Multifunctional mesoporous bioactive glasses for effective delivery of therapeutic ions and drug/growth factors

Biomaterial based treatment of osteoclastic/osteoblastic cell imbalance - Gelatin-modified calcium/strontium phosphates

Osteoporotic bone represents - particularly in case of fractures - difficult conditions for its regeneration. In the present study, the focus was put on a degradable bone substitute material of gelatin-modified calcium and strontium phosphates facing the special demands of osteoporotic bone. The release of strontium ions from the material ought to stimulate osteoblastogenesis either direct by ion release or indirect after material resorption by increased presence and activity of osteoclasts, which subsequently stimulate osteoblasts. A new porous material was produced from calcium phosphate, strontium phosphate and a mixed phase of calcium/strontium phosphate precipitated in presence of gelatin. Initially, ion release was analyzed in standard‑calcium containing (2.0 mM) and low-calcium (0.4 mM) minimum essential medium. The cultivation of human peripheral blood mononuclear cells next to the material led to formation of osteoclast-like cells, able to migrate, fuse, and differentiate. Especially, the mixed gelatin-modified calcium/strontium phosphate allowed osteoclastogenesis as proven morphologically and by real-time quantitative polymerase chain reaction (RT-qPCR). It was precisely this material that led to the best osteoblastic reaction of human bone marrow stromal cells cultured on the material. The investigations of the bone substitute material indicate active involvement in the balance of cells of the bone morphogenetic unit.

Mesoporous bioactive glass/ɛ-polycaprolactone scaffolds promote bone regeneration in osteoporotic sheep

Macroporous scaffolds made of a SiO2-CaO-P2O5 mesoporous bioactive glass (MBG) and ɛ-polycaprolactone (PCL) have been prepared by robocasting. These scaffolds showed an excellent in vitro biocompatibility in contact with osteoblast like cells (Saos 2) and osteoclasts derived from RAW 264.7 macrophages. In vivo studies were carried out by implantation into cavitary defects drilled in osteoporotic sheep. The scaffolds evidenced excellent bone regeneration properties, promoting new bone formation at both the peripheral and the inner parts of the scaffolds, thick trabeculae, high vascularization and high presence of osteoblasts and osteoclasts. In order to evaluate the effects of the local release of an antiosteoporotic drug, 1% (%wt) of zoledronic acid was incorporated to the scaffolds. The scaffolds loaded with zoledronic acid induced apoptosis in Saos 2 cells, impeded osteoclast differentiation in a time dependent manner and inhibited bone healing, promoting an intense inflammatory response in osteoporotic sheep. STATEMENT OF SIGNIFICANCE: In addition to an increase in bone fragility and susceptibility to fracture, osteoporosis also hinders the clinical success of endosseous implants and grafting materials for the treatment of bone defects. For the first time, macroporous scaffolds made of mesoporous bioactive glass and ε-caprolactone have been evaluated in a sheep model that mimics the osteoporosis conditions in humans. These implants fostered bone regeneration, promoting new bone formation at both the peripheral and the inner parts of the scaffolds, showing thick trabeculae and a high vascularization degree. Our results indicate that macroporous structures containing highly bioactive mesoporous glasses could be excellent candidates for the regenerative treatment of bone defects in osteoporotic patients.

Enhanced Capability of Bone Morphogenetic Protein 2-loaded Mesoporous Calcium Silicate Scaffolds to Induce Odontogenic Differentiation of Human Dental Pulp Cells

INTRODUCTION

Calcium silicate bioceramics have been broadly used as reparative or grafting materials with good bioactivity and biocompatibility in dental application. It has been shown that applying a mesoporous process to calcium silicate gives it great potential as a controlled drug delivery system.

METHODS

The aim of this study was to investigate a novel osteoinductive scaffold by loading bone morphogenetic protein 2 (BMP-2) to mesoporous calcium silicate (MesoCS) and fabricating it as 3-dimensional scaffolds using fused deposition modeling combined with polycaprolactone.

RESULTS

The MesoCS/BMP-2 scaffold showed similar patterns to that of a calcium silicate scaffold in releasing calcium and silicon ions in a simulated body fluid (SBF) immersion test for 7 days, but BMP-2 continued releasing from the MesoCS/BMP-2 scaffold significantly more than the CS scaffold from 48 hours to 7 days. Adhesion and proliferation of human dental pulp cells cultured on a MesoCS/BMP-2 scaffold were also more significant than scaffolds without BMP-2 or mesoporous as well as the results of the test on alkaline phosphatase activity.

CONCLUSIONS

The results support that the novel 3-dimensional-printed MesoCS scaffold performed well as BMP-2 delivery system and would be an ideal odontoinductive biomaterial in regenerative endodontics.

Using Bioactive Glasses in the Management of Burns

The management of burn injuries is considered an unmet clinical need and, to date, no fully satisfactory solution exists to this problem. This mini-review aims to explore the potential of bioactive glasses (BGs) for burn care due to the therapeutic effects of their ionic dissolution products. BGs have been studied for more than 40 years and boast a long successful history in the substitution of damaged tissues, especially bone. Considering their exceptional versatility and attractive characteristics, these synthetic materials have also recently been proposed in the treatment of soft tissue-related disorders such as skin wounds. Specifically, improving fibroblast proliferation, inducing angiogenesis, and eliciting antibacterial activity (with the additional advantage of avoiding administration of antibiotics) are all considered as key added values carried by BGs in the treatment of burn injuries. However, some issues deserve careful consideration while proceeding with the research, including the selection of suitable BG compositions, appropriate forms of application (e.g., BG fibers, ointments or composite patches), as well as the procedures for reliable in vivo testing.

Fabrication of biocomposite scaffolds made with modified hydroxyapatite inclusion of chitosan-grafted-poly(methyl methacrylate) for bone tissue engineering

In the present study, composite scaffolds of chitosan-graft-poly(methyl methacrylate) (Chi-g-PMMA) and mineral ions-loaded hydroxyapatite (mHA) (obtained by the hydrothermal treatment of hydroxyapatite (HA) in a simulated body fluid (SBF) solution (mHA@Chi-g-PMMA)) were prepared by the blending method. The physical properties, bioactivity, biological properties and their capabilities for sustained drug and protein release were studied. Physicochemical analysis showed a successful incorporation of the mineral ions in the HA particles and a good distribution of the mHA within the Chi-g-PMMA polymer matrix. The compressive strength and the Young's modulus were 15.760 ± 0.718 and 658.452 ± 17.020 MPa, respectively. In bioactivity studies, more apatite formation on the surface were seen after immersion in the SBF solution. In vitro growth experiments using UMR-106 osteoblast-like cells on the mHA@Chi-g-PMMA scaffold case showed that the attachment, viability and proliferation of the cells on the scaffolds had improved after 7 d of immersion. The in vitro release of two compounds (the cancer drug, doxorubicin (DOX)) and bovine serum albumin (BSA)), which had been attached to separate mHA@Chi-g-PMMA scaffolds, were studied to determine their suitability as drug delivery vehicles. It was found that the sustained release of DOX was 73.95% and of BSA was 57.27% after 25 h of incubation. These experimental results demonstrated that the mHA@Chi-g-PMMA composite can be utilized as a scaffold for bone cells ingrowth and also be used for drug delivery during the bone repairing.

