Oxygen reduction reaction mechanism on nitrogen-doped graphene: A density functional theory study

Recent Progresses in Oxygen Reduction Reaction Electrocatalysts for Electrochemical Energy Applications

Abstract

Electrochemical energy storage systems such as fuel cells and metal–air batteries can be used as clean power sources for electric vehicles. In these systems, one necessary reaction at the cathode is the catalysis of oxygen reduction reaction (ORR), which is the rate-determining factor affecting overall system performance. Therefore, to increase the rate of ORR for enhanced system performances, efficient electrocatalysts are essential. And although ORR electrocatalysts have been intensively explored and developed, significant breakthroughs have yet been achieved in terms of catalytic activity, stability, cost and associated electrochemical system performance. Based on this, this review will comprehensively present the recent progresses of ORR electrocatalysts, including precious metal catalysts, non-precious metal catalysts, single-atom catalysts and metal-free catalysts. In addition, major technical challenges are analyzed and possible future research directions to overcome these challenges are proposed to facilitate further research and development toward practical application.

Graphic Abstract

Directly transforming copper (I) oxide bulk into isolated single-atom copper sites catalyst through gas-transport approach

Single-atom metal catalysts have sparked tremendous attention, but direct transformation of cheap and easily obtainable bulk metal oxide into single atoms is still a great challenge. Here we report a facile and versatile gas-transport strategy to synthesize isolated single-atom copper sites (Cu ISAS/NC) catalyst at gram levels. Commercial copper (I) oxide powder is sublimated as mobile vapor at nearly melting temperature (1500 K) and subsequently can be trapped and reduced by the defect-rich nitrogen-doped carbon (NC), forming the isolated copper sites catalyst. Strikingly, this thermally stable Cu ISAS/NC, which is obtained above 1270 K, delivers excellent oxygen reduction performance possessing a recorded half-wave potential of 0.92 V vs RHE among other Cu-based electrocatalysts. By varying metal oxide precursors, we demonstrate the universal synthesis of different metal single atoms anchored on NC materials (M ISAS/NC, where M refers to Mo and Sn). This strategy is readily scalable and the as-prepared sintering-resistant M ISAS/NC catalysts hold great potential in high-temperature applications.

Single-atom catalysts attract lots of attention, but direct transformation of bulk metal oxide into single atoms remains challenging. Here the authors report a gas-transport route to transform monolithic copper (I) oxide into copper single-atoms catalyst with a high activity for oxygen reduction.

Progress in Nonmetal-Doped Graphene Electrocatalysts for the Oxygen Reduction Reaction

Owing to energy shortages and environmental pollution, green energy sources such as polymer electrolyte fuel cells and metal-air batteries play a more and more important role, whereby the oxygen reduction reaction (ORR) is the rate-determining step. Development of high-efficiency and stable catalysts to facilitate the ORR is of importance. Graphene is a new type of material with two-dimensional structure and high surface area, which has wide-ranging applications in many fields. However, graphene with zero band gap shows low electrocatalytic activity toward the ORR. Introduction of nonmetal atoms can change the electronic arrangement, generate active sites, and further improve the catalytic activity of graphene. Some nonmetal-doping strategies (e.g., N, S, and P doping) can promote ORR activity. Herein, the recent development of nonmetal-doped graphene catalysts for ORR is reviewed. Some common synthetic methods for nonmetal-doped graphene materials are summarized, and the active sites and possible reaction mechanisms for ORR on various nonmetal-doped graphene catalysts are discussed.

