Enhancing deep eutectic solvent systems for efficient fermentable sugar recovery from lignocellulosic fiber

Efficient conversion of sugars into fermentable sugars is a critical challenge in the cost-effective production of lignocellulosic biopolymers and biofuels. This study focuses on various sugar quantification techniques applied to Furcraea Foetida (Mauritius Hemp) samples, utilizing natural deep eutectic solvents (NADES) and deep eutectic solvents (DES) like urea, glycerol, citrates, pyrogallol (PY), and cetyltrimethylammonium bromide (CTAB). Employing a Taguchi-designed experiment, operational conditions were fine-tuned to evaluate the influence of time, concentration, and temperature on each deep eutectic solvent-based process. The emerging green solvent extraction approach demonstrated significant results, achieving notably high sugar yields compared to traditional techniques such as alkali, hot-water, and acid-mediated extraction. At a CTAB:PY molar ratio of 1:3, optimized for 60 min at 50 °C, the highest fermentable sugar (FS) yield of 0.6891 ± 0.0123 g FS/g LCB was attained-2 to 6 times higher than non-optimized values and 0.2 to 0.3 times higher than optimized traditional methods. In light of this, this research study emphasizes the pivotal significance of efficient sugar conversion through optimized deep eutectic solvent-based extraction methods, with a particular focus on Furcraea Foetida fibers, offering promising outcomes for the biofuel and biopolymer production industry.

Understanding microplastic pollution: Tracing the footprints and eco-friendly solutions

Microplastics (MPs) pollution has emerged as a critical environmental issue with far-reaching consequences for ecosystems and human health. These are plastic particles measuring <5 mm and are categorized as primary and secondary based on their origin. Primary MPs are used in various products like cosmetics, scrubs, body wash, and toothpaste, while secondary MPs are generated through the degradation of plastic products. These have been detected in seas, rivers, snow, indoor air, and seafood, posing potential risks to human health through the food chain. Detecting and quantifying MPs are essential to understand their distribution and abundance in the environment. Various microscopic (fluorescence microscopy, scanning electron microscopy) and spectroscopy techniques (FTIR, Raman spectroscopy, X-ray photoelectron spectroscopy) have been reported to analyse MPs. Despite the challenges in scalable removal methods, biological systems have emerged as promising options for eco-friendly MPs remediation. Algae, bacteria, and fungi have shown the potential to adsorb and degrade MPs in wastewater treatment plants (WWTPs) offering hope for mitigating this global crisis. This review examines the sources, impacts, detection, and biological removal of MPs, highlighting future directions in this crucial field of environmental conservation. By fostering global collaboration and innovative research a path towards a cleaner and healthier planet for future generations can be promised.

Microalgal biorefineries: Advancement in machine learning tools for sustainable biofuel production and value-added products recovery

The microalgae can be converted into biofuels, biochemicals, and bioactive compounds in a biorefinery. Recently, designing and executing more viable and sustainable biofuel production from microalgal biomass is one of the vital challenges in the development of biorefinery. Scalable cultivation of microalgae is mandatory for commercializing and industrializing the biorefinery. The intrinsic complication in cultivation of microalgae is the physiological and operational factors that renders challenging impact to enable a smooth and profitable operation. However, this aim can only be successful via a simulation prospect. Machine learning tools provides advanced approaches for evaluating, predicting, and controlling uncertainties in microalgal biorefinery for sustainable biofuel production. The present review provides a critical evaluation of the most progressing machine learning tools that validate a potential to be employed in microalgal biorefinery. These tools are highly potential for their extensive evaluation on microalgal screening and classification. However, the application of these tools for optimization of microalgal biomass cultivation in industries in order to increase the biomass production, is still in its initial stages. Integrated hybrid machine learning tools can aid the industries to function efficiently with least resources. Some of the challenges, and perspectives of machine learning tools are discussed. Besides, future prospects are also emphasized. Though, most of the research reports on machine learning tools are not appropriate to gather generalized information, standard protocols and strategies must be developed to design generalized machine learning tools. On a whole, this review offers a perspective information about digitalized microalgal exploitation in a microalgal biorefinery.

Recent progress in mineralization of emerging contaminants by advanced oxidation process: A review

Emerging contaminants are chemicals generated due to the usage of pesticide, endocrine disrupting compounds, pharmaceuticals, and personal care products and are liberated into the environment in trace quantities. The emerging contaminants eventually become a greater menace to living beings owing to their wide range and inhibitory action. To diminish these emerging contaminants from the environment, an Advanced Oxidation Process was considered as an efficient option. The Advanced Oxidation Process is an efficient method for mineralizing fractional or generous contaminants due to the generation of reactive species. The primary aim of this review paper is to provide a thorough knowledge on different Advanced Oxidation Process methods and to assess their mineralization efficacy of emerging contaminants. This study indicates the need for an integrated process for enhancing the treatment efficiency and overcoming the drawbacks of the individual Advanced Oxidation Process. Further, its application concerning technical and economic aspects is reviewed. Until now, most of the studies have been based on lab or pilot scale and do not represent the actual scenario of the emerging contaminant mineralization. Thus, the scaling up of the process was discussed, and the major challenges in large scale implementation were pointed out.

Biomass based biochar production approaches and its applications in wastewater treatment, machine learning and microbial sensors

Biochar is a stable carbonaceous material derived from various biomass and can be utilized as adsorbents, catalysts and precursors in various environmental applications. This review discusses various feedstock materials and methods of biochar production via traditional as well as modern approaches. Additionally, the biochar characteristics, HTC process, and its modification by employing steam and gas purging, acidic, basic / alkaline and organo-solvent, electro- and magnetic fields have been discussed. The recent biochar applications for real water, wastewater and industrial wastewater for the abstraction of environmental contaminants also reviewed. Moreover, applications in machine learning and microbial sensors were discussed. In the meantime, analyses on commercial and environmental profit, current ecological concerns and the future directions of biochar application have been well presented.

