Functionalized fullerenes in water. The first 10 years of their chemistry, biology, and nanoscience

π-Concave Hosts for Curved Carbon Nanomaterials

Carbon nanomaterials have been at the forefront of nanotechnology since its inception. At the heart of this research are the curved carbon nanomaterial families: fullerenes and carbon nanotubes. While both have incredible properties that have been capitalized upon in a wide variety of applications, there is an aspect that is not commonly exploited by nanoscientists and organic chemists alike: the interaction of curved carbon nanomaterials with curved organic small molecules. By taking advantage of these interactions, new avenues are opened for the use of fullerenes and carbon nanotubes.

Metal-Free Synthesis of N-Alkyl-2,5-Unsubstituted/Monosubstituted Fulleropyrrolidines: Reaction of [60]Fullerene with Paraformaldehyde and Amines

A series of scarce N-alkyl-2,5-unsubstituted/monosubstituted fulleropyrrolidines were synthesized in moderate to excellent yields by the simple one-step thermal reaction of [60]fullerene with primary/secondary amines in the presence of paraformaldehyde without the addition of valuable metal salts. Intriguingly, the reaction with primary amines unexpectedly afforded N-alkyl-2,5-unsubstituted fulleropyrrolidines instead of the anticipated 2,5-monosubstituted fulleropyrrolidines. A plausible reaction pathway is proposed to elucidate the above-mentioned reaction process based on the experimental results.

Stable and Biocompatible Monodispersion of C60 in Water by Peptides

The lack of solubility in water and the formation of aggregates hamper many opportunities for technological exploitation of C₆₀. Here, different peptides were designed and synthesized with the aim of monomolecular dispersion of C₆₀ in water. Phenylalanines were used as recognizing moieties, able to interact with C₆₀ through π-π stacking, while a varying number of glycines were used as spacers, to connect the two terminal phenylalanines. The best performance in the dispersion of C₆₀ was obtained with the FGGGF peptidic nanotweezer at a pH of 12. A full characterization of this adduct was carried out. The peptides disperse C₆₀ in water with high efficiency, and the solutions are stable for months both in pure water and in physiological environments. NMR measurements demonstrated the ability of the peptides to interact with C₆₀. AFM measurements showed that C₆₀ is monodispersed. Electrospray ionization mass spectrometry determined a stoichiometry of C₆₀@(FGGGF)₄. Molecular dynamics simulations showed that the peptides assemble around the C₆₀ cage, like a candy in its paper wrapper, creating a supramolecular host able to accept C₆₀ in the cavity. The peptide-wrapped C₆₀ is fully biocompatible and the C₆₀ "dark toxicity" is eliminated. C₆₀@(FGGGF)₄ shows visible light-induced reactive oxygen species (ROS) generation at physiological saline concentrations and reduction of the HeLa cell viability in response to visible light irradiation.

A retro Baeyer-Villiger reaction: electrochemical reduction of [60]fullerene-fused lactones to [60]fullerene-fused ketones

An unprecedented retro Baeyer–Villiger reaction has been achieved by the electrochemical reduction of [60]fullerene-fused lactones in the presence of acetic acid at room temperature, affording [60]fullerene-fused ketones in excellent yields within a short time.

A highly efficient electrochemical reduction of [60]fullerene-fused lactones to [60]fullerene-fused ketones, a formal process of retro Baeyer–Villiger reaction, has been achieved for the first time. The electrochemically generated dianionic [60]fullerene-fused lactones can be transformed into [60]fullerene-fused ketones in the presence of acetic acid in 85–91% yields. Control experiments have been performed to elucidate the reaction mechanism. The products have been characterized with spectroscopic data and single-crystal X-ray analysis. Moreover, the electrochemical properties have also been investigated.

Self-Assembled Fullerene Crystals as Excellent Aromatic Vapor Sensors

Here we report the aromatic vapor sensing performance of bitter melon shaped nanoporous fullerene C₆₀ crystals that are self-assembled at a liquid-liquid interface between isopropyl alcohol and C₆₀ solution in dodecylbenzene at 25 °C. Average length and center diameter of the crystals were ca. 10 μm and ~2 μm, respectively. Powder X-ray diffraction pattern (pXRD) confirmed a face-centered cubic (fcc) structure with cell dimension ca. a = 1.4272 nm, and V = 2.907 nm³, which is similar to that of the pristine fullerene C₆₀. Transmission electron microscopy (TEM) confirmed the presence of a nanoporous structure. Quartz crystal microbalance (QCM) results showed that the bitter melon shaped nanoporous C₆₀ performs as an excellent sensing system, particularly for aromatic vapors, due to their easy diffusion through the porous architecture and strong π–π interactions with the sp²-carbon.

