Electrospinning for drug delivery applications: A review

Electrospun Hyaluronan Nanofiber Membrane Immobilizing Aromatic Doxorubicin as Therapeutic and Regenerative Biomaterial

Lesioned tissue requires synchronous control of disease and regeneration progression after surgery. It is necessary to develop therapeutic and regenerative scaffolds. Here, hyaluronic acid (HA) was esterified with benzyl groups to prepare hyaluronic acid derivative (HA-Bn) nanofibers via electrospinning. Electrospun membranes with average fiber diameters of 407.64 ± 124.8 nm (H400), 642.3 ± 228.76 nm (H600), and 841.09 ± 236.86 nm (H800) were obtained by adjusting the spinning parameters. These fibrous membranes had good biocompatibility, among which the H400 group could promote the proliferation and spread of L929 cells. Using the postoperative treatment of malignant skin melanoma as an example, the anticancer drug doxorubicin (DOX) was encapsulated in nanofibers via hybrid electrospinning. The UV spectroscopy of DOX-loaded nanofibers (HA-DOX) revealed that DOX was successfully encapsulated, and there was a π-π interaction between aromatic DOX and HA-Bn. The drug release profile confirmed the sustained release of about 90%, achieved within 7 days. In vitro cell experiments proved that the HA-DOX nanofiber had a considerable inhibitory effect on B16F10 cells. Therefore, the HA-Bn electrospun membrane could facilitate the potential regeneration of injured skin tissues and be incorporated with drugs to achieve therapeutic effects, offering a powerful approach to developing therapeutic and regenerative biomaterial.

Designing Lignin-Based Biomaterials as Carriers of Bioactive Molecules

There is a need to develop circular and sustainable economies by utilizing sustainable, green, and renewable resources in high-tech industrial fields especially in the pharmaceutical industry. In the last decade, many derivatives of food and agricultural waste have gained considerable attention due to their abundance, renewability, biocompatibility, environmental amiability, and remarkable biological features. Particularly, lignin, which has been used as a low-grade burning fuel in the past, recently attracted a lot of attention for biomedical applications because of its antioxidant, anti-UV, and antimicrobial properties. Moreover, lignin has abundant phenolic, aliphatic hydroxyl groups, and other chemically reactive sites, making it a desirable biomaterial for drug delivery applications. In this review, we provide an overview of designing different forms of lignin-based biomaterials, including hydrogels, cryogels, electrospun scaffolds, and three-dimensional (3D) printed structures and how they have been used for bioactive compound delivery. We highlight various design criteria and parameters that influence the properties of each type of lignin-based biomaterial and corelate them to various drug delivery applications. In addition, we provide a critical analysis, including the advantages and challenges encountered by each biomaterial fabrication strategy. Finally, we highlight the prospects and future directions associated with the application of lignin-based biomaterials in the pharmaceutical field. We expect that this review will cover the most recent and important developments in this field and serve as a steppingstone for the next generation of pharmaceutical research.

Cross-Linked Electrospun pH-Sensitive Nanofibers Adsorbed with Temporin-Ra for Promoting Wound Healing

Bioresponsive nanodrug delivery systems have excellent potential in tissue engineering applications. Poly-anionic and poly-cationic biopolymers have provided a superior platform for designing pH-sensitive drug delivery systems. In this regard, hyaluronic acid-chitosan-polyvinyl alcohol complex nanofibers with high quality and reproducibility were produced by optimizing the solution preparation process. In addition, the synthesized composite nanofiber, with 66.82 kN/mm toughness, 200% swelling ratio, and 60% porosity, exhibited excellent properties to meet the requirements of the ideal wound dressing. Green cross-linking with citric acid prevented the destruction of the nanofiber even after prolonged immersion in biological solutions. ζ potential studies demonstrated that the synthesized nanofiber has a negative surface charge (∼-30) at physiological pH. The pK_a of the temporin-Ra peptide is about 10, and as a result the peptide molecules have a net positive charge in physiological conditions. Therefore, peptide molecules immobilized on the synthesized scaffold based on surface adsorption. In vivo evaluation has proven that the wound bed has an alkaline environment, facilitating peptide release from the nanofiber scaffold. Electrospun nanofibers can imitate the architecture of the extracellular matrix for accelerating wound healing. In vitro investigation showed better adhesion, proliferation, migration, and fibroblast cell growth on peptide-loaded nanofiber samples than other groups. In vivo studies on full-thickness wounds in the mouse model indicated that the designed nanofiber was gradually absorbed without causing dryness or infection. On day 6, the peptide-loaded nanofiber revealed 60% wound closure compared to the control group (17%). In addition, based on histological studies, the composite nanofiber demonstrated excellent tissue repair ability, hence these active nanofiber mats can be a good alternative to existing wound dressings. Gene expression studies show that the antimicrobial peptide promotes the inflammatory phase of wound healing in a shorter time frame by accelerating the tumor necrosis factor-α cytokine response.

Fabrication and Properties of the Multifunctional Rapid Wound Healing Panax notoginseng@Ag Electrospun Fiber Membrane

The Panax notoginseng@Ag core/shell electrospun fiber membrane was prepared by coaxial electrospinning combined with the UV reduction method (254 nm). The prepared Panax notoginseng@Ag core/shell nanofiber membrane has a three-dimensional structure, and its swelling ratio could reach as high as 199.87%. Traditional Chinese medicine Panax notoginseng can reduce inflammation, and the silver nanoparticles have antibacterial effects, which synergistically promote rapid wound healing. The developed Panax notoginseng@Ag core/shell nanofiber membrane can effectively inhibit the growth of the Gram-negative bacteria Escherichia coli and the Gram-positive bacteria Staphylococcus aureus. The wound healing experiments in Sprague Dawley mice showed that the wound residual area rate of the Panax notoginseng@Ag core/shell electrospun nanofiber membrane group was only 1.52% on day 9, and the wound of this group basically healed on day 12, while the wound residual area rate of the gauze treatment group (control group) was 16.3% and 10.80% on day 9 and day 12, respectively. The wound of the Panax notoginseng@Ag core/shell electrospun nanofiber membrane group healed faster, which contributed to the application of the nanofiber as Chinese medicine rapid wound healing dressings.

Nanofibers in Ocular Drug Targeting and Tissue Engineering: Their Importance, Advantages, Advances, and Future Perspectives

Nanofibers are frequently encountered in daily life as a modern material with a wide range of applications. The important advantages of production techniques, such as being easy, cost effective, and industrially applicable are important factors in the preference for nanofibers. Nanofibers, which have a broad scope of use in the field of health, are preferred both in drug delivery systems and tissue engineering. Due to the biocompatible materials used in their construction, they are also frequently preferred in ocular applications. The fact that they have a long drug release time as a drug delivery system and have been used in corneal tissue studies, which have been successfully developed in tissue engineering, stand out as important advantages of nanofibers. This review examines nanofibers, their production techniques and general information, nanofiber-based ocular drug delivery systems, and tissue engineering concepts in detail.

Photoluminescent Scaffolds Based on Natural and Synthetic Biodegradable Polymers for Bioimaging and Tissue Engineering

Non-invasive visualization and monitoring of tissue-engineered structures in a living organism is a challenge. One possible solution to this problem is to use upconversion nanoparticles (UCNPs) as photoluminescent nanomarkers in scaffolds. We synthesized and studied scaffolds based on natural (collagen-COL and hyaluronic acid-HA) and synthetic (polylactic-co-glycolic acids-PLGA) polymers loaded with β-NaYF₄:Yb³⁺, Er³⁺ nanocrystals (21 ± 6 nm). Histomorphological analysis of tissue response to subcutaneous implantation of the polymer scaffolds in BALB/c mice was performed. The inflammatory response of the surrounding tissues was found to be weak for scaffolds based on HA and PLGA and moderate for COL scaffolds. An epi-luminescent imaging system with 975 nm laser excitation was used for in vivo visualization and photoluminescent analysis of implanted scaffolds. We demonstrated that the UCNPs' photoluminescent signal monotonously decreased in all the examined scaffolds, indicating their gradual biodegradation followed by the release of photoluminescent nanoparticles into the surrounding tissues. In general, the data obtained from the photoluminescent analysis correlated satisfactorily with the histomorphological analysis.

