A critical review on graphitic carbon nitride (g-C3N4)-based materials: Preparation, modification and environmental application

g-C3N5-dots as fluorescence probes prepared by an alkali-assisted hydrothermal method for cell imaging

Carbon nitride materials have become one of the highly explored carbon-based nanomaterials due to their unique properties. Herein, the novel graphitic carbon nitride quantum dots (g-C3N5-dots) were synthesized using an alkali-assisted hydrothermal method. The proposed strategy was simple, time-saving and the entire synthetic process only takes 60 min. And the prepared g-C3N5-dots showed excellent dispersion and good stability in water. What is more, the g-C3N5-dots displayed bright blue fluorescence with a high quantum yield of 12%. It was found that the g-C3N5-dots exhibited peroxidase-like activity, good biocompatibility and low cytotoxicity and can be successfully applied in cell imaging. The proposed method opens a new and efficient way for the preparation of fluorescent g-C3N5-dots and facilitates g-C3N5-dots for bioimaging and related biological sensing applications.

Selective and effective adsorption of cesium ions by metal hexacyanoferrates (MHCF, M = Cu, Co, Ni) modified chitosan fibrous biosorbent

Selective and effective adsorptive removal of radiocesium is of great importance in terms of nuclear waste management and environmental remediation, but is still challenging because of its radioactive and non-complexing nature. Herein, metal hexacyanoferrates (MHCF, M = Cu, Co, or Ni) modified fibrous chitosan was prepared by multiple sequential adsorption and self-assembly approach, and applied for the selective and effective adsorption of Cs⁺. The physically supported MHCF in chitosan fibers showed good crystallinity and stability, and the obtained fibrous composite has high specific surface area (18.2-29.4 m² g^-1). Moreover, MHCF crystals endowed the fibrous chitosan-based adsorbent with a high adsorption capacity and selectivity towards Cs⁺. Its adsorption kinetic and isotherm performance followed the pseudo second-order model and the Sips model. The q_m value of three fibrous MHCF/chitosan (M = Cu, Co, or Ni) composites was 24.9-70.3 mg g^-1. The fibrous CuHCF/chitosan composite had the highest q_m among the three composites. In summary, the modified chitosan can selectively and effectively remove Cs⁺ from complicated aqueous solutions.

Research progress of photocatalysis for algae killing and inhibition: a review

The healthy development of biodiversity has been threatened frequent water eutrophication. In recent years, photocatalytic technology, which has attracted researchers' attention, not only showed increasing potential in the field of organic pollutant degradation, but also many kinds of photocatalysts were used in the field of red tide pollution control at present, which showed superior ability to inactivate harmful algae and degrade algal toxins. Researches have also explored the mechanisms of photocatalytic algae inhibition. In this study, the current research progress in the field of photocatalytic algae inhibition was systematically discussed from several aspects, such as common types of photocatalysts, modification methods of photocatalysts, types of tested algae for photocatalytic algae inhibition, and action mechanism of inactivated algae cells, so as to provide a certain theoretical basis for further application research of photocatalysts in the field of algae removal in the later period.

Degradation of sulfamethoxazole using PMS activated by cobalt sulfides encapsulated in nitrogen and sulfur co-doped graphene

In this study cobalt sulfides (Co₉S₈) coated on the nitrogen and sulfur co-doped graphene (Co₉S₈@S-N-RG) was firstly prepared and used for degradation of antibiotic sulfamethoxazole (SMX). The results showed that SMX could be completely degraded by Co₉S₈@S-N-RG-activated peroxymonosulfate (PMS) within 20 min with its mineralization efficiency of 38.7%. The SMX degradation rate followed pseudo first-order kinetics with kinetic constant of 0.377 min^-1 that was higher than that induced by Co₉S₈, N-RG, S-N-RG and Co₉S₈@S-RG, indicating Co₉S₈@S-N-RG had superior catalytic activity. Co₉S₈@S-N-RG can activate PMS to produce sulfate radicals and hydroxyl radicals, while sulfate radicals played major role. Co₉S₈ participated in PMS activation in which Co²⁺ was involved in sulfate radicals formation, while sulfur species facilitated the conversion of Co³⁺ to Co²⁺. In addition, carbon defects, CO, pyridinic N and pyrrolic N also contributed to PMS activation.The superior catalytic activity was attributed to the synergistic effect of Co₉S₈ and S-N-RG. This study could provide an efficient and stable PMS activator, and insight into the PMS activation mechanism by Co₉S₈@S-N-RG.

Adsorption of Co2+ and Sr2+ in aqueous solution by a novel fibrous chitosan biosorbent

In this study, a novel fibrous chitosan biosorbent was prepared using LiOH/KOH/urea/H₂O (4.5:7:8:80.5 by weight) as spinning solvent. The fibrous chitosan exhibited a higher adsorption capacity and a faster adsorption rate for Co²⁺ and Sr²⁺, compared with spherical chitosan due to its high specific surface area (16.9 m² g^-1), uniform fineness (24.1 μm), and good mechanical strength. The adsorption capacity of fibrous chitosan for Co²⁺ and Sr²⁺ was 31.3 mg g^-1 and 20.0 mg g^-1, respectively, which was higher than that of spherical chitosan (22.5 mg g^-1for Co²⁺ and 8.9 mg g^-1 for Sr²⁺). The coordination between -NH₂/-OH of chitosan and the nuclide ions was the rate-limiting step. The improvement of adsorption performance was due to the higher specific surface area which increased the exposure degree of functional groups (adsorptive sites). This new wet-spun fibrous chitosan biosorbent showed great potential in the adsorptive removal of nuclides ions from aqueous solution.

