Bent Anthracene Dimers as Versatile Building Blocks for Supramolecular Capsules

De novo approach for the synthesis of water-soluble interlocked and non-interlocked organic cages

Research on self-assembled metallosupramolecular architectures has bloomed in recent times. Analogous metal-free organic architectures with water solubility are highly challenging. We report here a unique class of triazine based immidazolium water-soluble metal-free interlocked organic cage (1), which was synthesized in a one-pot reaction without using dynamic covalent chemistry and without any chromatographic separation. An analogous non-interlocked cage (2) was also successfully achieved by steric control using different positional isomers of the building blocks.

Multi-stimuli Control over Assembly and Guest Binding in Metallo-supramolecular Hosts Based on Dithienylethene Photoswitches

It is difficult to assemble multi-component metallo-supramolecular architectures in a non-statistical fashion, which limits their development toward functional materials. Herein, we report a system of interconverting bowls and cages that are able to respond to various selective stimuli (light, ligands, anions), based on the self-assembly of a photochromic dithienylethene (DTE) ligand, L^a, with Pd^II cations. By combining the concept of “coordination sphere engineering”, relying on bulky quinoline donors, with reversible photoswitching between the ligand’s open (o-L^a) and closed (c-L^a) forms, a [Pd₂(o-L^a)₄] cage (o-C) and a [Pd₂(c-L^a)₃] bowl (c-B) were obtained, respectively. This structural rearrangement modulates the system’s guest uptake capabilities. Among three bis-sulfonate guests (G1, G2, and G3), the cage can encapsulate only the smallest (G1), while the bowl binds all of them. Bowl c-B was further used to synthesize a series of heteroleptic cages, [Pd₂L^A₃L^B], representing a motif never reported before. Additional ligands (L^c-f), with short or long arms, tune the cavity size, thus enabling or preventing guest uptake. Addition of Br^–/Ag⁺ makes it possible to change the overall charge, again triggering guest uptake and release, as well as fourth ligand de-/recomplexation. In combination, site-selective introduction of functionality and application of external stimuli lead to an intricate system of hosts with different guest preferences. A high degree of complexity is achieved through cooperativity between only a few components.

Self-assembled metallasupramolecular cages towards light harvesting systems for oxidative cyclization

Designing artificial light harvesting systems with the ability to utilize the output energy for fruitful application in aqueous medium is an intriguing topic for the development of clean and sustainable energy. We report here facile synthesis of three prismatic molecular cages as imminent supramolecular optoelectronic materials via two-component coordination-driven self-assembly of a new tetra-imidazole donor (L) in combination with 180°/120° di-platinum(ii) acceptors. Self-assembly of 180° trans-Pt(ii) acceptors A1 and A2 with L leads to the formation of cages Pt4 L 2(1a) and Pt8 L 2(2a) respectively, while 120°-Pt(ii) acceptor A3 with L gives the Pt8 L 2(3a) metallacage. PF6 - analogues (1b, 2b and 3b) of the metallacages possess a high molar extinction coefficient and large Stokes shift. 1b-3b are weakly emissive in dilute solution but showed aggregation induced emission (AIE) in a water/MeCN mixture as well as in the solid state. AIE active 2b and 3b in aqueous (90% water/MeCN mixture) medium act as donors for fabricating artificial light harvesting systems via Förster resonance energy transfer (FRET) with organic dye rhodamine-B (RhB) with high energy efficiency and good antenna effect. The metallacages 2b and 3b represent an interesting platform to fabricate new generation supramolecular aqueous light harvesting systems with high antenna effect. Finally, the harvested energy of the LHSs (2b + RhB) and (3b + RhB) was utilized successfully for efficient visible light induced photo-oxidative cross coupling cyclization of N,N-dimethylaniline (4) with a series of N-alkyl/aryl maleimides (5) in aqueous acetonitrile with dramatic enhancement in yields compared to the reactions with RhB or cages alone.