Drug Delivery Systems for Localized Cancer Combination Therapy

With over 2 million cancer cases and over 600,000 cancer-associated deaths predicted in the U.S. for 2022, this life-debilitating disease continuously impacts the lives of people across the nation every day. Therapeutic treatment options for cancer have historically involved chemotherapies to eradicate tumors with cytotoxic mechanisms which can negatively affect the efficacy versus toxicity ratio of treatment. With a need for more directed and therapeutically active options, targeted small-molecule inhibitors and immunotherapies have since emerged to mitigate treatment-associated toxicities. However, aggressive tumors can employ a wide range of defense mechanisms to evade monotherapy treatment altogether, resulting in the recurrence of therapeutically resistant tumors. Therefore, many clinical routines have included combination therapy in which anticancer agents are combined to provide a synergistic attack on tumors. Even with this approach, maximizing the efficacy of cancer treatment is contingent upon the dose of drug that reaches the site of the tumor, so often therapy is administered at the site of a tumor via localized delivery platforms. Commonly used platforms for localized drug delivery include polymeric wafers, nanofibrous scaffolds, and hydrogels where drug combinations can be loaded and delivered synchronously. Attaining synergistic activity from these localized systems is dependent on proper material selection and fabrication methods. Herein, we describe these important considerations for enhancing the efficacy of cancer combination therapy through biodegradable, localized delivery systems.

Gelatin/calcium chloride electrospun nanofibers for rapid hemostasis

Blood coagulation is the body's main defense to bleeding caused by trauma and is divided into endogenous and exogenous pathways. Calcium ions play a very important role in the process of blood coagulation, as the ions activate the many enzymes that are required for coagulation. In this paper, gelatin hemostatic membranes containing calcium ions were prepared by electrospinning. The fibers were characterized with scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction. The biocompatibility and coagulation processes using the calcium ion-containing gelatin fibrous membranes were evaluated in vitro with dynamic whole-blood coagulation tests, hemolysis tests, coagulation time tests, and platelet adhesion tests. It was demonstrated that the calcium ion-containing gelatin membranes had lower hemolysis rates and shorter clotting times than commercially available hemostatic sponges and hemostatic gauzes. In vivo hemostasis experiments were also conducted on the tail vein and liver of mice. Animal experiments demonstrated that the incorporation of calcium ions into the electrospun gelatin membranes promoted platelet aggregation, ensured adhesion of the electrospun membrane to the wound and reduced the bleeding volume and hemostasis time. The composite calcium ion-gelatin electrospun membranes exhibited good in vivo and in vitro hemostatic abilities and accelerated blood clotting by stimulating the coagulation pathway to promote platelet aggregation at the wounds and the formation of mature blood clots for a new approach for acute trauma treatment.

The Immunosuppressive Niche Established with a Curcumin-Loaded Electrospun Nanofibrous Membrane Promotes Cartilage Regeneration in Immunocompetent Animals

Inflammatory cells mount an immune response against in vitro engineered cartilage implanted into immunocompetent animals, consequently limiting the usage of tissue-engineered cartilage to repair cartilage defects. In this study, curcumin (Cur)-an anti-inflammatory agent-was mixed with poly(lactic-co-glycolic acid) (PLGA) to develop a Cur/PLGA nanofibrous membrane with nanoscale pore size and anti-inflammatory properties. Fourier-transform infrared spectroscopy and high-performance liquid chromatography analyses confirmed the successful loading of Cur into the Cur/PLGA nanofibrous membrane. The results of the in vitro assay demonstrated the sustained release kinetics and enhanced stability of Cur in the Cur/PLGA nanofibrous membrane. Western blotting and enzyme-linked immunosorbent assay analyses revealed that the Cur/PLGA nanofibrous membrane significantly downregulated the expression of inflammatory cytokines (IL-1β, IL-6, and TNF-α). A chondrocyte suspension was seeded into a porous PLGA scaffold, and the loaded scaffold was cultured for 3 weeks in vitro to engineer cartilage tissues. The cartilage was packed with the in vitro engineered Cur/PLGA nanofibrous membrane and subcutaneously implanted into rats to generate an immunosuppressive niche. Compared with those in the PLGA-implanted and pure cartilage (without nanofibrous membrane package)-implanted groups, the cartilage was well preserved and the inflammatory response was suppressed in the Cur/PLGA-implanted group at weeks 2 and 4 post-implantation. Thus, this study demonstrated that packaging the cartilage with the Cur/PLGA nanofibrous membrane effectively generated an immunosuppressive niche to protect the cartilage against inflammatory invasion. These findings enable the clinical translation of tissue-engineered cartilage to repair cartilage defects.

Phytochemical-Based Nanomaterials against Antibiotic-Resistant Bacteria: An Updated Review

Antibiotic-resistant bacteria (ARB) is a growing global health threat, leading to the search for alternative strategies to combat bacterial infections. Phytochemicals, which are naturally occurring compounds found in plants, have shown potential as antimicrobial agents; however, therapy with these agents has certain limitations. The use of nanotechnology combined with antibacterial phytochemicals could help achieve greater antibacterial capacity against ARB by providing improved mechanical, physicochemical, biopharmaceutical, bioavailability, morphological or release properties. This review aims to provide an updated overview of the current state of research on the use of phytochemical-based nanomaterials for the treatment against ARB, with a special focus on polymeric nanofibers and nanoparticles. The review discusses the various types of phytochemicals that have been incorporated into different nanomaterials, the methods used to synthesize these materials, and the results of studies evaluating their antimicrobial activity. The challenges and limitations of using phytochemical-based nanomaterials, as well as future directions for research in this field, are also considered here. Overall, this review highlights the potential of phytochemical-based nanomaterials as a promising strategy for the treatment against ARB, but also stresses the need for further studies to fully understand their mechanisms of action and optimize their use in clinical settings.

Fabrication of Glutaraldehyde Vapor Treated PVA/SA/GO/ZnO Electrospun Nanofibers with High Liquid Absorbability for Antimicrobial of Staphylococcus aureus

In this study, we aim to develop organic-inorganic hybrid nanofibers containing high moisture retention and good mechanical performance as an antimicrobial dressing platform. The main theme of this work focuses on several technical tasks including (a) the electrospinning process (ESP) to produce organic polyvinyl alcohol/sodium alginate (PVA/SA) nanofibers with an excellent diameter uniformity and fibrous orientation, (b) the fabrication of inorganic nanoparticles (NPs) as graphene oxide (GO) and ZnO NPs to be added to PVA/SA nanofibers for enhancement of the mechanical properties and an antibacterial function to Staphylococcus aureus (S. aureus), and then (c) the crosslinking process for PVA/SA/GO/ZnO hybrid nanofibers in glutaraldehyde (GA) vapor atmosphere to improve the hydrophilicity and moisture absorption of specimens. Our results clearly indicate that the uniformity nanofiber with 7 wt% PVA and 2 wt% SA condition demonstrates 199 ± 22 nm in diameter using an electrospinning precursor solution of 355 cP in viscosity by the ESP process. Moreover, the mechanical strength of nanofibers was enhanced by 17% after the handling of a 0.5 wt% GO nanoparticles addition. Significantly, the morphology and size of ZnO NPs can be affected by NaOH concentration, where 1 M NaOH was used in the synthesis of 23 nm ZnO NPs corresponding to effective inhibition of S. aureus strains. The PVA/SA/GO/ZnO mixture successfully performed an antibacterial ability with an 8 mm inhibition zone in S. aureus strains. Furthermore, the GA vapor as a crosslinking agent acting on PVA/SA/GO/ZnO nanofiber provided both swelling behavior and structural stability performance. The swelling ratio increased up to 1.406%, and the mechanical strength was 1.87 MPa after 48 h of GA vapor treatment. Finally, we successfully synthesized the hybrid nanofibers of GA-treated PVA/SA/GO/ZnO accompanied with high moisturizing, biocompatibility, and great mechanical properties, which will be a novel multi-functional candidate for wound dressing composites for patients receiving surgical operations and first aid treatments.

