids, and phenolics and, consequently, present great commercial interest. The aim of this work is the study and optimization of recovering the aforementioned components from the microalgae species Chlorella vulgaris through conventional extraction in a laboratory-scale apparatus using a "green" mixture of ethanol/water 90/10 v/v. The effect of three operational conditions-namely, temperature (30-60 °C), duration (6-24 h) and solvent-to-biomass ratio (20-90 mL_solv/g_biom), was examined regarding the extracts' yield (gravimetrically), antioxidant activity, phenolic, chlorophyll, and carotenoid contents (spectrophotometric assays), as well as concentration in key carotenoids, i.e., astaxanthin, lutein, and β-carotene (reversed-phase-high-performance liquid chromatography (RP-HPLC)). For this purpose, a face-centered central composite design (FC-CCD) was employed. Data analysis resulted in the optimal extraction conditions of 30 °C, for 24 h with 37 mL_solv/g_biom and validation of the predicted models led to 15.39% w/w yield, 52.58 mg_extr/mg_DPPH (IC50) antioxidant activity, total phenolic, chlorophyll, and carotenoid content of 18.23, 53.47 and 9.92 mg/g_extr, respectively, and the total sum of key carotenoids equal to 4.12 mg/g_extr. The experimental data and predicted results were considered comparable, and consequently, the corresponding regression models were sufficiently reliable for prediction.

Supercritical fluid extraction (SCFE) as green extraction technology for high-value metabolites of algae, its potential trends in food and human health

Application of high-value algal metabolites (HVAMs) in cosmetics, additives, pigments, foods and medicines are very important. These HVAMs can be obtained from the cultivation of micro- and macro-algae. These metabolites can benefit human and animal health in a physiological and nutritional manner. However, because of conventional extraction methods and their energy and the use of pollutant solvents, the availability of HVAMs from algae remains insufficient. Receiving their sustainability and environmental benefits have recently made green extraction technologies for HVAM extractions more desirable. But very little information is available about the technology of green extraction of algae from these HVAM. This review, therefore, highlights the supercritical fluid extraction (SCFE) as principal green extraction technologyand theirideal parameters for extracting HVAMs. In first, general information is provided concerning the HVAMs and their components of macro and micro origin. The review also includes a description of SCFE technology's properties, instrumentation operation, solvents used, and the merits and demerits. Moreover, there are several HVAMs associated with their numerous high-level biological activities which include high-level antioxidant, anti-inflammatory, anticancer and antimicrobial activity and have potential health-beneficial effects in humans since they are all HVAMs, such as foods and nutraceuticals. Finally, it provides future insights, obstacles, and suggestions for selecting the right technologies for extraction.

Exploring the Potential of Nannochloropsis sp. Extract for Cosmeceutical Applications

Recently, there has been emerging interest in various natural products with skin protective effects as they are recognized as safe and efficient. Microalgae have developed chemical defense systems to protect themselves against oxidative stress caused by UV radiation by producing various bioactive compounds including a number of secondary metabolites, which have potential for cosmeceutical applications. In addition, microalgae have various advantages as a sustainable source for bioactive compounds with diverse functions due to their rapid growth rate, high productivity, and use of non-arable land. In this study, we aimed to investigate the cosmeceutical potential of ethanol extract from Nannochloropsis sp. G1-5 (NG15) isolated from the southern West Sea of the Republic of Korea. It contained PUFAs (including EPA), carotenoids (astaxanthin, canthaxanthin, β-carotene, zeaxanthin, violaxanthin), and phenolic compounds, which are known to have various skin protective functions. We confirmed that the NG15 extract showed various skin protective functions with low cytotoxicity, specifically anti-melanogenic, antioxidant, skin-moisturizing, anti-inflammatory, anti-wrinkling, and UV protective function, by measuring tyrosinase inhibition activity; melanin content; DPPH radical scavenging activity; expression of HAS-2, MMP-1, and Col1A1 genes; and elastase inhibition activity as well as cell viability after UV exposure. Our results indicated that the NG15 extract has the potential to be used for the development of natural cosmetics with a broad range of skin protective functions.

