Thermochromic Polymers—Function by Design

Fluorescent Polystyrene Films for the Detection of Volatile Organic Compounds Using the Twisted Intramolecular Charge Transfer Mechanism

Thin films of styrene copolymers containing fluorescent molecular rotors were demonstrated to be strongly sensitive to volatile organic compounds (VOCs). Styrene copolymers of 2-[4-vinyl(1,1′-biphenyl)-4′-yl]-cyanovinyljulolidine (JCBF) were prepared with different P(STY-co-JCBF)(m) compositions (m% = 0.10–1.00) and molecular weights of about 12,000 g/mol. Methanol solutions of JCBF were not emissive due to the formation of the typical twisted intramolecular charge transfer (TICT) state at low viscosity regime, which formation was effectively hampered by adding progressive amounts of glycerol. The sensing performances of the spin-coated copolymer films (thickness of about 4 µm) demonstrated significant vapochromism when exposed to VOCs characterized by high vapour pressure and favourable interaction with the polymer matrix such as tetrahydrofurane (THF), CHCl₃ and CH₂Cl₂. The vapochromic response was also reversible and reproducible after successive exposure cycles, whereas the fluorescence variation scaled linearly with VOC concentration, thus suggesting future applications as VOC optical sensors.

Easily Processable Temperature-Responsive Infrared-Reflective Polymer Coatings

A temperature-responsive near-infrared reflective coating was fabricated based on a side-chain liquid crystal siloxane polymer using a simple wired-bar method. The cholesteric liquid crystalline polymer film showed a blue shift of the reflection band of ∼1000 nm in the IR region upon heating. The temperature-responsive change of the reflection band was reversible. Compared to that of the same mixture system in an alignment cell, the coating showed a significantly faster response. This research demonstrates an easy way to prepare a temperature-responsive IR-reflective coating that shifts its reflection to a shorter wavelength upon heating. As IR radiation of shorter wavelengths is more strongly represented in sunlight than longer wavelengths, this coating could be used to selectively reduce heating of an indoor space when the temperature is high. This is promising for the future application of smart climate control.

Detection and imaging of thermochromic ink compounds in erasable pens using desorption electrospray ionization mass spectrometry

RATIONALE

Thermochromic ink pens are widely accessible worldwide and have gained popularity among the general public. These pens are very useful to undo mistakes while writing important documents or exams. They are also, however, misused in committing crimes such as counterfeiting checks or wills. Thus, the forensics community is in need of techniques that will allow these forgeries to be detected rapidly, reliably and conveniently.

METHODS

Thermochromic ink compounds were investigated using Desorption Electrospray Ionization (DESI) coupled with an LTQ mass spectrometer and Thin-Layer Chromatography (TLC). Tandem mass spectrometric analysis was conducted using Electrospray Ionization (ESI) coupled with an Orbitrap LTQ mass spectrometer performing Collision-Induced Dissociation (CID) for identification of ink traces.

RESULTS

Chemical marker ions characteristic of the state of ink (visible or invisible) were identified and mapped in ink traces by the use of DESI-MS imaging. These ions can be employed by forensic experts as fingerprint markers in forged documents. The marker ions were also characterised by conducting tandem mass spectrometry using paper spray in an Orbitrap LTQ mass spectrometer.

CONCLUSIONS

Specific chemical components yielding ions of m/z 400, 405, 615 and 786 were distinguished as only being apparent in the invisible and reappeared state of the ink. The absence of these compounds in the original state of the ink enabled their recognition as useful chemical determinants in detecting forgery. DESI-MSI was thus shown to be a very useful, convenient and reliable technique for detecting forgery in paper documents due to its fast and reproducible mode of analysis, with no sample preparation and minimal damage to the document under investigation. Copyright © 2017 John Wiley & Sons, Ltd.

