Structures of Metal-Organic Frameworks with Rod Secondary Building Units

Insights into the Solid-State Synthesis of Defect-Rich Zr-UiO-66

Metal-organic frameworks (MOFs), a new type of porous material, have shown many possible applications in gas storage and separation, biomedicine, catalysis, and so on. While most MOFs are synthesized through solvothermal synthesis where a large quantity of organic solvent is used, the green synthetic approach using a minimized amount of solvent is important to prevent irreversible environmental compacts. In this study, we successfully synthesized Zr-MOFs with SBUs (e.g., UiO-66 and MIL-140A) using a simple metal source and investigated the role of organic modulators in modulating the MOF structures during solid-state synthesis. Meanwhile, UiO-66 rich in defects synthesized via a solid-state conversion strategy shows good catalytic performance for the ring-opening of epoxides with alcohols. This work contributes to the understanding of the role of organic modulators in the solid-state synthesis of MOFs.

Dimensionality Modulates Electrical Conductivity in Compositionally Constant One-, Two-, and Three-Dimensional Frameworks

We reveal here the construction of Ni-based metal-organic frameworks (MOFs) and conjugated coordination polymers (CCPs) with different structural dimensionalities, including closely π-stacked 1D chains (Ni-1D), aggregated 2D layers (Ni-2D), and a 3D framework (Ni-3D), based on 2,3,5,6-tetraamino-1,4-hydroquinone (TAHQ) and its various oxidized forms. These materials have the same metal-ligand composition but exhibit distinct electronic properties caused by different dimensionalities and supramolecular interactions between SBUs, ligands, and structural motifs. The electrical conductivity of these materials spans nearly 8 orders of magnitude, approaching 0.3 S/cm.

Linker Deprotonation and Structural Evolution on the Pathway to MOF-74

The synthesis of MOF-74 (MOF = metal-organic framework) proceeds first through the generation of chemically and topologically distinct materials, referred to as phases, displaying exclusively carboxylate coordination, followed by further deprotonation to enable oxo coordination and MOF-74 formation. The synthesis of Mg-MOF-74 at high concentrations of linker and metal enables the stabilization and characterization of the previously unobserved, exclusively carboxylate coordinating phases. Ex situ and in situ approaches are leveraged to provide the time-resolved observation of Mg-MOF-74 synthesis and the formation of phases that precede Mg-MOF-74 formation as well as metastable phase dissolution. These data support dissolution and redeposition as the mechanism of MOF-74 formation and provide insight into the formation mechanism of MOFs with multiple linker coordination types.

Adenosine-functionalized UiO-66-NH2 to efficiently remove Pb(II) and Cr(VI) from aqueous solution: Thermodynamics, kinetics and isothermal adsorption

A new zirconium-based adsorption material (UiO-66-AMP) was prepared by modifying UiO-66-NH₂ with 5-adenosine to effectively remove Pb(II) and Cr(VI) from wastewater. The SEM, EDS, XRS and FT-IR characterization confirmed the successful synthesis of UiO-66-AMP. We conducted a sets of experiments to test the adsorption effectiveness of UiO-66-AMP for Pb(II) and Cr(VI). The maximum adsorption capacity of UiO-66-AMP for Cr(VI) (pH=2) and Pb(II) (pH=4) are 196.60 and 189.69 mg/g, respectively. The adsorption process conforms to the pseudo-second-order and Langmuir models, which indicates that the adsorption is a single-layer chemical process. Gibbs free energy (∆G) indicates that the adsorption of Pb(II) is an exothermic reaction, while the adsorption of Cr(VI) is an endothermic reaction. At the same time, the adsorbent maintains excellent adsorption capacity at least after 4 cycles. The good adsorption performance of UiO-66-AMP towards the metal ions was attributed to the surface complexation and electrostatic interactions. Therefore, the new adsorbent has obvious application prospect to remove Pb(II) and Cr(VI) from wastewater.