Development and Characterization of Bioactive Glass Containing Composite Coatings with Ion Releasing Function for Antibiotic-Free Antibacterial Surgical Sutures

Resorbable (Vicryl® Plus) sutures were coated with zinc-doped glass (Zn-BG) and silver-doped ordered mesoporous bioactive glass (Ag-MBG) particles by a dip coating technique. A multilayer approach was used to achieve robust coatings. The first coating was a polymeric layer (e.g., PCL or chitosan) and the second one was a composite made of BG particles in a polymer matrix. The coatings were characterized in terms of morphology by scanning electron microscopy (SEM), in vitro bioactivity, and antibacterial properties. Chitosan/Ag-MBG coatings showed the ability to form hydroxyl-carbonate-apatite on their surfaces after immersion in SBF. An antibacterial effect against Gram (+) and Gram (-) bacteria was confirmed, highlighting the potential application of the coated sutures for antibiotic-free approaches.

The effect of tantalum incorporation on the physical and chemical properties of ternary silicon-calcium-phosphorous mesoporous bioactive glasses

Synthesis and characterization of the first mesoporous bioactive glasses (MBGs) containing tantalum are reported here, along with their potential application as hemostats. Silica MBGs were synthesized using with the molar composition of (80-x)% Si, 15% Ca, 5% P, and x% Ta. It was found that incorporation of >1 mol % Ta into the MBGs changes their physical and chemical properties. Increasing Ta content from 0 to 10 mol % causes a decrease in the surface area and pore volume of ~20 and ~35%, respectively. This is due to the increase in nonbridging oxygens and mismatch of thermal expansion coefficient which created discontinuities in the ordered channel structure. However, the effect is not significant on the amount of ions (Si, Ca, P, and Ta) released, from the sample into deionized water, for short durations (<60 min). In a mouse tail-cut model, a significant decrease in bleeding time (≥50% of average bleeding time) was found for Ta-MBGs compared to having no treatment, Arista, and MBG without Ta. Further studies are proposed to determine the mechanism of Ta involvement with the hemostatic process. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2229-2237, 2019.

Dual-ion delivery for synergistic angiogenesis and bactericidal capacity with silica-based microsphere

Inhibition of bacterial growth with the simultaneous promotion of angiogenesis has been challenging in the repair and regeneration of infected tissues. Here, we aim to tackle this issue through the use of cobalt-doped silicate microspheres that can sustainably release dual ions (silicate and cobalt) at therapeutically-relevant doses. The cobalt was doped up to 2.5 wt% within a sol-gel silicate glass network, and microspheres with the size of ∼300 μm were generated by an emulsification method. The cobalt and silicate ions released were shown to synergistically upregulate key angiogenic genes, such as HIF1-α, VEGF and the receptor KDR. Moreover, the incorporation of ions promoted the polarization, migration, homing and sprouting angiogenesis of endothelial cells. Neo-vascular formation was significantly higher in the dual-ion delivered microspheres, as evidenced in a chicken chorioallantoic membrane model. When cultured with bacterial species, the cobalt-doped microspheres effectively inhibited bacteria growth in both indirect or direct contacts. Of note, the bacteria/endothelial cell coculture model proved the efficacy of dual-ion releasing microcarriers for maintaining the endothelial survivability against bacterial contamination and their cell-cell junction. The current study demonstrates the multiple actions (proangiogenic and antibacterial) of silicate and cobalt ions released from microspheres, and the concept provided here can be extensively applied to repair and regenerate infected tissues as a growth factor- or drug-free delivery system. STATEMENT OF SIGNIFICANCE: While several ions have been introduced to biomaterials for therapeutic purposes, relaying the effects of antibacterial into tissue regenerative (e.g., angiogenesis) has been a significant challenge. In this study, we aim to develop a biomaterial platform that has the capacity of both 'antibacterial' and 'proangiogenic' from a microsphere sustainably releasing multiple ions (herein cobalt and silicate). Here, dual-actions of the microspheres revealed the stimulated endothelial functions as well as the inhibited growth of different bacterial species. In particular, protecting endothelial survivability against bacterial contamination was reported using the bacterial/endothelial co-culture model. The current concept of drug-free yet multiple-ion delivery biomaterials can be applicable for the repair and regeneration of infected tissues with dual actions of angiogenesis and suppressing bacterial activity.

Study on MgxSr3-x(PO4)2 bioceramics as potential bone grafts

Magnesium (Mg) and strontium (Sr), which are essential nutrient elements in the natural bone, positively affect the osteogenic activity even in wide ranges of ion concentrations. However, it remains unknown whether magnesium-strontium phosphates [Mg_xSr_3-x(PO₄)₂] are potential bone grafts for accelerating bone regeneration. Herein, a serial of Mg_xSr_3-x(PO₄)₂, including Mg₃(PO₄)₂, Mg₂Sr(PO₄)₂, Mg_1.5Sr_1.5(PO₄)₂, MgSr₂(PO₄)₂ and Sr₃(PO₄)₂, were synthesized using a solid-state reaction approach. The physicochemical properties and cell behaviors of Mg_xSr_3-x(PO₄)₂ bioceramics were characterized and compared with the common bone graft β-tricalcium phosphate (β-TCP). The results indicated that various Mg_xSr_3-x(PO₄)₂ bioceramics differed in compressive strength and in vitro degradation rate. All the Mg_xSr_3-x(PO₄)₂ bioceramics had excellent biocompatibility. In contrast to β-TCP, the Mg_xSr_3-x(PO₄)₂ enhanced alkaline phosphatase activity of mouse bone mesenchymal stem cells (mBMSCs), and inhibited osteoclastogenesis-related gene expression of RAW264.7 cells, but did not enhance osteogenesis-related gene expression of mBMSCs which were treated with osteogenesis induction supplements. However, Mg₃(PO₄)₂ stimulated osteogenesis-related gene expression of mBMSCs without the treatment of osteogenesis induction supplements. This work contributes to the design of bone graft and may open a new avenue for the bone regeneration field.

Design and Evaluation of Europium Containing Mesoporous Bioactive Glass Nanospheres: Doxorubicin Release Kinetics and Inhibitory Effect on Osteosarcoma MG 63 Cells

Functional ions and drug factors play a vital role in stimulating bone tissue regeneration as we understand it. In this work, europium-containing mesoporous bioactive glass nanospheres (Eu/MBGs), composed of 60% SiO₂-(36⁻x)%CaO-x%Eu₂O₃-4%P₂O₅ (x = 0, 0.5, 1, 2 mol%), were prepared by a facile sol-gel process. The results indicate that Eu ions play an important role to influence the microstructure of MBGs, in which a suitable concentration of Eu (1 mol%) increases their surface area (502 m²/g) as well as their pore volume (0.34 cm³/g). Proper doping of Eu ions in MBGs can observably induce apatite mineralization and improve the doxorubicin (DOX) release behavior. Furthermore, DOX-loaded Eu/MBGs could maintain a long-term inhibitory effect on the viability of osteosarcoma MG 63 cells. This work has demonstrated that it is possible to develop functional Eu/MBGs by combining excellent apatite-mineralization ability, controllable drug (DOX) release and antitumor functions for the therapy of bone tissue regeneration.

