Rationalizing the design of polymeric biomaterials

A solid-state deuterium NMR and sum-frequency generation study of the side-chain dynamics of peptides adsorbed onto surfaces

The artificial amphiphilic peptide LKalpha14 adopts a helical structure at interfaces, with opposite orientation of its leucine (L, hydrophobic) and lysine (K, hydrophilic) side chains. When peptides are adsorbed onto surfaces, different residue side chains necessarily have different proximities to the surface, depending on both their position in the helix and the composition of the surface itself. Deuterating the individual leucine residues (isopropyl-d(7)) permits the use of solid-state deuterium NMR spectroscopy as a site-specific probe of side-chain dynamics. In conjunction with sum-frequency generation as a probe of the peptide-binding face, we demonstrate that the mobility of specific leucine side chains at the interface is quantifiable in terms of their surface proximity.

Bioartificial Organ Grafts: A View at the Beginning of the Third Millennium

An immunoisolated collection of cells, which communicate and exchange essential factors, co-stimulatory hormones, as well as providing immunoprotection and immunomodulation, can be prepared, given existing scientific and medical know-how, within two decades. These "Bioartificial Organ Grafts" have advantages relative to isolated cell therapies, including beta-cell encapsulation for diabetes treatment, and xenotransplantation, which has a de facto moratorium. This paper documents that the majority of the research for the bioartificial organ grafts has been concluded, with the remaining hurdles minimum in comparison. The use of co-encapsulation and the induction of local immune-privilege will provide a more sensitive humoral hormonal response and graft survival, without systemic immunosuppression. A call for the staged implementation of bioartificial organ grafts, based on the best available medical practice, materials, tissue and technology available, is advocated. The implementation of bioartificial organ grafts can begin within the next two years, based on allografts succeeded by genetically modified human tissue, without the need to pass through a xenograft stage.

Biocompatibility of injectable chitosan-phospholipid implant systems

Injectable biomaterials are desirable therapeutic platforms due to minimal invasiveness and improved patient compliance, and are applicable in such areas as compound delivery and tissue engineering. The present work examined the biocompatibility of injectable blends composed of chitosan, phospholipid and lauric aldehyde (PoLi(gel)-LA) or lauric chloride (PoLi(gel)-LCl). In vitro cytotoxicity was evaluated in L929 and HeLa cell lines. Both blends resulted in acceptable biocompatibility, although greater cell viability was seen with PoLi(gel)-LA. In vivo biocompatibility was investigated in healthy CD-1 mice. Subcutaneous injection of the PoLi(gel)-LA blend caused no local or systemic toxicities over a four-week period while the PoLi(gel)-LCl caused immediate local toxicity. Mice injected intraperitoneally with PoLi(gel)-LA did not show physical or behavioural alterations, and body weight changes did not differ from control animals. Furthermore, histological examination of spleen and liver showed unaltered morphology. Interleukin-6 levels in mice injected with PoLi(gel)-LA did not differ from levels of control animals (6.91+/-3.61 pg/mL versus 6.92+/-5.02 pg/mL, respectively). Biodegradation occurred progressively, with 7.4+/-5.02% of the original injected mass remaining after four weeks. Results obtained herein establish the biocompatibility of PoLi(gel)-LA and indicate its potential for use in various localized therapeutic applications.

Development of polycaprolactone/chitosan blend porous scaffolds

Polycaprolactone (PCL) and chitosan were blended to fabricate porous scaffolds for tissue-engineering applications by employing a concentrated acetic acid solution as solvent and salt particles as porogen. These scaffolds showed well-controlled and interconnected porous structures. The pore size and porosity of the scaffolds could be effectively modulated by selecting appropriate amounts and sizes of porogen. The results obtained from compressive mechanical measurements indicated that PCL/chitosan could basically retain their strength in their dry state compared to individual components. In a hydrated state, their compressive stress and modulus could be still well maintained even though the weight ratio of chitosan reached around 50 wt%.

Improvement of the Mechanical Properties of Calcium Phosphate Bone Substitutes by Polycaprolactone Infiltration

In this study we show that mechanical properties of bioceramic scaffolds can be significantly improved by repeated infiltration with a low-viscosity polycaprolactone solution. Biphasic calcium phosphate (BCP: 70% hydroxyapatite, 30% β-tricalcium phosphate) scaffolds characterized by a bimodal pore size distribution and a global porosity of 70% have been chosen as starting materials. Polymer content in the ceramic scaffold was varied so that an inorganic/organic ratio close to that of bone may be achieved. Work of fracture at maximum stress was 36 J/m2 for the ceramic scaffold alone and reached 127 J/m2 for the 8-times infiltrated samples. These results are superior to the ones previously obtained with polycaprolactone infiltrated alumina due to higher micropore content. We show that during bending tests, polycaprolactone phase formed fibrils while the crack propagated. Crack bridging by polycaprolactone ensured the integrity of the composite once the ceramic scaffold was broken and directly involved in the composite toughening. Because of its composition, microstructure and mechanical behavior of this kind composite can be an interesting candidate for bone substitution.