Pyridinic-N Protected Synthesis of 3D Nitrogen-Doped Porous Carbon with Increased Mesoporous Defects for Oxygen Reduction

Nitrogen (N)-doped carbons are potential nonprecious metal catalysts to replace Pt for the oxygen reduction reaction (ORR). Pyridinic-N-C is believed to be the most active N group for catalyzing ORR. In this work, using zinc phthalocyanine as a precursor effectively overcomes the serious loss of pyridinic-N, which is commonly regarded as the biggest obstacle to catalytic performance enhancement upon adopting a second pyrolysis process, for the preparation of a 3D porous N-doped carbon framework (NDCF). The results show only ≈14% loss in pyridinic-N proportion in the Zn-containing sample during the second pyrolysis process. In comparison, a loss of ≈72% pyridinic-N occurs for the non-Zn counterpart. The high pyridinic-N proportion, the porous carbon framework produced upon NaCl removal, and the increased mesoporous defects in the second pyrolysis process make the as-prepared catalyst an excellent electrocatalyst for ORR, exhibiting a half-wave potential (E_1/2 = 0.88 V) up to 33 mV superior to state-of-the-art Pt/C and high four-electron selectivity (n > 3.83) in alkaline solution, which is among the best ORR activities reported for N-doped carbon catalysts. Furthermore, only ≈18 mV degradation in E_1/2 occurs after an 8000 cycles' accelerating stability test, manifesting the outstanding stability of the as-prepared catalyst.

Effect of Water on the Manifestation of the Reaction Selectivity of Nitrogen-Doped Graphene Nanoclusters toward Oxygen Reduction Reaction

We investigated the selectivity of N-doped graphene nanoclusters (N-GNCs) toward the oxygen reduction reaction (ORR) using first-principles calculations within the density functional theory. The results show that the maximum electrode potentials (U _Max) for the four-electron (4e^-) pathway are higher than those for the two-electron (2e^-) pathway at almost all of the reaction sites. Thus, the N-GNCs exhibit high selectivity for the 4e^- pathway, that is, the 4e^- reduction proceeds preferentially over the 2e^- reduction. Such high selectivity results in high durability of the catalyst because H₂O₂, which corrodes the electrocatalyst, is not generated. For the doping sites near the edge of the cluster, the value of U _Max greatly depends on the reaction sites. However, for the doping sites around the center of the cluster, the reaction-site dependence is hardly observed. The GNC with a nitrogen atom around the center of the cluster exhibits higher ORR catalytic capability compared with the GNC with a nitrogen atom in the vicinity of the edge. The results also reveal that the water molecule generated by the ORR enhances the selectivity toward the 4e^- pathway because the reaction intermediates are significantly stabilized by water.

Pyridinic Nitrogen-Doped Graphene Nanoshells Boost the Catalytic Efficiency of Palladium Nanoparticles for the N-Allylation Reaction

In this study, nitrogen-doped graphene nanoshells (N-GNS) were developed to support palladium nanoparticles (Pd/N-GNS) as an efficient and recyclable catalyst for the N-allylation reaction. N-GNS was synthesized through a facile hard-template method by using petroleum asphalt, followed by nitrogen doping by thermal annealing with urea, the contents and species of which could be altered by the calcination temperature. Palladium nanoparticles (Pd NPs) with an average diameter of 3.3 nm were homogeneously deposited onto the N-GNS support through a mild solvent-growth approach. The Pd/N-GNS exhibited a superior activity towards the N-allylation reaction, 6-fold higher than that of the pristine graphene nanoshells supporting the palladium catalyst. The Pd/N-GNS could be recycled several times without activity deterioration and metal leaching. The catalytic activity showed a linear correlation relationship with the pyridinic N content. Experimental and theoretical studies reveal strong metal-support interactions between the pyridinic N and palladium species, which can downsize the Pd NPs, modulate the electronic properties, and promote the adsorption of reactant, thereby significantly boosting the catalytic efficiency and stability for the N-allylation process. The present work could help unravel the roles of nitrogen-doped carbon supports and provides a feasible strategy to rationally design superior palladium catalysts for chemical transformations.

