Molecular pathways mediating mechanical signaling in bone

Sclerostin antibody and interval treadmill training effects in a rodent model of glucocorticoid-induced osteopenia

Glucocorticoids have a beneficial anti-inflammatory and immunosuppressive effect, but their use is associated with decreased bone formation, bone mass and bone quality, resulting in an elevated fracture risk. Exercise and sclerostin antibody (Scl-Ab) administration have both been shown to increase bone formation and bone mass, therefore the ability of these treatments to inhibit glucocorticoid-induced osteopenia alone or in combination were assessed in a rodent model. Adult (4 months-old) male Wistar rats were allocated to a control group (C) or one of 4 groups injected subcutaneously with methylprednisolone (5mg/kg/day, 5 days/week). Methylprednisolone treated rats were injected subcutaneously 2 days/week with vehicle (M) or Scl-Ab-VI (M+S: 25mg/kg/day) and were submitted or not to treadmill interval training exercise (1h/day, 5 days/week) for 9 weeks (M+E, M+E+S). Methylprednisolone treatment increased % fat mass and % apoptotic osteocytes, reduced whole body and femoral bone mineral content (BMC), reduced femoral bone mineral density (BMD) and osteocyte lacunae occupancy. This effect was associated with lower trabecular bone volume (BV/TV) at the distal femur. Exercise increased BV/TV, osteocyte lacunae occupancy, while reducing fat mass, the bone resorption marker NTx, and osteocyte apoptosis. Exercise did not affect BMC or cortical microarchitectural parameters. Scl-Ab increased the bone formation marker osteocalcin and prevented the deleterious effects of M on bone mass, further increasing BMC, BMD and BV/TV to levels above the C group. Scl-Ab increased femoral cortical bone parameters at distal part and midshaft. Scl-Ab prevented the decrease in osteocyte lacunae occupancy and the increase in osteocyte apoptosis induced by M. The addition of exercise to Scl-Ab treatment did not result in additional improvements in bone mass or bone strength parameters. These data suggest that although our exercise regimen did prevent some of the bone deleterious effects of glucocorticoid treatment, particularly in trabecular bone volume and osteocyte apoptosis, Scl-Ab treatment resulted in marked improvements in bone mass across the skeleton and in osteocyte viability, resulting in decreased bone fragility.

Conditioned media from hypoxic-cultured human dental pulp cells promotes bone healing during distraction osteogenesis

Distraction osteogenesis (DO) is a surgical procedure used to correct various skeletal disorders. Improving the technique by reducing the healing time would be of clinical relevance. The aim of this study was to determine the angiogenic and regenerative potential of conditioned media (CMs) collected from human dental pulp cells (hDPCs) grown under different culture conditions. CM collected from cells under hypoxia was used to improve bone healing and the DO procedure in vivo. The angiogenic potentials of CMs collected from hDPCs grown under normoxic (−Nor) and hypoxic (−Hyp) conditions were evaluated by quantitative PCR (VEGF‐A, angiopoietin‐1, angiopoietin‐2, interleukin‐6 (IL‐6) and CXCL12), ELISA assays (VEGF‐A, Ang‐2), tube‐formation and wound‐healing assays, using human umbilical vein endothelial cells. The results demonstrated that hypoxic CM had significantly higher angiogenic potential than normoxic CM. Human fetal osteoblasts (hFOBs) were exposed to CM, followed by alizarin red staining, to assess the osteogenic potential. It was found that CM did not enhance the mineralization capacity of hFOBs. DO was performed in the tibiae of 30 mice, followed by a local injection of 20 µl CM (CM–Nor and CM–Hyp groups) or serum‐free DMEM (control group) into the distraction zone every second day. The mice were sacrificed at days 13 and 27. The CM–Hyp treatment revealed a higher X‐ray density than the control group (p < 0.05). Our study suggests that the angiogenic effect promoted by hypoxic culture conditions is dependent on VEGF‐A and Ang‐2 released from hDPCs. Furthermore, CM–Hyp treatment may thus improve the DO procedure, accelerating bone healing. © 2015 The Authors. Journal of Tissue Engineering and Regenerative Medicine published by John Wiley & Sons, Ltd.

Modulation of unloading-induced bone loss in mice with altered ERK signaling

Genetic variations mediate skeletal responsiveness to mechanical unloading, with individual space travelers exhibiting large variations in the extent of bone loss. We previously identified genomic regions harboring several hundred genes that can modulate the magnitude of skeletal adaptation to mechanical unloading. Here, bioinformatic filters aided in shortlisting 30 genes with bone-related and mechanoregulatory roles. The genes CD44, FGF2, NOD2, and Fas, all associated with ERK signaling, were then functionally tested in hindlimb-unloaded (HLU) knockout (KO) mice. Compared to their respective normally ambulating wildtype (WT) controls, all KO strains, except Fas mice, had lower trabecular bone volume, bone volume fraction, and/or trabecular number. For cortical bone and compared to ambulatory WT mice, CD44(-/-) had impaired properties while FGF2(-/-) showed enhanced indices. NOD2(-/-) and Fas(-/-) did not have a cortical phenotype. In all KO and WT groups, HLU resulted in impaired trabecular and cortical indices, primarily due to trabecular tissue loss and mitigation of cortical bone growth. The difference in trabecular separation between HLU and ambulatory controls was significantly greater in CD44(-/-) and NOD2(-/-) mice than in WT mice. In cortical bone, differences in cortical thickness, total pore volume, and cortical porosity between HLU and controls were aggravated in CD44(-/-) mice. In contrast, deletion of NOD2 and Fas genes mitigated the differences in Po.V between HLU and control mice. Together, we narrowed a previous list of QTL-derived candidate genes from over 300 to 30, and showed that CD44, NOD2, and Fas have distinct functions in regulating changes in trabecular and cortical bone indices during unloading.

Connexin 43 and ERK regulate tension-induced signal transduction in human periodontal ligament fibroblasts

Periodontal ligament (PDL) fibroblasts play an important role in preserving periodontal homeostasis and transmitting mechanical signals to alveolar bone. Connexin 43 (Cx43), a gap junction protein, is essential for bone homeostasis and regulates bone remodeling. However, the function of Cx43 in human PDL fibroblast-regulated bone remodeling has not yet been elucidated. In this study, human PDL fibroblasts were exposed to cyclic mechanical tension with a maximum 5% elongation for different durations. We then examined the expression of signaling molecules related to osteogenesis and osteoclastogenesis at both the mRNA and protein levels as well as the activity of extracellular signal-regulated kinase (ERK) in human PDL fibroblasts after loading. We found that mechanical tension increased Cx43, which further upregulated osteogenic (e.g., RUNX2, Osterix, and OPG) and down-regulated osteoclastogenic (e.g., RANKL) signaling molecules. Suppressing Cx43 gene (Gja1) by siRNA inhibited the increase in osteogenesis-related molecules but enhanced RANKL expression. Similar to Cx43, activated ERK1/2 was also enhanced by mechanical tension and suppressed by Cx43 siRNA. Inhibition of ERK1/2 signaling using PD98059 reduced the tension-regulated increase in osteogenesis-related molecules but enhanced that of osteoclastogenesis-related ones. These findings suggest that cyclic tension may involve into the osteogenic or osteoclastogenetic differentiation potential of human PDL fibroblasts via the Cx43-ERK1/2 signaling pathway.