Concentration-Dependent Self-Assembly of an Unusually Large Hexameric Hydrogen-Bonded Molecular Cage

The sizes of available self-assembled hydrogen-bond-based supramolecular capsules and cages are rather limited. The largest systems have volumes of approximately 1400-2300 ų . Herein, we report a large, hexameric cage based on intermolecular amide-amide dimerization. The unusual structure with openings, reminiscent of covalently linked cages, is held together by 24 hydrogen bonds. With a diameter of 2.3 nm and a cavity volume of ∼2800 ų , the assembly is larger than any previously known capsule/cage structure relying exclusively on hydrogen bonds. The self-assembly process in chlorinated, organic solvents was found to be strongly concentration dependent, with the monomeric form prevailing at low concentrations. Additionally, the formation of host-guest complexes with fullerenes (C₆₀ and C₇₀ ) was observed.

Complexation of an Anthracene-Triptycene Nanocage Host with Fullerene Guests through CH⋅⋅⋅π Contacts

A bicyclic anthracene macrocycle containing two triptycene units at the bridgehead positions was synthesized by Ni-mediated coupling of the corresponding precursor as a cage-shaped aromatic hydrocarbon host. This cage host formed an inclusion complex with C₆₀ or C₇₀ guest in 1 : 1 ratio in solution. The association constants (K_a ) determined by the fluorescence titration method were 1.3×10⁴ and 3.3×10⁵  L mol ^-1 for the C₆₀ and C₇₀ complexes, respectively, at 298 K in toluene. DFT calculations revealed that the guest molecules were included in the middle of the cavity with several CH⋅⋅⋅π contacts. The strong affinity of the cage host for the fullerene guests and the high selectivity toward C₇₀ are discussed on the basis of spectroscopic and structural data.

Emerging Spacers-Based Ligands for Supramolecular Coordination Complexes

The design and self-assembly of supramolecular coordination complexes (SCCs) i. e., discrete cyclic metalloarchitectures such as cycles, cages, mesocates, and helicates with desired size, shape, and properties have been increasing exponentially owing to their potential applications in molecular sensors, molecular cargos, molecular recognition, and catalysis. The introduction of the organic motifs and metal complexes as a spacer provides functionality to the metalloarchitecture. This review mainly focusses on newly evolving spacer based ligands employed to yield simple to high-order metallosupramolecular assemblies using straight-forward approaches. The new spacers including corannulene, organic cyclic framework, bicyclic organic motifs, aliphatic chain, metalloligands, triarylboron, BODIPY, azaphosphatrane, phosphine, and thio/selenophosphates offer a great set of properties and in-built functionalities to the metalloarchitectures which are discussed in this review.

Electron-rich Coordination Receptors Based on Tetrathiafulvalene Derivatives: Controlling the Host-Guest Binding

The coordination-driven self-assembly methodology has emerged over the last few decades as an extraordinarily versatile synthetic tool for obtaining discrete macrocyclic or cage structures. Rational approaches using large libraries of ligands and metal complexes have allowed researchers to reach more and more sophisticated discrete structures such as interlocked, chiral, or heteroleptic cages, and some of them are designed for guest binding applications. Efforts have been notably produced in controlling host-guest affinity with, in particular, an evident interest in targeting substrate transportation and subsequent delivering. Recent accomplishments in this direction were described from functional cages which can be addressed with light, pH, or through a chemical exchange. The case of a redox-stimulation has been much less explored. In this case, the charge state of the redox-active cavity can be controlled through an applied electrical potential or introduction of an appropriate oxidizing/reducing chemical agent. Beyond possible applications in electrochemical sensing for environmental and medical sciences as well as for redox catalysis, controlling the cavity charge offers the possibility to modulate the host-guest binding affinity through electrostatic interactions, up to the point of disassembly of the host-guest complex, i.e., releasing of the guest molecule from the host cavity.This Account highlights the key studies that we carried out at Angers, related to discrete redox-active coordination-based architectures (i.e., metalla-rings, -cages, and -tweezers). These species are built upon metal-driven self-assembly between electron-rich ligands, based on the tetrathiafulvalene (TTF) moiety (as well as some of its S-rich derivatives), and various metal complexes. Given the high π-donating character of those ligands, the corresponding host structures exhibit a high electronic density on the cavity panels. This situation is favorable to bind complementary electron-poor guests, as it was illustrated with bis(pyrrolo)tetrathiafulvalene (BPTTF)-based cavities, which exhibit hosting properties for C₆₀ or tetrafluorotetracyanoquinodimethane (TCNQ-F₄). In addition to the pristine tetrathiafulvalene, which was successfully incorporated into palladium- or ruthenium-based architectures, the case of the so-called extended tetrathiafulvalene (exTTF) appears particularly fascinating. A series of related polycationic and neutral M₄L₂ ovoid containers, as well as a M₆L₃ cage, were synthesized, and their respective binding abilities for neutral and anionic guests were studied. Remarkably, such structures allow to control of the binding of the guest upon a redox-stimulation, through two distinctive processes: (i) cage disassembling or (ii) guest displacement. As an extension of this approach, metalla-assembled electron-rich tweezers were designed, which are able to trigger the guest release through an original process based on supramolecular dimerization activated through a redox stimulus. This ensemble of results illustrates the remarkable ability of electron-rich, coordination-based self-assembled cavities to bind various types of guests and, importantly, to trigger their release through a redox-stimulus.