Thermochromic Ion-Exchange Micelles Containing H+ Chromoionophores

Thermochromic composites constitute a classical subfamily of stimuli responsive materials. We report here the thermochromic effect in Pluronic F-127 (F127) micelles containing hydrophobic ion-exchanger and H⁺ chromoionophores. The highly versatile and reversible thermochromism is attributed to the temperature-induced hydration-dehydration of the peripheral layer of the micelles, which in turn controls the ion-exchange process between the core and the periphery of the micelles. The color typically changes abruptly within 3-5 °C, and the color transition temperature can be tuned within 5-25 °C upon varying the F127 concentrations. This work lays the foundation of a new variety of thermochromic materials involving ion-exchange.

Hue-based quantification of mechanochromism towards a cost-effective detection of mechanical strain in polymer systems

HSV is a digital colour space easily accessible by the transformation of RGB images. In this work, the hue parameter H was used to assess mechanically induced colour changes of the aggregation-sensitive fluorescent dye 4,4'-bis-(2-benzoxazolyl)stilbene (BBS), thus implementing a cheap and reliable method for the detection of mechanical deformation in a polymer matrix.

Real-Time Imaging of 2D and 3D Temperature Distribution: Coating of Metal-Ion-Intercalated Organic Layered Composites with Tunable Stimuli-Responsive Properties

Organic layered materials have intercalation and dynamic properties. The dynamic properties are tuned by the intercalation of the guests. In general, however, it is not easy to achieve the homogeneous and thin coating of the layered materials on substrates with complex shapes because of the two-dimensional anisotropic structures. In the present work, the layered organic composites were homogeneously coated on a variety of substrates for application to practical devices. The metal-ion-intercalated layered polydiacetylene (PDA-Mⁿ⁺) with tunable stimuli-responsive color-change properties was coated on substrates, such as paper and cotton consisting of cellulose fibers. The homogeneous and thin coating of the precursor monomer crystal was achieved on the substrates through the controlled crystal growth. The intercalation and topochemical polymerization generated PDA-Mⁿ⁺ on the substrates. The PDA-Mⁿ⁺-coated devices visualized temperature distribution of two-dimensional surface and three-dimensional space in real time.

4,7-Bis[3-(dimesitylboryl)thien-2-yl]benzothiadiazole: Solvato-, Thermo-, and Mechanochromism Based on the Reversible Formation of an Intramolecular B-N Bond

4,7-Bis-[3-(dimesitylboryl)thien-2-yl]benzothiadiazole (1) and monoborylated derivative 2 were synthesized and their chromic behavior was investigated. Photophysical measurements, single-crystal XRD analysis, and theoretical calculations revealed that an intramolecular B-N coordination bond formed reversibly. The equilibrium of this reversible bond formation depends on the solid-state structure, solvent, temperature, and mechanical forces, and leads to significant changes in the electronic structure and chromic behavior of these molecules. The responsiveness toward external stimuli, resulting in the reversible formation of open and closed forms of this system, is achieved through weak intramolecular B-N coordination bonds induced by the steric bulk of the mesityl groups on the boron centers.

Thermoresponsive Gels

Thermoresponsive gelling materials constructed from natural and synthetic polymers can be used to provide triggered action and therefore customised products such as drug delivery and regenerative medicine types as well as for other industries. Some materials give Arrhenius-type viscosity changes based on coil to globule transitions. Others produce more counterintuitive responses to temperature change because of agglomeration induced by enthalpic or entropic drivers. Extensive covalent crosslinking superimposes complexity of response and the upper and lower critical solution temperatures can translate to critical volume temperatures for these swellable but insoluble gels. Their structure and volume response confer advantages for actuation though they lack robustness. Dynamic covalent bonding has created an intermediate category where shape moulding and self-healing variants are useful for several platforms. Developing synthesis methodology-for example, Reversible Addition Fragmentation chain Transfer (RAFT) and Atomic Transfer Radical Polymerisation (ATRP)-provides an almost infinite range of materials that can be used for many of these gelling systems. For those that self-assemble into micelle systems that can gel, the upper and lower critical solution temperatures (UCST and LCST) are analogous to those for simpler dispersible polymers. However, the tuned hydrophobic-hydrophilic balance plus the introduction of additional pH-sensitivity and, for instance, thermochromic response, open the potential for coupled mechanisms to create complex drug targeting effects at the cellular level.