Effect of nitrogen-doping configuration in graphene on the oxygen reduction reaction

In this study, we investigate the oxygen reduction reaction (ORR) reactivity of nitrogen-doped graphene by using density functional theory (DFT), a computational quantum mechanical technique. Four doping configurations and five models were comprehensively studied: quaternary nitrogen (NQ), pyrrolic nitrogen (N5), two forms of pyridinic nitrogen (N6, N6nH) and three-pyridinic nitrogen (3N6). Models for possible sites during each step of ORR were set up and visualized to provide a platform to calculate the free energy of the reaction pathway to determine the suitability of each doping scenario. Associative mechanisms were displayed by all models except N5, which showed dissociative mechanism. The calculated free energy pathways demonstrate that the ranking of the reactivity for ORR by different nitrogen configurations from most reactive to least reactive is N6, NQ, N6nH, 3N6, and N5. Spin density and charge density aid in describing levels of reactivity.

Transition-metal single atoms in nitrogen-doped graphenes as efficient active centers for water splitting: a theoretical study

Highly active single-atom catalysts (SACs) have recently been intensively studied for their potential in the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER). Due to the existence of many such SAC systems, a general understanding of the trend and designing principle is necessary to discover an optimal SAC system. In this work, by using density functional theory (DFT), we investigated a series of late single transition metals (TM = Fe, Co, Ni, Cu, and Pd) anchored on various N doped graphenes (xN-TM, x = 1-4) as electrocatalysts for both the HER and OER. Solvent effects were taken into account using an implicit continuum model. Our results reveal that the catalytic activity of SACs is determined by the local coordination number of N and TM in the catalysts. Among the considered catalysts, a low-coordinated Co site, i.e. a triple-coordinated Co, exhibits a high catalytic activity toward the HER with a calculated hydrogen adsorption free energy of -0.01 eV, whereas a high-coordinated Co center, i.e. a quadruple-coordinated Co is a promising candidate for the OER with a low computed overpotential of -0.39 V, which are comparable to those of noble metal catalysts, indicating superior HER and OER performance of N-Co co-doped graphenes. The results shed light on the potential applications of TM and N co-doped graphenes as efficient single-atom bifunctional catalysts for water splitting, thereby functioning as promising candidates for hydrogen/oxygen production.

Insights into defective TiO2 in electrocatalytic N2 reduction: combining theoretical and experimental studies

Artificial N2 fixation via the Haber-Bosch process requires high temperature and high pressure at the expense of CO2 release. Electrochemical NH3 synthesis is emerging as an environmentally friendly alternative that operates under ambient conditions, calling for electrocatalysts with efficient N2 reduction reaction (NRR) performance. In this paper, we experimentally and theoretically prove that defective TiO2 on Ti mesh (d-TiO2/TM) acts as an electrocatalyst for the NRR. In 0.1 M HCl, d-TiO2/TM achieves a much higher NH3 yield of 1.24 × 10-10 mol s-1 cm-2 and FE of 9.17% at -0.15 V (versus reversible hydrogen electrode) than pristine TiO2 (NH3 yield: 0.17 × 10-10 mol s-1 cm-2; FE: 0.95%). Notably, d-TiO2/TM also shows great electrochemical stability and durability. Theoretical investigation further reveals the possible catalytic mechanism involved.

The mechanism and activity of oxygen reduction reaction on single atom doped graphene: a DFT method

Heteroatom doped graphene as a single-atom catalyst for oxygen reduction reaction (ORR) has received extensive attention in recent years. In this paper, the ORR activity of defective graphene anchoring single heteroatom (IIIA, IVA, VA, VIA and VIIA) was systematically investigated using a dispersion-corrected density functional theory method. For all of the 34 catalysts, 14 of which were further analyzed, and the Gibbs free energy of each elementary reaction was calculated. According to the scaling relationship between ΔG_OOH* and ΔG_OH*, we further analyzed the rate-determining step of the remaining 20 catalysts. The results show that when the ORR reaction proceeds in the path O₂ → OOH → O → OH → H₂O, the reaction energy barriers are lower than 0.8 eV for Te-SV, Sb-DV, Pb-SV, Pb-DV, As-SV, As-DV, B-SV, Sn-SV and N-SV. Our result provides a theoretical basis for further exploration of carbon-based single-atom catalysts for ORR.

