High-resolution imaging techniques for the assessment of osteoporosis

Diagnostic imaging of trabecular bone microstructure for oral implants: a literature review

Several dental implant studies have reported that radiographic evaluation of bone quality can aid in reducing implant failure. Bone quality is assessed in terms of its quantity, density, trabecular characteristics and cells. Current imaging modalities vary widely in their efficiency in assessing trabecular structures, especially in a clinical setting. Most are very costly, require an extensive scanning procedure coupled with a high radiation dose and are only partially suitable for patient use. This review examines the current literature regarding diagnostic imaging assessment of trabecular microstructure prior to oral implant placement and suggests cone beam CT as a method of choice for evaluating trabecular bone microstructure.

Clinical imaging of bone microarchitecture with HR-pQCT

Osteoporosis, a disease characterized by loss of bone mass and structural deterioration, is currently diagnosed by dual-energy x-ray absorptiometry (DXA). However, DXA does not provide information about bone microstructure, which is a key determinant of bone strength. Recent advances in imaging permit the assessment of bone microstructure in vivo using high-resolution peripheral quantitative computed tomography (HR-pQCT). From these data, novel image processing techniques can be applied to characterize bone quality and strength. To date, most HR-pQCT studies are cross-sectional comparing subjects with and without fracture. These studies have shown that HR-pQCT is capable of discriminating fracture status independent of DXA. Recent longitudinal studies present new challenges in terms of analyzing the same region of interest and multisite calibrations. Careful application of analysis techniques and educated clinical interpretation of HR-pQCT results have improved our understanding of various bone-related diseases and will no doubt continue to do so in the future.

Cortical and trabecular bone structure analysis at the distal radius-prediction of biomechanical strength by DXA and MRI

The purpose of this study was to investigate whether the combination of dual-energy X-ray absorptiometry (DXA)-based bone mass and magnetic resonance imaging (MRI)-based cortical and trabecular structural measures improves the prediction of radial bone strength. Thirty-eight left forearms were harvested from formalin-fixed human cadavers. Bone mineral content (BMC) and bone mineral density (BMD) of the distal radius were measured using DXA. Cortical and trabecular structural measures of the distal radius were computed in high-resolution 1.5T MR images. Cortical measures included average cortical thickness and cross-sectional area. Trabecular measures included morphometric and texture parameters. The forearms were biomechanically tested in a fall simulation to measure absolute radial bone strength (failure load). Relative radial bone strength was determined by dividing radial failure loads by age, body mass index, radius length, and average radius cross-sectional area, respectively. DXA derived BMC and BMD showed statistically significant (p < 0.05) correlations with absolute and relative radial bone strength (r ≤ 0.78). Correlation coefficients for cortical and trabecular structural measures with absolute and relative radial bone strength amounted up to r = 0.59 and r = 0.74, respectively, (p < 0.05). In combination with DXA-based bone mass, trabecular but not, cortical structural measures, added in multiple regression models significant (p < 0.05) information in predicting absolute and relative radial bone strength (up to R adj = 0.88). Thus, a combination of DXA-based bone mass and MRI-based trabecular structural measures most accurately predicted absolute and relative radial bone strength, whereas structural measures of the cortex did not provide significant additional information in combination with DXA.

Advances in bone imaging for osteoporosis

The diagnosis and management of osteoporosis have been improved by the development of new quantitative methods of skeletal assessment and by the availability of an increasing number of therapeutic options, respectively. A number of imaging methods exist and all have advantages and disadvantages. Dual-energy X-ray absorptiometry (DXA) is the most widely available and commonly utilized method for clinical diagnosis of osteoporosis and will remain so for the foreseeable future. The WHO 10-year fracture risk assessment tool (FRAX(®)) will improve clinical use of DXA and the cost-effectiveness of therapeutic intervention. Improved reporting of radiographic features that suggest osteoporosis and the presence of vertebral fracture, which are powerful predictors of future fractures, could increase the frequency of appropriate DXA referrals. Quantitative CT remains predominantly a research tool, but has advantages over DXA--allowing measurement of volumetric density, separate measures of cortical and trabecular bone density, and evaluation of bone shape and size. High resolution imaging, using both CT and MRI, has been introduced to measure trabecular and cortical bone microstructure. Although these methods provide detailed insights into the effects of disease and therapies on bone, they are technically challenging and not widely available, so they are unlikely to be used in clinical practice.

