Drug release from nanoparticles embedded in four different nanofibrillar cellulose aerogels

Mesh size analysis of cellulose nanofibril hydrogels using solute exclusion and PFG-NMR spectroscopy

The pore structure of TEMPO-mediated oxidized CNF hydrogels, chemically cross-linked with water-soluble diamines, is studied. A solute exclusion method and pulsed-field-gradient NMR are used to estimate the mesh size distribution in the gel network in its hydrated state. Dextran fractions with the nominal molecular weights in the range of 10-2000 kDa are used as probes. The results show a nonuniform network structure, consisting of a group of large openings that contain ∼50% of water, and regions with a more compact structure and smaller mesh units that restrict the diffusivity of the dextran molecules. A biexponential model is proposed for the NMR echo amplitude decay due to the probe diffusion into the gel network. A typical single exponential model does not fit the experimental data when the probe molecular size is comparable to the network mesh size. The results obtained with NMR, using the proposed biexponential model, are in very good agreement with those determined with solute exclusion. Precise mesh size estimation with solute exclusion using pore models is subject to restrictions, and vary with the assumed pore geometry. The average mesh size obtained using a spherical pore model, ∼35 nm, in the compact regions of the hydrogel, is in good agreement with the theoretical value in a network of rodlike particles. Neglecting the wall effects leads to underestimation of the mesh size with both techniques.

Understanding Critical Quality Attributes for Nanocrystals from Preparation to Delivery

Poor solubility of active pharmaceutical ingredients (APIs) is a great challenge for the pharmaceutical industry and, hence, drug nanocrystals are widely studied as one solution to overcome these solubility problems. Drug nanocrystals have comparatively simple structures which make them attractive for the formulation for poorly soluble drugs, and their capability to improve the dissolution in vitro is easily demonstrated, but turning the in vitro superior properties of nanocrystals to success in vivo, is often demanding: controlled (including enhanced) drug dissolution followed by successful permeation is not guaranteed, if for example, the dissolved drug precipitates before it is absorbed. In this review critical quality attributes related to nanocrystal formulations from production to final product performance in vivo are considered. Many important parameters exist, but here physical stability (aggregation tendency and solid state form), solubility properties influencing dissolution and supersaturation, excipient use to promote the maintenance of supersaturation, and finally the fate of nanocrystals in vivo are the main subjects of our focus.

Cellulose nanocrystals: synthesis, functional properties, and applications

Cellulose nanocrystals are unique nanomaterials derived from the most abundant and almost inexhaustible natural polymer, cellulose. These nanomaterials have received significant interest due to their mechanical, optical, chemical, and rheological properties. Cellulose nanocrystals primarily obtained from naturally occurring cellulose fibers are biodegradable and renewable in nature and hence they serve as a sustainable and environmentally friendly material for most applications. These nanocrystals are basically hydrophilic in nature; however, they can be surface functionalized to meet various challenging requirements, such as the development of high-performance nanocomposites, using hydrophobic polymer matrices. Considering the ever-increasing interdisciplinary research being carried out on cellulose nanocrystals, this review aims to collate the knowledge available about the sources, chemical structure, and physical and chemical isolation procedures, as well as describes the mechanical, optical, and rheological properties, of cellulose nanocrystals. Innovative applications in diverse fields such as biomedical engineering, material sciences, electronics, catalysis, etc, wherein these cellulose nanocrystals can be used, are highlighted.

Antibacterial paperboard packaging using microfibrillated cellulose

The industry and consumers are focusing more and more on the development of biodegradable and lightweight food-packaging materials, which could better preserve the quality of the food and improve its shelf-life. In an attempt to meet these requirements, this study presents a novel bio-substrate able to contain active bio-molecules for future food-packaging applications. Based on a paperboard substrate, the development of an antibacterial bio-packaging material is, therein, achieved using a chlorhexidine digluconate (CHX) solution as a model of an antibacterial molecule, mixed with microfibrillated cellulose (MFC) and used as coating onto paperboard samples. AFM and FE-SEM analyses were performed to underline the nanoporous MFC network able to trap and to progressively release the CHX molecules. The release study of CHX was conducted in an aqueous medium and showed a lower proportion (20 %) of CHX released when using MFC. This led to the constant release of low amounts of CHX over 40 h. Antibacterial tests were carried out to assess the preservation of the antibacterial activity of the samples after the release studies. Samples remained active against Bacillus subtilis, with better results being obtained when MFC was used. The preservation of the quality of a model food was finally evaluated paving the way for future promising applications in the food packaging industry.