Design and degradation of permanently porous vitamin C and zinc-based metal-organic framework

Bioapplication is an emerging field of metal-organic frameworks (MOF) utilization, but biocompatible MOFs with permanent porosity are still a rarity in the field. In addition, biocompatibility of MOF constituents is often overlooked when designing bioMOF systems, intended for drug delivery. Herein, we present the a Zn(II) bioMOF based on vitamin C as an independent ligand (bioNICS-1) forming a three-dimensional chiral framework with permanent microporosity. Comprehensive study of structure stability in biorelavant media in static and dynamic conditions demonstrates relatively high structure resistivity, retaining a high degree of its parent specific surface area. Robustness of the 3D framework enables a slow degradation process, resulting in controllable release of bioactive components, as confirmed by kinetic studies. BioNICS-1 can thus be considered as a suitable candidate for the design of a small drug molecule delivery system, which was demonstrated by successful loading and release of urea-a model drug for topical application-within and from the MOF pores.

Enhancing the activity of metal-organic nanosheets for oxygen evolution reaction by substituent effects

Rational designing and synthesizing highly efficient oxygen evolution reaction (OER) electrocatalyst plays a key role in energy conversion. However, due to the numerous factors affecting the activity of electrocatalysis, the understanding of their catalytic mechanism is insufficient, and challenges still exist. Herein, the organic group of the metal-organic nanosheets electrocatalyst was replaced by NH₂ to CH₃ to controllable regulate the catalytic performance of OER, corresponding to the overpotential of OER reducing from 385 mV to 318 mV at 10 mA cm^-2, superior to the commercial precious metal based catalyst RuO₂. Furthermore, combining the density functional theory (DFT) and electron localization function (ELF) indicates that the type of ligands group can indirectly modulate the electronic structure of metal catalytic center and the degree of electronic localization of the metal-organic nanosheets catalysts, resulting in the change in electrocatalytic activity. This simple catalytic model is more favorable to investigate the catalytic mechanism, providing a new strategy for the development of efficient electrocatalyst.

Constructing Supramolecular Frameworks Based Imidazolate-Edge-Bridged Metallacalix[3]arenes via Hierarchical Self-Assemblies

Hierarchical self-assembly of novel supramolecular structures has obtained increasing attention. Herein we design and synthesize the palladium(II)-based molecular basket-like structures, as structural analog of metallacalix[3]arene [M3L3]3+ (M = (dmbpy)Pd, (phen)Pd; dmbpy = 4,4’-dimethyl-bipyridine; phen = 1,10-phenanthroline), by coordination-driven self-assembly from imidazolate-containing ligand [4,5-bis(2,5-dimethylthiophen-3-yl)-1H-imidazole (HL) with palladium(II) nitrate precursors (dmbpy)Pd(NO3)2 and (phen)Pd(NO3)2. The difference of the palladium(II) nitrate precursors with π-surface in complex produces variations of the two-dimensional (2-D) and three-dimensional (3-D) high-ordered supramolecular architectures, constructed by π···π packing and hydrogen bonding interactions, with metallacalixarenes as building blocks. These results provide perceptions of further exploring the hierarchical assembly of supramolecular structures based on π···π packing and multiple hydrogen bonding.

A Preinstalled Protic Cation as a Switch for Superprotonic Conduction in a Metal-Organic Framework

Metal-organic frameworks (MOFs), made from various metal nodes and organic linkers, provide diverse research platforms for proton conduction. Here, we report on the superprotonic conduction of a Pt dimer based MOF, [Pt₂(MPC)₄Cl₂Co(DMA)(HDMA)·guest] (H₂MPC, 6-mercaptopyridine-3-carboxylic acid; DMA, dimethylamine). In this framework, a protic dimethylammonium cation (HDMA⁺) is trapped inside a pore through hydrogen bonding with an MPC ligand. Proton conductivity and X-ray measurements revealed that trapped HDMA⁺ works as a preinstalled switch, where HDMA⁺ changes its relative position and forms an effective proton-conducting pathway upon hydration, resulting in more than 10⁵ times higher proton conductivity in comparison to that of the dehydrated form. Moreover, the anisotropy of single-crystal proton conductivity reveals the proton-conducting direction within the crystal. The present results offer insights into functional materials having a strong coupling of molecular dynamic motion and transport properties.

A novel trigonal bipyramidal cage-based Zn(ii)-MOF featuring two types of trinuclear clusters with high gas sorption properties

A unique trigonal bipyramidal cage-based Zn(ii)-MOF built from a linear trinuclear pin-wheel cluster and a triangular trinuclear cluster was prepared and shows a moderate gas adsorption amounts and high selectivities towards C2Hn/CH4 and C2H2/CO2.