Reproducibility of trabecular bone structure measurements of the distal radius at 1.5 and 3.0 T magnetic resonance imaging

The purpose of this study was to assess and compare the reproducibility of trabecular bone structure measurements of the distal radius at 1.5 and 3.0 T magnetic resonance imaging (MRI). Root mean square reproducibility errors ranged from 0.69% to 4.94% at 1.5 T MRI and from 0.38% to 5.80% at 3.0 T MRI. Thus, reproducibility errors of trabecular bone structure measurements are overall in an acceptable range and similar at 1.5 and 3.0 T MRI.

Textural characteristics of model and natural bone tissues and interfacial behavior of bound water

Water, as a probe liquid bound in model systems (highly disperse hydroxyapatite - protein composites as a model of the main components of bones) and rat bone tissues healthy and affected by osteoporosis occurred due to experimental Alzheimer's disease (EAD), has been investigated using low-temperature (1)H NMR spectroscopy, NMR cryoporometry, TG/DTG/DTA, DSC, and TG and DSC thermoporometry. The textural characteristics of these intact systems cannot be studied using the standard adsorption methods, but the cryoporometry and thermoporometry methods give these characteristics. The (1)H NMR spectra of water bound in model and natural bone tissues include signals, which can be assigned to strongly associated (typical) water (SAW, chemical shift of proton resonance δ(H)=5-6 ppm) and weakly associated (atypical) water (WAW) at δ(H)=1-2 ppm. Contributions of SAW and WAW give information on textural organization of both model and natural bones. The influence of such co-adsorbates as HCl, CDCl(3), CD(3)CN, C(6)D(6), and (CD(3))(2)SO on the interfacial behavior and clustering of bound water depends on their polarity, amounts of components, and textural and structural features of the materials analyzed with the (1)H NMR spectroscopy and cryoporometry methods. According to the NMR cryoporometry data, the EAD causes an increase in nanoporosity of the bone tissues. The total porosity and the specific surface area of biostructures (accessible for water molecules and estimated using NMR cryoporometry and TG thermoporometry methods with a model of cylindrical pores) are larger for the EAD sample. Weakly polar chloroform-d has a significant influence on the organization of water in the bone tissue, and this effect is greater for the EAD sample as more porous material.

Evaluation of bone microarchitecture by high-resolution peripheral quantitative computed tomography (HR-pQCT) in hemodialysis patients

Hemodialyzed patients have decreased bone strength not completely characterized. We evaluated bone microarchitecture in hemodialysis patients and compared it to that of subjects without renal disease by high-resolution peripheral quantitative computed tomography (HR-pQCT). Hemodialysis patients have a marked decreased in cortical density, thickness, and area with significant reduction in trabecular parameters that correlated with the severity of secondary hyperparathyroidism only in women.

INTRODUCTION

Although fracture risk is greatly increased in dialysis patients, the corresponding decreased in bone strength has not been completely characterized.

METHODS

We evaluated volumetric bone mineral density (vBMD) and bone microstructure by HR-pQCT at the distal radius and tibia in 50 hemodialyzed (HD) patients (30 females, mean age 53.2 ± 6 years and 20 males, mean age 59.1 ± 11 years) and 50 sex- and age-matched controls.

