Long-term operation of microbial electrosynthesis systems improves acetate production by autotrophic microbiomes

Effect of Start-Up Strategies and Electrode Materials on Carbon Dioxide Reduction on Biocathodes

The enrichment of CO₂-reducing microbial biocathodes is challenging. Previous research has shown that a promising approach could be to first enrich bioanodes and then lower the potential so the electrodes are converted into biocathodes. However, the effect of such a transition on the microbial community on the electrode has not been studied. The goal of this study was thus to compare the start-up of biocathodes from preenriched anodes with direct start-up from bare electrodes and to investigate changes in microbial community composition. The effect of three electrode materials on the long-term performance of the biocathodes was also investigated. In this study, preenrichment of acetate-oxidizing bioanodes did not facilitate the start-up of biocathodes. It took about 170 days for the preenriched electrodes to generate substantial cathodic current, compared to 83 days for the bare electrodes. Graphite foil and carbon felt cathodes produced higher current at the beginning of the experiment than did graphite rods. However, all electrodes produced similar current densities at the end of the over 1-year-long study (2.5 A/m²). Methane was the only product detected during operation of the biocathodes. Acetate was the only product detected after inhibition of the methanogens. Microbial community analysis showed that Geobacter sp. dominated the bioanodes. On the biocathodes, the Geobacter sp. was succeeded by Methanobacterium spp., which made up more than 80% of the population. After inhibition of the methanogens, Acetobacterium sp. became dominant on the electrodes (40% relative abundance). The results suggested that bioelectrochemically generated H₂ acted as an electron donor for CO₂ reduction.

IMPORTANCE In microbial electrochemical systems, living microorganisms function as catalysts for reactions on the anode and/or the cathode. There is a variety of potential applications, ranging from wastewater treatment and biogas generation to production of chemicals. Systems with biocathodes could be used to reduce CO₂ to methane, acetate, or other high-value chemicals. The technique can be used to convert solar energy to chemicals. However, enriching biocathodes that are capable of CO₂ reduction is more difficult and less studied than enriching bioanodes. The effect of different start-up strategies and electrode materials on the microbial communities that are enriched on biocathodes has not been studied. The purpose of this study was to investigate two different start-up strategies and three different electrode materials for start-up and long-term operation of biocathodes capable of reducing CO₂ to valuable biochemicals.

Impact of dissolved carbon dioxide concentration on the process parameters during its conversion to acetate through microbial electrosynthesis

The reduction of carbon dioxide (CO₂) released from industry can help to reduce the emissions of greenhouse gases (GHGs) to the atmosphere while at the same time producing value-added chemicals and contributing to carbon fixation.

High efficiency microbial electrosynthesis of acetate from carbon dioxide by a self-assembled electroactive biofilm

Microbial electrosynthesis (MES) is a biocathode-driven process, producing high-value chemicals from CO₂. Here, an in situ self-assembled graphene oxide (rGO)/biofilm was constructed, in MES, for high efficient acetate production. GO has been successfully reduced by electroautotrophic bacteria for the first time. An increase, of 1.5 times, in the volumetric acetate production rate, was obtained by self-assembling rGO/biofilm, as compared to the control group. In MES with rGO/biofilm, a volumetric acetate production rate of 0.17gl^-1d^-1 has been achieved, 77% of the electrons consumed, were recovered and the final acetate concentration reached 7.1gl^-1, within 40days. A three-dimensional rGO/biofilm was constructed enabling highly efficient electron transfer rates within biofilms, and between biofilm and electrode, demonstrating that the development of 3D electroactive biofilms, with higher extracellular electron transfer rates, is an effective approach to improving MES efficiency.

Metagenome-Assembled Genome Sequences of Acetobacterium sp. Strain MES1 and Desulfovibrio sp. Strain MES5 from a Cathode-Associated Acetogenic Microbial Community

Draft genome sequences of Acetobacterium sp. strain MES1 and Desulfovibrio sp. strain MES5 were obtained from the metagenome of a cathode-associated community enriched within a microbial electrosynthesis system (MES). The draft genome sequences provide insight into the functional potential of these microorganisms within an MES and a foundation for future comparative analyses.