In vivo mechanical loading rapidly activates β-catenin signaling in osteocytes through a prostaglandin mediated mechanism

The response of the skeleton to loading appears to be mediated through the activation of the Wnt/β-catenin signaling pathway and osteocytes have long been postulated to be the primary mechanosensory cells in bone. To examine the kinetics of the mechanoresponse of bone and cell types involved in vivo, we performed forearm loading of 17-week-old female TOPGAL mice. β-catenin signaling was observed only in embedded osteocytes, not osteoblasts, at 1h post-loading, spreading to additional osteocytes and finally to cells on the bone surface by 24h. This early activation at 1h appeared to be independent of receptor (Lrp5/6) mediated activation as it occurred in the presence of the inhibitors sclerostin and/or Dkk1. The COX-2 inhibitor, Carprofen, blocked the activation of β-catenin signaling and decline in sclerostin positive osteocytes post-loading implying an important role for prostaglandin. In vitro, PI3K/Akt activation was shown to be required for β-catenin nuclear translocation downstream from prostaglandin in MLO-Y4 osteocyte-like cells supporting this mechanism. Downstream targets of β-catenin signaling, sclerostin and Dkk1, were also examined and found to be significantly downregulated in osteocytes in vivo at 24h post-loading. The pattern of initially activated osteocytes appeared random and in order to understand this heterogeneous expression, a novel finite element model of the strain field in the ulna was developed, which predicts highly variable local magnitudes of strain experienced by osteocytes. In summary, both in vivo and in vitro models show the rapid activation of β-catenin in response to load through the early release of prostaglandin and that strain fields in the bone are extremely heterogeneous resulting in heterogeneous activation of the β-catenin pathway in osteocytes in vivo.

Physiological mechanisms and therapeutic potential of bone mechanosensing

Skeletal loading is an important physiological regulator of bone mass. Theoretically, mechanical forces or administration of drugs that activate bone mechanosensors would be a novel treatment for osteoporotic disorders, particularly age-related osteoporosis and other bone loss caused by skeletal unloading. Uncertainty regarding the identity of the molecular targets that sense and transduce mechanical forces in bone, however, has limited the therapeutic exploitation of mechanosesning pathways to control bone mass. Recently, two evolutionally conserved mechanosensing pathways have been shown to function as "physical environment" sensors in cells of the osteoblasts lineage. Indeed, polycystin-1 (Pkd1, or PC1) and polycystin-2 (Pkd2, or PC2' or TRPP2), which form a flow sensing receptor channel complex, and TAZ (transcriptional coactivator with PDZ-binding motif, or WWTR1), which responds to the extracellular matrix microenvironment act in concert to reciprocally regulate osteoblastogenesis and adipogenesis through co-activating Runx2 and a co-repressing PPARγ activities. Interactions of polycystins and TAZ with other putative mechanosensing mechanism, such as primary cilia, integrins and hemichannels, may create multifaceted mechanosensing networks in bone. Moreover, modulation of polycystins and TAZ interactions identify novel molecular targets to develop small molecules that mimic the effects of mechanical loading on bone.

Inhibition of T-Type Voltage Sensitive Calcium Channel Reduces Load-Induced OA in Mice and Suppresses the Catabolic Effect of Bone Mechanical Stress on Chondrocytes

Voltage-sensitive calcium channels (VSCC) regulate cellular calcium influx, one of the earliest responses to mechanical stimulation in osteoblasts. Here, we postulate that T-type VSCCs play an essential role in bone mechanical response to load and participate in events leading to the pathology of load-induced OA. Repetitive mechanical insult was used to induce OA in Ca_v3.2 T-VSCC null and wild-type control mouse knees. Osteoblasts (MC3T3-E1) and chondrocytes were treated with a selective T-VSCC inhibitor and subjected to fluid shear stress to determine how blocking of T-VSCCs alters the expression profile of each cell type upon mechanical stimulation. Conditioned-media (CM) obtained from static and sheared MC3T3-E1 was used to assess the effect of osteoblast-derived factors on the chondrocyte phenotype. T-VSCC null knees exhibited significantly lower focal articular cartilage damage than age-matched controls. In vitro inhibition of T-VSCC significantly reduced the expression of both early and late mechanoresponsive genes in osteoblasts but had no effect on gene expression in chondrocytes. Furthermore, treatment of chondrocytes with CM obtained from sheared osteoblasts induced expression of markers of hypertrophy in chondrocytes and this was nearly abolished when osteoblasts were pre-treated with the T-VSCC-specific inhibitor. These results indicate that T-VSCC plays a role in signaling events associated with induction of OA and is essential to the release of osteoblast-derived factors that promote an early OA phenotype in chondrocytes. Further, these findings suggest that local inhibition of T-VSCC may serve as a therapy for blocking load-induced bone formation that results in cartilage degeneration.

A comparative study of mechanical strain, icariin and combination stimulations on improving osteoinductive potential via NF-kappaB activation in osteoblast-like cells

Background

The combination of drugs and exercise was the effective treatment in bone injure and rebuilding in clinic. As mechanical strain has potential in inducing the differentiation of osteoblasts in our previous study, the further research to investigate the combination of mechanical strain and icariin stimulation on inducing osteoblast proliferation, differentiation and the possible mechanism in MC3T3-E1 cell line.

Methods

A whole cell enzyme-linked immunosorbent assay that detects the bromodeoxyuridine incorporation during DNA synthesis was applied to evaluate the proliferation. The mRNA expression of alkaline phosphatase (ALP), osteocalcin (OCN), type I collagen (Col I), bone morphogenetic protein-2 (BMP-2) and BMP-4 was detected by real-time reverse-transcription polymerase chain reaction. The activity of ALP was analyzed by ELISA and the protein expression of OCN, Col I and BMP-2 was assessed by western blot. Moreover, the activity of nuclear transcription factor kappa-B (NF-κB) signaling pathway was investigated with the expression of inhibitor of κB (IκB) α, phosphorylation of IκB-α (P-IκB-α), p65, P-p65 by western blot.

Results

We observed that compared to single mechanical strain or icariin stimulation, the mRNA and protein expressions of ALP (P < 0.05 or P < 0.01), OCN (P < 0.01) and Col I (P < 0.05 or P < 0.01) were increased significantly by the combination of mechanical strain and icariin stimulation. Moreover, the combination of mechanical strain and icariin stimulation could up-regulate the expression of BMP-2 (P < 0.01) and BMP-4 compared to single mechanical strain or icariin stimulation. The combination of mechanical strain and icariin stimulation could activate NF-κB signaling pathway by increasing the expression of IκB α, P-IκB-α, p65, P-p65 (P < 0.01).

Conclusion

The combination of mechanical strain and icariin stimulation could activate the NF-κB pathway to improve the proliferation, differentiation of osteoblast-like cells.

