Tissue engineering of the meniscus

Tissue engineering for the meniscus: a review of the literature

The menisci disperse the load at the knee joint. Removal of the menisci can lead to osteoarthritis due to the higher load placed on the underlying cartilage. If they become injured it is therefore important to replace or regenerate the meniscus to prevent the progression of osteoarthritis. Many materials have been trialled to find a scaffold that can withstand the stresses and strains across the joint without causing any adverse effects. This review looks at these materials further to clarify the current position of tissue engineering for the meniscus and to highlight the areas where further research is needed. A scaffold which can produce high quality in vivo results in everyone has not yet been found.

Tissue engineering for total meniscal substitution: animal study in sheep model--results at 12 months

The aim of the study was to investigate the use of a hyaluronic acid/polycaprolactone material for meniscal tissue engineering and to evaluate the tissue regeneration after the augmentation of the implant with expanded autologous chondrocytes. Eighteen skeletally mature sheep were treated. The animals were divided into three groups: cell-free scaffold, scaffold seeded with autologous chondrocytes, and meniscectomy alone. The implant was sutured to the capsule and to the meniscal ligament. At a 12-month gross assessment, histology and histomorphometry were used to assess the meniscus implant, knee joint, and osteoarthritis development. All implants showed excellent capsular ingrowth at the periphery. The implant gross assessment showed significant differences between cell-seeded and cell-free groups (p=0.011). The histological analysis indicated a cellular colonization throughout the implanted constructs. Avascular cartilaginous tissue formation was significantly more frequent in the cell-seeded constructs. Joint gross assessment showed that sheep treated with scaffold implantation achieved a significant higher score than those underwent meniscectomy (p<0.0005), and the Osteoarthritis Research Society International score showed that osteoarthritic changes were significantly less in the cell-seeded group than in the meniscectomy group (p=0.047), even though results were not significantly superior to those of the cell-free scaffold. Seeding of the scaffold with autologous chondrocytes increases its tissue regeneration capacity, providing a better fibrocartilaginous tissue formation. The study suggests the potential of the novel hyaluronic acid/polycaprolactone scaffold for total meniscal substitution, although this approach has to be further improved before being applied into clinical practice.

Decreased hypertrophic differentiation accompanies enhanced matrix formation in co-cultures of outer meniscus cells with bone marrow mesenchymal stromal cells

Introduction

The main objective of this study was to determine whether meniscus cells from the outer (MCO) and inner (MCI) regions of the meniscus interact similarly to or differently with mesenchymal stromal stem cells (MSCs). Previous study had shown that co-culture of meniscus cells with bone marrow-derived MSCs result in enhanced matrix formation relative to mono-cultures of meniscus cells and MSCs. However, the study did not examine if cells from the different regions of the meniscus interacted similarly to or differently with MSCs.

Methods

Human menisci were harvested from four patients undergoing total knee replacements. Tissue from the outer and inner regions represented pieces taken from one third and two thirds of the radial distance of the meniscus, respectively. Meniscus cells were released from the menisci after collagenase treatment. Bone marrow MSCs were obtained from the iliac crest of two patients after plastic adherence and in vitro culture until passage 2. Primary meniscus cells from the outer (MCO) or inner (MCI) regions of the meniscus were co-cultured with MSCs in three-dimensional (3D) pellet cultures at 1:3 ratio, respectively, for 3 weeks in the presence of serum-free chondrogenic medium containing TGF-β1. Mono-cultures of MCO, MCI and MSCs served as experimental control groups. The tissue formed after 3 weeks was assessed biochemically, histochemically and by quantitative RT-PCR.

Results

Co-culture of inner (MCI) or outer (MCO) meniscus cells with MSCs resulted in neo-tissue with increased (up to 2.2-fold) proteoglycan (GAG) matrix content relative to tissues formed from mono-cultures of MSCs, MCI and MCO. Co-cultures of MCI or MCO with MSCs produced the same amount of matrix in the tissue formed. However, the expression level of aggrecan was highest in mono-cultures of MSCs but similar in the other four groups. The DNA content of the tissues from co-cultured cells was not statistically different from tissues formed from mono-cultures of MSCs, MCI and MCO. The expression of collagen I (COL1A2) mRNA increased in co-cultured cells relative to mono-cultures of MCO and MCI but not compared to MSC mono-cultures. Collagen II (COL2A1) mRNA expression increased significantly in co-cultures of both MCO and MCI with MSCs compared to their own controls (mono-cultures of MCO and MCI respectively) but only the co-cultures of MCO:MSCs were significantly increased compared to MSC control mono-cultures. Increased collagen II protein expression was visible by collagen II immuno-histochemistry. The mRNA expression level of Sox9 was similar in all pellet cultures. The expression of collagen × (COL10A1) mRNA was 2-fold higher in co-cultures of MCI:MSCs relative to co-cultures of MCO:MSCs. Additionally, other hypertrophic genes, MMP-13 and Indian Hedgehog (IHh), were highly expressed by 4-fold and 18-fold, respectively, in co-cultures of MCI:MSCs relative to co-cultures of MCO:MSCs.

Conclusions

Co-culture of primary MCI or MCO with MSCs resulted in enhanced matrix formation. MCI and MCO increased matrix formation similarly after co-culture with MSCs. However, MCO was more potent than MCI in suppressing hypertrophic differentiation of MSCs. These findings suggest that meniscus cells from the outer-vascular regions of the meniscus can be supplemented with MSCs in order to engineer functional grafts to reconstruct inner-avascular meniscus.

Polyethylene terephthalate (PET) enhances chondrogenic differentiation of ovine meniscocytes in a hyaluronic acid/polycaprolactone scaffold in vitro

PURPOSE

The purpose of this study was to assess the effect of polyethylene terephthalate (PET) on proliferation, differentiation, and attachment of ovine meniscocytes seeded in a hyaluronic acid/polycaprolactone biomaterial (BF-1)

METHODS

BF-1 (30 % hyaluronic acid and 70 % polycaprolactone) cylinders with PET (CO-PET) or without PET, were seeded with 2 x 10(6) ovine meniscus cells. The specimens were harvested in triplets at 12 hours, seven, 14, 21 and 28 days. DNA content was measured to test proliferation, histological analysis for cell morphology, and biochemical assessment of glycosaminoglycan content and RT-PCR for type I and II collagen were used to assess differentiation, with immunohistochemistry as post-translational control. Attachment was evaluated by electronic microscopy at 28 days.

RESULTS

DNA content was consistent and equal across groups, suggesting no effect of PET on cell proliferation. However, the BF-1 CO-PET showed a higher percentage of cells with spherical morphology which is typical for a chondrocytic phenotype. This biomaterial with PET also showed a higher type II collagen mRNA expression and an eightfold higher GAG-content than the material without PET. Small amounts of type I collagen mRNA expression were present on both materials at all time points. PCR results were confirmed by immunohistochemistry.