Effects of cultivation conditions on Chlorella vulgaris and Desmodesmus sp. grown in sugarcane agro-industry residues

Large-scale microalgae cultivation is often associated with high costs, and nutrients account for a significant part. However, the use of cheaper nutrients, carbon, and water sources could reduce expenses. This study aims to produce Chlorella vulgaris and Desmodesmus sp. cultivated in sugarcane biorefinery residues bagasse and vinasse. A biofertilizer from bagasse biochar was produced and characterized, and a pre-treatment by filtration was performed on vinasse. The effects of varying growth conditions (antibiotic, vinasse, and biofertilizer concentrations; air flowrate; pH; light intensity; and photoperiod) were discussed based on the results of a Plackett-Burman design. The highest cell density was achieved by Desmodesmus sp. (46·10⁶ cells mL^-1 from an initial 6.5·10⁶ cells mL^-1) using vinasse (20%) and biofertilizer (1 g L^-1). Specific metabolite accumulation was also observed. Under stress conditions, 21.3% lipids and 51.0% carbohydrates were obtained for two different cultivations. Using 1 g L^-1 of biofertilizer, biomass composition had 74.8% proteins.

Draft genome analysis, poly-phasic study and lipid biosynthesis pathway of Scenedesmus sp. SVMIICT1

A comprehensive polyphasic evaluation of a microalgal isolate Scenedesmus sp. SVMIICT1 through morphological, biochemical, photosynthetic characterization, next-generation sequencing and lipid pathway analysis was reported. The strain was cultivated photo-autotrophically, where the maximum photosynthetic yield (F_V/F_M) of 0.75 was observed on the 4^th day with optimal PSII photochemical efficiency. Enhanced electron transport rate (ETR(I)) with inhibitor 3-(3,4-dichlorophenyl)-1,1-dimethylurea (DCMU) resulted in cyclic electron flow. A fair share of carbohydrate content (36 µg/mg) was ascribed to the presence of pyrenoid towards higher CO₂ sequestration pursuant to carbon concentrating mechanism (CCM). Denovo sequencing of the genome was assembled, annotated for the prediction of gene and protein. KEGG automatic annotation server (KAAS) analysis depicted the presence of genes accompanying the biosynthesis of the glycerophospholipid pathway. Fatty acid profile represented a higher fraction of palmitic acid (C16:0; 41.6%) followed by alpha-linolenic acid (C18:3; 44.5%).

Extraction and characterization of microalgae-derived phenolics for pharmaceutical applications: A systematic review

Microalgae are regarded as a rich trove of diverse secondary metabolites that exert remarkable biological activities. In particular, microalgae-derived bioactive phenolic compounds (MBPCs) are a boon to biopharmaceutical and nutraceutical industries due to their diverse bioactivities, including antimicrobial, anticancer, antiviral, and immunomodulatory activities. The state-of-the-art green technologies for extraction and purification of MBPCs, along with the modern progress in the identification and characterization of MBPCs, have accelerated the discovery of novel active pharmaceutical compounds. However, several factors regulate the production of these bioactive phenolic compounds in microalgae. Furthermore, some microalgae species produce toxic phenolic compounds that negatively impact the aquatic ecosystem, animal, and human life. Therefore, the focus of this review paper is to bring into light the current innovations in bioprospection, extraction, purification, and characterization of MBPCs. This review is also aimed at a better understanding of the physicochemical factors regulating the production of MBPCs at an industrial scale. Finally, the present review covers the recent advances in toxicological evaluation, diverse applications, and future prospects of MBPCs in biopharmaceutical industries.

Dermocosmetic applications of microalgal pigments

Among photosynthetic microorganisms, Cyanobacteria and Microalgae species have been highly studied thank to their high value-added compounds for several industrial applications. Thus, their production is increasing in the last decade to produce raw material for cosmetics. In fact, the daily routine includes the use of cosmetics and sunscreens to protect against the environmental changes, mainly the increment of ultraviolet (UV) radiation rate with a consequent skin damage and premature aging due to this overexposure. As it is well discussed, chemical UV filters are extensively incorporated into sunscreens formulas; however, they can induce allergenic reactions as well. For these reasons, some pigments derived from microalgae, such as astaxanthin, lutein, β-carotene as well as other biocompounds are now well described in the literature as well as biotechnologically manufactured as natural ingredients to be incorporated into skin care products with multifunctional benefits even for sunscreen purposes. Hence, this investigation summarizes the recent studies about the main pigments from photosynthetic microorganisms' biomasses as well as their uses in dermocosmetics with novel attributes, such as anti-aging agents, makeups, skin lightening and whitening, among others.