Computational and functional evaluation of a microfluidic blood flow device

The development of microfluidic devices supporting physiological blood flow has the potential to yield biomedical technologies emulating human organ function. However, advances in this area have been constrained by the fact that artificial microchannels constructed for such devices need to achieve maximum chemical diffusion as well as hemocompatibility. To address this issue, we designed an elastomeric microfluidic flow device composed of poly (dimethylsiloxane) to emulate the geometry and flow properties of the pulmonary microcirculation. Our chip design is characterized by high aspect ratio (width > height) channels in an orthogonally interconnected configuration. Finite element simulations of blood flow through the network design chip demonstrated that the apparent pressure drop varied in a linear manner with flow rate. For simulated flow rates <250 mul min, the simulated pressure drop was <2000 Pa, the flow was laminar, and hemolysis was minimal. Hemolysis rate, assayed in terms of [total plasma hemoglobin (TPH) (sample - control)/(TPH control)] during 6 and 12 hour perfusions at 250 mul/min, was <5.0% through the entire period of device perfusion. There was no evidence of microscopic thrombus at any channel segment or junction under these perfusion conditions. We conclude that a microfluidic blood flow device possessing asymmetric and interconnected microchannels exhibits uniform flow properties and preliminary hemocompatibility. Such technology should foster the development of miniature oxygenators and similar biomedical devices requiring both a microscale reaction volume and physiological blood flow.

Bone cell responses to the composite ofRicinus communispolyurethane and alkaline phosphatase

The aim of this study was to evaluate the response of osteoblastic cells to the composite of Ricinus communis polyurethane (RCP) and alkaline phosphatase (ALP) incubated in synthetic body fluid (SBF). RCP pure (RCPp) and RCP blended with ALP 6 mg/mL polymer (RCP+ALP) were incubated in SBF for 17 days. Four groups of RCP were tested: RCPp, RCP+ALP, and RCPp and RCP+ALP incubated in SBF (RCPp/SBF and RCP+ALP/SBF). Stem cells from rat bone marrow were cultured in conditions that allowed osteoblastic differentiation on RCP discs and were evaluated: cell adhesion, culture growth, cell viability, total protein content, ALP activity, and bone-like nodule formation. Data were compared by ANOVA or Kruskal-Wallis test. The group RCP+ALP was highly cytotoxic and, therefore, was not considered here. Cell adhesion (p = 0.14), culture growth (p = 0.39), viability (p = 0.46) and total protein content (p = 0.12) were not affected by either RCP composition or incubation in SBF. ALP activity was affected (p = 0.0001) as follows: RCPp < RCPp/SBF < RCP+ALP/SBF. Bone-like nodule formation was not observed on all evaluated groups. The composite RCP+ALP prior to SBF incubation is cytotoxic and must not be considered as biomaterial, but the incorporation of ALP to the RCP followed by SBF incubation could be a useful alternative to improve the biological properties of the RCP.

Cytotoxicity of polyethyleneimine (PEI), precursor base layer of polyelectrolyte multilayer films

Polyethyleneimine (PEI) is a synthetic polymer commonly used as precursor base layer in polyelectrolyte multilayer films. However, the biological properties of this cationic macromolecule are poorly understood. The aim of this experimental investigation was to evaluate in vitro the biocompatibility of PEI towards two different human cell lines. The experimental investigation was undertaken on pure titanium (Ti) and nickel-titanium (NiTi) alloy samples with an average surface roughness of Ra=0.3microm. A biological study was undertaken at day 0 (2h after seeding), day 2, day 4 and day 7 to observe the cellular response of fibroblasts and osteoblasts cell lines in terms of morphology, adhesion (as observed by scanning electron microscopy), and viability (Mosmann's test). The results showed that PEI can be successfully deposited onto Ti or NiTi alloy, but generates a detrimental cellular response on both substrates as illustrated by a decrease of both fibroblast and osteoblast adhesion and proliferation over a 7-day culture period. These results suggest that PEI is potentially cytotoxic and may not be biocompatible enough in clinical applications using high molecular weight. As a consequence, polyelectrolyte multilayer films, which are promising in prosthesis and implantology fields, could not be coated with PEI at a high molecular weight. A lower molecular weight should be considered or a more biocompatible molecular base as precursor layer of polyelectrolyte multilayer films would be better to use for a good human bio-integration.