RESULTS

At the distal radius HD, women showed a 29% reduction in total and trabecular density and trabecular bone volume fraction (p < 0.0001) compared to controls. Trabecular number was reduced by 25% (p < 0.0001), while trabecular separation was increased by 51%. Cortical thickness (-40%, p < 0.0001) and cortical area (-42%, p < 0.0001) were the parameters most reduced, while compact density was the parameter least reduced (-15%, p < 0.0001). Similar findings were found at the tibia. In HD men, HR-pQCT at the distal radius and tibia showed a reduction in volumetric density and microstructure parameters to a lesser extent than in women. In the hemodialyzed group, cortical thickness at the radius was negatively correlated with age both in women and men. At the distal radius and tibia, we found significant negative correlations between Log iPTH and total alkaline phosphatase with cortical vBMD(r = -0.48, p < 0.01; r = -0.69, p < 0.001), thickness (-0.37, p < 0.05; r = -0.60, p < 0.001), and area ((r = -0.43, p = 0.02; r = -0.65, p < 0.001) but only in women.

CONCLUSION

We conclude that hemodialysis patients have a marked decreased in cortical density, thickness, and area with significant reduction in trabecular parameters that correlated with the severity of secondary hyperparathyroidism only in women.

New advances in imaging osteoporosis and its complications

Tremendous advances have been made over the past several decades in assessing osteoporosis and its complications. High resolution imaging combined with sophisticated computational techniques now provide a detailed analysis of bone structure and a much more accurate prediction of bone strength. These techniques have shown how different mechanisms of age-related bone weakening exist in males and females. Limitations peculiar to these more advanced imaging techniques currently hinder their adoption into mainstream clinical practice. As such, the ultimate quest remains a readily available, safe, high resolution technique capable of fully predicting bone strength, capable of showing how bone strength is faltering and precisely monitoring treatment effect. Whether this technique will be based on acquisition of spine/hip data or data obtained at peripheral sites reflective of changes happening in the spine and hip regions is still not clear. In the meantime, mainstream imaging will continue to improve the detection of osteoporosis related insufficiency fracture in the clinical setting. We, as clinicians, should aim to increase awareness of this fracture type both as a frequent and varied source of pain in patients with osteoporosis and as the ultimate marker of severely impaired bone strength.

Parametric response mapping of CT images provides early detection of local bone loss in a rat model of osteoporosis

Loss of bone mass due to disease, such as osteoporosis and metastatic cancer to the bone, is a leading cause of orthopedic complications and hospitalization. Onset of bone loss resulting from disease increases the risk of incurring fractures and subsequent pain, increasing medical expenses while reducing quality of life. Although current standard CT-based protocols provide adequate prognostic information for assessing bone loss, many of the techniques for evaluating CT scans rely on measures based on whole-bone summary statistics. This reduces the sensitivity at identifying local regions of bone resorption, as well as formation. In this study, we evaluate the effectiveness of a voxel-based image post-processing technique, called the Parametric Response Map (PRM), for identifying local changes in bone mass in weight-bearing bones on CT scans using an established animal model of osteoporosis. Serial CT scans were evaluated weekly using PRM subsequent to ovariectomy or sham surgeries over the period of one month. For comparison, bone volume fraction and mineral density measurements were acquired and found to significantly differ between groups starting 3 weeks post-surgery. High resolution ex vivo measurements acquired four weeks post-surgery validated the extent of bone loss in the surgical groups. In contrast to standard methodologies for assessing bone loss, PRM results were capable of identifying local decreases in bone mineral by week 2, which were found to be significant between groups. This study concludes that PRM is able to detect changes in bone mineral with higher sensitivity and spatial differentiation than conventional techniques for evaluating CT scans, which may aid in clinical decision making for patients suffering from bone loss.