Heteroatom doped graphene as a single-atom catalyst for oxygen reduction reaction (ORR) has received extensive attention in recent years.

PK, Peera SG, Liu J, He J, Liang T. Oxygen reduction reaction mechanism on P, N co-doped graphene: a density functional theory study

DFT calculations confirmed that the P–N coupled site changed the ORR pathway and improved the catalytic activity compared with single doping.

Carbonisation temperature dependence of electrochemical activity of nitrogen-doped carbon fibres from electrospinning as air-cathodes for aqueous-alkaline metal–air batteries

Poly-acrylonitrile (PAN)-derived carbon fibres were characterised as air electrode frameworks for aqueous-alkaline metal–air batteries, focussing on the influence of the carbonisation temperature on the structure and electrochemical properties. Elemental composition, (atomic) structure, electrical conductivity, and electrochemical performance related to the oxygen reduction were investigated for electrodes carbonised in the range from 300 °C to 1400 °C. Chemical and structural properties were analysed using elemental analysis, XPS, SEM, and Raman spectroscopy; electrical conductivities of the fibre networks were examined by four-point probe measurements. Electrochemical properties were evaluated using linear sweep voltammetry in 6 M KOH by the open circuit potentials, the cathodic current densities at given overpotentials, and required overpotentials at given current densities. The highest current density was obtained from fibres carbonised at 850 °C. The connection between the fibre characteristics and electrochemical properties are discussed, highlighting the importance of the nitrogen bonding state. The results provide a base for thedevelopment of high performance air electrodes.

Nitrogen-doped carbon fibres derived from electrospun poly-acrylonitrile display an optimum catalytic activity towards the oxygen reduction reaction in aqueous-alkaline metal–air batteries, when carbonised under argon at 850 °C.

Fe(CN)5@PIL-derived N-doped porous carbon with FeCxNy active sites as a robust electrocatalyst for the oxygen reduction reaction

FeC_xN_y/N-PC catalysts derived by Fe(CN)5@PILs show high performance and catalytic activity for the ORR.

Entropic corrections for the evaluation of the catalytic activity in the Al(iii) catalysed formation of cyclic carbonates from CO2 and epoxides

Entropic corrections are found to be crucial for evaluating the catalytic performance in solution for the reaction of CO₂ with epoxides.

Mechanistic insight into electroreduction of carbon dioxide on FeNx (x = 0–4) embedded graphene

In this work, the catalytic performance of FeN_x–gra (x = 0–4) towards CO₂ER was investigated. Based on the computed free energy profiles of CO₂ER on FeN_x–gra (x = 0–4), FeN₃–gra exhibits considerably low overpotential for CH₃OH and CH₄ generation.

Catalysis with Two-Dimensional Materials Confining Single Atoms: Concept, Design, and Applications

Two-dimensional materials and single-atom catalysts are two frontier research fields in catalysis. A new category of catalysts with the integration of both aspects has been rapidly developed in recent years, and significant advantages were established to make it an independent research field. In this Review, we will focus on the concept of two-dimensional materials confining single atoms for catalysis. The new electronic states via the integration lead to their mutual benefits in activity, that is, two-dimensional materials with unique geometric and electronic structures can modulate the catalytic performance of the confined single atoms, and in other cases the confined single atoms can in turn affect the intrinsic activity of two-dimensional materials. Three typical two-dimensional materials are mainly involved here, i.e., graphene, g-C₃N₄, and MoS₂, and the confined single atoms include both metal and nonmetal atoms. First, we systematically introduce and discuss the classic synthesis methods, advanced characterization techniques, and various catalytic applications toward two-dimensional materials confining single-atom catalysts. Finally, the opportunities and challenges in this emerging field are featured on the basis of its current development.