Annual assessment of the wastewater treatment capacity of the microalga Scenedesmus almeriensis and optimisation of operational conditions

The depth of the culture and the dilution rate have a striking effect on the biomass productivity and the nutrient recovery capacity of microalgal cultures. The combination of culture depth and dilution rate that allows to maximise the performance of the system depends on environmental conditions. In the current study, a response surface methodology was used to explore the relationship between the two most relevant operational conditions and the biomass productivity achieved in 8.3 m² pilot-scale raceways operated using urban wastewater. Four polynomial models were developed, one for each season of the year. The software predicted biomass productivities of 12.3, 25.6, 32.7, and 18.9 g·m^-2·day^-1 in winter, spring, summer, and autumn, respectively. The models were further validated at pilot-scale with R² values ranging within 0.81 and 0.91, depending on the season. Lower culture depths had the advantage of minimising nitrification and stripping but allow to process a lower volume of wastewater per surface area. Biomass productivity was higher at culture depths of 0.05 m, when compared to 0.12 and 0.20 m, while the optimal dilution rate was season-dependent. Results reported herein are useful for optimising the biomass productivity of raceway reactors located outdoors throughout the year.

Fatty Acid Profile of Microalgal Oils as a Criterion for Selection of the Best Feedstock for Biodiesel Production

Microalgae are considered to be potentially attractive feedstocks for biodiesel production, mainly due to their fast growth rate and high oil content accumulated in their cells. In this study, the suitability for biofuel production was tested for Chlorella vulgaris, Chlorella fusca, Oocystis submarina, and Monoraphidium strain. The effect of nutrient limitation on microalgae biomass growth, lipid accumulation, ash content, fatty acid profile, and selected physico-chemical parameters of algal biodiesel were analysed. The study was carried out in vertical tubular photobioreactors of 100 L capacity. The highest biomass content at 100% medium dose was found for Monoraphidium 525 ± 29 mg·L−1. A 50% reduction of nutrients in the culture medium decreased the biomass content by 23% for O. submarina, 19% for Monoraphidium, 13% for C. vulgaris and 9% for C. fusca strain. Nutrient limitation increased lipid production and reduced ash content in microalgal cells. The highest values were observed for Oocystis submarina, with a 90% increase in lipids and a 45% decrease in ash content in the biomass under stress conditions. The fatty acid profile of particular microalgae strains was dominated by palmitic, oleic, linoleic, and linoleic acids. Nutrient stress increased the amount of saturated and unsaturated fatty acids affecting the quality of biodiesel, but this was determined by the type of strain.

Advances in technological control of greenhouse gas emissions from wastewater in the context of circular economy

This review paper aims to identify the main sources of carbon dioxide (CO₂) emissions from wastewater treatment plants (WWTPs) and highlights the technologies developed for CO₂ capture in this milieu. CO₂ is emitted in all the operational units of conventional WWTPs and even after the disposal of treated effluents and sludges. CO₂ emissions from wastewater can be captured or mitigated by several technologies such as the production of biochar from sludge, the application of constructed wetlands (CWs), the treatment of wastewater in microbial electrochemical processes (microbial electrosynthesis, MES; microbial electrolytic carbon capture, MECC; in microbial carbon capture, MCC), and via microalgal cultivation. Sludge-to-biochar and CW systems showed a high cost-effectiveness in the capture of CO₂, while MES, MECC, MCC technologies, and microalgal cultivation offered efficient capture of CO₂ with associate production of value-added by-products. At the state-of-the-art, these technologies, utilized for carbon capture and utilization from wastewater, require more research for further configuration, development and cost-effectiveness. Moreover, the integration of these technologies has a potential internal rate of return (IRR) that could equate the operation or provide additional revenue to wastewater management. In the context of circular economy, these carbon capture technologies will pave the way for new sustainable concepts of WWTPs, as an essential element for the mitigation of climate change fostering the transition to a decarbonised economy.

Influence of Light Conditions on Microalgae Growth and Content of Lipids, Carotenoids, and Fatty Acid Composition

Microalgae are a valuable natural resource for a variety of value-added products. The growth of microalgae is determined by the impact of many factors, but, from the point of view of the implementation of autotrophic growth, light is of primary importance. This work presents an overview of the influence of light conditions on the growth of microalgae, the content of lipids, carotenoids, and the composition of fatty acids in their biomass, taking into account parameters such as the intensity, duration of lighting, and use of rays of different spectral composition. The optimal light intensity for the growth of microalgae lies in the following range: 26-400 µmol photons m-2 s-1. An increase in light intensity leads to an activation of lipid synthesis. For maximum lipid productivity, various microalgae species and strains need lighting of different intensities: from 60 to 700 µmol photons m-2 s-1. Strong light preferentially increases the triacylglyceride content. The intensity of lighting has a regulating effect on the synthesis of fatty acids, carotenoids, including β-carotene, lutein and astaxanthin. In intense lighting conditions, saturated fatty acids usually accumulate, as well as monounsaturated ones, and the number of polyunsaturated fatty acids decreases. Red as well as blue LED lighting improves the biomass productivity of microalgae of various taxonomic groups. Changing the duration of the photoperiod, the use of pulsed light can stimulate microalgae growth, the production of lipids, and carotenoids. The simultaneous use of light and other stresses contributes to a stronger effect on the productivity of algae.