Metabolic Reconstruction and Modeling Microbial Electrosynthesis

Microbial electrosynthesis is a renewable energy and chemical production platform that relies on microbial cells to capture electrons from a cathode and fix carbon. Yet despite the promise of this technology, the metabolic capacity of the microbes that inhabit the electrode surface and catalyze electron transfer in these systems remains largely unknown. We assembled thirteen draft genomes from a microbial electrosynthesis system producing primarily acetate from carbon dioxide, and their transcriptional activity was mapped to genomes from cells on the electrode surface and in the supernatant. This allowed us to create a metabolic model of the predominant community members belonging to Acetobacterium, Sulfurospirillum, and Desulfovibrio. According to the model, the Acetobacterium was the primary carbon fixer, and a keystone member of the community. Transcripts of soluble hydrogenases and ferredoxins from Acetobacterium and hydrogenases, formate dehydrogenase, and cytochromes of Desulfovibrio were found in high abundance near the electrode surface. Cytochrome c oxidases of facultative members of the community were highly expressed in the supernatant despite completely sealed reactors and constant flushing with anaerobic gases. These molecular discoveries and metabolic modeling now serve as a foundation for future examination and development of electrosynthetic microbial communities.

Extracellular electron transfer in acetogenic bacteria and its application for conversion of carbon dioxide into organic compounds

Acetogenic bacteria (i.e., acetogens) produce acetate from CO₂ during anaerobic chemoautotrophic growth. Because acetogens fix CO₂ with high energy efficiency, they have been investigated as biocatalysts of CO₂ conversion into valuable chemicals. Recent studies revealed that some acetogens are capable of extracellular electron transfer (EET), which enables electron exchange between microbial cells and extracellular solid materials. Thus, acetogens are promising candidates as biocatalysts in recently developed bioelectrochemical technologies, including microbial electrosynthesis (MES), in which useful chemicals are biologically produced from CO₂ using electricity as the energy source. In microbial photoelectrosynthesis, a variant of MES technology, the conversion of CO₂ into organic compounds is achieved using light as the sole energy source without an external power supply. In this mini-review, we introduce the general features of bioproduction and EET of acetogens and describe recent progress and future prospects of MES technologies based on the EET capability of acetogens.

Microbial fuel cells: From fundamentals to applications. A review

In the past 10-15 years, the microbial fuel cell (MFC) technology has captured the attention of the scientific community for the possibility of transforming organic waste directly into electricity through microbially catalyzed anodic, and microbial/enzymatic/abiotic cathodic electrochemical reactions. In this review, several aspects of the technology are considered. Firstly, a brief history of abiotic to biological fuel cells and subsequently, microbial fuel cells is presented. Secondly, the development of the concept of microbial fuel cell into a wider range of derivative technologies, called bioelectrochemical systems, is described introducing briefly microbial electrolysis cells, microbial desalination cells and microbial electrosynthesis cells. The focus is then shifted to electroactive biofilms and electron transfer mechanisms involved with solid electrodes. Carbonaceous and metallic anode materials are then introduced, followed by an explanation of the electro catalysis of the oxygen reduction reaction and its behavior in neutral media, from recent studies. Cathode catalysts based on carbonaceous, platinum-group metal and platinum-group-metal-free materials are presented, along with membrane materials with a view to future directions. Finally, microbial fuel cell practical implementation, through the utilization of energy output for practical applications, is described.

Microbial potential for carbon and nutrient cycling in a geogenic supercritical carbon dioxide reservoir

Microorganisms catalyze carbon cycling and biogeochemical reactions in the deep subsurface and thus may be expected to influence the fate of injected supercritical (sc) CO2 following geological carbon sequestration (GCS). We hypothesized that natural subsurface scCO2 reservoirs, which serve as analogs for the long-term fate of sequestered scCO2 , harbor a 'deep carbonated biosphere' with carbon cycling potential. We sampled subsurface fluids from scCO2 -water separators at a natural scCO2 reservoir at McElmo Dome, Colorado for analysis of 16S rRNA gene diversity and metagenome content. Sequence annotations indicated dominance of Sulfurospirillum, Rhizobium, Desulfovibrio and four members of the Clostridiales family. Genomes extracted from metagenomes using homology and compositional approaches revealed diverse mechanisms for growth and nutrient cycling, including pathways for CO2 and N2 fixation, anaerobic respiration, sulfur oxidation, fermentation and potential for metabolic syntrophy. Differences in biogeochemical potential between two production well communities were consistent with differences in fluid chemical profiles, suggesting a potential link between microbial activity and geochemistry. The existence of a microbial ecosystem associated with the McElmo Dome scCO2 reservoir indicates that potential impacts of the deep biosphere on CO2 fate and transport should be taken into consideration as a component of GCS planning and modelling.

