Micro- and nanofluidic systems for high-throughput biological screening

Multiplexed detection of nucleic acids in a combinatorial screening chip

Multiplexed diagnostic testing has the potential to dramatically improve the quality of healthcare. Simultaneous measurement of health indicators and/or disease markers reduces turnaround time and analysis cost and speeds up the decision making process for diagnosis and treatment. At present, however, most diagnostic tests only provide information on a single indicator or marker. Development of efficient diagnostic tests capable of parallel screening of infectious disease markers could significantly advance clinical and diagnostic testing in both developed and developing parts of the world. Here, we report the multiplexed detection of nucleic acids as disease markers within discrete wells of a microfluidic chip using molecular beacons and total internal reflection fluorescence microscopy (TIRFM). Using a 4 × 4 array of 200 pL wells, we screened for the presence of four target single stranded oligonucleotides encoding for conserved regions of the genomes of four common viruses: human immunodeficiency virus-1 (HIV-1), human papillomavirus (HPV), Hepatitis A (Hep A) and Hepatitis B (Hep B). Target oligonucleotides are accurately detected and discriminated against alternative oligonucleotides with different sequences. This combinatorial chip represents a versatile platform for the development of clinical diagnostic tests for simultaneous screening, detection and monitoring of a wide range of biological markers of disease and health using minimal sample size.

Creation of stepwise concentration gradient in picoliter droplets for parallel reactions of matrix metalloproteinase II and IX

We present a new methodology for generating a stepwise concentration gradient in a series of microdroplets by using monolithic micro valves that act as "faucets" in micrometer-scale. A distinct concentration gradient of a substrate was generated for the determination of the kinetic parameters of two different enzymes using only 10 picoliter-scale droplets. With a single experiment on a chip, we obtained K(M) and k(cat) values of matrix metalloproteinase 2 (MMP-2) and matrix metalloproteinase 9 (MMP-9), and compared the catalytic competence of the two enzymes. The present system and method are highly suitable for applications where the reagents or samples are limited and precious.

Reproducibility and robustness of a real-time microfluidic cell toxicity assay

Numerous opportunities exist to apply microfluidic technology to high-throughput and high-content cell-based assays. However, maximizing the value of microfluidic assays for applications such as drug discovery, screening, or toxicity evaluation will require assurance of within-device repeatability, day-to-day reproducibility, and robustness to variations in conditions that might occur from laboratory to laboratory. This report describes a study of the performance and variability of a cell-based toxicity assay in microfluidic devices made of poly(dimethylsiloxane) (PDMS). The assay involves expression of destabilized green fluorescent protein (GFP) as a reporter of intracellular protein synthesis and degradation. Reduction in cellular GFP due to inhibition of ribosome activity by cycloheximide (CHX) was quantified with real-time quantitative fluorescence imaging. Assay repeatability was measured within a 64-chamber microfluidic device. Assay performance across a range of cell loading densities within a single device was assessed, as was replication of measurements in microfluidic devices prepared on different days. Assay robustness was tested using different fluorescence illumination sources and reservoir-to-device tubing choices. Both microfluidic and larger scale assay conditions showed comparable GFP decay rates upon CHX exposure, but the microfluidic data provided the higher level of confidence.

High-throughput process development for biopharmaceutical drug substances

Quality by Design (QbD) is gaining industry acceptance as an approach towards development and commercialization of biotechnology therapeutic products that are expressed via microbial or mammalian cell lines. In QbD, the process is designed and controlled to deliver specified quality attributes consistently. To acquire the enhanced understanding that is necessary to achieve the above, however, requires more extensive experimentation to establish the design space for the process and the product. With biotechnology companies operating under ever-increasing pressure towards lowering the cost of manufacturing, the use of high-throughput tools has emerged as a necessary enabler of QbD in a time- and resource-constrained environment. We review this topic for those in academia and industry that are engaged in drug substance process development.