Assembly of a rod indium–organic framework with fluorescence properties for selective sensing of Cu2+, Fe3+ and nitroaromatics in water

A chiral fluorescent In-MOF with two types of unique homochiral In–O–In helical chains was synthesized. Then it was developed as a highly sensitive fluorescence sensor for detecting Cu2+, Fe3+ and nitroaromatics in water.

Infinite building blocks for directed self-assembly of a supramolecular polyoxometalate–cyclodextrin framework for multifunctional oxidative catalysis

With evolution from polyoxometalate-based molecular building blocks to infinite building blocks (IBBs), a supramolecular polyoxometalate–cyclodextrin framework was constructed by an IBB strategy for multifunctional oxidative catalysis.

Covalent organic frameworks-based smart materials for mitigation of pharmaceutical pollutants from aqueous solution

Covalent organic frameworks (COFs) are an emergent group of crystalline porous materials that have gained incredible interest in recent years. With foreseeable controllable functionalities and structural configurations, the constructions and catalytic properties of these organic polymeric materials can be controlled to fabricate targeted materials. The specified monomer linkers and pre-designed architecture of COFs facilitate the post-synthetic modifications for introducing novel functions and useful properties. By virtue of inherent porosity, robust framework, well-ordered geometry, functionality, higher stability, and amenability to functionalization, COFs and COFs-based composites are regarded as prospective nanomaterials for environmental clean-up and remediation. This report spotlights the state-of-the-art advances and progress in COFs-based materials to efficiently mitigate pharmaceutical-based environmental pollutants from aqueous solutions. Synthesis approaches, structure, functionalization, and sustainability aspects of COFs are discussed. Moreover, the adsorptive and photocatalytic potential of COFs and their derived nanocomposites for removal and degradation of pharmaceuticals are thoroughly vetted. In addition to deciphering adsorption mechanism/isotherms, the stability, regeneratability and reproducibility are also delineated. Lastly, the outcomes are summed up, and new directions are proposed to widen the promise of COF-based smart materials in diverse fields.

Designing and Construction of Polyaromatic Group Containing Cd(II)-based Coordination Polymers for Solvent-free Strecker-type Cyanation of Acetals

In the present work, we have synthesized and characterized two novel Cd(II) coordination polymers, [Cd4(L1)4(DMF)6]n.3n(DMF) (1) and [Cd2(L2)2(DMF)3]n.2n(DMF) (2), and studied their catalytic application. They were synthesized via solvothermal reaction...

Novel bimetallic MOF derived N-doped carbon supported Ru nanoparticles for efficient reduction of nitro aromatic compounds and rhodamine B

N-doped carbon enables Ru-NC-15 to exhibit extremely high catalytic activity towards 4-nitrophenol and rhodamine B reduction.

A new 3D 8-connected Cd(ii) MOF as a potent photocatalyst for oxytetracycline antibiotic degradation

1 exhibits the best photocatalytic decomposition efficiency towards antibiotic OXY. The plausible photocatalytic mechanism has been explained with the help of the density of states calculations and Hirshfeld surface analysis.

Topological transformations in metal–organic frameworks: a prospective design route?

We apply a topological approach based on the underlying net and transformation pattern concepts as well as on the ‘supernet–subnet’ formalism to uncover mechanisms of solid-state transformations in coordination polymers and metal–organic frameworks.

Synthesis, structure, magnetic properties and thermal behaviour of Ba–MII (MII = Mn, Co, Cu, and Zn) allylmalonates

A series of Ba-MII complexes with allylmalonic acid anions [BaMII(Amal)2(H2O)3]n (MII = Mn, Co, Cu, and Zn) were synthesized. The magnetic measurements revealed slow magnetic relaxation in non-zero field (HDC = 1500 Oe) for CoII ions.

Metal-organic frameworks in pursuit of size: the development of macroscopic single crystals REMINDER: Personal invitation to contribute to Dalton Transactions - CoordNetworks

Metal-organic frameworks are versatile structures with many different applications, from the industry to the clinic. Despite multiple synthesis approaches are possible to coordinate metals and organic ligands, some common strategies...