Microbial alchemy: upcycling of brewery spent grains into high-value products through fermentation

Spent grains are one of the lignocellulosic biomasses available in abundance, discarded by breweries as waste. The brewing process generates around 25-30% of waste in different forms and spent grains alone account for 80-85% of that waste, resulting in a significant global waste volume. Despite containing essential nutrients, i.e., carbohydrates, fibers, proteins, fatty acids, lipids, minerals, and vitamins, efficient and economically viable valorization of these grains is lacking. Microbial fermentation enables the valorization of spent grain biomass into numerous commercially valuable products used in energy, food, healthcare, and biomaterials. However, the process still needs more investigation to overcome challenges, such as transportation, cost-effective pretreatment, and fermentation strategy. to lower the product cost and to achieve market feasibility and customer affordability. This review summarizes the potential of spent grains valorization via microbial fermentation and associated challenges.

Current advances and emerging trends in sustainable polyhydroxyalkanoate modification from organic waste streams for material applications

The current processes for producing polyhydroxyalkanoates (PHAs) are costly, owing to the high cost of cultivation feedstocks, and the need to sterilise the growth medium, which is energy-intensive. PHA has been identified as a promising biomaterial with a wide range of potential applications and its functionalization from waste streams has made significant advances recently, which can help foster the growth of a circular economy and waste reduction. Recent developments and novel approaches in the functionalization of PHAs derived from various waste streams offer opportunities for addressing these issues. This study focuses on the development of sustainable, efficient, and cutting-edge methods, such as advanced bioprocess engineering, novel catalysts, and advances in materials science. Chemical techniques, such as epoxidation, oxidation, and esterification, have been employed for PHA functionalization, while enzymatic and microbial methods have indicated promise. PHB/polylactic acid blends with cellulose fibers showed improved tensile strength by 24.45-32.08 % and decreased water vapor and oxygen transmission rates while PHB/Polycaprolactone blends with a 1:1 ratio demonstrated an elongation at break four to six times higher than pure PHB, without altering tensile strength or elastic modulus. Moreover, PHB films blended with both polyethylene glycol and esterified sodium alginate showed improvements in crystallinity and decreased hydrophobicity.

Green chemical and hybrid enzymatic pretreatments for lignocellulosic biorefineries: Mechanism and challenges

The greener chemical and enzymatic pretreatments for lignocellulosic biomasses are portraying a crucial role owing to their recalcitrant nature. Traditional pretreatments lead to partial degradation of lignin and hemicellulose moieties from the pretreated biomass. But it still restricts the enzyme accessibility for the digestibility towards the celluloses and the interaction of lignin-enzymes, nonproductively. Moreover, incursion of certain special chemical treatments and other lignin sulfonation techniques to the enzymatic pretreatment (hybrid enzymatic pretreatment) enhances the lignin structural modification, solubilization of the hemicelluloses and both saccharification and fermentation processes (SAF). This article concentrates on recent developments in various chemical and hybrid enzymatic pretreatments on biomass materials with their mode of activities. Furthermore, the issues on strategies of the existing pretreatments towards their industrial applications are highlighted, which could lead to innovative ideas to overcome the challenges and give guideline for the researchers towards the lignocellulosic biorefineries.

Effect of thermal-calcium peroxide mediated exopolymer release on disperser pre-treatment for efficient anaerobic digestion

The present study aimed to improve the hydrolysis potential of paper mill sludge through a two-phase disintegration process. In Particular, attention was focused on removal of extracellular polymeric substance (EPS) i.e. deflocculation of sludge in order to improve the efficiency of subsequent disperser disintegration. During deflocculation, carbohydrate, protein and deoxyribonucleic acids (DNA) were used as assessment parameters. During disintegration, soluble chemical oxygen demand (SCOD) and suspended solids (SS) reduction were used as assessment index to evaluate the efficiency of disintegration. A greater EPS removal was attained while deflocculating the sludge at calcium peroxide dosage of 0.05 g/g suspended solids (SS) and at a temperature of 70 °C. When comparing the disintegrated samples, a clear variation was noted in deflocculated and disintegrated sludge (19.2%) than the disintegrated sludge alone (13.5%). This clearly shows the need for deflocculation prior to disintegration. Likewise, a higher biomethane production of 0.214 L/g COD was achieved in deflocculated and disintegrated sludge than the pretreated sludge alone. Deflocculation reduces sludge management cost from 170 USD (Disperser alone (D alone disintegration)) to 51 USD (Thermal calcium peroxide mediated-Disperser (TCaO2-D disintegration), indicating the efficiency of the proposed disintegration.

A review on the pollution assessment of hazardous materials and the resultant biorefinery products in Palm oil mill effluent

The voluminous nature of palm oil mill effluent (POME) is directly associated with environmental hazards and could be turned into biorefinery products. The POME, rich in BOD, COD, and oil and grease, with few hazardous materials such as siloxanes, fatty acid methyl ester, and phenolic compounds that may significantly increase the risk of violating the effluent quality standards. Recently, the application of chemical and biological risk assessment that can use electrochemical sensors and microalgae-like species has gained paramount attention towards its remediation. This review describes the existing risk assessment for POME and recommends a novel assessment approach using fish species including invasive ones as suitable for identifying the toxicants. Various physico-chemical and biological treatments such as adsorption, coagulation-flocculation, photo-oxidation, solar-assisted extraction, anaerobic digestion, integrated anaerobic-aerobic, and microalgae cultivation has been investigated. This paper offers an overview of anaerobic technologies, with particular emphasis on advanced bioreactors and their prospects for industrial-level applications. To illustrate, palmitic acid and oleic acid, the precursors of fatty acid methyl ester found in POME pave the way to produce biodiesel with 91.45%. Although there are some challenges in attaining production at an economic scale, this review offers some opportunities that could help in overcoming these challenges.