Automated Lead Optimization of MMP-12 Inhibitors Using a Genetic Algorithm

Traditional lead optimization projects involve long synthesis and testing cycles, favoring extensive structure-activity relationship (SAR) analysis and molecular design steps, in an attempt to limit the number of cycles that a project must run to optimize a development candidate. Microfluidic-based chemistry and biology platforms, with cycle times of minutes rather than weeks, lend themselves to unattended autonomous operation. The bottleneck in the lead optimization process is therefore shifted from synthesis or test to SAR analysis and design. As such, the way is open to an algorithm-directed process, without the need for detailed user data analysis. Here, we present results of two synthesis and screening experiments, undertaken using traditional methodology, to validate a genetic algorithm optimization process for future application to a microfluidic system. The algorithm has several novel features that are important for the intended application. For example, it is robust to missing data and can suggest compounds for retest to ensure reliability of optimization. The algorithm is first validated on a retrospective analysis of an in-house library embedded in a larger virtual array of presumed inactive compounds. In a second, prospective experiment with MMP-12 as the target protein, 140 compounds are submitted for synthesis over 10 cycles of optimization. Comparison is made to the results from the full combinatorial library that was synthesized manually and tested independently. The results show that compounds selected by the algorithm are heavily biased toward the more active regions of the library, while the algorithm is robust to both missing data (compounds where synthesis failed) and inactive compounds. This publication places the full combinatorial library and biological data into the public domain with the intention of advancing research into algorithm-directed lead optimization methods.

Analysis of individual molecular events of DNA damage response by flow- and image-assisted cytometry

This chapter describes molecular mechanisms of DNA damage response (DDR) and presents flow- and image-assisted cytometric approaches to assess these mechanisms and measure the extent of DDR in individual cells. DNA damage was induced by cell treatment with oxidizing agents, UV light, DNA topoisomerase I or II inhibitors, cisplatin, tobacco smoke, and by exogenous and endogenous oxidants. Chromatin relaxation (decondensation) is an early event of DDR chromatin that involves modification of high mobility group proteins (HMGs) and histone H1 and was detected by cytometry by analysis of the susceptibility of DNA in situ to denaturation using the metachromatic fluorochrome acridine orange. Translocation of the MRN complex consisting of Meiotic Recombination 11 Homolog A (Mre11), Rad50 homolog, and Nijmegen Breakage Syndrome 1 (NMR1) into DNA damage sites was assessed by laser scanning cytometry as the increase in the intensity of maximal pixel as well as integral value of Mre11 immunofluorescence. Examples of cytometric detection of activation of Ataxia telangiectasia mutated (ATM), and Check 2 (Chk2) protein kinases using phospho-specific Abs targeting Ser1981 and Thr68 of these proteins, respectively are also presented. We also discuss approaches to correlate activation of ATM and Chk2 with phosphorylation of p53 on Ser15 and histone H2AX on Ser139 as well as with cell cycle position and DNA replication. The capability of laser scanning cytometry to quantify individual foci of phosphorylated H2AX and/or ATM that provides more dependable assessment of the presence of DNA double-strand breaks is outlined. The new microfluidic Lab-on-a-Chip platforms for interrogation of individual cells offer a novel approach for DDR cytometric analysis.