Strategies for the prevention of microbial biofilm formation on silicone rubber voice prostheses

Total laryngectomy, a surgical treatment for extensive cancer of larynx, which alters swallowing and respiration in patients, is followed up with a surgical voice restoration procedure comprising tracheoesophageal puncture techniques with insertion of a "voice prosthesis" to improve successful voice rehabilitation. However, microbial colonization is a major drawback of these devices. Antimicrobials are usually used to prevent the colonization of silicone rubber voice prostheses by microorganisms. However, long-term medication induces the development of resistant strains with all associated risks and the development of alternative prophylactic and therapeutic agents, including probiotics and biosurfactants, have been suggested. The inhibition of microbial growth on surfaces can also be achieved by several other techniques involving the modification of physicochemical properties of the biomaterial surface or the covalently binding of antimicrobial agents to the biomaterial surface. An overview of the different approaches investigated to date and future perspectives to reduce the frequent replacements of voice prostheses in laryngectomized patients through microbial biofilm retardation is presented and discussed.

Biotechnological approaches for the production of polyhydroxyalkanoates in microorganisms and plants - a review

The increasing effect of non-degradable plastic wastes is a growing concern. Polyhydroxyalkanoates (PHAs), macromolecule-polyesters naturally produced by many species of microorganisms, are being considered as a replacement for conventional plastics. Unlike petroleum-derived plastics that take several decades to degrade, PHAs can be completely bio-degraded within a year by a variety of microorganisms. This biodegradation results in carbon dioxide and water, which return to the environment. Attempts based on various methods have been undertaken for mass production of PHAs. Promising strategies involve genetic engineering of microorganisms and plants to introduce production pathways. This challenge requires the expression of several genes along with optimization of PHA synthesis in the host. Although excellent progress has been made in recombinant hosts, the barriers to obtaining high quantities of PHA at low cost still remain to be solved. The commercially viable production of PHA in crops, however, appears to be a realistic goal for the future.

Copolymers of pharmaceutical grade lactic acid and sebacic acid: Drug release behavior and biocompatibility

Pharmaceutical grade D,L-lactic acid, which is rather an economic source in comparison to lactide monomer, was utilized for synthesis of a series of copolymers with sebacic acid. Polymers were characterized by GPC, FTIR, NMR and DSC techniques, and formulated into blank and methotrexate (MTX) loaded microspheres by emulsion-solvent evaporation method. In vitro degradation of blank microspheres was studied by FTIR, GPC and SEM analysis. MTX loaded microspheres showed the encapsulation efficiency of 44-64% and were in the size range of 40-60 microm. These were used to study the release profile of the encapsulated drug. The release was found to be affected by the pH and buffer concentration of the release medium which was in turn revealed by solubility studies of MTX. The overall study demonstrates significance of drug as well as polymer properties on release. Biocompatibility of polymer was evaluated by injecting microspheres subcutaneously into Sprague-Dawley (SD) rat and no local histopathological abnormalities were found.

Porous polylactide/chitosan scaffolds for tissue engineering

Novel porous scaffolds were fabricated using biodegradable polylactide/chitosan blends. A combinational technique involving solvent-extracting, liquid-solid separation, and freeze-drying paths were employed. The processing parameters were optimized in order to produce desired porous scaffolds and thus obtained scaffolds showed well distributed and interconnected porous structures with controllable porosities varying from around 50-85% and regulative pore sizes being distributed within a region between 2 and 190 microm. These scaffolds exhibited remarkably improved hydrophilicity based on the measurements for their swelling index. The results obtained from in vitro incubation of scaffolds in phosphate buffered saline solutions at 37 degrees C during various periods up to 10 weeks indicated that chitosan component inside the scaffolds, on the one hand, effectively buffered the acidic degradation products of polylactide/chitosan scaffolds and on the other hand, the degradation of the scaffolds was also conspicuously delayed. These porous scaffolds maintained well-defined compressive mechanical properties and by well-blending polylactide with chitosan component, improved toughness on the resultant porous scaffolds was also observed.

Polymer surface reorientation after protein adsorption

Surface side-chain orientation changes of two polymers have been observed upon protein adsorption using sum frequency generation vibrational spectroscopy. Side-chain-deuterated poly(ethyl methacrylate) and poly(n-butyl methacrylate) were contacted with five protein solutions: albumin, fibrinogen, ubiquitin, cytochrome c, and lysozyme. The CD(3)/CD(2) symmetric stretch ratios of the surface polymer side chains in contact with these different media were compared to each other and to that of the polymer contacting air or phosphate buffered saline. The adsorption of different proteins to the surfaces resulted in polymer side-chain orientations slightly different from each other, with orientations between the air and buffer cases.