CONCLUSION

Addition of PET to a hyaluronic acid/polycaprolactone biomaterial enhances a cartilaginous phenotype, increased type II collagen mRNA expression and a higher GAG production in ovine mensicocytes.

Meniscus repair and transplantation: a comprehensive update

Preservation of meniscal tissue is paramount for long-term joint function, especially in younger patients who are athletically active. Many studies have reported encouraging results following repair of meniscus tears for both simple longitudinal tears located in the periphery and complex multiplanar tears that extend into the central third avascular region. This operation is usually indicated in active patients who have tibiofemoral joint line pain and are less than 50 years of age. However, not all meniscus tears are repairable, especially if considerable damage has occurred. In select patients, meniscus transplantation may restore partial load-bearing meniscus function, decrease symptoms, and provide chondroprotective effects. The initial postoperative goal after both meniscus repair and transplantation is to prevent excessive weight bearing, as high compressive and shear forces can disrupt healing meniscus repair sites and transplants. Immediate knee motion and muscle strengthening are initiated the day after surgery. Variations are built into the rehabilitation protocol according to the type, location, and size of the meniscus repair, if concomitant procedures are performed, and if articular cartilage damage is present. Meniscus repairs located in the periphery heal rapidly, whereas complex multiplanar repairs tend to heal more slowly and require greater caution. The authors have reported the efficacy of the rehabilitation programs and the results of meniscus repair and transplantation in many studies.

Expanded human meniscus-derived cells in 3-D polymer-hyaluronan scaffolds for meniscus repair

Treatment options for lesions of the avascular region of the meniscus using regenerative medicine approaches based on resorbable scaffolds are rare. Recent approaches using scaffold-based techniques for tissue regeneration known from cartilage repair may be a promising treatment option for meniscal tears. The aim of the study was the investigation of meniscus matrix formation of in vitro expanded human meniscus-derived cells in a three-dimensional (3-D) bioresorbable polymer graft for meniscal repair approaches. Cultivation of the human meniscus cells was performed in a resorbable scaffold material made of polyglycolic acid (PGA) and hyaluronic acid, stabilized with fibrin glue. Cell viability and distribution of human meniscus cells in PGA-hyaluronan scaffolds were evaluated by fluorescein diacetate and propidium iodide staining. Verification of typical meniscal extracellular matrix molecules like type I and type III collagen was performed histologically, immunohistochemically and by gene expression analysis. In results, 3-D scaffold-based meniscus cultures showed high cell viability over an observational period of 21 days in PGA-hyaluronan scaffolds. On the protein level, type I collagen and proteoglycans were evident. Gene expression analysis confirmed the re-expression of meniscus-specific markers in PGA-hyaluronan scaffolds. This study demonstrated that in vitro expanded human meniscus cells allow for formation of meniscal matrix components when cultured in 3-D PGA-hyaluronan scaffolds stabilized with fibrin. These results encourage scaffold-based approaches for the treatment of meniscal lesions.

Effects of perfusion and cyclic compression on in vitro tissue engineered meniscus implants

PURPOSE

The purpose of this study was to investigate the influence of continuous perfusion and mechanical stimulation on bone marrow stromal cells seeded on a collagen meniscus implant.

METHODS

Bone marrow aspirates from 6 donors were amplified in vitro. 10(6) human BMSC were distributed on a collagen meniscus implant. Scaffolds were cultured under static conditions (control) or placed into a bioreactor system where continuous perfusion (10 ml/min) or perfusion and mechanical stimulation (8 h of 10% cyclic compression at 0.5 Hz) were administered daily. After 24 h, 7 and 14 days, cell proliferation, synthesis of procollagen I and III peptide (PIP, PIIIP), histology, and the equilibrium modulus of the constructs were analyzed.

RESULTS

Proliferation demonstrated a significant increase over time in all groups (p < 0.001). PIP synthesis was found to increase from 0.1 ± 0.0 U/ml/g protein after 24 h to 2.0 ± 0.5 (perfusion), 3.8 ± 0.3 (mechanical stimulation), and 1.8 ± 0.2 U/ml/g protein (static control, lower than perfusion and mechanical stimulation, p < 0.05). These differences were also evident after 2 weeks (2.7 ± 0.3, 4.0 ± 0.6, and 1.8 ± 0.2 U/ml/g protein, p < 0.01); PIIIP synthesis was found to increase from 0.1 ± 0.0 U/ml/g protein after 24 h to 2.9 ± 0.7 (perfusion), 3.1 ± 0.9 (mechanical stimulation), and 1.6 ± 0.3 U/ml/g protein (controls) after 1 week and remained significantly elevated under the influence of perfusion and mechanical stimulation (p < 0.01) after 2 weeks. Mechanical stimulation increased the equilibrium modulus more than static culture and perfusion after 2 weeks (24.7 ± 7.6; 12.3 ± 3.7; 15.4 ± 2.6 kPa; p < 0.02).

CONCLUSION

Biomechanical stimulation and perfusion have impact on collagen scaffolds seeded with BMSCs. Cell proliferation can be enhanced using continuous perfusion and differentiation is fostered by mechanical stimulation.

Biological strategies to enhance healing of the avascular area of the meniscus

Meniscal injuries in the vascularized peripheral part of the meniscus have a better healing potential than tears in the central avascular zone because meniscal healing principally depends on its vascular supply. Several biological strategies have been proposed to enhance healing of the avascular area of the meniscus: abrasion therapy, fibrin clot, organ culture, cell therapy, and applications of growth factors. However, data are too heterogeneous to achieve definitive conclusions on the use of these techniques for routine management of meniscal lesions. Although most preclinical and clinical studies are very promising, they are still at an experimental stage. More prospective randomised controlled trials are needed to compare the different techniques for clinical results, applicability, and cost-effectiveness.

Tension-compression loading with chemical stimulation results in additive increases to functional properties of anatomic meniscal constructs

OBJECTIVE

This study aimed to improve the functional properties of anatomically-shaped meniscus constructs through simultaneous tension and compression mechanical stimulation in conjunction with chemical stimulation.

METHODS

Scaffoldless meniscal constructs were subjected to simultaneous tension and compressive stimulation and chemical stimulation. The temporal aspect of mechanical loading was studied by employing two separate five day stimulation periods. Chemical stimulation consisted of the application of a catabolic GAG-depleting enzyme, chondroitinase ABC (C-ABC), and an anabolic growth factor, TGF-β1. Mechanical and chemical stimulation combinations were studied through a full-factorial experimental design and assessed for histological, biochemical, and biomechanical properties following 4 wks of culture.

RESULTS

Mechanical loading applied from days 10-14 resulted in significant increases in compressive, tensile, and biochemical properties of meniscal constructs. When mechanical and chemical stimuli were combined significant additive increases in collagen per wet weight (4-fold), compressive instantaneous (3-fold) and relaxation (2-fold) moduli, and tensile moduli in the circumferential (4-fold) and radial (6-fold) directions were obtained.