Microfluidic DNA microarray analysis: a review

Microarray DNA hybridization techniques have been used widely from basic to applied molecular biology research. Generally, in a DNA microarray, different probe DNA molecules are immobilized on a solid support in groups and form an array of microspots. Then, hybridization to the microarray can be performed by applying sample DNA solutions in either the bulk or the microfluidic manner. Because the immobilized probe DNA binds and retains its complementary target DNA, detection is achieved through the read-out of the tagged markers on the sample target molecules. The recent microfluidic hybridization method shows the advantages of less sample usage and reduced incubation time. Here, sample solutions are confined in microfabricated channels and flow through the probe microarray area. The high surface-to-volume ratio in microchannels of nanolitre volume greatly enhanced the sensitivity as obtained with the bulk solution method. To generate nanolitre flows, different techniques have been developed, and this including electrokinetic control, vacuum suction and syringe pumping. The latter two are pressure-driven methods which are more flexible without the need of considering the physicochemical properties of solutions. Recently, centrifugal force is employed to drive liquid movement in microchannels. This method utilizes the body force from the liquid itself and there are no additional solution interface contacts such as from electrodes or syringes and tubing. Centrifugal force driven flow also features the ease of parallel hybridizations. In this review, we will summarize the recent advances in microfluidic microarray hybridization and compare the applications of various flow methods.

Protein denaturation and protein:drugs interactions from intrinsic protein fluorescence measurements at the nanolitre scale

Protein stability and ligand-binding affinity measurements are widely required for the formulation of biopharmaceutical proteins, protein engineering and drug screening within life science research. Current techniques either consume too much of often precious biological or compound materials, in large sample volumes, or alternatively require chemical labeling with fluorescent tags to achieve measurements at submicrolitre volumes with less sample. Here we present a quantitative and accurate method for the determination of protein stability and the affinity for small molecules, at only 1.5-20 nL optical sample volumes without the need for fluorescent labeling, and that takes advantage of the intrinsic tryptophan fluorescence of most proteins. Coupled to appropriate microfluidic sample preparation methods, the sample requirements could thus be reduced 85,000-fold to just 10(8) molecules. The stability of wild-type FKBP-12 and a destabilizing binding-pocket mutant are studied in the presence and absence of rapamycin, to demonstrate the potential of the technique to both drug screening and protein engineering. The results show that 75% of the interaction energy between FKBP-12 and rapamycin originates from residue Phe99 in the binding site.

Passive self-synchronized two-droplet generation

We describe the use of two passive components to achieve controllable and alternating droplet generation in a microfluidic device. The approach overcomes the problems associated with irregularities in channel dimensions and fluid flow rates, and allows precise pairing of alternating droplets in a high-throughput manner. We study droplet generation and self-synchronization in a quantitative fashion by using high-speed image analysis.

Electrical cell-substrate impedance sensing as a non-invasive tool for cancer cell study

Cell-substrate interactions are investigated in a number of studies for drug targets including angiogenesis, arteriosclerosis, chronic inflammatory diseases and carcinogenesis. One characteristic of malignant cancerous cells is their ability to invade tissue. Cell adhesion and cytoskeletal activity have served as valuable indicators for understanding the cancer cell behaviours, such as proliferation, migration and invasion. This review focuses on bio-impedance based measurement for monitoring the behaviours in real time and without using labels. Electric cell-substrate impedance sensing (ECIS) provides rich information about cell-substrate interactions, cell-cell communication and cell adhesion. High sensitivity of the ECIS method allows for observing events down to single-cell level and achieving nanoscale resolution of cell-substrate distances. Recently, its miniaturization and integration with fluorescent detection techniques have been highlighted as a new tool to deliver a high-content platform for anticancer drug development.

Microfluidic impedance-based flow cytometry

Microfabricated flow cytometers can detect, count, and analyze cells or particles using microfluidics and electronics to give impedance-based characterization. Such systems are being developed to provide simple, low-cost, label-free, and portable solutions for cell analysis. Recent work using microfabricated systems has demonstrated the capability to analyze micro-organisms, erythrocytes, leukocytes, and animal and human cell lines. Multifrequency impedance measurements can give multiparametric, high-content data that can be used to distinguish cell types. New combinations of microfluidic sample handling design and microscale flow phenomena have been used to focus and position cells within the channel for improved sensitivity. Robust designs will enable focusing at high flowrates while reducing requirements for control over multiple sample and sheath flows. Although microfluidic impedance-based flow cytometers have not yet or may never reach the extremely high throughput of conventional flow cytometers, the advantages of portability, simplicity, and ability to analyze single cells in small populations are, nevertheless, where chip-based cytometry can make a large impact.