Vibration stimuli and the differentiation of musculoskeletal progenitor cells: Review of results in vitro and in vivo

Due to the increasing burden on healthcare budgets of musculoskeletal system disease and injury, there is a growing need for safe, effective and simple therapies. Conditions such as osteoporosis severely impact on quality of life and result in hundreds of hours of hospital time and resources. There is growing interest in the use of low magnitude, high frequency vibration (LMHFV) to improve bone structure and muscle performance in a variety of different patient groups. The technique has shown promise in a number of different diseases, but is poorly understood in terms of the mechanism of action. Scientific papers concerning both the in vivo and in vitro use of LMHFV are growing fast, but they cover a wide range of study types, outcomes measured and regimens tested. This paper aims to provide an overview of some effects of LMHFV found during in vivo studies. Furthermore we will review research concerning the effects of vibration on the cellular responses, in particular for cells within the musculoskeletal system. This includes both osteogenesis and adipogenesis, as well as the interaction between MSCs and other cell types within bone tissue.

MiR-494-3p induced by compressive force inhibits cell proliferation in MC3T3-E1 cells

Mechanical stimuli regulate fundamental cell processes such as proliferation, differentiation, and morphogenesis. We attempted to identify microRNA (miRNA) whose expression is changed during compressive treatment in MC3T3-E1, a pre-osteoblastic cell line. Microarray analysis followed by reverse transcription-quantitative polymerase chain reaction revealed that compressive force at 294 Pa for 24 h in MC3T3-E1 cells increased levels of miR-494-3p, miR-146a-5p, miR-210-3p, and miR-1247-3p. Among these miRNAs, miR-494-3p was found to inhibit cell proliferation in MC3T3-E1 cells. Furthermore, cells subjected to compressive force showed slower cell growth compared with control cells. Levels of mRNA for fibroblast growth factor receptor 2 (FGFR2) and Rho-associated coiled-coil kinase 1 (ROCK1), which were predicted to be targets of miR-494-3p, were decreased by compressive force or overexpression of miR-494-3p mimics in MC3T3-E1 cells. Furthermore, binding sites of miR-494-3p within 3'-untranslated regions of Fgfr2 and Rock1 were determined using luciferase reporter assay. In conclusion, compressive force affected expressions of several miRNAs including miR-494-3p in MC3T3-E1 cells. Compressive force might inhibit cell proliferation in osteoblasts by up-regulating miR-494-3p followed by FGFR2 and ROCK1 gene repressions.

Three-dimensional cell culture: a breakthrough in vivo

Cell culture is an important tool for biological research. Two-dimensional cell culture has been used for some time now, but growing cells in flat layers on plastic surfaces does not accurately model the in vivo state. As compared to the two-dimensional case, the three-dimensional (3D) cell culture allows biological cells to grow or interact with their surroundings in all three dimensions thanks to an artificial environment. Cells grown in a 3D model have proven to be more physiologically relevant and showed improvements in several studies of biological mechanisms like: cell number monitoring, viability, morphology, proliferation, differentiation, response to stimuli, migration and invasion of tumor cells into surrounding tissues, angiogenesis stimulation and immune system evasion, drug metabolism, gene expression and protein synthesis, general cell function and in vivo relevance. 3D culture models succeed thanks to technological advances, including materials science, cell biology and bioreactor design.

Interaction between bone and muscle in older persons with mobility limitations

Aging is associated with a progressive loss of bone-muscle mass and strength. When the decline in mass and strength reaches critical thresholds associated with adverse health outcomes, they are operationally considered geriatric conditions and named, respectively, osteoporosis and sarcopenia. Osteoporosis and sarcopenia share many of the same risk factors and both directly or indirectly cause higher risk of mobility limitations, falls, fractures and disability in activities of daily living. This is not surprising since bones adapt their morphology and strength to the long-term loads exerted by muscle during anti-gravitational and physical activities. Non-mechanical systemic and local factors also modulate the mechanostat effect of muscle on bone by affecting the bidirectional osteocyte-muscle crosstalk, but the specific pathways that regulate these homeostatic mechanisms are not fully understood. More research is required to reach a consensus on cut points in bone and muscle parameters that identify individuals at high risk for adverse health outcomes, including falls, fractures and disability. A better understanding of the muscle-bone physiological interaction may help to develop preventive strategies that reduce the burden of musculoskeletal diseases, the consequent disability in older persons and to limit the financial burden associated with such conditions. In this review, we summarize age-related bone-muscle changes focusing on the biomechanical and homeostatic mechanisms that explain bone-muscle interaction and we speculate about possible pathological events that occur when these mechanisms become impaired. We also report some recent definitions of osteoporosis and sarcopenia that have emerged in the literature and their implications in clinical practice. Finally, we outline the current evidence for the efficacy of available anti-osteoporotic and proposed antisarcopenic interventions in older persons.

Strain energy density gradients in bone marrow predict osteoblast and osteoclast activity: a finite element study

Huiskes et al. hypothesized that mechanical strains sensed by osteocytes residing in trabecular bone dictate the magnitude of load-induced bone formation. More recently, the mechanical environment in bone marrow has also been implicated in bone׳s response to mechanical stimulation. In this study, we hypothesize that trabecular load-induced bone formation can be predicted by mechanical signals derived from an integrative µFE model, incorporating a description of both the bone and marrow phase. Using the mouse tail loading model in combination with in vivo micro-computed tomography (µCT) we tracked load induced changes in the sixth caudal vertebrae of C57BL/6 mice to quantify the amount of newly mineralized and eroded bone volumes. To identify the mechanical signals responsible for adaptation, local morphometric changes were compared to micro-finite element (µFE) models of vertebrae prior to loading. The mechanical parameters calculated were strain energy density (SED) on trabeculae at bone forming and resorbing surfaces, SED in the marrow at the boundary between bone forming and resorbing surfaces, along with SED in the trabecular bone and marrow volumes. The gradients of each parameter were also calculated. Simple regression analysis showed mean SED gradients in the trabecular bone matrix to significantly correlate with newly mineralized and eroded bone volumes R(2)=0.57 and 0.41, respectively, p<0.001). Nevertheless, SED gradients in the marrow were shown to be the best predictor of osteoblastic and osteoclastic activity (R(2)=0.83 and 0.60, respectively, p<0.001). These data suggest that the mechanical environment of the bone marrow plays a significant role in determining osteoblast and osteoclast activity.

Primary cilia exist in a small fraction of cells in trabecular bone and marrow

Primary cilia are potent mechanical and chemical sensory organelles in cells of bone lineage in tissue culture. Cell culture experiments suggest that primary cilia sense fluid flow and this stimulus is translated through biochemical signaling into an osteogenic response in bone cells. Moreover, in vivo, primary cilia knockout in bone cells attenuates bone formation in response to loading. However, understanding the role of the primary cilium in bone mechanotransduction requires knowledge of its incidence and location in vivo. We used immunohistochemistry to quantify the number of cells with primary cilia within the trabecular bone tissue and the enclosed marrow of ovine cervical vertebrae. Primary cilia were identified in osteocytes, bone lining cells, and in cells within the marrow, but were present in only a small fraction of cells. Approximately 4% of osteocytes and 4.6% of bone lining cells expressed primary cilia. Within the marrow space, only approximately 1% of cells presented primary cilia. The low incidence of primary cilia may indicate that cilia either function as mechanosensors in a selected number of cells, function in concert with other mechanosensing mechanisms, or that the role of primary cilia in mechanosensing is secondary to its role in chemosensing or cellular attachment.

