Tuning the biological activity profile of antibacterial polymers via subunit substitution pattern

Surface Modified with a Host Defense Peptide-Mimicking β-Peptide Polymer Kills Bacteria on Contact with High Efficacy

Methicillin-resistant Staphylococcus aureus (MRSA) has been one of the major nosocomial pathogens to cause frequent and serious infections that are associated with various biomedical surfaces. This study demonstrated that surface modified with host defense peptide-mimicking β-peptide polymer, has surprisingly high bactericidal activities against Escherichia coli ( E. coli) and MRSA. As surface-tethered β-peptide polymers cannot move freely to adopt the collaborative interactions with bacterial membrane and are too short to penetrate the cell envelop, we proposed a mode of action by diffusing away the cell membrane-stabilizing divalent ions, Ca²⁺ and Mg²⁺. This hypothesis was supported by our study that Ca²⁺ and Mg²⁺ supplementation in the assay medium causes up to 80% loss of bacterial killing efficacy and that the addition of divalent ion chelating ethylenediaminetetraacetic acid into the above assay medium leads to significant recovery of the bacterial killing efficacy. In addition to its potent bacterial killing efficacy, the surface-tethered β-peptide polymer also demonstrated excellent biocompatibility by displaying no hemolysis and supporting mammalian cell adhesion and growth. In conclusion, this study demonstrated the potential of β-peptide polymer-modified surface in addressing nosocomial infections that are associated with various surfaces in biomedical applications.

Chemo-Enzymatic Synthesis of Poly(4-piperidine lactone- b-ω-pentadecalactone) Block Copolymers as Biomaterials with Antibacterial Properties

With increasing troubles in bacterial contamination and antibiotic-resistance, new materials possessing both biocompatibility and antimicrobial efficacy are supposed to be developed for future biomedical application. Herein, we demonstrated a chemo-enzymatic ring opening polymerization (ROP) approach for block copolyester, that is, poly(4-benzyl formate piperidine lactone- b-ω-pentadecalactone) (PNPIL- b-PPDL), in a one-pot two-step process. Afterward, cationic poly(4-piperidine lactone- b-ω-pentadecalactone) (PPIL- b-PPDL) with pendent secondary amino groups was obtained via acidic hydrolysis of PNPIL- b-PPDL. The resulting cationic block copolyester exhibited high antibacterial activity against Gram negative E. coli and Gram positive S. aureus, while showed low toxicity toward NIH-3T3 cells. Moreover, the antibacterial property, cytotoxicity and degradation behavior could be tuned simply by variation of PPIL content. Therefore, we anticipate that such cationic block copolymers could potentially be applied as biomaterials for medicine or implants.

A Nanocomposite Hydrogel with Potent and Broad-Spectrum Antibacterial Activity

Local bacterial infection is a challenging task and still remains a serious threat to human health in clinics. Systemic administration of antibiotics has only short-term antibacterial activity and usually causes adverse effects and bacterial resistance. A bioadhesive hydrogel with broad-spectrum and on-demand antibiotic activity is highly desirable. Here, we designed a pH-responsive nanocomposite hydrogel via a Schiff base linkage between oxidized polysaccharides and cationic dendrimers encapsulated with silver nanoparticles. The antibacterial components, both the cationic dendrimers and silver species, could be released in response to the acidity generated by growing bacteria. The released cationic polymer and silver exhibited a synergistic effect in antibacterial activity, and thus, the nanocomposite hydrogel showed potent antibacterial activity against both Gram-negative ( Escherichia coli and Pseudomonas aeruginosa) and Gram-positive bacteria ( Staphylococcus epidermidis and Staphylococcus aureus). The gel showed superior in vivo antibacterial efficacy against S. aureus infection compared with a commercial silver hydrogel at the same silver concentration. In addition, no obvious hemolytic toxicity, cytotoxicity, and tissue and biochemical toxicity were observed for the antibacterial hydrogel after incubation with cells or implantation. This study provides a facile and promising strategy to develop smart hydrogels to treat local bacterial infections.