Using inexpensive Jell-O chips for hands-on microfluidics education

As the field of microfluidics continues to grow, there is an increasing demand for public education about this technology. This article presents a quick, simple, safe, and inexpensive method for teaching microfluidics to younger students and the general public. (To listen to a podcast about this article, please go to the Analytical Chemistry multimedia page at pubs.acs.org/page/ancham/audio/index.html .).

A dynamic microarray device for paired bead-based analysis

In this study, we have developed a meander-shaped dynamic microfluidic technology that allows us to pair two different types of microbeads in a trapping site. The dynamic microfluidic technology comprises implemented modifications of a conventional dynamic microarray design such as: (i) the combination of a meander-shaped by-pass channel and a trapping channel with a hydrodynamic trapping site and (ii) line-symmetrical formation of the by-pass and trapping channels. Using these modifications, we have successfully trapped different types of sample in one trapping site, and constructed an array of paired beads of different type such as polystyrene beads or hydrogel beads made of agarose, collagen or alginate. We found that this meander-shaped dynamic microfluidic technology is applicable for the observation of interactions between the paired beads such as molecular diffusion.

Quantitative cell-based reporter gene assays using droplet-based microfluidics

We used a droplet-based microfluidic system to perform a quantitative cell-based reporter gene assay for a nuclear receptor ligand. Single Bombyx mori cells are compartmentalized in nanoliter droplets which function as microreactors with a >1000-fold smaller volume than a microtiter-plate well, together with eight or ten discrete concentrations of 20-hydroxyecdysone, generated by on-chip dilution over 3 decades and encoded by a fluorescent label. The simultaneous measurement of the expression of green fluorescent protein by the reporter gene and of the fluorescent label allows construction of the dose-response profile of the hormone at the single-cell level. Screening approximately 7500 cells per concentration provides statistically relevant data that allow precise measurement of the EC(50) (70 nM +/- 12%, alpha = 0.05), in agreement with standard methods as well as with literature data.

Nanoheterogeneous multilayer films with perfluorinated domains fabricated using the layer-by-layer method

Nanoheterogenous ultrathin films containing perfluorinated domains were prepared via the layer-by-layer (LbL) electrostatic self-assembly method. The films are constructed from the amphiphilic cationic copolymer with perfluorinated side chains and poly(sodium styrenesulfonate) (PSS). The LbL process was optimized by the application of sonication which allowed linear growth of the film. The resulting film exhibited micellar structure with isolated fluorocarbon hydrophobic domains. The remarkable features of the films were their switchable wettability and friction properties. The obtained water-processable films can find a number of potential applications, e.g., as smart and low friction coatings.

Microfluidic systems for biosensing

In the past two decades, Micro Fluidic Systems (MFS) have emerged as a powerful tool for biosensing, particularly in enriching and purifying molecules and cells in biological samples. Compared with conventional sensing techniques, distinctive advantages of using MFS for biomedicine include ultra-high sensitivity, higher throughput, in-situ monitoring and lower cost. This review aims to summarize the recent advancements in two major types of micro fluidic systems, continuous and discrete MFS, as well as their biomedical applications. The state-of-the-art of active and passive mechanisms of fluid manipulation for mixing, separation, purification and concentration will also be elaborated. Future trends of using MFS in detection at molecular or cellular level, especially in stem cell therapy, tissue engineering and regenerative medicine, are also prospected.

