The direction of RecA protein assembly onto single strand DNA is the same as the direction of strand assimilation during strand exchange

The recombination hot spot chi is a regulatory element that switches the polarity of DNA degradation by the RecBCD enzyme

Homologous recombination in Escherichia coli is stimulated at DNA sequences known as chi sites. Stimulation requires the multifunctional RecBCD enzyme, which is both a helicase and a 3' --> 5' exonuclease. Upon recognition of a properly oriented chi site, the 3' --> 5' exonuclease activity is attenuated. Here we show that in addition to attenuation of the 3' --> 5' exonuclease activity, recognition of chi by the RecBCD enzyme also up-regulates a nuclease activity of the opposite polarity, resulting in an enzyme that now preferentially degrades 5' --> 3'. These results demonstrate that chi is a unique regulatory element that converts the antirecombinogenic form of the RecBCD enzyme into a recombinogenic form by causing two distinct enzymatic changes: attenuation of the 3' --> 5' nuclease activity, and up-regulation of the 5' --> 3' nuclease activity. The consequence of chi recognition is the production of a recombination intermediate possessing a 3'-ssDNA overhang terminating at the chi sequence. This processing of a dsDNA end to a 3'-ssDNA overhang parallels that which occurs during the initation of homologous recombination in other pathways in E. coli, and in other organisms such as the yeast Saccharomyces cerevisiae.

RecA protein filaments: end-dependent dissociation from ssDNA and stabilization by RecO and RecR proteins

RecA protein filaments formed on circular (ssDNA) in the presence of ssDNA binding protein (SSB) are generally stable as long as ATP is regenerated. On linear ssDNA, stable RecA filaments are believed to be formed by nucleation at random sites on the DNA followed by filament extension in the 5' to 3' direction. This view must now be enlarged as we demonstrate that RecA filaments formed on linear ssDNA are subject to a previously undetected end-dependent disassembly process. RecA protein slowly dissociates from one filament end and is replaced by SSB. The results are most consistent with disassembly from the filament end nearest the 5' end of the DNA. The bound SSB prevents re-formation of the RecA filaments, rendering the dissociation largely irreversible. The dissociation requires ATP hydrolysis. Disassembly is not observed when the pH is lowered to 6.3 or when dATP replaces ATP. Disassembly is not observed even with ATP when both the RecO and RecR proteins are present in the initial reaction mixture. When the RecO and RecR proteins are added after most of the RecA protein has already dissociated, RecA protein filaments re-form after a short lag. The newly formed filaments contain an amount of RecA protein and exhibit an ATP hydrolysis rate comparable to that observed when the RecO and RecR proteins are included in the initial reaction mixture. The RecO and RecR proteins thereby stabilize RecA filaments even at the 5' ends of ssDNA, a fact which should affect the recombination potential of 5' ends relative to 3' ends. The location and length of RecA filaments involved in recombinational DNA repair is dictated by both the assembly and disassembly processes, as well as by the presence or absence of a variety of other proteins that can modulate either process.

Biochemistry of homologous recombination in Escherichia coli

Homologous recombination is a fundamental biological process. Biochemical understanding of this process is most advanced for Escherichia coli. At least 25 gene products are involved in promoting genetic exchange. At present, this includes the RecA, RecBCD (exonuclease V), RecE (exonuclease VIII), RecF, RecG, RecJ, RecN, RecOR, RecQ, RecT, RuvAB, RuvC, SbcCD, and SSB proteins, as well as DNA polymerase I, DNA gyrase, DNA topoisomerase I, DNA ligase, and DNA helicases. The activities displayed by these enzymes include homologous DNA pairing and strand exchange, helicase, branch migration, Holliday junction binding and cleavage, nuclease, ATPase, topoisomerase, DNA binding, ATP binding, polymerase, and ligase, and, collectively, they define biochemical events that are essential for efficient recombination. In addition to these needed proteins, a cis-acting recombination hot spot known as Chi (chi: 5'-GCTGGTGG-3') plays a crucial regulatory function. The biochemical steps that comprise homologous recombination can be formally divided into four parts: (i) processing of DNA molecules into suitable recombination substrates, (ii) homologous pairing of the DNA partners and the exchange of DNA strands, (iii) extension of the nascent DNA heteroduplex; and (iv) resolution of the resulting crossover structure. This review focuses on the biochemical mechanisms underlying these steps, with particular emphases on the activities of the proteins involved and on the integration of these activities into likely biochemical pathways for recombination.