Molecular level structures of poly(n-alkyl methacrylate)s with different side chain lengths at the polymer/air and polymer/water interfaces

Sum frequency generation (SFG) vibrational spectroscopy has been successfully applied to study molecular structures of several poly(n-alkyl methacrylate)s (PAMAs) with different side chain lengths at the PAMA/air and PAMA/water interfaces. We have observed that the ester side chains from all PAMAs always dominate the interface, but the orientation information of the methyl end group on the side chains varies, depending on the length of the side chain. The contributions from methylene groups on the side chains have been evaluated, and the surface structures have been related to the surface tension of these polymers. Different water restructuring behaviors have been observed for different PAMAs. This phenomenon and its reversibility are strongly dependent on the glass transition temperature of each polymer, which is influenced by the side chain length. Detailed data fitting and analysis has been discussed.

Biodegradable Polylactide/Chitosan Blend Membranes

Biodegradable blend membranes based on polylactide and chitosan with various compositions were prepared via a two-step processing pathway. In the first step, solutions of each component were properly mixed and cast into a gelatinous membrane, and in the second step, the obtained membrane was immersed into a mixed solution for the solvent extraction followed by a drying procedure to finally generate a well-blended membrane. An acetic acid-acetone solvent system was selected for poly(DL-lactide)/chitosan membranes, and another solvent system for poly(L-lactide)/chitosan membranes consisted of acetic acid and dimethyl sulfoxide. Some processing parameters, such as the concentration of component solutions and the composition ratio of mixed solvents and extraction solvents, were optimized by primarily considering whether the directly visible phase separation occurred during the processing procedures. Morphologies of these blend membranes were viewed using SEM. It was found that the processing parameters exerted quite notable impacts on the morphology of the membranes. The hydrophilicity of membranes was examined by measuring their water contact angle and swelling index. These blend membranes were also investigated for their miscibility using IR spectra, X-ray diffractograms, TG, DSC, and dynamic mechanical analysis methods. Although the presence of phase separation at a microscopic level was detected for these membranes, pronounced interactions between components were confirmed. The obtained results shown that some membranes prepared under optimized processing conditions had a partially miscible structure.

Biocompatibility of elastin-like polymer poly(VPAVG) microparticles:in vitro andin vivo studies

Poly(L-valine-L-proline-L-alanine-L-valine-L-glycine) (VPAVG) is a new kind of proteinaceous polymer belonging to the Elastin-like family. These polymers are based on the recurrence of certain short peptide monomers that are considered as "building blocks" in the natural elastin. This smart thermoresponsive polymer has the ability to self-associate at physiological temperature to form aggregates with about 60% in water. This ability can be harnessed to prepare microparticles loaded with an active substance. The aim of this report is to evaluate, from the results of the experiment conducted, the biocompatibility of microparticles prepared from poly(VPAVG). We have studied the cytotoxic effects of microparticles, edema formation after subcutaneous injection (1 and 2.5 mg) in rats (n = 6), and also intraocular tolerance after the intravitreal injection of 2.5 mg of poly(VPAVG) microparticles into pigmented rabbits (n = 12). The polymer did not induce any cytotoxicity or nonspecific depression of cellular respiration on macrophages under the range of polymer concentrations investigated in this study (20, 30, 40, and 60 mg/mL). We observed no inflammatory response to microparticles after subcutaneous injection in the hind-paw of rats, with no significant differences between the control group (PBS) and experimental groups. Anterior and posterior segment signs were evaluated after intraocular injection of poly(VPAVG) microparticles. Only a few eyes (2/11) of the experimental group presented inflammation signs at day 28 postinjection. Nevertheless, 45% (5/11) of the eyes receiving microparticles showed tractional retinal detachment. The results observed in this work suggested certain fibroblastic activity induced by poly(VPAVG) microparticles after their intraocular injection.

Biopolymer-based biomaterials as scaffolds for tissue engineering

Biopolymers as biomaterials and matrices in tissue engineering offer important options in control of structure, morphology and chemistry as reasonable substitutes or mimics of extracellular matrix systems. These features also provide for control of material functions such as mechanical properties in gel, fiber and porous scaffold formats. The inherent biodegradability of biopolymers is important to help regulate the rate and extent of cell and tissue remodeling in vitro or in vivo. The ability to genetically redesign these polymer systems to bioengineer appropriate features to regulate cell responses and interactions is another important feature that offers both fundamental insight into chemistry-structure-function relationships as well as direct utility as biomaterials. Biopolymer matrices for biomaterials and tissue engineering can directly influence the functional attributes of tissues formed on these materials and suggest they will continue play an increasingly important role in the field.