A Review of Microalgal Biofilm Technologies: Definition, Applications, Settings and Analysis

Biofilm-based algal cultivation has many advantages over the conventional suspended growth methods and has received increased attention as a potential platform for algal production, wastewater treatment (nutrient removal), and a potential pathway to supply feedstock for microalgae-based biorefinery attempts. However, the attached cultivation by definition and application is a result of a complex interaction between the biotic and abiotic components involved. Therefore, the entire understanding of the biofilm nature is still a research challenge due to the need for real-time analysis of the system. In this review, the state of the art of biofilm definition, its life cycle, the proposed designs of bioreactors, screening of carrier materials, and non-destructive techniques for the study of biofilm formation and performance are summarized. Perspectives for future research needs are also discussed to provide a primary reference for the further development of microalgal biofilm systems.

Production of Omega-3 Fatty Acids from the Microalga Crypthecodinium cohnii by Utilizing Both Pentose and Hexose Sugars from Agricultural Residues

The core objective of this work was to take advantage of the unexploited wheat straw biomass, currently considered as a broadly available waste stream from the Greek agricultural sector, towards the integrated valorization of sugar streams for the microbial production of polyunsaturated omega-3 fatty acids (PUFAs). The OxiOrganosolv pretreatment process was applied using acetone and ethanol as organic solvents without any additional catalyst. The results proved that both cellulose-rich solid pulp and hemicellulosic oligosaccharides-rich aqueous liquid fraction after pretreatment can be efficiently hydrolyzed enzymatically, thus resulting in high yields of fermentable monosaccharides. The latter were supplied as carbon sources to the heterotrophic microalga Crypthecodinium cohnii for the production of PUFAs, more specifically docosahexaenoic acid (DHA). The solid fractions consisted mainly of hexose sugars and led to higher DHA productivity than their pentose-rich liquid counterparts, which can be attributed to the different carbon source and C/N ratio in the two streams. The best performance was obtained with the solid pulp pretreated with ethanol at 160 °C for 120 min and an O2 pressure of 16 bar. The total fatty acids content reached 70.3 wt% of dried cell biomass, of which 32.2% was DHA. The total DHA produced was 7.1 mg per g of untreated wheat straw biomass.

Comparative Response of Marine Microalgae to H2O2-Induced Oxidative Stress

There have been growing interests in the biorefining of bioactive compounds from marine microalgae, including pigments, omega-3 fatty acids or antioxidants for use in the nutraceutical and cosmetic sectors. This study focused on the comparative responses of five marine microalgal species from different lineages, including the dinoflagellate Amphidinium carterae, chlorophyte Brachiomonas submarina, diatom Stauroneis sp., haptophyte Diacronema sp. and rhodophyte Rhodella violacea, to exposure during their batch growth to hydrogen peroxide (H₂O₂). A. carterae returned an enhanced signal with the DPPH assay (8.8 µmol Trolox eq/g DW) when exposed to H₂O₂, which was associated with reduced pigment yields and increased proportions in saturated C16 and C18 fatty acids. B. submarina showed enhanced antioxidant response upon exposure to H₂O₂ with the DPPH assay (10 µmol Trolox eq/g DW), a threefold decrease in lutein (from 2.3 to 0.8 mg/g) but a twofold increase in chlorophyll b (up to 30.0 mg/g). Stauroneis sp. showed a downward response for the antioxidant assays, but its pigment yields did not vary significantly from the control. Diacronema sp. showed reduced antioxidant response and fucoxanthin content (from 4.0 to 0.2 mg/g) when exposed to 0.5 mM H₂O₂. R. violacea exposed to H₂O₂ returned enhanced antioxidant activity and proportions of EPA but was not significantly impacted in terms of pigment content. Results indicate that H₂O₂ can be used to induce stress and initiate metabolic changes in microalgae. The responses were however species-specific, which would require further dosage optimisation to modulate the yields of specific metabolites in individual species.