Temperature, ultrasound and redox triple-responsive poly(N-isopropylacrylamide) block copolymer: synthesis, characterization and controlled release

Triple stimuli-responsive polymers PNiPAAm-S-S-PXCL containing a disulfide (–S–S–) bond as a junction point between hydrophilic and hydrophobic chains were synthesized and characterized.

Stimuli-responsive polymers and their applications

Responsive polymer-based materials are capable of altering their chemical and/or physical properties upon exposure to external stimuli. This review highlights their use for sensing and biosensing, drug delivery, and artificial muscles/actuators.

Color change of alternating copolymers with phenyl vinylethylene carbonate and N-phenylmaleimide in a solution and in the solid-state, depending on their structure

The alternating PVEC and PMI copolymers with various composition ratios exhibited reversible color changes such as halochromism in solution and in the solid-state.

Vapochromic features of new luminogens based on julolidine-containing styrene copolymers

We report on vapochromic films suitable for detecting volatile organic compounds (VOCs), based on new polystyrene copolymers containing julolidine fluorescent molecular rotors (JCAEM). Poly(styrene-co-hydroxyethylmethacrylate) copolymers functionalized with cyanovinyl-julolidine moieties of different compositions were prepared, (P(STY-co-JCAEM)(m) with m = 0.06–0.61). The sensing performance of the spin-coated copolymer films demonstrated significant vapochromism when exposed to VOCs characterized by high vapour pressure and a favourable interaction with the polymer matrix, such as Et₂O and CH₂Cl₂. It is worth mentioning that the fluorescence decrease rate was 7 times faster than that of previously investigated julolidine-based fluorescent molecular rotors dispersed in PS films. This phenomenon was attributed to the better control of the JCAEM moiety distribution in the polymer matrix conferred by the covalent approach, combined with a minimal film thickness of 4 microns. These factors, in concert, strongly accelerate the deactivation pathways of the JCAEM units in the presence of VOCs which interact well. Overall, the present results support the use of julolidine-enriched styrene copolymers as effective chromogenic materials suitable for the fast detection of VOCs.

A mechano- and thermoresponsive luminescent cyclophane

The first fluorescent cyclophane with mechano- and thermoresponsive solid-state fluorescence characteristics is reported. The new cyclophane comprises two 9,10-bis(phenylethynyl)anthracene moieties that are bridged by tetraethylene glycol spacers. The stimuli-responsiveness is based on molecular assembly changes.

General Platform for Remarkably Thermoresponsive Fluorescent Polymers with Memory Function

Memory polymers capable of remembering their shape or thermal history have attracted increasing interest due to their potential applications in smart and medical devices. Memory polymers established are mechanically based, which suffer from some inherent limitations such as low sensitivity and bulky size. Here, we develop a general platform for sensitive memory polymers. Incorporating crystallizable polymers with solid-state fluorescent dyes results in crystallizable fluorescent polymers. Such polymers show remarkably temperature-dependent fluorescence emission. Interestingly, fluorescence of the polymers shows a hysteresis between heating and subsequent cooling scans, which offers them a valuable thermally stimulated recording function. Both off-on and on-off recording functions can be achieved. Characters recorded on the polymer films can be erased and rewritten. Moreover, thermal history subjected to the polymers can be memorized and retrieved by measuring fluorescence intensity. With the merit of easy synthesis, recording function, remarkably thermoresponsive fluorescence with memory function, superior flexibility, and biocompatibility inherited from polymers, crystallizable fluorescent polymers offer a general platform for memory fluorescent polymers that are potentially useful for biosensing, recording materials, and smart devices.