Building a Pyrazole-Benzothiadiazole-Pyrazole Photosensitizer into Metal-Organic Frameworks for Photocatalytic Aerobic Oxidation

Charge separation plays a crucial role in regulating photochemical properties and therefore warrants consideration in designing photocatalysts. Metal-organic frameworks (MOFs) are emerging as promising candidates for heterogeneous photocatalysis due to their structural designability and tunability of photon absorption. Herein, we report the design of a pyrazole-benzothiadiazole-pyrazole organic molecule bearing a donor-acceptor-donor conjugated π-system for fast charge separation. Further attempts to integrate such a photosensitizer into MOFs afford a more effective heterogeneous photocatalyst (JNU-204). Under visible-light irradiation, three aerobic oxidation reactions involving different oxygenation pathways were achieved on JNU-204. Recycling experiments were conducted to demonstrate the stability and reusability of JNU-204 as a robust heterogeneous photocatalyst. Furthermore, we illustrate its applications in the facile synthesis of pyrrolo[2,1-a]isoquinoline-containing heterocycles, core skeletons of a family of marine natural products. JNU-204 is an exemplary MOF platform with good photon absorption, suitable band gap, fast charge separation, and extraordinary chemical stability for proceeding with aerobic oxidation reactions under visible-light irradiation.

Finely Tuning Tridentate Carboxylic Acids for the Construction of Rod Scandium Metal-Organic Frameworks with High Chemical Stability and Selective Gas Adsorption

By systematic ligand tuning for control of the secondary building units, the use of tridentate carboxylic acid to construct the rod scandium metal-organic framework NTUniv-55 (NTUniv = Nantong University) with high chemical stability and interesting selective gas adsorption was reported.

Recent advances in luminescent metal-organic frameworks and their photonic applications

In recent years, metal-organic frameworks (MOFs) have been attracting ever more interest owing to their fascinating structures and widespread applications. Among the optoelectronic materials, luminescent MOFs (LMOFs) have become one of the most attractive candidates in the fields of optics and photonics thanks to the unique characteristics of their frameworks. Luminescence from MOFs can originate from either the frameworks, mainly including organic linkers and metal ions, or the encapsulated guests, such as dyes, perovskites, and carbon dots. Here, we systematically review the recent progress in LMOFs, with an emphasis on the relationships between their structures and emission behaviour. On this basis, we comprehensively discuss the research progress and applications of multicolour emission from homogeneous and heterogeneous structures, host-guest hybrid lasers, and pure MOF lasers based on optically excited LMOFs in the field of micro/nanophotonics. We also highlight recent developments in other types of luminescence, such as electroluminescence and chemiluminescence, from LMOFs. Future perspectives and challenges for LMOFs are provided to give an outlook of this emerging field. We anticipate that this article will promote the development of MOF-based functional materials with desired performance towards robust optoelectronic applications.

Acetylene Separation by a Ca-MOF Containing Accessible Sites of Open Metal Centers and Organic Groups

Efficient separation of acetylene from a ternary acetylene-containing mixture is an important and vital task in petrochemical industry, which is difficult to achieve using a single material. Herein, a new Ca²⁺-based metal-organic framework (MOF) [Ca(dtztp)_0.5(DMA)]·2H₂O (1) was constructed using the N,O-donor ligand 2,5-di(2H-tetrazol-5-yl)terephthalic acid and the less-studied alkaline earth Ca²⁺ ions. The MOF shows a 3D honeycomb framework based on unique metal-carboxylate-azolate rod secondary building units. Owing to the presence of high-density organic hydrogen-bonding acceptors and open metal sites (OMSs), the activated MOF shows high adsorption capacity for C₂H₂ and selectivity for C₂H₂ over CO₂, C₂H₄, C₂H₆, and CH₄. Dynamic breakthrough experiments indicated the actual C₂H₂ separation potential of the MOF from binary (C₂H₂-C₂H₄ and C₂H₂-CO₂) and ternary (C₂H₂-C₂H₄-CO₂ and C₂H₂-C₂H₄-C₂H₆) mixtures. Simulations revealed that the synergistic interactions between the OMSs and N atoms in MOF and C₂H₂ molecules play an important role in the separation of C₂H₂.