Controlled Self-Assembly and Multistimuli-Responsive Interconversions of Three Conjoined Twin-Cages

Stimuli-responsive structural transformations between discrete coordination supramolecular architectures not only are essential to construct smart functional materials but also provide a versatile molecular-level platform to mimic the biological transformation process. We report here the controlled self-assembly of three topologically unprecedented conjoined twin-cages, i.e., one stapled interlocked Pd₁₂L₆ cage (2) and two helically isomeric Pd₆L₃ cages (3 and 4) made from the same cis-blocked palladium corners and a new bis-bidentate ligand (1). While cage 2 features three mechanically coupled cavities, cages 3 and 4 are topologically isomeric helicate-based twin-cages based on the same metal/ligand stoichiometry. Sole formation of cage 2 or a dynamic mixture of cages 3 and 4 can be controlled by changing the solvents employed during the self-assembly. Structural conversions between cages 3 and 4 can be triggered by changes in both temperature/solvent and induced-fit guest encapsulations. Well-controlled interconversion between such topologically complex superstructures may lay a solid foundation for achieving a variety of functions within a switchable system.

Visible-Light-Driven Rotation of Molecular Motors in Discrete Supramolecular Metallacycles

The organization of molecular motors in supramolecular assemblies to allow the amplification and transmission of motion and collective action is an important step toward future responsive systems. Metal-coordination-driven directional self-assembly into supramolecular metallacycles provides a powerful strategy to position several motor units in larger structures with well-defined geometries. Herein, we present a pyridyl-modified molecular motor ligand (MPY) which upon coordination with geometrically distinct di-Pt(II) acceptors assembles into discrete metallacycles of different sizes and shapes. This coordination leads to a red-shift of the absorption bands of molecular motors, making these motorized metallacycles responsive to visible light. Photochemical and thermal isomerization experiments demonstrated that the light-driven rotation of the motors in the metallacycles is similar to that in free MPY in solution. CD studies show that the helicity inversions associated with each isomerization step in the rotary cycle are preserved. To explore collective motion, the trimeric motor-containing metallacycle was aggregated with heparin through multiple electrostatic interactions, to construct a multi-component hierarchical system. SEM, TEM, and DLS measurements revealed that the photo- and thermal-responsive molecular motor units enabled selective manipulation of the secondary supramolecular aggregation process without dissociating the primary metallacycle structures. These visible-light-responsive metallacycles, with intrinsic multiple rotary motors, offer prospects for cooperative operations, dynamic hierarchical self-assembled systems, and adaptive materials.

Customized self-assembled molecules: rim adjustable coronal polygons with multiple-folds symmetry

Three desired discrete metallomacrocyclic wreaths with four-, five- and six-fold symmetry were successfully realized in a controlled fashion.

Helix-Sense-Selective Encapsulation of Helical Poly(lactic acid)s within a Helical Cavity of Syndiotactic Poly(methyl methacrylate) with Helicity Memory