Optimal delivery of poorly soluble drugs using electrospun nanofiber technology: Challenges, state of the art, and future directions

Poor aqueous solubility of both, existing drug molecules and those which are currently in the developmental stage, have posed a great challenge to pharmaceutical scientists because they often exhibit poor dissolution behavior and subsequent poor and erratic bioavailability. This has triggered extensive research to explore nanotechnology-based technology platforms for possible rescue. Recently, nanofibers have been exploited widely for diverse biomedical applications including for drug delivery. Electrospun nanofibers are capable of preserving the homogeneously loaded therapeutic agents in amorphous state potentialy impairing devitrification. The present review aims at providing an overview of the various key factors that affect the electrospinning process and characteristics of the nanofibers while fabrication of drug loaded nanofibers for poorly soluble drug candidates. The review explores various methodological advancements in the electrospinning process and set-ups for production scale-up. The various types of electrospun nanofibers (like simple matrix, core-sheath, Janus, and inclusion complex nanofibers) that have been exploited for the delivery of poorly soluble drugs are also critically assessed. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Electrospun fibers with blank surface and inner drug gradient for improving sustained release

New engineering methods and advanced strategies are highly desired for creating novel drug sustained release nanomaterials. In this study, a trilayer concentric spinneret was explored to implement several multifluid electrospinning processes. A trilayer core-shell nanofiber was successfully fabricated, which comprise a drug-free polymeric coating and an inner drug gradient distribution, and then compared with bilayer core-shell and monolithic medicated nanofibers. All the electrospun nanofibers similarly consisted of two components (guest drug acetaminophen and host polymer cellulose acetate) and presented a linear morphology. Due to the secondary interactions within nanofibers, loaded drug with amorphous state was detected, as demonstrated by SEM, DSC, XRD, and FTIR determinations. In vitro and in vivo gavage treatments to rats tests were carried out, the trilayer nanofiber with an elaborate structure design were demonstrated to provide better drug sustained release profile than the bilayer core-shell nanofibers in term of initial burst release, later tail-off release and long sustained release time period. The synergistic mechanism for improving the drug sustained release behaviors is disclosed. By breaking the traditional concepts about the implementation of multifluid electrospinning and the strategy of combining surface properties and inner structural characteristics, the present protocols open a new way for developing material processing methods and generating novel functional nanomaterials.

Unique Fiber Morphologies from Emulsion Electrospinning—A Case Study of Poly(ε-caprolactone) and Its Applications

The importance of electrospinning to produce biomimicking micro- and nano-fibrous matrices is realized by many who work in the area of fibers. Based on the solubility of the materials to be spun, organic solvents are typically utilized. The toxicity of the utilized organic solvent could be extremely important for various applications, including tissue engineering, biomedical, agricultural, etc. In addition, the high viscosities of such polymer solutions limit the use of high polymer concentrations and lower down productivity along with the limitations of obtaining desired fiber morphology. This emphasizes the need for a method that would allay worries about safety, toxicity, and environmental issues along with the limitations of using concentrated polymer solutions. To mitigate these issues, the use of emulsions as precursors for electrospinning has recently gained significant attention. Presence of dispersed and continuous phase in emulsion provides an easy route to incorporate sensitive bioactive functional moieties within the core-sheath fibers which otherwise could only be hardly achieved using cumbersome coaxial electrospinning process in solution or melt based approaches. This review presents a detailed understanding of emulsion behavior during electrospinning along with the role of various constituents and process parameters during fiber formation. Though many polymers have been studied for emulsion electrospinning, poly(ε-caprolactone) (PCL) is one of the most studied polymers for this technique. Therefore, electrospinning of PCL based emulsions is highlighted as unique case-study, to provide a detailed theoretical understanding, discussion of experimental results along with their suitable biomedical applications.

Electrospun Naringin-Loaded Fibers for Preventing Scar Formation during Wound Healing

Hypertrophic scars (HTSs) are aberrant structures that develop where skin is injured complexly and represent the result of a chronic inflammation as a healing response. To date, there is no satisfactory prevention option for HTSs, which is due to the complexity of multiple mechanisms behind the formation of these structures. The present work aimed to propose Biofiber (Biodegradable fiber), an advanced textured electrospun dressing, as a suitable solution for HTS formation in complex wounds. Biofiber has been designed as a 3-day long-term treatment to protect the healing environment and enhance wound care practices. Its textured matrix consists of homogeneous and well-interconnected Poly-L-lactide-co-poly-ε-caprolactone (PLA-PCL) electrospun fibers (size 3.825 ± 1.12 µm) loaded with Naringin (NG, 2.0% w/w), a natural antifibrotic agent. The structural units contribute to achieve an optimal fluid handling capacity demonstrated through a moderate hydrophobic wettability behavior (109.3 ± 2.3°), and a suitable balance between absorbency (389.8 ± 58.16%) and moisture vapor transmission rate (MVTR, 2645 ± 60.43 g/m2 day). The flexibility and conformability of Biofiber to the body surfaces is due to its innovative circular texture, that also allow it to obtain finer mechanical properties after 72 h in contact with Simulated Wound Fluid (SWF), with an elongation of 352.6 ± 36.10%, and a great tenacity (0.25 ± 0.03 Mpa). The ancillary action of NG results in a prolonged anti-fibrotic effect on Normal Human Dermal Fibroblasts (NHDF), through the controlled release of NG for 3 days. The prophylactic action was highlighted at day 3 with the down regulation of the major factors involved in the fibrotic process: Transforming Growth Factor β1 (TGF-β1), Collagen Type 1 alpha 1 chain (COL1A1), and α-smooth muscle actin (α-SMA). No significant anti-fibrotic effect has been demonstrated on Hypertrophic Human Fibroblasts derived from scars (HSF), proving the potential of Biofiber to minimize HTSs in the process of early wound healing as a prophylactic therapy.

Electrospun PLA-Based Biomaterials Loaded with Melissa officinalis Extract with Strong Antioxidant Activity

In the present study, the plant extract Melissa officinalis (M. officinalis) was successfully loaded in polymer fibrous materials on the basis of a biodegradable polyester-poly(L-lactide) (PLA) and biocompatible polyether-polyethylene glycol (PEG) by applying the electrospinning method. The optimal process conditions for the preparation of hybrid fibrous materials were found. The extract concentration was varied-0, 5 or 10 wt% in respect of the polymer weight, in order to study its influence on the morphology and the physico-chemical properties of the obtained electrospun materials. All the prepared fibrous mats were composed of defect-free fibers. The mean fiber diameters of the PLA, PLA/M. officinalis (5 wt%) and PLA/M. officinalis (10 wt%) were 1370 ± 220 nm, 1398 ± 233 nm and 1506 ± 242 nm, respectively. The incorporation of the M. officinalis into the fibers resulted in slight increase of the fiber diameters and in increase of the water contact angle values to 133°. The presence of the polyether in the fabricated fibrous material assisted the wetting of the materials imparting them with hydrophilicity (the value of the water contact angle become 0°). Extract-containing fibrous materials displayed strong antioxidant activity as determined by the 2,2-diphenyl-1-picryl-hydrazyl-hydrate free radical method. The DPPH solution color changed to yellow and the absorbance of the DPPH radical dropped by 88.7% and 91% after being in contact with PLA/M. officinalis and PLA/PEG/M. officinalis mats, respectively. These features revealed the M. officinalis-containing fibrous biomaterials promising candidates for pharmaceutical, cosmetic and biomedical use.

