Aromatic-proline interactions: electronically tunable CH/π interactions

Probing the Stability of Proline Cis/Trans Isomers in the Gas Phase with Ultraviolet Photodissociation

Although most peptide bonds in proteins exist in the trans configuration, when cis peptide bonds do occur, they can have major impact on protein structure and function. The rapid identification of cis peptide bonds is therefore an important task. Peptide bonds containing proline are more likely to adopt the cis configuration because the ring connecting the side chain and backbone in proline flattens the energetic landscape relative to amino acids with free side chains. Examples of cis proline isomers have been identified in both solution and in the gas phase by a variety of structure-probing methods. Mass spectrometry is an attractive potential method for identifying cis proline due to its speed and sensitivity; however, the question remains of whether cis/trans proline isomers originating in solution are preserved during ionization and manipulation within a mass spectrometer. Herein, we investigate the gas-phase stability of isolated solution-phase cis and trans proline isomers using a synthetic peptide sequence with a Tyr-Pro-Pro motif. A variety of dissociation methods were explored to evaluate their potential to distinguish cis/trans configuration, including collision-induced dissociation, radical-directed dissociation, and photodissociation. Only photodissociation employed in conjunction with extremely gentle electrospray and charge solvation by 18-crown-6 ether was able to distinguish cis/trans isomers for our model peptide, suggesting that any thermal activation during transfer or while in the gas phase leads to isomer scrambling. Furthermore, the necessity for 18-crown-6 suggests that intramolecular charge solvation taking place during electrospray ionization can override cis/trans isomer homogeneity. Overall, the results suggest that solution-phase cis/trans proline isomers are fragile and easily lost during electrospray, requiring careful selection of instrument parameters and consideration of charge solvation to prevent cis/trans scrambling.

Importance of structure-based studies for the design of a novel HIV-1 inhibitor peptide

Based on the structure of an HIV-1 entry inhibitor peptide two stapled- and a retro-enantio peptides have been designed to provide novel prevention interventions against HIV transmission. The three peptides show greater inhibitory potencies in cellular and mucosal tissue pre-clinical models than the parent sequence and the retro-enantio shows a strengthened proteolytic stability. Since HIV-1 fusion inhibitor peptides need to be embedded in the membrane to properly interact with their viral target, the structural features were determined by NMR spectroscopy in micelles and solved by using restrained molecular dynamics calculations. Both parent and retro-enantio peptides demonstrate a topology compatible with a shared helix–turn–helix conformation and assemble similarly in the membrane maintaining the active conformation needed for its interaction with the viral target site. This study represents a straightforward approach to design new targeted peptides as HIV-1 fusion inhibitors and lead us to define a retro-enantio peptide as a good candidate for pre-exposure prophylaxis against HIV-1.

Many Proline Residues in the Extracellular Domain Contribute to Glycine Receptor Function

Prolines in signaling proteins are of particular interest because they have a range of unique properties that may be critical for function. Here we show that many proline residues in the extracellular domain (ECD) of the glycine receptor are involved in the correct functioning of this ligand-gated ion channel. We explore their role by creating mutant receptors, expressing them in cells, and using fluorescent membrane potential sensitive dye to monitor receptor activity. We then interpret the changes in receptor parameters using structural information from the open and closed states of the receptor. The data reveal that substitution with alanine of ten of the 13 Pro residues in the ECD alters the function of the receptor: one substitution ablates function, six cause a decrease in the EC₅₀, and three cause an increase. Only three of these mutants result in EC₅₀ values similar to WT. The nonfunctional mutant, Pro30Ala, was further probed in oocytes, and the data suggest a role in both expression and function. Examination of the locations of sensitive Pro residues in the receptor and identification of potential interactions with nearby residues reveal how these residues could contribute to the correct functioning of this typical pentameric ligand-gated ion channel.

The influence of proline isomerization on potency and stability of anti-HIV antibody 10E8

Monoclonal antibody (mAb) 10E8 recognizes a highly conserved epitope on HIV and is capable of neutralizing > 95% of circulating viral isolates making it one of the most promising Abs against HIV. Solution instability and biochemical heterogeneity of 10E8 has hampered its development for clinical use. We identify the source of 10E8 heterogeneity being linked to cis/trans isomerization at two prolines within the YPP motif in the CRD3 loop that exists as two predominant conformers that interconvert on a slow timescale. The Y_transP conformation conformer can bind the HIV gp41 epitope, while the Y_cisP is not binding competent and shows a higher aggregation propensity. The high barrier of isomerization and propensity to adopt non-binding competent proline conformers provides novel insight into the slow binding kinetics, low potency, and poor solubility of 10E8. This study highlights how proline isomerization should be considered a critical quality attribute for biotherapeutics with paratopes containing potential cis proline amide bonds.