We report a highly enantio- and helix-sense-selective encapsulation of helical poly(lactic acid)s (PLAs) through a unique "helix-in-helix" superstructure formation within the helical cavity of syndiotactic poly(methyl methacrylate) (st-PMMA) with a one-handed helicity memory, which enables the separation of the enantiomeric helices of the left (M)- and right (P)-handed-PLAs. The M- and P-helical PLAs with different molar masses and a narrow molar mass distribution were prepared by the ring-opening living polymerization of the optically pure l- and d-lactides, respectively, followed by end-capping of the terminal residues of the PLAs with a 4-halobenzoate and then a C₆₀ unit, giving the C₆₀-free and C₆₀-bound M- and P-PLAs. The C₆₀-free and C₆₀-bound M- and P-PLAs formed crystalline inclusion complexes with achiral st-PMMA accompanied by a preferred-handed helix induction in the st-PMMA backbone, thereby producing helix-in-helix superstructures with the same-handedness to each other. The induced helical st-PMMAs were retained after replacement with the achiral C₆₀, indicating the memory of the induced helicity of the st-PMMAs. Both the C₆₀-free and C₆₀-bound helical PLAs were enantio- and helix-sense selectively encapsulated into the helical hollow space of the optically active M- and P-st-PMMAs with the helicity memory prepared using chiral amines. The M- and P-PLAs are preferentially encapsulated within the M- and P-st-PMMA helical cavity with the same-handedness to each other, respectively, independent of the terminal units. The C₆₀-bound PLAs were more efficiently and enantioselectively trapped in the st-PMMA compared to the C₆₀-free PLAs. The enantioselectivities were highly dependent on the molar mass of the C₆₀-bound and C₆₀-free PLAs and significantly increased as the molar mass of the PLAs increased.

Design and Applications of Water-Soluble Coordination Cages

Compartmentalization of the aqueous space within a cell is necessary for life. In similar fashion to the nanometer-scale compartments in living systems, synthetic water-soluble coordination cages (WSCCs) can isolate guest molecules and host chemical transformations. Such cages thus show promise in biological, medical, environmental, and industrial domains. This review highlights examples of three-dimensional synthetic WSCCs, offering perspectives so as to enhance their design and applications. Strategies are presented that address key challenges for the preparation of coordination cages that are soluble and stable in water. The peculiarities of guest binding in aqueous media are examined, highlighting amplified binding in water, changing guest properties, and the recognition of specific molecular targets. The properties of WSCC hosts associated with biomedical applications, and their use as vessels to carry out chemical reactions in water, are also presented. These examples sketch a blueprint for the preparation of new metal-organic containers for use in aqueous solution, as well as guidelines for the engineering of new applications in water.

Self-Assembly of a Redox Active, Metallosupramolecular [Pd3 L6 ]6+ Complex Using a Rotationally Flexible Ferrocene Ligand

A new ferrocene-containing [Pd₃ (L_4EFc )₆ ]⁶⁺ (X^- )₆ (C ⋅ BF₄ and C ⋅ SbF₆ where X=BF₄ ^- or SbF₆ ^- ) self-assembled double-walled triangle has been synthesized from the known, rotationally flexible, 1,1'-bis(4-pyridylethynyl)ferrocene ligand (L_4EFc ), and characterized by ¹ H, ¹³ C and diffusion ordered (DOSY) NMR spectroscopies, high-resolution electrospray ionization mass spectrometry (HR-ESI-MS), X-ray crystallography and cyclic voltammetry (CV). The molecular structures confirmed that double-walled triangle cage systems (C ⋅ BF₄ and C ⋅ SbF₆ ) were generated. C ⋅ BF₄ was shown to interact with the anionic guest, p-toluenesulfonate. CV experiments revealed that the triangles were redox active, however addition of the guest did not influence the redox potentials.

Three host peculiarities of a cycloalkane-based micelle toward large metal-complex guests

Linear alkanes are essential building blocks for natural and artificial assemblies in water. As compared with typical, linear alkane-based micelles and recent aromatic micelles, we herein develop a cycloalkane-based micelle, consisting of bent amphiphiles with two cyclohexyl frameworks. This uncommon type of micelle, with a spherical core diameter of ~ 2 nm, forms in water in a spontaneous and quantitative manner. The cycloalkane-based, hydrophobic cavity displays peculiar host abilities as follows: (i) highly efficient uptake of sterically demanding Zn(II)-tetraphenylporphyrin and rubrene dyes, (ii) selective uptake of substituted Cu(II)-phthalocyanines and spherical nanocarbons, and (iii) uptake-induced solution-state emission of [Au(I)-dimethylpyrazolate]₃ in water. These host functions toward the large metal-complex and other guests studied herein remain unaccomplished by previously reported micelles and supramolecular containers.