Drug Delivery Systems in Regenerative Medicine: An Updated Review

Modern drug discovery methods led to evolving new agents with significant therapeutic potential. However, their properties, such as solubility and administration-related challenges, may hinder their benefits. Moreover, advances in biotechnology resulted in the development of a new generation of molecules with a short half-life that necessitates frequent administration. In this context, controlled release systems are required to enhance treatment efficacy and improve patient compliance. Innovative drug delivery systems are promising tools that protect therapeutic proteins and peptides against proteolytic degradation where controlled delivery is achievable. The present review provides an overview of different approaches used for drug delivery.

Particles-based medicated wound dressings: a comprehensive review

Wound healing is a dynamic process that is controlled by many factors. The interest in developing wound dressings capable of providing the required environment for the proper wound healing process is ever expanding, and particles occupy a sizable share of the research area. This comprehensive review reports 10 years of research in terms of current advances, delivery system evaluation, outcomes and future directions. The review follows a clearly defined method of article search and screening. Retrieved papers are reviewed regarding the materials, formulation development, and in vitro/in vivo testing of particles-based wound dressings. The review summarized the current status of medicated wound dressing research, identifies gaps to be addressed, and represents a reference for researchers working on wound dressings.

Sustained Release of Antifungal and Antibacterial Agents from Novel Hybrid Degradable Nanofibers for the Treatment of Polymicrobial Osteomyelitis

This study aimed to develop a drug delivery system with hybrid biodegradable antifungal and antibacterial agents incorporated into poly lactic-co-glycolic acid (PLGA) nanofibers, facilitating an extended release of fluconazole, vancomycin, and ceftazidime to treat polymicrobial osteomyelitis. The nanofibers were assessed using scanning electron microscopy, tensile testing, water contact angle analysis, differential scanning calorimetry, and Fourier-transform infrared spectroscopy. The in vitro release of the antimicrobial agents was assessed using an elution method and a high-performance liquid chromatography assay. The in vivo elution pattern of nanofibrous mats was assessed using a rat femoral model. The experimental results demonstrated that the antimicrobial agent-loaded nanofibers released high levels of fluconazole, vancomycin, and ceftazidime for 30 and 56 days in vitro and in vivo, respectively. Histological assays revealed no notable tissue inflammation. Therefore, hybrid biodegradable PLGA nanofibers with a sustainable release of antifungal and antibacterial agents may be employed for the treatment of polymicrobial osteomyelitis.

Novel Synergistic Approach: Tazarotene-Calcipotriol-Loaded-PVA/PVP-Nanofibers Incorporated in Hydrogel Film for Management and Treatment of Psoriasis

Psoriasis is an autoimmune skin disease that generally affects 1%-3% of the total population globally. Effective treatment of psoriasis is limited because of numerous factors, such as ineffective drug delivery and efficacy following conventional pharmaceutical treatments. Nanofibers are widely being used as nanocarriers for effective treatment because of their multifunctional and distinctive properties, including a greater surface area, higher volume ratio, increased elasticity and improved stiffness and resistance to traction, favorable biodegradability, high permeability, and sufficient oxygen supply, which help maintain the moisture content of the skin and improve the bioavailability of the drugs. Similar to the extracellular matrix, nanofibers have a regeneration capacity, promoting cell growth, adhesion, and proliferation, and also have a more controlled release pattern compared with that of other conventional therapies at the psoriatic site. To ensure improved drug targeting and better antipsoriatic efficacy, this study formulated and evaluated a tazarotene (TZT)-calcipotriol (CPT)-loaded nanofiber and carbopol-based hydrogel film. The nanofiber was prepared using electrospinning with a polyvinyl alcohol/polyvinylpyrrolidone (PVA/PVP) K-90 polymeric blend that was later incorporated into a carbopol base to form hydrogel films. The prepared nanofibers were biochemically evaluated and in vitro and in vivo characterized. The mean diameters of the optimized formulation, i.e., TZT-loaded polyvinyl alcohol/polyvinylpyrrolidone nanofiber (TZT-PVA/PVP-NF) and TZT-CPT-loaded polyvinyl alcohol/polyvinylpyrrolidone nanofiber (TZT-CPT-PVA/PVP-NF) were 244.67 ± 58.11 and 252.31 ± 35.50 nm, respectively, as determined by scanning electron microscopy, and their tensile strength ranged from 14.02 ± 0.54 to 22.50 ± 0.03 MPa. X-ray diffraction revealed an increase in the amorphous nature of the nanofibers. The biodegradability studies of prepared nanofiber formulations, irrespective of their composition, showed that these completely biodegraded within 2 weeks of their application. The TZT-CPT-PVA/PVP-NF nanofibers exhibited 95.68% ± 0.03% drug release at the end of 72 h, indicating a controlled release pattern and following Higuchi release kinetics as a best-fit model. MTT assay, antioxidant and lipid profile tests, splenomegaly assessment, and weight fluctuation were all performed in the in vitro as well as in vivo studies. We found that the TZT-CPT-PVA/PVP-NF-based hydrogel film has high potential for antipsoriatic activity in imiquimod-induced Wistar rats in comparison with that of TT-PVA/PVP-NF nanofibers.

Alpha lipoic acid-loaded electrospun fibrous patch films protect heart in acute myocardial infarction mice by inhibiting oxidative stress

Oxidative stress, characterized by excessive accumulation of reactive oxygen species (ROS), is involved in acute myocardial infarction (AMI)-related pathological processes and vascular reperfusion therapy injury. Alpha lipoic acid (LA) exhibits excellent antioxidant properties, however, its application is limited by inherent characteristics, including rapid clearance and extensive volume distribution. In this study, we hypothesized that scavenging cardiac ROS using adequately delivered LA could promote heart repair. Here, we report a new strategy for dynamic-release LA to treat AMI disease. In particular, this involves using poly(lactic-co-glycolic) (PLGA) copolymers as carriers to form a thin film (LA@PLGA) via electrospinning technology to achieve controlled release of LA, which essentially blocking local ROS production in damaged hearts. The drug-loading capacity and capsulation efficiency of this compound film could be regulated by determining the dose proportions of LA and PLGA. The incubation of LA@PLGA showed strong anti-oxidative activity and anti-apoptosis effect in hydrogen peroxide-administered primary cardiomyocytes. Patching LA@PLGA on the infarcted cardiac surfaces of AMI mice dramatically improved heart functions and reduced cardiac fibrosis throughout ventricular remodeling process. Importantly, the attenuation of detrimental pathologies was observed, including oxidative stress, senescence, DNA damage, cytokine-related processes, apoptosis, and ferroptosis. These results suggest that PLGA-carried LA can reduce ROS damage and restore heart function after myocardial damage, demonstrating a great potential for LA drugs in treating AMI disease.

Recent Advances in Metal-Organic Framework (MOF) Asymmetric Membranes/Composites for Biomedical Applications

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials composed of metal and organic material. MOFs have fascinating properties, such as fine tunability, large specific surface area, and high porosity. MOFs are widely used for environmental protection, biosensors, regenerative medicine, medical engineering, cell therapy, catalysts, and drug delivery. Recent studies have reported various significant properties of MOFs for biomedical applications, such as drug detection and delivery. In contrast, MOFs have limitations such as low stability and low specificity in binding to the target. MOF-based membranes improve the stability and specificity of conventional MOFs by increasing the surface area and developing the possibility of MOF-ligand binding, while conjugated membranes dramatically increase the area of active functional groups. This special property makes them attractive for drug and biosensor fabrication, as both the spreading and solubility components of the porosity can be changed. Asymmetric membranes are a structure with high potential in the biomedical field, due to the different characteristics on its two surfaces, the possibility of adjusting various properties such as the size of porosity, transfer rate and selectivity, and surface properties such as hydrophilicity and hydrophobicity. MOF assisted asymmetric membranes can provide a platform with different properties and characteristics in the biomedical field. The latest version of MOF materials/membranes has several potential applications, especially in medical engineering, cell therapy, drug delivery, and regenerative medicine, which will be discussed in this review, along with their advantages, disadvantages, and challenges.