In vitro performance of a nanobiocomposite scaffold containing boron-modified bioactive glass nanoparticles for dentin regeneration

Every year, many dental restoration methods are carried out in the world and most of them do not succeed. High cost of these restorations and rejection possibility of the implants are main drawbacks. For this reason, a regenerative approach for repairing the damaged dentin-pulp complex or generating a new tissue is needed. In this study, the potential of three-dimensional cellulose acetate/oxidized pullulan/gelatin-based dentin-like constructs containing 10 or 20% bioactive glass nanoparticles was studied to explore their potential for dentin regeneration. Three-dimensional nano biocomposite structures were prepared by freeze-drying/metal mold pressing methods and characterized by in vitro degradation analysis, water absorption capacity and porosity measurements, scanning electron microscopy, in vitro biomineralization analysis. During one-month incubation in phosphate buffered saline solution at 37°C, scaffolds lost about 25-30% of their weight and water absorption capacity gradually decreased with time. Scanning electron microscopy examinations showed that mean diameter of the tubular structures was about 420 µm and the distance between walls of the tubules was around 560 µm. Calcium phosphate precipitates were formed on scaffolds surfaces treated with simulated body fluid, which was enhanced by boron-modified bioactive glass addition. For cell culture studies human dental pulp stem cells were isolated from patient teeth. An improvement in cellular viability was observed for different groups over the incubation period with the highest human dental pulp stem cells viability on B7-20 scaffolds. ICP-OES analysis revealed that concentration of boron ion released from the scaffolds was between 0.2 and 1.1 mM, which was below toxic levels. Alkaline phosphatase activity and intracellular calcium amounts significantly increased 14 days after incubation with highest values in B14-10 group. Von Kossa staining revealed higher levels of mineral deposition in these groups. In this work, results indicated that developed dentin-like constructs are promising for dentin regeneration owing to presence of boron-modified bioactive glass nanoparticles.

Mesoporous bioactive glasses: Promising platforms for antibacterial strategies

The control of bacterial infections is of particular importance in the field of tissue engineering. Recently, much attention has been addressed toward the use of mesoporous bioactive glasses (MBGs) for antibacterial strategies, primarily because of their capability of acting as carriers for the local release of antimicrobial agents. The incorporation of antibacterial metallic ions including silver (Ag⁺), zinc (Zn²⁺), copper (Cu⁺ and Cu²⁺), cerium (Ce³⁺ and Ce⁴⁺), and gallium (Ga³⁺) cations into the MBG structure and their controlled release is proposed as one of the most attractive strategies for inhibiting bacterial growth and reproduction. Moreover, the possibility of loading and delivering various antibacterial biomolecules (e.g., antibiotics) through the porous structure of MBGs makes them as ideal candidates for antibacterial applications. In this review, we aim to present a comprehensive evaluation of MBG potential regarding antibacterial activities. For this purpose, different types of antibacterial ion-doped and drug-loaded MBGs are introduced and discussed in the light of existing knowledge, along with the significant challenges ahead. STATEMENT OF SIGNIFICANCE: Prevention and treatment of infections is one of the today's greatest challenges in medical sciences, also considering the well-known issues related to increased bacterial resistance to antibiotics. The advent of mesoporous glasses led to the birth of a new class of multifunctional biomaterials acting as bioactive platforms for the local release of organic or inorganic agents eliciting an antimicrobial effect. This reviews summarizes the state of the art of MBGs in this field, highlighting the latest evolutions and the specific role played by metallic antimicrobial ions that can be incorporated in the glass composition and then properly released. Perspective for tissue engineering applications are also discussed to provide an up-to-date contribution that is useful to both experienced scientists and early-stage researchers.

Mesoporous bioactive glass-polyurethane nanocomposites as reservoirs for sustained drug delivery

The materials capable of sustained drug release are highly desired in the biomedical field, and for this purpose, mesoporous bioactive glass (MBG) and polyurethanes (PUs) are being used along with various other materials. However, MBG is highly brittle and PUs suffer from the lower tensile strength value. Therefore, to overcome these shortcomings, bioactive nanocomposites were designed and fabricated by using MBG and biodegradable PUs. MBG with variable percentages was used as filler in arginine and starch-based PU matrices. The structural, mechanical and physicochemical properties were evaluated by fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), stress-strain curves and MTT assay. All the nanocomposites exhibited high cell viability (96-100%) and are therefore designated as biocompatible. The young's modulus is in the range of 0.5-0.8 MPa, which perfectly matches with that of cancellous bones. The nanocomposites were further studied for sustained drug delivery of an anti-cancer drug, imatinib. There was no burst effect and 52-84% of the drug was released over a period of three weeks. Consequently, these nanocomposites behaved as reservoirs for sustained drug release and can be applied for reducing the dose frequency where required.

Structural, physico-mechanical and in-vitro bioactivity studies on SiO2-CaO-P2O5-SrO-Al2O3 bioactive glasses

Strontium based bioactive glasses have shown a better biocompatibility than calcia based bioactive glasses. In this report, we have shown that the bioactivity is found to be even more when we incorporate Al₂O₃ upto 1.5 mol% in SiO₂-CaO-P₂O₅-SrO bioactive glass. We have studied the structural, physico-mechanical and bioactive properties in these glasses with varying alumina concentration from 0.5 to 2.5 mol%. The bioactivity of the glasses is evaluated by in vitro test in simulated body fluid (SBF). The formation of hydroxy carbonated apatite layer (HCA) on the surface of glasses after immersion in SBF is identified by the XRD, FTIR and SEM. The substitution of Al₂O₃ for SrO in these glasses demonstrates a significant enhancement in compressive strength and elastic modulus. However cytotoxicity and cell viability assessed using human osteosarcoma U2-OS cell lines show the growth of the cells without causing any significant loss of viability and cell death upto 1.5 mol% addition of Al₂O₃. Osteosarcoma cells grow on the surface of bioglasses which make them biocompatible and fit for use in clinical trials.