Typical micelles are molecular assemblies composed of amphiphiles bearing linear alkyl chains. Herein, the authors present an uncommon type of cycloalkane-based bent amphiphile and its micelle which encapsulates large metal- complexes with high uptake efficiency, selectivity, and emissivity in water.

Nucleation of Tiny Silver Nanoparticles by Using a Tetrafacial Organic Molecular Barrel: Potential Use in Visible-Light-Triggered Photocatalysis

Coordination-driven self-assembly of discrete molecular architectures of diverse shapes and sizes has been well studied in the last three decades. Use of dynamic imine bonds for designing analogous metal-free architectures has become a growing challenge recently. This article reports an organic molecular barrel (OB4^R ) as a potential template for nucleation and stabilization of very tiny (<1.5 nm) Ag nanoparticles (AgNPs). Imine bond condensation of a rigid tetra-aldehyde with a flexible diamine followed by imine-bond reduction yielded the discrete tetragonal organic barrel (OB4^R ). The presence of a molecular pocket ornamented with eight diamine moieties gives the potential for encapsulation of silver(I). The organic barrel was finally used as a molecular vessel for the controlled nucleation of silver nanoparticles (AgNPs) with fine size tuning through binding of Ag^I ions in the confined space of the barrel followed by reduction. Transmission electron microscopy (TEM) analysis of the Ag⁰ @OB4^R composite revealed that the mean particle size is 1.44±0.16 nm. The composite material has approximately 52 wt % silver loading. The barrel-supported ultrafine AgNPs [Ag⁰ @OB4^R ] are found to be an efficient photocatalyst for facile Ullmann-type aryl-amination coupling of haloarenes at ambient temperature without using any additives. The catalyst was stable for several cycles of reuse without any agglomeration. The new composite Ag⁰ @OB4^R represents the first example of discrete organic barrel-supported AgNPs employed as a photocatalyst in Ullmann-type coupling reactions at room temperature.

Construction of Macromolecular Pinwheels Using Predesigned Metalloligands

Developing a methodology to build target structures is one of the major themes of synthetic chemistry. However, it has proven to be immensely challenging to achieve multilevel elaborate molecular architectures in a predictable way. Herein, we describe the self-assembly of a series of pinwheel-shaped starlike supramolecules through three rationally preorganized metalloligands L1-L3. The key octa-uncomplexed terpyridine (tpy) metalloligand L3, synthesized with an 8-fold Suzuki coupling reaction to metal-containing complexes, has four different types of terpyridines connected with three ⟨tpy-Ru²⁺-tpy⟩ units, making this the most subunits known so far for a preorganized module. Based on the principle of geometric complementation and the high "density of coordination sites", these metalloligands were assembled with Zn²⁺ ions to form a pinwheel-shaped star trigon P1, pentagram P2, and hexagram P3 with precisely controlled shapes in nearly quantitative yields. With molecular weights ranging from 16756 to 56053 Da and diameters of 6.7-13.6 nm, the structural composition, shape, and rigidity of these pinwheel-shaped architectures have been fully characterized by 1D and 2D (NMR), electrospray ionization mass spectrometry, traveling-wave ion mobility mass spectrometry, and transmission electron microscopy.

Controlled hierarchical self-assembly of networked coordination nanocapsules via the use of molecular chaperones

Supramolecular chaperones play an important role in directing the assembly of multiple protein subunits and redox-active metal ions into precise, complex and functional quaternary structures. Here we report that hydroxyl tailed C-alkylpyrogallol[4]arene ligands and redox-active MnII ions, with the assistance of proline chaperone molecules, can assemble into two-dimensional (2D) and/or three-dimensional (3D) networked nanocapsules. Dimensionality is controlled by coordination between the exterior of nanocapsule subunits, and endohedral functionalization within the 2D system is achieved via chaperone guest encapsulation. The tailoring of surface properties of nanocapsules via coordination chemistry is also shown as an effective method for the fine-tuning magnetic properties, and electrochemical and spectroscopic studies support that the nanocapsule is an effective homogeneous water-oxidation electrocatalyst, operating at pH 6.07 with an exceptionally low overpotential of 368 mV.