Life Cycle Assessment of Microbial 2,3-Butanediol Production from Brewer's Spent Grain Modeled on Pinch Technology

Microbial production of 2,3-butanediol (BDO) has received considerable attention as a promising alternate to fossil-derived BDO. In our previous work, BDO concentration >100 g/L was accumulated using brewer's spent grain (BSG) via microbial routes which was followed by techno-economic analysis of the bioprocess. In the present work, a life cycle assessment (LCA) was conducted for BDO production from the fermentation of BSG to identify the associated environmental impacts. The LCA was based on an industrial-scale biorefinery processing of 100 metric tons BSG per day modeled using ASPEN plus integrated with pinch technology, a tool for achieving maximum thermal efficiency and heat recovery from the process. For the cradle-to-gate LCA, the functional unit of 1 kg of BDO production was selected. One-hundred-year global warming potential of 7.25 kg CO₂/kg BDO was estimated while including biogenic carbon emission. The pretreatment stage followed by the cultivation and fermentation contributed to the maximum adverse impacts. Sensitivity analysis revealed that a reduction in electricity consumption and transportation and an increase in BDO yield could reduce the adverse impacts associated with microbial BDO production.

Oxidative torrefaction of microalgae Chlorella sorokiniana: Process optimization by central composite design

Microalgae are currently not viable as solid biofuels owing to their poor raw fuel properties. Torrefaction under oxidative media offers a cost-effective and energy-efficient process to address these drawbacks. A design of experiment was conducted using central composite design with three factors: temperature (200, 250, and 300 °C), time (10, 35, and 60 min), and O₂ concentration (3, 12, and 21 vol%). The responses were solid yield, energy yield, higher heating value, and onset temperatures at 50% and 90% carbon conversion determined from thermogravimetric analysis. Temperature and time significantly affected all responses, while O₂ concentration only affected higher heating value, energy yield and thermodegradation temperature at 90% conversion. Oxidative torrefaction of microalgae is recommended to be conducted at 200 °C, 10.6 min, 12% O₂ where the energy yield and enhancement factor are 98.73% and 1.08, respectively. It is also more reactive under an air environment compared to inert torrefaction conditions.

Fermentative valorisation of xylose-rich hemicellulosic hydrolysates from agricultural waste residues for lactic acid production under non-sterile conditions

Lactic acid (LA) is a platform chemical with diverse industrial applications. Presently, commercial production of LA is dominated by microbial fermentation using sugary or starch-based feedstocks. Research pursuits emphasizing towards sustainable production of LA using non-edible and renewable feedstocks have accelerated the use of lignocellulosic biomass (LCB). The present study focuses on the valorisation of xylose derived from sugarcane bagasse (SCB) and olive pits (OP) through hydrothermal and dilute acid pretreatment, respectively. The xylose-rich hydrolysate obtained was used for LA production by homo-fermentative and thermophilic Bacillus coagulans DSM2314 strain under non-sterile conditions. The fed-batch mode of fermentation resulted in maximum LA titers of 97.8, 52.4 and 61.3 g/L with a yield of 0.77, 0.66 and 0.71 g/g using pure xylose, xylose-rich SCB and OP hydrolysates, respectively. Further, a two-step aqueous two-phase system (ATPS) extraction technique was employed for the separation and recovery of LA accumulated on pure and crude xylose. The LA recovery was 45 - 65% in the first step and enhanced to 80-90% in the second step.The study demonstrated an efficient integrated biorefinery approach to valorising the xylose-rich stream for cost-effective LA production and recovery.

Antimicrobial Efficacy of Blended Essential Oil and Chlorhexidine against Periodontal Pathogen (P.gingivalis)-An In Vitro Study

Background

Essential oils (EOs) have a considerable amount of therapeutic and preventive effect in treating dental diseases due to their wider potential as antibacterial and anti-inflammatory agents. EOs like virgin coconut oil, eucalyptus oil, peppermint oil thyme oil, and clove oil, when used in combination, may further have enhanced antimicrobial effects. However, limited information exists on the synergistic effect of these oils when used in combination, especially on the primary periodontal pathogen Porphyromonas gingivalis.

Aim

The current study aims to compare the antimicrobial efficacy of commercially available EO on the periodontal pathogen, P. gingivalis, in comparison to chlorhexidine (CHX).

Materials and Methods

Antimicrobial efficacy of EO and CHX was assessed at various concentrations against the periodontal pathogen P. gingivalis, by evaluating the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC).

Results

P. gingivalis was seen to be sensitive at a MIC of 100 μg/ml and 50 μg/ml concentration of the EO, which is regarded as the MIC of EO against P. gingivalis and CHX effectively inhibited microbial growth at 0.4 μg/ml.

Conclusion

A combination of EOs possesses a potent antibacterial activity against P. gingivalis, and the antibacterial efficacy increases with increasing concentration of EOs.

Combined sodium citrate and ultrasonic pretreatment of waste activated sludge for cost effective production of biogas

This study aimed to pretreat the waste activated sludge (WAS) by ultrasonication in an energy efficient way by combining sodium citrate with ultrasonic pretreatment at 0.03 g/g suspended solids (SS) of dosage. The ultrasonic pretreatment was done at various (20-200 W) power levels, sludge concentration (7 to 30 g/L), sodium citrate dosages (0.01 to 0.2 g/g SS). An elevated COD solubilization of 26.07 ± 0.6 % was achieved by combined pretreatment at a treatment time of 10 min, ultrasonic power level of 160 W when compared to individual ultrasonic pretreatment (18.6 ± 0.5 %). A higher biomethane yield of 0.26 ± 0.009 L/g COD was achieved in sodium citrate combined ultrasonic pretreatment (SCUP) than ultrasonic pretreatment (UP) 0.145 ± 0.006 L/g COD. Almost 50% of the energy can be saved through SCUP when compared to UP. Future study evaluating SCUP in continuous mode anaerobic digestion is vital.