Production and Physicochemical Characterization of Cu-Doped Silicate Bioceramic Scaffolds

Development of ion-releasing implantable biomaterials is a valuable approach for advanced medical therapies. In the effort of tackling this challenge, we explored the feasibility of porous bioceramic scaffolds releasing copper ions, which are potentially able to elicit angiogenetic and antibacterial effects. First, small amounts of CuO were incorporated in the base silicate glass during melting and the obtained powders were further processed to fabricate glass–ceramic scaffolds by sponge replica method followed by sinter crystallization. As the release of copper ions from these foams in simulated body fluid (SBF) was very limited, a second processing strategy was developed. Silicate glass–ceramic scaffolds were coated with a layer of Cu-doped mesoporous glass, which exhibited favorable textural properties (ultrahigh specific surface area >200 m²/g, mesopore size about 5 nm) for modulating the release of copper. All the produced scaffolds, containing biocompatible crystals of wollastonite (CaSiO₃), revealed high stability in a biological environment. Furthermore, the materials had adequate compressive strength (>10 MPa) for allowing safe manipulation during surgery. Overall, the results achieved in the present work suggest that these Cu-doped glass-derived scaffolds show promise for biomedical application and motivate further investigation of their suitability from a biological viewpoint.

Enhanced cellular osteogenic differentiation on Zn-containing bioglass incorporated TiO2 nanorod films

Surface nanotopography and bioactive ions have been considered to play critical roles on the interactions of biomaterials with cells. In this study, a TiO₂ nanorod film incorporated with Zn-containing bioactive glass (TiO₂/Zn-BG) was prepared on tantalum substrate, trying to evaluate the synergistic effects of nanotopograpgy and bioactive ions to promote cellular osteogenic differentiation activity. The expression of osteogenic-related genes, ALP as well as the ECM mineralization on TiO₂/Zn-BG film were significantly upregulated compared to that of the film without TiO₂ nanorod nanostructure (Zn-BG) or without Zn (TiO₂/BG). Moreover, a much low Zn²⁺ release level on TiO₂/Zn-BG film was beneficial to promote the osteogenesis, which could be ascribed to that a semi-closed space established by TiO₂ nanorods with adhered cells provided an appropriate micro-environment that facilitated Zn²⁺ adsorption.

The response of pre-osteoblasts and osteoclasts to gallium containing mesoporous bioactive glasses

Mesoporous bioactive glasses (MBGs) in the system SiO₂-CaO-P₂O₅-Ga₂O₃ have been synthesized by the evaporation induced self-assembly method and subsequent impregnation with Ga cations. Two different compositions have been prepared and the local environment of Ga(III) has been characterized using ²⁹Si, ⁷¹Ga and ³¹P NMR analysis, demonstrating that Ga(III) is efficiently incorporated as both, network former (GaO₄ units) and network modifier (GaO₆ units). In vitro bioactivity tests evidenced that Ga-containing MBGs retain their capability for nucleation and growth of an apatite-like layer in contact with a simulated body fluid with ion concentrations nearly equal to those of human blood plasma. Finally, in vitro cell culture tests evidenced that Ga incorporation results in a selective effect on osteoblasts and osteoclasts. Indeed, the presence of this element enhances the early differentiation towards osteoblast phenotype while disturbing osteoclastogenesis. Considering these results, Ga-doped MBGs might be proposed as bone substitutes, especially in osteoporosis scenarios.

STATEMENT OF SIGNIFCANCE

Osteoporosis is the most prevalent bone disease affecting millions of patients every year. However, there is a lack of bone grafts specifically designed for the treatment of bone defects occurred because of osteoporotic fractures. The consequence is that osteoporotic bone defects are commonly treated with the same biomaterials intended for high quality bone tissue. In this work we have prepared mesoporous bioactive glasses doped with gallium, demonstrating osteoinductive capability by promoting the differentiation of pre-osteoblast toward osteoblasts and partial inhibition of osteoclastogenesis. Through a deep study of the local environment of gallium within the mesoporous matrix, this work shows that gallium release is not required to produce this effect on osteoblasts and osteoclasts. In this sense, the presence of this element at the surface of the mesoporous bioactive glasses would be enough to locally promote bone formation while reducing bone resorption.

Dual-Functional Dendritic Mesoporous Bioactive Glass Nanospheres for Calcium Influx-Mediated Specific Tumor Suppression and Controlled Drug Delivery in Vivo

The development of nanomaterials for stable, controlled delivery of drugs and efficient suppression of tumor growth with desirable biosafety remains challenging in the nano-biomedical field. In this study, we prepared and optimized mesoporous bioactive glass (MBG) nanospheres to establish a functional drug delivery system and analyzed the effect of the dendritic mesoporous structure on drug loading and release. We then utilized an in vitro model to examine the biological effects of dendritic MBG nanospheres on normal and tumor cells and studied the molecular mechanism underlying specific tumor suppression by MBG nanospheres. Finally, we investigated the combinational effect of MBG nanospheres and a cancer therapeutic drug with an in vivo tumor xenograft model. Our results show that the dendritic MBG nanospheres have been successfully synthesized by optimizing calcium: silicon ratio. MBG nanospheres exhibit a dendritic mesoporous structure with a large specific surface area, demonstrate high drug loading efficiency, and release drugs in a controlled fashion to effectively prolong drug half-life. Ca²⁺ in nanospheres activates transient receptor potential channels and calcium-sensing receptor on tumor cells, mediates calcium influx, and directly regulates the calpain-1-Bcl-2-caspase-3 signaling pathway to specifically suppress tumor growth without affecting normal cells. In addition, dendritic MBG nanospheres synergize with cancer drugs to improve antitumor efficacy and reduce systemic toxicity. Dendritic MBG nanospheres with antitumor activity and controlled drug release have been successfully achieved and the underlying molecular mechanism was elucidated, paving the way for translational application.

Angiogenesis and Full-Thickness Wound Healing Efficiency of a Copper-Doped Borate Bioactive Glass/Poly(lactic- co-glycolic acid) Dressing Loaded with Vitamin E in Vivo and in Vitro

There is an urgent demand for wound healing biomaterials because of the increasing frequency of traffic accidents, industrial contingencies, and natural disasters. Borate bioactive glass has potential applications in bone tissue engineering and wound healing; however, its uncontrolled release runs a high risk of rapid degradation and transient biotoxicity. In this study, a novel organic-inorganic dressing of copper-doped borate bioactive glass/poly(lactic- co-glycolic acid) loaded with vitamin E (0-3.0 wt % vitamin E) was fabricated to evaluate its efficiency for angiogenesis in cells and full-thickness skin wounds healing in rodents. In vitro results showed the dressing was an ideal interface for the organic-inorganic mixture and a controlled release system for Cu²⁺ and vitamin E. Cell culture suggested the ionic dissolution product of the copper-doped and vitamin E-loaded dressing showed the best migration, tubule formation, and vascular endothelial growth factor (VEGF) secretion in human umbilical vein endothelial cells (HUVECs) and higher expression levels of angiogenesis-related genes in fibroblasts in vitro. Furthermore, this dressing also suggested a significant improvement in the epithelialization of wound closure and an obvious enhancement in vessel sprouting and collagen remodeling in vivo. These results indicate that the copper-doped borate bioactive glass/poly(lactic- co-glycolic acid) dressing loaded with vitamin E is effective in stimulating angiogenesis and healing full-thickness skin defects and is a promising wound dressing in the reconstruction of full-thickness skin injury.