Immobilized Tetraselmis sp. for reducing nitrogenous and phosphorous compounds from aquaculture wastewater

Removal of nitrogenous and phosphorus compounds from aquaculture wastewater by green microalgae (Tetraselmis sp.) was investigated using a novel method of algal cell immobilization. Immobilized microalgae removed nitrogenous and phosphorous compounds efficiently from aquaculture wastewater. Results showed that Tetraselmis beads reduced significantly (p < 0.05) the total ammonia nitrogen, nitrite nitrogen and soluble reactive phosphorous concentration (0.08; 0.10 and 0.17 mg/L, respectively) from the initial concentration of 7.7, 3.1 and 2.0 mg/L respectively within 48 h compared to other treatments. Removal rate of total ammonia nitrogen, nitrite nitrogen and soluble reactive phosphorous were 99.2, 99.2 and 94.3% respectively, for the artificial wastewater within 24 h. For the shrimp pond wastewater, total ammonia nitrogen, nitrite nitrogen and soluble reactive phosphorous were reduced 98.9, 97.7 and 91.1% respectively within 48 h. It is concluded that Tetraselmis sp. beads is an effective means to reduce nitrogen and phosphorus levels in aquaculture wastewater.

Secretomics: a biochemical footprinting tool for developing microalgal cultivation strategies

Microalgae offer a promising source of biofuel and a wide array of high-value biomolecules. Large-scale cultivation of microalgae at low density poses a significant challenge in terms of water management. High-density microalgae cultivation, however, can be challenging due to biochemical changes associated with growth dynamics. Therefore, there is a need for a biomarker that can predict the optimum density for high biomass cultivation. A locally isolated microalga Cyanobacterium aponinum CCC734 was grown with optimized nitrogen and phosphorus in the ratio of 12:1 for sustained high biomass productivity. To understand density-associated bottlenecks secretome dynamics were monitored at biomass densities from 0.6 ± 0.1 to 7 ± 0.1 g/L (2 to 22 OD) in batch mode. Liquid chromatography coupled with mass spectrometry identified 880 exometabolites in the supernatant of C. aponinum CCC734. The PCA analysis showed similarity between exometabolite profiles at low (4 and 8 OD) and mid (12 and 16 OD), whereas distinctly separate at high biomass concentrations (20 and 22 OD). Ten exometabolites were selected based on their role in influencing growth and are specifically present at low, mid, and high biomass concentrations. Taking cues from secretome dynamics, 5.0 ± 0.5 g/L biomass concentration (16 OD) was optimal for C. aponinum CCC734 cultivation. Further validation was performed with a semi-turbidostat mode of cultivation for 29 days with a volumetric productivity of 1.0 ± 0.2 g/L/day. The secretomes-based footprinting tool is the first comprehensive growth study of exometabolite at the molecular level at variable biomass densities. This tool may be utilized in analyzing and directing microalgal cultivation strategies and reduction in overall operating costs.

Marine bioactives: from energy to nutrition

Microalgae have been evaluated as promising resource for biodiesel production, but algal biofuel production is not yet commercially viable, which reflects the high energy costs linked with cultivation, harvesting, and dewatering of algae. As crude oil processing declines, microalgae biorefineries are being considered for producing bioactives such as enzymes, proteins, omega-3 oils, pigments, recombinant products, and vitamins, to offset the costs of biofuel production. We believe that producing algal bioactives through advanced manufacturing pathways, encompassing a biorefinery approach, would be effective, profitable, and economical.

Enhancement of co-production of lutein and protein in Chlorella sorokiniana FZU60 using different bioprocess operation strategies

Co-production of multiple compounds is an efficient approach to enhance the economic feasibility of microalgae-based metabolites production. In this study, Chlorella sorokiniana FZU60 was cultivated under different bioprocess strategies to enhance the co-production of lutein and protein. Results showed that both lutein and protein content (7.72 and 538.06 mg/g, respectively) were highest at the onset of nitrogen deficiency under batch cultivation. Semi-batch III strategy, with 75% microalgal culture replacement by fresh medium, obtained similar content, productivity, and yield of lutein and protein as batch cultivation, demonstrating that it can be used for stable and continuous production. Fed-batch II strategy, feeding with 1/3 modified BG11 medium, achieved super-high lutein and protein yield (28.81 and 1592.77 mg/L, respectively), thus can be used for high-output production. Besides, two-stage strategy, combining light intensity shift and semi-batch cultivation, gained extremely high lutein and protein productivity (15.31 and 1080.41 mg/L/day, respectively), thereby is a good option for high-efficiency production. Moreover, the fed-batch II and two-stage strategy achieved high-quality lutein and protein, thus are promising for the co-production of lutein and protein in C. sorokiniana FZU60 for commercial application.

