Preparation and Cross-Linking of All-Acrylamide Diblock Copolymer Nano-Objects via Polymerization-Induced Self-Assembly in Aqueous Solution

Synthesis of High Molecular Weight Poly(glycerol monomethacrylate) via RAFT Emulsion Polymerization of Isopropylideneglycerol Methacrylate

High molecular weight water-soluble polymers are widely used as flocculants or thickeners. However, synthesis of such polymers via solution polymerization invariably results in highly viscous fluids, which makes subsequent processing somewhat problematic. Alternatively, such polymers can be prepared as colloidal dispersions; in principle, this is advantageous because the particulate nature of the polymer chains ensures a much lower fluid viscosity. Herein we exemplify the latter approach by reporting the convenient one-pot synthesis of high molecular weight poly(glycerol monomethacrylate) (PGMA) via the reversible addition-fragmentation chain transfer (RAFT) aqueous emulsion polymerization of a water-immiscible protected monomer precursor, isopropylideneglycerol methacrylate (IPGMA) at 70 °C, using a water-soluble poly(glycerol monomethacrylate) (PGMA) chain transfer agent as a steric stabilizer. This formulation produces a low-viscosity aqueous dispersion of PGMA-PIPGMA diblock copolymer nanoparticles at 20% solids. Subsequent acid deprotection of the hydrophobic core-forming PIPGMA block leads to particle dissolution and affords a viscous aqueous solution comprising high molecular weight PGMA homopolymer chains with a relatively narrow molecular weight distribution. Moreover, it is shown that this latex precursor route offers an important advantage compared to the RAFT aqueous solution polymerization of glycerol monomethacrylate since it provides a significantly faster rate of polymerization (and hence higher monomer conversion) under comparable conditions.

Synthesis of One-Component Nanostructured Polyion Complexes via Polymerization-Induced Electrostatic Self-Assembly

Nanostructured polyion complexes (PICs) are expected to serve as novel platforms to stabilize and deliver drugs, proteins, and nucleic acids. Yet, traditional self-assembly suffers from lack of scale-up and reproducibility. Particularly for one-component PICs, only spheres are available to date. Here, we report an efficient and scalable strategy to prepare one-component low-dimensional PICs. It involves visible-light-mediated RAFT iterative polymerization of opposite-charge monomers at 25% w/w solids in water at 25 °C. Sphere-film-vesicle transition and charge-/medium-tunable shape selectivity are reported. One-component PIC nanowire, ultrathin film, vesicle, tube, and surface-charged vesicle are easily prepared, and vesicle-polymerization is fulfilled, using this new strategy. This strategy provides a general platform to prepare one-component low-dimensional PICs with tailorable morphologies and high reproducibility on commercially viable scale under eco-friendly conditions.

Nanoparticle-Encapsulated Curcumin Inhibits Diabetic Neuropathic Pain Involving the P2Y12 Receptor in the Dorsal Root Ganglia

Diabetic peripheral neuropathy results in diabetic neuropathic pain (DNP). Satellite glial cells (SGCs) enwrap the neuronal soma in the dorsal root ganglia (DRG). The purinergic 2 (P2) Y12 receptor is expressed on SGCs in the DRG. SGC activation plays an important role in the pathogenesis of DNP. Curcumin has anti-inflammatory and antioxidant properties. Because curcumin has poor metabolic stability in vivo and low bioavailability, nanoparticle-encapsulated curcumin was used to improve its targeting and bioavailability. In the present study, our aim was to investigate the effects of nanoparticle-encapsulated curcumin on DNP mediated by the P2Y12 receptor on SGCs in the rat DRG. Diabetic peripheral neuropathy increased the expression levels of the P2Y12 receptor on SGCs in the DRG and enhanced mechanical and thermal hyperalgesia in rats with diabetes mellitus (DM). Up-regulation of the P2Y12 receptor in SGCs in the DRG increased the production of pro-inflammatory cytokines. Up-regulation of interleukin-1β (IL-1β) and connexin43 (Cx43) resulted in mechanical and thermal hyperalgesia in rats with DM. The nanoparticle-encapsulated curcumin decreased up-regulated IL-1β and Cx43 expression and reduced levels of phosphorylated-Akt (p-Akt) in the DRG of rats with DM. The up-regulation of P2Y12 on SGCs and the up-regulation of the IL-1β and Cx43 in the DRG indicated the activation of SGCs in the DRG. The nano-curcumin treatment inhibited the activation of SGCs accompanied by its anti-inflammatory effect to decrease the up-regulated CGRP expression in the DRG neurons. Therefore, the nanoparticle-encapsulated curcumin treatment decreased the up-regulation of the P2Y12 receptor on SGCs in the DRG and decreased mechanical and thermal hyperalgesia in rats with DM.

Light-mediated one-pot synthesis of an ABC triblock copolymer in aqueous solution via RAFT and the effect of pH on copolymer self-assembly

We present the triblock copolymer self-assembly resulting into different morphologies that occurred during the polymerization of a hydrophobic third block in aqueous solution.

Loop-stabilized BAB triblock copolymer morphologies by PISA in water

Assemblies of BAB triblock copolymers are prepared by PISA via aqueous RAFT dispersion polymerization. The importance of charges in the middle of the hydrophilic stabilizer loops is highlighted.