Poly(dimethylsiloxane) thin films as biocompatible coatings for microfluidic devices: cell culture and flow studies with glial cells

Oxygen plasma treatment of poly(dimethylsiloxane) (PDMS) thin films produced a hydrophilic surface that was biocompatible and resistant to biofouling in microfluidic studies. Thin film coatings of PDMS were previously developed to provide protection for semiconductor-based microoptical devices from rapid degradation by biofluids. However, the hydrophobic surface of native PDMS induced rapid clogging of microfluidic channels with glial cells. To evaluate the various issues of surface hydrophobicity and chemistry on material biocompatibility, we tested both native and oxidized PDMS (ox-PDMS) coatings as well as bare silicon and hydrophobic alkane and hydrophilic oligoethylene glycol silane monolayer coated under both cell culture and microfluidic studies. For the culture studies, the observed trend was that the hydrophilic surfaces supported cell adhesion and growth, whereas the hydrophobic ones were inhibitive. However, for the fluidic studies, a glass-silicon microfluidic device coated with the hydrophilic ox-PDMS had an unperturbed flow rate over 14 min of operation, whereas the uncoated device suffered a loss in rate of 12%, and the native PDMS coating showed a loss of nearly 40%. Possible protein modification of the surfaces from the culture medium also were examined with adsorbed films of albumin, collagen, and fibrinogen to evaluate their effect on cell adhesion.

Solid-state NMR structural studies of peptides immobilized on gold nanoparticles

In this paper we describe solid-state NMR experiments that provide information on the structures of surface-immobilized peptides. The peptides are covalently bound to alkanethiolates that are self-assembled as monolayers on colloidal gold nanoparticles. The secondary structure of the immobilized peptides was characterized by quantifying the Ramachandran angles phi and psi. These angles were determined in turn from distances between backbone carbonyl 13C spins, measured with the double-quantum filtered dipolar recoupling with a windowless sequence experiment, and by determination of the mutual orientation of chemical shift anisotropy tensors of 13C carbonyl spins on adjacent peptide planes, obtained from the double-quantum cross-polarization magic-angle spinning spectrum. It was found that peptides composed of periodic sequences of leucines and lysines were bound along the length of the peptide sequence and displayed a tight alpha-helical secondary structure on the gold nanoparticles. These results are compared to similar studies of peptides immobilized on hydrophobic surfaces.

A new immobilisation method to arrange particles in a gel matrix by ultrasound standing waves

Ultrasonic forces may be used to manipulate particles in suspension. For example, a standing wave ultrasound (US) field applied to a suspension moves the particles toward areas of minimal acoustic pressure, where they are orderly retained creating a predictable heterogeneous distribution. This principle of ultrasonic retention of particles or cells has been applied in numerous biotechnological applications, such as mammalian cell filtering and red blood cell sedimentation. Here, a new US-based cell immobilisation technique is described that allows manipulation and positioning of cells/particles within various nontoxic gel matrices before polymerisation. Specifically, gel immobilisation was used to directly demonstrate that the viability of yeast cells arranged by an US standing wave is maintained up to 4 days after treatment. The versatility of this immobilisation method was validated using a wide range of acoustic devices. Finally, the potential biotechnological advantages of this US-controlled particle positioning method combined with gel immobilisation/encapsulation technology are discussed.

Encapsulation of drug nanoparticles in self-assembled macromolecular nanoshells

Layer-by-Layer (LbL) stepwise self-assembly of the polyelectrolytes poly(allylamine hydrochloride) and poly(styrenesulfonate) was used to create a macromolecular nanoshell around drug nanoparticles (approximately 150 nm in diameter). Dexamethasone, a steroid often used in conjugation with chemotherapy, was chosen as a model drug and was formulated into nanoparticles using a modified solvent-evaporation emulsification method. Measurement of the zeta potential (zeta-potential) after each polyelectrolyte layer was electrostatically added confirmed the successful addition of each layer. Additionally, data acquired from X-ray photon spectroscopy (XPS) indicated the presence of peaks representative of each physisorbed polyelectrolyte layer. Surface modification of the nanoshell was performed by covalently attaching poly(ethylene glycol) (PEG) with a molecular weight of 2000 to the outer surface of the nanoshell. Zeta potential measurements and XPS indicated the presence of PEG chains at the surface of the nanoshell. The polymeric nanoshell on the surface of the drug nanoparticle provides a template upon which surface modifications can be made to create a stealth or targeted drug delivery system.