Trabecular architecture and vertebral fragility in osteoporosis

Osteoporosis heightens vertebral fragility owing to the biomechanical effects of diminished bone structure and composition. These biomechanical effects are only partially explained by loss in bone mass, so additional factors that are independent of bone mass are also thought to play an important role in vertebral fragility. Recent advances in imaging equipment, imaging-processing methods, and computational capacity allow researchers to quantify trabecular architecture in the vertebra at the level of the individual trabecular elements and to derive biomechanics-based measures of architecture that are independent of bone mass and density. These advances have shed light on the role of architecture in vertebral fragility. In addition to the adverse biomechanical consequences associated with trabecular thinning and loss of connectivity, a reduction in the number of vertical trabecular plates appears to be particularly harmful to vertebral strength. In the clinic, detailed architecture analysis is primarily applied to peripheral sites such as the distal radius and tibia. Analysis of trabecular architecture at these peripheral sites has shown mixed results for discriminating between patients with and without a vertebral fracture independent of bone mass, but has the potential to provide unique insight into the effects of therapeutic treatments. Overall, it does appear that trabecular architecture has an independent role on vertebral strength. Additional research is required to determine how and where architecture should be measured in vivo and whether assessment of trabecular architecture in a clinical setting improves prospective fracture risk assessment for the vertebra.

Osteoporosis imaging: state of the art and advanced imaging

Osteoporosis is becoming an increasingly important public health issue, and effective treatments to prevent fragility fractures are available. Osteoporosis imaging is of critical importance in identifying individuals at risk for fractures who would require pharmacotherapy to reduce fracture risk and also in monitoring response to treatment. Dual x-ray absorptiometry is currently the state-of-the-art technique to measure bone mineral density and to diagnose osteoporosis according to the World Health Organization guidelines. Motivated by a 2000 National Institutes of Health consensus conference, substantial research efforts have focused on assessing bone quality by using advanced imaging techniques. Among these techniques aimed at better characterizing fracture risk and treatment effects, high-resolution peripheral quantitative computed tomography (CT) currently plays a central role, and a large number of recent studies have used this technique to study trabecular and cortical bone architecture. Other techniques to analyze bone quality include multidetector CT, magnetic resonance imaging, and quantitative ultrasonography. In addition to quantitative imaging techniques measuring bone density and quality, imaging needs to be used to diagnose prevalent osteoporotic fractures, such as spine fractures on chest radiographs and sagittal multidetector CT reconstructions. Radiologists need to be sensitized to the fact that the presence of fragility fractures will alter patient care, and these fractures need to be described in the report. This review article covers state-of-the-art imaging techniques to measure bone mineral density, describes novel techniques to study bone quality, and focuses on how standard imaging techniques should be used to diagnose prevalent osteoporotic fractures.

Osteoporosis imaging: state of the art and advanced imaging

Osteoporosis is becoming an increasingly important public health issue, and effective treatments to prevent fragility fractures are available. Osteoporosis imaging is of critical importance in identifying individuals at risk for fractures who would require pharmacotherapy to reduce fracture risk and also in monitoring response to treatment. Dual x-ray absorptiometry is currently the state-of-the-art technique to measure bone mineral density and to diagnose osteoporosis according to the World Health Organization guidelines. Motivated by a 2000 National Institutes of Health consensus conference, substantial research efforts have focused on assessing bone quality by using advanced imaging techniques. Among these techniques aimed at better characterizing fracture risk and treatment effects, high-resolution peripheral quantitative computed tomography (CT) currently plays a central role, and a large number of recent studies have used this technique to study trabecular and cortical bone architecture. Other techniques to analyze bone quality include multidetector CT, magnetic resonance imaging, and quantitative ultrasonography. In addition to quantitative imaging techniques measuring bone density and quality, imaging needs to be used to diagnose prevalent osteoporotic fractures, such as spine fractures on chest radiographs and sagittal multidetector CT reconstructions. Radiologists need to be sensitized to the fact that the presence of fragility fractures will alter patient care, and these fractures need to be described in the report. This review article covers state-of-the-art imaging techniques to measure bone mineral density, describes novel techniques to study bone quality, and focuses on how standard imaging techniques should be used to diagnose prevalent osteoporotic fractures.

Micro-MR imaging-based computational biomechanics demonstrates reduction in cortical and trabecular bone strength after renal transplantation

PURPOSE

To examine the ability of three-dimensional micro-magnetic resonance (MR) imaging-based computational biomechanics to detect mechanical alterations in trabecular bone and cortical bone in the distal tibia of incident renal transplant recipients 6 months after renal transplantation and compare them with bone mineral density (BMD) outcomes.