Sustainable Valorization of Bioplastic Waste: A Review on Effective Recycling Routes for the Most Widely Used Biopolymers

Plastics-based materials have a high carbon footprint, and their disposal is a considerable problem for the environment. Biodegradable bioplastics represent an alternative on which most countries have focused their attention to replace of conventional plastics in various sectors, among which food packaging is the most significant one. The evaluation of the optimal end-of-life process for bioplastic waste is of great importance for their sustainable use. In this review, the advantages and limits of different waste management routes-biodegradation, mechanical recycling and thermal degradation processes-are presented for the most common categories of biopolymers on the market, including starch-based bioplastics, PLA and PBAT. The analysis outlines that starch-based bioplastics, unless blended with other biopolymers, exhibit good biodegradation rates and are suitable for disposal by composting, while PLA and PBAT are incompatible with this process and require alternative strategies. The thermal degradation process is very promising for chemical recycling, enabling building blocks and the recovery of valuable chemicals from bioplastic waste, according to the principles of a sustainable and circular economy. Nevertheless, only a few articles have focused on this recycling process, highlighting the need for research to fully exploit the potentiality of this waste management route.

Microbial Exopolysaccharide Composites in Biomedicine and Healthcare: Trends and Advances

Microbial exopolysaccharides (EPSs), e.g., xanthan, dextran, gellan, curdlan, etc., have significant applications in several industries (pharma, food, textiles, petroleum, etc.) due to their biocompatibility, nontoxicity, and functional characteristics. However, biodegradability, poor cell adhesion, mineralization, and lower enzyme activity are some other factors that might hinder commercial applications in healthcare practices. Some EPSs lack biological activities that make them prone to degradation in ex vivo, as well as in vivo environments. The blending of EPSs with other natural and synthetic polymers can improve the structural, functional, and physiological characteristics, and make the composites suitable for a diverse range of applications. In comparison to EPS, composites have more mechanical strength, porosity, and stress-bearing capacity, along with a higher cell adhesion rate, and mineralization that is required for tissue engineering. Composites have a better possibility for biomedical and healthcare applications and are used for 2D and 3D scaffold fabrication, drug carrying and delivery, wound healing, tissue regeneration, and engineering. However, the commercialization of these products still needs in-depth research, considering commercial aspects such as stability within ex vivo and in vivo environments, the presence of biological fluids and enzymes, degradation profile, and interaction within living systems. The opportunities and potential applications are diverse, but more elaborative research is needed to address the challenges. In the current article, efforts have been made to summarize the recent advancements in applications of exopolysaccharide composites with natural and synthetic components, with special consideration of pharma and healthcare applications.

Microalgae gasification over Ni loaded perovskites for enhanced biohydrogen generation

Steam gasification of microalgae upon perovskite oxide-supported nickel (Ni) catalysts was carried out for H₂-rich gas production. Ni-perovskite oxide catalysts with partial substitution of B in perovskite structures (Ni/CaZrO₃, Ni/Ca(Zr_0.8Ti_0.2)O₃, and Ni/Ca(Zr_0.6Ti_0.4)O₃) were synthesized and compared with those of the Ni/Al₂O₃ catalyst. The perovskite oxide supports improved Ni dispersion by reducing the particle size and strengthening the Ni-support interaction. Higher gas yields and H₂ selectivity were obtained using Ni-perovskite oxide catalysts rather than Ni/Al₂O₃. In particular, Ni/Ca(Zr_0.8Ti_0.2)O₃ showed the highest activity and selectivity for H₂ production because of the synergetic effect of metallic Ni and elements present in the perovskite structures caused by high catalytic activity coupled with enhanced oxygen mobility. Moreover, increasing the temperature promoted the yield of gas and H₂ content. Overall, considering the outstanding advantages of perovskite oxides as supports for Ni catalysts is a promising prospect for H₂ production via gasification technology.

Lignocellulosic biomass conversion via greener pretreatment methods towards biorefinery applications

Lignocellulose biomass during pretreatment releases various compounds, among them the most important is reducing sugars, which can be utilized for the production of biofuels and some other products. Thereby, innovative greener pretreatment techniques for lignocellulosic materials have been considered to open a new door in the aspects of digestibility of the rigid carbohydrate-lignin matrix to reduce the particle size and remove hemicellulose/lignin contents to successfully yield valid bioproducts. This article reviews about the composition of lignocelluloses and emphasizes various green pretreatments viz novel green solvent-based IL and DES steam explosion, supercritical carbon dioxide explosion (Sc-CO2) and co-solvent enhanced lignocellulosic fractionation (CELF) along with suitable mechanistic pathway of LCB pretreatment process. Finally, this article concludes that the existing pretreatments should be redesigned to conquer the demands by large scale production and suggests combined pretreatment methods to carry out various biomass pre-processing.

Augmentation in polyhydroxybutyrate and biogas production from waste activated sludge through mild sonication induced thermo-fenton disintegration

In this study, an innovative approach was developed to enhance the hydrolysis through phase-separated pretreatment by removing exopolymeric substances via mild sonication followed by thermo-Fenton disintegration. The exopolymeric substances fragmentation was enhanced at the sonic specific energy input of 2.58 kJ/kg total solids. After exopolymeric substance removal, the disintegration of biomass by thermo-Fenton yield the solubilization of 29.8 % at Fe²⁺:H₂O₂ dosage and temperature of 0.009:0.036 g/g suspended solids and 80 °C as compared to thermo-Fenton alone disintegration. The polyhydroxybutyrate content of 93.1 % was accumulated by Bacillus aryabhattai at the optimum time of 42 h, while providing 70 % (v/v) pre-treated supernatant as a carbon source under nutrient-limiting condition. Moreover, the biogas generation of 0.187 L/g chemical oxygen demand was achieved using settled pretreated sludge. The pretreated sludge sample thus served as a carbon source for polyhydroxybutyrate producers as well as substrate for biogas production.

A review on current advances in the energy and cost effective pretreatments of algal biomass: Enhancement in liquefaction and biofuel recovery

The main downside of utilizing algal biomass for biofuel production is the rigid cell wall which confines the availability of soluble organics to hydrolytic microbes during biofuel conversion. This constraint reduces the biofuel production efficiency of algal biomass. On the other hand, presenting various pretreatment methods before biofuel production affords cell wall disintegration and enhancement in biofuel generation. The potential of pretreatment methods chiefly relies on the extent of biomass liquefaction, energy, and cost demand. In this review, different pretreatments employed to disintegrate algal biomass were conferred in depth with detailed information on their efficiency in enhancing liquefaction and biofuel yield for pilot-scale implementation. Based on this review, it has been concluded that combinative and phase-separated pretreatments provide virtual input in enhancing the biofuel generation based on liquefaction potential, energy, and cost. Future studies should focus on decrement in cost and energy requirement of pretreatment in depth.