Determination of ADH in textiles using the HPLC-MS/MS method and the study of its adsorption behaviour towards formaldehyde

In the textile industry, formaldehyde-based resins are used as finishers to make the fabrics crease-resistant, which are the main source of formaldehyde in textiles. In our practical study, there are cases that prove that textile products containing adipic dihydrazide (ADH) will continuously adsorb formaldehyde from the surrounding environment during storage. In this study, a high performance liquid chromatography-tandem mass spectrometry method was established for the precise determination of ADH in textiles. The method was optimized in terms of instrument conditions, extraction temperature, extraction time, and extraction mode. Under optimum test conditions, ADH was determined precisely with the linearity range of 0.05–2 mg L⁻¹ and correlation coefficient (R²) of 0.9993. Recovery rate and repeatability were tested; the data showed that the recovery rate of ADH in textiles was in the range of 85–100%, and the RSD (relative standard deviation) was less than 10%. The ADH-positive textile samples were placed in designed environments for some time to adsorb formaldehyde. The adsorbed amounts of formaldehyde in the textile samples first increase and then decrease with time. The maximum amount of formaldehyde a sample can adsorb increases with an increase in its ADH content and will stop increasing once its ADH content exceeds 1700 mg kg⁻¹. The placement environment has a little effect on the maximum adsorption capacity of the samples towards formaldehyde, but can significantly affect the adsorption rate and equilibrium adsorption capacity.

Study on the adsorption behaviour of textiles containing ADH towards formaldehyde under different placement environments.

In situ synthesis of PAA-b-PSt nano-assemblies via dispersion RAFT polymerization: effects of PEG in the medium

A facile and efficient approach was proposed to adjust BCP assemblies in PISA by introduction of PEG in the medium. Both PEG amount and molecular weight have significant effects on PAA-b-PSt micelles.

Effects of nanoparticle-encapsulated curcumin on HIV-gp120-associated neuropathic pain induced by the P2X3 receptor in dorsal root ganglia

HIV-1 envelope glycoprotein (Glycoprotein 120, gp120) can directly stimulate primary sensory afferent neurons and cause chronic neuropathic pain. The P2X₃ receptor in the dorsal root ganglia (DRG) is associated with the transmission of neuropathic pain. Curcumin isolated from the herb Curcuma rhizome has anti-inflammatory and anti-tumor effects. The water solubility, targeting and bioavailability of curcumin can be improved by nanoparticle encapsulation. In this study, we sought to explore the effects of nanoparticle-encapsulated curcumin (nano curcumin) on HIV-gp120-induced neuropathic pain mediated by the P2X₃ receptor in DRG neurons. The results showed that mechanical and thermal hyperalgesia in rats treated with gp120 were increased compared to those in the control group. The expression levels of P2X₃ mRNA and protein in rats treated with gp120 were higher than those in the control group. Nano curcumin treatment decreased mechanical hyperalgesia and thermal hyperalgesia and upregulated the expression levels of P2X₃ mRNA and protein in rats treated with gp120. Nano curcumin treatment also reduced the ERK1/2 phosphorylation levels in gp120-treated rat DRG. In addition, P2X₃ agonist α,β-methylene ATP (α,β-meATP)-induced currents in DRG neurons cultured with gp120 significantly decreased after co-treatment with nano curcumin. Therefore, nano curcumin treatment may inhibit P2X₃ activation, decrease the sensitizing DRG primary afferents and relieve mechanical hyperalgesia and thermal hyperalgesia in gp120-treated rats.

Emulsion Solvent Evaporation-Induced Self-Assembly of Block Copolymers Containing pH-Sensitive Block

A simple yet efficient method is developed to manipulate the self-assembly of pH-sensitive block copolymers (BCPs) confined in emulsion droplets. Addition of acid induces significant variation in morphological transition (e.g., structure and surface composition changes) of the polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) assemblies, due to the hydrophobic-hydrophilic transition of the pH-sensitive P4VP block via protonation. In the case of pH > pKa_(P4VP) (pKa _(P4VP) = 4.8), the BCPs can self-assemble into pupa-like particles because of the nearly neutral wetting of PS and P4VP blocks at the oil/water interface. As expected, onion-like particles obtained when pH is slightly lower than pKa_(P4VP) (e.g., pH = 3.00), due to the interfacial affinity to the weakly hydrophilic P4VP block. Interestingly, when pH was further decreased to ∼2.5, interfacial instability of the emulsion droplets was observed, and each emulsion droplet generated nanoscale assemblies including vesicles, worm-like and/or spherical micelles rather than a nanostructured microparticle. Furthermore, homopolymer with different molecular weights and addition ratio are employed to adjust the interactions among copolymer blocks. By this means, particles with hierarchical structures can be obtained. Moreover, owing to the kinetically controlled processing, we found that temperature and stirring speed, which can significantly affect the kinetics of the evaporation of organic solvent and the formation of particles, played a key role in the morphology of the assemblies. We believe that manipulation of the property for the aqueous phase is a promising strategy to rationally design and fabricate polymeric assemblies with desirable shapes and internal structures.

Phenyl acrylate is a versatile monomer for the synthesis of acrylic diblock copolymer nano-objects via polymerization-induced self-assembly

Poly(phenyl acrylate) has a sufficiently high glass transition temperature to enable TEM studies of the morphology of diblock copolymer nano-objects prepared using three different polymerization-induced self-assembly (PISA) formulations.