[Determination of new carmine in beverages by one step rapid solid phase extraction based on metal organic framework extractant]

New coccine is an azo pigment that is widely used in food. To mitigate potential health issues arising from excessive consumption, China has issued provisions on the allowed addition limit of new coccine in food. Currently, there are certain difficulties with establishing detection methods for such trace pigments in foods; for example, preprocessing is complex and time-intensive. In addition, the low content of the target substance in the sample could be disturbed by food matrix, resulting in poor detection sensitivity. Metal organic frameworks (MOFs), as a novel class of highly efficient adsorbents, have attracted increasing attention because of their stability and large specific surface area. MOFs are porous coordination crystal structures that connect metal clusters with organic ligands via coordination. Owing to their molecule-sized pores, MOFs can be used in various fields such as adsorption, catalysis, and drug dispersion. However, at the same time, their ultra-high specific surface area also leads to ultra-low weight of the material itself; this makes it difficult to collect the material even under high-speed centrifugation. In this study, a MOF material (PCN-222) with a high specific surface area was prepared by the coordination of the carboxyl group in the porphyrin ring and metal zirconium ions. To simplify pretreatment, the nanomaterials were filled into an injection solid phase extraction device for the rapid extraction of new coccine pigments from beverages. The morphology, structure, and properties of the PCN-222 nanomaterials were studied by transmission electron microscopy, particle size analysis, X-ray single-crystal diffraction, infrared spectroscopy, and ultraviolet spectroscopy. The specific surface area of the synthesized material was 979 m2/g. A high specific surface area was conducive to the adsorption of trace target compounds. The surface charge of the material could be controlled by adjusting the pH value of the solution, which was beneficial to the selective adsorption and desorption of ionic pigments. The π-π interaction between the benzene ring of the porphyrin ring and the benzene ring of the azo pigment also promoted extraction. Thus, the extractant exhibited strong enrichment performance for the new coccine anionic pigment. The solid phase extraction conditions were optimized, and it was found that saturated adsorption capacity was achieved by filling 3 mg of extractant. The effect of pH on adsorption was also explored; the adsorption effect was the best at pH 3. In the desorption experiment, N,N-dimethylformamide at pH 11 was conducive to better elution of the target. Further elution volume studies showed that maximum recovery could be achieved by adding 3 mL of eluent. Subsequently, the sample pretreatment time was reduced to 5 min. The enriched sample was separated using a Zorbax eclipse XDB-C18 column (250 mm×4.6 mm, 5 μm), eluted with an ammonium acetate-methanol solvent system, and detected at 254 nm. Under the optimum conditions, the recoveries of the samples at high, medium, and low levels reached 99.5%-109.4%, and the relative standard deviation was less than 3%. The limit of detection (LOD, S/N=3) of this method was 0.1 μg/L and the limit of quantification (LOQ, S/N=10) was 0.3 μg/L. In the actual sample detection experiment, the detection signal of new coccine in the sample was amplified by solid phase extraction to achieve enrichment. In addition, the extraction capacity of PCN-222 remained higher than 90% after four uses, and the synthesized material could be recycled. The high precision and low detection limit indicate that the method is suitable for the enrichment and detection of trace carmine in beverages. The findings of this study will aid in the development of a new solid phase extraction technology for food safety evaluation.

Lattice-Guided Construction and Harvest of a Naturally Nonpreferred Metal-Organic Framework

Constructing metal-organic frameworks (MOFs) to have a desired structure from the given components is critical to achieve ideal MOFs with optimal properties. However, thermodynamics and/or kinetics typically impose a restriction on MOF structures. Here, we report the MOF farming concept to produce a naturally nonpreferred structure from the given components. The HKUST-1 template offers ideal places for the efficient seeding and epitaxial growth of Ga-MIL-88B that is a naturally nonpreferred structure however intentionally produced instead of the preferred Ga-MIL-68. The MOF growth on the differently shaped HKUST-1 templates (octahedral, cuboctahedral, and cubic), containing different exposed lattices, proves that a hexagonal lattice with an exposed {111} plane of HKUST-1 selectively directs the perpendicular growth of Ga-MIL-88B, owing to the lattice matching with the {001} plane of Ga-MIL-88B. The grown Ga-MIL-88B is isolated in a pure form, and the refreshed template is reused to grow additional Ga-MIL-88B.