CONCLUSIONS

This study demonstrates that a stimulation regimen of simultaneous tension and compression mechanical stimulation, C-ABC, and TGF-β1 is able to create anatomic meniscus constructs replicating the compressive mechanical properties, and collagen and GAG content of native tissue. In addition, this study significantly advances meniscus tissue engineering by being the first to apply simultaneous tension and compression mechanical stimulation and observe enhancement of tensile and compressive properties following mechanical stimulation.

Advances in meniscal tissue engineering

Meniscal tears are the most common knee injuries and have a poor ability of healing. In the last few decades, several techniques have been increasingly used to optimize meniscal healing. Current research efforts of tissue engineering try to combine cell-based therapy, growth factors, gene therapy, and reabsorbable scaffolds to promote healing of meniscal defects. Preliminary studies did not allow to draw definitive conclusions on the use of these techniques for routine management of meniscal lesions. We performed a review of the available literature on current techniques of tissue engineering for the management of meniscal tears.

Natural/synthetic porous scaffold designs and properties for fibro-cartilaginous tissue engineering

The goal of this study was to produce and characterize the scaffolds by combining the advantages of both natural and synthetic polymers for engineering fibro-cartilaginous tissues. Porous three-dimensional composite scaffolds were produced based on glycosaminoglycans and hyaluronic acid (HYAFF11) reinforced with polycaprolactone. The mechanical properties of scaffolds were evaluated as a function of time and compared with those of scaffolds seeded with human chondrocytes (constructs) and cultured in vitro up to 6 weeks. The composite scaffolds had a porosity of 68% with interconnected macropores with average pore sizes of 200 μm, an equilibrium swelling of 350%, and a predominant elastic behavior, typical of a macromolecular gel. The composite constructs maintained chondrocyte phenotype and degraded with the deposition of macromolecules synthesized by the cells. The scaffold presented mechanical properties and the ability to dissipate energy similar to the fibro-cartilaginous tissue.

Stem cell-based meniscus tissue engineering

Knee meniscus, a fibrocartilaginous tissue, is characterized by heterogeneity in extracellular matrix (ECM) and biomechanical properties, and critical for orthopedic stability, load transmission, shock absorption, and stress distribution within the knee joint. Most damage to the meniscus cannot be effectively healed by the body due to its partial avascular nature; thus, damage caused by injury or age impairs normal knee function, predisposing patients to osteoarthritis. Meniscus tissue engineering offers a possible solution to this problem by generating replacement tissue that may be implanted into the defect site to mimic the function of natural meniscal tissue. To address this need, a multiporous, multilamellar meniscus was formed using silk protein scaffolds and stem cells. The silk scaffolds were seeded with human bone marrow stem cells and differentiated over time in chondrogenic culture in the presence of transforming growth factor-beta 3 to generate meniscus-like tissue in vitro. High cellularity along with abundant ECM leading to enhanced biomechanics similar to native tissue was found. Higher levels of collagen type I and II, sulfated glycosaminoglycans along with enhanced collagen 1-α1, aggrecan, and SOX9 gene expression further confirmed differentiation and matured cell phenotype. The results of this study are a step forward toward biomechanically competent meniscus engineering, reconstituting both form and function of the native meniscus.

Implant-assisted meniscal repair in vivo using a chondrocyte-seeded flexible PLGA scaffold

A cell-based engineered construct can be used for healing of intractable meniscal lesions. Our aims were to assess the culture conditions (static versus dynamic oscillation) and the healing capacity of the chondrocyte-seeded flexible implants in a heterotopic mouse model. Swine articular chondrocytes were labeled with PKH 26 or DiI dye and seeded onto a flexible PLGA scaffold using dynamic oscillating conditions for 24 h. Half of cell-seeded scaffolds were cultured in the same dynamic conditions, while the remaining scaffolds were cultured statically. After 7 days, scaffolds were placed between swine meniscal discs and were implanted subcutaneously in nude mice for 6 weeks. Additional constructs for assessing in vivo cell tracking were implanted for 12 weeks. Live/dead assays demonstrated labeled chondrocytes attached throughout the scaffold in both culture conditions. DNA measurements showed no significant difference between the culture conditions. A continuous fibro-cartilaginous healing tissue was observed between meniscal discs in all 12 dynamically cultured constructs and 9 of 11 statically cultured ones. There was no evidence of meniscal healing using acellular scaffold as well as in meniscal constructs lacking an implant. Both PKH 26- and DiI-labeled cells were identified along the healing interface. We conclude the chondrocyte-seeded flexible PLGA implants induce healing of meniscal discs in nude mice. Culture conditions after seeding have no apparent effects on healing.

The knee meniscus: structure-function, pathophysiology, current repair techniques, and prospects for regeneration

Extensive scientific investigations in recent decades have established the anatomical, biomechanical, and functional importance that the meniscus holds within the knee joint. As a vital part of the joint, it acts to prevent the deterioration and degeneration of articular cartilage, and the onset and development of osteoarthritis. For this reason, research into meniscus repair has been the recipient of particular interest from the orthopedic and bioengineering communities. Current repair techniques are only effective in treating lesions located in the peripheral vascularized region of the meniscus. Healing lesions found in the inner avascular region, which functions under a highly demanding mechanical environment, is considered to be a significant challenge. An adequate treatment approach has yet to be established, though many attempts have been undertaken. The current primary method for treatment is partial meniscectomy, which commonly results in the progressive development of osteoarthritis. This drawback has shifted research interest toward the fields of biomaterials and bioengineering, where it is hoped that meniscal deterioration can be tackled with the help of tissue engineering. So far, different approaches and strategies have contributed to the in vitro generation of meniscus constructs, which are capable of restoring meniscal lesions to some extent, both functionally as well as anatomically. The selection of the appropriate cell source (autologous, allogeneic, or xenogeneic cells, or stem cells) is undoubtedly regarded as key to successful meniscal tissue engineering. Furthermore, a large variation of scaffolds for tissue engineering have been proposed and produced in experimental and clinical studies, although a few problems with these (e.g., byproducts of degradation, stress shielding) have shifted research interest toward new strategies (e.g., scaffoldless approaches, self-assembly). A large number of different chemical (e.g., TGF-β1, C-ABC) and mechanical stimuli (e.g., direct compression, hydrostatic pressure) have also been investigated, both in terms of encouraging functional tissue formation, as well as in differentiating stem cells. Even though the problems accompanying meniscus tissue engineering research are considerable, we are undoubtedly in the dawn of a new era, whereby recent advances in biology, engineering, and medicine are leading to the successful treatment of meniscal lesions.