Manganese(iii) acetate-mediated activation of C–H bonds of weak CH-acids; addition ofo-carborane, its derivatives, and some other CH-acids to [60]-fullerene

CH-acids includingo-carboranes add to C₆₀by a carbon atomviaoxidative-ion-transfer reactions mediated by Mn(OAc)₃.

Highly soluble C2v-symmetrical fullerene derivatives: efficient synthesis, characterization, and electrochemical study

Through an efficient octa-substitution reaction, octabromofullerene (C₆₀Br₈) was reacted with alcohols or anisole in the presence of silver triflate to produce octaalkoxy and octaaryl fullerenes, respectively, in up to 79% yield with retention of C_2v-symmetry.

Photodynamic Activity of Fullerene Derivatives Solubilized in Water by Natural-Product-Based Solubilizing Agents

Water-soluble fullerenes prepared by using solubilizing agents based on natural products are promising photosensitizers for photodynamic therapy. Cyclodextrin, β-1,3-glucan, lysozyme, and liposomes can stably solubilize not only C₆₀ and C₇₀ , but also some C₆₀ derivatives in water. To improve the solubilities of fullerenes, specific methods have been developed for each solubilizing agent. Water-soluble C₆₀ and C₇₀ exhibit photoinduced cytotoxicity under near-ultraviolet irradiation, but not at wavelengths over 600 nm, which are the appropriate wavelengths for photodynamic therapy. However, dyad complexes of solubilized C₆₀ derivatives combined with light-harvesting antenna molecules improve the photoinduced cytotoxicities at wavelengths over 600 nm. Furthermore, controlling the fullerene and antenna molecule positions within the solubilizing agents affects the performance of the photosensitizer.

Fullerenes as photosensitizers in photodynamic therapy: pros and cons

One class of carbon nanomaterials is the closed cages known as fullerenes. The first member to be discovered in 1985 was C60, called "buckminsterfullerene" as its cage structure resembled a geodesic dome. Due to their extended π-conjugation they absorb visible light, possess a high triplet yield and can generate reactive oxygen species upon illumination, suggesting a possible role of fullerenes in photodynamic therapy (PDT). Pristine C60 is highly hydrophobic and prone to aggregation, necessitating functionalization to provide aqueous solubility and biocompatibility. The most common functional groups attached are anionic (carboxylic or sulfonic acids) or cationic (various quaternary ammonium groups). Depending on the functionalization, these fullerenes can be designed to be taken up into cancer cells, or to bind to microbial cells (Gram-positive, Gram-negative bacteria, fungi). Fullerenes can be excited with a wide range of wavelengths, UVA, blue, green or white light. We have reported a series of functionalized fullerenes (C60, C70, C82) with attached polycationic chains and additional light-harvesting antennae that can be used in vitro and in animal models of localized infections. Advantages of fullerenes as photosensitizers are: (a) versatile functionalization; (b) light-harvesting antennae; (c) ability to undergo Type 1, 2, and 3 photochemistry; (d) electron transfer can lead to oxygen-independent photokilling; (e) antimicrobial activity can be potentiated by inorganic salts; (f) can self-assemble into supramolecular fullerosomes; (g) components of theranostic nanoparticles; (h) high resistance to photobleaching. Disadvantages include: (a) highly hydrophobic and prone to aggregation; (b) overall short wavelength absorption; (c) relatively high molecular weight; (d) paradoxically can be anti-oxidants; (e) lack of fluorescence emission for imaging.

Umbelliferone as a Small Molecular Peroxidase Mimic towards Sensitive Detection of H2O2 and Glucose

In this work, umbelliferone, a kind of coumarin derivative, was proved to exhibit peroxidase-like activity that could catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide to generate a blue-colored oxide (oxTMB). The catalytic mechanism is similar to that of native enzymes (e.g. horseradish peroxidase, HRP) and nanozymes, which follow the Michaelis-Menten kinetics behavior. Meanwhile, the 7-hydroxyl group of umbelliferone plays a significant role in the peroxidase-like activity. Compared with enzymes and nanozymes, this small molecular mimic enzyme possesses the advantages of low cost, simple molecular structures, small molecular weight and high stability against harsh conditions. Based on the favorable peroxidase mimetic activity of umbelliferone, a convenient, practical and sensitive H₂O₂ and glucose detection method was successfully established. This work not only opens some new inspirations into seeking for novel molecular enzyme mimetics with excellent catalytic activities, but also provides promising assays for clinical diagnosis.

