Recent approaches for the treatment of periodontitis

Solvent exchange-induced in situ forming gel comprising ethyl cellulose-antimicrobial drugs

Solvent-exchanged in situ forming gel is a drug delivery system which is in sol form before administration. When it contacts with the body fluid, then the water miscible organic solvent dissipates and water penetrates into the system, leading the polymer precipitation as in situ gel at the site of injection. The aim of this research was to study the parameters affecting the gel properties, drug release and antimicrobial activities of the in situ forming gels prepared from ethyl cellulose (EC) dissolved in N-methyl pyrrolidone (NMP) to deliver the antimicrobial agents (doxycycline hyclate, metronidazole and benzyl peroxide) for periodontitis treatment. The gel appearance, pH, viscosity, rheology, syringeability, gel formation, rate of water diffusion into the gels, in vitro degradation, drug release behavior and antimicrobial activities against Staphylococcus aureus, Escherichia coli, Candida albicans, Streptococcus mutans and Porphyrommonas gingivalis were determined. Increasing the amount of EC increased the viscosity of system while still exhibiting Newtonian flow and increased the work of syringeability whereas decreased the releasing of drug. The system transformed into the rigid gel formation after being injected into the simulated gingival crevicular fluid. The developed systems containing 5% w/w antimicrobial agent showed the antimicrobial activities against all test bacteria. Thus the developed solvent exchange-induced in situ forming gels comprising EC-antimicrobial drugs exhibited potential use for periodontitis treatment.

Metrodidazole In Situ Forming Eudragit RS Gel Comprising Different Solvents

In situforming gel with solvent exchange mechanism is one of drug delivery systems for periodontitis treatment. The system is injected into the desired site then transforms into a gel state when the solvent diffuses out and aqueous diffuses in. Thein situforming Eudragit RSgels loading 1, 5 and 10%w/w metronidazole (MT) were developed in this study usingN-methyl pyrrolidone (NMP), 2-pyrrolidone and dimethyl sulfoxide (DMSO) as solvent. The viscosity of the gel systems in all solvents were increased as drug or polymer amount was increased with Newtonian flow behavior. Transformation into gel was evident after initiated the systems in phosphate buffer pH 6.8. NMP systems exhibited the lowest work of syringeability through 18 G syringe. Drug release from dialysis tube of DMSO systems was slower than that of NMP and 2-pyrrolidone systems, respectively. Antimicrobial activity againstStaphylococcus aureusof the systems comprising MT using NMP as solvent was greater than that using 2-pyrrolidone and DMSO, respectively, which the antimicrobial activity was increased as the drug amount was increased. Therefore, the solvent type affected the viscosity, gel formation, syringeability, drug release and antimicrobial activity of Eudragit RS systems. These developed systems sustained the drug release and inhibited the bacterial growth hence they were interesting systems for periodontitis treatment.

Biology of Bone Tissue: Structure, Function, and Factors That Influence Bone Cells

Bone tissue is continuously remodeled through the concerted actions of bone cells, which include bone resorption by osteoclasts and bone formation by osteoblasts, whereas osteocytes act as mechanosensors and orchestrators of the bone remodeling process. This process is under the control of local (e.g., growth factors and cytokines) and systemic (e.g., calcitonin and estrogens) factors that all together contribute for bone homeostasis. An imbalance between bone resorption and formation can result in bone diseases including osteoporosis. Recently, it has been recognized that, during bone remodeling, there are an intricate communication among bone cells. For instance, the coupling from bone resorption to bone formation is achieved by interaction between osteoclasts and osteoblasts. Moreover, osteocytes produce factors that influence osteoblast and osteoclast activities, whereas osteocyte apoptosis is followed by osteoclastic bone resorption. The increasing knowledge about the structure and functions of bone cells contributed to a better understanding of bone biology. It has been suggested that there is a complex communication between bone cells and other organs, indicating the dynamic nature of bone tissue. In this review, we discuss the current data about the structure and functions of bone cells and the factors that influence bone remodeling.