MATERIALS AND METHODS

The study was approved by the institutional review board and complied with HIPAA guidelines. Written informed consent was obtained from all subjects. Micro-MR imaging of distal tibial metaphysis was performed within 2 weeks after renal transplantation (baseline) and 6 months later in 49 participants (24 female; median age, 44 years; range, 19-61 years) with a clinical 1.5-T whole-body imager using a modified three-dimensional fast large-angle spin-echo pulse sequence. Micro-finite-element models for cortical bone, trabecular bone, and whole-bone section were generated from each image by delineating the endosteal and periosteal boundaries. Mechanical parameters (stiffness and failure load) were estimated with simulated uniaxial compression tests on the micro-finite-element models. Structural parameters (trabecular bone volume fraction [BV/TV, bone volume to total volume ratio], trabecular thickness [TbTh], and cortical thickness [CtTh]) were computed from micro-MR images. Total hip and spine areal BMD were determined with dual-energy x-ray absorptiometry (DXA). Parameters obtained at the follow-up were compared with the baseline values by using parametric or nonparametric tests depending on the normality of data.

RESULTS

All mechanical parameters were significantly lower at 6 months compared with baseline. Decreases in cortical bone, trabecular bone, and whole-bone stiffness were 3.7% (P = .03), 4.9% (P = .03), and 4.3% (P = .003), respectively. Decreases in cortical bone, trabecular bone, and whole-bone failure strength were 7.6% (P = .0003), 6.0% (P = .004), and 5.6% (P = .0004), respectively. Conventional structural measures, BV/TV, TbTh, and CtTh, did not change significantly. Spine BMD decreased by 2.9% (P < .0001), while hip BMD did not change significantly at DXA.

CONCLUSION

MR imaging-based micro-finite-element analysis suggests that stiffness and failure strength of the distal tibia decrease over a 6-month interval after renal transplantation.

Imaging-Based Methods for Non-invasive Assessment of Bone Properties Influenced by Mechanical Loading

PURPOSE

To describe the most common in vivo imaging-based research tools used to assess bone properties that are influenced by mechanical loading associated with exercise, habitual physical activity, or disease states. Bone is a complex metabolically active tissue that adapts to changes in mechanical loading by altering the amount and spatial organization of mineral.

METHOD

Using a narrative review design, the authors provide an overview of bone biology and biomechanics to emphasize the importance of bone size scale, porosity, and degree of mineralization when interpreting measures acquired using quantitative ultrasound (QUS), dual-energy X-ray absorptiometry (DXA), computed tomography (CT), magnetic resonance imaging (MRI), and finite element analysis (FEA). For each imaging modality, basic imaging principles, typical outcome measures associated with changes in mechanical loading, and salient features for physiotherapists are described.

MAIN RESULTS

While each imaging modality has strengths and limitations, currently CT-based methods are best suited for determining the effects of mechanical loading on bone properties-particularly in the peripheral skeleton.

CONCLUSIONS

Regardless of the imaging technology used, the physiotherapist must carefully consider the assumptions of the imaging-based method, the clinical context, the nature of the change in mechanical loading, and the expected time course for change in bone properties.

Purpose: To describe the most common in vivo imaging-based research tools used to assess bone properties that are influenced by mechanical loading associated with exercise, habitual physical activity, or disease states. Bone is a complex metabolically active tissue that adapts to changes in mechanical loading by altering the amount and spatial organization of mineral. Method: Using a narrative review design, the authors provide an overview of bone biology and biomechanics to emphasize the importance of bone size scale, porosity, and degree of mineralization when interpreting measures acquired using quantitative ultrasound (QUS), dual-energy X-ray absorptiometry (DXA), computed tomography (CT), magnetic resonance imaging (MRI), and finite element analysis (FEA). For each imaging modality, basic imaging principles, typical outcome measures associated with changes in mechanical loading, and salient features for physiotherapists are described. Main Results: While each imaging modality has strengths and limitations, currently CT-based methods are best suited for determining the effects of mechanical loading on bone properties—particularly in the peripheral skeleton. Conclusions: Regardless of the imaging technology used, the physiotherapist must carefully consider the assumptions of the imaging-based method, the clinical context, the nature of the change in mechanical loading, and the expected time course for change in bone properties.