Nanochannel {InZn}-Organic Framework with a High Catalytic Performance on CO2 Chemical Fixation and Deacetalization-Knoevenagel Condensation

The rare combination of In^III 5p and Zn^II 3d in the presence of a structure-oriented TDP^6- ligand led to a robust hybrid material of {(Me₂NH₂)[InZn(TDP)(OH₂)]·4DMF·4H₂O}_n (NUC-42) with the interlaced hierarchical nanochannels (hexagonal and cylindrical) shaped by six rows of undocumented [InZn(CO₂)₆(OH₂)] clusters, which represented the first 5p-3d nanochannel-based heterometallic metal-organic framework. With respect to the multifarious symbiotic Lewis acid-base and Brønsted acid sites in the high porous framework, the catalytic performance of activated NUC-42a upon CO₂ cycloaddition with styrene oxide was evaluated under solvent-free conditions with 1 atm of CO₂ pressure, which exhibited that the reaction could be well completed at ambient temperature within 48 h or at 60 °C within 4 h with high yield and selectivity. Moreover, because of the acidic function of metal sites and a central free pyridine in the TDP^6- ligand, deacetalization-Knoevenagel condensation of acetals and malononitrile could be efficiently facilitated by an activated sample of NUC-42a under lukewarm conditions.

Unusual Metal-Organic Framework Topology and Radiation Resistance through Neptunyl Coordination Chemistry

A Np(V) neptunyl metal-organic framework (MOF) with rod-shaped secondary building units was synthesized, characterized, and irradiated with γ rays. Single-crystal X-ray diffraction data revealed an anionic framework containing infinite helical chains of actinyl-actinyl interaction (AAI)-connected neptunyl ions linked together through tetratopic tetrahedral organic ligands (NSM). NSM exhibits an unprecedented net, demonstrating that AAIs may be exploited to give new MOFs and new topologies. To probe its radiation stability, we undertook the first irradiation study of a transuranic MOF and its organic linker building block using high doses of γ rays. Diffraction and spectroscopic data demonstrated that the radiation resistance of NSM is greater than that of its linker building block alone. Approximately 6 MGy of irradiation begins to induce notable changes in the long- and short-range order of the framework, whereas 3 MGy of irradiation induces total X-ray amorphization and changes in the local vibrational bands of the linker building block.

Metal-Triazolate-Framework-Derived FeN4 Cl1 Single-Atom Catalysts with Hierarchical Porosity for the Oxygen Reduction Reaction

The construction of single-atom catalysts (SACs) with high single atom densities, favorable electronic structures and fast mass transfer is highly desired. We have utilized metal-triazolate (MET) frameworks, a subclass of metal-organic frameworks (MOFs) with high N content, as precursors since they can enhance the density and regulate the electronic structure of single-atom sites, as well as generate abundant mesopores simultaneously. Fe single atoms dispersed in a hierarchically porous N-doped carbon matrix with high metal content (2.78 wt %) and a FeN₄ Cl₁ configuration (FeN₄ Cl₁ /NC), as well as mesopores with a pore:volume ratio of 0.92, were obtained via the pyrolysis of a Zn/Fe-bimetallic MET modified with 4,5-dichloroimidazole. FeN₄ Cl₁ /NC exhibits excellent oxygen reduction reaction (ORR) activity in both alkaline and acidic electrolytes. Density functional theory calculations confirm that Cl can optimize the adsorption free energy of Fe sites to *OH, thereby promoting the ORR process. The catalyst demonstrates great potential in zinc-air batteries. This strategy selects, designs, and adjusts MOFs as precursors for high-performance SACs.

Flexible luminescent non-lanthanide metal-organic frameworks as small molecules sensors

Toxic, carcinogenic, and hazardous materials are omnipresent, generally obtained by anthropogenic activities, industrial activities, aerobic and anaerobic degradation of waste materials and are harmful to human health and environment. Thus, sensing, colorimetric detection, and subsequent inclusion of these chemicals are of prime importance for human health and environment. In comparison to other classes of highly porous materials, luminescent metal-organic frameworks (LMOFs) have chromophoric organic ligands, high surface area, high degree of tunability and structural diversity. They have received scientific interest as sensory materials for device fabrication to detect and sense toxic small molecules. Especially, as soft-porous materials exhibiting a degree of flexibility or dynamic behaviour, flexible LMOFs are promising for selective detection and sensing, and for encapsulation of toxic and health hazardous molecules. Such flexible LMOFs offer a potential platform for selective adsorption/separation, molecular recognition, and sensing application. In this perspective, we highlight the advantages of flexibility of LMOFs for selective detection and sensing, and inclusion of toxic small molecules (solvents, anions, halobenzenes, aromatics, aromatic amines, nitro-explosives and acetylacetone). In addition, the principles and strategies guiding the design of these MOF based materials and recent progress in the luminescent detection of toxic small molecules are also discussed. In this perspective we limit our discussion on the 'non-lanthanide' based luminescent MOFs that have flexibility in the framework and show small molecule sensing applications.