Synthesis of piroxicam loaded novel electrospun biodegradable nanocomposite scaffolds for periodontal regeneration

Development of biodegradable composites having the ability to suppress or eliminate the pathogenic micro-biota or modulate the inflammatory response has attracted great interest in order to limit/repair periodontal tissue destruction. The present report includes the development of non-steroidal anti-inflammatory drug encapsulated novel biodegradable chitosan (CS)/poly(vinyl alcohol) (PVA)/hydroxyapatite (HA) electro-spun (e-spun) composite nanofibrous mats and films and study of the effect of heat treatment on fibers and films morphology. It also describes comparative in-vitro drug release profiles from heat treated and control (non-heat treated) nanofibrous mats and films containing varying concentrations of piroxicam (PX). Electrospinning was used to obtain drug loaded ultrafine fibrous mats. The physical/chemical interactions were evaluated by Fourier Transform Infrared (FT-IR) spectroscopy. The morphology, structure and pore size of the materials were investigated by scanning electron microscopy (SEM). The thermal behavior of the materials was investigated by thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). Control (not heat treated) and heat treated e-spun fibers mats and films were tested for in vitro drug release studies at physiological pH7.4 and initially, as per requirement burst release patterns were observed from both fibers and films and later sustained release profiles were noted. In vitro cytocompatibility was performed using VERO cell line of epithelial cells and all the synthesized materials were found to be non-cytotoxic. The current observations suggested that these materials are potential candidates for periodontal regeneration.

Advanced biomaterials and their potential applications in the treatment of periodontal disease

Periodontal disease is considered as a widespread infectious disease and the most common cause of tooth loss in adults. Attempts for developing periodontal disease treatment strategies, including drug delivery and regeneration approaches, provide a useful experimental model for the evaluation of future periodontal therapies. Recently, emerging advanced biomaterials including hydrogels, films, micro/nanofibers and particles, hold great potential to be utilized as cell/drug carriers for local drug delivery and biomimetic scaffolds for future regeneration therapies. In this review, first, we describe the pathogenesis of periodontal disease, including plaque formation, immune response and inflammatory reactions caused by bacteria. Second, periodontal therapy and an overview of current biomaterials in periodontal regenerative medicine have been discussed. Third, the roles of state-of-the-art biomaterials, including hydrogels, films, micro/nanofibers and micro/nanoparticles, developed for periodontal disease treatment and periodontal tissue regeneration, and their fabrication methods, have been presented. Finally, biological properties, including biocompatibility, biodegradability and immunogenicity of the biomaterials, together with their current applications strategies are given. Conclusive remarks and future perspectives for such advanced biomaterials are discussed.

A mini-review on novel intraperiodontal pocket drug delivery materials for the treatment of periodontal diseases

Periodontal disease is defined as chronic inflammatory condition characterized by the destruction of the periodontal tissues causing loss of connective tissue attachment, loss of alveolar bone, and the formation of pathological pockets around the diseased teeth. The use of systemic antibiotics has been advocated for its treatment, but concerns emerged with respect to adverse drug reactions and its contribution to bacterial resistance. Thus local drug delivery devices have been developed that aim to deliver a high concentration of antimicrobial drugs directly to the affected site, while minimizing drug's systemic exposure. A burst release of antimicrobial agent from carrier, resulting in a short and inadequate exposure of bacteria residing in periodontal pocket to the agent, remains the main challenge of current local delivery systems for the treatment of periodontal disease. This review aims to investigate and compare different local antimicrobial delivery systems with regard to the treatment of periodontal disease.

Tailored sequential drug release from bilayered calcium sulfate composites

The current standard for treating infected bony defects, such as those caused by periodontal disease, requires multiple time-consuming steps and often multiple procedures to fight the infection and recover lost tissue. Releasing an antibiotic followed by an osteogenic agent from a synthetic bone graft substitute could allow for a streamlined treatment, reducing the need for multiple surgeries and thereby shortening recovery time. Tailorable bilayered calcium sulfate (CS) bone graft substitutes were developed with the ability to sequentially release multiple therapeutic agents. Bilayered composite samples having a shell and core geometry were fabricated with varying amounts (1 or 10 wt.%) of metronidazole-loaded poly(lactic-co-glycolic acid) (PLGA) particles embedded in the shell and simvastatin directly loaded into either the shell, core, or both. Microcomputed tomography showed the overall layered geometry as well as the uniform distribution of PLGA within the shells. Dissolution studies demonstrated that the amount of PLGA particles (i.e., 1 vs. 10 wt.%) had a small but significant effect on the erosion rate (3% vs. 3.4%/d). Mechanical testing determined that introducing a layered geometry had a significant effect on the compressive strength, with an average reduction of 35%, but properties were comparable to those of mandibular trabecular bone. Sustained release of simvastatin directly loaded into CS demonstrated that changing the shell to core volume ratio dictates the duration of drug release from each layer. When loaded together in the shell or in separate layers, sequential release of metronidazole and simvastatin was achieved. By introducing a tunable, layered geometry capable of releasing multiple drugs, CS-based bone graft substitutes could be tailored in order to help streamline the multiple steps needed to regenerate tissue in infected defects.

Local delivery of minocycline-loaded PEG-PLA nanoparticles for the enhanced treatment of periodontitis in dogs

Background

Rapid local drug clearance of antimicrobials is a major drawback for the treatment of chronic periodontitis. In the study reported here, minocycline-loaded poly(ethylene glycol)-poly(lactic acid) nanoparticles were prepared and administered locally for long drug retention and enhanced treatment of periodontitis in dogs.