Cycloaddition reactions of pristine and endohedral fullerene molecules: possible anticancer activity

Epoxide of oestradiol is one of the main risk factors for the genesis and evolution of breast cancer; hence, in recent years there has been considerable interest in the investigation of new inhibitors capable of reducing its carcinogenic activity. The aim of this article is to study the [2 + 2] cycloaddition reaction of epoxide of oestradiol in different pristine (C₇₆ and D_5h-C₈₀) and endohedral metallofullerene (C₇₂@Sc₂C₂, C₇₆@Sc₂ and C₈₀@Sc₂) by means of molecular electrostatic potential (MEP) topological analysis. Different from other molecular scalar fields, MEP topology enables to find minima related to lone pairs and π electrons, therefore, this molecular scalar field is appropriate to identify the most reactive sites. In consonance with our results, it was found that C₈₀ was the best candidate to carry out the epoxide of oestradiol cycloaddition since more stable adducts were obtained. Furthermore, it is expected that more than one oestradiol epoxide molecule will be added to C₈₀, forasmuch as C₈₀ reactivity is enhanced once the adduct is formed. The study was carried through DFT framework included in the Gaussian 09 package (MPWB95/6-31G(d,p)).

Comparison of two functionalized fullerenes for antimicrobial photodynamic inactivation: Potentiation by potassium iodide and photochemical mechanisms

A new fullerene (BB4-PPBA) functionalized with a tertiary amine and carboxylic acid was prepared and compared with BB4 (cationic quaternary group) for antimicrobial photodynamic inactivation (aPDI). BB4 was highly active against Gram-positive methicillin resistant Staphylococcus aureus (MRSA) and BB4-PPBA was moderately active when activated by blue light. Neither compound showed much activity against Gram-negative Escherichia coli or fungus Candida albicans. Therefore, we examined potentiation by addition of potassium iodide. Both compounds were highly potentiated by KI (1-6 extra logs of killing). BB4-PPBA was potentiated more than BB4 against MRSA and E. coli, while for C. albicans the reverse was the case. Addition of azide potentiated aPDI mediated by BB4 against MRSA, but abolished the potentiation caused by KI with both compounds. The killing ability after light decayed after 24 h in the case of BB4, implying a contribution from hypoiodite as well as free iodine. Tyrosine was readily iodinated with BB4-PPBA plus KI, but less so with BB4. We conclude that the photochemical mechanisms of these two fullerenes are different. BB4-PPBA is more Type 2 (singlet oxygen) while BB4 is more Type 1 (electron transfer). There is also a possibility of direct bacterial killing by electron transfer, but this will require more study to prove.

Remote Control of Anion-π Catalysis on Fullerene-Centered Catalytic Triads

The design, synthesis and evaluation of catalytic triads composed of a central C60 fullerene with an amine base on one side and polarizability enhancers on the other side are reported. According to an enolate addition benchmark reaction, fullerene-fullerene-amine triads display the highest selectivity in anion-π catalysis observed so far, whereas NDI-fullerene-amine triads are not much better than fullerene-amine controls (NDI=naphthalenediimide). These large differences in activity are in conflict with the small differences in intrinsic π acidity, that is, LUMO energy levels and π holes on the central fullerene. However, they are in agreement with the high polarizability of fullerene-fullerene-amine triads. Activation and deactivation of the fullerene-centered triads by intercalators and computational data on anion binding further indicate that for functional relevance, intrinsic π acidity is less important than induced π acidity, that is, the size of the oriented macrodipole of polarizable π systems that emerges only in response to the interaction with anions and anionic transition states. The resulting transformation is thus self-induced, the anionic intermediates and transition states create their own anion-π catalyst.