Bread waste - A potential feedstock for sustainable circular biorefineries

The management of staggering volume of food waste generated (∼1.3 billion tons) is a serious challenge. The readily available untapped food waste can be promising feedstock for setting up biorefineries and one good example is bread waste (BW). The current review emphasis on capability of BW as feedstock for sustainable production of platform and commercially important chemicals. It describes the availability of BW (>100 million tons) to serve as a feedstock for sustainable biorefineries followed by examples of platform chemicals which have been produced using BW including ethanol, lactic acid, succinic acid and 2,3-butanediol through biological route. The BW-based production of these metabolites is compared against 1G and 2G (lignocellulosic biomass) feedstocks. The review also discusses logistic and supply chain challenges associated with use of BW as feedstock. Towards the end, it is concluded with a discussion on life cycle analysis of BW-based production and comparison with other feedstocks.

Technological advances in the production of carotenoids and their applications- A critical review

Carotenoids are naturally occurring pigments that are widely distributed in algae, fungi, bacteria, and plants. Carotenoids play a significant role in the food, feed, cosmetic, nutraceutical, and pharmaceutical industries. These pigments are effectively considered as a health-promoting compounds, which are widely used in our daily diet to reduce the risk of chronic diseases such as cardiovascular diseases, cancer, acute lung injury, cataracts, neural disorders, etc. In this context, this review paper demonstrates the synthesis of carotenoids and their potential application in the food and pharmaceutical industries. However, the demand for carotenoid production is increasing overtime, and the extraction and production are expensive and technically challenging. The recent developments in carotenoid biosynthesis, and key challenges, bottlenecks, and future perspectives were also discussed to enhance the circular bioeconomy.

Recent advances in biowaste management towards sustainable environment

Bio-wastes and their utilization has been increasing enormously, due to its generation and management practices towards making the clearner environment. Bio-waste disposal that follow the emerging global human population has commended the hunt to certain methods sustainably for the bio-waste management to overwhelmed the ecological issues, prompted by means of the collection of such waste materials. The bio-conversion process of the various bio-wastes into high value added products seems to be practicable in various venues in terms of technological and financial supports. Thereby, this preface presentat about of bio-wastes management and new trends towards circular economy and challenges to acheive it by considering the Virtual Special Issue (VSI) dedicated in Bioresourse Technology Journal.

Algal biomass to biohydrogen: Pretreatment, influencing factors, and conversion strategies

Hydrogen has gained attention as an alternative source of energy because of its non-polluting nature as on combustion it produces only water. Biological methods are eco-friendly and have benefits in waste management and hydrogen production simultaneously. The use of algal biomass as feedstock in dark fermentation is advantageous because of its low lignin content, high growth rate, and carbon-fixation ability. The major bottlenecks in biohydrogen production are its low productivity and high production costs. To overcome these issues, many advances in the area of biomass pretreatment to increase sugar release, understanding of algal biomass composition, and development of fermentation strategies for the complete recovery of nutrients are ongoing. Recently, mixed substrate fermentation, multistep fermentation, and the use of nanocatalysts to improve hydrogen production have increased. This review article evaluates the current progress in algal biomass pretreatment, key factors, and possible solutions for increasing hydrogen production.

Valorization of nano-based lignocellulosic derivatives to procure commercially significant value-added products for biomedical applications

Biowaste, produced from nature, is preferred to be a good source of carbon and ligninolytic machinery for many microorganisms. They are complex biopolymers composed of lignin, cellulose, and hemicellulose traces. This biomass can be depolymerized to its nano-dimensions to gain exceptional properties useful in the field of cosmetics, pharmaceuticals, high-strength materials, etc. Nano-sized biomass derivatives overcome the inherent drawbacks of the parent material and offer promises as a potential material for a wide range of applications with their unique traits such as low-toxicity, biocompatibility, biodegradability and environmentally friendly nature with versatility. This review focuses on the production of value-added products feasible from nanocellulose, nano lignin, and xylan nanoparticles which is quite a novel study of its kind. Dawn of nanotechnology has converted bio waste by-products (hemicellulose and lignin) into useful precursors for many commercial products. Nano-cellulose has been employed in the fields of electronics, cosmetics, drug delivery, scaffolds, fillers, packaging, and engineering structures. Xylan nanoparticles and nano lignin have numerous applications as stabilizers, additives, textiles, adhesives, emulsifiers, and prodrugs for many polyphenols with an encapsulation efficiency of 50%. This study will support the potential development of composites for emerging applications in all aspects of interest and open up novel paths for multifunctional biomaterials in nano-dimensions for cosmetic, drug carrier, and clinical applications.

Enhanced biohydrogen generation through calcium peroxide engendered efficient ultrasonic disintegration of waste activated sludge in low temperature environment

Waste activated sludge is a renewable source for biohydrogen production, whereas the presence of complex biopolymers limits the hydrolysis step during this process, and thus pretreatment is required to disintegrate the sludge biomass. In this study, the feasibility of utilizing waste activated sludge to produce biohydrogen by improving the solubilization by means of thermo CaO₂ engendered sonication disintegration (TCP-US) was studied. The optimized condition for extracellular polymeric substance (EPS) dissociation was obtained at the CaO₂ dosage of 0.05 g/g SS at 70 °C. The maximum disintegration after EPS removal was achieved at the sonic specific energy input of 1612.8 kJ/kg TS with the maximum solubilization and SS reduction of 23.7% and 18.14%, respectively, which was higher than the US alone pretreatment. Thus, this solubilization yields higher biohydrogen production of 114.3 mLH₂/gCOD in TCP-US sample.