Methods

Biodegradable poly(ethylene glycol)-poly(lactic acid) was synthesized to prepare nanoparticles using an emulsion/solvent evaporation technique. The particle size and zeta potential of the minocycline-loaded nanoparticles (MIN-NPs) were determined by dynamic light scattering and the morphology of the nanoparticles was observed by transmission electron microscopy. The in vitro release of minocycline from MIN-NPs and in vivo pharmacokinetics of minocycline in gingival crevice fluid, after local administration of MIN-NPs in the periodontal pockets of beagle dogs with periodontitis, were investigated. The anti-periodontitis effects of MIN-NPs on periodontitis-bearing dogs were finally evaluated.

Results

Transmission electron microscopy examination and dynamic light scattering results revealed that the MIN-NPs had a round shape, with a mean diameter around 100 nm. The in vitro release of minocycline from MIN-NPs showed a remarkably sustained releasing characteristic. After local administration of the MIN-NPs, minocycline concentration in gingival crevice fluid decreased slowly and retained an effective drug concentration for a longer time (12 days) than Periocline^®. Anti-periodontitis effects demonstrated that MIN-NPs could significantly decrease symptoms of periodontitis compared with Periocline and minocycline solution. These findings suggest that MIN-NPs might have great potential in the treatment of periodontitis.

Thermosensitive periodontal sol of ciprofloxacin hydrochloride and serratiopeptidase: Pharmaceutical and mechanical analysis

AIM

The aim of the present work was to explore the development of a dual-controlled release periodontal system of a potent broad spectrum first-generation fluoroquinolone, ciprofloxacin, and the anti-inflammatory enzyme serratiopeptidase (STP).

MATERIALS AND METHODS

Based on 3(2) full factorial design, thermoreversible periodontal sols capable of controlled dual delivery of ciprofloxacin hydrochloride and STP were designed using pluronic F127 and carbopol 934P as thermosensitive gelling polymers. Sol gel transition characteristics, %cumulative drug release at 48(th) h and exvivo mucoadhesive strength were designated as dependent responses. The sols were mucoadhesive, syringeable, and inverted into gels at simulated periodontal cavity temperature.

RESULTS

F9 with optimal drug release was identified as the best formulation. Extra design check point generated using Design Expert software 8.02 (Stat-Ease, USA) validated the experimental design. Textural analysis revealed that the developed sols were syringeable and spreadable enough for periodontal treatment so it can be expected that hardness and compressibility of sols would pose no problem during clinical application. The in vitro release behavior exhibited controlled release of both cipro HCl and STP (>90% release).

CONCLUSION

A dual-controlled release thermoreversible periodontal sol of ciproflaxin and STP was successfully developed. Incorporation of STP as anti-inflammatory agent has the potential of developing a therapeutically efficacious system of cipro HCl for treatment of periodontal inflammatory anaerobic infections.

Drug-releasing implants: current progress, challenges and perspectives

This review presents the different types and concepts of drug-releasing implants using new nanomaterials and nanotechnology-based devices.

In situ forming implants for the delivery of metronidazole to periodontal pockets: formulation and drug release studies

This study was performed to obtain prolonged drug release with biodegradable in situ forming implants for the local delivery of metronidazole to periodontal pockets. The effect of polymer type (capped and uncapped PLGA), solvent type (water-miscible and water-immiscible) and the polymer/drug ratio on in vitro drug release studies were investigated. In situ implants with sustained metronidazole release and low initial burst consisted of capped PLGA and N-methyl-2-pyrolidone as solvent. Mucoadhesive polymers were incorporated into the in situ implants in order to modify the properties of the delivery systems towards longer residence times in vivo. Addition of the polymers changed the adhesiveness and increased the viscosity and drug release of the formulations. However, sustained drug release over 10 days was achievable. Biodegradable in situ forming implants are therefore an attractive delivery system to achieve prolonged release of metronidazole at periodontal therapy.