Poly(ethylene glycol) enhances cell motility on protein-based poly(ethylene glycol)-polycarbonate substrates: a mechanism for cell-guided ligand remodeling

The regulation of cell motility on ligand-adsorbed poly(ethylene glycol) (PEG)-based polymeric biomaterials is governed by variables that are not well characterized. In this report, we examined keratinocyte migratory responsiveness to PEG-variant tyrosine-derived polycarbonates adsorbed with equivalent levels of the cell adhesion ligand, fibronectin. The equivalently adsorbed ligand adopted differential distributions, confirmed via atomic force microscopy, and the total number of exposed cell-binding domains (CBD), quantified through immunosorbent fluorometry, varied as a function of PEG concentration. Specifically, the CBD exposure was maximized at 4 mol % PEG and diminished at 8 mol % PEG, suggesting, based on our previous work (Tziampazis et al., Biomaterials 2000;21:511-520), that activation of cell adhesion and motility could be potentially promoted through increased CBD exposure at intermediate levels of PEG. This was confirmed through cell migration studies wherein cell speed values increased from 11 to 22 microm/h as the PEG concentration was increased from 0 to 4 mol %. Unexpectedly, however, high cell motility rates were sustained at 8 mol % PEG despite diminished levels of initial CBD exposure beyond 4 mol % PEG, suggesting that factors other than the initial CBD exposure may additionally have a role in activating cell migration at higher levels of PEG. Through studies of direct ligand mobility, cell-ligand-polymer interactions via atomic force microscopy, and CBD variation and integrin receptor roles in ligand remodeling, we offer evidence that cell motility is enhanced by a new mechanism for the regimen of higher PEG concentration: upon cell attachment and spreading, the ligand exhibits greater "slippage" at the polymer interface, and undergoes cell-engendered remodeling, which further activates cell motility, likely through enhanced exposure of hitherto encrypted sites for cell binding and signaling.

Development and characterization of biodegradable chitosan films for local delivery of Paclitaxel

Intratumoral and local drug delivery strategies have gained momentum recently as a promising modality in cancer therapy. In order to deliver paclitaxel at the tumor site in therapeutically relevant concentrations, chitosan films were fabricated. Paclitaxel could be loaded at 31% wt/wt in films, which were translucent and flexible. Physicochemical characterization of paclitaxel via thermal, spectroscopic, x-ray diffraction, and electron microscopy techniques revealed information on solid-state properties of paclitaxel as well as chitosan in films. While chitosan was in amorphous form, paclitaxel seemed to be present in both amorphous and crystalline forms in film. The polymeric dispersion of paclitaxel in poloxamer formed fibrous structures generating discontinuities in the film matrix, thereby leading to the introduction of perturbations in the packing arrangement of polymer chains. These films released only 10% to 15% of loaded paclitaxel by a burst effect under in vitro testing conditions, with lysozyme having no effect on the release. However, films softened after implantation in mice and lost integrity over time. The implantable delivery system is not only biodegradable but also well tolerated in vivo and hence, biocompatible as revealed by histological studies. The lack of formulation-induced local inflammatory responses of paclitaxel chitosan films suggests a new paradigm for localized chemotherapy based on implantable systems.

Use of Skeletal Muscle Tissue in Peripheral Nerve Repair: Review of the Literature

The management of peripheral nerve injury continues to be a major clinical challenge. The most widely used technique for bridging defects in peripheral nerves is the use of autologous nerve grafts. This technique, however, necessitates a donor nerve and corresponding deficit. Many alternative techniques have thus been developed. The use of skeletal muscle tissue as graft material for nerve repair is one example. The rationale regarding the use of the skeletal muscle tissue technique is the availability of a longitudinally oriented basal lamina and extracellular matrix components that direct and enhance regenerating nerve fibers. These factors provide superiority over other bridging methods as vein grafts or (non)degradable nerve conduits. The main disadvantages of this technique are the risk that nerve fibers can grow out of the muscle tissue during nerve regeneration, and that a donor site is necessary to harvest the muscle tissue. Despite publications on nerve conduits as an alternative for peripheral nerve repair, autologous nerve grafting is still the standard care for treatment of a nerve gap in the clinical situation; however, the use of the skeletal muscle tissue technique can be added to the surgeon's arsenal of peripheral nerve repair tools, especially for bridging short nerve defects or when traditional nerve autografts cannot be employed. This technique has been investigated both experimentally and clinically and, in this article, an overview of the literature on skeletal muscle grafts for bridging peripheral nerve defects is presented.

Structural studies of biomaterials using double-quantum solid-state NMR spectroscopy

Proteins directly control the nucleation and growth of biominerals, but the details of molecular recognition at the protein-biomineral interface remain poorly understood. The elucidation of recognition mechanisms at this interface may provide design principles for advanced materials development in medical and ceramic composites technologies. Here, we describe both the theory and practice of double-quantum solid-state NMR (ssNMR) structure-determination techniques, as they are used to determine the secondary structures of surface-adsorbed peptides and proteins. In particular, we have used ssNMR dipolar techniques to provide the first high-resolution structural and dynamic characterization of a hydrated biomineralization protein, salivary statherin, adsorbed to its biologically relevant hydroxyapatite (HAP) surface. Here, we also review NMR data on peptides designed to adsorb from aqueous solutions onto highly porous hydrophobic surfaces with specific helical secondary structures. The adsorption or covalent attachment of biological macromolecules onto polymer materials to improve their biocompatibility has been pursued using a variety of approaches, but key to understanding their efficacy is the verification of the structure and dynamics of the immobilized biomolecules using double-quantum ssNMR spectroscopy.