Rotaxane-Branched Dendrimers with Enhanced Photosensitization

During the past few decades, fabrication of functional rotaxane-branched dendrimers has become one of the most attractive yet challenging topics within supramolecular chemistry and materials science. Herein, we present the successful fabrication of a family of new rotaxane-branched dendrimers containing up to 21 platinum atoms and 42 photosensitizer moieties through an efficient and controllable divergent approach. Notably, the photosensitization efficiencies of these rotaxane-branched dendrimers gradually increased with the increase of dendrimer generation. For example, third-generation rotaxane-branched dendrimer PG3 revealed 13.3-fold higher ¹O₂ generation efficiency than its corresponding monomer AN. The enhanced ¹O₂ generation efficiency was attributed to the enhancement of intersystem crossing (ISC) through the simple and efficient incorporation of multiple heavy atoms and photosensitizer moieties on the axles and wheels of the rotaxane units, respectively, which has been validated by UV-visible and fluorescence techniques, time-dependent density functional theory calculations, photolysis model reactions, and apparent activation energy calculations. Therefore, we develop a new promising platform of rotaxane-branched dendrimers for the preparation of effective photosensitizers.

Enhanced cellular uptake of platinum by a tetracationic Pt(II) nanocapsule and its implications to cancer treatment

Despite the known limitations of cisplatin chemotherapy, the treatment of cancer by platinum-based drugs remains the method of choice for many oncologists. The advancement in drug delivery formulations and protocols of combined treatments provided effective tools to ameliorate the side effects of platinum-based therapies. Another approach to improve the pharmacological profiles of anticancer platinum drugs is to properly modify their structure and composition, which has produced numerous platinum complexes with improved therapeutic effect. Recently, we have demonstrated the strong anticancer potency of supramolecular nanocapsules that form by self-assembly of four bis-anthracene ligands with two metal ions, either Pt(II) or Pd(II). Herein, we focus our study on the Pt(II) nanocapsule and its uptake by two types of cancer cells, suspension cultures of HL-60 cells and the adherent cancer cells HT-29. Comparison of the platinum uptake by cancer cells treated with the nanocapsule and with cisplatin evidenced superior uptake of platinum caused by the nanocapsule, which in HT-29 and HL-60 cells prevails by 21 and 31 times, respectively. Morphological changes in the HL-60 cells induced by the Pt(II) nanocapsule were studied by transmission electron microscopy (TEM) which provided plausible explanation of the uptake results. These data corroborate also with the known nanocapsule's very high cytotoxicity, better selectivity, and lack of cross-resistance with cisplatin. Additionally, our estimations of the drug-drug interactions in combined treatments established the propensity of the nanocapsule to exert supra-additive cytotoxicity in combination with cisplatin against the bladder cancer T-24 cells. All these findings define the scope for more detailed pharmacological characterization of the presented Pt(II) nanocapsule.

An atropisomeric M2L4 cage mixture displaying guest-induced convergence and strong guest emission in water

Introduction of atropisomeric axes into a bent bispyridine ligand leads to the quantitative formation of a complex mixture of atropisomeric M2L4 cages upon treatment with metal ions. Whereas the isomer ratio of the obtained cage mixture, consisting of up to 42 isomers, is insensitive to temperature and solvent, the quantitative convergence from the mixture to a single isomer is accomplished upon encapsulation of a large spherical guest, namely fullerene C60. The observed isomerization with other guests depends largely on their size and shape (e.g., <10 and 82% convergence with planar triphenylene and bowl-shaped corannulene guests, respectively). Besides the unusual guest-induced convergence, the present cage mixture displays the strongest guest emission (Φ F = 68%) among previously reported M n L m cages and capsules, upon encapsulation of a BODIPY dye in water.

An aromatic micelle with bent pentacene-based panels: encapsulation of perylene bisimide dyes and graphene nanosheets

We herein report the quantitative formation of a new aromatic micelle from bent pentacene-based amphiphiles in water. Upon encapsulation, perylene bisimide dyes form a parallel stacked dimer and graphene nanosheets comprise few layer sheets with small lateral size.

For exploitation of a new class of aromatic micelles, we synthesized a bent pentacene-based amphiphilic molecule through Diels–Alder reaction. The amphiphiles bearing two trimethylammonium tethers assemble into a spherical aromatic micelle, with an average core diameter of 1.5 nm, in water at room temperature. The new aromatic micelle efficiently encapsulates perylene bisimide (PBI) dyes and graphene nanosheets (GNS) in water. The encapsulated PBI dyes form a parallel stacked dimer, exhibiting characteristic absorption and emission bands. In addition, the encapsulated GNS are composed of few-layer graphene sheets with an average lateral size of ∼7 nm, as confirmed by Raman spectroscopy. The resultant, aqueous host–guest complexes are stable even after three weeks in water under ambient conditions.