The appearance of the UmuD'C protein complex in Escherichia coli switches repair from homologous recombination to SOS mutagenesis

The process of SOS mutagenesis in Escherichia coli requires (i) the replisome enzymes, (ii) RecA protein, and (iii) the formation of the UmuD'C protein complex which appears to help the replisome to resume DNA synthesis across a lesion. We found that the UmuD'C complex is an antagonist of RecA-mediated recombination. Homologous recombination in an Hfr x F- cross decreased as a function of the UmuD'C cell concentration; this effect was challenged by increasing RecA concentration. Recombination of a u.v.-damaged F-lac with the lac gene of an F- recipient was reduced by increasing the UmuD'C concentration while lac mutagenesis increased, showing an inverse relationship between recombination and SOS mutagenesis. We explain our data with the following model. The kinetics of appearance of the UmuD'C complex after DNA damage is slow, reaching a maximum after an hour. Within that period, excision and recombinational repair have had time to occur. When the UmuD'C concentration relative to the number of residual RecA filaments, not resolved by recombinational repair, becomes high enough, UmuD'C proteins provide a processive factor for the replisome to help replication bypass and repel the standing RecA filament. Thus, at a high enough concentration, the UmuD'C complex will switch repair from recombination to SOS mutagenesis.

Targeting in linear DNA duplexes with two complementary probe strands for hybrid stability

A new in vitro hybridization reaction targets two short complementary RecA protein-coated DNA probes to homologous sequences at any position in a linear duplex DNA molecule. Stable hybrids are obtained after RecA protein removal when both complementary probe strands are present in a four-stranded hybrid, but not when one probe strand is present in a three-stranded hybrid. In four-stranded hybrids with one probe strand biotinylated and the other radiolabelled, the deproteinized hybrids can be isolated and detected by affinity capture on streptavidin-coated magnetic beads. RecA-mediated targeting of complementary biotinylated DNA probe strands allows the affinity capture of 48.5-kilobase duplex lambda genomic DNA. These reactions provide a means of isolating any desired duplex gene or chromosomal DNA fragment.

ATP hydrolysis and the displaced strand are two factors that determine the polarity of RecA-promoted DNA strand exchange

When the recA protein (RecA) of Escherichia coli promotes strand exchange between single-stranded DNA (ssDNA) circles and linear double-stranded DNAs (dsDNA) with complementary 5' or 3' ends a polarity is observed. This property of RecA depends on ATP hydrolysis and the ssDNA that is displaced in the reaction since no polarity is observed in the presence of the non-hydrolyzable ATP analog, ATP gamma S, or in the presence of single-strand specific exonucleases. Based on these results a model is presented in which both the 5' and 3' complementary ends of the linear dsDNA initiate pairing with the ssDNA circle but only one end remains stably paired. According to this model, the association/dissociation of RecA in the 5' to 3' direction on the displaced strand determines the polarity of strand exchange by favoring or blocking its reinvasion into the newly formed dsDNA. Reinvasion is favored when the displaced strand is coated with RecA whereas it is blocked when it lacks RecA, remains covered by single-stranded DNA binding protein or is removed by a single-strand specific exonuclease. The requirement for ATP hydrolysis is explained if the binding of RecA to the displaced strand occurs via the dissociation and/or transfer of RecA, two functions that depend on ATP hydrolysis. The energy for strand exchange derives from the higher binding constant of RecA for the newly formed dsDNA as compared with that for ssDNA and not from ATP hydrolysis.