Effect of ethylcellulose and propylene glycol on the controlled-release performance of glyceryl monooleate-mertronidazole periodontal gel

Controlled-release metronidazole, mucoadhesive gel proposed as a drug-delivery system for periodontal application was developed and characterized. The system was based on a mixture of glycerylmonooleate (GMO) and ethylcellulose (EC). The mechanism of release depends: firstly, on the ability of GMO to form a viscous liquid crystalline mesophases and secondly on the solubilized EC to form a hydrophobic network when the mixture comes into contact with water resulting in sustaining the release of the drug. Ethylcellulose dissolved in GMO had a profound influence on the rate of drug release, reduced the initial drug release and prolonged the sustained release of metronidazole. Propylene glycol (PG) was added to increase the solubility of the drug and water was added with PG to control the viscosity. A controlled release formulation containing w/w, 20% metronidazole, 10% PG, 5% water and 65% GMO that contains 7% EC was found to be mucoadhesive, easily injectable at room temperature, and to follow Fickian diffusion release mechanism. When the drug loading was increased the drug release was accelerated, and the mechanism followed anomalous controlled-release mechanism. Stability studies indicated that the formulation should be stored at 4 °C in a dark place.

Prolonged delivery of ciprofloxacin and diclofenac sodium from a polymeric fibre device for the treatment of periodontal disease

In vitro analysis of drug release and antimicrobial activity of the coblended crosslinked polymeric fibre device (PFD) were investigated. The fibre loaded with ciprofloxacin and diclofenac sodium was comprised of alginate and glycerol crosslinked with barium cations. The pH dependent drug release was evident with ciprofloxacin and diclofenac sodium diffusing from the fibre at pH 4.0 compared to pH 6.8, where the fibre swelled and eroded resulting in zero-order drug release. Agar diffusion studies followed by minimum inhibitory assays were conducted to determine the antimicrobial activity of the device against Escherichia coli, Enterococcus faecalis, and Streptococcus mutans. The antimicrobial activity of the PFD was confirmed in both test assays against all test pathogens. The MIC ranges at pH 4.0 for E. coli, E. faecalis, and S. mutans were 0.5-0.8, 0.4-1.1, and 0.7-2.1 μg/mL, respectively. At pH 6.8, similar efficacies (0.3-0.5 μg/mL for E. coli and E. faecalis and 0.6-1.0 μg/mL for S. mutans) were observed. The effect of varying the plasticizer and crosslinking ion concentration on drug release profile of the fibers was further elucidated and conceptualized using molecular mechanics energy relationships (MMER) and by exploring the spatial disposition of geometrically minimized molecular conformations.

Bioavailability enhancers of herbal origin: an overview

Recently, the use of herbal medicines has been increased all over the world due to their therapeutic effects and fewer adverse effects as compared to the modern medicines. However, many herbal drugs and herbal extracts despite of their impressive in-vitro findings demonstrates less or negligible in-vivo activity due to their poor lipid solubility or improper molecular size, resulting in poor absorption and hence poor bioavailability. Nowadays with the advancement in the technology, novel drug delivery systems open the door towards the development of enhancing bioavailability of herbal drug delivery systems. For last one decade many novel carriers such as liposomes, microspheres, nanoparticles, transferosomes, ethosomes, lipid based systems etc. have been reported for successful modified delivery of various herbal drugs. Many herbal compounds including quercetin, genistein, naringin, sinomenine, piperine, glycyrrhizin and nitrile glycoside have demonstrated capability to enhance the bioavailability. The objective of this review is to summarize various available novel drug delivery technologies which have been developed for delivery of drugs (herbal), and to achieve better therapeutic response. An attempt has also been made to compile a profile on bioavailability enhancers of herbal origin with the mechanism of action (wherever reported) and studies on improvement in drug bioavailability, exhibited particularly by natural compounds.

Benzoyl Peroxide In Situ Forming Antimicrobial Gel for Periodontitis Treatment

Periodontitis is an inflammatory disease of the supporting structures of the tooth caused by bacterial infection which can result in tooth loss. The local intra-pocket drug delivery system was interesting and highly effective for periodontitis treatment. In situ forming gel system is the polymeric solution which could transform into gel for localizing and sustaining the drug release at desired site. This system has been recommended as one of suitable delivery system for this purpose. Benzoyl peroxide (BPO) in situ forming gels were developed using Eudragit RS as polymer dispersed in N-methyl-pyrrolidone (NMP). Peppermint oil and polyethylene glycol 1500 were also incorporated as the excipients. The prepared systems were evaluated for rheology, syringeability (using texture analyzers), in situ gel formation (after injection into PBS pH 6.8), antimicrobial activity (against Streptococcus mutans with agar diffusion) and drug release (with dialysis method in PBS pH 6.8 at 50 rpm, 37 °C). The viscosity and syringeability of the prepared systems was increased as the amount of BPO, peppermint oil or PEG 1500 was increased. All prepared gels showed the Newtonian flow which the viscosity was decreased as the temperature was increased. All prepared gels comprising peppermint oil and PEG 1500 could form in situ gel in used medium which the pH was close to the environment pH of periodontal pocket. The inhibition zone against Streptococcus mutans of the prepared system was significantly decreased when the peppermint oil and PEG 1500 was incorporated owing to the higher viscous environment and thereafter retardation of drug diffusion was evident. This effect could prolong the drug release. From drug release test, all prepared gels could sustain the BPO release for at least 96 hrs. Release kinetic obtained from curve fitting with various release equations using least square fit technique indicated that the release patterns were as Higuchi’s model therefore the release of BPO was performed with diffusion control. This developed BPO in situ forming gel presented its ability as the controlled drug delivery system for localized antimicrobial activity at periodontal pocket.