Hydrophobic interactions modulate antimicrobial peptoid selectivity towards anionic lipid membranes

Hydrophobic interactions govern specificity for natural antimicrobial peptides. No such relationship has been established for synthetic peptoids that mimic antimicrobial peptides. Peptoid macrocycles synthesized with five different aromatic groups are investigated by minimum inhibitory and hemolytic concentration assays, epifluorescence microscopy, atomic force microscopy, and X-ray reflectivity. Peptoid hydrophobicity is determined using high performance liquid chromatography. Disruption of bacterial but not eukaryotic lipid membranes is demonstrated on the solid supported lipid bilayers and Langmuir monolayers. X-ray reflectivity studies demonstrate that intercalation of peptoids with zwitterionic or negatively charged lipid membranes is found to be regulated by hydrophobicity. Critical levels of peptoid selectivity are demonstrated and found to be modulated by their hydrophobic groups. It is suggested that peptoids may follow different optimization schemes as compared to their natural analogues.

Bactericidal and Hemocompatible Coating via the Mixed-Charged Copolymer

Cationic antibacterial coating based on quaternary ammonium compounds, with an efficient and broad spectrum bactericidal property, has been widely used in various fields. However, the high density of positive charges tends to induce weak hemocompatibility, which hinders the application of the cationic antibacterial coating in blood-contacting devices and implants. It has been reported that a negatively charged surface can reduce blood coagulation, showing improved hemocompatibility. Here, we describe a strategy to combine the cationic and anionic groups by using mixed-charged copolymers. The copolymers of poly (quaternized vinyl pyridine- co- n-butyl methacrylate- co-methacrylate acid) [P(QVP- co- nBMA- co-MAA)] were synthesized through free radical copolymerization. The cationic group of QVP, the anionic group of MAA, and the hydrophobic group of nBMA were designed to provide bactericidal capability, hemocompatibility, and coating stability, respectively. Our findings show that the hydrophilicity of the copolymer coating increased, and its zeta potential decreased from positive charge to negative charge with the increase of the anionic/cationic ratio. Meanwhile, the bactericidal property of the copolymer coating was kept around a similar level compared with the pure quaternary ammonium copolymer coating. Furthermore, the coagulation time, platelet adhesion, and hemolysis tests revealed that the hemocompatibility of the copolymer coating improved with the addition of the anionic group. The mixed-charged copolymer combined both bactericidal property and hemocompatibility and has a promising potential in blood-contacting antibacterial devices and implants.

Synthesis, Self-Assembly, and Biomedical Applications of Antimicrobial Peptide-Polymer Conjugates

Antimicrobial peptides (AMPs) have been attracting much attention due to their excellent antimicrobial efficiency and low rate in driving antimicrobial resistance (AMR), which has been increasing globally to alarming levels. Conjugation of AMPs into functional polymers not only preserves excellent antimicrobial activities but reduces the toxicity and offers more functionalities, which brings new insight toward developing multifunctional biomedical materials such as hydrogels, polymer vesicles, polymer micelles, and so forth. These nanomaterials have been exhibiting excellent antimicrobial activity against a broad spectrum of bacteria including multidrug-resistant (MDR) ones, high selectivity, and low cytotoxicity, suggesting promising potentials in wound dressing, implant coating, antibiofilm, tissue engineering, and so forth. This Perspective seeks to highlight the state-of-the-art strategy for the synthesis, self-assembly, and biomedical applications of AMP-polymer conjugates and explore the promising directions for future research ranging from synthetic strategies, multistage and stimuli-responsive antibacterial activities, antifungi applications, and potentials in elimination of inflammation during medical treatment. It also will provide perspectives on how to stem the remaining challenges and unresolved problems in combating bacteria, including MDR ones.

Selectively targeting bacteria by tuning the molecular design of membrane-active peptidomimetic amphiphiles

Here we report the design of membrane-active peptidomimetic molecules with a tunable arrangement of hydrophobic and polar groups.