The structure of the E. coli recA protein monomer and polymer

The crystal structure of the recA protein from Escherichia coli at 2.3-A resolution reveals a major domain that binds ADP and probably single- and double-stranded DNA. Two smaller subdomains at the N and C termini protrude from the protein and respectively stabilize a 6(1) helical polymer of protein subunits and interpolymer bundles. This polymer structure closely resembles that of recA/DNA filaments determined by electron microscopy. Mutations in recA protein that enhance coprotease, DNA-binding and/or strand-exchange activity can be explained if the interpolymer interactions in the crystal reflect a regulatory mechanism in vivo.

RecA protein-promoted homologous pairing and strand exchange between intact and partially single-stranded duplex DNA

In the pairing reaction between circular gapped and fully duplex DNA, RecA protein first polymerizes on the gapped DNA to form a nucleoprotein filament. Conditions that removed the formation of secondary structure in the gapped DNA, such as addition of Escherichia coli single-stranded DNA binding protein or preincubation in 1 mM-MgCl2, optimized the binding of RecA protein and increased the formation of joint molecules. The gapped duplex formed stable joints with fully duplex DNA that had a 5' or 3' terminus complementary to the single-stranded region of the gapped molecule. However, the joints formed had distinct properties and structures depending on whether the complementary terminus was at the 5' or 3' end. Pairing between gapped DNA and fully duplex linear DNA with a 3' complementary terminus resulted in strand displacement, symmetric strand exchange and formation of complete strand exchange products. By contrast, pairing between gapped and fully duplex DNA with a 5' complementary terminus produced a joint that was restricted to the gapped region; there was no strand displacement or symmetric strand exchange. The joint formed in the latter reaction was likely a three-stranded intermediate rather than a heteroduplex with the classical Watson-Crick structure. We conclude that, as in the three-strand reaction, the process of strand exchange in the four-strand reaction is polar and progresses in a 5' to 3' direction with respect to the initiating strand. The present study provides further evidence that in both three-strand and four-strand systems the pairing and strand exchange reactions share a common mechanism.

The effects on strand exchange of 5' versus 3' ends of single-stranded DNA in RecA nucleoprotein filaments

Since the ends of DNA chains are thought to be important in homologous recombination, the way in which RecA protein and similar recombination enzymes process ends is important. We analyzed the effects of ends both on the formation of joints, and the progression of strand exchange. When the only homologous end was provided by a single strand, there was no significant difference between the formation of joints at a 5' end or a 3' end; but in agreement with the report of Konforti & Davis, Escherichia coli single-stranded DNA binding protein (SSB) selectively inhibited the activity of 5' ends. Complete strand exchange, assessed by study of linear single-stranded and double-stranded substrates, took place only in the 5' to 3' direction relative to DNA in the nucleoprotein filament. These observations pose a paradox: in the presence of SSB, of which there are about 800 tetramers per cell, the formation of homologous joints by RecA protein is favored at a 3' end, from which, however, authentic strand exchange appears not to occur. Since observations reported here and elsewhere show that joints have different properties when formed at a 5' versus a 3' end, we suggest that they may be processed differently in vivo.

rec genes and homologous recombination proteins in Escherichia coli

The twenty-five years since the first published report of recA mutants in Escherichia coli has seen the identification of more than 12 other recombination genes. The genes are usually grouped into three pathways named RecBCD, RecE and RecF for prominent genes which function in each. A proposal is made here that there are two RecF pathways, one sensitive and one resistant to exonuclease I, the SbcB enzyme. Five methods of grouping the genes functionally are discussed: 1) by enzyme activity, 2) by common indirect suppressor, 3) by common phenotype, 4) by common regulation and 5) by epistasis. Five classes of enzyme activities implicated in recombination are discussed according to their involvement in presynapsis, synapsis or postsynapsis: 1) nucleases 2) helicases 3) DNA-binding proteins 4) topoisomerases and 5) ligases. Plausible presynaptic steps for the RecBCD, RecF (SbcBS) and RecE pathways show the common feature of generating 3'-terminated single-stranded DNA (ssDNA). On this ssDNA it is proposed that a RecA protein filament is generated discontinuously. This implies the existence of nucleation and possibly measurement and 3' end protection proteins. Specific proposals are made for which recombination genes might encode such products. Finally the generality of the RecA-ssDNA-filament mechanism of synapsis in the cellular biological world is discussed.