Synthesis and Characterization of Electrospun Sorbent for the Solid-Phase Extraction of Fluoroquinolones in Human Plasma and Their UHPLC-PDA Determination

In this work we investigated the synthesis and the characterization of electrospun polyacrylonitrile (PAN) and polymethyl methacrylate (PMMA) stabilized in air, made in a 5:1 ratio, used as sorbent for the solid-phase extraction of fluoroquinolones in plasma samples and the following quantification in UHPLC-PDA. Preliminary analyses of viscosity were carried out on the polymer solution to be sure about the electrospinability. Characterizations were performed on the electrospun membrane to evaluate the morphology (SEM scanning electron microscopy and AFM atomic force microscopy), the thermal degradation behavior (TGA thermogravimetric analysis), the porosity and the surface area (BET, Brunauer Emmett Teller), and the quantitative and qualitative distribution of atomic structures (FTIR infrared analysis in Fourier transform and EDX Energy Dispersive X-ray analysis). A solid-phase extraction method was developed by studying parameters such as the amount of sorbent and the pH of the sample. Finally, a UHPLC-PDA method for the analysis of fluoroquinolones was developed and validated in accordance with the guidelines and successfully applied. The use of the prepared sorbent combined with UHPLC-PDA has allowed the development of a method whose strengths are its speed, accuracy, sensitivity, and high recoveries.

Silk Fibroin Combined with Electrospinning as a Promising Strategy for Tissue Regeneration

The development of tissue engineering scaffolds is of great significance for the repair and regeneration of damaged tissues and organs. Silk fibroin (SF) is a natural protein polymer with good biocompatibility, biodegradability, excellent physical and mechanical properties and processability, making it an ideal universal tissue engineering scaffold material. Nanofibers prepared by electrospinning have attracted extensive attention in the field of tissue engineering due to their excellent mechanical properties, high specific surface area, and similar morphology as to extracellular matrix (ECM). The combination of silk fibroin and electrospinning is a promising strategy for the preparation of tissue engineering scaffolds. In this review, the research progress of electrospun silk fibroin nanofibers in the regeneration of skin, vascular, bone, neural, tendons, cardiac, periodontal, ocular and other tissues is discussed in detail.

Food Wastes and Microalgae as Sources of Bioactive Compounds and Pigments in a Modern Biorefinery: A Review

The United Nations 2030 Agenda for Sustainable Development has created more pressure on countries and society at large for the development of alternative solutions for synthetic and fossil fuel derived products, thus mitigating climate change and environmental hazards. Food wastes and microalgae have been studied for decades as potential sources of several compounds that could be employed in various fields of application from pharmaceutical to textile and packaging. Although multiple research efforts have been put towards extracting rich compounds (i.e., phenolic compounds, tocopherols, and tocotrienols) from these sources, they still remain overlooked as two major sources of bioactive compounds and pigments, mainly due to inefficient extraction processes. Hence, there is a growing need for the development of optimized extraction methods while employing non-organic solvent options following the main principles of green chemistry. This review will focus on delivering a clear and deep analysis on the existing procedures for obtaining bioactive compounds and pigments from food wastes derived from the most consumed and produced fruit crops in the world such as apples, oranges, cherries, almonds, and mangoes, and microalgal biomass, while giving light to the existing drawbacks in need to be solved in order to take full advantage of the rich properties present in these two major biorefinery sources.

Magnetic Response of Nano/Microparticles into Elastomeric Electrospun Fibers

Combining magnetic nanoparticles (MNPs) with high-voltage processes to produce ultra-thin magnetic nanofibers (MNFs) fosters the development of next-generation technologies. In this study, polycarbonate urethane nanofibers incorporating magnetic particles were produced via the electrospinning technique. Two distinct types of magnetic payload were used: (a) iron oxide nanoparticles (IONPs) with an average size and polydispersity index of 7.2 nm and 3.3%, respectively; (b) nickel particles (NiPs) exhibiting a bimodal size distribution with average sizes of 129 nanometers and 600 nanometers, respectively, and corresponding polydispersity indexes of 27.8% and 3.9%. Due to varying particle sizes, significant differences were observed in their aggregation and distribution within the nanofibers. Further, the magnetic response of the IONP and/or NiP-loaded fiber mats was consistent with their morphology and polydispersity index. In the case of IONPs, the remanence ratio (M_r/M_s) and the coercive field (H_c) were found to be zero, which agrees with their superparamagnetic behavior when the average size is smaller than 20-30 nm. However, the NiPs show M_r/M_s = 22% with a coercive field of 0.2kOe as expected for particles in a single or pseudo-single domain state interacting with each other via dipolar interaction. We conclude that magnetic properties can be modulated by controlling the average size and polydispersity index of the magnetic particles embedded in fiber mats to design magneto-active systems suitable for different applications (i.e., wound healing and drug delivery).

Electrospinning of Potential Medical Devices (Wound Dressings, Tissue Engineering Scaffolds, Face Masks) and Their Regulatory Approach

Electrospinning is the simplest and most widely used technology for producing ultra-thin fibers. During electrospinning, the high voltage causes a thin jet to be launched from the liquid polymer and then deposited onto the grounded collector. Depending on the type of the fluid, solution and melt electrospinning are distinguished. The morphology and physicochemical properties of the produced fibers depend on many factors, which can be categorized into three groups: process parameters, material properties, and ambient parameters. In the biomedical field, electrospun nanofibers have a wide variety of applications ranging from medication delivery systems to tissue engineering scaffolds and soft electronics. Many of these showed promising results for potential use as medical devices in the future. Medical devices are used to cure, prevent, or diagnose diseases without the presence of any active pharmaceutical ingredients. The regulation of conventional medical devices is strict and carefully controlled; however, it is not yet properly defined in the case of nanotechnology-made devices. This review is divided into two parts. The first part provides an overview on electrospinning through several examples, while the second part focuses on developments in the field of electrospun medical devices. Additionally, the relevant regulatory framework is summarized at the end of this paper.

Polymeric Membranes for Biomedical Applications

Polymeric membranes are selective materials used in a wide range of applications that require separation processes, from water filtration and purification to industrial separations. Because of these materials' remarkable properties, namely, selectivity, membranes are also used in a wide range of biomedical applications that require separations. Considering the fact that most organs (apart from the heart and brain) have separation processes associated with the physiological function (kidneys, lungs, intestines, stomach, etc.), technological solutions have been developed to replace the function of these organs with the help of polymer membranes. This review presents the main biomedical applications of polymer membranes, such as hemodialysis (for chronic kidney disease), membrane-based artificial oxygenators (for artificial lung), artificial liver, artificial pancreas, and membranes for osseointegration and drug delivery systems based on membranes.