2-layer based microfluidic concentration generator by hybrid serial and volumetric dilutions

We present a 2-layer based microfluidic concentration generator by a hybrid of a serial and a volumetric dilution for dose-response experiments in drug screening. The hybrid dilution method using 2-layer based microfluidic network significantly reduces the total number of cascaded serial dilution stages. The proposed strategy is capable of generating a large number of universal stepwise monotonic concentrations with a wide range of logarithmic and linear scales. We have studied an equivalent electrical circuit to that of the 2-layer based microfluidic network, where the only variable parameter is channel length. We have designed a microfluidic dilution generator simultaneously covering 14 doses with a combination of 4-order logarithmic and 4-point linear concentrations. The design has been verified by a commercial circuit analysis software (e.g., P-Spice) for the electrical circuit analysis and a computational fluid dynamics software (e.g., CFD-ACE+) for the microfluidic circuit analysis. As a real-life application of the proposed dilution generator, we have successfully performed a dose-response experiment using MCF-7 human breast cancer cells. We expect that the proposed dilution method will be useful to study not only high throughput drug screening but also optimization in biology, chemistry, medicine, and material sciences.

Bio-electrospraying and droplet-based microfluidics: control of cell numbers within living residues

Bio-electrospraying (BES) has demonstrated great promise as a rapidly evolving strategy for tissue engineering and regenerative biology/medicine. Since its discovery in 2005, many studies have confirmed that cells (immortalized, primary and stem cells) and whole organisms (Danio rerio, Xenopus tropicalis, Caenorhabditis elegans to Drosophila) remain viable post-bio-electrospraying. Although this bio-protocol has achieved much, it suffers from one crucial problem, namely the ability to precisely control the number of cells within droplets and or encapsulations. If overcome, BES has the potential to become a high-efficiency biotechnique for controlled cell encapsulation, a technique most useful for a wide range of applications in biology and medicine ranging from the forming of three-dimensional cultures to an approach for treating diseases such as type I diabetes. In this communication, we address this issue by demonstrating the coupling of BES with droplet-based microfluidics for controlling live cell numbers within droplets and residues.

Ultrahigh-throughput FACS-based screening for directed enzyme evolution

Directed enzyme evolution has proven to be a powerful tool for improving a range of properties of enzymes through consecutive rounds of diversification and selection. However, its success depends heavily on the efficiency of the screening strategy employed. Fluorescence-activated cell sorting (FACS) has recently emerged as a powerful tool for screening enzyme libraries due to its high sensitivity and its ability to analyze as many as 10(8) mutants per day. Applications of FACS screening have allowed the isolation of enzyme variants with significantly improved activities, altered substrate specificities, or even novel functions. This review discusses FACS-based screening for enzymatic activity and its potential application for the directed evolution of enzymes, ribozymes, and catalytic antibodies.

Synthesis at the interface of chemistry and biology

As the focus of synthesis increasingly shifts from its historical emphasis on molecular structure to function, improved strategies are clearly required for the generation of molecules with defined physical, chemical, and biological properties. In contrast, living organisms are remarkably adept at producing molecules and molecular assemblies with an impressive array of functions - from enzymes and antibodies to the photosynthetic center. Thus, the marriage of Nature's synthetic strategies, molecules, and biosynthetic machinery with more traditional synthetic approaches might enable the generation of molecules with properties difficult to achieve by chemical strategies alone. Here we illustrate the potential of this approach and overview some opportunities and challenges in the coming years.

Micro-Particle Image Velocimetry (microPIV): recent developments, applications, and guidelines

In this review we discuss the state of the art of the optical whole-field velocity measurement technique micro-scale Particle Image Velocimetry (microPIV). microPIV is a useful tool for fundamental research of microfluidics as well as for the detailed characterization and optimization of microfluidic applications in life science, lab-on-a-chip, biomedical research, micro chemical engineering, analytical chemistry and other related fields of research. An in depth description of the microPIV method is presented and compared to other flow visualization and measurement methods. An overview of the most relevant applications is given on the topics of near-wall flow, electrokinetic flow, biological flow, mixing, two-phase flow, turbulence transition and complex fluid dynamic problems. Current trends and applications are critically reviewed. Guidelines for the implementation and application are also discussed.