RecA-DNA helical filaments in genetic recombination

Paul Howard-Flanders et al proposed a molecular model of RecA-mediated recombination reaction six years ago. How does this model stand at present? In answering this question, we focus on two leading ideas of the original model, namely the proposal of the coaxial arrangement of the aligned DNA molecules within helical RecA filaments and the proposal of the ATP independence of the pairing stage of the recombination reaction. Results obtained after the model was proposed are reviewed and compared with these original assumptions and postulates of the model. EM visualization of recombining DNA molecules, studies of the energetics of the RecA-mediated recombination reaction and biochemical analysis of deproteinized joint molecules are fully consistent with a triple-stranded DNA arrangement during the RecA-mediated recombination reaction and demonstrate the ATP independence of the pairing stage of the reaction.

Head to head dimer model; an alternative model for the strand exchange reaction by RecA protein of Escherichia coli

The RecA protein of E coli promotes a strand exchange reaction in vitro which appears to be similar to homologous genetic recombination in vivo. A model for the mechanism of strand transfer reaction by RecA protein has been proposed by Howard-Flanders et al based on the assumption that the RecA monomer has two distinctive DNA binding sites both of which can bind to ssDNA as well as dsDNA. Here, I propose an alternative model based on the assumption that RecA monomer has a single domain for binding to a polynucleotide chain with a unique polarity. In addition, the model is based on a few mechanical assumptions that, in the presence of ATP, two RecA molecules form a head to head dimer as the basic binding unit to DNA, and that the binding of RecA protein to a polynucleotide chain induces a structural change of RecA protein that causes a higher state of affinity for another RecA molecule that is expressed as cooperativy. The model explains many of the biochemical capabilities of RecA protein including the polar polymerization of RecA protein on single stranded DNA and polar strand transfer of DNA by the protein as well as the formation of a joint DNA molecule in a paranemic configuration. The model also presents the energetics in the strand transfer reaction.

The single-stranded DNA-binding protein of Escherichia coli

The single-stranded DNA-binding protein (SSB) of Escherichia coli is involved in all aspects of DNA metabolism: replication, repair, and recombination. In solution, the protein exists as a homotetramer of 18,843-kilodalton subunits. As it binds tightly and cooperatively to single-stranded DNA, it has become a prototypic model protein for studying protein-nucleic acid interactions. The sequences of the gene and protein are known, and the functional domains of subunit interaction, DNA binding, and protein-protein interactions have been probed by structure-function analyses of various mutations. The ssb gene has three promoters, one of which is inducible because it lies only two nucleotides from the LexA-binding site of the adjacent uvrA gene. Induction of the SOS response, however, does not lead to significant increases in SSB levels. The binding protein has several functions in DNA replication, including enhancement of helix destabilization by DNA helicases, prevention of reannealing of the single strands and protection from nuclease digestion, organization and stabilization of replication origins, primosome assembly, priming specificity, enhancement of replication fidelity, enhancement of polymerase processivity, and promotion of polymerase binding to the template. E. coli SSB is required for methyl-directed mismatch repair, induction of the SOS response, and recombinational repair. During recombination, SSB interacts with the RecBCD enzyme to find Chi sites, promotes binding of RecA protein, and promotes strand uptake.

Three-stranded paranemic joints: architecture, topological constraints and movement