Production and recovery of polyhydroxyalkanoates (PHA) from waste streams - A review

Polyhydroxyalkanoates (PHA) are the more attractive sustainable green plastic, and it has the potential to replace petroleum-based plastics (PBP) in the global market. Recently, most of the developed and developing countries have banned the use of traditional PBP. This increases the demand for green plastic production and positively impacts the global market. Producing green plastic from various waste streams such as whey, animal, and crude glycerol will be eco-friendly and cost-effective. However, the factors influencing the environmental sustainability of PHA production from different waste streams are still unclear. This review could be reinforced concrete to researchers to gather deep knowledge on techno-economic analysis, life-cycle assessment, environmental and ecological risks caused during PHA production from different waste streams.

Integrated biorefineries for repurposing of food wastes into value-added products

Food waste (FW) generated through various scenarios from farm to fork causes serious environmental problems when either incinerated or disposed inappropriately. The presence of significant amounts of carbohydrates, proteins, and lipids enable FW to serve as sustainable and renewable feedstock for the biorefineries. Implementation of multiple substrates and product biorefinery as a platform could pursue an immense potential of reducing costs for bio-based process and improving its commercial viability. The review focuses on conversion of surplus FW into range of value-added products including biosurfactants, biopolymers, diols, and bioenergy. The review includes in-depth description of various types of FW, their chemical and nutrient compositions, current valorization techniques and regulations. Further, it describes limitations of FW as feedstock for biorefineries. In the end, review discuss future scope to provide a clear path for sustainable and net-zero carbon biorefineries.

Algal biorefinery towards decarbonization: Economic and environmental consideration

Algae biomass contains various biological elements, including lipids, proteins, and carbohydrates, making it a viable feedstock for manufacturing biofuels. However, the biggest obstacle to commercializing algal biofuels is their high production costs, primarily related to an algae culture. The extraction of additional high value added bioproducts from algal biomass is thus required to increase the economic viability of producing algae biofuel. This study aims to discuss the economic benefits of a zero-carbon economy and an environmentally sustainable algae resource in decarbonizing the environment through the manufacture of algal-based biofuels from algae biomass for a range of potential uses. In addition, research on the algae biorefineries, with an emphasis on case studies for various cultivation methods, as well as the commercialization of biofuel and bioenergy. Overall, the algal biorefinery offers fresh potential for synthesizing various products.

Phase separated pretreatment strategies for enhanced waste activated sludge disintegration in anaerobic digestion: An outlook and recent trends

A significant ecological problem was developed on disposing the enormous amounts of waste activated sludge (WAS) produced by traditional wastewater treatment. There have been various attempts recently originated to develop innovative methods for substantial sludge treatment. The most frequently used approach for treating sludge to produces methane and reduces sludge is anaerobic treatment. The hydrolysis phase in WAS limits the breakdown of complex macrobiotic compounds. The presence of extracellular polymeric substances (EPS) in biomass prevents the substrate from being hydrolyzed. Enhancing substrate hydrolysis involves removal of EPS preceded by phase separated pretreatment. Hence, a critical assessment of various phase separated pretreatment that has a remarkable effect on the anaerobic digestion process was documented in detail. Moreover, the economic viability and energy requirement of this treatment process was also discussed. Perspectives and recommendations for methane production were also provided to attain effectual sludge management.

Lignocellulose biohydrogen towards net zero emission: A review on recent developments

This review mainly determines novel and advance physical, chemical, physico-chemical, microbiological and nanotechnology-based pretreatment techniques in lignocellulosic biomass pretreatment for bio-H2 production. Further, aim of this review is to gain the knowledge on the lignocellulosic biomass pretreatment and its priority on the efficacy of bio-H2 and positive findings. The influence of various pretreatment techniques on the structure of lignocellulosic biomass have presented with the pros and cons, especially about the cellulose digestibility and the interference by generation of inhibitory compounds in the bio-enzymatic technique as such compounds is toxic. The result implies that the stepwise pretreatment technique only can ensure eventually the lignocellulosic biomass materials fermentation to yield bio-H2. Though, the mentioned pretreatment steps are still a challenge to procure cost-effective large-scale conversion of lignocellulosic biomass into fermentable sugars along with low inhibitory concentration.

Perfectly antimagic total graphs

An one-one correspondence function λ from V (G) ∪ E (G) to the set {1, 2, …, |V (G) | + |E (G) |} is a total labeling of a finite undirected graph G without loops and multiple edges, where |V (G) |and |E (G) | are the cardinality of vertex and edge set of G respectively. A perfectly antimagic total labeling is a totally antimagic total labeling whose vertex and edge-weights that are also pairwise distint. Perfectly antimagic total (PAT) graph is a graph having such labeling. The topic of discovering perfectly antimagic total labeling of some families of graphs is discussed in this paper. We also came up with certain conclusions about dual of a perfectly antimagic total graphs. Finally, we provided that the necessary and sufficient condition for a dual of a regular and irregular PAT graph to be a PAT graph.

Dispersion assisted pretreatment for enhanced anaerobic biodegradability and biogas recovery -strategies and applications

Disperser assisted homogenization is a promising mechanical based disintegration process to improve the substrate biodegradability and biogas recovery from biomass. During dispersion, the extent of liquefaction relies on the dispersion parameters and biomass properties. Hence, assessment of the optimal parameters varies with type of disperser and biomass. Dispersion assisted homogenization of some biomass such as sludge is not only studied in lab scale but also investigated in full scale plants providing positive outcome. For instance, the large-scale investigation of disperser homogenization has attained nearly 40-50 percent increment in bioenergy recovery. However, research gaps in terms of energy and cost efficiency still exists. This review paper outlines the impact of disperser parameters, its efficiency in biomass disintegration and biogas recovery. It has been proposed to combine homogenization process in the bioenergy generation to investigate the energy and cost efficiency of the entire process.