Defects on carbons for electrocatalytic oxygen reduction

The exploration of highly active and durable cathodic oxygen reduction reaction (ORR) catalysts with economical production costs is still the bottleneck to realize the large-scale commercialization of fuel cells. In recent years, remarkable progress has been achieved in fabricating effective non-precious metal based ORR catalysts. In particular, modified carbon materials have aroused extensive research interest because of their excellent performance and low cost. In this review, we present an overview on recent advancements in developing defective carbon based materials for catalyzing the ORR. In particular, three general kinds of defective carbon electrocatalysts will be summarized. They are non-metal induced defective carbons (modified by heteroatoms), intrinsic defective carbons (defects created by a physical or chemical method), and atomic metal species induced/coordinated defective carbons (metal-macrocycle complexes with different coordination environments). The common configurations of various defective carbons will be discussed, with typical examples on recently developed both metal-free and precious/non-precious metal species coordinated carbons. Finally, the future research directions of the defective carbon materials are proposed. The newly established defect promoted catalysis mechanism will be beneficial for the design and fabrication of highly effective electrocatalysts for practical energy storage and conversion applications.

Hierarchical Flowerlike Highly Synergistic Three-Dimensional Iron Tungsten Oxide Nanostructure-Anchored Nitrogen-Doped Graphene as an Efficient and Durable Electrocatalyst for Oxygen Reduction Reaction

A unique and novel structural morphology with high specific surface area, highly synergistic, remarkable porous conductive networks with outstanding catalytic performance, and durability of oxygen reduction electrocatalyst are typical promising properties in fuel cell application; however, exploring and interpreting this fundamental topic is still a challenging task in the whole world. Herein, we have demonstrated a simple and inexpensive synthesis strategy to design three-dimensional (3D) iron tungsten oxide nanoflower-anchored nitrogen-doped graphene (3D Fe-WO₃ NF/NG) hybrid for a highly efficient synergistic catalyst for oxygen reduction reaction (ORR). The construction of flowerlike Fe-WO₃ nanostructures, based on synthesis parameters, and their ORR performances are systematically investigated. Although pristine 3D Fe-WO₃ NF or reduced graphene oxides show poor catalytic performance and even their hybrid shows unsatisfactory results, impressively, the excellent ORR activity and its outstanding durability are further improved by N doping, especially due to pyridinic and graphitic nitrogen moieties into a graphene sheet. Remarkably, 3D Fe-WO₃ NF/NG hybrid nanoarchitecture reveals an outstanding electrocatalytic performance with a remarkable onset potential value (∼0.98 V), a half-wave potential (∼0.85 V) versus relative hydrogen electrode, significant methanol tolerance, and extraordinary durability of ∼95% current retention, even after 15 000 potential cycles, which is superior to a commercial Pt/C. The exclusive porous architecture, excellent electrical conductivity, and the high synergistic interaction between 3D Fe-WO₃ NF and NG sheets are the beneficial phenomena for such admirable catalytic performance. Therefore, this finding endows design of a highly efficient and durable nonprecious metal-based electrocatalyst for high-performance ORR in alkaline media.

Metal-free catalysis based on nitrogen-doped carbon nanomaterials: a photoelectron spectroscopy point of view

In this review, we discuss the use of doped carbon nanomaterials in catalysis, a subject that is currently intensively studied. The availability of carbon nanotubes since the 1990's and of graphene ten years later prompted the development of novel nanotechnologies. We review this topic linking fundamental surface science to the field of catalysis giving a timely picture of the state of the art. The main scientific questions that material scientists have addressed in the last decades are described, in particular the enduring debate on the role of the different nitrogen functionalities in the catalytic activity of nitrogen-doped carbon nanotubes and graphene.

Highly Active and Durable Core-Shell fct-PdFe@Pd Nanoparticles Encapsulated NG as an Efficient Catalyst for Oxygen Reduction Reaction