Valorization of microalgae biomass into bioproducts promoting circular bioeconomy: a holistic approach of bioremediation and biorefinery

The need for alternative source of fuel has demanded the cultivation of 3rd generation feedstock which includes microalgae, seaweed and cyanobacteria. These phototrophic organisms are unique in a sense that they utilise natural sources like sunlight, water and CO₂ for their growth and metabolism thereby producing diverse products that can be processed to produce biofuel, biochemical, nutraceuticals, feed, biofertilizer and other value added products. But due to low biomass productivity and high harvesting cost, microalgae-based production have not received much attention. Therefore, this review provides the state of the art of the microalgae based biorefinery approach to define an economical and sustainable process. The three major segments that need to be considered for economic microalgae biorefinery is low cost nutrient source, efficient harvesting methods and production of by-products with high market value. This review has outlined the use of various wastewater as nutrient source for simultaneous biomass production and bioremediation. Further, it has highlighted the common harvesting methods used for microalgae and also described various products from both raw biomass and delipidified microalgae residues in order to establish a sustainable, economical microalgae biorefinery with a touch of circular bioeconomy. This review has also discussed various challenges to be considered followed by a techno-economic analysis of the microalgae based biorefinery model.

Increasing Phosphorus Uptake Efficiency by Phosphorus-Starved Microalgae for Municipal Wastewater Post-Treatment

Four microalgal species, Chlorella vulgaris, Botryococcus braunii, Ankistrodesmus falcatus, and Tetradesmus obliquus were studied for enhanced phosphorus removal from municipal wastewater after their exposure to phosphorus starvation. Microalgae were exposed to phosphorus starvation conditions for three and five days and then used in a batch experiment to purify an effluent from a small WWTP. After 3-day P-starvation, C. vulgaris biomass growth rate increased by 50% and its PO₄ removal rate reached > 99% within 7 days. B. braunii maintained good biomass growth rate and nutrient removal regardless of the P-starvation. All species showed 2–5 times higher alkaline phosphatase activity increase for P-starved biomass than at the reference conditions, responding to the decline of PO₄ concentration in wastewater and biomass poly-P content. The overall efficiency of biomass P-starvation on enhanced phosphorus uptake was found to be dependent on the species, N/P molar ratio in the wastewater, as well as the biomass P content.

Towards sustainable agriculture with carbon sequestration, and greenhouse gas mitigation using algal biochar

With the increase in the world's population, demand for food and other products is continuously rising. This has put a lot of pressure on the agricultural sector. To fulfill these demands, the utilization of chemical fertilizers and pesticides has also increased. Consequently, to overcome the adverse effects of agrochemicals on our environment and health, there has been a shift towards organic fertilizers or other substitutes, which are ecofriendly and help to maintain a sustainable environment. Microalgae have a very high potential of carbon dioxide (CO₂) capturing and thus, help in mitigating the greenhouse effect. It is the most productive biological system for generating biomass. The high growth rate and higher photosynthetic efficiency of the algal species compared to the terrestrial plants make them a wonderful alternative towards a sustainable environment. Moreover, they could be cultivated in photobioreactors or open ponds, which in turn reduce the demand for arable land. Biochar derived from algae is high in nutrients and exhibits the property of ion exchange. Therefore, it can be utilized for sustainable agriculture by partial substituting the chemical fertilizers that degrade the fertility of the soil in the long run. This review provides a detailed insight on the properties of algal biochar as a potential fertilizer for sustainable agriculture. Application of algal biochar in bio-refinery and its economic aspects, challenges faced and future perspective are also discusses in this study.

Prospects for viruses infecting eukaryotic microalgae in biotechnology

Besides being considered pathogens, viruses are important drivers of evolution and they can shape large ecological and biogeochemical processes, by influencing host fitness, population dynamics, and community structures. Moreover, they are simple systems that can be used and manipulated to be beneficial and useful for biotechnological applications. In this context, microalgae biotechnology is a growing field of research, which investigated the usage of photosynthetic microorganisms for the sustainable production of food, fuel, chemical, and pharmaceutical sectors. Viruses infecting microalgae have become important subject of ecological studies related to marine and aquatic environments only four decades ago when virus-like-particles associated with bloom-forming algae were discovered. These first findings have opened new questions on evolution and identity. To date, 63 viruses that infect eukaryotic microalgae have been isolated and cultured. In this short review we briefly summarize what is known about viruses infecting eukaryotic microalgae, and how acknowledging their importance can shape future research focussed not only on marine ecology and evolutionary biology but also on biotechnological applications related to microalgae cell factories.