The RecA and SSB proteins will catalyze the joining of two DNA molecules containing homologous sequences but lacking homologous ends in a reaction termed paranemic joining. The absence of homologous ends can be achieved by (1) pairing two circular DNAs or (2) using linear DNA(s) with ends lacking homology to the pairing partner. Here we have used electron microscopy (EM) to examine such pairings. Circular M13 single-stranded (ss) DNA enveloped by RecA protein into a presynaptic filament was paired with linear M13mp7 double-stranded (ds) DNA containing non-M13 sequences at its ends. Joint complexes were frequently seen in which the dsDNA was joined with the presynaptic filament over several kilobase (10(3) bases) lengths of the dsDNA. In this region, the presynaptic filament appeared disorganized as contrasted to the customary helical structure of the filament containing only a single strand of DNA. The same ultrastructure, but with greater detail, was observed when the samples were prepared for EM without fixation using a new method of fast-freezing and freeze-drying. EM immunogold staining demonstrated the presence of SSB protein in the disorganized region containing all three strands, but not in the regular helically arranged region. Psoralen photo-crosslinking of the DNA in the joint complexes revealed that the three DNA strands were in close proximity only over a single short (200 to 300 base-pairs) region. The joining of nicked circular M13 dsDNA and presynaptic filaments containing circular M13 ssDNA resulted in the intertwining of the dsDNA about the circular presynaptic filament. The joints produced in this case were short, as was the single region of psoralen photo-crosslinking of the three DNA strands. A model of how these long three-stranded joints form is presented involving the movement of a short "true" paranemic joint along the presynaptic filament.

Inhibition of recA protein promoted ATP hydrolysis. 2. Longitudinal assembly and disassembly of recA protein filaments mediated by ATP and ADP

There are at least two major conformations of recA nucleoprotein filaments formed on poly-(deoxythymidylic acid) [poly(dT)], one stabilized by ATP [or adenosine 5'-O-(3-thiotriphosphate) (ATP gamma S)] and one stabilized by ADP. Assembly of filaments in the ATP conformation is much faster than assembly in the ADP conformation. A third conformation may be present in the absence of nucleotides. The ATP and ADP conformations are mutually exclusive. When a mixture of ATP and ADP is present, recA protein binding is a function of the ADP/ATP ratio. Complete dissociation is observed when the ratio becomes 1.0-1.5. When a mixture of ATP and ADP is present at the beginning of a reaction, a transient phase lasting several minutes is observed in which the system approaches the state characteristic of the new ADP/ATP ratio. This phase is manifested by a lag in ATP hydrolysis when ATP is added to preformed ADP filaments, and by a burst in ATP hydrolysis in all other cases. More than 15 ATPs are hydrolyzed per bound recA monomer during the burst phase. The transient phase reflects an end-dependent disassembly process propagated longitudinally through the filament, rather than a slow conformation change in individual recA monomers or a slow exchange of one nucleotide for the other. The hysteresis exhibited by the system provides a number of insights relevant to the mechanism of recA-mediated DNA strand exchange.

Dissociation pathway for recA nucleoprotein filaments formed on linear duplex DNA

recA protein forms stable filaments on duplex DNA at low pH. When the pH is shifted above 6.8, recA protein remains stably bound to nicked circular DNA, but not to linear DNA. Dissociation of recA protein from linear duplex DNA proceeds to a non-zero endpoint. The kinetics and final extent of dissociation vary with several experimental parameters. The instability on linear DNA is most readily explained by a progressive unidirectional dissociation of recA protein from one end of the filament. Dissociation of recA protein from random points in the filament is eliminated as a possible mechanism by several observations: (1) the requirement for a free end; (2) the inverse and linear dependence of the rate of dissociation on DNA length (at constant DNA base-pair concentration); and (3) the kinetics of exposure of a restriction endonuclease site in the middle of the DNA. Evidence against another possible mechanism, ATP-mediated translocation of the filament along the DNA, is provided by a novel effect of the non-hydrolyzable ATP analog, ATP gamma S, which generally induces recA protein to bind any DNA tightly and completely inhibits ATP hydrolysis. We find that very low, sub-saturating levels of ATP gamma S completely stabilize the filament, while most of the ATP hydrolysis continues. If these levels of ATP gamma S are introduced after dissociation has commenced, further dissociation is blocked, but re-association does not occur. These observations are inconsistent with movement of recA protein along DNA that is tightly coupled to ATP hydrolysis. The recA nucleoprotein filament is polar and the protein binds the two strands asymmetrically, polymerizing mainly in the 5' to 3' direction on the initiating strand of a single-stranded DNA tailed duplex molecule. A model consistent with these results is presented.