Polysaccharide nanoparticles for protein and Peptide delivery: exploring less-known materials

Finding adequate carriers for protein and peptide delivery has become an urgent need, owing to the growing number of macromolecules identified as having therapeutic potential. Nanoparticles have emerged in the field as very promising vehicles and much work has been directed to testing the capacity of different materials to compose the matrix of these carriers. Natural materials and, specifically, polysaccharides have been taking the forefront of the challenge, because of several favoring properties that include the higher propensity to exhibit biodegradability and biocompatibility, and also the high structural flexibility. The majority of works found in the literature regarding polysaccharide nanoparticles uses very popular materials like chitosan or hyaluronic acid. This review is aimed at describing and exploring the potential of polysaccharides that are not so well known or that are less explored. For those, the main properties will be described, together with an overview of the reported applications as nanoparticle matrix materials.

Preparation and application of micro/nanoparticles based on natural polysaccharides

Polysaccharides have attracted more and more attentions and been recognized to be the most promising materials in recent years because of their outstanding merits such as easily available, non-toxic, biocompatible, biodegradable, and easily modified. Considerable research efforts have been directed toward developing polysaccharides-based micro/nanoparticles (PM/NPs). The new major studies of PM/NPs over the past few years are outlined in this review. Methods of preparation, including self-assembly, ionic-gelation, complex coacervation, emulsification, and desolvation method and some others, are summarized. Different applications of PM/NPs in the field of drug-delivery system are highlighted. Besides, another novel application of PM/NPs that are used as emulsifiers to stabilize Pickering emulsion is also introduced. These environmental-friendly particle emulsifiers have received reasonable attention due to their novel applications, especially in food, cosmetics, and pharmaceutics. From literature surveys, we realized that studies on PM/NP systems for different applications have increased rapidly. Hence, the present review is timely.

Applications of hydrophobins: current state and perspectives

Hydrophobins are proteins exclusively produced by filamentous fungi. They self-assemble at hydrophilic-hydrophobic interfaces into an amphipathic film. This protein film renders hydrophobic surfaces of gas bubbles, liquids, or solid materials wettable, while hydrophilic surfaces can be turned hydrophobic. These properties, among others, make hydrophobins of interest for medical and technical applications. For instance, hydrophobins can be used to disperse hydrophobic materials; to stabilize foam in food products; and to immobilize enzymes, peptides, antibodies, cells, and anorganic molecules on surfaces. At the same time, they may be used to prevent binding of molecules. Furthermore, hydrophobins have therapeutic value as immunomodulators and can been used to produce recombinant proteins.

Controlled release of folic acid through liquid-crystalline folate nanoparticles

The present study explores folate nanoparticles as nano-carriers for controlled drug delivery. Cross-linked nanoparticles of liquid crystalline folates are composed of ordered stacks. This paper shows that the folate nanoparticles can be made with less than 5% loss in folate ions. In addition, this study shows that folate nanoparticles can disintegrate in a controlled fashion resulting in controlled release of the folate ions. Release can be controlled by the size of nanoparticles, the extent of cross-linking and the choice of cross-linking cation. The effect of different factors like agitation, pH, and temperature on folate release was also studied. Studies were also carried out to show the effect of release medium and role of ions in the release medium on disruption of folate assembly.