Polyphenol-Mediated Assembly for Particle Engineering

Polyphenols are naturally occurring compounds that are ubiquitous in plants and display a spectrum of physical, chemical, and biological properties. For example, they are antioxidants, have therapeutic properties, absorb UV radiation, and complex with metal ions. Additionally, polyphenols display high adherence, which has been exploited for assembling nanostructured materials. We previously reviewed the assembly of different phenolic materials and their applications (Angew. Chem. Int. Ed. 2019, 58, 1904-1927); however, there is a need for a summary of the fundamental interactions that govern the assembly, stability, and function of polyphenol-based materials. A detailed understanding of interactions between polyphenols and various other building blocks will facilitate the rational design and assembly of advanced polyphenol particles for specific applications. This Account discusses how different interactions and bonding (i.e., hydrogen, π, hydrophobic, metal coordination, covalent, and electrostatic) can be leveraged to assemble and stabilize polyphenol-based particles for diverse applications. In polyphenol-mediated assembly strategies, the polyphenols typically exert more than one type of stabilizing attractive force. However, one interaction often dominates the assembly process and dictates the physicochemical behavior of the particles, which in turn influences potential applications. This Account is thus divided into sections that each focus on a key interaction with relevant examples of applications to highlight structure-function relationships. For example, metal coordination generally becomes weaker at lower pH, which makes it possible to engineer metal-phenolic materials with a pH-responsive disassembly profile suitable for drug delivery. Engineered particles, such as hollow capsules, mesoporous and core-shell particles, and self-assembled nanoparticles are some of the systems that are covered to highlight how polyphenols interact with other building blocks and therefore make up the major focus of this Account. Some of the applications of these materials exemplified in this Account include drug delivery, catalysis, environmental remediation, and forensics. Finally, a perspective is provided on the current challenges and trends in polyphenol-mediated particle assembly, and viable near-term strategies for further elucidating the interplay of various competing interactions in particle formation are discussed. This Account is also expected to serve as a reference to guide fundamental research and facilitate the rational design of polyphenol-based materials for diverse emerging applications.

Co-crystal Structure of Thermosynechococcus elongatus Sucrose Phosphate Synthase With UDP and Sucrose-6-Phosphate Provides Insight Into Its Mechanism of Action Involving an Oxocarbenium Ion and the Glycosidic Bond

In green species, sucrose can help antagonize abiotic stress. Sucrose phosphate synthase (SPS) is a well-known rate-limiting enzyme in the synthesis of sucrose. To date, however, there is no known crystal structure of SPS from plant or cyanobacteria. In this study, we report the first co-crystal structure of SPS from Thermosynechococcus elongatus with UDP and sucrose-6-phosphate (S6P). Within the catalytic site, the side chains of His158 and Glu331, along with two phosphate groups from UDP, form hydrogen bonds with the four hydroxyl groups of the glucose moiety in S6P. This association causes these four hydroxyl groups to become partially negatively charged, thus promoting formation of the C1 oxocarbenium ion. Breakage of the hydrogen bond between His158 and one of the hydroxyl groups may trigger covalent bond formation between the C1 oxocarbenium ion and the C2 hydroxyl of fructose-6-phosphate. Consistent with our structural model, we observed that two SPS mutants, H158A and E331A, lost all catalytic activity. Moreover, electron density of residues from two loops (loop1 and loop2) in the SPS A-domain was not observed, suggest their dynamic nature. B-factor analysis and molecular dynamics stimulations of the full-length enzyme and A-domain indicate that both loops are crucial for binding and release of substrate and product. In addition, temperature gradient analysis shows that SPS exhibits its highest activity at 70°C, suggesting that this enzyme has the potential of being used in industrial production of S6P.

Gating mechanism of elongating β-ketoacyl-ACP synthases

Carbon-carbon bond forming reactions are essential transformations in natural product biosynthesis. During de novo fatty acid and polyketide biosynthesis, β-ketoacyl-acyl carrier protein (ACP) synthases (KS), catalyze this process via a decarboxylative Claisen-like condensation reaction. KSs must recognize multiple chemically distinct ACPs and choreograph a ping-pong mechanism, often in an iterative fashion. Here, we report crystal structures of substrate mimetic bearing ACPs in complex with the elongating KSs from Escherichia coli, FabF and FabB, in order to better understand the stereochemical features governing substrate discrimination by KSs. Complemented by molecular dynamics (MD) simulations and mutagenesis studies, these structures reveal conformational states accessed during KS catalysis. These data taken together support a gating mechanism that regulates acyl-ACP binding and substrate delivery to the KS active site. Two active site loops undergo large conformational excursions during this dynamic gating mechanism and are likely evolutionarily conserved features in elongating KSs.

Molecular basis for catabolism of the abundant metabolite trans-4-hydroxy-L-proline by a microbial glycyl radical enzyme

The glycyl radical enzyme (GRE) superfamily utilizes a glycyl radical cofactor to catalyze difficult chemical reactions in a variety of anaerobic microbial metabolic pathways. Recently, a GRE, trans-4-hydroxy-L-proline (Hyp) dehydratase (HypD), was discovered that catalyzes the dehydration of Hyp to (S)-Δ1-pyrroline-5-carboxylic acid (P5C). This enzyme is abundant in the human gut microbiome and also present in prominent bacterial pathogens. However, we lack an understanding of how HypD performs its unusual chemistry. Here, we have solved the crystal structure of HypD from the pathogen Clostridioides difficile with Hyp bound in the active site. Biochemical studies have led to the identification of key catalytic residues and have provided insight into the radical mechanism of Hyp dehydration.

Conformational landscape of substituted prolines

The cyclic side chain of the amino acid proline confers unique conformational restraints on its backbone and side chain dihedral angles. This affects two equilibria-one at the backbone (cis/trans) and the other at the side chain (endo/exo). Substitutions on the proline ring impose additional steric and stereoelectronic effects that can further modulate both these equilibria, which in turn can also affect the backbone dihedral angle (ϕ, ψ) preferences. In this review, we have explored the conformational landscape of several termini capped mono-(2-, 3-, 4-, and 5-) substituted proline derivatives in the Cambridge Structural Database, correlating observed conformations with the nature of substituents and deciphering the underlying interactions for the observed structural biases. The impact of incorporating these derivatives within model peptides and proteins are also discussed for selected cases. Several of these substituents have been used to introduce bioorthogonal functionality and modulate structure-specific ligand recognition or used as spectroscopic probes. The incorporation of these diversely applicable functional groups, coupled with their ability to define an amino acid conformation via stereoelectronic effects, have a broad appeal among chemical biologists, molecular biophysicists, and medicinal chemists.