General mechanism for RecA protein binding to duplex DNA

RecA protein binding to duplex DNA occurs by a multi-step process. The tau analysis, originally developed to examine the binding of RNA polymerase to promoter DNA, is adapted here to study two kinetically distinguishable reaction segments of RecA-double stranded (ds) DNA complex formation in greater detail. One, which is probably a rapid preequilibrium in which RecA protein binds weakly to native dsDNA, is found to have the following properties: (1) a sensitivity to pH, involving a net release of approximately one proton; (2) a sensitivity to salts; (3) little or no dependence on temperature; (4) little or no dependence on DNA length. The second reaction segment, the rate-limiting nucleation of nucleoprotein filament formation accompanied by partial DNA unwinding, is found to have the following properties: (1) a sensitivity to pH, involving a net uptake of approximately three protons; (2) a sensitivity to salts; (3) a relatively large dependence on temperature, with an Arrhenius activation energy of 39 kcal mol(-1); (4) a sensitivity to DNA topology; (5) a dependence on DNA length. These results contribute to a general mechanism for RecA protein binding to duplex DNA, which can provide a rationale for the apparent preferential binding to altered DNA structures such as pyrimidine dimers and Z-DNA.

Structure of helical RecA-DNA complexes. III. The structural polarity of RecA filaments and functional polarity in the RecA-mediated strand exchange reaction

The RecA protein of Escherichia coli has been used in vitro to mediate a strand-exchange reaction between homologous DNA molecules. A three-dimensional reconstruction of a RecA filament on double-stranded DNA has been previously determined from electron micrographs, and the reconstruction displays a clear axial polarity. The RecA-mediated strand-exchange reaction between a double-stranded DNA and a homologous single-stranded DNA that is complexed with a RecA helical polymer proceeds with a known polarity. Using image analysis of electron micrographs, we have determined the relation between the structural polarity of RecA filaments and the 3' and 5' polarity of single-stranded DNA. Thus, the structural polarity of RecA filaments can now be related to the direction in which the RecA-mediated strand-exchange reaction advances along the complexed single-stranded DNA.

Assembly of presynaptic filaments. Factors affecting the assembly of RecA protein onto single-stranded DNA

We have previously shown that the assembly of RecA protein onto single-stranded DNA (ssDNA) facilitated by SSB protein occurs in three steps: (1) rapid binding of SSB protein to the ssDNA; (2) nucleation of RecA protein onto this template; and (3) co-operative polymerization of additional RecA protein to yield presynaptic filaments. Here, electron microscopy has been used to further explore the parameters of this assembly process. The optimal extent of presynaptic filament formation required at least one RecA protein monomer per three nucleotides, high concentrations of ATP (greater than 3 mM in the presence of 12 mM-Mg2+), and relatively low concentrations of SSB protein (1 monomer per 18 nucleotides). Assembly was depressed threefold when SSB protein was added to one monomer per nine nucleotides. These effects appeared to be exerted at the nucleation step. Following nucleation, RecA protein assembled onto ssDNA at net rates that varied from 250 to 900 RecA protein monomers per minute, with the rate inversely related to the concentration of SSB protein. Combined sucrose sedimentation and electron microscope analysis established that SSB protein was displaced from the ssDNA during RecA protein assembly.

Complexes of the single-stranded DNA-binding protein from Escherichia coli (Eco SSB) with poly(dT). An investigation of their structure and internal dynamics by means of electron microscopy and NMR

Based on electron microscopy and NMR spectroscopy it is deduced that Eco SSB binds with moderate cooperativity to polynucleotides. Evidence is provided that the protein binds in its tetrameric form to the nucleic acid forming a nucleosome-like structure. NMR-spectroscopic analysis of the complexes shows that the carboxy-terminal region of the Eco SSB maintains a high flexibility even when the protein is immobilized in large protein-protein clusters.