Sequence Control as a Powerful Tool for Improving the Selectivity of Antimicrobial Polymers

Antimicrobial polymers appear as a promising alternative to tackle the current development of bacterial resistance against conventional antibiotics as they rely on bacterial membrane disruption. This study investigates the effect of segmentation of hydrophobic and cationic functionalities on antimicrobial polymers over their selectivity between bacteria and mammalian cells. Using RAFT technology, statistical, diblock, and highly segmented multiblock copolymers were synthesized in a controlled manner. Polymers were analyzed by HPLC, and the segmentation was found to have a significant influence on their overall hydrophobicity. In addition, the amount of incorporated cationic comonomer was varied to yield a small library of bioactive macromolecules. The antimicrobial properties of these compounds were probed against pathogenic bacteria (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Staphylococcus epidermidis), and their biocompatibility was tested using hemolysis and erythrocyte aggregation assays, as well as mammalian cell viability assays. In all cases, diblock and multiblock copolymers were found to outperform statistical copolymers, and for polymers with a low content of cationic comonomer, the multiblock showed a tremendously increased selectivity for P. aeruginosa and S. epidermidis compared to its statistical and diblock analogue. This work highlights the remarkable effect of segmentation on both the physical properties of the materials as well as their interaction with biological systems. Due to the outstanding selectivity of multiblock copolymers toward certain bacteria strains, the presented materials are a promising platform for the treatment of infections and a valuable tool to combat antimicrobial resistance.

Surface-Adaptive Gold Nanoparticles with Effective Adherence and Enhanced Photothermal Ablation of Methicillin-Resistant Staphylococcus aureus Biofilm

Biofilms that contribute to the persistent bacterial infections pose serious threats to global public health, mainly due to their resistance to antibiotics penetration and escaping innate immune attacks by phagocytes. Here, we report a kind of surface-adaptive gold nanoparticles (AuNPs) exhibiting (1) a self-adaptive target to the acidic microenvironment of biofilm, (2) an enhanced photothermal ablation of methicillin-resistant Staphylococcus aureus (MRSA) biofilm under near-infrared (NIR) light irradiation, and (3) no damage to the healthy tissues around the biofilm. Originally, AuNPs were readily prepared by surface modification with pH-responsive mixed charged zwitterionic self-assembled monolayers consisting of weak electrolytic 11-mercaptoundecanoic acid (HS-C₁₀-COOH) and strong electrolytic (10-mercaptodecyl)trimethylammonium bromide (HS-C₁₀-N₄). The mixed charged zwitterion-modified AuNPs showed fast pH-responsive transition from negative charge to positive charge, which enabled the AuNPs to disperse well in healthy tissues (pH ∼7.4), while quickly presenting strong adherence to negatively charged bacteria surfaces in MRSA biofilm (pH ∼5.5). Simultaneous AuNP aggregation within the MRSA biofilm enhanced the photothermal ablation of MRSA biofilm under NIR light irradiation. The surrounding healthy tissues showed no damage because the dispersed AuNPs had no photothermal effect under NIR light. In view of the above advantages as well as the straightforward preparation, AuNPs developed in this work may find potential applications as a useful antibacterial agent in the areas of healthcare.

New Modalities for Challenging Targets in Drug Discovery

Our ever-increasing understanding of biological systems is providing a range of exciting novel biological targets, whose modulation may enable novel therapeutic options for many diseases. These targets include protein-protein and protein-nucleic acid interactions, which are, however, often refractory to classical small-molecule approaches. Other types of molecules, or modalities, are therefore required to address these targets, which has led several academic research groups and pharmaceutical companies to increasingly use the concept of so-called "new modalities". This Review defines for the first time the scope of this term, which includes novel peptidic scaffolds, oligonucleotides, hybrids, molecular conjugates, as well as new uses of classical small molecules. We provide the most representative examples of these modalities to target large binding surface areas such as those found in protein-protein interactions and for biological processes at the center of cell regulation.