High-efficient acetate production from carbon dioxide using a bioanode microbial electrosynthesis system with bipolar membrane

The aim of this study was to develop an efficient bioanode microbial electrosynthesis system (MES) to convert carbon dioxide into acetate using bioenergy from the wastewater. The bioanode MESs were constructed using proton exchange membrane (PEM) and bipolar membrane (BPM) as separator, respectively, and operated under different voltages (i.e., 0.8, 1.0, 1.2, and 1.4V). Since BPM could dissociate H₂O into H⁺ and OH^- in situ to buffer the pH change in the chambers, the BPM-MES achieved 238% improvement in cathodic acetate production rate, 45% increase in anodic substrate removal efficiency, and more than five times enhancement in current output, as compared to the PEM-MES. The biomass on the surface of anode and cathode, and the relative abundance of Acetobacterium in the cathode of BPM-MES was higher than that in PEM-MES. Bioanode MES with BPM should be a useful microbial electrosynthesis strategy for acetate production using bioenergy from wastewater treatment.

Performance of different Sporomusa species for the microbial electrosynthesis of acetate from carbon dioxide

Sporomusa ovata DSM-2662 produces high rate of acetate during microbial electrosynthesis (MES) by reducing CO₂ with electrons coming from a cathode. Here, we investigated other Sporomusa for MES with cathode potential set at -690mVvsSHE to establish if this capacity is conserved among this genus and to identify more performant strains. S. ovata DSM-2663 produced acetate 1.8-fold faster than S. ovata DSM-2662. On the contrary, S. ovata DSM-3300 was 2.7-fold slower whereas Sporomusa aerivorans had no MES activity. These results indicate that MES performance varies among Sporomusa. During MES, electron transfer from cathode to microbes often occurs via H₂. To establish if efficient coupling between H₂ oxidation and CO₂ reduction may explain why specific acetogens are more productive MES catalysts, the metabolisms of the investigated Sporomusa were characterized under H₂:CO₂. Results suggest that other phenotypic traits besides the capacity to oxidize H₂ efficiently are involved.

A review on bio-electrochemical systems (BESs) for the syngas and value added biochemicals production

Bio-electrochemical systems (BESs) are the microbial systems which are employed to produce electricity directly from organic wastes along with some valuable chemicals production such as medium chain fatty acids; acetate, butyrate and alcohols. In this review, recent updates about value-added chemicals production concomitantly with the production of gaseous fuels like hydrogen and methane which are considered as cleaner for the environment have been addressed. Additionally, the bottlenecks associated with the conversion rates, lower yields and other aspects have been mentioned. In spite of its infant stage development, this would be the future trend of energy, biochemicals and electricity production in greener and cleaner pathway with the win-win situation of organic waste remediation. Henceforth, this review intends to summarise and foster the progress made in the BESs and discusses its challenges and outlook on future research advances.

Energy Efficiency and Productivity Enhancement of Microbial Electrosynthesis of Acetate

It was hypothesized that a lack of acetogenic biomass (biocatalyst) at the cathode of a microbial electrosynthesis system, due to electron and nutrient limitations, has prevented further improvement in acetate productivity and efficiency. In order to increase the biomass at the cathode and thereby performance, a bioelectrochemical system with this acetogenic community was operated under galvanostatic control and continuous media flow through a reticulated vitreous carbon (RVC) foam cathode. The combination of galvanostatic control and the high surface area cathode reduced the electron limitation and the continuous flow overcame the nutrient limitation while avoiding the accumulation of products and potential inhibitors. These conditions were set with the intention of operating the biocathode through the production of H2. Biofilm growth occurred on and within the unmodified RVC foam regardless of vigorous H2 generation on the cathode surface. A maximum volumetric rate or space time yield for acetate production of 0.78 g/Lcatholyte/h was achieved with 8 A/Lcatholyte (83.3 A/m2projected surface area of cathode) supplied to the continuous flow/culture bioelectrochemical reactors. The total Coulombic efficiency in H2 and acetate ranged from approximately 80-100%, with a maximum of 35% in acetate. The overall energy efficiency ranged from approximately 35-42% with a maximum to acetate of 12%.

On the Edge of Research and Technological Application: A Critical Review of Electromethanogenesis

The conversion of electrical current into methane (electromethanogenesis) by microbes represents one of the most promising applications of bioelectrochemical systems (BES). Electromethanogenesis provides a novel approach to waste treatment, carbon dioxide fixation and renewable energy storage into a chemically stable compound, such as methane. This has become an important area of research since it was first described, attracting different research groups worldwide. Basics of the process such as microorganisms involved and main reactions are now much better understood, and recent advances in BES configuration and electrode materials in lab-scale enhance the interest in this technology. However, there are still some gaps that need to be filled to move towards its application. Side reactions or scaling-up issues are clearly among the main challenges that need to be overcome to its further development. This review summarizes the recent advances made in the field of electromethanogenesis to address the main future challenges and opportunities of this novel process. In addition, the present fundamental knowledge is critically reviewed and some insights are provided to identify potential niche applications and help researchers to overcome current technological boundaries.