Efficiency of various biofilm carriers and microbial interactions with substrate in moving bed-biofilm reactor for environmental wastewater treatment

In a moving bed-biofilm reactor (MBBR), the fluidization efficiency, immobilization of microbial cells, and treatment efficiency are directly influenced by the shape and pores of biofilm carriers. Moreover, the efficacy of bioremediation mainly depends on their interaction interface with microbes and substrate. This review aims to comprehend the role of different carrier properties such as material shapes, pores, and surface area on bioremediation productivity. A porous biofilm carrier with surface ridges containing spherical pores sizes > 1 mm can be ideal for maximum efficacy. It provides diverse environments for cell cultures, develops uneven biofilms, and retains various cell sizes and biomass. Moreover, the thickness of biofilm and controlled scaling shows a significant impact on MBBR performance. Therefore, the effect of these parameters in MBBR is discussed detailed in this review, through which existing literature and technical strategies that focus on the surface area as the primary factor can be critically assessed.

Recent developments in biorefining of macroalgae metabolites and their industrial applications - A circular economy approach

The macroalgal industry is expanding, and the quest for novel ingredients to improve and develop innovative products is crucial. Consumers are increasingly looking for natural-derived ingredients in cosmetic products that have been proven to be effective and safe. Macroalgae-derived compounds have growing popularity in skincare products as they are natural, abundant, biocompatible, and renewable. Due to their high biomass yields, rapid growth rates, and cultivation process, they are gaining widespread recognition as potentially sustainable resources better suited for biorefinery processes. This review demonstrates macroalgae metabolites and their industrial applications in moisturizers, anti-aging, skin whitening, hair, and oral care products. These chemicals can be obtained in combination with energy products to increase the value of macroalgae from an industrial perspective with a zero-waste approach by linking multiple refineries. The key challenges, bottlenecks, and future perspectives in the operation and outlook of macroalgal biorefineries were also discussed.

Comparison of alkali and ionic liquid pretreatment methods on the biochemical methane potential of date palm waste biomass

Date palm waste biomass is a readily accessible agricultural waste biomass that may be used to produce biogas. Because the complex structure of date palm waste biomass prevents the embedded holo-cellulosic sugars from biodegrading, pretreatment is required to increase methane (CH₄) yield. The present investigation aimed to comparatively determine the impact of alkali and ionic liquid pretreatment on the biochemical methane potential (BMP) of different types of date palm waste biomass. The findings revealed that ionic liquid pretreated Palm and Fruit bunch showed the highest BMP (321.67 mL CH₄/g-TS) and substrate conversion efficiency (68.01%), respectively, over other biomass samples. In alkali pretreatment, the highest BMP and substrate conversion efficiency were detected with Palm (309.76 mL CH₄/g-TS) and Spathe (62.09%). The high BMP and substrate conversion efficiency of date palm waste biomass may be harnessed for bioenergy production when this ionic liquid pretreatment technology is used.

Effective recovery of microalgal biomass using various types of emulsion polymers

Microalgae biomass has been considered as one of the potential feedstocks in biofuel production. Yet, biomass harvesting poses a challenge to the overall production cost due to its low cell density. Flocculation has been marked as one of the promising processes in microalgae harvesting technology. In this study, the first screening of two anionic (A-230, and A-330E) and five cationic polymers (C-810E, C-810EL, C-810EB, C-810ELH, and C-810EMB) followed by gravity settling with the mixed microalgae concentration of 2.24 g_TSS/L revealed that anionic polymers are less effective. Whereas all cationic polymers achieved above 90% harvesting efficiency. Therefore, the maximum mass recovery of 98.7% with 86.8 g_TSS/L sediment content was achieved by adjusting pH to 6-0.6 mL/L (115.178 mg/g_biomass) of C-810E followed by 15-min settling. The cationic polymer addition followed by settling would enable cost-effective downstream processing of microalgal biomass.

Progress in microalgal mediated bioremediation systems for the removal of antibiotics and pharmaceuticals from wastewater

Worldwide demand for antibiotics and pharmaceutical products is continuously increasing for the control of disease and improvement of human health. Poor management and partial metabolism of these compounds result in the pollution of aquatic systems, leading to hazardous effects on flora, fauna, and ecosystems. In the past decade, the importance of microalgae in micropollutant removal has been widely reported. Microalgal systems are advantageous as their cultivation does not require additional nutrients: they can recover resources from wastewater and degrade antibiotics and pharmaceutical pollutants simultaneously. Bioadsorption, degradation, and accumulation are the main mechanisms involved in pollutant removal by microalgae. Integration of microalgae-mediated pollutant removal with other technologies, such as biodiesel, biochemical, and bioelectricity production, can make this technology more economical and efficient. This article summarizes the current scenario of antibiotic and pharmaceutical removal from wastewater using microalgae-mediated technologies.

073 Posterior reversible encephalopathy syndrome (PRES) complicating anti-NMDA receptor encephalitis (NMDARE) with ovarian teratoma

Introduction

Anti-N-methyl-D-aspartate receptor antibody-associated encephalitis (NMDARE) is a form of autoimmune encephalitis typically affecting young women, often associated with an ovarian teratoma. Clinical features include psychiatric disturbances, seizures, dyskinesia, dysautonomia, and cardiac dys- rhythmias. Here we present a case of NMDARE complicated by posterior reversible encephalopathy syndrome (PRES). This complication has not been reported previously.

Case

A 17-year-old girl presented with acute psychosis. The neurological examination was unremark- able. MRI brain revealed left hippocampal T2 signal hyperintensity; there was a CSF lymphocytosis. NMDA-receptor antibodies in serum and CSF were detected and intravenous methylprednisolone was commenced. Progressive agitation lead to ITU admission. Plasma exchange and intravenous immuno- globulins were administered. MRI pelvis revealed a left ovarian cyst which was removed (laparoscopic salpingo-oophrectomy). Gross inspection and histopathology confirmed an ovarian teratoma. Persistently elevated blood pressure was noted for a week on ITU, associated with clinical deterioration. Rituximab was administered. A repeat MRI brain the next day revealed hyperintensities in temporo-parietal and occipital regions consistent with PRES. The second dose of rituximab was withheld. Clinical and radiologi- cal improvement was noted after a week, and the patient was discharged home.