Inhibition of Ice Recrystallization by Nylon-3 Polymers

Nontoxic cryoprotectants are needed for storage of tissues and food preservation. Frozen tissue is particularly susceptible to damage caused by formation of large ice crystals during the thawing process. The current practice of using 5 wt % DMSO for cryopreservation does not produce 100% cell viability post-thaw, at least in part because of DMSO toxicity that is manifested during the freezing and thawing stages of the process. Recently, poly(vinyl alcohol) (PVA) has shown promise in inhibiting ice recrystallization, an activity that is critical for cryoprotection. Inspired by this discovery, we have evaluated nylon-3 polymers for ice recrystallization inhibition activity and for toxicity toward mammalian cells. A survey of homo- and heteropolymers, with side chains bearing variable functionality, has identified new nylon-3 materials that display excellent ice recrystallization inhibition activity and low toxicity.

Sequence-Defined Backbone Modifications Regulate Antibacterial Activity of OligoTEAs

In response to the urgent need for new antibiotic development strategies, antimicrobial peptides (AMPs) and other synthetic polymers are being actively investigated as promising alternatives to traditional antibiotics. Although most AMPs display lytic activity against several types of bacteria, they have poor toxicology profiles and are susceptible to proteolysis in vivo. While many synthetic variants have been created to mimic AMPs by tuning the hydrophobic to cationic ratio of the side-chain groups, few have decoupled the effects of charge from hydrophobicity in discrete systems, and none have investigated the effect of backbone hydrophobicity. We recently developed a rapid and efficient approach for the assembly of synthetic sequence-defined oligothioetheramides (oligoTEAs) that are resistant to protease activity. Our oligoTEA assembly scheme allows direct access to the oligomer backbone, which enables precise tuning of oligoTEA hydrophobicity while keeping charge constant. In this study, we synthesized a new class of antibacterial oligoTEAs (AOTs) with precise control over backbone hydrophobicity and composition. Our studies suggest that AOTs lyse cells via membrane permeabilization and that hydrophobicity and macromolecular conformation are key properties that regulate AOT activity. Some of our AOTs show highly promising antibacterial activity (MIC ∼ 0.5-5 μM) against clinically relevant pathogens in the presence of serum, with little to no toxicity against RBCs and HEK293 cells. Taken together, our data identify design parameters and criteria that may be useful for assembling the next generation of potent and selective AOTs.

Rationally designed dual functional block copolymers for bottlebrush-like coatings: In vitro and in vivo antimicrobial, antibiofilm, and antifouling properties

Numerous antimicrobial coatings have been developed for biomedical devices/implants, but few can simultaneously fulfill the requirements for antimicrobial and antifouling ability and biocompatibility. In this study, to develop an antimicrobial and antibiofilm surface coating, diblock amphiphilic molecules with antimicrobial and antifouling segments in a single chain were rationally designed and synthesized. Cationic antimicrobial polypeptides (AMP) were first synthesized by N-carboxyanhydride ring-opening polymerization (NCA-ROP). Heterofunctionalized poly(ethylene glycol) with different lengths (methacrylate-PEG_n-tosyl, n=10/45/90) was synthesized and site-specifically conjugated with polypeptides to form diblock amphiphiles. Along with increased PEG chain length, hemolytic activity was considerably improved, and broad-spectrum antimicrobial activity is retained. Three MA-PEG_n-b-AMP copolymers were further grafted onto the surface of silicone rubber (a commonly used catheter material) via plasma/UV-induced surface polymerizations to form a bottlebrush-like coating with excellent antimicrobial activity against several pathogenic bacteria (Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus), and effectively prevent biofilm formation. This bottlebrush coating also greatly reduced protein adsorption and platelet adhesion, indicating its excellent antifouling ability. An in vitro cytotoxicity study also demonstrated that this coating is biocompatible with mammalian cells. After subcutaneous implantation of the materials in rats, we demonstrated that the g-PEG₄₅-b-AMP bottlebrush coating exhibits significant anti-infective activity in vivo. Thus, this facilely synthesized PEGylated AMP bottlebrush coating is a feasible method to prevent biomedical devices-associated infections.