Regional and fiber orientation dependent shear properties and anisotropy of bovine meniscus

Imaging of meniscal tissue reveals an extracellular matrix comprised of collagen fibrils arranged in circumferential bundles and radially aligned tie fibers, implicating structural material anisotropy. Biochemical analyses demonstrate regional disparities of proteoglycan content throughout the meniscal body, a constituent known to affect the shearing response of fibrocartilagenous tissue. Despite this phenomenological evidence and previous mechanical testing implicating otherwise, the meniscus if often modeled as a homogeneous, transversely isotropic material with little regard for regional specificity and material properties. The aim of this investigation was to determine if shear stress response homogeneity and directionality exists in and between bovine menisci with respect to anatomical location (medial and lateral), region (anterior, central, and posterior) and fiber orientation (parallel and perpendicular). Meniscus explants were subjected to lap shear strain at 0.002 s(-1) with the circumferential collagen fibers oriented parallel or perpendicular to the loading axis. Comparisons were made using a piecewise linear elastic analysis. The toe region shear modulus was calculated from the first observed linear region, between 3% and 13% strain and the extended shear modulus was established after 80% of the maximum shear strain. The posterior region was significantly different than the central for the extended shear modulus, correlating with known proteoglycan distribution. Observed shearing anisotropy led to the use of an anisotropic hyperelastic model based on a two-fiber family composite, previously used for arterial walls. The chosen model provided an excellent fit to the sample population for each region. These data can be utilized in the advancement of finite element modeling as well as biomimetic tissue engineered constructs.

Gene Therapy for Cartilage Repair

The concept of using gene transfer strategies for cartilage repair originates from the idea of transferring genes encoding therapeutic factors into the repair tissue, resulting in a temporarily and spatially defined delivery of therapeutic molecules to sites of cartilage damage. This review focuses on the potential benefits of using gene therapy approaches for the repair of articular cartilage and meniscal fibrocartilage, including articular cartilage defects resulting from acute trauma, osteochondritis dissecans, osteonecrosis, and osteoarthritis. Possible applications for meniscal repair comprise meniscal lesions, meniscal sutures, and meniscal transplantation. Recent studies in both small and large animal models have demonstrated the applicability of gene-based approaches for cartilage repair. Chondrogenic pathways were stimulated in the repair tissue and in osteoarthritic cartilage using genes for polypeptide growth factors and transcription factors. Although encouraging data have been generated, a successful translation of gene therapy for cartilage repair will require an ongoing combined effort of orthopedic surgeons and of basic scientists.

Stem/progenitor cells in closed suction drainage fluid after hip arthroplasty

BACKGROUND AND PURPOSE

Drainage after surgery is commonly used, and the contents are generally discarded as clinical waste. We analyzed closed suction drainage fluid from hip arthroplasty patients to determine whether any multipotent stem cells were present that could be used as a source of cells for tissue regeneration.

METHODS

Drainage fluid was obtained from 14 patients after hip arthroplasty on the day of surgery, the next day, and 2 days after surgery. Peripheral blood and bone marrow from the iliac crest were also obtained from the same patients during surgery. These samples were examined using regular flow cytometric profiling, and we performed quantitative immunoassays of stromal-derived factor-1 (SDF1) levels in the plasma. Mononuclear cells (MNCs) from these samples were also isolated and cultured. Fibroblastic adherent cells from MNC fractions were cultured in an osteogenic and a chondrogenic differentiation medium and were then evaluated for multipotentency.

RESULTS AND INTERPRETATION

Fibroblastic adherent cells were isolated from the mononuclear cell fraction of bone marrow and drainage fluid on the day of surgery, but they were not present in either the mononuclear cell fraction of the peripheral blood or the drainage fluid on the next day and 2 days after surgery. The cells from the drainage fluid on the day of surgery could differentiate in vitro into osteogenic and chondrogenic cells. SDF1 was elevated on the day of surgery, while CXCR4 was elevated on that day and the next day. This suggests that locally-induced SDF1 contributes to the mobilization of circulating CXCR4-positive cells. These results show that the drainage fluid collected on the day of surgery contains stem/progenitor cells that could be used for autologous cell-based therapy.

Multilayered silk scaffolds for meniscus tissue engineering

Removal of injured/damaged meniscus, a vital fibrocartilaginous load-bearing tissue, impairs normal knee function and predisposes patients to osteoarthritis. Meniscus tissue engineering solution is one option to improve outcomes and relieve pain. In an attempt to fabricate knee meniscus grafts three layered wedge shaped silk meniscal scaffold system was engineered to mimic native meniscus architecture. The scaffolds were seeded with human fibroblasts (outside) and chondrocytes (inside) in a spatial separated mode similar to native tissue, in order to generate meniscus-like tissue in vitro. In chondrogenic culture in the presence of TGF-b3, cell-seeded constructs increased in cellularity and extracellular matrix (ECM) content. Histology and Immunohistochemistry confirmed maintenance of chondrocytic phenotype with higher levels of sulfated glycosaminoglycans (sGAG) and collagen types I and II. Improved scaffold mechanical properties along with ECM alignment with time in culture suggest this multiporous silk construct as a useful micro-patterned template for directed tissue growth with respect to form and function of meniscus-like tissue.

Analysis of frictional behavior and changes in morphology resulting from cartilage articulation with porous polyurethane foams

Porous polyurethane foams (PUR) have been extensively evaluated as meniscal replacement materials and show great promise enabling infiltration of cells and fibrocartilage formation in vivo. Similar to most materials, PUR demonstrates progressive degeneration of opposing cartilage; however, the damage mechanism is impossible to determine because no information exists on the frictional properties of PUR-cartilage interfaces. The goals of this study were to characterize the frictional behavior of a cartilage-PUR interface across a range of articulating conditions and assess the resulting morphological changes to the cartilage surface following articulation. Articular cartilage was oscillated against PUR or stainless steel using phosphate-buffered saline (PBS) and synovial fluid as lubricants. Following friction testing, cartilage and PUR samples were analyzed with environmental scanning electron microscopy and histological staining to determine changes in tissue morphology. Stribeck-surface analysis demonstrated distinct lubrication modes; however, boundary mode lubrication was dominant in cartilage-PUR interfaces and the low-friction pressure-borne lubrication mechanism present in native joints was absent. Microscopy noted obvious wear, with disruption of the collagen architecture and concomitant proteoglycan loss in cartilage articulated against PUR. These data collectively point to the importance of frictional properties as design parameters for implants and materials for soft tissue replacement.

Engineering orthopedic tissue interfaces

While a wide variety of approaches to engineering orthopedic tissues have been proposed, less attention has been paid to the interfaces, the specialized areas that connect two tissues of different biochemical and mechanical properties. The interface tissue plays an important role in transitioning mechanical load between disparate tissues. Thus, the relatively new field of interfacial tissue engineering presents new challenges--to not only consider the regeneration of individual orthopedic tissues, but also to design the biochemical and cellular composition of the linking tissue. Approaches to interfacial tissue engineering may be distinguished based on if the goal is to recreate the interface itself, or generate an entire integrated tissue unit (such as an osteochondral plug). As background for future efforts in engineering orthopedic interfaces, a brief review of the biology and mechanics of each interface (cartilage-bone, ligament-bone, meniscus-bone, and muscle-tendon) is presented, followed by an overview of the state-of-the-art in engineering each tissue, including advances and challenges specific to regenerating the interfaces.