Microalgae as Sustainable Bio-Factories of Healthy Lipids: Evaluating Fatty Acid Content and Antioxidant Activity

The demand for sustainable and environmentally friendly food sources and food ingredients is increasing, and microalgae are promoted as a sustainable source of essential and bioactive lipids, with high levels of omega-3 fatty acids (ω-3 FA), comparable to those of fish. However, most FA screening studies on algae are scattered or use different methodologies, preventing a true comparison of its content between microalgae. In this work, we used gas-chromatography mass-spectrometry (GC-MS) to characterize the FA profile of seven different commercial microalgae with biotechnological applications (Chlorella vulgaris, Chlorococcum amblystomatis, Scenedesmus obliquus, Tetraselmis chui, Phaeodactylum tricornutum, Spirulina sp., and Nannochloropsis oceanica). Screening for antioxidant activity was also performed to understand the relationship between FA profile and bioactivity. Microalgae exhibited specific FA profiles with a different composition, namely in the ω-3 FA profile, but with species of the same phylum showing similar tendencies. The different lipid extracts showed similar antioxidant activities, but with a low activity of the extracts of Nannochloropsis oceanica. Overall, this study provides a direct comparison of FA profiles between microalgae species, supporting the role of these species as alternative, sustainable, and healthy sources of essential lipids.

Culture-Free Identification and Metabolic Profiling of Microalgal Single Cells via Ensemble Learning of Ramanomes

Microalgae are among the most genetically and metabolically diverse organisms on earth, yet their identification and metabolic profiling have generally been slow and tedious. Here, we established a reference ramanome database consisting of single-cell Raman spectra (SCRS) from >9000 cells of 27 phylogenetically diverse microalgal species, each under stationary and exponential states. When combined, prequenching ("pigment spectrum" (PS)) and postquenching ("whole spectrum" (WS)) signals can classify species and states with 97% accuracy via ensemble machine learning. Moreover, the biosynthetic profile of Raman-sensitive metabolites was unveiled at single cells, and their interconversion was detected via intra-ramanome correlation analysis. Furthermore, not-yet-cultured cells from the environment were functionally characterized via PS and WS and then phylogenetically identified by Raman-activated sorting and sequencing. This PS-WS combined approach for rapidly identifying and metabolically profiling single cells, either cultured or uncultured, greatly accelerates the mining of microalgae and their products.

Lipids from Microalgae for Cosmetic Applications

In recent years, there has been considerable interest in using microalgal lipids in the food, chemical, pharmaceutical, and cosmetic industries. Several microalgal species can accumulate appreciable lipid quantities and therefore are characterized as oleaginous. In cosmetic formulations, lipids and their derivatives are one of the main ingredients. Different lipid classes are great moisturizing, emollient, and softening agents, work as surfactants and emulsifiers, give consistence to products, are color and fragrance carriers, act as preservatives to maintain products integrity, and can be part of the molecules delivery system. In the past, chemicals have been widely used but today’s market and customers’ demands are oriented towards natural products. Microalgae are an extraordinary source of lipids and other many bioactive molecules. Scientists’ attention to microalgae cultivation for their industrial application is increasing. For the high costs associated, commercialization of microalgae and their products is still not very widespread. The possibility to use biomass for various industrial purposes could make microalgae more economically competitive.

Unconventional high-value products from microalgae: A review

Microalgae have gained significant importance in biotechnology development, providing valuable goods and services in multiple applications. Although there is a rising market for most of these applications, the incorporation and introduction of microalgae into new venues will extend in the near future. These advances are due to the vast biodiversity of microalgal species, recent genetic engineering tools, and culture techniques. There are three main possible approaches for novel algal compounds from: (1) recently isolated yet less known microalgae; (2) selectively stressed conditions; and (3) enzymatically adjusted compounds from conventional molecules. All these approaches can be combined in a specific manner. This review discusses the opportunities, potential and limitations of introducing novel microalgae-based products, and how the recent technologies can be deployed to make these products financially viable. To give an outlook to the future, an analysis of the developments and predicted future market that further enlarge the promise of cultivating microalgae for commercial purposes are considered.