STATEMENT OF SIGNIFICANCE

Current antimicrobial coatings are often associated with concerns such as antibiotic resistance, environmental pollution, short-time antimicrobial activity, biofouling, poor blood compatibility and cytotoxicity, etc. To overcome these drawbacks, a robust PEGylated cationic amphiphilic peptides-based bottlebrush-like surface coating is demonstrated here, which fulfil the requirements of antimicrobial and antifouling as well as biocompatibility in the meantime. Briefly, the rational designed g-PEG_n-b-AMP block copolymers (n=10/45/90) were synthesized and grafted on silicone surface. This bottlebrush-like coating efficiently kill the contacted bacteria and prevent the biofilm formation, greatly reduced protein and platelet adhesion. It also exhibits excellent blood compatibility and low cytotoxicity in vitro. In particular, g-PEG₄₅-b-AMP coating exhibits significant anti-infection effect in vivo. This coating offering an effective strategy for combating biomedical devices-associated infections.

Methacrylate-ended polypeptides and polypeptoids for antimicrobial and antifouling coatings

Methacrylate-terminated polypept(o)ides were directly synthesized via NCA-ROP, and then surface-grafted to form a polymer brush coating with infection-resistant efficacy.

Cationic peptidopolysaccharides synthesized by ‘click’ chemistry with enhanced broad-spectrum antimicrobial activities

A series of broad-spectrum antimicrobial cationic peptidopolysaccharides have been synthesized using a facile thiol–ene ‘click’ chemistry.

A Biodegradable Polycationic Paint that Kills Bacteria in Vitro and in Vivo

Bacterial colonization and subsequent formation of biofilms onto surfaces of medical devices and implants is a major source of nosocomial infections. Most antibacterial coatings to combat infections are either metal-based or nondegradable-polymer-based and hence limited by their nondegradability and unpredictable toxicity. Moreover, to combat infections effectively, the coatings are required to display simultaneous antibacterial and antibiofilm activity. Herein we report biocompatible and biodegradable coatings based on organo-soluble quaternary chitin polymers which were immobilized noncovalently onto surfaces as bactericidal paint. The polycationic paint was found to be active against both drug-sensitive and -resistant bacteria such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus faecium (VRE), and β-lactam-resistant Klebsiella pneumoniae. The cationic polymers were shown to interact with the negatively charged bacterial cell membrane and disrupt the membrane integrity, thereby causing leakage of intracellular constituents and cell death upon contact. Importantly, surfaces coated with the polymers inhibited formation of biofilms against both Gram-positive S. aureus and Gram-negative E. coli, two of the most clinically important bacteria that form biofilms. Surfaces coated with the polymers displayed negligible toxicity against human erythrocytes and embryo kidney cells. Notably, the polymers were shown to be susceptible toward lysozyme. Furthermore, subcutaneous implantation of polymer discs in rats led to 15-20% degradation in 4 weeks thereby displaying their biodegradability. In a murine model of subcutaneous infection, polymer-coated medical-grade catheter reduced MRSA burden by 3.7 log compared to that of noncoated catheter. Furthermore, no biofilm development was observed on the coated catheters under in vivo conditions. The polycationic materials thus developed herein represent a novel class of safe and effective coating agents for the prevention of device-associated infections.

Recent Advances in Antimicrobial Polymers: A Mini-Review

Human safety and well-being is threatened by microbes causing numerous infectious diseases resulting in a large number of deaths every year. Despite substantial progress in antimicrobial drugs, many infectious diseases remain difficult to treat. Antimicrobial polymers offer a promising antimicrobial strategy for fighting pathogens and have received considerable attention in both academic and industrial research. This mini-review presents the advances made in antimicrobial polymers since 2013. Antimicrobial mechanisms exhibiting either passive or active action and polymer material types containing bound or leaching antimicrobials are introduced. This article also addresses the applications of these antimicrobial polymers in the medical, food, and textile industries.