An acellular, allograft-derived meniscus scaffold in an ovine model

PURPOSE

The purpose of this study was to develop a meniscus scaffold that has increased porosity and maintains the native meniscus extracellular matrix in an ovine model.

METHODS

The medial menisci of skeletally mature ovine (n = 16) were harvested; half were made into meniscus scaffolds (n = 8), and half remained intact (n = 8). Intact and scaffold meniscus tissues were compared by use of histology, DNA content analysis, in vitro cellular biocompatibility assays, and ultrastructural analysis. An additional 16 knees were used to investigate the biomechanics of the intact meniscus compared with the meniscus scaffold.

RESULTS

DNA content and histology showed a significant decrease in cellular and nuclear content in the meniscus scaffold (P < .003). Biocompatibility was supported through in vitro cellular assays. Scanning electron microscopy and micro-computed tomography showed a substantial increase in porosity and pore connectivity in the meniscus scaffold compared with the intact meniscus (P < .01). There was no statistical difference between the ultimate load or elastic modulus of the intact and meniscus scaffolds.

CONCLUSIONS

In this study a meniscus scaffold was evaluated for potential clinical application as a meniscus transplant construct in an ovine model. The data showed that a decellularized meniscus scaffold with increased porosity was comparable to the intact meniscus, with an absence of in vitro cellular toxicity. Although some compositional alterations of the extracellular matrix are to be expected during processing, it is evident that many of the essential structural components remained functional with maintenance of biomechanical properties.

CLINICAL RELEVANCE

This meniscus scaffold has potential for future clinical application as a meniscus transplant construct.

Avaliação das fibras colágenas de meniscos frescos e preservados em glicerina: estudo experimental em coelhos (Oryctolagus cuniculus)

No presente estudo foi avaliado o efeito da glicerina 98% sobre as fibras colágenas, arquitetura tecidual e o tamanho de meniscos mediais de coelhos da raça Nova Zelândia. Os meniscos foram separados em três grupos: (1) Grupo MF com meniscos frescos (grupo controle), (2) Grupo MG com meniscos preservados em glicerina 98% por 30 dias, e (3) Grupo MR com meniscos preservados em glicerina 98% por 30 dias e reidratados em NaCl 0,9%, por 12 horas. Os cortes histológicos foram corados com sirius red para identificação dos tipos de colágenos e observados em microscópio de luz polarizada, avaliando-se a concentração total de colágeno Tipo I e III e a disposição das fibras. Os meniscos frescos apresentaram significativamente maior concentração de fibras colágenas Tipo I e menor concentração de fibras colágenas Tipo III que os meniscos preservados (MG e MR); isto ocorreu devido à perda de água e conseqüente redução do tamanho dos meniscos e retração das fibras colágenas dos meniscos dos Grupos MG e MR; isto pode ter feito com que as fibras Tipo I, mais espessas e em maior quantidade, se tornassem mais evidentes do que as fibras colágenas Tipo III, que são mais delgadas e frágeis (fibrilas). Nos três grupos estudados, as fibras colágenas apresentaram-se de forma circunferencial, interpostas por fibras orientadas radialmente. Entretanto, nos grupos tratados (MG e MR) foi observado, em pequenas áreas, leve desorganização das fibras colágenas, o que correspondeu a 42,8% e 14,3% dos meniscos, respectivamente. O grupo de meniscos em glicerina apresentou redução significativa (p<0,05) no tamanho em relação ao Grupo MF. No Grupo MR, 85,7% dos meniscos retornaram ao seu tamanho inicial após a reidratação. A glicerina 98% é eficaz na preservação de meniscos, mantendo o tamanho, a arquitetura estrutural, a integridade e percentagem do colágeno dos meniscos preservados semelhante à de meniscos frescos, desde que sejam reidratados em NaCl 0,9% após preservação.

Estrutura e celularidade de meniscos frescos de coelhos (Oryctolagus cuniculus) preservados em glicerina

No presente estudo foi avaliada a arquitetura tecidual, a população celular, assim como a integridade e a distribuição dos tipos celulares em meniscos frescos de coelhos e preservados em glicerina 98%. Foram analisados meniscos mediais de coelhos recém abatidos, que foram distribuídos em três grupos: o grupo MF (n=7), composto por meniscos frescos, correspondeu ao grupo controle; o grupo MG (n=7), composto por meniscos preservados em glicerina 98%, por 30 dias, e o grupo MR (n=7), por meniscos preservados em glicerina 98% e reidratados em NaCl 0,9%, por 12 horas. Em todos os meniscos foram identificados e quantificados os diferentes tipos celulares: fibroblastos/fibrócitos e condrócitos. A população celular foi estatisticamente semelhante nos três grupos de meniscos, sendo que os meniscos preservados, grupos MG e MR, apresentaram menor intensidade de coloração e retração das fibras colágenas, diminuição de volume e maior intensidade de coloração dos núcleos (condensação da cromatina), em relação aos meniscos frescos (MF), caracterizando o fenômeno de lise celular. A matriz fibrocartilaginosa dos meniscos preservados revelou- se bem preservada mantendo a arquitetura tecidual dos meniscos. Conclui-se que a glicerina 98% é uma opção de meio de preservação para meniscos objetivando aloenxerto, com matriz colágena desvitalizada.

Generation and characterization of a human acellular meniscus scaffold for tissue engineering

Meniscus tears are frequent indications for arthroscopic evaluation which can result in partial or total meniscectomy. Allografts or synthetic meniscus scaffolds have been used with varying success to prevent early degenerative joint disease in these cases. Problems related to reduced initial and long-term stability, as well as immunological reactions prevent widespread clinical use so far. Therefore, the aim of this study was to develop a new construct for tissue engineering of the human meniscus based on an acellular meniscus allograft. Human menisci (n = 16) were collected and acellularized using the detergent sodium dodecyl sulfate as the main ingredient or left untreated as control group. These acellularized menisci were characterized biomechanically using a repetitive ball indentation test (Stiffness N/mm, residual force N, relative compression force N) and by histological (hematoxylin-eosin, phase-contrast) as well as immunohistochemical (collagen I, II, VI) investigation. The processed menisci histologically appeared cell-free and had biomechanical properties similar to the intact meniscus samples (p > 0.05). The collagen fiber arrangement was not altered, according to phase-contrast microscopy and immunohistochemical labeling. The removal of the immunogenic cell components combined with the preservation of the mechanically relevant parts of the extracellular matrix could make these scaffolds ideal implants for future tissue engineering of the meniscus.