Discovery of Stable and Selective Antibody Mimetics from Combinatorial Libraries of Polyvalent, Loop-Functionalized Peptoid Nanosheets

The ability of antibodies to bind a wide variety of analytes with high specificity and high affinity makes them ideal candidates for therapeutic and diagnostic applications. However, the poor stability and high production cost of antibodies have prompted exploration of a variety of synthetic materials capable of specific molecular recognition. Unfortunately, it remains a fundamental challenge to create a chemically diverse population of protein-like, folded synthetic nanostructures with defined molecular conformations in water. Here we report the synthesis and screening of combinatorial libraries of sequence-defined peptoid polymers engineered to fold into ordered, supramolecular nanosheets displaying a high spatial density of diverse, conformationally constrained peptoid loops on their surface. These polyvalent, loop-functionalized nanosheets were screened using a homogeneous Förster resonance energy transfer (FRET) assay for binding to a variety of protein targets. Peptoid sequences were identified that bound to the heptameric protein, anthrax protective antigen, with high avidity and selectivity. These nanosheets were shown to be resistant to proteolytic degradation, and the binding was shown to be dependent on the loop display density. This work demonstrates that key aspects of antibody structure and function-the creation of multivalent, combinatorial chemical diversity within a well-defined folded structure-can be realized with completely synthetic materials. This approach enables the rapid discovery of biomimetic affinity reagents that combine the durability of synthetic materials with the specificity of biomolecular materials.

Structural analysis of the intrinsically disordered splicing factor Spp2 and its binding to the DEAH-box ATPase Prp2

The spliceosome consists of five small RNAs and more than 100 proteins. Almost 50% of the human spliceosomal proteins were predicted to be intrinsically disordered or to contain disordered regions, among them the G-patch protein Spp2. The G-patch region of Spp2 binds to the DEAH-box ATPase Prp2, and both proteins together are essential for promoting the transition from the B^act to the catalytically active B* spliceosome. Here we show by circular dichroism and nuclear magnetic resonance (NMR) spectroscopy that Spp2 is intrinsically disordered in solution. Crystal structures of a complex consisting of Prp2-ADP and the G-patch domain of Spp2 demonstrate that the G-patch gains a defined fold when bound to Prp2. While the N-terminal region of the G-patch always folds into an α-helix in five different crystal structures, the C-terminal part is able to adopt two alternative conformations. NMR studies further revealed that the N-terminal part of the Spp2 G-patch, which is the most conserved region in different G-patch proteins, transiently samples helical conformations, possibly facilitating a conformational selection binding mechanism. The structural analysis unveils the role of conserved residues of the G-patch in the dynamic interaction mode of Spp2 with Prp2, which is vital to maintain the binding during the Prp2 domain movements needed for RNA translocation.

Investigation of the cis–trans structures and isomerization of oligoprolines by using Raman spectroscopy and density functional theory calculations: solute–solvent interactions and effects of terminal positively charged amino acid residues

Using low-wavenumber Raman spectroscopy in combination with theoretical calculations via solid-state density functional theory (DFT)-D3, we studied the vibrational structures and interaction with solvent of poly-l-proline and the oligoproline P12 series. The P12 series includes P12, the positively charged amino acid residue (arginine and lysine) N-terminus proline oligomers RP11 and KP11, and the C-terminus P11R and P11K. We assigned the spring-type phonon mode to 74–76 cm⁻¹ bands for the PPI and PPII conformers and the carbonyl group ring-opening mode 122 cm⁻¹ in the PPI conformer of poly-l-proline. Amide I and II were assigned based on the results of mode analysis for O, N, and C atom displacements. The broad band feature of the H-bond transverse mode in the Raman spectra indicates that the positively charged proline oligomers PPII form H-bonds with water in the solid phase, whereas P12 is relatively more hydrophobic. In propanol, the PPI conformer of the P12 series forms less H-bond network with the solvent. The PPII conformer exhibits a distinct Raman band at 310 cm⁻¹, whereas the PPI has bands at 365, 660, and 960 cm⁻¹ with reasonable intensity that can be used to quantitatively determine these two conformational forms. The 365 cm⁻¹ mode comprising the motion of a C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O group turning to the helix axis was used to monitor the isomerization reaction PPI ↔ PPII. In pure propanol, RP11 and KP11 were found to have mostly PPI present, but P11R and P11K preferred PPII. After adding 20% water, the PPI in P11R and P11K was completely converted to PPII, whereas a small fraction of PPI remained in RP11 and KP11. The substituted positively charged amino acid affected the balance of the PPI/PPII population ratio.

The low-wavenumber Raman spectra in combination with theoretical calculations via solid-state density functional theory (DFT)-D3 are displayed. The vibrational structures and interaction with solvent of poly-l-proline and the oligoproline P12 series are identified.

The Ambivalent Role of Proline Residues in an Intrinsically Disordered Protein: From Disorder Promoters to Compaction Facilitators

Intrinsically disordered proteins (IDPs) carry out many biological functions. They lack a stable three-dimensional structure, but rather adopt many different conformations in dynamic equilibrium. The interplay between local dynamics and global rearrangements is key for their function. In IDPs, proline residues are significantly enriched. Given their unique physicochemical and structural properties, a more detailed understanding of their potential role in stabilizing partially folded states in IDPs is highly desirable. Nuclear magnetic resonance (NMR) spectroscopy, and in particular ¹³C-detected NMR, is especially suitable to address these questions. We applied a ¹³C-detected strategy to study Osteopontin, a largely disordered IDP with a central compact region. By using the exquisite sensitivity and spectral resolution of these novel techniques, we gained unprecedented insight into cis-Pro populations, their local structural dynamics, and their role in mediating long-range contacts. Our findings clearly call for a reassessment of the structural and functional role of proline residues in IDPs. The emerging picture shows that proline residues have ambivalent structural roles. They are not simply disorder promoters but rather can, depending on the primary sequence context, act as nucleation sites for structural compaction in IDPs. These unexpected features provide a versatile mechanistic toolbox to enrich the conformational ensembles of IDPs with specific features for adapting to changing molecular and cellular environments.