Effects of applied potential on phosphine formation in synthetic wastewater treatment by Microbial Electrolysis Cell (MEC)

Phosphine (PH₃) emission from conventional biological wastewater treatment is very inefficient (ng-μg m^-3). In this work, we investigated the feasibility of promoting PH₃ formation from inorganic phosphorus (IP) or organic phosphorus (OP) containing synthetic wastewater treatment by Microbial Electrolysis Cell (MEC) for the first time. Positive effect of applied potential on PH₃ production was observed after methanogens was inhibited. The highest production of PH₃ (1103.10 ± 72.02 ng m^-3) was obtained in IP-fed MEC operated at -0.6 V, which was about 5-fold and 2-fold compared to that in open circuit experiment and OP-fed MEC, respectively. Meanwhile, PH₃ formation corresponded positively with current density and alkaline phosphatase activity. This result showed that suitable potential could enhance the activity of relevant enzymes and boost the biosynthesis of PH₃. Bacterial communities analysis based on high-throughput sequencing revealed that applied potential was conductive to the enrichment of phosphate-reducing organisms in contrast to the control test. These results provide a new idea for resource utilization of phosphorus in wastewater.

Tracking bio-hydrogen-mediated production of commodity chemicals from carbon dioxide and renewable electricity

This study reveals that reduction of carbon dioxide (CO₂) to commodity chemicals can be functionally compartmentalized in bioelectrochemical systems. In the present example, a syntrophic consortium composed by H₂-producers (Rhodobacter sp.) in the biofilm is combined with carboxidotrophic Clostridium species, mainly found in the bulk liquid. The performance of these H₂-mediated electricity-driven systems could be tracked by the activity of a biological H₂ sensory protein identified at cathode potentials between -0.2V and -0.3V vs SHE. This seems to point out that such signal is not strain specific, but could be detected in any organism containing hydrogenases. Thus, the findings of this work open the door to the development of a biosensor application or soft sensors for monitoring such systems.

Competition between Methanogens and Acetogens in Biocathodes: A Comparison between Potentiostatic and Galvanostatic Control

Microbial electrosynthesis is a useful form of technology for the renewable production of organic commodities from biologically catalyzed reduction of CO₂. However, for the technology to become applicable, process selectivity, stability and efficiency need strong improvement. Here we report on the effect of different electrochemical control modes (potentiostatic/galvanostatic) on both the start-up characteristics and steady-state performance of biocathodes using a non-enriched mixed-culture inoculum. Based on our results, it seems that kinetic differences exist between the two dominant functional microbial groups (i.e., homoacetogens and methanogens) and that by applying different current densities, these differences may be exploited to steer product selectivity and reactor performance.

Hybrid photosynthesis-powering biocatalysts with solar energy captured by inorganic devices

The biological reduction of CO₂ driven by sunlight via photosynthesis is a crucial process for life on earth. However, the conversion efficiency of solar energy to biomass by natural photosynthesis is low. This translates in bioproduction processes relying on natural photosynthesis that are inefficient energetically. Recently, hybrid photosynthetic technologies with the potential of significantly increasing the efficiency of solar energy conversion to products have been developed. In these systems, the reduction of CO₂ into biofuels or other chemicals of interest by biocatalysts is driven by solar energy captured with inorganic devices such as photovoltaic cells or photoelectrodes. Here, we explore hybrid photosynthesis and examine the strategies being deployed to improve this biotechnology.

Anode potential influences the structure and function of anodic electrode and electrolyte-associated microbiomes

Three bioelectrochemical systems were operated with set anode potentials of +300 mV, +550 mV and +800 mV vs. Standard Hydrogen Electrode (SHE) to test the hypothesis that anode potential influences microbial diversity and is positively associated with microbial biomass and activity. Bacterial and archaeal diversity was characterized using 16 S rRNA gene amplicon sequencing, and biofilm thickness was measured as a proxy for biomass. Current production and substrate utilization patterns were used as measures of microbial activity and the mid-point potentials of putative terminal oxidases were assessed using cyclic voltammetry. All measurements were performed after 4, 16, 23, 30 and 38 days. Microbial biomass and activity differed significantly between anode potentials and were lower at the highest potential. Anodic electrode and electrolyte associated community composition was also significantly influenced by anode potential. While biofilms at +800 mV were thinner, transferred less charge and oxidized less substrate than those at lower potentials, they were also associated with putative terminal oxidases with higher mid-point potentials and generated more biomass per unit charge. This indicates that microbes at +800 mV were unable to capitalize on the potential for additional energy gain due to a lack of adaptive traits to high potential solid electron acceptors and/or sensitivity to oxidative stress.