Novel electrospun fibers as carriers for delivering a biocompatible Sm(iii) nanodrug for cancer therapy: fabrication, characterization, cytotoxicity and toxicity

The current study represents the successful fabrication and characterization of a Sm(iii) nano complex based on 2-cyano-N'-((4-oxo-4H-chromen-3-yl)methylene)acetohydrazide (CCMA). The fibrous Sm(iii) nanocomplex has been fabricated by the electrospinning technique. SEM analysis of the electrospun fibers has revealed that the fibers have a uniform structure and smooth surface without observing Sm(iii) nanocomplex crystals, i.e. the Sm(iii) nanocomplex has been well incorporated into the fibers. In vitro antitumor activity against two carcinogenic cell lines (HepG-2 and E.A.C.) as well as in vivo toxicity of pure Sm(iii) nanocomplex and its electrospun fibers have been detected. The biological results have shown that there is a significant antitumor activity with low toxicity of the pure Sm(iii) nanocomplex and its electrospun fibers with respect to different standard antitumor drugs. Also, the electrospun fibers recorded higher cytotoxicity (IC₅₀ = 0.1 μM (Hep-G); 0.09 μM (E.A.C)) and lower toxicity (LD₅₀ = 350 mg kg^-1) than the pure ones. The in vitro release rate of the Sm(iii) nanocomplex from electrospun fibers has also been detected. The results have shown that the burst releasing of the Sm(iii) nanocomplex is about 22% after 1 h at the beginning, then a cumulative release increased gradually over the following hours. All results demonstrate the potential use of the Sm(iii) nanocomplex as a potent antitumor drug and its electrospun fibers as superior drug carriers for the treatment of tumors.

PVA, licorice, and collagen (PLC) based hybrid bio-nano scaffold for wound healing application

Nanofibrous scaffolds with core-shell structures can deliver bioactive agents, augment mechanical properties, provide a high surface area to volume ratio, and most importantly mimic the structure of extracellular matrix (ECM) which enables to maintain of a moist environment, elimination of excess exudates and provide antibacterial properties to impede infections. This study has developed PVA, licorice, and collagen (PLC) based hybrid bio-nano scaffold by co-axial electrospinning technique for enhancing wound closure. The core layer was made by PVA & licorice extract and shell layer was created by collagen & licorice extract solution. The morphology, moisture management properties, presence of constituent polymer, thermal behavior, and mechanical properties of the developed samples were characterized by FE-SEM, moisture management tester (MMT), FT/IR, TGA, tensile testing machine. Furthermore, in vitro antibacterial assay was conducted by Kirby-Bauer disk diffusion method for investigating antibacterial properties and an in-vivo wound healing assessment was employed by observing the wound healing. Then FE-SEM images showed the lowest and highest average diameters 119 nm and 154 nm respectively, FT/IR spectra ensured the presence of all materials in the sample. Furthermore, the moisture management test result demonstrated slow absorbing and slow drying scaffolds which emphasized the eligibility of the sample to be an ideal candidate for wound healing. Moreover, the minimum and maximum zones of inhibition (ZOI) were found 7 mm and 8 mm against the bacteria Staphylococcus aureus. Finally, an in vivo wound healing assessment revealed a better healing performance of the developed samples after 10 days.

Electrospinning Inorganic Nanomaterials to Fabricate Bionanocomposites for Soft and Hard Tissue Repair

Tissue engineering (TE) has attracted the widespread attention of the research community as a method of producing patient-specific tissue constructs for the repair and replacement of injured tissues. To date, different types of scaffold materials have been developed for various tissues and organs. The choice of scaffold material should take into consideration whether the mechanical properties, biodegradability, biocompatibility, and bioresorbability meet the physiological properties of the tissues. Owing to their broad range of physico-chemical properties, inorganic materials can induce a series of biological responses as scaffold fillers, which render them a good alternative to scaffold materials for tissue engineering (TE). While it is of worth to further explore mechanistic insight into the use of inorganic nanomaterials for tissue repair, in this review, we mainly focused on the utilization forms and strategies for fabricating electrospun membranes containing inorganic components based on electrospinning technology. A particular emphasis has been placed on the biological advantages of incorporating inorganic materials along with organic materials as scaffold constituents for tissue repair. As well as widely exploited natural and synthetic polymers, inorganic nanomaterials offer an enticing platform to further modulate the properties of composite scaffolds, which may help further broaden the application prospect of scaffolds for TE.

Coaxial electrospun nanofibers as drug delivery system for local treatment of periodontitis

OBJECTIVES

The aim of the present study was to prepare resorbable polylactide fibers for periodontitis treatment using coaxial electrospinning to optimize the release of metronidazole (MNA) by reducing the initial burst effect.

METHODS

Poly(L-lactide-co-D,L-lactide) (PLA) fibers mats with different distributions of metronidazole (MNA) were manufactured by coaxial electrospinning (COAX). By COAX spinning the central core of the fiber was enriched with 40% MNA (m/m), while the sheath of the fiber consisted of PLA only (test group). In contrast, fibers of the control group were prepared by conventional electrospinning with the same amount of MNA but with a homogenous drug distribution (HDD - homogenously distributed drug). The release of MNA was determined by analyzing aliquots from the fiber mats using UV-VIS spectroscopy. Agar diffusion tests were carried out to determine the antibacterial effect on periodontopathogenic bacteria. Biocompatibility was tested in direct contact to human gingival fibroblasts (HGF) for two days.

RESULTS

The COAX mats showed a retarded drug release compared to the conventional HDD fibers. After 24 h, 64% of total MNA was released cumulatively from the COAX fibers while 90% of the MNA was released from the HDD fibers (controls). The antibacterial effect of COAX fibers was significantly higher after 24 h compared to the HDD fibers. Cell cultivation revealed significant higher numbers of vital cells among the COAX mats.

SIGNIFICANCE

COAX fibers showed improved sustained MNA release compared to conventional fibers and can be seen as potential drug delivery systems in local periodontitis treatment.

Encapsulation and delivery of phage as a novel method for gut flora manipulation in situ: A review

Intestinal flora regulation is an effective method to intervene and treat diseases associated with microbiome imbalance. In addition to conventional probiotic supplement, phage delivery has recently exhibited great prospect in modifying gut flora composition and regulating certain gene expression of gut bacteria. However, the protein structure of phage is vulnerable to external factors during storage and delivery, which leads to the loss of infection ability and flora regulation function. Encapsulation strategy provides an effective solution for improving phage stability and precisely controlling delivery dosage. Different functional materials including enzyme-responsive and pH-responsive polymers have been used to construct encapsulation carriers to protect phages from harsh conditions and release them in the colon. Meanwhile, diverse carriers showed different characteristics in structure and function, which influenced their protective effect and delivery efficiency. This review systematically summarizes recent research progress on the phage encapsulation and delivery, with an emphasis on function properties of carrier systems in the protection effect and colon-targeted delivery. The present review may provide a theoretical reference for the encapsulation and delivery of phage as microbiota modulator, so as to expedite the development of functional material and delivery carrier, as well as the advances in practical application of intestinal flora regulation.

Bilayer nanofibrous wound dressing prepared by electrospinning containing gallic acid and quercetin with improved biocompatibility, antibacterial, and antioxidant effects

OBJECTEIVES

The purpose of this study was to prepare an antibacterial, antioxidant, and biocompatible bilayer nanofibrous wound dressing by using electrospinning.

METHODS

The micromorphology and bilayer structure characteristics of the GA-Qe-PVP-PCL nanofibers were analyzed by SEM. The physicochemical characteristics were analyzed by XRD and FTIR. The uptake, mechanical properties, water contact angle, water vapor transmission and in vitro drug release were evaluated. In addition, the effect of antibacterial, antioxidant and biocompatability of the nanofibers were evaluated, respectively.

RESULTS

The SEM results showed that the GA-Qe-PVP-PCL nanofibers had a smooth surface, no beading phenomenon, and a prominent bilayer structure. The diameter and porosity of the drug-loading layer and waterproof support layer of the nanofibers were 842 ± 302 nm, 242 ± 50 nm, and 88.56 ± 1.67%, 94.49 ± 1.57%, respectively. Moreover, the water uptake, mechanical properties, water contact angle, and water vapor transmission showed ideal performance. The results of in vitro drug release indicated that GA and Qe were both released rapidly, which was conducive to accelerating wound healing. The GA-Qe-PVP-PCL nanofibers exhibited antibacterial effects against both bacteria as well as high antioxidant activity. Additionally, the GA-Qe-PVP-PCL nanofibers possessed good compatibility, could promote the proliferation, adhesion, and migration of L929 fibroblast cells.