Sequential and Environmental Dependence of Conformation in a Small Opioid Peptide

We report the structural characterization of the μ-selective endogenous opioid endomorphin-1 (EM-1) via an array of nuclear magnetic resonance experiments in both aqueous conditions and, for the first time, in isotropic lipid bicelles, which mimic its endogenous environment. Consistent with computationally derived hypotheses, EM-1 is found to significantly populate a compact, turn-like structure in aqueous solution. This structure is only present as a minor species when the peptide is subjected to a lipid environment, in which the presented NMR data suggests that the major conformer of EM-1 lacks internal hydrogen bonds. The interaction of EM-1 with lipid bilayers is characterized by both tryptophan fluorescence and two-dimensional diffusion ordered NMR spectroscopy; these experiments suggest that the interaction with the surface of phospholipid bilayers, operating as a change in bulk solvation, is responsible for the observed conformational rearrangement in EM-1.

Is Gum Arabic a Good Emulsifier Due to CH...π Interactions? How Urea Effectively Destabilizes the Hydrophobic CH...π Interactions in the Proteins of Gum Arabic than Amides and GuHCl?

The photophysical studies of gum arabic (GA) in the presence of urea, 1,3-dimethylurea (DMU), tetramethylurea (TMU), guanidine hydrochloride (GuHCl), formamide (FA), acetamide (AA), and dimethyl formamide (DMF) were carried out by monitoring the emission, three-dimensional emission contour, and time-correlated fluorescence lifetime techniques. On addition of only 1 × 10-3 M urea, 75.0% of the fluorescence of GA is quenched, while the same occurs in GuHCl at 3.0 M. FA quenched 50% of the fluorescence of GA at 5.0 M. However, DMU, TMU, AA, and DMF resulted in a fluorescence enhancement. The unusual fluorescence trends reveal the existence of CH...π interactions in the proteins of GA. The experimental results and the structural aspects of proteins in GA led us to propose that the aggregation of polyproline helices in GA, through several CH...π interactions, would have a major role to play in the emulsification mechanism of GA.

Experimental and theoretical study of the role of CH/π interactions in the aminolysis reaction of acetyl galactoside

Molecular recognition of saccharides is a growing field, which has many implications in cancer therapy, drug discovery, and cellular communication among others. The participation of CH/π interactions in this event is well known. Nevertheless, the intrinsic role of CH/π for modulating chemical reactions is still far from being applicable. In this experimental and computational work we have evaluated the participation of CH/π interactions in the aminolysis reaction of acetyl galactoside promoted with different 6-substituted 2(1H)-pyridones. Two features have been incorporated to the promoter molecular structure, on one end the promoting pyridone group and on the other end the recognition moiety, joined together by an alkyne spacer. The small increment in the observed pseudo-first-order rate constant values (k_obs) was related to the stability of the transition state provided by noncovalent interactions, including CH/π interactions. A longer alkyne spacer was necessary to improve the molecular recognition of the galactoside substrate. The trend of the calculated activation energy values (ΔE_RTS) was in good accordance with the experimental rate constant values.

Stabilization of the triple helix in collagen mimicking peptides

Collagen mimics are peptides designed to reproduce structural features of natural collagen. A triple helix is the first element in the hierarchy of collagen folding. It is an assembly of three parallel peptide chains stabilized by packing and interchain hydrogen bonds. In this review we summarize the existing chemical approaches towards stabilization of this structure including the most recent developments. Currently proposed methods include manipulation of the amino acid composition, application of unnatural amino acid analogues, stimuli-responsive modifications, chain tethering approaches, peptide amphiphiles, modifications that target interchain interactions and more. This ability to manipulate the triple helix as a supramolecular self-assembly contributes to our understanding of the collagen folding. It also provides essential information needed to design collagen-based biomaterials of the future.

Atomic structure of PI3-kinase SH3 amyloid fibrils by cryo-electron microscopy

High resolution structural information on amyloid fibrils is crucial for the understanding of their formation mechanisms and for the rational design of amyloid inhibitors in the context of protein misfolding diseases. The Src-homology 3 domain of phosphatidyl-inositol-3-kinase (PI3K-SH3) is a model amyloid system that plays a pivotal role in our basic understanding of protein misfolding and aggregation. Here, we present the atomic model of the PI3K-SH3 amyloid fibril with a resolution determined to 3.4 Å by cryo-electron microscopy (cryo-EM). The fibril is composed of two intertwined protofilaments that create an interface spanning 13 residues from each monomer. The model comprises residues 1-77 out of 86 amino acids in total, with the missing residues located in the highly flexible C-terminus. The fibril structure allows us to rationalise the effects of chemically conservative point mutations as well as of the previously reported sequence perturbations on PI3K-SH3 fibril formation and growth.

Molecular determinants of the mechanism and substrate specificity of Clostridium difficile proline-proline endopeptidase-1

Pro-Pro endopeptidase-1 (PPEP-1) is a secreted metalloprotease from the bacterial pathogen Clostridium difficile that cleaves two endogenous adhesion proteins. PPEP-1 is therefore important for bacterial motility and hence for efficient gut colonization during infection. PPEP-1 exhibits a unique specificity for Pro-Pro peptide bonds within the consensus sequence VNP↓PVP. In this study, we combined information from crystal and NMR structures with mutagenesis and enzyme kinetics to investigate the mechanism and substrate specificity of PPEP-1. Our analyses revealed that the substrate-binding cleft of PPEP-1 is shaped complementarily to the major conformation of the substrate in solution. We found that it possesses features that accept a tertiary amide and help discriminate P1' residues by their amide hydrogen bond-donating potential. We also noted that residues Lys-101, Trp-103, and Glu-184 are crucial for proteolytic activity. Upon substrate binding, these residues position a flexible loop over the substrate-binding cleft and modulate the second coordination sphere of the catalytic zinc ion. On the basis of these findings, we propose an induced-fit model in which prestructured substrates are recognized followed by substrate positioning within the active-site cleft and a concomitant increase in the Lewis acidity of the catalytic Zn²⁺ ion. In conclusion, our findings provide detailed structural and mechanistic insights into the substrate recognition and specificity of PPEP-1 from the common gut pathogen C. difficile.