Inhibitory effect of Zingiber cassumunar extracts on lipopolysaccharide-induced cyclooxygenase-2 and matrix metalloproteinase expression in human gingival fibroblasts

BACKGROUND AND OBJECTIVE

Lipopolysaccharides (LPS) induce the production of proinflammatory mediators such as prostaglandins and matrix metalloproteinases (MMPs) in human gingival fibroblasts (HGFs). Zingiber cassumunar is a medicinal plant that possesses anti-inflammatory properties. The aim of this study was to determine the effects of the Z. cassumunar extract on the expression of cyclooxygenase (COX)-1, COX-2 and MMP-2 in HGFs challenged with LPS.

MATERIAL AND METHODS

HGFs were treated with LPS in the presence or absence of Z. cassumunar extracts. The levels of expression of COX-1, COX-2 and MMP-2 mRNAs and of COX-1, COX-2 and MMP-2 proteins were detected by reverse transcription-polymerase chain reaction and western blotting, respectively. MMP-2 activities in cell-culture supernatants were determined using gelatin zymography. MAPK activation was evaluated by western blotting.

RESULTS

LPS treatment of HGFs resulted in the activation of ERK1/2, p38 and JNK. Z. cassumunar extracts significantly inhibited the phosphorylation of ERK1/2 and JNK in HGFs stimulated with LPS. A lesser inhibitory effect was observed for the phosphorylation of p38. RT-PCR and western blot analyses showed that Z. cassumunar extracts inhibited the LPS-induced expression of COX-2 mRNA and COX-2 protein, respectively, but not of COX-1 mRNA or COX-1 protein. Pretreatment of HGFs with Z. cassumunar also attenuated the induction of MMP-2 with LPS.

CONCLUSION

Our results indicate that Z. cassumunar extracts inhibit COX-2 and MMP-2 production by LPS-activated human gingival fibroblasts through blocking the proinflammatory signaling pathway involving ERK1/2, JNK and p38.

Prediagnostic plasma antibody levels to periodontopathic bacteria and risk of coronary heart disease

Many epidemiological studies have indicated that periodontitis is an important risk factor for coronary heart disease (CHD). We examined whether plasma antibody levels to 3 major periodontal pathogens, Aggregatibacter actinomycetemcomitans, Porphyromonas gingivalis, and Prevotella intermedia predicted the risk of CHD events. A nested case-control research design (case: n = 191, control: n = 382), by matching gender, age, study area, date of blood collection, and time since last meal at blood collection, was employed in a large cohort of Japanese community residents.Antibody levels of periodontopathic bacteria were associated with risk of CHD after adjusting for BMI, smoking status, alcohol intake, history of hypertension, history of diabetes mellitus, exercise during leisure time, and perceived mental stress. The association was different by age subgroup. For subjects aged 40-55 years, the medium (31.7-184.9 U/mL) or high tertile plasma antibody level (> 184.9 U/mL) of A. actinomycetemcomitans showed higher risk of CHD (medium: OR = 3.72; 95% CI = 1.20-11.56, high: OR = 4.64; 95% CI = 1.52-14.18) than the low tertile level (< 31.7 U/mL). The ORs of CHD incidence became higher with an increase in IgG level of A. actinomycetemcomitans (P for trend = 0.007). For subjects aged 56-69 years, the high tertile level (> 414.1 U/mL) of P. intermedia was associated with higher risk of CHD (OR = 2.65; 95% CI = 1.18-5.94) in a dose-response fashion (P for trend = 0.007). The possible role of periodontopathic bacteria as a risk factor for CHD incidence was suggested by the results of this study by the elevated antibody level to these bacteria with the increased risk of CHD.