CONCLUSION

The nanofibers we developed met the requirements of ideal materials for wound dressing, which makes the nanofibers the potential to be a wound dressing for wound care.

Electrospun fibers as carriers for topical drug delivery and release in skin bandages and patches for atopic dermatitis treatment

The skin is a complex layer system and the most important barrier between the environment and the organism. In this review, we describe some widespread skin problems, with a focus on eczema, which are affecting more and more people all over the world. Most of treatment methods for atopic dermatitis (AD) are focused on increasing skin moisture and protecting from bacterial infection and external irritation. Topical and transdermal treatments have specific requirements for drug delivery. Breathability, flexibility, good mechanical properties, biocompatibility, and efficacy are important for the patches used for skin. Up to today, electrospun fibers are mostly used for wound dressing. Their properties, however, meet the requirements for skin patches for the treatment of AD. Active agents can be incorporated into fibers by blending, coaxial or side-by-side electrospinning, and also by physical absorption post-processing. Drug release from the electrospun membranes is affected by drug and polymer properties and the technique used to combine them into the patch. We describe in detail the in vitro release mechanisms, parameters affecting the drug transport, and their kinetics, including theoretical approaches. In addition, we present the current research on skin patch design. This review summarizes the current extensive know-how on electrospun fibers as skin drug delivery systems, while underlining the advantages in their prospective use as patches for atopic dermatitis. This article is categorized under: Implantable Materials and Surgical Technologies > Nanomaterials and Implants Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement Therapeutic Approaches and Drug Discovery > Emerging Technologies.

The treatment efficacy of three-layered functional polymer materials as drug carrier for orthotopic colon cancer

Colorectal cancer (CRC) is a worldwide disease posing serious threats to people’s life. Surgery and postsurgical chemotherapy are still the first choices to control the rapid progression of cancer. However, tumor recurrence and even distant metastasis are prone to occur. As a result, it is in urgent demand to find a new method to control CRC progression while inhibiting distant metastasis. On this basis, this study developed the three-layered functionalized hydrogel-fibrous membrane-hydrogel composite materials. The Chinese traditional drugs 20 (S)-ginsenoside Rg3 (Rg3) and chemotherapeutic agent 5-fluorouracil (5-Fu) were loaded in the inner hydrogel and middle fibrous membrane and could be constantly released at the same time and space. The outer hydrogel was decorated with phenylboronic acid (PA) to interact with sialic acid expressed on the CRC cell surface. The composite materials possessed biocompatibility and showed no toxicity to normal human intestinal mucosa endothelial cells HIEC. According to the results, the cell viability of CT26 could be significantly decreased in vitro. The three-layered functionalized materials inhibited the original tumor progression and distant tumor metastasis to the liver in an orthotopic colon cancer mouse model by increasing the caspase3 expression and inhibiting the expressions of Bcl-2, Ki-67, and VEGF. In addition, the functions of major organs were not significantly damaged. Our study provides a safe and efficacious method of this three-layered functionalized hydrogel-fibrous membrane-hydrogel composite materials for CRC treatment.

Development of Functional Hybrid Polymers and Gel Materials for Sustainable Membrane-Based Water Treatment Technology: How to Combine Greener and Cleaner Approaches

Water quality and disposability are among the main challenges that governments and societies will outside during the next years due to their close relationship to population growth and urbanization and their direct influence on the environment and socio-economic development. Potable water suitable for human consumption is a key resource that, unfortunately, is strongly limited by anthropogenic pollution and climate change. In this regard, new groups of compounds, referred to as emerging contaminants, represent a risk to human health and living species; they have already been identified in water bodies as a result of increased industrialization. Pesticides, cosmetics, personal care products, pharmaceuticals, organic dyes, and other man-made chemicals indispensable for modern society are among the emerging pollutants of difficult remediation by traditional methods of wastewater treatment. However, the majority of the currently used waste management and remediation techniques require significant amounts of energy and chemicals, which can themselves be sources of secondary pollution. Therefore, this review reported newly advanced, efficient, and sustainable techniques and approaches for water purification. In particular, new advancements in sustainable membrane-based filtration technologies are discussed, together with their modification through a rational safe-by-design to modulate their hydrophilicity, porosity, surface characteristics, and adsorption performances. Thus, their preparation by the use of biopolymer-based gels is described, as well as their blending with functional cross-linkers or nanofillers or by advanced and innovative approaches, such as electrospinning.

Electrospun Polymer Nanofibers: Processing, Properties, and Applications

Electrospun polymer nanofibers (EPNF) constitute one of the most important nanomaterials with diverse applications. An overall review of EPNF is presented here, starting with an introduction to the most attractive features of these materials, which include the high aspect ratio and area to volume ratio as well as excellent processability through various production techniques. A review of these techniques is featured with a focus on electrospinning, which is the most widely used, with a detailed description and different types of the process. Polymers used in electrospinning are also reviewed with the solvent effect highlighted, followed by a discussion of the parameters of the electrospinning process. The mechanical properties of EPNF are discussed in detail with a focus on tests and techniques used for determining them, followed by a section for other properties including electrical, chemical, and optical properties. The final section is dedicated to the most important applications for EPNF, which constitute the driver for the relentless pursuit of their continuous development and improvement. These applications include biomedical application such as tissue engineering, wound healing and dressing, and drug delivery systems. In addition, sensors and biosensors applications, air filtration, defense applications, and energy devices are reviewed. A brief conclusion is presented at the end with the most important findings and directions for future research.

Bioresorbable Nonwoven Patches as Taxane Delivery Systems for Prostate Cancer Treatment

Prostate cancer is the second most common cancer in males. In the case of locally advanced prostate cancer radical prostatectomy is one of the first-line therapy. However, recurrence after resection of the tumor can appear. Drug-eluting bioresorbable implants acting locally in the area of the tumor or the resection margins, that reduce the risk of recurrence would be advantageous. Electrospinning offers many benefits in terms of local delivery so fiber-forming polyesters and polyestercarbonates which are suitable to be drug-loaded were used in the study to obtain CTX or DTX-loaded electrospun patches for local delivery. After a fast verification step, patches based on the blend of poly(glycolide-ε-caprolactone) and poly(lactide-glycolide) as well as patches obtained with poly(lactide-glycolide- ε-caprolactone) were chosen for long-term study. After three months, 60% of the drug was released from (PGCL/PLGA) + CTX and it was selected for final, anticancer activity analysis with the use of PC-3 and DU145 cells to establish its therapeutic potential. CTX-loaded patches reduced cell growth to 53% and 31% respectively, as compared to drug-free patches. Extracts from drug-free patches showed excellent biocompatibility with the PC-3 cell line. Cabazitaxel-loaded bioresorbable patches are a promising drug delivery system for prostate cancer therapy.

Progress of Electrospun Nanofibrous Carriers for Modifications to Drug Release Profiles

Electrospinning is an advanced technology for the preparation of drug-carrying nanofibers that has demonstrated great advantages in the biomedical field. Electrospun nanofiber membranes are widely used in the field of drug administration due to their advantages such as their large specific surface area and similarity to the extracellular matrix. Different electrospinning technologies can be used to prepare nanofibers of different structures, such as those with a monolithic structure, a core-shell structure, a Janus structure, or a porous structure. It is also possible to prepare nanofibers with different controlled-release functions, such as sustained release, delayed release, biphasic release, and targeted release. This paper elaborates on the preparation of drug-loaded nanofibers using various electrospinning technologies and concludes the mechanisms behind the controlled release of drugs.