Proline Residues in the Transmembrane/Extracellular Domain Interface Loops Have Different Behaviors in 5-HT3 and nACh Receptors

Cys-loop receptors are important drug targets that are involved in signaling in the nervous system. The binding of neurotransmitters in the extracellular region of these receptors triggers an allosteric activation mechanism, the full details of which remain elusive, although structurally flexible loops in the interface between the extracellular region of Cys-loop receptors and the pore-forming transmembrane domain are known to play an important role. Here we explore the roles of three largely conserved Pro residues in two of these loops, the Cys-loop and M2-M3 loop, in 5-HT₃A and α7 nACh receptors. The data from natural and noncanonical amino acid mutagenesis suggest that in both proteins a Pro is essential in the Cys-loop, probably because of its enhanced ability to form a cis peptide bond, although other factors are also involved. The important characteristics of Pros in the M2-M3 loop, however, differ in these two receptors: in the 5-HT₃ receptor, the Pros can be replaced by some charged amino acids resulting in EC₅₀s similar to those of wild-type receptors, while such substitutions in the nACh receptor ablate function. Ala substitution at one of these Pros also has different effects in the two receptors. Thus, our data show that even highly conserved residues can have distinct behaviors in related Cys-loop receptors.

Cyclophilin A allows the allosteric regulation of a structural motif in the disordered domain 2 of NS5A and thereby fine-tunes HCV RNA replication

Implicated in numerous human diseases, intrinsically disordered proteins (IDPs) are dynamic ensembles of interconverting conformers that often contain many proline residues. Whether and how proline conformation regulates the functional aspects of IDPs remains an open question, however. Here, we studied the disordered domain 2 of nonstructural protein 5A (NS5A-D2) of hepatitis C virus (HCV). NS5A-D2 comprises a short structural motif (PW-turn) embedded in a proline-rich sequence, whose interaction with the human prolyl isomerase cyclophilin A (CypA) is essential for viral RNA replication. Using NMR, we show here that the PW-turn motif exists in a conformational equilibrium between folded and disordered states. We found that the fraction of conformers in the NS5A-D2 ensemble that adopt the structured motif is allosterically modulated both by the cis/trans isomerization of the surrounding prolines that are CypA substrates and by substitutions conferring resistance to cyclophilin inhibitor. Moreover, we noted that this fraction is directly correlated with HCV RNA replication efficiency. We conclude that CypA can fine-tune the dynamic ensemble of the disordered NS5A-D2, thereby regulating viral RNA replication efficiency.

Stabilizing and Understanding a Miniprotein by Rational Redesign

Miniproteins reduce the complexity of the protein-folding problem allowing systematic studies of contributions to protein folding and stabilization. Here, we describe the rational redesign of a miniprotein, PPα, comprising a polyproline II helix, a loop, and an α helix. The redesign provides a de novo framework for interrogating noncovalent interactions. Optimized PPα has significantly improved thermal stability with a midpoint unfolding temperature (T_M) of 51 °C. Its nuclear magnetic resonance structure indicates a density of stabilizing noncovalent interactions that is higher than that of the parent peptide, specifically an increased number of CH-π interactions. In part, we attribute this to improved long-range electrostatic interactions between the two helical elements. We probe further sequence-stability relationships in the miniprotein through a series of rational mutations.

Design of a Protein Motif Responsive to Tyrosine Nitration and an Encoded Turn-Off Sensor of Tyrosine Nitration

Tyrosine nitration is a protein post-translational modification that is predominantly non-enzymatic and is observed to be increased under conditions of nitrosative stress and in numerous disease states. A small protein motif (14-18 amino acids) responsive to tyrosine nitration has been developed. In this design, nitrotyrosine replaced the conserved Glu12 of an EF-hand metal-binding motif. Thus, the non-nitrated peptide bound terbium weakly. In contrast, tyrosine nitration resulted in a 45-fold increase in terbium affinity. Nuclear magnetic resonance spectroscopy indicated direct binding of nitrotyrosine to the metal and EF-hand-like metal contacts in this designed peptide. Nitrotyrosine is an efficient quencher of fluorescence. To develop a sensor of tyrosine nitration, the initial design was modified to incorporate Glu residues at EF-hand positions 9 and 16 as additional metal-binding residues, to increase the terbium affinity of the peptide with unmodified tyrosine. This peptide with a tyrosine at residue 12 bound terbium and effectively sensitized terbium luminescence. Tyrosine nitration resulted in a 180-fold increase in terbium affinity ( Kd = 1.6 μM) and quenching of terbium luminescence. This sequence was incorporated as an encoded protein tag and applied as a turn-off fluorescent protein sensor of tyrosine nitration. The sensor was responsive to nitration by peroxynitrite, with fluorescence quenched upon nitration. The greater terbium affinity upon tyrosine nitration resulted in a large dynamic range and sensitivity to substoichiometric nitration. An improved approach for the synthesis of peptides containing nitrotyrosine was also developed, via the in situ silyl protection of nitrotyrosine. This work represents the first designed, encodable protein motif that is responsive to tyrosine nitration.