Biomechanical forces in the skeleton and their relevance to bone metastasis: biology and engineering considerations

Bone metastasis represents the leading cause of breast cancer related-deaths. However, the effect of skeleton-associated biomechanical signals on the initiation, progression, and therapy response of breast cancer bone metastasis is largely unknown. This review seeks to highlight possible functional connections between skeletal mechanical signals and breast cancer bone metastasis and their contribution to clinical outcome. It provides an introduction to the physical and biological signals underlying bone functional adaptation and discusses the modulatory roles of mechanical loading and breast cancer metastasis in this process. Following a definition of biophysical design criteria, in vitro and in vivo approaches from the fields of bone biomechanics and tissue engineering that may be suitable to investigate breast cancer bone metastasis as a function of varied mechano-signaling will be reviewed. Finally, an outlook of future opportunities and challenges associated with this newly emerging field will be provided.

The impact of low-magnitude high-frequency vibration on fracture healing is profoundly influenced by the oestrogen status in mice

Fracture healing is impaired in aged and osteoporotic individuals. Because adequate mechanical stimuli are able to increase bone formation, one therapeutical approach to treat poorly healing fractures could be the application of whole-body vibration, including low-magnitude high-frequency vibration (LMHFV). We investigated the effects of LMHFV on fracture healing in aged osteoporotic mice. Female C57BL/6NCrl mice (n=96) were either ovariectomised (OVX) or sham operated (non-OVX) at age 41 weeks. When aged to 49 weeks, all mice received a femur osteotomy that was stabilised using an external fixator. The mice received whole-body vibrations (20 minutes/day) with 0.3 G: peak-to-peak acceleration and a frequency of 45 Hz. After 10 and 21 days, the osteotomised femurs and intact bones (contra-lateral femurs, lumbar spine) were evaluated using bending-testing, micro-computed tomography (μCT), histology and gene expression analyses. LMHFV disturbed fracture healing in aged non-OVX mice, with significantly reduced flexural rigidity (-81%) and bone formation (-80%) in the callus. Gene expression analyses demonstrated increased oestrogen receptor β (ERβ, encoded by Esr2) and Sost expression in the callus of the vibrated animals, but decreased β-catenin, suggesting that ERβ might mediate these negative effects through inhibition of osteoanabolic Wnt/β-catenin signalling. In contrast, in OVX mice, LMHFV significantly improved callus properties, with increased flexural rigidity (+1398%) and bone formation (+637%), which could be abolished by subcutaneous oestrogen application (0.025 mg oestrogen administered in a 90-day-release pellet). On a molecular level, we found an upregulation of ERα in the callus of the vibrated OVX mice, whereas ERβ was unaffected, indicating that ERα might mediate the osteoanabolic response. Our results indicate a major role for oestrogen in the mechanostimulation of fracture healing and imply that LMHFV might only be safe and effective in confined target populations.

Mechanically induced osteogenic lineage commitment of stem cells

Bones adapt to accommodate the physical forces they experience through changes in architecture and mass. Stem cells differentiate into bone-forming osteoblasts, and mechanical stimulation is involved in this process. Various studies have applied controlled mechanical stimulation to stem cells and investigated the effects on osteogenic lineage commitment. These studies demonstrate that physical stimuli can induce osteogenic lineage commitment. Tension, fluid shear stress, substrate material properties, and cell shape are all factors that influence osteogenic differentiation. In particular, the level of tension is important. Also, rigid substrates with stiffness similar to collagenous bone induce osteogenic differentiation, while softer substrates induce other lineages. Finally, cells allowed to adhere over a larger area are able to differentiate towards the osteogenic lineage while cells adhering to a smaller area are restricted to the adipogenic lineage. Stem cells are able to sense their mechanical environments through various mechanosensors, including the cytoskeleton, focal adhesions, and primary cilia. The cytoskeleton provides a structural frame for the cell, and myosin interacts with actin to generate cytoskeletal tension, which is important for mechanically induced osteogenesis of stem cells. Adapter proteins link the cytoskeleton to integrins, which attach the cell to the substrate, forming a focal adhesion. A variety of signaling proteins are also associated with focal adhesions. Forces are transmitted to the substrate at these sites, and an intact focal adhesion is important for mechanically induced osteogenesis. The primary cilium is a single, immotile, antenna-like structure that extends from the cell into the extracellular space. It has emerged as an important signaling center, acting as a microdomain to facilitate biochemical signaling. Mechanotransduction is the process by which physical stimuli are converted into biochemical responses. When potential mechanosensors are disrupted, the activities of components of mechanotransduction pathways are also inhibited, preventing mechanically induced osteogenesis. Calcium, mitogen-activated protein kinase/extracellular signal-regulated kinase, Wnt, Yes-associated protein/transcriptional coactivator with PDZ-binding motif and RhoA/Rho kinase signaling are some of the mechanotransduction pathways proposed to be important. In this review, types of mechanical stimuli, mechanosensors, and key pathways involved in mechanically induced osteogenesis of stem cells are discussed.

Nitric oxide in human gingival crevicular fluid after orthodontic force application

Nitric oxide (NO) is involved in bone remodelling and has been shown to play a role in regulating the rate of orthodontic tooth movement (OTM) in rat models. In humans, however, the role of NO in OTM remains less clear. In this study, NO concentration in gingival crevicular fluid (GCF) was measured in patients undergoing orthodontic treatment. Thirteen male participants (ages 11-18 years) planned for non-extraction fixed orthodontic therapy were recruited. Samples of GCF were collected from each maxillary central incisor and first and second molar immediately before (T0), 1h after (T1), and 3-4 days after (T2) application of light orthodontic forces. The maxillary second molars were not included in the appliance and served as controls. Measureable NO levels were consistently obtained from all sampled sites. Total NO levels showed significantly higher NO levels (p<0.05) at T1 at the buccal surfaces of the central incisors when compared to the first and second molars. The results indicate a possible role for NO in OTM at the pressure sites of incisors at early time points. Further studies are required to determine whether NO levels in the periodontal ligament tissues of human teeth during OTM are affected by a force gradient and the magnitude of the applied force.

Influence of heating and cyclic tension on the induction of heat shock proteins and bone-related proteins by MC3T3-E1 cells

Stress conditioning (e.g., thermal, shear, and tensile stress) of bone cells has been shown to enhance healing. However, prior studies have not investigated whether combined stress could synergistically promote bone regeneration. This study explored the impact of combined thermal and tensile stress on the induction of heat shock proteins (HSPs) and bone-related proteins by a murine preosteoblast cell line (MC3T3-E1). Cells were exposed to thermal stress using a water bath (44°C for 4 or 8 minutes) with postheating incubation (37°C for 4 hours) followed by exposure to cyclic strain (equibiaxial 3%, 0.2 Hz, cycle of 10-second tensile stress followed by 10-second rest). Combined thermal stress and tensile stress induced mRNA expression of HSP27 (1.41 relative fold induction (RFI) compared to sham-treated control), HSP70 (5.55 RFI), and osteopontin (1.44 RFI) but suppressed matrix metalloproteinase-9 (0.6 RFI) compared to the control. Combined thermal and tensile stress increased vascular endothelial growth factor (VEGF) secretion into the culture supernatant (1.54-fold increase compared to the control). Therefore, combined thermal and mechanical stress preconditioning can enhance HSP induction and influence protein expression important for bone tissue healing.