Microalgae as sustainable food and feed sources for animals and humans - Biotechnological and environmental aspects

Offering a potential solution for global food security and mitigating environmental issues caused by the expansion of land-based food production, the carbon-hunger and nutrient-rich microalgae emerged as a sustainable food source for both humans and animals. Other than as an alternative source for protein, microalgae offer its most valuable nutrients, omega-3 and 6 long-chain polyunsaturated fatty acids where the content can compete with that of marine fish with lower chemicals contamination and higher purity. Furthermore, the colorful pigments of microalgae can act as antioxidants together with many other health-improving properties as well as a natural colorant. In addition, the supplementation of algae as animal feed provides plentiful benefits, such as improved growth and body weight, reduced feed intake, enhanced immune response and durability towards illness, antibacterial and antiviral action as well as enrichment of livestock products with bioactive compounds. The significant breakthrough in algal biotechnology has made algae a powerful "cell factory" for food production and lead to the rapid growth of the algal bioeconomy in the food and feed industry. The first overview of this review was to present the general of microalgae and its potential capability. Subsequently, the nutritional compositions of microalgae were discussed together with its applications in human foods and animal feeds, followed by the exploration of their economic feasibility and sustainability as well as market trends. Lastly, both challenges and future perspectives were also discussed.

Microalgal Cell Biofactory-Therapeutic, Nutraceutical and Functional Food Applications

Microalgae are multifaceted photosynthetic microorganisms with emerging business potential. They are present ubiquitously in terrestrial and aquatic environments with rich species diversity and are capable of producing significant biomass. Traditionally, microalgal biomass is being used as food and feed in many countries around the globe. The production of microalgal-based bioactive compounds at an industrial scale through biotechnological interventions is gaining interest more recently. The present review provides a detailed overview of the key algal metabolites, which plays a crucial role in nutraceutical, functional foods, and animal/aquaculture feed industries. Bioactive compounds of microalgae known to exhibit antioxidant, antimicrobial, antitumor, and immunomodulatory effects were comprehensively reviewed. The potential microalgal species and biological extracts against human pathogens were also discussed. Further, current technologies involved in upstream and downstream bioprocessing including cultivation, harvesting, and cell disruption were documented. Establishing microalgae as an alternative supplement would complement the sustainable and environmental requirements in the framework of human health and well-being.

Production of Algal Biomass and High-Value Compounds Mediated by Interaction of Microalgal Oocystis sp. KNUA044 and Bacterium Sphingomonas KNU100

There is growing interest in the production of microalgae-based, high-value by-products as an emerging green biotechnology. However, a cultivation platform for Oocystis sp. has yet to be established. We therefore examined the effects of bacterial culture additions on the growth and production of valuable compounds of the microalgal strain Oocystis sp. KNUA044, isolated from a locally adapted region in Korea. The strain grew only in the presence of a clear supernatant of Sphingomonas sp. KNU100 culture solution and generated 28.57 mg/l/d of biomass productivity. Protein content (43.9 wt%) was approximately two-fold higher than carbohydrate content (29.4 wt%) and lipid content (13.9 wt%). Oocystis sp. KNUA044 produced the monosaccharide fucose (33 μg/mg and 0.94 mg/l/d), reported here for the first time. Fatty acid profiling showed high accumulation (over 60%) of polyunsaturated fatty acids (PUFAs) compared to saturated (29.4%) and monounsaturated fatty acids (9.9%) under the same culture conditions. Of these PUFAs, the algal strain produced the highest concentration of linolenic acid (C18:3 ω3; 40.2%) in the omega-3 family and generated eicosapentaenoic acid (C20:5 ω3; 6.0%), also known as EPA. Based on these results, we suggest that the application of Sphingomonas sp. KNU100 for strain-dependent cultivation of Oocystis sp. KNUA044 holds future promise as a bioprocess capable of increasing algal biomass and high-value bioactive by-products, including fucose and PUFAs such as linolenic acid and EPA.

A Systemic Review on Microalgal Peptides: Bioprocess and Sustainable Applications

Nowadays, microalgal research is predominantly centered on an industrial scale. In general, multipotent bioactive peptides are the advantages over focal points over utilitarian nourishment as well as nutraceuticals. Microalgal peptides are now profoundly connected with biological properties rather than nutritive. Numerous techniques are employed to purify active peptides from algal protein using enzymatic hydrolysis; it is broadly used for numerous favorable circumstances. There is a chance to utilize microalgal peptides for human well-being as nutritive enhancements. This exhaustive survey details the utilization of microalgal peptides as antioxidant, anti-cancerous, anti-hypersensitive, anti-atherosclerotic, and nutritional functional foods. It is also exploring the novel technologies for the production of active peptides, for instance, the use of algal peptides as food for human health discovered restrictions, where peptides are sensitive to hydrolysis protease degradation. This review emphasizes the issue of active peptides in gastrointestinal transit, which has to be solved in the future, and prompt impacts.