Highly dispersed lithium doped mesoporous silica nanospheres regulating adhesion, proliferation, morphology, ALP activity and osteogenesis related gene expressions of BMSCs

Lithium (Li) doped mesoporous silica nanospheres (LMSNs) were synthesized by incorporation of 5 wt% Li into mesoporous silica nanospheres (MSNs) using sol-gel method. The results showed that LMSNs with a mean size of approximate 300 nm exhibited uniform and highly dispersed spherical morphology, which was similar to the morphology of MSNs. Moreover, the degradability of MSNs was significantly increased after the incorporation of Li, and LMSNs could release both silicon (Si) and Li ions in a sustained manner. Due to the release of Li ions, LMSNs showed higher stimulatory effects on the attachment and proliferation of bone marrow mesenchymal stem cells (BMSCs) than MSNs. In addition, LMSNs could also enhance the ALP activity of BMSCs as well as improving osteogenesis related genes (OPN, ALP, Runx2 and OCN) expression of BMSCs. In summary, LMSNs have shown the capability of being a carrier of biologically active ions, which exhibit great potential in bone repair/regeneration applications.

Promoting in vivo early angiogenesis with sub-micrometer strontium-contained bioactive microspheres through modulating macrophage phenotypes

Early vascularization capacity of biomaterials plays an essential role in efficient wound healing and tissue regeneration, especially in large tissue tension implanting position such as bone augmentation. Strontium-contained silica-based bioactive materials have shown the role of promoting angiogenesis by stimulating osteoblasts to secrete angiogenesis related cytokines. However, osteoblasts have little effect on early angiogenesis due to the inflammatory reaction of implantation site. Here, for the first time, we found that the monodispersed strontium-contained bioactive glasses microspheres (SrBGM) could significantly promote the early angiogenesis through regulating macrophage phenotypes. After being stimulated with SrBGM in vitro, RAW cells (macrophages) presented a trend towards to M2 phenotype and expressed high level of platelet-derived growth factor-BB (PDGF-BB). Moreover, the RAW conditioned medium of SrBGM significantly enhanced the angiogenic capacity of HUVECs. The in vivo early vascularization studies showed that significant new vessels were observed at the center of SrBGM-based scaffolds after implantation for 1 week in a bone defect model of rats, suggesting their enhanced early vascularization. Due to the efficient vascularization, the in vivo new bone formation was promoted significantly. Our study may provide a novel strategy to promote the early vascularization of biomaterials through modulating the microphage phenotypes, which has wide applications in various tissue regeneration and wound healing.

Effects of a mesoporous bioactive glass on osteoblasts, osteoclasts and macrophages

A mesoporous bioactive glass (MBG) of molar composition 75SiO₂-20CaO-5P₂O₅ (MBG-75S) has been synthetized as a potential bioceramic for bone regeneration purposes. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption studies and transmission electron microscopy (TEM) demonstrated that MBG-75S possess a highly ordered mesoporous structure with high surface area and porosity, which would explain the high ionic exchange rate (mainly calcium and silicon soluble species) with the surrounded media. MBG-75S showed high biocompatibility in contact with Saos-2 osteoblast-like cells. Concentrations up to 1 mg/ml did not lead to significant alterations on either morphology or cell cycle. Regarding the effects on osteoclasts, MBG-75S allowed the differentiation of RAW-264.7 macrophages into osteoclast-like cells but exhibiting a decreased resorptive activity. These results point out that MBG-75S does not inhibit osteoclastogenesis but reduces the osteoclast bone-resorbing capability. Finally, in vitro studies focused on the innate immune response, evidenced that MBG-75S allows the proliferation of macrophages without inducing their polarization towards the M1 pro-inflammatory phenotype. This in vitro behavior is indicative that MBG-75S would just induce the required innate immune response without further inflammatory complications under in vivo conditions. The overall behavior respect to osteoblasts, osteoclasts and macrophages, makes this MBG a very interesting candidate for bone grafting applications in osteoporotic patients.

Biomimetic Composite Scaffold Containing Small Intestinal Submucosa and Mesoporous Bioactive Glass Exhibits High Osteogenic and Angiogenic Capacity

Biomaterials with excellent osteogenic and angiogenic activities are desirable to repair massive bone defects. Decellularized matrix from porcine small intestinal submucosa (SIS) has attracted particular attention for tissue regeneration because it has strong angiogenic effects and retains plentiful bioactive components. However, it has inferior osteoinductivity and osteoconductivity. In this study, we developed porous composite of SIS combined with mesoporous bioactive glass (SIS/MBG) with the goal of improving the mechanical and biological properties. SIS/MBG scaffolds showed uniform interconnected macropores (∼150 μm), high porosity (∼76%), and enhanced compressive strength (∼0.87 MPa). The proliferation and osteogenic gene expression (Runx2, ALP, Ocn, and Col-Iα) of rat bone marrow stromal cells (rBMSCs) as well as the proliferation, angiogenic gene expression (VEGF, bFGF, and KDR), and tube formation capacity of human umbilical vein endothelial cells (HUVECs) in SIS/MBG scaffolds were significantly upregulated compared with nonmesoporous bioactive glass (BG)-modified SIS (SIS/BG) and SIS-only scaffolds. Western blot analysis revealed that SIS/MBG induced rBMSCs to osteogenic differentiation through the activation of Wnt/β-Catenin signaling pathway, and SIS/MBG enhanced angiogenic activity of HUVEC through the activation of PI3k/Akt pathways. The in vivo results demonstrated that SIS/MBG scaffolds significantly enhanced new bone formation and neovascularization simultaneously in critical-sized rat calvarial defects as compared with SIS/BG and SIS. Collectively, the osteostimulative and angiostimulative biomimetic composite scaffold SIS/MBG represents an exciting biomaterial option for bone regeneration.

A comparative study on the in vitro formation of hydroxyapatite, cytotoxicity and antibacterial activity of 58S bioactive glass substituted by Li and Sr

Lithium and strontium up to 10 mol% have been substituted for calcium in 58S bioactive glasses in order to enhance specific biological properties such as proliferation, alkaline phosphatase (ALP) activity of cells as well as antibacterial activity. In-vitro formation of hydroxyapatite was studied using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), inductively coupled plasma atomic emission spectrometry (ICP-AES) and scanning electron microscopy (SEM). Substitution of either Li or Sr for Ca in the composition had a retarding effect on the bioactivity while Li decreased and Sr increased the rate of ion release in the simulated body fluid solution. The dissolution rate showed to be inversely proportional to oxygen density of the bioactive glasses. The proposed mechanisms for the lowered bioactivity are a lower supersaturation degree for nucleation of apatite in Li substituted bioactive glasses and blocking of the active growth sites of calcium phosphate by Sr²⁺ in Sr substituted bioactive glasses. The proliferation rate and alkaline phosphate activity of osteoblast cell line MC3T3-E1 treated with Li and Sr bioactive glasses were studied. 3-(4,5dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and alkaline phosphate assay showed that all synthesized bioactive glasses with exception of 58S with 10 mol% SrO, exhibited statistically significant increase in both cell proliferation and alkaline phosphatase activity. Finally, 58S bioactive glass with 5 mol% Li₂O substitution for CaO was considered as a potential biomaterial in bone repair/regeneration therapies with enhanced biocompatibility, and alkaline phosphate activity, with a negligible loss in the bioactivity compared to the 58S bioglass. At the same time this composition had the highest antibacterial activity against methicillin-resistant Staphylococcus aureus bacteria among all synthesized Li and Sr substituted bioactive glasses.