Osteoporosis imaging: state of the art and advanced imaging

Osteoporosis is becoming an increasingly important public health issue, and effective treatments to prevent fragility fractures are available. Osteoporosis imaging is of critical importance in identifying individuals at risk for fractures who would require pharmacotherapy to reduce fracture risk and also in monitoring response to treatment. Dual x-ray absorptiometry is currently the state-of-the-art technique to measure bone mineral density and to diagnose osteoporosis according to the World Health Organization guidelines. Motivated by a 2000 National Institutes of Health consensus conference, substantial research efforts have focused on assessing bone quality by using advanced imaging techniques. Among these techniques aimed at better characterizing fracture risk and treatment effects, high-resolution peripheral quantitative computed tomography (CT) currently plays a central role, and a large number of recent studies have used this technique to study trabecular and cortical bone architecture. Other techniques to analyze bone quality include multidetector CT, magnetic resonance imaging, and quantitative ultrasonography. In addition to quantitative imaging techniques measuring bone density and quality, imaging needs to be used to diagnose prevalent osteoporotic fractures, such as spine fractures on chest radiographs and sagittal multidetector CT reconstructions. Radiologists need to be sensitized to the fact that the presence of fragility fractures will alter patient care, and these fractures need to be described in the report. This review article covers state-of-the-art imaging techniques to measure bone mineral density, describes novel techniques to study bone quality, and focuses on how standard imaging techniques should be used to diagnose prevalent osteoporotic fractures.

Integrated imaging approach to osteoporosis: state-of-the-art review and update

Osteoporosis is the most common of all metabolic bone disorders. It is characterized by low bone mass and microarchitectural deterioration of bone tissue, with a consequent increase in bone fragility and susceptibility to fractures. Because of the increasing aging of the world population, the number of persons affected by osteoporosis is also increasing. Complications related to osteoporosis can create social and economic burdens. For these reasons, the early diagnosis of osteoporosis is crucial. Conventional radiography allows qualitative and semiquantitative evaluation of osteoporosis, whereas other imaging techniques allow quantification of bone loss (eg, dual-energy x-ray absorptiometry and quantitative computed tomography [CT]), assessment for the presence of fractures (morphometry), and the study of bone properties (ultrasonography). In recent years, new imaging modalities such as micro-CT and high-resolution magnetic resonance imaging have been developed in an attempt to help diagnose osteoporosis in its early stages, thereby reducing social and economic costs and preventing patient suffering. The correct diagnosis of osteoporosis results in better management in terms of prevention and adequate pharmacologic or surgical treatment.

Musculoskeletal phenotype through the life course: the role of nutrition

This review considers the definition of a healthy bone phenotype through the life course and the modulating effects of muscle function and nutrition. In particular, it will emphasise that optimal bone strength (and how that is regulated) is more important than simple measures of bone mass. The forces imposed on bone by muscle loading are the primary determinants of musculoskeletal health. Any factor that changes muscle loading on the bone, or the response of bone to loading results in alterations of bone strength. Advances in technology have enhanced the understanding of a healthy bone phenotype in different skeletal compartments. Multiple components of muscle strength can also be quantified. The critical evaluation of emerging technologies for assessment of bone and muscle phenotype is vital. Populations with low and moderate/high daily Ca intakes and/or different vitamin D status illustrate the importance of nutrition in determining musculoskeletal phenotype. Changes in mass and architecture maintain strength despite low Ca intake or vitamin D status. There is a complex interaction between body fat and bone which, in addition to protein intake, is emerging as a key area of research. Muscle and bone should be considered as an integrative unit; the role of body fat requires definition. There remains a lack of longitudinal evidence to understand how nutrition and lifestyle define musculoskeletal health. In conclusion, a life-course approach is required to understand the definition of healthy skeletal phenotype in different populations and at different stages of life.