N-Doping of Polyaromatic Capsules: Small Cavity Modification Leads to Large Change in Host-Guest Interactions

To gain insight into the host functions of a nanocavity encircled by both polyaromatic panels and heteroatoms, nitrogen-doped polyaromatic capsules were successfully synthesized from metal ions and pyridine-embedded, bent anthracene-based ligands. The new capsules display unique host-guest interactions in the isolated cavities, which are distinct from those of the undoped analogues. Besides the inclusion of Ag⁺ ions, the large absorption change of fullerene C₆₀ and altered emission of a BODIPY dimer are observed upon encapsulation by the present hosts. Moreover, the N-doped capsule exhibits specific binding ability toward progesterone and methyltestosterone, known as a natural female and synthetic male hormone, respectively, in water.

Anisotropic Contraction of a Polyaromatic Capsule and Its Cavity-Induced Compression Effect

Anisotropic contraction of a spherical polyaromatic capsule was demonstrated through simple meta-to-ortho modification of the bent polyaromatic ligands. The resultant capsule, composed of two metal ions and four ortho-substituted ligands, possesses a spheroidal cavity (1.1 nm × 1.5 nm × 1.5 nm) fully encircled by a polyaromatic framework. One large planar or bowl-shaped molecule (e.g., porphine or sumanene) is quantitatively bound by the capsule, in which the cavity-induced compression effect causes the acceleration of the bowl-to-bowl inversion of sumanene. Temperature-dependent ¹H NMR analysis revealed that the activation energy of the inversion decreases greatly (ΔG^⧧ = -2.8 kcal mol^-1 at 318 K) upon encapsulation, whereas the opposite effect was observed in the spherical cavity of the previous polyaromatic capsule.

Cyclophane-Sustained Ultrastable Porphyrins

We report the encapsulation of free-base and zinc porphyrins by a tricyclic cyclophane receptor with subnanomolar binding affinities in water. The high affinities are sustained by the hydrophobic effect and multiple [CH···π] interactions covering large [π···π] stacking surfaces between the substrate porphyrins and the receptor. We discovered two co-conformational isomers of the 1:1 complex, where the porphyrin is orientated differently inside the binding cavity of the receptor on account of its tricyclic nature. The photophysical properties and chemical reactivities of the encapsulated porphyrins are modulated to a considerable extent by the receptor. Improved fluorescence quantum yields, red-shifted absorptions and emissions, and nearly quantitative energy transfer processes highlight the emergent photophysical enhancements. The encapsulated porphyrins enjoy unprecedented chemical stabilities, where their D/H exchange, protonation, and solvolysis under extremely acidic conditions are completely blocked. We anticipate that the ultrahigh stabilities and improved optical properties of these encapsulated porphyrins will find applications in single-molecule materials, artificial photodevices, and biomedical appliances.

Molecular Packing: Another Key Point for the Performance of Organic and Polymeric Optoelectronic Materials

ConspectusOptoelectronic material properties are governed by the whole collective of organic moieties, and these aggregate states present the characteristic performance of extended assemblies with different molecular packing, not only of single molecules themselves. Thus, controlling molecular packing is an essential issue for obtaining the optimized optical and electronic properties. It is also a great challenge because of the unclear structures and complicated intermolecular interactions, including dispersion forces, electrostatic interactions and hydrogen bonding. Moreover, upon the introduction of some external force as the stimulus source, dynamic optical properties can be achieved with the transformation of molecular packing in some cases, such as the photoinduced room temperature phosphorescence (RTP) effect, mechanochromic luminescence, the thermal treatment-dependent mechanoluminescence effect, and the optimized nonlinear optical (NLO) property achieved after electric poling. Therefore, it is essential to understand the relation between characteristics of molecular packing and the resultant optoelectronic performance at the molecular level, which becomes increasingly demanding for the further development of functional materials for their applications in organic light-emitting diodes (OLEDs), chemo- and biosensors, organic solar cells, data storage, and anticounterfeiting devices.This Account gives a summary of our research on the molecular design of optoelectronic materials, with the consideration of a molecular uniting effect in different aggregated states, such as crystalline states, thin films, and nanoparticles. Through the systematical investigation of structure-packing-performance relationships, some strategies are afforded to partially control the molecular packing via the tunable size, shape, and configuration of aromatic moieties with different electronic and steric effects, together with different types of substituents as functional units to adjust the intermolecular interactions. The utilization of π-π interactions and hydrogen bonding by rational molecular design is considered as the key point to achieve the bright emission of organic materials, including the RTP and mechanoluminescence effects. Also, the dynamic optoelectronic properties are highlighted with different kinds of stimuli, including light irradiation, mechanical force, thermal treatment, and electric field, which are mainly related to the subtle molecular motions under external force and the changeable molecular packing as the metastable state. These selected examples will not only open a window for further development of organic and polymeric optoelectronic materials by the adjustable molecular packing and noncovalent interactions, but also prompt further advances for more interesting and exciting properties.