Proteins as supramolecular hosts for C60: a true solution of C60 in water

Hybrid systems have great potential for a wide range of applications in chemistry, physics and materials science. Conjugation of a biosystem to a molecular material can tune the properties of the components or give rise to new properties. As a workhorse, here we take a C60@lysozyme hybrid. We show that lysozyme recognizes and disperses fullerene in water. AFM, cryo-TEM and high resolution X-ray powder diffraction show that the C60 dispersion is monomolecular. The adduct is biocompatible, stable in physiological and technologically-relevant environments, and easy to store. Hybridization with lysozyme preserves the electrochemical properties of C60. EPR spin-trapping experiments show that the C60@lysozyme hybrid produces ROS following both type I and type II mechanisms. Due to the shielding effect of proteins, the adduct generates significant amounts of 1O2 also in aqueous solution. In the case of type I mechanism, the protein residues provide electrons and the hybrid does not require addition of external electron donors. The preparation process and the properties of C60@lysozyme are general and can be expected to be similar to other C60@protein systems. It is envisaged that the properties of the C60@protein hybrids will pave the way for a host of applications in nanomedicine, nanotechnology, and photocatalysis.

Preparation and photo-induced activities of water-soluble amyloid β-C60 complexes

We have shown that fullerene (C60) becomes soluble in water by mixing fullerene and amyloid β peptide (Aβ40) whose fibril structures are considered to be associated with Alzheimer's disease. The water-solubility of fullerene arises from the generation of a nanosized complex between fullerene and the monomer species of Aβ40 (Aβ40-C60). The prepared Aβ40-C60 exhibits photo-induced activity with visible light to induce the inhibition of Aβ40 fibrillation and the cytotoxicity for cultured HeLa cells. The observed photo-induced phenomena result from the generation of singlet oxygen via photoexcitation, inducing oxidative damage to Aβ40 and HeLa cells. The oxidized Aβ40 following photoexcitation of Aβ40-C60 was confirmed by mass spectrometry.

C60 Bioconjugation with Proteins: Towards a Palette of Carriers for All pH Ranges

The high hydrophobicity of fullerenes and the resulting formation of aggregates in aqueous solutions hamper the possibility of their exploitation in many technological applications. Noncovalent bioconjugation of fullerenes with proteins is an emerging approach for their dispersion in aqueous media. Contrary to covalent functionalization, bioconjugation preserves the physicochemical properties of the carbon nanostructure. The unique photophysical and photochemical properties of fullerenes are then fully accessible for applications in nanomedicine, sensoristic, biocatalysis and materials science fields. However, proteins are not universal carriers. Their stability depends on the biological conditions for which they have evolved. Here we present two model systems based on pepsin and trypsin. These proteins have opposite net charge at physiological pH. They recognize and disperse C60 in water. UV-Vis spectroscopy, zeta-potential and atomic force microscopy analysis demonstrates that the hybrids are well dispersed and stable in a wide range of pH’s and ionic strengths. A previously validated modelling approach identifies the protein-binding pocket involved in the interaction with C60. Computational predictions, combined with experimental investigations, provide powerful tools to design tailor-made C60@proteins bioconjugates for specific applications.

Improvement of Photodynamic Activity of Lipid-Membrane-Incorporated Fullerene Derivative by Combination with a Photo-Antenna Molecule

The weak absorbance of pristine C₆₀ , C₇₀ , and fullerene derivatives at wavelengths over 600 nm hampers the use of these molecules as photosensitizers (PSs) for photodynamic therapy (PDT). The coexistence of light-harvesting antenna molecules with a fullerene derivative in lipid membrane bilayers solved this issue. By controlling the location of the C₆₀ derivative in the lipid membrane, the liposomal dyad system for PDT improved the photodynamic activity via an efficient photoenergy transfer from antenna molecules to the fullerene derivative. The photodynamic activity was found to be much higher than those of dyad systems using pristine C₆₀ and C₇₀ .

Copper-Catalyzed Aerobic Oxidative Reaction of C60 with Aliphatic Primary Amines and CS2

A novel type of fullerene derivatives, [60]fullerothiazolidinethiones (2), were obtained from the copper-catalyzed aerobic oxidative reaction of C₆₀ with aliphatic primary amines and CS₂ in 4:1 v/v DMF and o-DCB. The obtained products were fully characterized with the X-ray single-crystal diffraction and spectroscopic methods. Control experiment with maleic anhydride, an analogue to C₆₀, also afforded thiazolidinethione product, but via a mechanism different from that of C₆₀ judging from the structure difference between the two types of thiazolidinethione compounds, demonstrating the unique reactivity of C₆₀.