Comparative release studies of two cationic model drugs from different cellulose nanocrystal derivatives

Native cellulose nanocrystal (CNC), oxidized CNC (CNC-OX) and chitosan oligosaccharide grafted CNC (CNC-CSOS) were evaluated as potential drug delivery carriers for two model drug compounds, procaine hydrochloride (PrHy) and imipramine hydrochloride (IMI). The loading of PrHy and IMI was performed at pH 8 and 7, respectively. IMI displayed higher binding to CNC derivatives than PrHy. Drug selective membranes were prepared for each model drug and a drug selective electrode system was used to measure the drug concentration in the filtrate and release medium. Isothermal Titration Calorimetry (ITC) was used to elucidate the types of interactions between model drugs and CNC and its derivatives. The complexation between model drugs and CNC derivatives was confirmed by zeta potential and transmittance measurements. The binding and release of these drugs correlated with the nature and types of interactions that exist between the CNC and drug molecules.

A review of bacterial cellulose-based drug delivery systems: their biochemistry, current approaches and future prospects

Objectives

The field of pharmaceutical technology is expanding rapidly because of the increasing number of drug delivery options. Successful drug delivery is influenced by multiple factors, one of which is the appropriate identification of materials for research and engineering of new drug delivery systems. Bacterial cellulose (BC) is one such biopolymer that fulfils the criteria for consideration as a drug delivery material.

Key findings

BC showed versatility in terms of its potential for in-situ modulation, chemical modification after synthesis and application in the biomedical field, thus expanding the current, more limited view of BC and facilitating the investigation of its potential for application in drug delivery.

Summary

Cellulose, which is widely available in nature, has numerous applications. One of the applications is that of BC in the pharmaceutical and biomedical fields, where it has been primarily applied for transdermal formulations to improve clinical outcomes. This review takes a multidisciplinary approach to consideration of the feasibility and potential benefits of BC in the development of other drug delivery systems for various routes of administration.

Production of biocompatible and antimicrobial bacterial cellulose polymers functionalized by RGDC grafting groups and gentamicin

Bacterial cellulose (BC), a three-dimensional fibril, is a natural polymer that can be used for many applications. BC effectiveness may be improved by enhancing surface characteristics contributing to a better physiologic interaction with human and animal cells and to intrinsically present antimicrobial agents. In the present study, gentamicin-activated BC membranes were obtained by chemically grafting RGDC peptides (R: arginine; G: glycine; D: aspartic acid; C: cysteine) using coupling agent 3-aminopropyltriethoxysilane (APTES) followed by covalent attachment of gentamicin onto the surface of the BC membrane network. X-ray photoelectron spectroscopy (XPS) analyses showed that the BC-APTES contained 0.7% of silicon in terms of elemental composition, corresponding to a grafting ratio of 1:12. The presence of silicon and nitrogen in the BC-APTES confirmed the surface functionalization of the BC membrane. Fourier-transform infrared (FTIR) analyses show the formation of the secondary amide as supported by the valence bond C═O (ν(C═O)), a characteristic vibrational transition at 1650 cm(-1) which is particularly intense with the BC-RGDC-gentamicin membrane. Energy-dispersive X-ray (EDX) analyses showed a low level of carbon and nitrogen (C + N) in pure BC but a high level of (C + N) in BC-RGDC-gentamicin confirming the surface modification of the BC membrane by RGDC and gentamicin enrichment. Of great interest, the gentamicin-RGDC-grafted BC membranes are bactericidal against Streptococcus mutans but nontoxic to human dermal fibroblasts and thus may be useful for multiple applications such as improved wound healing and drug delivery systems.

Aspirin degradation in surface-charged TEMPO-oxidized mesoporous crystalline nanocellulose

TEMPO-mediated surface oxidation of mesoporous highly crystalline Cladophora cellulose was used to introduce negative surface charges onto cellulose nanofibrils without significantly altering other structural characteristics. This enabled the investigation of the influence of mesoporous nanocellulose surface charges on aspirin chemical stability to be conducted. The negative surface charges (carboxylate content 0.44±0.01 mmol/g) introduced on the mesoporous crystalline nanocellulose significantly accelerated aspirin degradation, compared to the starting material which had significantly less surface charge (0.06±0.01 mmol/g). This effect followed from an increased aspirin amorphisation ability in mesopores of the oxidized nanocellulose. These results highlight the importance of surface charges in formulating nanocellulose for drug delivery.