Hydraulic Pressure during Fluid Flow Regulates Purinergic Signaling and Cytoskeleton Organization of Osteoblasts

During physiological activities, osteoblasts experience a variety of mechanical forces that stimulate anabolic responses at the cellular level necessary for the formation of new bone. Previous studies have primarily investigated the osteoblastic response to individual forms of mechanical stimuli. However in this study, we evaluated the response of osteoblasts to two simultaneous, but independently controlled stimuli; fluid flow-induced shear stress (FSS) and static or cyclic hydrostatic pressure (SHP or CHP, respectively). MC3T3-E1 osteoblasts-like cells were subjected to 12dyn/cm² FSS along with SHP or CHP of varying magnitudes to determine if pressure enhances the anabolic response of osteoblasts during FSS. For both SHP and CHP, the magnitude of hydraulic pressure that induced the greatest release of ATP during FSS was 15 mmHg. Increasing the hydraulic pressure to 50 mmHg or 100 mmHg during FSS attenuated the ATP release compared to 15 mmHg during FSS. Decreasing the magnitude of pressure during FSS to atmospheric pressure reduced ATP release to that of basal ATP release from static cells and inhibited actin reorganization into stress fibers that normally occurred during FSS with 15 mmHg of pressure. In contrast, translocation of nuclear factor kappa B (NFκB) to the nucleus was independent of the magnitude of hydraulic pressure and was found to be mediated through the activation of phospholipase-C (PLC), but not src kinase. In conclusion, hydraulic pressure during FSS was found to regulate purinergic signaling and actin cytoskeleton reorganization in the osteoblasts in a biphasic manner, while FSS alone appeared to stimulate NFκB translocation. Understanding the effects of hydraulic pressure on the anabolic responses of osteoblasts during FSS may provide much needed insights into the physiologic effects of coupled mechanical stimuli on osteogenesis.

Mechanoadaptation of developing limbs: shaking a leg

The proportion of total limb length taken up by the individual skeletal elements (limb proportionality), varies widely between species. These diverse skeletal forms have evolved to allow for a range of limb uses and they first emerge as the embryo develops, to achieve the characteristic skeletal architecture of each species. During this time, the developing skeleton experiences mechanical loading as a result of embryonic muscle contraction. The possibility that adaptation to such mechanical input may allow embryos to coordinate the appearance of skeletal design with their expanding range of movements has so far received little attention. This is surprising, given the critical role exerted by embryo movement in normal skeletal development; stage-specific in ovo immobilisation of embryonic chicks results in joint contractures and a reduction in longitudinal bone growth in the limbs. Epigenetic mechanisms allow for selective activation of genes in response to environmental signals, resulting in the production of phenotypic complexity in morphogenesis; mechanical loading of bone during movement appears to be one such signal. It may be that 'mechanosensitive' genes under regulation of mechanical input adjust proportionality along the bone's proximo-distal axis, introducing a level of phenotypic plasticity. If this hypothesis is upheld, species with more elongated distal limb elements will have a greater dependence on mechanical input for the differences in their growth, and mechanosensitive bone growth in the embryo may have evolved as an additional source of phenotypic diversity during skeletal development.

Characterization of calcium carbonate crystals in pigeon yolk sacs with different incubation times

Calcium carbonate crystals are known to form in the yolk sacs of fertile pigeon eggs at late stages of incubation. The composition and structure of these crystals were investigated, the crystallization environment was inspected, and the physical chemistry constants of the yolk fluid were determined through the incubation period. Polarized light microscopy was used to observe the generation and distribution of calcium carbonate crystals in the yolk sac. In addition, X-ray diffraction was employed to analyze the composition and crystal phase of the yolk sac. A decalcification and deproteination method was established to analyze the ultrastructure and composition of the crystals, as well as the internal relationship between inorganic and organic phases of the crystals. Additionally, scanning electron microscopy, transmission electron microscopy, X-ray energy dispersive spectroscopy, and Fourier transform infrared spectroscopy were used to evaluate the characteristics of the crystals. Our results demonstrated that the calcium carbonate crystals were mainly composed of vaterite and calcite, with vaterite being the major component. Vaterite, a type of biomaterial generated by an organic template control, presented as a concentric hierarchical spherical structure. The organic nature of the biomaterial prevented vaterite from transforming into calcite, which is more thermodynamically stable than vaterite. Additionally, the configuration, size, and aggregation of vaterite were also mediated by the organic template. This bio-vaterite was found during the incubation period and is valuable in calcium transport during embryonic development.

Mechanosignaling in bone health, trauma and inflammation

SIGNIFICANCE

Mechanosignaling is vital for maintaining the structural integrity of bone under physiologic conditions. These signals activate and suppress multiple signaling cascades regulating bone formation and resorption. Understanding these pathways is of prime importance to exploit their therapeutic potential in disorders associated with bone loss due to disuse, trauma, or disruption of homeostatic mechanisms.

RECENT ADVANCES

In the case of cells of the bone, an impressive amount of data has been generated that provides evidence of a complex mechanism by which mechanical signals can maintain or disrupt cellular homeostasis by driving transcriptional regulation of growth factors, matrix proteins and inflammatory mediators in health and inflammation. Mechanical signals act on cells in a magnitude dependent manner to induce bone deposition or resorption. During health, physiological levels of these signals are essential for maintaining bone strength and architecture, whereas during inflammation, similar signals can curb inflammation by suppressing the nuclear factor kappa B (NF-κB) signaling cascade, while upregulating matrix synthesis via mothers against decapentaplegic homolog and/or Wnt signaling cascades. Contrarily, excessive mechanical forces can induce inflammation via activation of the NF-κB signaling cascade.

CRITICAL ISSUES

Given the osteogenic potential of mechanical signals, it is imperative to exploit their therapeutic efficacy for the treatment of bone disorders. Here we review select signaling pathways and mediators stimulated by mechanical signals to modulate the strength and integrity of the bone.

FUTURE DIRECTIONS

Understanding the mechanisms of mechanotransduction and its effects on bone lay the groundwork for development of nonpharmacologic mechanostimulatory approaches for osteodegenerative diseases and optimal bone health.