Thermoresponsive Polymers and Inverse Opal Hydrogels for the Detection of Diols

Responsive inverse opal hydrogels functionalized by boroxole moieties were synthesized and explored as sensor platforms for various low molar mass as well as polymeric diols and polyols, including saccharides, glycopolymers and catechols, by exploiting the diol induced modulation of their structural color. The underlying thermoresponsive water-soluble copolymers and hydrogels exhibit a coil-to-globule or volume phase transition, respectively, of the LCST-type. They were prepared from oligoethylene oxide methacrylate (macro)monomers and functionalized via copolymerization to bear benzoboroxole moieties. The resulting copolymers represent weak polyacids, which can bind specifically to diols within an appropriate pH window. Due to the resulting modulation of the overall hydrophilicity of the systems and the consequent shift of their phase transition temperature, the usefulness of such systems for indicating the presence of catechols, saccharides, and glycopolymers was studied, exploiting the diol/polyol induced shifts of the soluble polymers' cloud point, or the induced changes of the hydrogels' swelling. In particular, the increased acidity of benzoboroxoles compared to standard phenylboronic acids allowed performing the studies in PBS buffer (phosphate buffered saline) at the physiologically relevant pH of 7.4. The inverse opals constructed of these thermo- and analyte-responsive hydrogels enabled following the binding of specific diols by the induced shift of the optical stop band. Their highly porous structure enabled the facile and specific optical detection of not only low molar mass but also of high molar mass diol/polyol analytes such as glycopolymers. Accordingly, such thermoresponsive inverse opal systems functionalized with recognition units represent attractive and promising platforms for the facile sensing of even rather big analytes by simple optical means, or even by the bare eye.

SrMnO3 Thermochromic Behavior Governed by Size-Dependent Structural Distortions

The influence of particle size in both the structure and thermochromic behavior of 4H-SrMnO3 related perovskite is described. Microsized SrMnO3 suffers a structural transition from hexagonal (P63/mmc) to orthorhombic (C2221) symmetry at temperature close to 340 K. The orthorhombic distortion is due to the tilting of the corner-sharing Mn2O9 units building the 4H structural type. When temperature decreases, the distortion becomes sharper reaching its maximal degree at ∼125 K. These structural changes promote the modification of the electronic structure of orthorhombic SrMnO3 phase originating the observed color change. nano-SrMnO3 adopts the ideal 4H hexagonal structure at room temperature, the orthorhombic distortion being only detected at temperature below 170 K. A decrease in the orthorhombic distortion degree, compared to that observed in the microsample, may be the reason why a color change is not observed at low temperature (77 K).

Influence of the Near Molecular Vicinity on the Temperature Regulated Fluorescence Response of Poly(N-vinylcaprolactam)

A series of new fluorescent dye bearing monomers, including glycomonomers, based on maleamide and maleic esteramide was synthesized. The dye monomers were incorporated by radical copolymerization into thermo-responsive poly(N‑vinyl-caprolactam) that displays a lower critical solution temperature (LCST) in aqueous solution. The effects of the local molecular environment on the polymers' luminescence, in particular on the fluorescence intensity and the extent of solvatochromism, were investigated below as well as above the phase transition. By attaching substituents of varying size and polarity in the close vicinity of the fluorophore, and by varying the spacer groups connecting the dyes to the polymer backbone, we explored the underlying structure⁻property relationships, in order to establish rules for successful sensor designs, e.g., for molecular thermometers. Most importantly, spacer groups of sufficient length separating the fluorophore from the polymer backbone proved to be crucial for obtaining pronounced temperature regulated fluorescence responses.

Switchable Materials for Smart Windows

This article reviews the basic principles of and recent developments in electrochromic, photochromic, and thermochromic materials for applications in smart windows. Compared with current static windows, smart windows can dynamically modulate the transmittance of solar irradiation based on weather conditions and personal preferences, thus simultaneously improving building energy efficiency and indoor human comfort. Although some smart windows are commercially available, their widespread implementation has not yet been realized. Recent advances in nanostructured materials provide new opportunities for next-generation smart window technology owing to their unique structure-property relations. Nanomaterials can provide enhanced coloration efficiency, faster switching kinetics, and longer lifetime. In addition, their compatibility with solution processing enables low-cost and high-throughput fabrication. This review also discusses the importance of dual-band modulation of visible and near-infrared (NIR) light, as nearly 50% of solar energy lies in the NIR region. Some latest results show that solution-processable nanostructured systems can selectively modulate the NIR light without affecting the visible transmittance, thus reducing energy consumption by air conditioning, heating, and artificial lighting.