Enhancement of meniscal repair in the avascular zone using mesenchymal stem cells in a porcine model

We hypothesised that meniscal tears treated with mesenchymal stem cells (MSCs) together with a conventional suturing technique would show improved healing compared with those treated by a conventional suturing technique alone. In a controlled laboratory study 28 adult pigs (56 knees) underwent meniscal procedures after the creation of a radial incision to represent a tear. Group 1 (n = 9) had a radial meniscal tear which was left untreated. In group 2 (n = 19) the incision was repaired with sutures and fibrin glue and in group 3, the experimental group (n = 28), treatment was by MSCs, suturing and fibrin glue. At eight weeks, macroscopic examination of group 1 showed no healing in any specimens. In group 2 no healing was found in 12 specimens and incomplete healing in seven. The experimental group 3 had 21 specimens with complete healing, five with incomplete healing and two with no healing. Between the experimental group and each of the control groups this difference was significant (p < 0.001). The histological and macroscopic findings showed that the repair of meniscal tears in the avascular zone was significantly improved with MSCs, but that the mechanical properties of the healed menisci remained reduced.

Characterization of esterified hyaluronan-gelatin polymer composites suitable for chondrogenic differentiation of mesenchymal stem cells

Composite scaffolds of homogeneously mixed esterified hyaluronan (HY) and gelatin (G) were manufactured with variable component compositions (HY100%; HY95%/G5%; HY70%/G30%). The goals of this study were to analyze the produced composite scaffolds using physical and chemical methods, for example, scanning electron microscopy, IR-spectroscopy, water contact angle, protein assay, and tensile testing as well as to assess the effects of adding gelatin to the composite scaffolds on attachment, proliferation, and chondrogenic differentiation of human mesenchymal stem cells. Numbers of attached cells were significantly higher on the composite material compared to pure hyaluronan at different time points of two-dimensional or three-dimensional cell culture (p< 0.02). In composite scaffolds, a significantly greater amount of cartilage-specific extracellular matrix components was deposited after 28 days in culture (glycosaminoglycan: p < 0.001; collagen: p < 0.001) as compared with 100% hyaluronan scaffolds. Additionally, gelatin-containing composite scaffolds displayed stronger promotion of collagen type II expression than pure hyaluronan scaffolds. The mechanism, based on which gelatin influences cell adhesion, was examined. The effect was inhibited by collagenase treatment of the composites or by addition of alpha5beta1-integrin blocking antibodies to the cell suspension. In summary, the results describe the establishment of a class of composite polymer scaffolds, consisting of esterified hyaluronan and gelatin, which are potentially useful for cell-based tissue engineering approaches using mesenchymal stem cells for chondrogenic differentiation.

Anisotropic Porous Biodegradable Scaffolds for Musculoskeletal Tissue Engineering

It has been generally accepted that tissue engineered constructs should closely resemble the in-vivo mechanical and structural properties of the tissues they are intended to replace. However, most scaffolds produced so far were isotropic porous scaffolds with non-characterized mechanical properties, different from those of the native healthy tissue. Tissues that are formed into these scaffolds are initially formed in the isotropic porous structure and since most tissues have significant anisotropic extracellular matrix components and concomitant mechanical properties, the formed tissues have no structural and functional relationships with the native tissues. The complete regeneration of tissues requires a second differentiation step after resorption of the isotropic scaffold. It is doubtful if the required plasticity for this remains present in already final differentiated tissue. It would be much more efficacious if the newly formed tissues in the scaffold could differentiate directly into the anisotropic organization of the native tissues. Therefore, anisotropic scaffolds that enable such a direct differentiation might be extremely helpful to realize this goal. Up to now, anisotropic scaffolds have been fabricated using modified conventional techniques, solid free-form fabrication techniques, and a few alternative methods. In this review we present the current status and discuss the procedures that are currently being used for anisotropic scaffold fabrication.

Meniscus structure in human, sheep, and rabbit for animal models of meniscus repair

Meniscus injury is a frequently encountered clinical orthopedic issue and is epidemiologically correlated to osteoarthritis. The development of new treatments for meniscus injury is intimately related to the appropriateness of animal models for their investigation. The purpose of this study was to structurally compare human menisci to sheep and rabbit menisci to generate pertinent animal models for meniscus repair. Menisci were analyzed histologically, immunohistochemically, and by environmental scanning electron microscopy (ESEM). In all species, collagen I appeared throughout most menisci, but was absent from the inner portion of the tip in some samples. Collagen II was present throughout the inner main meniscal body, while collagen VI was found in pericellular and perivascular regions. The glycosaminoglycan-rich inner portion of menisci was greater in area for rabbit and sheep compared to human. Cells were rounded in central regions and more fusiform at the surface, with rabbit being more cellular than sheep and human. Vascular penetration in rabbit was confined to the very outermost region (1% of meniscus length), while vessels penetrated deeper into sheep and human menisci (11-15%). ESEM revealed a lamellar collagenous structure at the articulating surfaces of sheep and human menisci that was absent in rabbit. Taken together, these data suggest that the main structural features that will influence meniscus repair-cellularity, vascularity, collagen structure-are similar in sheep and human but significantly different in rabbit, motivating the development of ovine meniscus repair models.

Tissue engineering with meniscus cells derived from surgical debris

OBJECTIVE

Injuries to the avascular regions of the meniscus fail to heal and so are treated by resection of the damaged tissue. This alleviates symptoms but fails to restore normal load transmission in the knee. Tissue engineering functional meniscus constructs for re-implantation may improve tissue repair. While numerous studies have developed scaffolds for meniscus repair, the most appropriate autologous cell source remains to be determined. In this study, we hypothesized that the debris generated from common meniscectomy procedures would possess cells with potential for forming replacement tissue. We also hypothesized that donor age and the disease status would influence the ability of derived cells to generate functional, fibrocartilaginous matrix.

METHODS

Meniscus derived cells (MDCs) were isolated from waste tissue of 10 human donors (seven partial meniscectomies and three total knee arthroplasties) ranging in age from 18 to 84 years. MDCs were expanded in monolayer culture through passage 2 and seeded onto fiber-aligned biodegradable nanofibrous scaffolds and cultured in a chemically defined media. Mechanical properties, biochemical content, and histological features were evaluated over 10 weeks of culture.

RESULTS

Results demonstrated that cells from every donor contributed to increasing biochemical content and mechanical properties of engineered constructs. Significant variability was observed in outcome parameters (cell infiltration, proteoglycan and collagen content, and mechanical properties) amongst donors, but these variations did not correlate with patient age or disease condition. Strong correlations were observed between the amount of collagen deposition within the construct and the tensile properties achieved. In scaffolds seeded with particularly robust cells, construct tensile moduli approached maxima of approximately 40 MPa over the 10-week culture period.

CONCLUSIONS

This study demonstrates that cells derived from surgical debris are a potent cell source for engineered meniscus constructs. Results further show that robust growth is possible in MDCs from middle-aged and elderly patients, highlighting the potential for therapeutic intervention using autologous cells.