In vivo biocompatibility of three different chemical compositions ofRicinus communis polyurethane

Alteration in the chemical composition of a biomaterial may be undertaken to improve its biological properties. The aim of this work was to evaluate the biocompatibility of three chemical compositions of Ricinus communis polyurethane (RCP): RCPp (pure RCP), RCP + CaCO(3), and RCP +Ca(3)(PO(4))(2). RCP cylinders were surgically implanted in rabbit femurs. After 8, 12, and 16 weeks, the femurs were removed, fixed, sectioned, ground, and stained by Stevenel's blue/Alizarin red S for light microscopy and histomorphometry. The osseointegration and osseoconductivity were calculated by means of image analysis and the data were submitted to the Kruskal-Wallis test followed by Dunn's test. Osseointegration was already completed after 8 weeks on RCP + Ca(3)(PO(4))(2) because similar values were found from week 8 to 16, whereas it showed a time-dependent increase on RCPp and RCP +CaCO(3). The osseointegration was greater on RCP + Ca(3)(PO(4))(2) in all periods when compared with RCPp, and after 8 and 12 weeks when compared with RCP + CaCO(3). None of the RCP samples presented osseoconductivity. The present results showed that RCP blended with calcium phosphate improved the biocompatibility by both enhancing and accelerating its osseointegration. Based on the absence of osseoconductivity, RCP was considered to be a bioinert material.

Polyvinylalcohol three-dimensional matrices for improved long-term dynamic culture of hepatocytes

Rat hepatocytes were seeded on three-dimensional highly porous polyvinylalcohol (PVA) and aminoethyl-modified polyvinylalcohol (AE-PVA) matrices. Hepatocytes were cultured under static and dynamic conditions. The three-dimensional matrices offered an improved extracellular microenvironment for long-term (5 days) maintenance of hepatocytes, compared to reference monolayer cultures on collagen. Cellular adhesion exceeded 80% with a viability superior to 70%. The preservation of albumin secretion after 5 days of culture was two times higher for static cultures on three-dimensional matrices (18% on PVA, 13% on AE-PVA) and three times higher for dynamic three-dimensional cultures (25% PVA and AE-PVA), compared to the static two-dimensional culture on collagen film (8%). The biotransformation of ammonia into urea was also maintained throughout the culture period. The addition of the aminoethyl function demonstrated no toxicity for the hepatocyte cultures. This function could be suitable eventually to further improve the hepatocyte culture system by linking more specific adhesion molecules on the polymer surface. This study demonstrated the efficiency of polyvinylalcohol as a three-dimensional matrix coupled to a perfusion culture system, which improves extracellular conditions for hepatocyte survival and promotes preservation of long-term hepatospecific functions.

Bioplastics from microorganisms

The term 'biomaterials' includes chemically unrelated products that are synthesised by microorganisms (or part of them) under different environmental conditions. One important family of biomaterials is bioplastics. These are polyesters that are widely distributed in nature and accumulate intracellularly in microorganisms in the form of storage granules, with physico-chemical properties resembling petrochemical plastics. These polymers are usually built from hydroxy-acyl-CoA derivatives via different metabolic pathways. Depending on their microbial origin, bioplastics differ in their monomer composition, macromolecular structure and physical properties. Most of them are biodegradable and biocompatible, which makes them extremely interesting from the biotechnological point of view.

Polyelectrolyte multilayer films modulate cytoskeletal organization in chondrosarcoma cells

The aim of this study was to evaluate polyelectrolyte multilayer films as interfaces for implants. Polyelectrolyte multilayers were built up with different terminating layers by alternate deposition of oppositely charged polyelectrolytes on which chondrosarcoma (HCS-2/8) cells were grown in the presence of serum. Films formed by an increasing number of layers were investigated. The terminating layer was made of one of the following polyelectrolytes: poly-sodium-4-styrenesulfonate (PSS), poly-L-glutamic acid (PGA), poly-allylamine hydrochloride (PAH), or poly(L-lysine) (PLL). Cell viability, inflammatory response, adherence, and cytoskeletal organization were studied. Induction of interleukin-8 (IL-8) secretion was detected on PAH and PLL ending polyelectrolyte films. Early cellular adherence was enhanced with PGA, PAH, PLL, and, to a lower extent, PSS terminating layers. Adherence was independent of the number of layers constituting the films. The presence of actin filaments and vinculin focal adhesion spots was observed on PSS or PAH ending films. They were respectively partially and totally absent on PGA and PLL terminating multilayer architectures. For PLL ending films, vinculin and actin organization was clearly dependent on the number of deposited layers. The results of this study suggest that PSS ending multilayered films constitute a good interfacial micro-environment at the material surface for HCS-2/8 cells.