The role of midkine in skeletal remodelling

Bone tissue is subjected to continuous remodelling, replacing old or damaged bone throughout life. In bone remodelling, the coordinated activities of bone-forming osteoblasts and bone-resorbing osteoclasts ensure the maintenance of bone mass and strength. In early life, the balance of these cellular activities is tightly regulated by various factors, including systemic hormones, the mechanical environment and locally released growth factors. Age-related changes in the activity of these factors in bone remodelling can result in diseases with low bone mass, such as osteoporosis. Osteoporosis is a systemic and age-related skeletal disease characterized by low bone mass and structural degeneration of bone tissue, predisposing the patient to an increased fracture risk. The growth factor midkine (Mdk) plays a key role in bone remodelling and it is expressed during bone formation and fracture repair. Using a mouse deficient in Mdk, our group have identified this protein as a negative regulator of bone formation and mechanically induced bone remodelling. Thus, specific Mdk antagonists might represent a therapeutic option for diseases characterized by low bone mass, such as osteoporosis.

LINKED ARTICLES

This article is part of a themed section on Midkine. To view the other articles in this section visit http://dx.doi.org/10.1111/bph.2014.171.issue-4.

Effects of soy isoflavones and mechanical vibration on rat bone tissue

OBJECTIVE

To investigate the effects of soy isoflavones (Iso) and mechanical vibration treatments alone or combined on bone extracellular matrix constituents of ovariectomized rats.

METHODS

Forty female Wistar rats at the age of 6 months were ovariectomized (Ovx) and ten were sham-operated (sham). After 3 months, the animals were divided into five groups: GI (sham); GII (Ovx); GIII, ovariectomized and orally treated with isoflavones (200 mg/kg) for 90 consecutive days; GIV, ovariectomized and submitted to vibration for 90 days (5 days/week); GV, ovariectomized and treated with isoflavones plus vibration. After treatments, the rats were euthanized, and their femurs were removed for histological routine and biochemical study. Histological sections were stained with hematoxylin-eosin, picrosirius red and alcian blue. Shaft of femurs were submitted to biochemical assay and tibias were subjected to biophysical and biomechanical tests.

RESULTS

Treatments did not have significant effects on the trabecular bone volume, but the combined treatments showed trophic effects on the cortical bone width and area. Bone density and the content of organic material of the tibias were higher in the GIV and GV groups. The GV group showed the highest presence of mature collagen fibers and content of total glycosaminoglycans, while the highest contents of chondroitin sulfate and other sulfated glycosaminoglycans were seen in the GIV group.

CONCLUSION

The mechanical vibration treatment is more efficient than soy isoflavones in improving bone quality by increasing the bone density, the content of sulfated glycosaminoglycans and the presence of mature collagen fibers. In addition, the combined interventions have partial trophic and synergistic effects that are bone site-specific in ovariectomized rats.

Effect of biphasic electrical current stimulation on IL-1β-stimulated annulus fibrosus cells using in vitro microcurrent generating chamber system

STUDY DESIGN

Human annulus fibrosus (AF) cells were stimulated in vitro with interleukin (IL)-1β and exposed to biphasic electrical currents.

OBJECTIVE

To identify the effect of biphasic electrical currents on the production of the extracellular matrix-modifying enzymes and inflammatory mediators in IL-1β-stimulated AF cells.

SUMMARY OF BACKGROUND DATA

Symptomatic disc degeneration is an important cause of chronic intractable lumbar pain and is associated with macrophage-mediated inflammation in the AF. The inflammatory reaction relationship has not been studied in the AF.

METHODS

Human AF cells were treated with 1 ng/mL IL-1β and cultured in a microcurrent generating chamber system. The levels of matrix metalloproteinase (MMP)-1, MMP-3, tissue inhibitor of metalloproteinase (TIMP)-1, TIMP-2, IL-6, IL-8, vascular endothelial growth factor (VEGF), insulin-like growth factor, and nitric oxide (NO) were measured. Expression of cyclooxygenase 2 and type I collagen mRNA was analyzed.

RESULTS

Compared with unstimulated cells, IL-1β-stimulated AF cells produced significantly higher levels of MMP-1, MMP-3, IL-6, IL-8, NO, and VEGF, and lower levels of TIMP-1 and TIMP-2. Exposure to a 250-mV/mm field induced time-dependent increases in IL-6, NO, MMP-1, TIMP-1, VEGF, and insulin-like growth factor-1 production. The cells exposed to 500-mV/mm field produced significantly less MMP-1, TIMP-1, IL-6, and VEGF than unexposed cells (MMP-1, 17.2 ± 4.7 ng/mL vs. 27.3 ± 3.9 ng/mL, P< 0.05; TIMP-1, 12.4 ± 3.3 ng/mL vs. 22.3 ± 2.1 ng/mL, P< 0.02; IL-6, 2.5 ± 0.9 ng/mL vs. 6.39 ± 1.90 ng/mL, P< 0.05; and VEGF, 0.1 ± 0.04 ng/mL vs. 0.44 ± 0.15 ng/mL, P< 0.03). NO production was markedly increased at 500 mV/mm (P< 0.0001).

CONCLUSION

We showed that exposure of IL-1β-stimulated AF cells to a 500 mV/mm inhibited MMP-1, IL-6, VEGF, and TIMP-1 production. The results suggest that biphasic electrical current stimulation may have efficacy in diminishing symptomatic disc degeneration.

LEVEL OF EVIDENCE

N/A.

R-Spondin 1 promotes vibration-induced bone formation in mouse models of osteoporosis

Bone tissue adapts to its functional environment by optimizing its morphology for mechanical demand. Among the mechanosensitive cells that recognize and respond to forces in the skeleton are osteocytes, osteoblasts, and mesenchymal progenitor cells (MPCs). Therefore, the ability to use mechanical signals to improve bone health through exercise and devices that deliver mechanical signals is an attractive approach to age-related bone loss; however, the extracellular or circulating mediators of such signals are largely unknown. Using SDS-PAGE separation of proteins secreted by MPCs in response to low-magnitude mechanical signals and in-gel trypsin digestion followed by HPLC and mass spectroscopy, we identified secreted proteins up-regulated by vibratory stimulation. We exploited a cell senescence-associated secretory phenotype screen and reasoned that a subset of vibration-induced proteins with diminished secretion by senescent MPCs will have the capacity to promote bone formation in vivo. We identified one such vibration-induced bone-enhancing (vibe) gene as R-spondin 1, a Wnt pathway modulator, and demonstrated that it has the capacity to promote bone formation in three mouse models of age-related bone loss. By virtue of their secretory status, some vibe proteins may be candidates for pre-clinical development as anabolic agents for the treatment of osteoporosis.

KEY MESSAGE

Mesenchymal stem cells respond to low magnitude mechanical signals (vibration). R-Spondin 1 is upregulated by mechanical signals and secreted. R-Spondin 1 promotes bone formation in three mouse models of osteoporosis.