Generation of an atlas of the proximal femur and its application to trabecular bone analysis

Automatic placement of anatomically corresponding volumes of interest and comparison of parameters against a standard of reference are essential components in studies of trabecular bone. Only recently, in vivo MR images of the proximal femur, an important fracture site, could be acquired with high-spatial resolution. The purpose of this MRI trabecular bone study was two-fold: (1) to generate an atlas of the proximal femur to automatically place anatomically corresponding volumes of interest in a population study and (2) to demonstrate how mean models of geodesic topological analysis parameters can be generated to be used as potential standard of reference. Ten females were used to generate the atlas and geodesic topological analysis models, and 10 females were used to demonstrate the atlas-based trabecular bone analysis. All alignments were based on three-dimensional (3D) multiresolution affine transformations followed by 3D multiresolution free-form deformations. Mean distances less than 1 mm between aligned femora, and sharp edges in the atlas and in fused gray-level images of registered femora indicated that the anatomical variability was well accommodated and explained by the free-form deformations.

On the significance of motion degradation in high-resolution 3D μMRI of trabecular bone

RATIONALE AND OBJECTIVES

Subtle subject movement during high-resolution three-dimensional micro-magnetic resonance imaging of trabecular bone (TB) causes blurring, thereby rendering the data unreliable for quantitative analysis. In this work, the effects of translational and rotational motion displacements were evaluated qualitatively and quantitatively.

MATERIALS AND METHODS

In experiment 1, motion was induced by applying various simulated and previously observed in vivo trajectories as phase shifts to k-space or rotation angles to k-space segments of a virtually motion-free data set. In experiment 2, images that were visually free of motion artifacts from two groups of 10 healthy individuals, differing in age, were selected to probe the effects of motion on TB parameters. In both experiments, images were rated for motion severity, and the scores were compared to a focus criterion, the normalized gradient squared.

RESULTS

Strong correlations were observed between the motion quality scores and the corresponding normalized gradient squared values (R(2) = 0.52-0.64, P < .01). The results from experiment 1 demonstrated consistently lower image quality and alterations in structural parameters of 9% to 45% with increased amplitude of displacements. In experiment 2, the significant differences in structural parameter group means of the motion-free images were lost upon motion degradation. Autofocusing, a postprocessing correction method, partially recovered the sharpness of the original motion-free images in 13 of 20 subjects.

CONCLUSIONS

Quantitative TB structural measures are highly sensitive to subtle motion-induced degradation, which adversely affects precision and statistical power. The results underscore the influence of subject movement in high-resolution three-dimensional micro-magnetic resonance imaging and its correction for TB structure analysis.

Performance of the MRI-based virtual bone biopsy in the distal radius: serial reproducibility and reliability of structural and mechanical parameters in women representative of osteoporosis study populations