Effects of overproduction of single-stranded DNA-binding protein on RecA protein-dependent processes in Escherichia coli

Overproduction of single-stranded DNA-binding protein (SSB) in Escherichia coli led to a decrease in the basal level of repressor LexA. Expression of the LexA-controlled genes was increased differentially, depending on the affinity of the LexA repressor for each promoter: expression of the recA and sfiA genes was increased 5-fold and 1.5-fold, respectively. Despite only a slight effect on expression of sfiA, which codes for an inhibitor of cell division, bacteria overproducing SSB produced elongated cells. In fact, the effect on cell shape appeared to be essentially independent of the expression of the sfiA and recA genes. Bacteria overproducing SSB were therefore phenotypically similar to bacteria partially starved of thymine, in which filamentation results from both sfiA-dependent and sfiA-recA-independent pathways. These data indicate that excess SSB acts primarily by perturbing DNA replication, thereby favoring gratuitous activation of RecA protein to promote cleavage of LexA protein. When bacteria overproducing SSB were exposed to a DNA-damaging agent such as ultraviolet light or mitomycin C, the recA and sfiA genes were fully induced. Induction of the sfiA gene occurred, however, at higher doses in bacteria overproducing SSB protein than in bacteria with normal levels of SSB. Whereas the efficiency of excision repair was apparently increased by excess SSB, the efficiency of post-replication recombinational repair was reduced as judged by a decrease in the recombination proficiency between a prophage and ultraviolet-irradiated heteroimmune infecting phage. Following induction of ssb+ bacteria with mitomycin C, the cellular content of SSB was slightly increased. These results provide evidence that SSB modulates RecA protein-dependent activities in vivo. It is proposed that SSB favors the formation of short complexes of RecA protein and single-stranded DNA that mediate cleavage of the LexA and lambda repressors, while it delays the formation of long nucleoprotein filaments, thereby slowing down RecA-promoted recombinational events in uninduced as well as in induced bacteria.

Stimulation of protein-directed strand exchange by a DNA helicase

The protein-mediated exchange of strands between a DNA double helix and a homologous DNA single strand involves both synapsis and branch migration, which are two important aspects of any general recombination reaction. Purified DNA-dependent ATPases from Escherichia coli (recA protein), Ustilago (rec 1 protein) and phage T4 (uvsX protein) have been shown to drive both synapsis and branch migration in vitro. The T4 gene 32 protein is a helix-destabilizing protein that greatly stimulates uvsX-protein-catalysed synapsis, and the E. coli SSB (single-strand binding) protein stimulates the analogous recA-protein-mediated reaction to a lesser degree. One suspects that several other proteins also play a role in the strand exchange process. For example, a DNA helicase could in principle accelerate branch migration rates by helping to melt the helix at the branch point. The T4 dda protein is a DNA helicase that is required to move the T4 replication fork past DNA template-bound proteins in vitro. Previously, we have shown that the dda protein binds to a column that contains immobilized T4 uvsX protein. We show here that this helicase specifically stimulates the branch migration reaction that the uvsX protein catalyses as a central part of the genetic recombination process in a T4 bacteriophage-infected cell.

Effects of the Escherichia coli SSB protein on the binding of Escherichia coli RecA protein to single-stranded DNA. Demonstration of competitive binding and the lack of a specific protein-protein interaction