Synthesis and characterization of manganese containing mesoporous bioactive glass nanoparticles for biomedical applications

Mesoporous bioactive glass (BG) nanoparticles based in the system: SiO₂-P₂O₅-CaO-MnO were synthesized via a modified Stöber process at various concentrations of Mn (0-7 mol %). The synthesized manganese-doped BG nanoparticles were characterized in terms of morphology, composition, in vitro bioactivity and antibacterial activity. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) analysis confirmed that the particles had spherical morphology (mean particle size: 110 nm) with disordered mesoporous structure. Energy dispersive X-ray spectroscopy (EDX) confirmed the presence of Mn, Ca, Si and P in the synthesized Mn-doped BG particles. Moreover, X-ray diffraction (XRD) analysis showed that Mn has been incorporated in the amorphous silica network (bioactive glass). Moreover, it was found that manganese-doped BG particles form apatite crystals upon immersion in simulated body fluid (SBF). Inductively coupled plasma atomic emission spectroscopy (ICP-OES) measurements confirmed that Mn is released in a sustained manner, which provided antibacterial effect against Bacillus subtilis, Pseudomonas aeruginosa and Staphylococcus aureus. The results indicate that the incorporation of Mn in the bioactive glass network is an effective strategy to develop novel multifunctional BG nanoparticles for bone tissue engineering.

The Incorporation of Strontium to Improve Bone-Regeneration Ability of Mesoporous Bioactive Glasses

Over the recent years, mesoporous bioactive glasses (MBGs) gained interest as bone regeneration systems, due to their excellent bioactivity and ability to release therapeutic molecules. In order to improve the bone regeneration ability of MBGs, the incorporation of Sr²⁺ ions, due to its recognized pro-osteogenenic potential, represents a very promising strategy. In this study, MBGs based on the SiO₂–CaO system and containing different percentages (2 and 4 mol %) of strontium were prepared by two synthesis methods, in the form of microspheres and nanoparticles. Sr-containing MBGs were characterized by FE-SEM, XRD and N₂ adsorption/desorption analysis. The in vitro bioactivity in SBF resulted excellent. The assessment of fibroblast cell (line L929) viability showed that Sr-containing MBGs were biocompatible both in form of micro- and nanoparticles. The osteogenic response of osteoblast-like SAOS-2 cells was investigated by analysing the expression of GAPDH, COL1a1, RANKL, SPARC, OPG and ALPL genes, as cell differentiation markers. The results indicate that the incorporation of Sr into MBG is beneficial for bone regeneration as promotes a pro-osteogenic effect, paving the way to the design of advanced devices enabled by these nanocarriers also in combination with drug release, for the treatment of bone pathologies, particularly in patients with osteoporosis.

Alendronate delivery on amino modified mesoporous bioactive glass scaffolds to enhance bone regeneration in osteoporosis rats

The regeneration capacity of osteoporotic bones is generally lower than that of normal bones. Nowadays, alendronate (AL) are orally administrated for osteoporosis due to the inhibition of bone resorption. However, systemic administration of AL is characterized by extremely low bioavailability and high toxicity. In this study, the amino-modified mesoporous bioactive glass scaffolds (N-MBGS) were fabricated by a simple powder processing technique as a novel drug-delivery system for AL. The effects of AL on the osteogenic differentiation of bone mesenchymal stem cells derived from ovariectomized rats (rBMSCs-OVX) were first estimated. The loading efficiency and release kinetics of AL on N-MBGS were investigated in vitro and the osteogenesis of AL-loaded N-MBGS in rat calvarial defect model was detected by micro-CT measurements and the histological assay. Our results revealed that proper concentration of AL significantly promoted osteogenic differentiation of rBMSCs-OVX. The amount and delivery rate of AL were greatly improved through amino modification. Additionally, scaffolds with AL showed better bone formation in vivo, especially for the N-MBGS group. Our results suggest that the novel amino-modified MBGS are promising drug-delivery system for osteoporotic bone defect repairing or regeneration. The experimental schematic of the novel amino-modified MBGS as a promising drug-delivery system for osteoporotic bone regeneration.

Bioactive Glasses: Where Are We and Where Are We Going?

Bioactive glasses caused a revolution in healthcare and paved the way for modern biomaterial-driven regenerative medicine. The first 45S5 glass composition, invented by Larry Hench fifty years ago, was able to bond to living bone and to stimulate osteogenesis through the release of biologically-active ions. 45S5-based glass products have been successfully implanted in millions of patients worldwide, mainly to repair bone and dental defects and, over the years, many other bioactive glass compositions have been proposed for innovative biomedical applications, such as soft tissue repair and drug delivery. The full potential of bioactive glasses seems still yet to be fulfilled, and many of today's achievements were unthinkable when research began. As a result, the research involving bioactive glasses is highly stimulating and requires a cross-disciplinary collaboration among glass chemists, bioengineers, and clinicians. The present article provides a picture of the current clinical applications of bioactive glasses, and depicts six relevant challenges deserving to be tackled in the near future. We hope that this work can be useful to both early-stage researchers, who are moving with their first steps in the world of bioactive glasses, and experienced scientists, to stimulate discussion about future research and discover new applications for glass in medicine.

Bioactive Glasses: From Parent 45S5 Composition to Scaffold-Assisted Tissue-Healing Therapies

Nowadays, bioactive glasses (BGs) are mainly used to improve and support the healing process of osseous defects deriving from traumatic events, tumor removal, congenital pathologies, implant revisions, or infections. In the past, several approaches have been proposed in the replacement of extensive bone defects, each one with its own advantages and drawbacks. As a result, the need for synthetic bone grafts is still a remarkable clinical challenge since more than 1 million bone-graft surgical operations are annually performed worldwide. Moreover, recent studies show the effectiveness of BGs in the regeneration of soft tissues, too. Often, surgical criteria do not match the engineering ones and, thus, a compromise is required for getting closer to an ideal outcome in terms of good regeneration, mechanical support, and biocompatibility in contact with living tissues. The aim of the present review is providing a general overview of BGs, with particular reference to their use in clinics over the last decades and the latest synthesis/processing methods. Recent advances in the use of BGs in tissue engineering are outlined, where the use of porous scaffolds is gaining growing importance thanks to the new possibilities given by technological progress extended to both manufacturing processes and functionalization techniques.