Multiscale analysis of changes in an anisotropic collagen gel structure by culturing osteoblasts

Mimicking the complicated anisotropic structures of a native tissue is extremely important in tissue engineering. In a previous study, we developed an anisotropic collagen gel scaffold (ACGS) having a hierarchical structure and a properties gradient. In this study, our objective was to see how cells remodel the scaffolds through the cells-ACGS interaction. For this purpose, we cultured osteoblastic cells on ACGS, which we regarded as a model system for the cells-extracellular matrix (cell-ECM) interaction. Changes in the ACGS-cell composites structure by cell-ECM interactions was investigated from a macroscopic level to a microscopic level. Osteoblastic cells were also cultured on an isotropic collagen gel (ICGS) as a control. During the cultivation, mechanical stimuli were applied to collagen-cell composites for adequate matrix remodeling. Confocal laser scanning microscope (CLSM) was used to observe macroscopic changes in the ACGS-cell composite structure by osteoblastic cells. Small-angle X-ray scattering (SAXS) measurements were performed to characterize microscopic structural changes in the composites. Macroscopic observations using CLSM revealed that osteoblastic cells remained only in the diluted phase in ACGS and they collected collagen fibrils or formed a toroidal structure, depending on the depth from the ACGS surface in the tubular diluted phase. The cells were uniformly distributed in ICGS. SAXS analysis suggests that collagen fibrils were remodeled by osteoblastic cells, and this remodeling process would be affected by the structure difference between ACGS and ICGS. These results suggest that we directly regulate cell-ECM interaction by the unique anisotropic and hierarchical structure of ACGS. The cell-gel composite presented in this study would promise an efficient scaffold material in tissue engineering.

Integrin-mediated osteoblastic adhesion on a porous manganese-incorporated TiO2 coating prepared by plasma electrolytic oxidation

This study was conducted to evaluate the bioactivity of manganese-incorporated TiO₂ (Mn-TiO₂) coating prepared on titanium (Ti) plate by plasma electrolytic oxidation (PEO) technique in Ca-, P- and Mn-containing electrolytes. The surface topography, phase and element compositions of the coatings were investigated using scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectrometry (EDS), respectively. The adhesion of osteoblast-like MG63 cells onto Ti, TiO₂ and Mn-TiO₂ surfaces was evaluated, and the signal transduction pathway involved was confirmed by the sequential expression of the genes for integrins β₁, β₃, α₁ and α₃, focal adhesion kinase (FAK), and the extracellular regulated kinases (ERKs), including ERK1 and ERK2. The results obtained indicated that Mn was successfully incorporated into the porous nanostructured TiO₂ coating, and did not alter the surface topography or the phase composition of the coating. The adhesion of the MG63 cells onto the Mn-incorporated TiO₂ coating was significantly enhanced compared with that on the Mn-free TiO₂ coating and the pure Ti plates. In addition, the enhanced cell adhesion on the Mn-TiO₂ coatings may have been mediated by the binding of the integrin subunits, β₁ and α₁, and the subsequent signal transduction pathway, involving FAK and ERK2. The study indicated that the novel Mn-TiO₂ coating has potential for orthopedic implant applications, and that further investigations are required.

Short periods of cyclic mechanical strain enhance triple-supplement directed osteogenesis and bone nodule formation by human embryonic stem cells in vitro

Human embryonic stem cells (hESCs) are uniquely endowed with a capacity for both self-renewal and multilineage differentiation. The aim of this investigation was to determine if short periods of cyclic mechanical strain enhanced dexamethasone, ascorbic acid, and β-glycerophosphate (triple-supplement)-induced osteogenesis and bone nodule formation by hESCs. Colonies were cultured for 21 days and divided into control (no stretch) and three treatment groups; these were subjected to in-plane deformation of 2% for 5 s (0.2 Hertz) every 60 s for 1 h on alternate days in BioFlex plates linked to a Flexercell strain unit over the following periods (day 7-13), (day 15-21), and (day 7-21). Numerous bone nodules were formed, which stained positively for osteocalcin and type I collagen; in addition, MTS assays for cell number as well as total collagen assays showed a significant increase in the day 7-13 group compared to controls and other treatment groups. Alizarin Red staining further showed that cyclic mechanical stretching significantly increased the nodule size and mineral density between days 7-13 compared to control cultures and the other two experimental groups. We then performed a real-time polymerase chain reaction (PCR) microarray on the day 7-13 treatment group to identify mechanoresponsive osteogenic genes. Upregulated genes included the transcription factors RUNX2 and SOX9, bone morphogenetic proteins BMP1, BMP4, BMP5, and BMP6, transforming growth factor-β family members TGFB1, TGFB2, and TGFB3, and three genes involved in mineralization-ALPL, BGLAP, and VDR. In conclusion, this investigation has demonstrated that four 1-h episodes of cyclic mechanical strain acted synergistically with triple supplement to enhance osteogenesis and bone nodule formation by cultured hESCs. This suggests the development of methods to engineer three-dimensional constructs of mineralized bone in vitro, could offer an alternative approach to osseous regeneration by producing a biomaterial capable of providing stable surfaces for osteoblasts to synthesize new bone, while at the same time able to be resorbed by an osteoclastic activity-in other words, one that can recapitulate the remodeling dynamics of a naturally occurring bone matrix.

Co-regulation of LPS and tensile strain downregulating osteogenicity via c-fos expression

AIMS

Orthodontic forces are known to aggravate inflammation-induced destruction of the periodontium, but the underlying mechanism has not been elucidated. The present study investigates how inflammation and forces co-regulate periodontium damage.

MAIN METHODS

Cultures of MC3T3-E1 osteoblasts were pre-treated with conditioned medium from RAW264.7 macrophages exposed to 100ng/ml Porphyromonas gingivalis (Pg)-LPS. Conditioned medium was analyzed by ELISA for interleukin-1 beta (IL-1β), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-α). Osteoblasts were then subjected to tensile strain (0.5Hz; 1000μ or 3000μ) for 0min, 5min, 15min, 30min, 1h, 3h, and 6h. The cultures were analyzed for mRNA and protein levels of c-fos. Cells were also analyzed for alkaline phosphatase (ALP) activity.

KEY FINDINGS

(Pg)-LPS stimulated the secretion of all three cytokines from RAW264.7 cells in a dose- and time-dependent manner. Medium from (Pg)-LPS stimulated cells induced a 10-fold increase in c-fos expression, which decreased to a 4-fold plateau after 3h. In contrast, ALP activity of control osteoblasts decreased during the first 60min, then recovered over the next 4h. Pretreatment with conditioned medium generated the same initial decrease during tensile strain but prevented the recovery.

SIGNIFICANCE

Our study showed, for the first time, that the inhibitory effect of inflammation and tensile strain on osteogenicity is associated with the upregulation in c-fos expression. In addition, inflammation may reduce the ability of osteoblasts to restore their osteogenic capacity during sustained tensile stress and contribute to periodontium damage.

Bone formation in rabbit cancellous bone explant culture model is enhanced by mechanical load

Background

When studying and designing an artificial bone in vitro with similar features and functionality of natural bone by tissue engineering technology, the culturing environment, especially the mechanical environment is supposed to be an important factor, because a suitable mechanical environment in vitro may improve the adaptability of the planted-in tissue engineering bone in the body. Unfortunately, up to now, the relationship between mechanical stimuli and natural bone growth has not yet been precisely determined, and it is so imperative for a prior study on effect of mechanical loading on growth of the natural bone cultured in vitro.