Generic Mechanism for Pattern Formation in the Solvation Shells of Buckminsterfullerene

Accurate description of solvation structure of a hydrophobic nanomaterial is of immense importance to understand protein folding, molecular recognition, drug binding, and many related phenomena. Moreover, spontaneous pattern formation through self-organization of solvent molecules around a nanoscopic solute is fascinating and useful in making template-directed nanostructures of desired morphologies. Recently, it has been shown using polarizable atomistic models that the hydration shell of a buckminsterfullerene can have atomically resolved ordered structure, in which C₆₀ atomic arrangement is imprinted. In analyzing any peculiar behavior of water, traditionally, emphasis has been placed on the long-ranged and orientation-dependent interactions in it. Here, we show through molecular dynamics simulation that the patterned solvation layer with the imprints of the hydrophobic surface atoms of the buckminsterfullerene can be obtained from a completely different mechanism arising from a spherically symmetric, short-ranged interaction having two characteristic lengthscales. The nature of the pattern can be modified by adjusting solvent density or pressure. Although solute-solvent dispersion interaction is the key to such pattern formation adjacent to the solute surface, the ordering at longer lengthscale is a consequence of mutual influence of short-range correlations among successive layers. The present study thus demonstrates that the formation of such patterned solvation shells around the buckminsterfullerene is not restricted to water, but encompasses a large class of anomalous fluids represented by two-lengthscale potential.

TEMPO-Mediated Synthesis of Tetrahydropyridinofullerenes: Reaction of [60]Fullerene with α-Methyl-Substituted Arylmethanamines and Aldehydes in the Presence of 4-Dimethylaminopyridine

A series of scarce tetrahydropyridinofullerenes were synthesized by the metal-free-mediated reaction of [60]fullerene with cheap and easily available α-methyl-substituted arylmethanamines and aldehydes in the presence of 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) and 4-dimethylaminopyridine (DMAP) in moderate to good yields comparable to the previously reported data for most monoadducts. The in situ generation of azadienes played a crucial role in the successful synthesis of tetrahydropyridinofullerenes. A plausible reaction mechanism was proposed to elucidate the reaction process.

Stereoselective synthesis of cyclopentafullerenes: the reaction of [60]fullerene with aldehydes and triethylamine promoted by magnesium perchlorate

The magnesium perchlorate-mediated reaction of [60]fullerene with aldehydes and triethylamine generated a series of rare amino-substituted cyclopentafullerenes with high stereoselectivity.

Metal-free synthesis of fulleropyrrolidin-2-ols: a novel reaction of [60]fullerene with amines and 2,2-disubstituted acetaldehydes

The reaction of [60]fullerene with amines and 2,2-disubstituted acetaldehydes in the absence of metal salts afforded a series of novel fulleropyrrolidin-2-ols in moderate yields.

Non-viral Gene Delivery

Although viral vectors comprise the majority of gene delivery vectors, their various safety, production, and other practical concerns have left a research gap to be addressed. The non-viral vector space encompasses a growing variety of physical and chemical methods capable of gene delivery into the nuclei of target cells. Major physical methods described in this chapter are microinjection, electroporation, and ballistic injection, magnetofection, sonoporation, optical transfection, and localized hyperthermia. Major chemical methods described in this chapter are lipofection, polyfection, gold complexation, and carbon-based methods. Combination approaches to improve transfection efficiency or reduce immunological response have shown great promise in expanding the scope of non-viral gene delivery.

Synthesis and self-sensitized photo-oxidation of 2-fulleropyrrolines by palladium(ii)-catalyzed heteroannulation of [60]fullerene with benzoyl hydrazone esters

A Pd(OAc)₂-catalyzed N-heteroannulation reaction was exploited to synthesize N-unsubstituted 2-fulleropyrrolines and the photo-oxidation of 2-fulleropyrrolines was first investigated.

Exploration of nano carbons in relevance to plant systems

The potential applications of nano-carbons and biochar towards plant growth are highlighted and discussed in this perspective article.

Functionalization of [60]fullerene through fullerene cation intermediates

Fullerene cations, namely [60]fullerene radical cation (C₆₀˙⁺) and organo[60]fullerenyl cation (RC₆₀⁺), open paths for the efficient derivatization of a great variety of fullerenes.

Synthesis of fullerotetrahydropyridazines via the copper-catalyzed heteroannulation of [60]fullerene with hydrazides

Fullerotetrahydropyridazines have been efficiently synthesized via the copper-catalyzed reaction of [60]fullerene with hydrazides.

Stereoselective synthesis of N-ethyl-2-arylvinyl-5-methyl fulleropyrrolidines: reaction of [60]fullerene with aromatic aldehydes and triethylamine/diethylamine in the absence or presence of manganese(iii) acetate

Reaction of [60]fullerene with aromatic aldehydes and triethylamine/diethylamine afforded a series of novel fulleropyrrolidines.