Cryo-electron microscopy structure of the filamentous bacteriophage IKe

The filamentous bacteriophage IKe is one of many nonenveloped bacterial viruses that encapsulate a circular single-stranded viral genome in the phage capsid shell. The shell of IKe is comprised of about 3,100 copies of the IKe major coat protein. Atomic-resolution structures of filamentous phages are scarce, and the structure of the single-stranded DNA is a matter of debate. Our cryo-electron microscopy structure of the filamentous bacteriophage IKe at a resolution of 3.4 Å provides atomic details on the structure of the major coat protein, the symmetry of the capsid shell, and the key interactions driving its assembly. We propose a model for the conformation of the circular single-stranded DNA core and the interactions between the capsid shell and inner DNA core.

The filamentous bacteriophage IKe infects Escherichia coli cells bearing IncN pili. We report the cryo-electron microscopy structure of the micrometer-long IKe viral particle at a resolution of 3.4 Å. The major coat protein [protein 8 (p8)] consists of 47 residues that fold into a ∼68-Å-long helix. An atomic model of the coat protein was built. Five p8 helices in a horizontal layer form a pentamer, and symmetrically neighboring p8 layers form a right-handed helical cylinder having a rise per pentamer of 16.77 Å and a twist of 38.52°. The inner surface of the capsid cylinder is positively charged and has direct interactions with the encapsulated circular single-stranded DNA genome, which has an electron density consistent with an unusual left-handed helix structure. Similar to capsid structures of other filamentous viruses, strong capsid packing in the IKe particle is maintained by hydrophobic residues. Despite having a different length and large sequence differences from other filamentous phages, π–π interactions were found between Tyr9 of one p8 and Trp29 of a neighboring p8 in IKe that are similar to interactions observed in phage M13, suggesting that, despite sequence divergence, overall structural features are maintained.

Reverse Engineering of a Thermosensing Regulator Switch

To address the mechanism of thermosensing and its implications for molecular engineering, we previously deconstructed the functional components of the bacterial thermosensor DesK, a histidine kinase with a five-span transmembrane domain that detects temperature changes. The system was first simplified by building a sensor that consists of a single chimerical transmembrane segment that retained full sensing capacity. Genetic and biophysical analysis of this minimal sensor enabled the identification of three modular components named determinants of thermodetection (DOTs). Here we combine and tune the DOTs to determine their contribution to activity. A transmembrane zipper represents the master DOT that drives a reversible and activating dimerization through the formation of hydrogen bonds. Our findings provide the mechanism and insights to construct a synthetic transmembrane helix based on a poly-valine scaffold that harbors the DOTs and regulates the activity. The construct constitutes a modular switch that may be exploited in biotechnology and genetic circuitry.

Exploring the binding mechanism between human profilin (PFN1) and polyproline-10 through binding mode screening

The large magnitude of protein-protein interaction (PPI) pairs within the human interactome necessitates the development of predictive models and screening tools to better understand this fundamental molecular communication. However, despite enormous efforts from various groups to develop predictive techniques in the last decade, PPI complex structures are in general still very challenging to predict due to the large number of degrees of freedom. In this study, we use the binding complex of human profilin (PFN1) and polyproline-10 (P10) as a model system to examine various approaches, with the aim of going beyond normal protein docking for PPI prediction and evaluation. The potential of mean force (PMF) was first obtained from the time-consuming umbrella sampling, which confirmed that the most stable binding structure identified by the maximal PMF difference is indeed the crystallographic binding structure. Moreover, crucial residues previously identified in experimental studies, W3, H133, and S137 of PFN1, were found to form favorable hydrogen bonds with P10, suggesting a zipping process during the binding between PFN1 and P10. We then explored both regular molecular dynamics (MD) and steered molecular dynamics (SMD) simulations, seeking for better criteria of ranking the PPI prediction. Despite valuable information obtained from conventional MD simulations, neither the commonly used interaction energy between the two binding parties nor the long-term root mean square displacement correlates well with the PMF results. On the other hand, with a sizable collection of trajectories, we demonstrated that the average and minimal rupture works calculated from SMD simulations correlate fairly well with the PMFs (R ² = 0.67), making this a promising PPI screening method.

Discovery of Novel Druggable Sites on Zika Virus NS3 Helicase Using X-ray Crystallography-Based Fragment Screening

The flavivirus family contains several important human pathogens, such as Zika virus (ZIKV), dengue, West Nile, and Yellow Fever viruses, that collectively lead to a large, global disease burden. Currently, there are no approved medicines that can target these viruses. The sudden outbreak of ZIKV infections in 2015⁻2016 posed a serious threat to global public health. While the epidemic has receded, persistent reservoirs of ZIKV infection can cause reemergence. Here, we have used X-ray crystallography-based screening to discover two novel sites on ZIKV NS3 helicase that can bind drug-like fragments. Both sites are structurally conserved in other flaviviruses, and mechanistically significant. The binding poses of four fragments, two for each of the binding sites, were characterized at atomic precision. Site A is a surface pocket on the NS3 helicase that is vital to its interaction with NS5 polymerase and formation of the flaviviral replication complex. Site B corresponds to a flexible, yet highly conserved, allosteric site at the intersection of the three NS3 helicase domains. Saturation transfer difference nuclear magnetic resonance (NMR) experiments were additionally used to evaluate the binding strength of the fragments, revealing dissociation constants (K_D) in the lower mM range. We conclude that the NS3 helicase of flaviviruses is a viable drug target. The data obtained open opportunities towards structure-based design of first-in-class anti-ZIKV compounds, as well as pan-flaviviral therapeutics.