The effect of the Escherichia coli single-stranded DNA binding (SSB) protein on the stability of complexes of E. coli RecA protein with single-stranded DNA has been investigated through direct DNA binding experiments. The effect of each protein on the binding of the other to single-stranded DNA, and the effect of SSB protein on the transfer rate of RecA protein from one single-stranded DNA molecule to another, were studied. The binding of SSB protein and RecA protein to single-stranded phage M13 DNA is found to be competitive and, therefore, mutually exclusive. In the absence of a nucleotide cofactor, SSB protein binds more tightly to single-stranded DNA than does RecA protein, whereas in the presence of ATP-gamma-S, RecA protein binds more tightly than SSB protein. In the presence of ATP, an intermediate result is obtained that depends on the type of DNA used, the temperature, and the magnesium ion concentration. When complexes of RecA protein, SSB protein and single-stranded M13 DNA are formed under conditions of slight molar excess of single-stranded DNA, no effect of RecA protein on the equilibrium stability of the SSB protein-single-stranded DNA complex is observed. Under similar conditions, SSB protein has no observed effect on the stability of the RecA protein-etheno M13 DNA complex. Finally, measurements of the rate of RecA protein transfer from RecA protein-single-stranded DNA complexes to competing single-stranded DNA show that there is no kinetic stabilization of the RecA protein-etheno M13 DNA complex by SSB protein, but that a tenfold stabilization is observed when single-stranded M13 DNA is used to form the complex. However, this apparent stabilizing effect of SSB protein can be mimicked by pre-incubation of the RecA protein-single-stranded M13 DNA complex in low magnesium ion concentration, suggesting that this effect of SSB protein is indirect and is mediated through changes in the secondary structure of the DNA. Since no direct effect of SSB protein is observed on either the equilibrium or dissociation properties of the RecA protein-single-stranded DNA complex, it is concluded that the likely effect of SSB protein in the strand assimilation reaction is on a slow step in the association of RecA protein with single-stranded DNA. Direct evidence for this conclusion is presented in the accompanying paper.

DNA synthesis dependent on genetic recombination: characterization of a reaction catalyzed by purified bacteriophage T4 proteins

To simulate a reaction that occurs in T4-infected cells, we have developed an in vitro DNA synthesis system that requires seven highly purified proteins encoded by this bacteriophage: the DNA polymerase "holoenzyme" (four proteins), gene 32 protein, dda DNA helicase, and uvsX protein - an enzyme that catalyzes homologous DNA pairing and is functionally homologous to the recA protein. In the reaction observed, the 3'OH end of one single-stranded DNA molecule primes DNA synthesis using a double-stranded DNA molecule of homologous sequence as the template. The uvsX protein continuously removes the new DNA chain from its template, so that DNA is synthesized by a conservative mechanism. This type of reaction, which requires the cooperation of recombination and replication enzymes, seems likely to be a general feature of DNA metabolism.

Structure of helical RecA-DNA complexes. Complexes formed in the presence of ATP-gamma-S or ATP

Electron micrographs of RecA-DNA filaments, formed under several different conditions, have been analyzed and the filament images reconstructed in three dimensions. In the presence of ATP and a non-hydrolyzable ATP analog. ATP-gamma-S, the RecA protein forms with DNA a right-handed helical complex with a pitch of approximately 95 A. The most detailed view of the filament was obtained from analysis of RecA filaments on double-stranded DNA in the presence of ATP-gamma-S. There are approximately six subunits of RecA per turn of the helix, but both this number and the pitch are variable. From the examination of single filaments and filament-filament interactions, a picture of an extremely flexible protein structure emerges. The subunits of RecA protein are seen to be arranged in such a manner that the bound DNA must be partially exposed and able to come into contact with external DNA molecules. The RecA structure determined in the presence of ATP-gamma-S appears to be the same as the "pre-synaptic" state that occurs with ATP, in which there is recognition and pairing between homologous DNA molecules.

Continuous association of Escherichia coli single-stranded DNA binding protein with stable complexes of recA protein and single-stranded DNA

The single-stranded DNA binding protein of Escherichia coli (SSB) stimulates recA protein promoted DNA strand exchange reactions by promoting and stabilizing the interaction between recA protein and single-stranded DNA (ssDNA). Utilizing the intrinsic tryptophan fluorescence of SSB, an ATP-dependent interaction has been detected between SSB and recA-ssDNA complexes. This interaction is continuous for periods exceeding 1 h under conditions that are optimal for DNA strand exchange. Our data suggest that this interaction does not involve significant displacement of recA protein in the complex by SSB when ATP is present. The properties of this interaction are consistent with the properties of SSB-stabilized recA-ssDNA complexes determined by other methods. The data are incompatible with models in which SSB is displaced after functioning transiently in the formation of recA-ssDNA complexes. A continuous association of SSB with recA-ssDNA complexes may therefore be an important feature of the mechanism by which SSB stimulates recA protein promoted reactions.