Development of highly active and durable catalysts for oxygen reduction reaction (ORR) alternative to Pt-based catalyst is an essential topic of interest in the research community but a challenging task. Here, we have developed a new type of face-centered tetragonal (fct) PdFe-alloy nanoparticle-encapsulated Pd (fct-PdFe@Pd) anchored onto nitrogen-doped graphene (NG). This core-shell fct-PdFe@Pd@NG hybrid is fabricated by a facile and cost-effective technique. The effect of temperature on the transformation of face-centered cubic (fcc) to fct structure and their effect on ORR activity are systematically investigated. The core-shell fct-PdFe@Pd@NG hybrid exerts high synergistic interaction between fct-PdFe@Pd NPs and NG shell, beneficial to enhance the catalytic ORR activity and excellent durability. Impressively, core-shell fct-PdFe@Pd@NG hybrid exhibits an excellent catalytic activity for ORR with an onset potential of ∼0.97 V and a half-wave potential of ∼0.83 V versus relative hydrogen electrode, ultrahigh current density, and decent durability after 10 000 potential cycles, which is significantly higher than that of marketable Pt/C catalyst. Furthermore, the core-shell fct-PdFe@Pd@NG hybrid also shows excellent tolerance to methanol, unlike the commercial Pt/C catalyst. Thus, these findings open a new protocol for fabricating another core-shell hybrid by facile and cost-effective techniques, emphasizing great prospect in next-generation energy conversion and storage applications.

Manganese deception on graphene and implications in catalysis

Heteroatom-doped metal-free graphene has been widely studied as the catalyst for the oxygen reduction reaction (ORR). Depending on the preparation method and the dopants, the ORR activity varies ranging from a two-electron to a four-electron pathway. The different literature reports are difficult to correlate due to the large variances. However, due to the potential metal contamination, the origin of the ORR activity from "metal-free" graphene remains confusing and inconclusive. Here we decipher the ORR catalytic activities of diverse architectures on graphene derived from reduced graphene oxide. High angle annular dark field scanning transmission electron microscopy, X-ray absorption near edge structure, extended X-ray absorption fine structure, and trace elemental analysis methods are employed. The mechanistic origin of ORR activity is associated with the trace manganese content and reaches its highest performance at an onset potential of 0.94 V when manganese exists as a mononuclear-centered structure within defective graphene. This study exposes the deceptive role of trace metal in formerly thought to be metal-free graphene materials. It also provides insight into the design of better-performing catalyst for ORR by underscoring the coordination chemistry possible for future single-atom catalyst materials.

Rates of H2O2 Electrogeneration by Reduction of Anodic O2 at RVC Foam Cathodes in Batch and Flow-through Cells

The Electro-Fenton process for in-situ H₂O₂ electrogeneration is impacted by low O₂ utilization efficiency (<0.1%) and the need of acid for pH adjustment. An electrochemical flow-through cell can develop localized acidic conditions, coupled with simultaneous formation and utilization of O₂ to enhance H₂O₂ formation. Multiple electrode configurations using reticulated vitreous carbon (RVC) foam and Ti/mixed metal oxides (MMO) are proposed to identify the optimum conditions for H₂O₂ formation in batch and flow-through cells. A pH of 2.75±0.25 is developed locally in the flow-through cell that supports effective O₂ reduction. Up to 9.66 mg/L H₂O₂ is generated in a 180 mL batch cell under 100 mA, at pH 2, and mixing at 350 rpm. In flow-through conditions, both flow rate and current significantly influence H₂O₂ production. A current of 120 mA produced 2.27 mg/L H₂O₂ under a flow rate of 3 mL/min in a 3-electrode cell with one RVC foam cathode at 60 min. The low current of 60 mA does not enable effective H₂O₂ production, while the high current of 250 mA produced less H₂O₂ due to parasitic reactions competing with O₂ reduction. Higher flow rates decrease the retention time, but also increase the O₂ mass transfer. Furthermore, 3-electrode flow-through cell with two RVC foam cathodes was not effective for H₂O₂ production due to the limited O₂ supply for the secondary cathode. Finally, a coupled process that uses both O₂ and H₂ from water electrolysis is proposed to improve the H₂O₂ yield further.