Discussion

Encephalitis mediated dysautonomia may lead to disruption of cerebral autoregulation cul- minating in PRES. The administration of rituximab may also have contributed. This case exemplifies the uncommon complications associated with NMDARE.

dr.dvinayan@gmail.com

Cardiovascular disease risk factors and outcomes of acute myocardial infarction in young adults in two nationwide cohorts in the united states

Funding Acknowledgements

Type of funding sources: None.

Background

Acute myocardial infarction (AMI) can have considerable morbidity and devastating socioeconomic and psychological consequences in young adults. Previous studies reveal that the decline in mortality in AMI has mainly been in the older population while being comparatively less significant in younger patients. This study compares young adults (18 to 44 years) hospitalized with AMI across two nationwide cohorts, 2007 and 2017, in the United States (US). It examines the burden of AMI hospitalizations, the prevalence of comorbidities, and in-hospital outcomes in young adults a decade apart. It highlights the rise in AMI hospitalizations, lack of decrease in mortality, sex-based and racial disparities, the surge in post-MI complications, and the decline in reperfusion interventions in young AMI patients over a decade.

Purpose

Coronary heart disease prevalence is challenging to ascertain in younger adults because of limited data and frequent silent clinical presentations. AMI and its complications can cause considerable morbidity, psychological trauma, and socioeconomic burden in the young.

Methods

We identified hospitalizations for AMI in young adults in 2007 and 2017 using the weighted data from the National Inpatient Sample (NIS), which covers 20% of stratified data of all non-federal community hospitals in the US. We compared the following data between the two cohorts: admission rates, sociodemographic features, in-hospital morbidity, complications, mortality, rate of coronary interventions, and healthcare utilization between the two cohorts. We used Pearson’s Chi-square test and Mann-Whitney U test to compare categorical and continuous variables, respectively. We also applied multivariable regression analyses to assess and compare the risk of cardiovascular complications and in-hospital mortality while controlling for confounders, including age, sex, race, median household income quartile, primary insurance enrolment, and pre-existing comorbidities.

Results

AMI’s incidence was higher in males in both the cohorts, although with a decline (71.1% vs 66.1%), whereas it rose from 28.9% to 33.9% in females. Hypertension (47.8% vs 60.7%), smoking (49.7% vs 55.8%), obesity (14.8% vs 26.8%), and diabetes mellitus (22.0% vs 25.6%) increased in the 2017 cohort (Table 1). We found no significant difference in all-cause mortality (aOR = 1.01 (0.93-1.10), p=0.749). Post-AMI complications, cardiogenic shock (aOR = 1.16 (1.06-1.27), p=0.001), and fatal arrhythmias increased. Reperfusion interventions decreased in the 2017 cohort (PCI; aOR=0.95 (0.91-0.98), p&lt;0.001; CABG; aOR=0.66 (0.61-0.71), p&lt;0.001) (Table 2).

Conclusion

Our study highlights the rise in AMI hospitalizations, plateauing of mortality, gender disparity, the surge in post-MI complications, and a reassuring decline in the requirement of reperfusion interventions in young AMI patients over a decade.

Surfactant induced microwave disintegration for enhanced biohydrogen production from macroalgae biomass: Thermodynamics and energetics

This research work aimed about the enhanced bio-hydrogen production from marine macro algal biomass (Ulva reticulate) through surfactant induced microwave disintegration (SIMD). Microwave disintegration (MD) was performed by varying the power from 90 to 630 W and time from 0 to 40 min. The maximum chemical oxygen demand (COD) solubilisation of 27.9% was achieved for MD at the optimal power (40%). A surfactant, ammonium dodecyl sulphate (ADS) is introduced in optimal power of MD which enhanced the solubilisation to 34.2% at 0.0035 g ADS/g TS dosage. The combined SIMD pretreatment significantly reduce the treatment time and increases the COD solubilisation when compared to MD. Maximum hydrogen yield of 54.9 mL H₂ /g COD was observed for SIMD than other samples. In energy analysis, it was identified that SIMD was energy efficient process compared to others since SIMD achieved energy ratio of 1.04 which is higher than MD (0.38).

Enhancement of the structure, solar cells and vibrational studies of undoped CuCr2O4 and La-doped CuCr2O4 semiconductor compounds

In the present paper, we report the successful synthesis of spinel-type of CuCr₂O₄ and La doped CuCr₂O₄ semiconductor nanoparticles by a microwave method. Starting with the precursor complex, this technique includes the creation of homogenous solid intermediates, which reduces atomic diffusion pathways during the microwave process. CuCr₂O₄ and La doped CuCr₂O₄ were characterized by the following analytical methods for instance X-ray diffraction (XRD), transmission electron microscopy (TEM), Ultraviolet–visible (UV–Vis) spectroscopy and Fourier transform infrared spectroscopy (FTIR). The results demonstrated that modifying the precursor had a significant impact on the size, solar cell size, as well as reaction period of synthesizing CuCr₂O₄ and La doped CuCr₂O₄. The impacts of precursors on the morphological and structural characteristics of CuCr₂O₄ and La doped CuCr₂O₄ were examined for the first time in this publication.

Recent biotechnological developments in reshaping the microalgal genome: A signal for green recovery in biorefinery practices

The use of renewable energy sources as a substitute for nonrenewable fossil fuels is urgently required. Algae biorefinery platform provides an excellent alternate to overcome future energy problems. However, to let this viable biomass be competent with existing feedstocks, it is necessary to exploit genetic manipulation and improvement in upstream and downstream platforms for optimal bio-product recovery. Furthermore, the techno-economic strategies further maximize metabolites production for biofuel, biohydrogen, and other industrial applications. The experimental methodologies in algal photobioreactor promote high biomass production, enriched in lipid and starch content in limited environmental conditions. This review presents an optimization framework combining genetic manipulation methods to simulate microalgal growth dynamics, understand the complexity of algal biorefinery to scale up, and identify green strategies for techno-economic feasibility of algae for biomass conversion. Overall, the algal biorefinery opens up new possibilities for the valorization of algae biomass and the synthesis of various novel products.