Evolution of water structures in metal-organic frameworks for improved atmospheric water harvesting

[Figure: see text].

Spiers Memorial Lecture: Coordination networks that switch between nonporous and porous structures: an emerging class of soft porous crystals

Coordination networks (CNs) are a class of (usually) crystalline solids typically comprised of metal ions or cluster nodes linked into 2 or 3 dimensions by organic and/or inorganic linker ligands. Whereas CNs tend to exhibit rigid structures and permanent porosity as exemplified by most metal-organic frameworks, MOFs, there exists a small but growing class of CNs that can undergo extreme, reversible structural transformation(s) when exposed to gases, vapours or liquids. These "soft" or "stimuli-responsive" CNs were introduced two decades ago and are attracting increasing attention thanks to two features: the amenability of CNs to design from first principles, thereby enabling crystal engineering of families of related CNs; and the potential utility of soft CNs for adsorptive storage and separation. A small but growing subset of soft CNs exhibit reversible phase transformations between nonporous (closed) and porous (open) structures. These "switching CNs" are distinguished by stepped sorption isotherms coincident with phase transformation and, perhaps counterintuitively, they can exhibit benchmark properties with respect to working capacity (storage) and selectivity (separation). This review addresses fundamental and applied aspects of switching CNs through surveying their sorption properties, analysing the structural transformations that enable switching, discussing structure-function relationships and presenting design principles for crystal engineering of the next generation of switching CNs.

Coordination Polymer Glasses with Lava and Healing Ability for High-Performance Gas Sieving

Coordination polymer (CP) glasses offer a way to tackle the fabrication challenges encountered by inorganic porous membranes and show great potentials for size-exclusive gas separation. However, their processability and performance still cannot simultaneously meet the requirements for high-performance membrane separation. Herein, we have developed a series of CP glasses (M-P-dmbIm, M=Zn, Cd, Cu, and Mn), which possess low vitrification temperature as well as low viscosity (η) and lave capability above the transition temperatures. The derived glass (a_g M-P-dmbIm) membranes show outstanding performances for H₂ /CO₂ , H₂ /N₂ , and H₂ /CH₄ separation, which all far surpass the Robeson upper bound and even rival against the best of the state-of-the-art gas separation membranes. The low viscosities not only allow us to hot-cast or hot-press the CP glasses into thin membranes within 5 min without sacrificing their selectivity and permeability, but also endow the resulted glass membranes with healing ability.

In(III) Metal-Organic Framework Incorporated with Enzyme-Mimicking Nickel Bis(dithiolene) Ligand for Highly Selective CO2 Electroreduction

Inspired by the exciting physical/chemical properties in metal-organic frameworks (MOFs) of the redox-active tetrathiafulvalene (TTF) ligands, nickel bis(dithiolene-dibenzoic acid), [Ni(C₂S₂(C₆H₄COOH)₂)₂], has been designed and developed as an inorganic analogue of the corresponding TTF-type donors (such as tetrathiafulvalene-tetrabenzoate, TTFTB), where a metal site (Ni) replaces the central C═C bond. In this work, [Ni(C₂S₂(C₆H₄COOH)₂)₂] and In³⁺ have been successfully assembled into a three-dimensional MOF, (Me₂NH₂⁺){In^III-[Ni(C₂S₂(C₆H₄COO)₂)₂]}·3DMF·1.5H₂O (1, DMF = N,N-dimethylformamide), with satisfying chemical and thermal stabilities. With the combination of reversible redox activity and unsaturated metal sites originated from [Ni(C₂S₂(C₆H₄COOH)₂)₂], 1 showed a significantly enhanced performance in electrocatalytic CO₂ reduction compared with the isomorphic MOF, (Me₂NH₂⁺)[In^III-(TTFTB)]·0.7C₂H₅OH·DMF (2, with TTFTB ligand). More importantly, by mimicking the active [NiS₄] sites of formate dehydrogenase and CO-dehydrogenase, a prominently higher conversion rate and Faradaic efficiency (FE), with FE_HCOO^- increasing from 54.7% to 89.6% (at -1.3 V vs RHE, j_HCOO^- = 36.0 mA cm^-2), were achieved in 1. Mechanistic investigations further confirm that [NiS₄] can serve as a CO₂ binding site and efficient catalytic center. This unprecedented effect of redox-active nickel dithiolene-based MOF catalysts on the performance of electroreduction of CO₂ provides an important strategy for designing stable and efficient crystalline enzyme-mimicking catalysts for the conversion of CO₂ into high-value chemical stocks.