Cationic polyelectrolyte hydrogel fosters fibroblast spreading, proliferation, and extracellular matrix production: Implications for tissue engineering

Fibrous encapsulation is known to occur to many prosthetic implants and is thought to be due to the cells not adhering adequately to the surface. For developing new materials able to enhance cellular adhesion by mimicking extracellular matrix components, polyelectrolyte polymers, characterized by tunable surface charges, have been proposed. Here we demonstrate that panoply of cell functions over a two-dimensional substratum is influenced by surface charge. We have at first generated structurally related polyelectrolyte substrata varying in their positive surface charge amount and subsequently evaluated a variety of behaviors of human primary fibroblasts seeded on these polymers. The proportion of adherent, spreading, and proliferating cells was increased significantly on cationic hydrophilic surfaces when compared with the neutral base surface. The extent of cell spreading correlated with cytoskeleton organization as assessed using immunofluorescence techniques. In the key experiment, the presence of cationic charges on cell adhesion-resistant neutral surface increased the synthesis of collagen I and III, the release of their metabolites, and the expression of their mRNA by fibroblasts. Interestingly, the scarce collagen deposits on neutral polymer consisted, for the most part, of collagen I while collagen III was present only in traces probably due to the secretion of metalloproteinase-2 by non-adherent fibroblasts. Taken together, these results show that polyelectrolyte films may promote the attachment of fibroblast cells as well as their normal secretory phenotype. Both effects could be potentially useful in integrating soft connective tissue to the implant, decreasing the chance of its fibrous encapsulation.

Tailor-made functional surfaces: potential elastomeric biomaterials I

In the present investigation, different functional monomers, like hydroxyethyl methacrylate, acrylic acid, N-vinyl pyrrolidone and glycidyl methacrylate, have been grafted onto the surface of EPDM film (approx. 200 microm) using simultaneous photo-grafting (lambda > or = 290 nm) and cold plasma-grafting techniques, to alter the surface properties, such as hydrophilicity and, therefore, biocompatibility. Here, we have carried out simultaneous plasma-grafting, unlike the conventional post plasma-grafting. The effect of different surface grafting techniques on the degree of surface modification and resultant biocompatibility has been investigated. The chemical changes on the polymer backbone are followed from the results of attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS), which shows the peaks corresponding to the functional groups of the monomers grafted onto the film surface. The morphology of the modified surfaces was investigated using scanning electron microscopy (SEM) technique. The induced hydrophilicity and resultant cell compatibility were followed from the water contact angle measurements and in vitro human carcinoma cell adhesion/proliferation tests, respectively. All the grafted samples exhibited variable cell compatibilities depending upon the type of monomer and their degree of grafting; however, always better than the neat samples. Hydroxyethyl methacrylate and acrylic acid showed exceptionally high cell compatibility in terms of cell adhesion and proliferation.

Effect of the chemical composition of Ricinus communis polyurethane on rat bone marrow cell attachment, proliferation, and differentiation

Alterations in the chemical composition of a polymer may be undertaken to improve its biological properties. The aim of this study was to investigate the in vitro biocompatibility of Ricinus communis polyurethane (RCP) with three different chemical compositions: RCPp (pure RCP), RCP+CaCO(3), and RCP+Ca(3)(PO(4))(2). Rat bone marrow cells were cultivated under conditions that allowed osteoblastic differentiation and were evaluated for cell attachment, cell proliferation, cell morphology, total protein content, alkaline phosphatase (ALP) activity, and bonelike nodule formation. For the evaluation of attachment, cells were cultured for 4 h. After 3 days, cell morphology was evaluated. Cell proliferation was evaluated after 7 and 14 days. Total protein content and ALP activity were evaluated after 14 days. For bonelike nodule formation, cells were cultured for 21 days. Data were compared with an analysis of variance and Duncan's multiple range test when appropriate. Cell attachment and ALP activity were not affected by RCP chemical composition. Proliferation, total protein content, and bonelike nodule formation were all affected by RCP chemical composition. These results suggest that initial cell events are not affected by RCP chemical composition, whereas RCPs blended with calcium carbonate or, better yet, calcium phosphate, by favoring events that promote matrix mineralization, are more biocompatible materials.