Serial reproducibility and reliability critically determine sensitivity to detect changes in response to intervention and provide a basis for sample size estimates. Here, we evaluated the performance of the MRI-based virtual bone biopsy in terms of 26 structural and mechanical parameters in the distal radius of 20 women in the age range of 50 to 75 years (mean=62.0 years, S.D.=8.1 years), representative of typical study populations in drug intervention trials and fracture studies. Subjects were examined three times at average intervals of 20.2 days (S.D.=14.5 days) by MRI at 1.5 T field strength at a voxel size of 137×137×410 μm(3). Methods involved prospective and retrospective 3D image registration and auto-focus motion correction. Analyses were performed from a central 5×5×5 mm(3) cuboid subvolume and trabecular volume consisting of a 13 mm axial slab encompassing the entire medullary cavity. Whole-volume axial stiffness and sub-regional Young's and shear moduli were computed by finite-element analysis. Whole-volume-derived aggregate mean coefficient of variation of all structural parameters was 4.4% (range 1.8% to 7.7%) and 4.0% for axial stiffness; corresponding data in the subvolume were 6.5% (range 1.6% to 13.0%) for structural, and 5.5% (range 4.6% to 6.5%) for mechanical parameters. Aggregate ICC was 0.976 (range 0.947 to 0.986) and 0.992 for whole-volume-derived structural parameters and axial stiffness, and 0.946 (range 0.752 to 0.991) and 0.974 (range 0.965 to 0.978) for subvolume-derived structural and mechanical parameters, respectively. The strongest predictors of whole-volume axial stiffness were BV/TV, junction density, skeleton density and Tb.N (R(2) 0.79-0.87). The same parameters were also highly predictive of sub-regional axial modulus (R(2) 0.88-0.91). The data suggest that the method is suited for longitudinal assessment of the response to therapy. The underlying technology is portable and should be compatible with all general-purpose MRI scanners, which is appealing considering the very large installed base of this modality.

High-resolution computed tomography for clinical imaging of bone microarchitecture

BACKGROUND

The role of bone structure, one component of bone quality, has emerged as a contributor to bone strength. The application of high-resolution imaging in evaluating bone structure has evolved from an in vitro technology for small specimens to an emerging clinical research tool for in vivo studies in humans. However, many technical and practical challenges remain to translate these techniques into established clinical outcomes.

QUESTIONS/PURPOSES

We reviewed use of high-resolution CT for evaluating trabecular microarchitecture and cortical ultrastructure of bone specimens ex vivo, extension of these techniques to in vivo human imaging studies, and recent studies involving application of high-resolution CT to characterize bone structure in the context of skeletal disease.

METHODS

We performed the literature review using PubMed and Google Scholar. Keywords included CT, MDCT, micro-CT, high-resolution peripheral CT, bone microarchitecture, and bone quality.

RESULTS

Specimens can be imaged by micro-CT at a resolution starting at 1 μm, but in vivo human imaging is restricted to a voxel size of 82 μm (with actual spatial resolution of ~ 130 μm) due to technical limitations and radiation dose considerations. Presently, this mode is limited to peripheral skeletal regions, such as the wrist and tibia. In contrast, multidetector CT can assess the central skeleton but incurs a higher radiation burden on the subject and provides lower resolution (200-500 μm).

CONCLUSIONS

CT currently provides quantitative measures of bone structure and may be used for estimating bone strength mathematically. The techniques may provide clinically relevant information by enhancing our understanding of fracture risk and establishing the efficacy of antifracture for osteoporosis and other bone metabolic disorders.

Non-destructive characterization of microdamage in cortical bone using low field pulsed NMR

The microcracking and damage accumulation process in human cortical bone was characterized by performing cyclic loading under four-point bending at ambient temperature. A non-destructive nuclear magnetic resonance (NMR) spin-spin (T(2)) relaxation technique was applied to quantify the apparent changes in bone porosity as a function of cyclic loading and prior damage accumulation, first to unloaded cortical bone to quantify the initial porosity and then to fatigued cortical bone that was subjected to cyclic loading to various levels of modulus degradation and microdamage in the form of microcracks. The NMR T(2) relaxation time and amplitude data of the fatigued bone were compared against the undamaged state. The difference in the T(2) relaxation time data was taken as a measure of the increase in pore size, bone porosity or microcrack density due to microdamage induced by cyclic loading. A procedure was developed to deduce the number and size distributions of microcracks formed in cortical bone. Serial sectioning of the fatigued bone showed the formation of microcracks along the cement lines or within the interstitial tissue. The results on the evolution of microdamage derived from NMR measurements were verified by independent experimental measurements of microcrack density using histological characterization techniques. The size distribution and population of the microcracks were then utilized in conjunction with an analytical model to predict the degradation of the elastic modulus of cortical bone as a function of damage accumulation.