Enhanced electrocatalytic activity of nitrogen-doped olympicene/graphene hybrids for the oxygen reduction reaction

Developing inexpensive and non-precious metal electrocatalysts for the oxygen reduction reaction (ORR) is among the major goals in fuel cells. Herein, by using density-functional theory calculations, we show that N-doped olympicene/graphene hybrids exhibit unexpectedly high ORR catalytic activity-even comparable to that of the Pt(111) surface. Both graphitic-type and pyridine-type N-doped olympicene/graphene hybrids are highly active for the ORR and have good CO tolerance. The formation of the second H2O molecule is the rate-determining step for the ORR with the graphitic-type hybrid, whereas on the pyridine-type hybrid, it is the formation of OOH. Note that N-doped olympicene/graphene hybrid materials combine the high reactivity of olympicene and the high electrical conductivity of graphene, which allows them to be potentially used as low-cost and non-precious-metal ORR catalysts.

Probing the effect of different graphitic nitrogen sites on the aerobic oxidation of thiols to disulfides: a DFT study

Functionalized graphene materials are well known for their application in catalyzing the aerobic oxidation of alcohols, hydrocarbons, etc. in an aqueous medium. Despite the fact that a few catalysts are known to oxidize thiols to disulfides, their selectivity is poor and requires oxidants that are not suitable in terms of the principles of green chemistry. Therefore, in this context, an attempt has been made to investigate the possibility of utilizing nitrogen doped graphene for the aerobic oxidation of thiols to disulfides using density functional theory (DFT). Our previous study (V. S. Jeyaraj, M. Kamaraj and V. Subramanian, J. Phys. Chem. C, 2015, 119, 26438-26450) has shed light on the activation of dioxygen to form activated oxygen species (AOS) at different graphitic nitrogen sites. Hence the same has been used to study the two-electron oxidation of thiophenol and methanethiol. The AOS are of three kinds: (1) peroxide type at the edges, (2) superoxide type at the center and (3) ketonic type at edges. The findings from this study indicate that the peroxide type AOS leads to selective formation of diphenyl disulfide, whereas the superoxide type at the center facilitates the formation of hydrogen peroxide which could lead to over-oxidation of disulfide. The oxidation of aromatic thiols (thiophenol) by the ketonic type of AOS is nearly a barrier-less reaction (0.67 kcal mol^-1). Similarly, AOS at the edges with the peroxide form can oxidize aliphatic thiols (methanethiol) with a less barrier of 1.55 kcal mol^-1, which can be a spontaneous reaction. The mechanism of oxidation is completely different from the oxidative pathway of alcohols by the same AOS. The formation of S-OH species is strictly avoided by the strong stabilization of thiyl radicals over the π-surface of graphene.

Theoretical and experimental evidence for rGO-4-PP Nc as a metal-free Fenton-like catalyst by tuning the electron distribution

The application of the classical Fenton reaction has long been limited by several problems, such as metallic sludge and narrow pH range, which derived from the metal components in the catalyst. Developing a metal-free Fenton catalyst may efficiently address these problems. Here, we firstly perform a density functional theory (DFT) study to explore the possibility of developing the 4-phenoxyphenol molecule-doped reduced graphene oxide nanocomposite (rGO-4-PP Nc) as a metal-free Fenton-like catalyst by tuning the electron distribution. The theoretical calculation results reveal that rGO-4-PP Nc can act as an efficient Fenton-like catalyst for H2O2 activation and pollutant degradation through formation of electron-rich O and electron-deficient C centers on the C-O-C bridge. The actual rGO-4-PP Nc is also prepared via a surface complexation and copolymerization process. The experimental evidence, such as that gained from XRD, FIIR and EPR analysis, confirm the theoretical models and the dual-reaction-center Fenton-like mechanism. This work provides a basis for theoretical calculation to guide the actual synthesis and prediction of catalytic activity of the Fenton-like catalysts, and also offers a creative perspective to develop new generation metal-free Fenton catalysts by tuning the electron distribution using organic polymers.

Size effect of oxygen reduction reaction on nitrogen-doped graphene quantum dots

The adsorption strength of ORR intermediates, the reaction free energy of rate-determining step, and the overpotential increase with the increase of the size of N-doped graphene quantum dots.