Interwrapping Distinct Metal-Organic Frameworks in Dual-MOFs for the Creation of Unique Composite Catalysts

Incorporating metal nanoparticles (MNPs) inside metal-organic frameworks (MOFs) demonstrates superior catalytic properties in numerous reactions; however, the size and distribution of MNPs could not be well controlled, resulting in low product selectivity in catalysis by undergoing different catalytic reaction pathways. We report herein a facile strategy for integrating lattice-mismatched MOFs together to fabricate homogeneously distributed “dual-MOFs,” which are the ideal precursors for the preparation of MNPs@MOFs with unique catalytic properties. As a proof of concept, we successfully synthesize a dual-MOF HKUST-1/ZIF-8 for in situ creation of redox-active Cu NPs inside hierarchical porous ZIF-8 under controlled pyrolytic conditions. Combining the advantages of size-tunable Cu NPs in the molecular sieving matrix of ZIF-8, Cu@ZIF-8 demonstrates high activity and selectivity for transformation of alkynes into alkenes without overhydrogenation, which surpasses most of the catalysts in the literature. Therefore, this work paves a new pathway for developing highly efficient and selective heterogeneous catalysts to produce highly value-added chemicals.

Capture and Separation of SO2 Traces in Metal-Organic Frameworks via Pre-Synthetic Pore Environment Tailoring by Methyl Groups

Herein, we report a pre-synthetic pore environment design strategy to achieve stable methyl-functionalized metal-organic frameworks (MOFs) for preferential SO2 binding and thus enhanced low (partial) pressure SO2 adsorption and SO2 /CO2 separation. The enhanced sorption performance is for the first time attributed to an optimal pore size by increasing methyl group densities at the benzenedicarboxylate linker in [Ni2 (BDC-X)2 DABCO] (BDC-X=mono-, di-, and tetramethyl-1,4-benzenedicarboxylate/terephthalate; DABCO=1,4-diazabicyclo[2,2,2]octane). Monte Carlo simulations and first-principles density functional theory (DFT) calculations demonstrate the key role of methyl groups within the pore surface on the preferential SO2 affinity over the parent MOF. The SO2 separation potential by methyl-functionalized MOFs has been validated by gas sorption isotherms, ideal adsorbed solution theory calculations, simulated and experimental breakthrough curves, and DFT calculations.

Ultrafast and nanomolar level detection of H2S in aqueous medium using a functionalized UiO-66 metal-organic framework based fluorescent chemosensor

Here, we present a 4-nitrophenyl functionalized Zr-UiO-66 MOF (MOF = metal-organic framework) and its applications towards the selective, sensitive and rapid detection of H₂S both in the aqueous medium and vapour phase. The MOF material was synthesized using the 2-(nitrophenoxy)terepththalic acid (H₂BDC-O-Ph-NO₂) linker and ZrCl₄ salt in the presence of a benzoic acid modulator. It was carefully characterized by thermogravimetric analysis (TGA), elemental analysis, powder X-ray diffraction (PXRD), FT-IR spectroscopy and surface area analysis. Noticeable thermal stability up to a temperature of 390 °C under air and the considerable chemical stability in different liquid media (H₂O, 1 M HCl, glacial acetic acid, NaOH in the pH = 8 to 10 range) confirmed the robustness of the MOF. The BET surface area (1040 m² g^-1) indicated the porous nature of the MOF. Remarkable selectivity of the MOF towards H₂S over other potential congeners of H₂S was observed in the aqueous medium. A very high fluorescence increment (∼77 fold) was observed after adding an aqueous Na₂S solution to the MOF suspension. The MOF probe displayed the lowest limit of detection (12.58 nM) among the existing MOF-based chemosensors of H₂S. Furthermore, it exhibited a very quick (60 s) response towards H₂S detection. The MOF compound could also detect H₂S in the vapour phase as well as in real water samples. Furthermore, we developed inexpensive MOF-coated paper strips for the naked-eye sensing of H₂S. A thorough investigation was carried out in order to elucidate the fluorescence turn-on sensing mechanism.