Formulation and evaluation of in situ forming PLA implant containing tinidazole for the treatment of periodontitis

Periodontitis is caused by periodontopathic bacteria and antibacterial agents are placed in a periodontal pocket with the intention of enhancing the local effect. To maximize the therapeutic effects while reducing the adverse effects, tinidazole was delivered by in situ forming system. One approach for reducing burst release rate was to testify in situ forming effect. The effect of 0%-10% (w/w) polyethylene glycol 400 and 3% (w/w) glycerol on the tinidazole release from a poly(DL-lactide) (PLA) injectable implant was evaluated. The results showed that the in vitro initial burst release rate was decreased in the presence of poly(ethyleneglycol) PEG 400 and glycerol. A formulation containing 30% (w/w) PLA (M(w) 7300) dissolved in 62% (w/w) N-methyl-2-pyrrolidone, 5% (w/w) PEG 400, and 3%(w/w) glycerol with 5% (w/w) tinidazole was shown to be optimum. Twelve adult beagle dogs were used in the periodontitis model. The treatment group I, II, and positive control group was administrated with gel containing 5%(w/w) tinidazole, 2.5%(w/w) tinidazole, and periocline, respectively. Dog studies revealed that periocline and the developed formulation could significantly decrease symptoms of periodontitis, and they were better than gel containing 2.5% (w/w) tinidazole. The developed formulation could sustain the release of tinidazole for local delivery over 7 days. These findings suggested that the developed formulation was a viable alternative to conventional drug to cure periodontitis.

Treatment modalities and evaluation models for periodontitis

Periodontitis is the most common localized dental inflammatory disease related with several pathological conditions like inflammation of gums (gingivitis), degeneration of periodontal ligament, dental cementum and alveolar bone loss. In this perspective, the various preventive and treatment modalities, including oral hygiene, gingival irrigations, mechanical instrumentation, full mouth disinfection, host modulation and antimicrobial therapy, which are used either as adjunctive treatments or as stand-alone therapies in the non-surgical management of periodontal infections, have been discussed. Intra-pocket, sustained release systems have emerged as a novel paradigm for the future research. In this article, special consideration is given to different locally delivered anti-microbial and anti inflammatory medications which are either commercially available or are currently under consideration for Food and Drug Administration (FDA) approval. The various in vitro dissolution models and microbiological strain investigated to impersonate the infected and inflamed periodontal cavity and to predict the in vivo performance of treatment modalities have also been thrashed out. Animal models that have been employed to explore the pathology at the different stages of periodontitis and to evaluate its treatment modalities are enlightened in this proposed review.

Sub-Micrometric Liposomes as Drug Delivery Systems in the Treatment and Periodontitis

Periodontitis is a complex disease and bacterial infection is one of the most common factors involved in this disease. Current strategies for the local delivery of antibiotics do not allow a complete clearance of bacteria filling dentinal tubules and this limits their therapeutic efficacy. Therefore, there is a strong need for the development of new delivery strategies aimed at improving the efficacy of antibiotic therapy for periodontitis with special reference to their ability to penetrate into the tubules. The aim of the present study is to develop liposome-based delivery systems of sub-micron dimension, able to diffuse into the dentinal tubules. A further aim of the research is to develop a protocol for enhanced diffusion based on the use of magnetic liposomes and magnetic fields. Liposomes were produced by hydration of a pre-liposomal formulation. The vesicles were stabilised with PEG and their re-sizing was achieved by extrusion. Magnetite nanoparticles were synthesized inside the vesicles, i.e., the chemical reaction involving FeCl2, FeCl3 and NH3 occurred within the core of the newly formed liposomes. Dynamic Light Scattering analysis was performed for size characterization. A mathematical model was implemented to predict the diffusion of the liposomes in dentinal tubules. Ex-vivo validation was performed on extracted human teeth. We produced PEG-ylated liposomes (average size 204.3 nm) and PEG-ylated magnetic liposomes (average size 286 nm) and an iron content of 4.2μg/ml. Through mathematical modelling, we deduced that sub-micrometer vesicles are able to penetrate into dentinal tubules. This penetration is considerably more effective when the vesicles are magnetized and subjected to an external magnetic field which accelerates their movement within the tubules. The liposome-based delivery systems developed by the present study are able to penetrate deeply into the tubules, sometimes reaching their terminal ends.

Therapeutic strategies in the treatment of periodontitis

Periodontitis is a chronic inflammatory process which affects the tooth - supporting structures of the teeth. The disease is initiated by subgingival periopathogenic bacteria in susceptible periodontal sites. The host immune response towards periodontal pathogens helps to sustain periodontal disease and eventual alveolar bone loss. Although scaling and root planing is the standard treatment modality for periodontitis, it suffers from several drawbacks such as the inability to reach the base of deep pockets and doesn’t arrest migration of periodontal pathogens from other sites in the oral cavity. In order to overcome the limitations of scaling and root planning, adjunctive chemotherapeutics and host modulatory agents to the treatment are used. These therapeutic agents show substantial beneficial effects when compared to scaling and root planning alone. This review will cover an update on chemotherapeutic and past and future host immune modulatory agents used adjunctively to treat and manage periodontal diseases.