Methods

Under sterile conditions, explant models of rabbit cancellous bone with 3 mm in thickness and 8 mm in diameter were prepared and cultured in a dynamic loading and circulating perfusion bioreactor system. By Micro-CT scanning, a 3D model for finite element (FEM) analysis was achieved. According to the results of FEM analysis and physiological load bearing capacity of the natural bone, these models were firstly subjected to mechanical load with 1Hz frequency causing average apparent strain of 1000 μϵ, 2000 μϵ, 3000 μϵ and 4000 μϵ respectively for 30 min every day, activities of alkaline phosphatase (AKP) were detected on the 5^th and the 14^th loading day and on the 14^th and the 21^st day, mechanical properties, tissue mineral density (TMD) of the bone explant models were investigated and Von-kossa staining and fluorescence double labeling assays were conducted to evaluate whether there were fresh osteoid in the bone explant models. In addition, Western blot, Elisa and Real-time PCR were employed to analyze expression of Collagen-I (COL-1), bone morphogenetic protein-2 (BMP-2) and osteoprotegerin (OPG) protein and RNA.

Results

The explant models of rabbit cancellous bone prepared under sterile conditions grew well in the bioreactor system. With the increasing culturing time and load levels, bone explant models in groups with 1000 μϵ and 2000 μϵ average apparent strain experienced improving mechanical properties and TMD (P<0.05), and results of Von-kossa staining and fluorescence double labeling also showed apparent fresh osteoid formation. Under the same loading conditions, a up-regulations in protein and RNA of COL-1, BMP-2 and OPG were detected, especially, relative genes notably expressed after 21 days.

Conclusion

Our study demonstrated that mechanical load could improve function and activity of osteoblasts in explant models of cancellous bone. Through regulations of COL-1, OPG and BMP-2 secreted by osteoblasts, the mechanical load could improve the tissue structural density and stiffness due to formation of fresh osteoid.

The effect of mechanical strain on soft (cardiovascular) and hard (bone) tissues: common pathways for different biological outcomes

Mechanical stress plays a pivotal role in developing and maintaining tissues functionalities. Cells are constantly subjected to strain and compressive forces that are sensed by specialized membrane mechanosensors and converted in biochemical signals able to differently influence cellular behavior in terms of surviving, differentiation and extracellular matrix remodeling. This review focuses on the effects of mechanical strain on soft and hard tissues. Unexpectedly, different cells share almost the same membrane mechanosensors and the relative intracellular pathways, but to ultimately obtain very different biological effects. The events occurring in cardiovascular and bone tissues are treated in details, showing that integrins, cadherins, growth factor receptors and ions channels specifically expressed in the different tissues are the major actors of the sight. However, MAPkinases and RhoGTPases are mainly involved in the biochemical intracellular signaling directed to nuclear modifications.

Ex vivo real-time observation of Ca(2+) signaling in living bone in response to shear stress applied on the bone surface

Bone cells respond to mechanical stimuli by producing a variety of biological signals, and one of the earliest events is intracellular calcium ([Ca(2+)](i)) mobilization. Our recently developed ex vivo live [Ca(2+)](i) imaging system revealed that bone cells in intact bone explants showed autonomous [Ca(2+)](i) oscillations, and osteocytes specifically modulated these oscillations through gap junctions. However, the behavior and connectivity of the [Ca(2+)](i) signaling networks in mechanotransduction have not been investigated in intact bone. We herein introduce a novel fluid-flow platform for probing cellular signaling networks in live intact bone, which allows the application of capillary-driven flow just on the bone explant surface while performing real-time fluorogenic monitoring of the [Ca(2+)](i) changes. In response to the flow, the percentage of responsive cells was increased in both osteoblasts and osteocytes, together with upregulation of c-fos expression in the explants. However, enhancement of the peak relative fluorescence intensity was not evident. Treatment with 18 α-GA, a reversible inhibitor of gap junction, significantly blocked the [Ca(2+)](i) responsiveness in osteocytes without exerting any major effect in osteoblasts. On the contrary, such treatment significantly decreased the flow-activated oscillatory response frequency in both osteoblasts and osteocytes. The stretch-activated membrane channel, when blocked by Gd(3+), is less affected in the flow-induced [Ca(2+)](i) response. These findings indicated that flow-induced mechanical stimuli accompanied the activation of the autonomous [Ca(2+)](i) oscillations in both osteoblasts and osteocytes via gap junction-mediated cell-cell communication and hemichannel. Although how the bone sense the mechanical stimuli in vivo still needs to be elucidated, the present study suggests that cell-cell signaling via augmented gap junction and hemichannel-mediated [Ca(2+)](i) mobilization could be involved as an early signaling event in mechanotransduction.

p38-MAPK signaling pathway is not involved in osteogenic differentiation during early response of mesenchymal stem cells to continuous mechanical strain

Mechanical stimuli play a significant role in the regulation of bone remodeling during orthodontic tooth movement. However, the correlation between mechanical strain and bone remodeling is still poorly understood. In this study, we used a model of continuous mechanical strain (CMS) on bone mesenchymal stem cells (BMSCs) to investigate the proliferation and osteogenic differentiation of BMSCs and the mechanism of mechano-transduction. A CMS of 10 % at 1 Hz suppressed the proliferation of BMSCs and induced early osteogenic differentiation within 48 h by activating Runx2 and increasing alkaline phosphatase (ALP) activity and mRNA expression of osteogenesis-related genes (ALP, collagen type I, and osteopontin). Regarding mitogen-activated protein kinase (MAPK) activation, CMS induced phased phosphorylation of p38 consisting of a rapid induction of p38 MAPK at 10 min and a rapid decay after 1 h. Furthermore, the potent p38 inhibitor SB203580 blocked the induction of p38 MAPK signaling, but had little effect on subsequent osteogenic events. These results demonstrate that mechanical strain may act as a stimulator to induce the differentiation of BMSCs into osteoblasts, which is a vital function for bone formation in orthodontic tooth movement. However, activation of the p38 signaling pathway may not be involved in this process.

Low-Frequency Mechanical Stimulation Modulates Osteogenic Differentiation of C2C12 Cells

Mechanical stimulation influences stem cell differentiation and may therefore provide improved lineage specification control for clinical applications. Low-frequency oscillatory mechanical stimulation (0.01 Hz) has recently been shown to suppress adipogenic differentiation of mesenchymal stem cells, indicating that the range of effective stimulation frequencies is not limited to those associated with locomotion, circulation, and respiration. We hypothesized that low-frequency mechanical stimulation (0.01 Hz) can also promote osteogenic cell differentiation of myoblastic C2C12 cells in combination with BMP-2. Results indicate that low-frequency mechanical stimulation can significantly enhance osteogenic gene expression, provided that differentiation is initiated by a priming period involving BMP-2 alone. Subsequent application of low-frequency mechanical stimulation appears to act synergistically with continued BMP-2 exposure to promote osteogenic differentiation of C2C12 cells and can even partially compensate for the removal of BMP-2. These effects may be mediated by the ERK and Wnt signalling pathways. Osteogenic induction of C2C12 cells by low-frequency mechanical stimulation is therefore critically dependent upon previous exposure to growth factors, and the timing of superimposed BMP-2 and mechanical stimuli can sensitively influence osteogenesis. These insights may provide a technically simple means for control of stem cell differentiation in cell-based therapies, particularly for the enhancement of differentiation toward desired lineages.