Transplantation of meniscus regenerated by tissue engineering with a scaffold derived from a rat meniscus and mesenchymal stromal cells derived from rat bone marrow

The purpose of this study was to assess transplantation of regenerated menisci using scaffolds from normal allogeneic menisci and bone-marrow-derived mesenchymal stromal cells (BM-MSCs) of rats. We reported that scaffolds derived from normal menisci seeded with BM-MSCs in vitro could form meniscal tissues within 4 weeks. Then, we hypothesized that our tissues could be more beneficial than allogeneic menisci regarding early maturation and chondroprotective effect. Bone marrow was aspirated from enhanced green fluorescent protein transgenic rats. BM-MSCs were isolated and seeded onto scaffolds which were prepared from Sprague-Dawley rat menisci. After 4 weeks in coculture, the tissues were transplanted to the defect of menisci. Repopulation of BM-MSCs and expression of extracellular matrices were observed in the transplanted tissues at 4 weeks after surgery. At 8 weeks, articular cartilage in the cell-free group was more damaged compared to that in the cell-seeded group or the meniscectomy group.

Stem cell based tissue engineering for meniscus repair

Defects of the meniscus greatly alter knee function and predispose the joint to degenerative changes. The purpose of this study was to test a recently developed cell-scaffold combination for the repair of a critical-size defect of the rabbit medial meniscus. A bilateral, complete resection of the pars intermedia of the medial meniscus was performed in 18 New Zealand White rabbits. A hyaluronan/gelatin composite scaffold was implanted into the defect of one knee of 6 rabbits and the contralateral defect was left untreated. Scaffolds loaded with autologous marrow-derived mesenchymal stem cells and cultured in a chondrogenic medium for 14 days were implanted in a second series of 12 rabbits. Empty scaffolds were implanted in the contralateral knees. Meniscii were harvested at 12 weeks. Untreated defects had a muted fibrous healing response. Defects treated with cell-free implants showed also predominantly fibrous tissue whereas fibrocartilage was present in some scaffolds. The cross-sectional width of the repair tissue after treatment with cell-free scaffolds was significantly greater than controls (p < 0.05). Pre-cultured implants integrated with the host tissue and 8 of 11 contained meniscus-like fibrocartilage, compared with 2 of 11 controls (p < 0.03). The mean cross-sectional width of the pre-cultured implant repair tissue was greater than controls (p < 0.004). This study demonstrates the repair of a critical size meniscal defect with a stem cell and scaffold based tissue engineering approach.

Creating a spectrum of fibrocartilages through different cell sources and biochemical stimuli

In this study a scaffoldless approach was employed with two different cell sources and biochemical stimuli to engineer a spectrum of fibrocartilages representative of the different regions of the knee meniscus. Constructs composed of 100% fibrochondrocytes (FC) or a 50:50 co-culture of fibrochondrocytes and chondrocytes (CC) were cultured in 10% fetal bovine serum medium or serum-free "chondrogenic" medium, each +/-10 ng/mL TGF-beta1 (+T). Constructs from these two cell groups and four culture conditions were cultured for 6 weeks. By varying the cell type and presence of the growth factor, GAG per dry weight of the constructs spanned that of native tissue, ranging 16-45% and 1-7% in the CC and FC groups, respectively. Collagen density was most dependent on cell type and was significantly lower than tissue values. The collagen I/II ratio could be manipulated by cell type and serum presence to span the native range, from 3.5 in the serum-free CC group to over 1,000 in the FC groups treated with serum-containing medium. Using the CC cell group in the presence of serum-free medium dramatically increased the compressive stiffness to 128 +/- 34 kPa, similar to native tissue. Similarly, serum-free medium or TGF-beta1 treatment enhanced the tensile modulus by an order of magnitude, up to 3,000 kPa. Using two cell sources and manipulating biochemical stimuli, a range of fibrocartilaginous neotissues was engineered. Fibrocartilages such as the knee meniscus are characterized by heterogeneity in matrix and functional properties, and this work demonstrates a strategy for recreating these heterogeneous tissues.

Influence of meniscectomy and meniscus replacement on the stress distribution in human knee joint

Studying the mechanics of the knee joint has direct implications in understanding the state of human health and disease and can aid in treatment of injuries. In this work, we developed an axisymmetric model of the human knee joint using finite element method, which consisted of separate parts representing tibia, meniscus and femoral, and tibial articular cartilages. The articular cartilages were modeled as three separate layers with different material characteristics: top superficial layer, middle layer, and calcified layer. The biphasic characteristic of both meniscus and cartilage layers were included in the computational model. The developed model was employed to investigate several aspects of mechanical response of the knee joint under external loading associated with the standing posture. Specifically, we studied the role of the material characteristic of the articular cartilage and meniscus on the distribution of the shear stresses in the healthy knee joint and the knee joint after meniscectomy. We further employed the proposed computational model to study the mechanics of the knee joint with an artificial meniscus. Our calculations suggested an optimal elastic modulus of about 110 MPa for the artificial meniscus which was modeled as a linear isotropic material. The suggested optimum stiffness of the artificial meniscus corresponds to the stiffness of the physiological meniscus in the circumferential direction.

Human meniscus cells express hypoxia inducible factor-1alpha and increased SOX9 in response to low oxygen tension in cell aggregate culture

In previous work we demonstrated that the matrix-forming phenotype of cultured human cells from whole meniscus was enhanced by hypoxia (5% oxygen). Because the meniscus contains an inner region that is devoid of vasculature and an outer vascular region, here we investigate, by gene expression analysis, the separate responses of cells isolated from the inner and outer meniscus to lowered oxygen, and compared it with the response of articular chondrocytes. In aggregate culture of outer meniscus cells, hypoxia (5% oxygen) increased the expression of type II collagen and SOX9 (Sry-related HMG box-9), and decreased the expression of type I collagen. In contrast, with inner meniscus cells, there was no increase in SOX9, but type II collagen and type I collagen increased. The articular chondrocytes exhibited little response to 5% oxygen in aggregate culture, with no significant differences in the expression of these matrix genes and SOX9. In both aggregate cultures of outer and inner meniscus cells, but not in chondrocytes, there was increased expression of collagen prolyl 4-hydroxylase (P4H)α(I) in response to 5% oxygen, and this hypoxia-induced expression of P4Hα(I) was blocked in monolayer cultures of meniscus cells by the hypoxia-inducible factor (HIF)-1α inhibitor (YC-1). In fresh tissue from the outer and inner meniscus, the levels of expression of the HIF-1α gene and downstream target genes (namely, those encoding P4Hα(I) and HIF prolyl 4-hydroxylase) were significantly higher in the inner meniscus than in the outer meniscus. Thus, this study revealed that inner meniscus cells were less responsive to 5% oxygen tension than were outer meniscus cells, and they were both more sensitive than articular chondrocytes from a similar joint. These results suggest that the vasculature and greater oxygen tension in the outer meniscus may help to suppress cartilage-like matrix formation.