Enhanced microbial electrosynthesis by using defined co-cultures

Microbial uptake of free cathodic electrons presents a poorly understood aspect of microbial physiology. Uptake of cathodic electrons is particularly important in microbial electrosynthesis of sustainable fuel and chemical precursors using only CO₂ and electricity as carbon, electron and energy source. Typically, large overpotentials (200 to 400 mV) were reported to be required for cathodic electron uptake during electrosynthesis of, for example, methane and acetate, or low electrosynthesis rates were observed. To address these limitations and to explore conceptual alternatives, we studied defined co-cultures metabolizing cathodic electrons. The Fe(0)-corroding strain IS4 was used to catalyze the electron uptake reaction from the cathode forming molecular hydrogen as intermediate, and Methanococcus maripaludis and Acetobacterium woodii were used as model microorganisms for hydrogenotrophic synthesis of methane and acetate, respectively. The IS4-M. maripaludis co-cultures achieved electromethanogenesis rates of 0.1-0.14 μmol cm^-2 h^-1 at -400 mV vs standard hydrogen electrode and 0.6-0.9 μmol cm^-2 h^-1 at -500 mV. Co-cultures of strain IS4 and A. woodii formed acetate at rates of 0.21-0.23 μmol cm^-2 h^-1 at -400 mV and 0.57-0.74 μmol cm^-2 h^-1 at -500 mV. These data show that defined co-cultures coupling cathodic electron uptake with synthesis reactions via interspecies hydrogen transfer may lay the foundation for an engineering strategy for microbial electrosynthesis.

Application of gas diffusion biocathode in microbial electrosynthesis from carbon dioxide

Microbial catalysis of carbon dioxide (CO₂) reduction to multi-carbon compounds at the cathode is a highly attractive application of microbial electrosynthesis (MES). The microbes reduce CO₂ by either taking the electrons or reducing the equivalents produced at the cathode. While using gaseous CO₂ as the carbon source, the biological reduction process depends on the dissolution and mass transfer of CO₂ in the electrolyte. In order to deal with this issue, a gas diffusion electrode (GDE) was investigated by feeding CO₂ through the GDE into the MES reactor for its reduction at the biocathode. A combination of the catalyst layer (porous activated carbon and Teflon binder) and the hydrophobic gas diffusion layer (GDL) creates a three-phase interface at the electrode. So, CO₂ and reducing equivalents will be available to the biocatalyst on the cathode surface. An enriched inoculum consisting of acetogenic bacteria, prepared from an anaerobic sludge, was used as a biocatalyst. The cathode potential was maintained at -1.1 V vs Ag/AgCl to facilitate direct and/or hydrogen-mediated CO₂ reduction. Bioelectrochemical CO₂ reduction mainly produced acetate but also extended the products to ethanol and butyrate. Average acetate production rates of 32 and 61 mg/L/day, respectively, with 20 and 80 % CO₂ gas mixture feed were achieved with 10 cm² of GDE. The maximum acetate production rate remained 238 mg/L/day for 20 % CO₂ gas mixture. In conclusion, a gas diffusion biocathode supported bioelectrochemical CO₂ reduction with enhanced mass transfer rate at continuous supply of gaseous CO₂. Graphical abstract ᅟ.

Microbial Electrosynthesis and Anaerobic Fermentation: An Economic Evaluation for Acetic Acid Production from CO2 and CO

Microbial electrosynthesis (MES) and anaerobic fermentation (AF) are two biological processes capable of reducing CO₂, CO, and water into acetic acid, an essential industrial reagent. In this study, we evaluated investment and production costs of acetic acid via MES and AF, and compared them to industrial chemical processes: methanol carbonylation and ethane direct oxidation. Production and investment costs were found high-priced for MES (1.44 £/kg, 1770 £/t) and AF (4.14 £/kg, 1598 £/t) because of variable and fixed costs and low production yields (100 t/y) compared to methanol carbonylation (0.26 £/kg, 261 £/t) and ethane direct oxidation (0.11 £/kg, 258 £/t). However, integrating AF with MES would reduce the release of CO₂, double production rates (200 t/y), and decrease investment costs by 9% (1366 £/t). This resulted into setting the production costs at 0.24 £/kg which is currently market competitive (0.48 £/kg). This economically feasible bioprocess produced molar flow rates of 4550 mol per day from MES and AF independently. Our findings offer a bright opportunity toward the use and scale-up of MES and AF for an economically viable acetic acid production process.