Recent Progress in the Development of MOF-Based Photocatalysts for the Photoreduction of Cr(VI)

There has been a direct correlation between the rate of industrial development and the spread of pollution on Earth, particularly in the last century. The organic and inorganic pollutants generated from industrial activities have created serious risks to human life and the environment. The concept of sustainability has emerged to tackle the environmental issues in developing chemical-based industries. However, pollutants have continued to be discharged to water resources, and finding appropriate techniques for the removal and remedy of wastewater is in high demand. Chromium is one of the high-risk heavy metals in industrial wastewaters that should be removed via physical adsorption and/or transformed into less hazardous chemicals. Photocatalysis as a sustainable process has received considerable attention as it utilizes sunlight irradiation to remedy Cr^(VI) via a cost-effective process. Numerous photocatalytic systems have been developed up to now, but metal-organic frameworks (MOFs) have gained growing attention because of their unique versatilities and facile structural modulations. A variety of MOF-based photocatalysts have been widely employed for the photoreduction of Cr^(VI). Here, we review the recent progress in the design of MOF photocatalysts and summarize their performance in photoreduction reactions.

Advances in Biologically Applicable Graphene-Based 2D Nanomaterials

Climate change and increasing contamination of the environment, due to anthropogenic activities, are accompanied with a growing negative impact on human life. Nowadays, humanity is threatened by the increasing incidence of difficult-to-treat cancer and various infectious diseases caused by resistant pathogens, but, on the other hand, ensuring sufficient safe food for balanced human nutrition is threatened by a growing infestation of agriculturally important plants, by various pathogens or by the deteriorating condition of agricultural land. One way to deal with all these undesirable facts is to try to develop technologies and sophisticated materials that could help overcome these negative effects/gloomy prospects. One possibility is to try to use nanotechnology and, within this broad field, to focus also on the study of two-dimensional carbon-based nanomaterials, which have excellent prospects to be used in various economic sectors. In this brief up-to-date overview, attention is paid to recent applications of graphene-based nanomaterials, i.e., graphene, graphene quantum dots, graphene oxide, graphene oxide quantum dots, and reduced graphene oxide. These materials and their various modifications and combinations with other compounds are discussed, regarding their biomedical and agro-ecological applications, i.e., as materials investigated for their antineoplastic and anti-invasive effects, for their effects against various plant pathogens, and as carriers of bioactive agents (drugs, pesticides, fertilizers) as well as materials suitable to be used in theranostics. The negative effects of graphene-based nanomaterials on living organisms, including their mode of action, are analyzed as well.

Simultaneous biological removal of nitrogen and phosphorus from secondary effluent of wastewater treatment plants by advanced treatment: A review

With the advancement of water ecological protection and water control standard, it is the general trend to upgrade the wastewater treatment plants (WWTPs). The simultaneous removal of nitrogen and phosphorus is the key to improve the water quality of secondary effluent of WWTPs to prevent the eutrophication. Therefore, it is urgent to develop the applicable technologies for simultaneous biological removal of nitrogen and phosphorus from secondary effluent. In this review, the composition of secondary effluent from municipal WWTPs were briefly introduced firstly, then the three main treatment processes for simultaneous nitrogen and phosphorus removal, i.e., the enhanced denitrifying phosphorus removal filter, the pyrite-based autotrophic denitrification and the microalgae biological treatment system were summarized, their performances and mechanisms were analyzed. The influencing factors and microbial community structure were discussed. The advanced removal of nitrogen and phosphorus by different technologies were also compared and summarized in terms of performance, operational characteristics, disadvantage and cost. Finally, the challenges and future prospects of simultaneous removal of nitrogen and phosphorus technologies for secondary effluent were proposed. This review will deepen to understand the principles and applications of the advanced removal of nitrogen and phosphorus and provide some valuable information for upgrading the treatment process of WWTPs.

Photocatalytic Degradation of Fluoroquinolone Antibiotics in Solution by Au@ZnO-rGO-gC3N4 Composites

The photocatalytic degradation of two quinolone-type antibiotics (ciprofloxacin and levofloxacin) in aqueous solution was studied, using catalysts based on ZnO nanoparticles, which were synthesized by a thermal procedure. The efficiency of ZnO was subsequently optimized by incorporating different co-catalysts of gC3N4, reduced graphene oxide, and nanoparticles of gold. The catalysts were fully characterized by electron microscopy (TEM and SEM), XPS, XRD, Raman, and BET surface area. The most efficient catalyst was 10%Au@ZnONPs-3%rGO-3%gC3N4, obtaining degradations of both pollutants above 96%. This catalyst has the largest specific area, and its activity was related to a synergistic effect, involving factors such as the surface of the material and the ability to absorb radiation in the visible region, mainly produced by the incorporation of rGO and gC3N4 in the semiconductor. The use of different scavengers during the catalytic process, was used to establish the possible photodegradation mechanism of both antibiotics.

Zinc ferrite-graphitic carbon nitride nanohybrid for photo-catalysis of the antibiotic ciprofloxacin

2D hybrid sheets of zinc ferrite and graphitic carbon nitride were explored for their application as a UV catalyst for the degradation of ciprofloxacin.