Aromatic interactions in β-hairpin scaffold stability: A historical perspective

Non-covalent interactions between naturally occurring aromatic residues have been widely exploited as scaffold stabilizing agents in de novo designed peptides and in Nature - inspired structures. Our understanding of the factors driving aromatic interactions and their observed interaction geometries have advanced remarkably with improvements in conventional structural studies, availability of novel molecular methods and in silico studies, which have together provided atomistic information on aromatic interactions and interaction strengths. This review attempts to recapitulate the early advances in our understanding of aromatic interactions as stabilizing agents of peptide β-hairpins.

Applications of γ,δ-Unsaturated Ketones Synthesized by Copper-Catalyzed Cascade Addition of Vinyl Grignard Reagents to Esters

γ,δ-Unsaturated ketones, so-called homoallylic ketones, have served as versatile building blocks for the synthesis of a variety of heterocycles, carbocycles, natural products, and reactive intermediates. Procured by a variety of processes, including conjugate addition of vinyl organometallic reagents to unsaturated ketones, allylation of silyl enol ethers, and rearrangements, homoallylic ketones are often synthesized by step-intensive methods. The cascade addition of 2 equiv of vinyl Grignard reagent to a carboxylate was reported by the Lubell laboratory in 2003 to give effective access to homoallylic ketones from a variety of aromatic, aliphatic, and α-amino methyl esters. Employing readily accessible vinyl magnesium halides in the presence of a catalytic amount of copper salt, this cascade reaction provides high yields of homoallylic ketones with minimal side product by a process featuring the assembly and collapse of a tetrahedral intermediate with expulsion of alkoxide ion, followed by conjugate addition to the resulting enone. Application of the cascade reaction to the synthesis of various homoallylic ketones has provided versatile building blocks for the synthesis of targets for different applications. For example, by employing (hetero)aryl di- and tricarboxylates as precursors, copper-catalyzed cascade additions have provided donor-acceptor and star-shaped monomers for optical-electronic materials. Amino ester starting materials have given homoallylic ketones for the synthesis of various peptidomimetics, including heteroarylalanines, hydroxyethylene isoesters, and diazepinone turn mimics. Moreover, anthranilate has served as building block to prepare various pyrrole, quinoline, benzodiazepine, and benzotriazepine heterocyles. In addition, cascade additions on hydroxyprolinates have given access to bipyrrole precursors of the prodigiosin family of natural products. In the interest to highlight the utility of the copper-catalyzed cascade addition of vinyl Grignard reagents to carboxylates, this Account provides details on the broad scope of substrates that deliver homoallylic ketone products as well as an overview of the wide range of applications in which this method may impact including materials and peptide science, heterocycle and natural product synthesis, and medicinal chemistry.

A Viral Protein Restricts Drosophila RNAi Immunity by Regulating Argonaute Activity and Stability

The dicistrovirus, Cricket paralysis virus (CrPV) encodes an RNA interference (RNAi) suppressor, 1A, which modulates viral virulence. Using the Drosophila model, we combined structural, biochemical, and virological approaches to elucidate the strategies by which CrPV-1A restricts RNAi immunity. The atomic resolution structure of CrPV-1A uncovered a flexible loop that interacts with Argonaute 2 (Ago-2), thereby inhibiting Ago-2 endonuclease-dependent immunity. Mutations disrupting Ago-2 binding attenuates viral pathogenesis in wild-type but not Ago-2-deficient flies. CrPV-1A also contains a BC-box motif that enables the virus to hijack a host Cul2-Rbx1-EloBC ubiquitin ligase complex, which promotes Ago-2 degradation and virus replication. Our study uncovers a viral-based dual regulatory program that restricts antiviral immunity by direct interaction with and modulation of host proteins. While the direct inhibition of Ago-2 activity provides an efficient mechanism to establish infection, the recruitment of a ubiquitin ligase complex enables CrPV-1A to amplify Ago-2 inactivation to restrict further antiviral RNAi immunity.

Pattern to Knowledge: Deep Knowledge-Directed Machine Learning for Residue-Residue Interaction Prediction

Residue-residue close contact (R2R-C) data procured from three-dimensional protein-protein interaction (PPI) experiments is currently used for predicting residue-residue interaction (R2R-I) in PPI. However, due to complex physiochemical environments, R2R-I incidences, facilitated by multiple factors, are usually entangled in the source environment and masked in the acquired data. Here we present a novel method, P2K (Pattern to Knowledge), to disentangle R2R-I patterns and render much succinct discriminative information expressed in different specific R2R-I statistical/functional spaces. Since such knowledge is not visible in the data acquired, we refer to it as deep knowledge. Leveraging the deep knowledge discovered to construct machine learning models for sequence-based R2R-I prediction, without trial-and-error combination of the features over external knowledge of sequences, our R2R-I predictor was validated for its effectiveness under stringent leave-one-complex-out-alone cross-validation in a benchmark dataset, and was surprisingly demonstrated to perform better than an existing sequence-based R2R-I predictor by 28% (p: 1.9E-08). P2K is accessible via our web server on https://p2k.uwaterloo.ca .

EBS is a bivalent histone reader that regulates floral phase transition in Arabidopsis

The ability of cells to perceive and translate versatile cues into differential chromatin and transcriptional states is critical for many biological processes^1-5. In plants, timely transition to a flowering state is crucial for successful reproduction^6-9. EARLY BOLTING IN SHORT DAY (EBS) is a negative transcriptional regulator that prevents premature flowering in Arabidopsis thaliana^10,11. We found that EBS contains bivalent bromo-adjacent homology (BAH)-plant homeodomain (PHD) reader modules that bind H3K27me3 and H3K4me3, respectively. We observed co-enrichment of a subset of EBS-associated genes with H3K4me3, H3K27me3, and Polycomb repressor complex 2 (PRC2). Notably, EBS adopted an autoinhibition mode to mediate its switch in binding preference between H3K27me3 and H3K4me3. This binding balance was critical because disruption of either EBS-H3K27me3 or EBS-H3K4me3 interaction induced early floral transition. Our results identify a bivalent chromatin reader capable of recognizing two antagonistic histone marks, and we propose a distinct mechanism of interaction between active and repressive chromatin states.