Thermochromic Infrared Metamaterials

An infrared artificial thermochromic material composed of a metamaterial emitter and a bimaterial micro-electro-mechanical system is investigated. A differential emissivity of over 30% is achieved between 623 K and room temperature. The passive metamaterial device demonstrates the ability to independently control the peak wavelength and temperature dependence of the emissivity, and achieves thermal emission following a super Stefan-Boltzmann power curve.

Noble metal plasmonic nanostructure related chromisms

Chromisms related to noble metal nanostructures are classified and discussed.

Synthesis of CuS nanoplate-containing PDMS film with excellent near-infrared shielding properties

CuS nanoplates have been developed as a near-infrared (NIR) shielding agent, and the corresponding flexible CuS/PDMS composite film can transmit visible light (400–780 nm) but efficiently block NIR light (780–2500 nm).

Continuously-tunable fluorescent polypeptides through a polymer-assisted assembly strategy

We developed a versatile method to continuously tune the packing and fluorescence of organic chromophores through a polymer-assisted assembly (PAA) strategy, affording a catalog of fluorescent polymers with continuously-tunable fluorescence emission.

Tuning the thermo- and mechanoresponsive behavior of luminescent cyclophanes

The thermo- and mechanoresponsive luminescent behavior of cyclophanes is tuned just by changing the ring size.

Reversible Piezofluorochromic Property and Intrinsic Structure Changes of Tetra(4-methoxyphenyl)ethylene under High Pressure

During the past decade, luminescent mechanochromism has received much attention. Despite the garnered attention, only a few studies have reported the effect of internal molecular structure change on the performance of mechanochromic fluorescence. Here, we chose tetra(4-methoxyphenyl)ethylene (TMOE) as a model molecule to study the correlation between structure and fluorescence property under a hydrostatic pressure produced by a diamond anvil cell (DAC). TMOE is a methoxy-substituted tetraphenylethylene (TPE) derivative and has a nearly centrosymmetric structure and a natural propeller shape. Ultraviolet-visible absorption and fluorescence spectra of TMOE and TPE in solution proved that the presence of methoxy groups in TMOE is responsible for the difference in fluorescence emissions of TMOE and TPE. Under a hydrostatic pressure, the in situ fluorescence spectra of TMOE at different concentrations show that the fluorescence intensity gradually weakens, accompanied by an obvious redshift. The Raman peak intensities decrease gradually, and the peaks disappear eventually with the pressure increasing. These spectral changes are attributed to the changes in the intramolecular conformation, that is, the strengthening of the weak C-H···O hydrogen bonds in TMOE molecules, which is caused by the twisted dihedral angle between the benzene ring and the carbon rigid plane of ethylene. Density functional theory simulation further confirms that the decreased dihedral angle could weaken Raman peak intensity, which is consistent with our experimental results.

Unusually high fluorescence quantum yield of a homopolyfluorenylazomethine--towards a universal fluorophore

The absolute fluorescence quantum yield (Φfl) of a polyfluorenyl azomethine homopolymer was measured as a function of solvent polarity. The solvent induced and temperature dependent fluorescence of the homopolymer were also investigated and they were compared to the corresponding monomer and copolymer. The Φfl of the homopolymer was consistent (45-70%), regardless of solvent polarity with Stokes shifts up to 7460 cm(-1) in ethanol. In contrast, the Φfl of its corresponding monomer decreased from 60% in ethanol to 1% in toluene, whereas a Φfl < 5% for its analogous copolymer was measured. Moderate fluorescence yields (Φfl ≈ 25%) were also possible in thin film when co-depositing the homopolymer with PMMA. Cryofluorescence was used to probe the excited state deactivation modes. Deactivation by internal conversion was found to compete with fluorescence. The fluorescence deactivation pathways of the homopolymer and its corresponding monomer could be suppressed at 77 K, resulting in fluorescence turn-on. Both fluorophores were found to detect nitroaromatics.