The bioelectrosynthesis of acetate

Risks associated with climate change are driving the search for new technologies to produce fuels and chemicals. The microbial electrosynthesis of chemical compounds, using electricity and CO₂ as feedstock and microbes to deliver the catalysts, has the potential to be one of those technologies. Central to the production of multicarbon compounds by this process is the bioelectrosynthesis of acetate (electroacetogenesis), and significant improvements in productivity and insightful discoveries concerning the extracellular transfer of electrons to the acetogenic microorganisms have been made recently. This review examines these advances and how they are influencing the development of microbial electrosynthesis into a new biotechnology for the sustainable production of fuels and chemicals.

Water splitting-biosynthetic system with CO₂ reduction efficiencies exceeding photosynthesis

Artificial photosynthetic systems can store solar energy and chemically reduce CO2 We developed a hybrid water splitting-biosynthetic system based on a biocompatible Earth-abundant inorganic catalyst system to split water into molecular hydrogen and oxygen (H2 and O2) at low driving voltages. When grown in contact with these catalysts, Ralstonia eutropha consumed the produced H2 to synthesize biomass and fuels or chemical products from low CO2 concentration in the presence of O2 This scalable system has a CO2 reduction energy efficiency of ~50% when producing bacterial biomass and liquid fusel alcohols, scrubbing 180 grams of CO2 per kilowatt-hour of electricity. Coupling this hybrid device to existing photovoltaic systems would yield a CO2 reduction energy efficiency of ~10%, exceeding that of natural photosynthetic systems.

Comparative Genomic Analysis of Sulfurospirillum cavolei MES Reconstructed from the Metagenome of an Electrosynthetic Microbiome

Sulfurospirillum spp. play an important role in sulfur and nitrogen cycling, and contain metabolic versatility that enables reduction of a wide range of electron acceptors, including thiosulfate, tetrathionate, polysulfide, nitrate, and nitrite. Here we describe the assembly of a Sulfurospirillum genome obtained from the metagenome of an electrosynthetic microbiome. The ubiquity and persistence of this organism in microbial electrosynthesis systems suggest it plays an important role in reactor stability and performance. Understanding why this organism is present and elucidating its genetic repertoire provide a genomic and ecological foundation for future studies where Sulfurospirillum are found, especially in electrode-associated communities. Metabolic comparisons and in-depth analysis of unique genes revealed potential ecological niche-specific capabilities within the Sulfurospirillum genus. The functional similarities common to all genomes, i.e., core genome, and unique gene clusters found only in a single genome were identified. Based upon 16S rRNA gene phylogenetic analysis and average nucleotide identity, the Sulfurospirillum draft genome was found to be most closely related to Sulfurospirillum cavolei. Characterization of the draft genome described herein provides pathway-specific details of the metabolic significance of the newly described Sulfurospirillum cavolei MES and, importantly, yields insight to the ecology of the genus as a whole. Comparison of eleven sequenced Sulfurospirillum genomes revealed a total of 6246 gene clusters in the pan-genome. Of the total gene clusters, 18.5% were shared among all eleven genomes and 50% were unique to a single genome. While most Sulfurospirillum spp. reduce nitrate to ammonium, five of the eleven Sulfurospirillum strains encode for a nitrous oxide reductase (nos) cluster with an atypical nitrous-oxide reductase, suggesting a utility for this genus in reduction of the nitrous oxide, and as a potential sink for this potent greenhouse gas.

Bringing High-Rate, CO2-Based Microbial Electrosynthesis Closer to Practical Implementation through Improved Electrode Design and Operating Conditions

The enhancement of microbial electrosynthesis (MES) of acetate from CO2 to performance levels that could potentially support practical implementations of the technology must go through the optimization of key design and operating conditions. We report that higher proton availability drastically increases the acetate production rate, with pH 5.2 found to be optimal, which will likely suppress methanogenic activity without inhibitor addition. Applied cathode potential as low as -1.1 V versus SHE still achieved 99% of electron recovery in the form of acetate at a current density of around -200 A m(-2). These current densities are leading to an exceptional acetate production rate of up to 1330 g m(-2) day(-1) at pH 6.7. Using highly open macroporous reticulated vitreous carbon electrodes with macropore sizes of about 0.6 mm in diameter was found to be optimal for achieving a good balance between total surface area available for biofilm formation and effective mass transfer between the bulk liquid and the electrode and biofilm surface. Furthermore, we also successfully demonstrated the use of a synthetic biogas mixture as carbon dioxide source, yielding similarly high MES performance as pure CO2. This would allow this process to be used effectively for both biogas quality improvement and conversion of the available CO2 to acetate.