Improved drug loading and antibacterial activity of minocycline-loaded PLGA nanoparticles prepared by solid/oil/water ion pairing method

Background

Low drug entrapment efficiency of hydrophilic drugs into poly(lactic-co-glycolic acid) (PLGA) nanoparticles is a major drawback. The objective of this work was to investigate different methods of producing PLGA nanoparticles containing minocycline, a drug suitable for periodontal infections.

Methods

Different methods, such as single and double solvent evaporation emulsion, ion pairing, and nanoprecipitation were used to prepare both PLGA and PEGylated PLGA nanoparticles. The resulting nanoparticles were analyzed for their morphology, particle size and size distribution, drug loading and entrapment efficiency, thermal properties, and antibacterial activity.

Results

The nanoparticles prepared in this study were spherical, with an average particle size of 85–424 nm. The entrapment efficiency of the nanoparticles prepared using different methods was as follows: solid/oil/water ion pairing (29.9%) > oil/oil (5.5%) > water/oil/water (4.7%) > modified oil/water (4.1%) > nano precipitation (0.8%). Addition of dextran sulfate as an ion pairing agent, acting as an ionic spacer between PEGylated PLGA and minocycline, decreased the water solubility of minocycline, hence increasing the drug entrapment efficiency. Entrapment efficiency was also increased when low molecular weight PLGA and high molecular weight dextran sulfate was used. Drug release studies performed in phosphate buffer at pH 7.4 indicated slow release of minocycline from 3 days to several weeks. On antibacterial analysis, the minimum inhibitory concentration and minimum bactericidal concentration of nanoparticles was at least two times lower than that of the free drug.

Conclusion

Novel minocycline-PEGylated PLGA nanoparticles prepared by the ion pairing method had the best drug loading and entrapment efficiency compared with other prepared nanoparticles. They also showed higher in vitro antibacterial activity than the free drug.

Toll-like Receptor 4 Expression, Interleukin-6, -8 and Ccl-20 Release, and NF-KB Translocation in Human Periodontal Ligament Mesenchymal Stem Cells Stimulated with LPS-P. Gingivalis

Periodontal diseases, the major public health problem of the oral cavity, are clinically characterized by inflammation of the periodontal connective tissue that ultimately induces the destruction of periodontal tissue and the loss of alveolar bone. In chronic periodontitis, as well as aggressive periodontitis, the anaerobic gram-negative bacterium Porphyromonas gingivalis (P. gingivalis) is implicated. The pathogenicity of P. gingivalis is exerted by a wide variety of factors, including lipopolysaccharides (LPSs). LPSs activate the innate immune response during Gram-negative bacterial infections through the Toll-like receptor 4 (TLR-4)/myeloid differentiation protein 2 (MD-2) complex. In this study, the expression of TLR-4, the cell growth, the cytokine release, and the nuclear factor-KB (NF-kB) transcription factor expression in response to LPS- P.Gingivalis (LPS-G) were examined in Human Periodontal Ligament Mesenchymal Stem Cells (PDL-MSCs). The results obtained demonstrate that, in basal conditions, human PDL-MSCs express high levels of TLR-4. In inflammatory conditions mimicked by LPS-G challenge, the MTT assay carried out at different treatment times demonstrated the decrease of the cell growth. Moreover, the recognition of P. gingivalis components by TLR-4 culminated with the activation of secretion of inflammatory mediators such as: IL-6, IL-8 and CCL-20, and with the up-regulation of NF-kB, which was translocated into the nucleus. Our data intended to specify that TLR-4 expressed by PDL-MSCs is functional and plays a key role in inflammation.

In vitro and in vivo investigation of drug-eluting implants for the treatment of periodontal disease

This paper developed solvent-free drug-eluting implants for metronidazole delivery for the treatment of periodontal disease and investigated the characteristics of the drug's release from the implants, both in vitro and in vivo, using an HPLC assay. The metronidazole exhibited a two-stage release behavior in vitro with an initial burst release followed by a diffusion-controlled release and then a secondary burst release. The accumulated drug release reached 100% on the 18th day, and the drug-eluting implant was totally dissolved on the same day. Additionally, the drug-eluting disks were implanted within the sub-gingival space of both lower incisors of six rabbits. The curve of in vivo drug release was smoother and showed a predominantly diffusion-controlled release. The implants were totally dissolved at 2 weeks after implantation. The concentration of metronidazole remained above the MIC(90) during the entire investigation.