Recent advances in regenerative biomaterials

Nowadays, biomaterials have evolved from the inert supports or functional substitutes to the bioactive materials able to trigger or promote the regenerative potential of tissues. The interdisciplinary progress has broadened the definition of 'biomaterials', and a typical new insight is the concept of tissue induction biomaterials. The term 'regenerative biomaterials' and thus the contents of this article are relevant to yet beyond tissue induction biomaterials. This review summarizes the recent progress of medical materials including metals, ceramics, hydrogels, other polymers and bio-derived materials. As the application aspects are concerned, this article introduces regenerative biomaterials for bone and cartilage regeneration, cardiovascular repair, 3D bioprinting, wound healing and medical cosmetology. Cell-biomaterial interactions are highlighted. Since the global pandemic of coronavirus disease 2019, the review particularly mentions biomaterials for public health emergency. In the last section, perspectives are suggested: (i) creation of new materials is the source of innovation; (ii) modification of existing materials is an effective strategy for performance improvement; (iii) biomaterial degradation and tissue regeneration are required to be harmonious with each other; (iv) host responses can significantly influence the clinical outcomes; (v) the long-term outcomes should be paid more attention to; (vi) the noninvasive approaches for monitoring in vivo dynamic evolution are required to be developed; (vii) public health emergencies call for more research and development of biomaterials; and (viii) clinical translation needs to be pushed forward in a full-chain way. In the future, more new insights are expected to be shed into the brilliant field-regenerative biomaterials.

Polymeric Nanofibers for Drug Delivery Applications: A Recent Review

With the rapid development of biomaterials and biotechnologies, various functional materials-based drug delivery systems (DDS) are developed to overcome the limitations of traditional drug release formulations, such as uncontrollable drug concentration in target organs/tissues and unavoidable adverse reactions. Polymer nanofibers exhibit promising characteristics including easy preparation, adjustable features of wettability and elasticity, tailored surface and interface properties, and surface-to-volume ratio, and are used to develop new DDS. Different kinds of drugs can be incorporated into the polymer nanofibers. Additionally, their release kinetics can be modulated via the preparation components, component proportions, and preparation processes, enabling their applications in several fields. A timely and comprehensive summary of polymeric nanofibers for DDS is thus highly needed. This review first describes the common methods for polymer nanofiber fabrication, followed by introducing controlled techniques for drug loading into and release from polymer nanofibers. Thus, the applications of polymer nanofibers in drug delivery were summarized, particularly focusing on the relation between the physiochemical properties of polymeric nanofibers and their DDS performance. It is ended by listing future perspectives. Graphical abstract.

Development of bioactive electrospun scaffolds suitable to support skin fibroblasts and release Lucilia sericata maggot excretion/secretion

Larval therapy has been reported to be beneficial in the treatment of chronic wounds by promoting granulation tissue formation, due to its antimicrobial properties and by degrading necrotic tissue. However, the use of live maggots is problematic for patient acceptance, and thus there is a need to develop materials which can release therapeutic biomolecules derived from maggot secretions to the wound bed. Here we describe the fabrication of a novel bioactive scaffold that can be loaded with Lucilia sericata maggot alimentary excretion/secretion fluids (L. sericata maggot E/S), and which can also provide structural stability for mammalian cell-growth and migration to support wound repair. Electrospun scaffolds were prepared from a poly(caprolactone)-poly(ethylene glycol)–block copolymer (PCL-b-PEG) blended with PCL with average fibre diameters of ~ 4 μm. The scaffolds were hydrophilic and were able to support viable fibroblasts that were able to infiltrate throughout the extent of the scaffold thickness. L. sericata maggot (E/S) was subsequently adsorbed to the surface and released over 21 days with retention of the protease activity that is responsible for supporting fibroblast migration. The incorporation of L. sericata maggot E/S on the surface of the electrospun fibres of PCL-PEG/PCL fibres is a novel approach with potential for future application to support skin wound healing within a clinical setting.

Inkjet Printing of Electrodes on Electrospun Micro- and Nanofiber Hydrophobic Membranes for Flexible and Smart Textile Applications

With the increasing demand for smart textile and sensor applications, the interest in printed electronics is rising. In this study, we explore the applicability of electrospun membranes, characterized by high porosity and hydrophobicity, as potential substrates for printed electronics. The two most common inks, silver and carbon, were used in inkjet printing to create a conductive paths on electrospun membranes. As substrates, we selected hydrophobic polymers, such as polyimide (PI), low- and high-molecular-weight poly (vinyl butyral-co-vinyl alcohol-co-vinyl acetate) (PVB) and polystyrene (PS). Electrospinning of PI and PVB resulted in nanofibers in the range of 300-500 nm and PVB and PS microfibers (1-5 μm). The printed patterns were investigated with a scanning electron microscope (SEM) and resistance measurements. To verify the biocompatibility of printed electrodes on the membranes, an indirect cytotoxicity test with cells (MG-63) was performed. In this research, we demonstrated good printability of silver and carbon inks on flexible PI, PVB and PS electrospun membranes, leading to electrodes with excellent conductivity. The cytotoxicity study indicated the possibility of using manufactured printed electronics for various sensors and also as topical wearable devices.

Rotary Jet Spinning (RJS): A Key Process to Produce Biopolymeric Wound Dressings

Wounds result from different causes (e.g., trauma, surgeries, and diabetic ulcers), requiring even extended periods of intensive care for healing, according to the patient's organism and treatment. Currently, wound dressings generated by polymeric fibers at micro and nanometric scales are promising for healing the injured area. They offer great surface area and porosity, mimicking the fibrous extracellular matrix structure, facilitating cell adhesion, migration, and proliferation, and accelerating the wound healing process. Such properties resulted in countless applications of these materials in biomedical and tissue engineering, also as drug delivery systems for bioactive molecules to help tissue regeneration. The techniques used to engineer these fibers include spinning methods (electro-, rotary jet-), airbrushing, and 3D printing. These techniques have important advantages, such as easy-handle procedure and process parameters variability (type of polymer), but encounter some scalability problems. RJS is described as a simple and low-cost technique resulting in high efficiency and yield for fiber production, also capable of bioactive agents' incorporation to improve the healing potential of RJS wound dressings. This review addresses the use of RJS to produce polymeric fibers, describing the concept, type of configuration, comparison to other spinning techniques, most commonly used polymers, and the relevant parameters that influence the manufacture of the fibers, for the ultimate use in the development of wound dressings.

Bio-Based Electrospun Fibers from Chitosan Schiff Base and Polylactide and Their Cu2+ and Fe3+ Complexes: Preparation and Antibacterial and Anticancer Activities

The Schiff base derivative (Ch-8Q) of chitosan (Ch) and 8-hydroxyquinoline-2-carboxaldehyde (8QCHO) was prepared and fibrous mats were obtained by the electrospinning of Ch-8Q/polylactide (PLA) blend solutions in trifluoroacetic acid (TFA). Complexes of the mats were prepared by immersing them in a solution of CuCl₂ or FeCl₃. Electron paramagnetic resonance (EPR) analysis was performed to examine the complexation of Cu²⁺(Fe³⁺) in the Ch-8Q/PLA mats complexes. The morphology of the novel materials and their surface chemical composition were studied by scanning electron microscopy (SEM), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). The performed microbiological screening demonstrated that in contrast to the neat PLA mats, the Ch-8Q-containing mats and their complexes were able to kill all S. aureus bacteria within 3 h of contact. These fibrous materials had efficiency in suppressing the adhesion of pathogenic bacteria S. aureus. In addition, Ch-8Q/PLA mats and their complexes exerted good anticancer efficacy in vitro against human cervical HeLa cells and human breast MCF-7 cells. The Ch-8Q-containing fibrous materials had no cytotoxicity against non-cancer BALB/c 3T3 mouse fibroblast cells. These properties render the prepared materials promising as wound dressings as well as for application in local cancer treatment.