Load characteristics of a suspended carbon nanotube film heater and the fabrication of a fast-response thermochromic display prototype

The influence of heating load on the thermal response of a CNT film heater has been studied. Two kinds of heat dissipation modes, thermal radiation in a vacuum and convection in the atmosphere, are investigated, respectively. It is found that the thermal response slows down with the load quantities in the both cases. We have further studied the thermal response of a CNT film loaded with thermochromic pigment, which is a kind of phase change material. In addition to the thermal response slowing down with the load quantity, it is also found that the phase change of the thermochromic pigments can also slow down the thermal response. With a suspended CNT film heater structure, we have fabricated a thermochromic display prototype, which can switch from room temperature to 50 °C in about 1 s with a brightness contrast of 4.8 under normal indoor illumination. A 16 × 16 pixel thermochromic display prototype can dynamically display Chinese characters driven by a homemade circuit.

Mechanosensitive membrane probes

This article assembles pertinent insights behind the concept of planarizable push-pull probes. As a response to the planarization of their polarized ground state, a red shift of their excitation maximum is expected to report on either the disorder, the tension, or the potential of biomembranes. The combination of chromophore planarization and polarization contributes to various, usually more complex processes in nature. Examples include the color change of crabs or lobsters during cooking or the chemistry of vision, particularly color vision. The summary of lessons from nature is followed by an overview of mechanosensitive organic materials. Although often twisted and sometimes also polarized, their change of color under pressure usually originates from changes in their crystal packing. Intriguing exceptions include the planarization of several elegantly twisted phenylethynyl oligomers and polymers. Also mechanosensitive probes in plastics usually respond to stretching by disassembly. True ground-state planarization in response to molecular recognition is best exemplified with the binding of thoughtfully twisted cationic polythiophenes to single- and double-stranded oligonucleotides. Molecular rotors, en vogue as viscosity sensors in cells, operate by deplanarization of the first excited state. Pertinent recent examples are described, focusing on λ-ratiometry and intracellular targeting. Complementary to planarization of the ground state with twisted push-pull probes, molecular rotors report on environmental changes with quenching or shifts in emission rather than absorption. The labeling of mechanosensitive channels is discussed as a bioengineering approach to bypass the challenge to create molecular mechanosensitivity and use biological systems instead to sense membrane tension. With planarizable push-pull probes, this challenge is met not with twistome screening, but with "fluorescent flippers," a new concept to insert large and bright monomers into oligomeric probes to really feel the environment and also shine when twisted out of conjugation.

Synthesis of polypyrrole nanoparticles for constructing full-polymer UV/NIR-shielding film

Polypyrrole (PPy) nanoparticles with diameter of ∼50 nm are synthesized, and the corresponding flexible PPy–polyacrylic acid (PAA) full-polymer films can transmit visible light but efficiently block UV/NIR light.

A radical spin on viologen polymers: organic spin crossover materials in water

A polymer containing viologen radical cation monomer units is shown to reversibly switch between paramagnetic and diamagnetic statesvianon-covalent host–guest interactions or temperature control in water.

A novel carbazole-based gold(i) complex with interesting solid-state, multistimuli-responsive characteristics

A novel carbazole-based gold(ι) complex is reported. The luminogen exhibits significative solid-state reversible mechanochromism, dual-responsive thermochromism and sensitive thin-film vapochromism properties.

A fluorescent, photochromic and thermochromic trifunctional material based on a layered metal–viologen complex

A 2D layered viologen-based zinc complex exhibits the rare discolored function of reversible photochromism and thermochromism. Interestingly, its fluorescence can be switched by visible light irradiation and heating in air.

Thermochromic polyethylene films doped with perylene chromophores: experimental evidence and methods for characterization of their phase behaviour

LLDPE films doped with aggregachromic PE-Pery fluorophores were proposed as a thermochromic system in the 30–70 °C regime.

A photochromic and thermochromic fluorescent protein

An engineered fluorescent protein exhibits visibly striking photochromism and thermochromism under ambient conditions.