Highly-Bioreactive Silica-Based Mesoporous Bioactive Glasses Enriched with Gallium(III)

Beneficial effects in bone cell growth and antibacterial action are currently attributed to Ga3+ ions. Thus, they can be used to upgrade mesoporous bioactive glasses (MBGs), investigated for tissue engineering, whenever they released therapeutic amounts of gallium ions to the surrounding medium. Three gallium-enriched MBGs with composition (in mol %) xSiO₂-yCaO-zP₂O₅-5Ga₂O₃, being x = 70, y = 15, z = 10 for Ga_1; x = 80, y = 12, z = 3 for Ga_2; and x = 80, y = 15, z = 0 for Ga_3, were investigated and compared with the gallium-free 80SiO₂-15CaO-5P₂O₅ MBG (B). 29Si and 31P MAS NMR analyses indicated that Ga3+ acts as network modifier in the glass regions with higher polymerization degree and as network former in the zones with high concentration of classical modifiers (Ca2+ ions). Ga_1 and Ga_2 exhibited a quick in vitro bioactive response because they were coated by an apatite-like layer after 1 and 3 days in simulated body fluid. Although we have not conducted biological tests in this paper (cells or bacteria), Ga_1 released high but non-cytotoxic amounts of Ga3+ ions in Todd Hewitt Broth culture medium that were 140 times higher than the IC90 of Pseudomonas aeruginosa bacteria, demonstrating its potential for tissue engineering applications.

Fe-Doped Sol-Gel Glasses and Glass-Ceramics for Magnetic Hyperthermia

This work deals with the synthesis and characterization of novel Fe-containing sol-gel materials obtained by modifying the composition of a binary SiO₂-CaO parent glass with the addition of Fe₂O₃. The effect of different processing conditions (calcination in air vs. argon flowing) on the formation of magnetic crystalline phases was investigated. The produced materials were analyzed from thermal (hot-stage microscopy, differential thermal analysis, and differential thermal calorimetry) and microstructural (X-ray diffraction) viewpoints to assess both the behavior upon heating and the development of crystalline phases. N₂ adsorption-desorption measurements allowed determining that these materials have high surface area (40-120 m²/g) and mesoporous texture with mesopore size in the range of 18 to 30 nm. It was assessed that the magnetic properties can actually be tailored by controlling the Fe content and the environmental conditions (oxidant vs. inert atmosphere) during calcination. The glasses and glass-ceramics developed in this work show promise for applications in bone tissue healing which require the use of biocompatible magnetic implants able to elicit therapeutic actions, such as hyperthermia for bone cancer treatment.

A bifunctional scaffold with CuFeSe2 nanocrystals for tumor therapy and bone reconstruction

Bone tumor is one of major challenging issues clinically. After surgical intervention, a few bone tumor cells still remain around bone defects and then proliferate over days. Fabrication of specific biomaterials with dual functions of bone tumor therapy and bone regeneration is of great significance. In order to achieve this aim, we managed to prepare bioactive glass (BG) scaffolds functionalized by the CuFeSe₂ nanocrystals (BG-CFS) by combining 3D printing technique with solvothermal method. During the solvothermal reaction process, CuFeSe₂ nanocrystals could in situ grow on the strut surface of BG scaffolds and thus endow BG scaffolds excellent photothermal performance. The photothermal performance of BG-CFS scaffolds could be well regulated through altering the content of CuFeSe₂ nanocrystals and laser power density when exposed to the near infrared laser (808 nm). The BG-CFS scaffolds could not only effectively ablate the bone tumor cells (Saos-2 cells) in vitro, but also significantly inhibit bone tumor growth in vivo. Moreover, BG-CFS scaffolds could stimulate osteogenic gene expressions of rabbit bone marrow stromal cells (rBMSCs) and finally facilitate the formation of new bone in the bone defects. Our study, for the first time, combined the photothermal performance of semiconductor CuFeSe₂ nanocrystals with the bone-forming activity of bioactive glass scaffolds, which can offer a more extensive horizon for developing novel biomaterials with dual functions of bone tumor therapy and bone regeneration.

LAPONITE® nanorods regulating degradability, acidic-alkaline microenvironment, apatite mineralization and MC3T3-E1 cells responses to poly(butylene succinate) based bio-nanocomposite scaffolds

Novel bio-nanocomposite scaffolds for bone tissue engineering were prepared by incorporation of LAPONITE® (LAP) nanorods into poly(butylene succinate) (PBSu). The results showed that the scaffolds had well interconnected macroporous structures with macropore size in the range of 200–400 μm and porosity of around 70%. In addition, the water absorption, degradability and apatite mineralization ability of the scaffolds were clearly enhanced with the increase of LAP content. Moreover, the degradation of LAP produced alkaline products, which neutralized the acidic degradable products of PBSu, and formed a weak alkaline microenvironment similar to a biological environment. Furthermore, the adhesion, proliferation and differentiation of MC3T3-E1 cells onto the scaffolds were significantly promoted with the increase of LAP content, in which the scaffold with 30 wt% LAP (sPL30) exhibited the best stimulation effect on the cells responses. The results suggested that the promotion of cells responses could be ascribed to the improvements of surface characteristics (including roughness, hydrophilicity, ions release and apatite formation, etc.) of the scaffolds. The sPL30 scaffold with excellent biocompatibility, bioactivity and degradability had great potential for applications in bone tissue engineering.

PBSu/LAP bio-nanocomposite scaffolds were prepared, and the sPL30 scaffolds significantly stimulated cell adhesion and proliferation.

Potential of Bioactive Glasses for Cardiac and Pulmonary Tissue Engineering

Repair and regeneration of disorders affecting cardiac and pulmonary tissues through tissue-engineering-based approaches is currently of particular interest. On this matter, different families of bioactive glasses (BGs) have recently been given much consideration with respect to treating refractory diseases of these tissues, such as myocardial infarction. The inherent properties of BGs, including their ability to bond to hard and soft tissues, to stimulate angiogenesis, and to elicit antimicrobial effects, along with their excellent biocompatibility, support these newly proposed strategies. Moreover, BGs can also act as a bioactive reinforcing phase to finely tune the mechanical properties of polymer-based constructs used to repair the damaged cardiac and pulmonary tissues. In the present study, we evaluated the potential of different forms of BGs, alone or in combination with other materials (e.g., polymers), in regards to repair and regenerate injured tissues of cardiac and pulmonary systems.