Extracellular electron transfer from cathode to microbes: application for biofuel production

Extracellular electron transfer in microorganisms has been applied for bioelectrochemical synthesis utilizing microbes to catalyze anodic and/or cathodic biochemical reactions. Anodic reactions (electron transfer from microbe to anode) are used for current production and cathodic reactions (electron transfer from cathode to microbe) have recently been applied for current consumption for valuable biochemical production. The extensively studied exoelectrogenic bacteria Shewanella and Geobacter showed that both directions for electron transfer would be possible. It was proposed that gram-positive bacteria, in the absence of cytochrome C, would accept electrons using a cascade of membrane-bound complexes such as membrane-bound Fe-S proteins, oxidoreductase, and periplasmic enzymes. Modification of the cathode with the addition of positive charged species such as chitosan or with an increase of the interfacial area using a porous three-dimensional scaffold electrode led to increased current consumption. The extracellular electron transfer from the cathode to the microbe could catalyze various bioelectrochemical reductions. Electrofermentation used electrons from the cathode as reducing power to produce more reduced compounds such as alcohols than acids, shifting the metabolic pathway. Electrofuel could be generated through artificial photosynthesis using electrical energy instead of solar energy in the process of carbon fixation.

Biologically Produced Methane as a Renewable Energy Source

Methanogens are a unique group of strictly anaerobic archaea that are more metabolically diverse than previously thought. Traditionally, it was thought that methanogens could only generate methane by coupling the oxidation of products formed by fermentative bacteria with the reduction of CO₂. However, it has recently been observed that many methanogens can also use electrons extruded from metal-respiring bacteria, biocathodes, or insoluble electron shuttles as energy sources. Methanogens are found in both human-made and natural environments and are responsible for the production of ∼71% of the global atmospheric methane. Their habitats range from the human digestive tract to hydrothermal vents. Although biologically produced methane can negatively impact the environment if released into the atmosphere, when captured, it can serve as a potent fuel source. The anaerobic digestion of wastes such as animal manure, human sewage, or food waste produces biogas which is composed of ∼60% methane. Methane from biogas can be cleaned to yield purified methane (biomethane) that can be readily incorporated into natural gas pipelines making it a promising renewable energy source. Conventional anaerobic digestion is limited by long retention times, low organics removal efficiencies, and low biogas production rates. Therefore, many studies are being conducted to improve the anaerobic digestion process. Researchers have found that addition of conductive materials and/or electrically active cathodes to anaerobic digesters can stimulate the digestion process and increase methane content of biogas. It is hoped that optimization of anaerobic digesters will make biogas more readily accessible to the average person.

Effects of storage on mixed-culture biological electrodes

Storage methods are important to preserve the viability and biochemical characteristics of microbial cultures between experiments or during periods when bioreactors are inactive. Most of the research on storage has focused on isolates; however, there is an increasing interest in methods for mixed cultures, which are of relevance in environmental biotechnology. The purpose of this study was to investigate the effect of different storage methods on electrochemically active enrichment cultures. Acetate-oxidizing bioanodes generating a current density of about 5 A m⁻² were enriched in a microbial electrolysis cell. The effect of five weeks of storage was evaluated using electrochemical techniques and microbial community analysis. Storage by refrigeration resulted in quicker re-activation than freezing in 10% glycerol, while the bioelectrochemical activity was entirely lost after storage using dehydration. The results showed that the bioelectrochemical activity of bioanodes stored at low temperature could be retained. However, during the re-activation period the bioanodes only recovered 75% of the current density generated before storage and the bacterial communities were different in composition and more diverse after storage than before.