Cryo-EM structure of a fungal mitochondrial calcium uniporter

The mitochondrial calcium uniporter (MCU) is a highly selective calcium channel localized to the inner mitochondrial membrane. Here, we describe the structure of an MCU orthologue from the fungus Neosartorya fischeri (NfMCU) determined to 3.8 Å resolution by phase-plate cryo-electron microscopy. The channel is a homotetramer with two-fold symmetry in its amino-terminal domain (NTD) that adopts a similar structure to that of human MCU. The NTD assembles as a dimer of dimers to form a tetrameric ring that connects to the transmembrane domain through an elongated coiled-coil domain. The ion-conducting pore domain maintains four-fold symmetry, with the selectivity filter positioned at the start of the pore-forming TM2 helix. The aspartate and glutamate sidechains of the conserved DIME motif are oriented towards the central axis and separated by one helical turn. The structure of NfMCU offers insights into channel assembly, selective calcium permeation, and inhibitor binding.

Multiple regions in the extracellular domain of the glycine receptor determine receptor activity

Glycine receptors (GlyRs) are Cys-loop receptors that mediate fast synaptic inhibition in the brain stem and spinal cord. They are involved in the generation of motor rhythm, reflex circuit coordination, and sensory signal processing and therefore represent targets for therapeutic interventions. The extracellular domains (ECDs) of Cys-loop receptors typically contain many aromatic amino acids, but only those in the receptor binding pocket have been extensively studied. Here, we show that many Phe residues in the ECD that are not located in the binding pocket are also involved in GlyR function. We examined these Phe residues by creating several GlyR variants, characterizing these variants with the two-electrode voltage clamp technique in Xenopus oocytes, and interpreting changes in receptor parameters by using currently available structural information on the open and closed states of the GlyR. Substitution of six of the eight Phe residues in the ECD with Ala resulted in loss of function or significantly increased the EC₅₀ and also altered the maximal response to the partial GlyR agonist taurine compared with glycine in those receptor variants that were functional. Substitutions with other amino acids, combined with examination of nearby residues that could potentially interact with these Phe residues, suggested interactions that could be important for GlyR function, and possibly similar interactions could contribute to the function of other members of the Cys-loop receptor family. Overall, our results suggest that many ECD regions are important for GlyR function and that these regions could inform the design of therapeutic agents targeting GlyR activity.

Trend-Analysis of Solid-State Structures: Low-Energy Conformational 'Reactions' Involving Directed and Coupled Movements in Half-Sandwich Compounds [CpFe(CO){C(=O)R}PPh3]

Trends in solid‐state structures were used to identify preferred intramolecular movements in half‐sandwich compounds [CpFe(CO){C(=O)R}PPh₃]. Three weak interactions were analyzed: 1) the CH/π donor–acceptor interaction of phenyl rings in the PPh₃ ligand, 2) the Ph_PPh3 face‐on Cp stabilization, and 3) the hydrogen bond between the oxygen atom of the acyl group and an ortho‐C−H bond of one of the PPh₃ phenyl rings. Clockwise and counter‐clockwise rotations established directed and coupled movements of the PPh₃ ligand, the acyl group, and the phenyl rings within the PPh₃ ligand.

Synergistic effects of H3 and H4 nucleosome tails on structure and dynamics of a lesion-containing DNA: Binding of a displaced lesion partner base to the H3 tail for GG-NER recognition

How DNA lesions in nucleosomes are recognized for global genome nucleotide excision repair (GG-NER) remains poorly understood, and the roles that histone tails may play remains to be established. Histone H3 and H4 N-terminal tails are of particular interest as their acetylation states are important in regulating nucleosomal functions in transcription, replication and repair. In particular the H3 tail has been the focus of recent attention as a site for the interaction with XPC, the GG-NER lesion recognition factor. Here we have investigated how the structure and dynamics of the DNA lesion cis-B[a]P-dG, derived from the environmental carcinogen benzo[a]pyrene (B[a]P), is impacted by the presence of flanking H3 and H4 tails. This lesion is well-repaired by GG-NER, and adopts a base-displaced/intercalated conformation in which the lesion partner C is displaced into the major groove. We used molecular dynamics simulations to obtain structural and dynamic characterizations for this lesion positioned in nucleosomal DNA so that it is bracketed by the H3 and H4 tails. The H4 tail was studied in unacetylated and acetylated states, while the H3 tail was unacetylated, its state when it binds XPC (Kakumu, Nakanishi et al., 2017). Our results reveal that upon acetylation, the H4 tail is released from the DNA surface; the H3 tail then forms a pocket that induces flipping and capture of the displaced lesion partner base C. This reveals synergistic effects of the behavior of the two tails. We hypothesize that the dual capability of the H3 tail to sense the displaced lesion partner base and to bind XPC could foster recognition of this lesion by XPC for initiation of GG-NER in nucleosomes.

Specific β-Turns Precede PPIIL Structures Binding to Allele-Specific HLA-DRβ1* PBRs in Fully-Protective Malaria Vaccine Components

The 3D structural analysis of 62 peptides derived from highly pathogenic Plasmodium falciparum malaria parasite proteins involved in host cell invasion led to finding a striking association between particular β-turn types located in the N-terminal peripheral flanking residue region (preceding the polyproline II left-handed structures fitting into the HLA-DRβ^* allele family) and modified immune protection-inducing protein structure induced long-lasting protective immunity. This is the first time association between two different secondary structures associated with a specific immunological function has been described: full, long-lasting protective immunity.