Mechanical-Bond-Induced Exciplex Fluorescence in an Anthracene-Based Homo[2]catenane

Collisional intermolecular interactions between excited states form short-lived dimers and complexes that lead to the emergence of excimer/exciplex emission of lower energy, a phenomenon which must be differentiated from the photoluminescence (PL) arising from the monomeric molecules. Although the utilization of noncovalent bonding interactions, leading to the generation of excimer/exciplex PL, has been investigated extensively, precise control of the aggregates and their persistence at very low concentrations remains a rare phenomenon. In the search for a fresh approach, we sought to obtain exciplex PL from permanent structures by incorporating anthracene moieties into pyridinium-containing mechanically interlocked molecules. Beyond the optical properties of the anthracene moieties, their π-extended nature enforces [π···π] stacking that can overcome the Coulombic repulsion between the pyridinium units, affording an efficient synthesis of an octacationic homo[2]catenane. Notably, upon increasing the ionic strength by adding tetrabutylammonium hexafluorophosphate, the catenane yield increases significantly as a result of the decrease in Coulombic repulsions between the pyridinium units. Although the ground-state photophysical properties of the free cyclophane and the catenane are similar and show a charge-transfer band at ∼455 nm, their PL characters are distinct, denoting different excited states. The cyclophane emits at ∼562 nm (quantum yield ϕ_F = 3.6%, emission lifetime τ_s = 3 ns in MeCN), which is characteristic of a disubstituted anthracene-pyridinium linker. By contrast, the catenane displays an exciplex PL at low concentration (10^-8 M) with an emission band centered on 650 nm (ϕ_F = 0.5%, τ_s = 14 ns) in MeCN and at 675 nm in aqueous solution. Live-cell imaging performed in MIAPaCa-2 prostate cancer cells confirmed that the catenane exciplex emission can be detected at micromolar concentrations.

Construction of Supramolecular Liquid-Crystalline Metallacycles for Holographic Storage of Colored Images

Design and construction of new functionalized supramolecular coordination complexes (SCCs) via coordination-driven self-assembly strategy is highly important in supramolecular chemistry and materials science. Herein, we present a family of well-defined metallacycles decorated with mesogenic forklike dendrons through the strategy of coordination-driven self-assembly. Due to the existence of mesogenic forklike dendrons, the obtained metallacycles displayed the smectic A liquid crystal phase at room temperature while their precursors exhibited the rectangular columnar liquid crystal phase. Interestingly, by taking advantage of the electrostatic interactions between the positively charged metallacycle and the negatively charged heparin, the doping of heparin induced a significant change of the liquid-crystalline behaviors of metallacycles. More importantly, the prepared liquid-crystalline metallacycles could be further applied for holographic storage of colored images. Notably, the rhomboidal metallacycle and hexagonal metallacycle gave rise to different holographic performances although they featured a similar liquid crystal phase behavior. Therefore, this research not only provides the first successful example of supramolecular liquid-crystalline metallacycles for holographic storage of colored images but also opens a new door for supramolecular liquid-crystalline metallacycles toward advanced optical applications.

Coordination-driven self-assembly of discrete supramolecular double-metallacycles

This review comprehensively summarizes the recent advances in the coordination-driven self-assembly of discrete supramolecular double-metallacycles.