In vitro analysis of an allogenic scaffold for tissue-engineered meniscus replacement

Scaffolds play a key role in the field of tissue engineering. Particularly for meniscus replacement, optimal scaffold properties are critical. The aim of our study was to develop a novel scaffold for replacement of meniscal tissue by means of tissue engineering. Emphasis was put on biomechanical properties comparable to native meniscus, nonimmunogenecity, and the possibility of seeding cells into and cultivating them within the scaffold (nontoxicity). For this purpose, native ovine menisci were treated in vitro in a self-developed enzymatic process. Complete cell removal was achieved and shown both histologically and electron microscopically (n = 15). Immunohistochemical reaction (MHC 1/MHC 2) was positive for native ovine meniscus and negative for the scaffold. Compared to native meniscus (25.8 N/mm) stiffness of the scaffold was significantly increased (30.2 N/mm, p < 0.05, n = 10). We determined the compression (%) of the native meniscus and the scaffold under a load of 7 N. The compression was 23% for native meniscus and 29% for the scaffold (p < 0.05, n = 10). Residual force of the scaffold was significantly lower (5.2 N vs. 4.9 N, p < 0.05, n = 10). Autologous fibrochondrocytes were needle injected and successfully cultivated within the scaffolds over a period of 4 weeks (n = 10). To our knowledge, this study is the first to remove cells and immunogenetic proteins (MHC 1/MHC 2) completely out of native meniscus and preserve important biomechanical properties. Also, injected cells could be successfully cultivated within the scaffold. Further in vitro and in vivo animal studies are necessary to establish optimal cell sources, sterilization, and seeding techniques. Cell differentiation, matrix production, in vivo remodeling of the construct, and possible immunological reactions after implantation are subject of further studies.

Genetically enhanced engineering of meniscus tissue using ex vivo delivery of transforming growth factor-beta 1 complementary deoxyribonucleic acid

To investigate the use of a scaffold seeded with genetically modified meniscal cells or mesenchymal stem cells (MSCs) for the healing of meniscal lesions, primary meniscus cells and bone marrow-derived MSCs were isolated from bovine calves and transduced with first-generation adenoviral vectors encoding green fluorescent protein, luciferase, or transforming growth factor (TGF)-beta1 complementary deoxyribonucleic acid (cDNA). The genetically modified cells were seeded in type I collagen-glycosaminoglycan (GAG) matrices and transplanted into tears of the avascular zone of bovine menisci. After 3 weeks of in vitro culture, constructs and repair tissues were analyzed histologically, biochemically, and using reverse transcriptase polymerase chain reaction. Recombinant adenovirus readily transduced meniscal cells and MSCs, and transgene expression remained high after the cells were incorporated into collagen-GAG matrices. Transfer of TGF-beta1 cDNA increased cellularitiy and the synthesis of GAG/DNA [microg/microg]. It also led to stronger staining for proteoglycans and type II collagen and enhanced expression of meniscal genes. Transplantation of the TGF-beta1 transduced constructs into meniscal lesions of the avascular zone resulted in filling of the lesions with repair tissue after 3 weeks of in vitro culture. These results indicate that TGF-beta1 cDNA delivery may affect cell-based meniscus repair approaches in vivo.

Finite Element Analysis of Meniscal Anatomical 3D Scaffolds: Implications for Tissue Engineering

Solid Free-Form Fabrication (SFF) technologies allow the fabrication of anatomical 3D scaffolds from computer tomography (CT) or magnetic resonance imaging (MRI) patients’ dataset. These structures can be designed and fabricated with a variable, interconnected and accessible porous network, resulting in modulable mechanical properties, permeability, and architecture that can be tailored to mimic a specific tissue to replace or regenerate. In this study, we evaluated whether anatomical meniscal 3D scaffolds with matching mechanical properties and architecture are beneficial for meniscus replacement as compared to meniscectomy. After acquiring CT and MRI of porcine menisci, 3D fiber-deposited (3DF) scaffolds were fabricated with different architectures by varying the deposition pattern of the fibers comprising the final structure. The mechanical behaviour of 3DF scaffolds with different architectures and of porcine menisci was measured by static and dynamic mechanical analysis and the effect of these tissue engineering templates on articular cartilage was assessed by finite element analysis (FEA) and compared to healthy conditions or to meniscectomy. Results show that 3DF anatomical menisci scaffolds can be fabricated with pore different architectures and with mechanical properties matching those of natural menisci. FEA predicted a beneficial effect of meniscus replacement with 3D scaffolds in different mechanical loading conditions as compared to meniscectomy. No influence of the internal scaffold architecture was found on articular cartilage damage. Although FEA predictions should be further confirmed by in vitro and in vivo experiments, this study highlights meniscus replacement by SFF anatomical scaffolds as a potential alternative to meniscectomy.

Porous Polymer Prosthesis for Meniscal Regeneration

Meniscus is the most commonly injured structure in the knee joint. Resection of the meniscus as well as the torn menisci is known to induce the degeneration of the articular cartilage. Replacement of the resected meniscus by allograft is limited by its availability and potential disease transmission. Artificial prostheses are being tried in an attempt to regenerate the meniscal tissue and we developed the biodegradable porous polycaprolactone(PCL) scaffold, which acts as a temporary scaffold to enable the regeneration of a new tissue in time. We report the results of rabbit implantation model. Biodegradable PCL scaffold coated with type I collagen with pores sized 100~150 +m and with compression modulus 400 kpa were fabricated by melt-molding particulate- leaching method. The molds were made using the native meniscus of the rabbit. Medial meniscus of right knee was partially removed through arthrotomy, leaving anterior 1/5 of the meniscus, after sectioning medial collateral ligament. The implant was attached to the peripheral capsule and remnant anterior meniscus with sutures. The medial meniscus of the left knee was removed and served as a control without replacement. The regenerated meniscus was harvested at 4 & 12wks after implantation. In addition to the routine histology of the tissue regenerated and remnant scaffold, junction between the normal meniscus and the regenerated tissue, and cartilage surface degeneration was observed. After 4 and 12 weeks the scaffolds, although considerable amount of the materials remained, were largely filled and covered with fibrous tissue which was assumed to be derived from synovial tissue of peripheral capsule. The tissue grossly resembling the native meniscus was maintained and spindle shaped cells with extracellular matrices were observed histologically. Neither cells with chondrocytic phenotype nor distinct cartilage matrices were observed until 12 weeks. The bonding between the regenerated tissue and the peripheral synovial capsule was firm and solid in all cases. The tissue bridges between the native meniscus and the regenerated tissue were found in 9/10 operated knees. Articular surface degeneration was not different between experimental and control groups except one case. More or less, the extrusion of the meniscus was found in almost all knees. This study revealed that meniscal replacement with PCL polymer prosthesis was feasible and led to adequate tissue formation. Long term studies on adaptive remodeling will be required.