Periodontal pharmacotherapy - an updated review

Periodontal disease is mainly associated with the activity of bacteria which adhere to the tooth surface and form specific structure of bacterial biofilm. Periodontal bacteria cause inflammation of the gums and aggressive immune response, affecting the periodontium. The first phase of initial therapy - mechanical removal of dental plaque and calculus - is necessary. If this non-surgical therapy has proved to be unsuccessful, an alternative treatment with antimicrobial agents is then considered. Pharmacotherapy is based on systemic or local antibiotics and/or antiseptics, which are applied according to the severity of the disease. A number of recent periodontal studies present some of the pharmacological agents, that are directed against bacteria or a host immune response, are often chosen as an adjunct treatment option, but none of these antimicrobials were established as 'a gold standard' in the periodontal treatment. This review provides some present recommendation of pharmacological strategies, with particular emphasis on systemic and local antimicrobial therapy of periodontal disease.

Effect of zein on biodegradable inserts for the delivery of tetracycline within periodontal pockets

Treatment with antibiotics within the periodontal pocket against bacterial infections represents a useful and adjunctive tool to conventional therapy for healing and teeth preservation. With this function in view, an implantable, tetracycline delivery device for the treatment of periodontal disease was developed. The aim of this study was to develop biodegradable, tetracycline-loaded microparticles made of two polymers: PLGA and zein which were compressed into monolithic devices. In this polymer delivery system, the encapsulation efficiency, release characteristics, drug–polymer interaction, and antibacterial activity of loaded drug were investigated. The interaction of tetracycline with the corn protein zein was studied by nuclear magnetic resonance (NMR), Fourier transform infrared, and X-ray diffraction. The hydrophobic interaction of tetracycline with zein in the formulations was deduced from the NMR studies, whereas X-ray diffraction studies showed a new crystalline state of the drug in the presence of the protein. Zein was not denatured by preparation of inserts. Sustained release of tetracycline was obtained, and the proportion of zein in the inserts had a great impact on the drug release. Finally, an effective tetracycline release from inserts against Staphylococcus aureus was achieved over 30 days. In conclusion, the PLGA:zein delivery system described in this study was found to be effective in controlled delivery of tetracycline, and hence may be suitable for intra-pocket delivery of antimicrobial agents in the treatment of periodontitis.

LPS induces greater bone and PDL loss in SPARC-null mice

Individuals with periodontal disease have increased risk of tooth loss, particularly in cases with associated loss of alveolar bone and periodontal ligament (PDL). Current treatments do not predictably regenerate damaged PDL. Collagen I is the primary component of bone and PDL extracellular matrix. SPARC/Osteonectin (SP/ON) is implicated in the regulation of collagen content in healthy PDL. In this study, periodontal disease was induced by injections of lipopolysaccharide (LPS) from Aggregatibacter actinomycetemcomitans in wild-type (WT) and SP/ON-null C57/Bl6 mice. A 20-µg quantity of LPS was injected between the first and second molars 3 times a week for 4 weeks, whereas PBS control was injected into the contralateral maxilla. LPS injection resulted in a significant decrease in bone volume fraction in both genotypes; however, significantly greater bone loss was detected in SP/ON-null maxilla. SP/ON-null PDL exhibited more extensive degradation of connective tissue in the gingival tissues. Although total cell numbers in the PDL of SP/ON-null were not different from those in WT, the inflammatory infiltrate was reduced in SP/ON-null PDL. Histology of collagen fibers revealed marked reductions in collagen volume fraction and in thick collagen volume fraction in the PDL of SP/ON-null mice. SP/ON protects collagen content in PDL and in alveolar bone in experimental periodontal disease.

A novel injectable chlorhexidine thermosensitive hydrogel for periodontal application: preparation, antibacterial activity and toxicity evaluation

The aim of this paper was to evaluate the application potential of CS-HTCC/GP-0.1%Chx thermosensitive hydrogel which was synthesized using chitosan (CS), quaternized CS, and alpha,beta-glycerophosphate (alpha,beta-GP) loading with 0.1% chlorhexidine (Chx) (w/v) for periodontal treatment. An aqueous solution of CS-HTCC/GP-0.1%Chx was transformed into hydrogel at 6 min when the temperature was increased to 37 degrees C. The scan electron microscopy (SEM) image of the gel was a porous, loose and crosslinked network. In vitro, Chx released over 18 h from the CS-HTCC/GP thermosensitive hydrogel in artificial saliva pH 6.8. Release rate could be controlled through adjustment of alpha,beta-GP or Chx concentration. CS-HTCC/GP-0.1%Chx thermosensitive hydrogel exhibited excellent inhibitory activity against primary periodontal pathogens. CS-HTCC/GP-0.1%Chx thermosensitive hydrogel had no acute toxicity; the maximum tolerated dose in rats was 400 mg/ml. All results indicated that CS-HTCC/GP-0.1%Chx thermosensitive hydrogel is a strong candidate as a local drug delivery system for periodontal treatment.