High Acetic Acid Production Rate Obtained by Microbial Electrosynthesis from Carbon Dioxide

High product specificity and production rate are regarded as key success parameters for large-scale applicability of a (bio)chemical reaction technology. Here, we report a significant performance enhancement in acetate formation from CO2, reaching comparable productivity levels as in industrial fermentation processes (volumetric production rate and product yield). A biocathode current density of -102 ± 1 A m(-2) and an acetic acid production rate of 685 ± 30 (g m(-2) day(-1)) have been achieved in this study. High recoveries of 94 ± 2% of the CO2 supplied as the sole carbon source and 100 ± 4% of electrons into the final product (acetic acid) were achieved after development of a mature biofilm, reaching an elevated product titer of up to 11 g L(-1). This high product specificity is remarkable for mixed microbial cultures, which would make the product downstream processing easier and the technology more attractive. This performance enhancement was enabled through the combination of a well-acclimatized and enriched microbial culture (very fast start-up after culture transfer), coupled with the use of a newly synthesized electrode material, EPD-3D. The throwing power of the electrophoretic deposition technique, a method suitable for large-scale production, was harnessed to form multiwalled carbon nanotube coatings onto reticulated vitreous carbon to generate a hierarchical porous structure.

Carbon dioxide reduction by mixed and pure cultures in microbial electrosynthesis using an assembly of graphite felt and stainless steel as a cathode

Carbon dioxide (CO2) reduction to multi-carbon compounds at the cathode using chemolithoautotrophs is an emerging application of microbial electrosynthesis (MES). In this study, CO2 reduction in MES was investigated at hydrogen evolving potentials, separately by a mixed culture and Clostridium ljungdahlii, using a graphite felt and stainless steel assembly as cathode. The mixed culture reactor produced acetate at the maximum rate of 1.3 mM d(-1), along with methane and hydrogen at -1.1 V/Ag/AgCl. Over 160 days of run-time in four fed-batches, 26% of bicarbonate was converted to acetate between day 28 and 41, whereas in the late batches, methane production prevailed. Out of 45 days of run-time in the C. ljungdahlii reactor, 2.4 mM d(-1) acetate production was achieved at -0.9 V/Ag/AgCl in Batch 1. Simultaneous product degradation occurred when the mixed culture was not selectively enriched. Hydrogen evolution is potentially the rapid way of transferring electrons to the biocatalysts for higher bioproduction rates.

An enriched electroactive homoacetogenic biocathode for the microbial electrosynthesis of acetate through carbon dioxide reduction

In the direction of generating value added chemicals from carbon dioxide (CO2) reduction through microbial electrosynthesis (MES), considering the crucial impact of the electrode material for the biofilm development and electron delivery, an attempt was made in this study to evaluate the efficiency of two different materials as biocathodes and their respective output in terms of electrosynthesis. The electrode material is a key component in the MES process. Several electrodes such as platinum, graphite foil, dimentionally stable anode (DSA) and graphite rod, and VITO-CoRE™ derived electrodes were tested for their suitability for ideal electrode combination in a three electrode cell setup. Bicarbonates (the dissolved form of CO2) was reduced to acetate by a selectively developed biocathode under a mild applied cathodic potential of -400 mV (vs. SHE) in 500 mL of single chamber MES cells operating for more than four months. Among the two electrode combinations evaluated, VITO-CoRE™-PL (VC-IS, plastic inert support) as the cathode and VITO-CoRE™-SS (VC-SS, stainless steel metal support) as the counter electrode showed higher production (4127 mg L(-1)) with a volumetric production rate of 0.569 kg per m(3) per d than the graphite rod (1523 mg L(-1)) with a volumetric production rate of 0.206 kg per m(3) per d. Contrary to the production efficiencies, the coulombic efficiency was higher with the second electrode combination (40.43%) than the first electrode combination (29.91%). Carbon conversion efficiency to acetate was higher for VC-IS (90.6%) than the graphite rod (82.0%).

Towards synthetic biological approaches to resource utilization on space missions

This paper demonstrates the significant utility of deploying non-traditional biological techniques to harness available volatiles and waste resources on manned missions to explore the Moon and Mars. Compared with anticipated non-biological approaches, it is determined that for 916 day Martian missions: 205 days of high-quality methane and oxygen Mars bioproduction with Methanobacterium thermoautotrophicum can reduce the mass of a Martian fuel-manufacture plant by 56%; 496 days of biomass generation with Arthrospira platensis and Arthrospira maxima on Mars can decrease the shipped wet-food mixed-menu mass for a Mars stay and a one-way voyage by 38%; 202 days of Mars polyhydroxybutyrate synthesis with Cupriavidus necator can lower the shipped mass to three-dimensional print a 120 m³ six-person habitat by 85% and a few days of acetaminophen production with engineered Synechocystis sp. PCC 6803 can completely replenish expired or irradiated stocks of the pharmaceutical, thereby providing independence from unmanned resupply spacecraft that take up to 210 days to arrive. Analogous outcomes are included for lunar missions. Because of the benign assumptions involved, the results provide a glimpse of the intriguing potential of ‘space synthetic biology’, and help focus related efforts for immediate, near-term impact.