Mesoporous Bioactive Glass Functionalized 3D Ti-6Al-4V Scaffolds with Improved Surface Bioactivity

Porous Ti-6Al-4V scaffolds fabricated by means of selective laser melting (SLM), having controllable geometrical features and preferable mechanical properties, have been developed as a class of biomaterials that hold promising potential for bone repair. However, the inherent bio-inertness of the Ti-6Al-4V alloy as the matrix of the scaffolds results in a lack in the ability to stimulate bone ingrowth and regeneration. The aim of the present study was to develop a bioactive coating on the struts of SLM Ti-6Al-4V scaffolds in order to add the desired surface osteogenesis ability. Mesoporous bioactive glasses (MBGs) coating was applied on the strut surfaces of the SLM Ti-6Al-4V scaffolds through spin coating, followed by a heat treatment. It was found that the coating could maintain the characteristic mesoporous structure and chemical composition of MBG, and establish good interfacial adhesion to the Ti-6Al-4V substrate. The compressive strength and pore interconnectivity of the scaffolds were not affected by the coating. Moreover, the results obtained from in vitro cell culture experiments demonstrated that the attachment, proliferation, and differentiation of human bone marrow stromal cells (hBMSCs) on the MBG-coated Ti-6Al-4V scaffolds were improved as compared with those on the conventional bioactive glass (BG)-coated Ti-6Al-4V scaffolds and bare-metal Ti-6Al-4V scaffolds. Our results demonstrated that the MBG coating by using the spinning coating method could be an effective approach to achieving enhanced surface biofunctionalization for SLM Ti-6Al-4V scaffolds.

Evaluation of antibacterial, angiogenic, and osteogenic activities of green synthesized gap-bridging copper-doped nanocomposite coatings

Titanium (Ti) and its alloys have been widely used in clinics for years. However, their bio-inert surface challenges application in patients with compromised surgical conditions. Numerous studies were conducted to modify the surface topography and chemical composition of Ti substrates, for the purpose of obtaining antibacterial, angiogenic, and osteogenic activities. In this study, using green electrophoretic deposition method, we fabricated gap-bridging chitosan-gelatin (CSG) nanocomposite coatings incorporated with different amounts of copper (Cu; 0.01, 0.1, 1, and 10 mM for Cu I, II, III, and IV groups, respectively) on the Ti substrates. Physicochemical characterization of these coatings confirmed that Cu ions were successfully deposited into the coatings in a metallic status. After rehydration, the coatings swelled by 850% in weight. Mechanical tests verified the excellent tensile bond strength between Ti substrates and deposited coatings. All Cu-containing CSG coatings showed antibacterial property against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. The antibacterial property was positively correlated with the Cu concentration. In vitro cytocompatibility evaluation demonstrated that activities of bone marrow stromal cells were not impaired on Cu-doped coatings except for the Cu IV group. Moreover, enhanced angiogenic and osteogenic activities were observed on Cu II and Cu III groups. Overall, our results suggested that Cu-doped CSG nanocomposite coating is a promising candidate to functionalize Ti materials with antibacterial, angiogenic, and osteogenic properties.

Intracellular co-delivery of Sr ion and phenamil drug through mesoporous bioglass nanocarriers synergizes BMP signaling and tissue mineralization

Inducing differentiation and maturation of resident multipotent stem cells (MSCs) is an important strategy to regenerate hard tissues in mal-calcification conditions. Here we explore a co-delivery approach of therapeutic molecules comprised of ion and drug through a mesoporous bioglass nanoparticle (MBN) for this purpose. Recently, MBN has offered unique potential as a nanocarrier for hard tissues, in terms of high mesoporosity, bone bioactivity (and possibly degradability), tunable delivery of biomolecules, and ionic modification. Herein Sr ion is structurally doped to MBN while drug Phenamil is externally loaded as a small molecule activator of BMP signaling, for the stimulation of osteo/odontogenesis and mineralization of human MSCs derived from dental pulp. The Sr-doped MBN (85Si:10Ca:5Sr) sol-gel processed presents a high mesoporosity with a pore size of ∼6nm. In particular, Sr ion is released slowly at a daily rate of ∼3ppm per mg nanoparticles for up to 7days, a level therapeutically effective for cellular stimulation. The Sr-MBN is internalized to most MSCs via an ATP dependent macropinocytosis within hours, increasing the intracellular levels of Sr, Ca and Si ions. Phenamil is loaded maximally ∼30% into Sr-MBN and then released slowly for up to 7days. The co-delivered molecules (Sr ion and Phenamil drug) have profound effects on the differentiation and maturation of cells, i.e., significantly enhancing expression of osteo/odontogenic genes, alkaline phosphatase activity, and mineralization of cells. Of note, the stimulation is a result of a synergism of Sr and Phenamil, through a Trb3-dependent BMP signaling pathway. This biological synergism is further evidenced in vivo in a mal-calcification condition involving an extracted tooth implantation in dorsal subcutaneous tissues of rats. Six weeks post operation evidences the osseous-dentinal hard tissue formation, which is significantly stimulated by the Sr/Phenamil delivery, based on histomorphometric and micro-computed tomographic analyses. The bioactive nanoparticles releasing both Sr ion and Phenamil drug are considered to be a promising therapeutic nanocarrier platform for hard tissue regeneration. Furthermore, this novel ion/drug co-delivery concept through nanoparticles can be extensively used for other tissues that require different therapeutic treatment.

STATEMENT OF SIGNIFICANCE

This study reports a novel design concept in inorganic nanoparticle delivery system for hard tissues - the co-delivery of therapeutic molecules comprised of ion (Sr) and drug (Phenamil) through a unique nanoparticle of mesoporous bioactive glass (MBN). The physico-chemical and biological properties of MBN enabled an effective loading of both therapeutic molecules and a subsequently sustained/controlled release. The co-delivered Sr and Phenamil demonstrated significant stimulation of adult stem cell differentiation in vitro and osseous/dentinal regeneration in vivo, through BMP signaling pathways. We consider the current combination of Sr ion with Phenamil is suited for the osteo/odontogenesis of stem cells for hard tissue regeneration, and further, this ion/drug co-delivery concept can extend the applications to other areas that require specific cellular and tissue functions.

A 3D graphene coated bioglass scaffold for bone defect therapy based on the molecular targeting approach

Development of a cell-free scaffold with excellent mechanical properties and osteoconductivity is of significant need for bone regeneration. Herein, a reduced graphene oxide (rGO) functionalized hierarchical macro-mesoporous bioactive glass scaffold integrated with an osteoblast-specific aptamer is rationally designed to recruit and induce the rapid differentiation of osteoblasts for bone regeneration. This scaffold exhibits a macroporous structure with fully interconnected open pores and shows excellent mechanical properties with a Young's modulus of ∼80 kPa, which provides a strong scaffold to support the growth of osteoblasts and bone tissue regeneration. Furthermore, the scaffold displays good performance in accelerating osteoblast differentiation and promoting new bone formation. The osteoblast recruitment is achieved since the osteoblast-specific aptamer can specifically target osteoblasts with strong binding affinity. Micro-computed tomography and histological tests confirmed that the large bone defects fully heal with new plate-like-pattern bone appearing both peripherally and centrally, suggesting the outstanding bone regeneration performance of this cell-free and graphene functionalized scaffold. Considering the promising bioapplications of the graphene functionalized bioactive glass scaffold with osteoblast recruitment capacity, our strategy paves a way for the design of new bioactive functional materials for tissue regeneration and shows attractive prospects in targeted therapy.