Small Antimicrobial Agents Based on Acylated Reduced Amide Scaffold

Prevalence of drug-resistant bacteria has emerged to be one of the greatest threats in the 21st century. Herein, we report the development of a series of small molecular antibacterial agents that are based on the acylated reduced amide scaffold. These molecules display good potency against a panel of multidrug-resistant Gram-positive and Gram-negative bacterial strains. Meanwhile, they also effectively inhibit the biofilm formation. Mechanistic studies suggest that these compounds kill bacteria by compromising bacterial membranes, a mechanism analogous to that of host-defense peptides (HDPs). The mechanism is further supported by the fact that the lead compounds do not induce resistance in MRSA bacteria even after 14 passages. Lastly, we also demonstrate that these molecules have therapeutic potential by preventing inflammation caused by MRSA induced pneumonia in a rat model. This class of compounds could lead to an appealing class of antibiotic agents combating drug-resistant bacterial strains.

Single-Cell, Time-Resolved Antimicrobial Effects of a Highly Cationic, Random Nylon-3 Copolymer on Live Escherichia coli

Synthetic random copolymers based on the nylon-3 (β-peptide) backbone show promise as inexpensive antimicrobial agents resistant to proteolysis. We present a time-resolved observational study of the attack of a particular copolymer MM63:CHx37 on single, live Escherichia coli cells. The composition and chain length of MM63:CHx37 (63% cationic subunits, 37% hydrophobic subunits, 35-subunit average length) were optimized to enhance antibacterial activity while minimizing lysis of human red blood cells. For E. coli cells that export GFP to the periplasm, we obtain alternating phase-contrast and green fluorescence images with a time resolution of 12 s over 60 min following initiation of copolymer flow. Within seconds, cells shrink and exhibit the same plasmolysis spaces that occur following abrupt external osmotic upshift. The osmoprotection machinery attempts to replenish cytoplasmic water, but recovery is interrupted by permeabilization of the cytoplasmic membrane (CM) to GFP. Evidently, the highly cationic copolymer and its counterions rapidly translocate across the outer membrane without permeabilizing it to GFP. The CM permeabilization event is spatially localized. Cells whose CM has been permeabilized never recover growth. The minimum inhibitory concentration (MIC) for cells lacking the osmolyte importer ProP is 4-fold smaller than for normal cells, suggesting that osmoprotection is an important survival strategy. In addition, at the time of CM permeabilization, we observe evidence of oxidative stress. The MIC under anaerobic conditions is at least 8-fold larger than under aerobic conditions, further implicating oxidative damage as an important bacteriostatic effect. Once the copolymer reaches the periplasm, multiple growth-halting mechanisms proceed in parallel.

Synthesis of antimicrobial block copolymers bearing immobilized bacteriostatic groups

Antimicrobial block copolymers bearing covalently bonded quaternized ammonium groups were synthesized through atom transfer radical polymerization (ATRP). Moreover, a new class of antimicrobial block copolymers were designed combining two types of biocide incorporation into one system (both contact-based and release-based mechanisms).

Antimicrobial activities of phosphonium containing polynorbornenes

In this study, amphiphilic polyoxanorbornene with different alkyl and aromatic phosphonium side chains was synthesized and investigated their biocidal properties.

Cyclization and unsaturation rather than isomerisation of side chains govern the selective antibacterial activity of cationic-amphiphilic polymers

The influence of cyclization and unsaturation on the hydrophobic side chains of cationic-amphiphilic polymers towards antibacterial activity and mammalian cell toxicity is reported.

Self-assembled vesicles of urea-tethered foldamers as hydrophobic drug carriers

Nonamphiphilic α,β-hybrid foldamers form hollow vesicular architectures which can take up and release the anticancer hydrophobic drug curcumin.

Random peptide mixtures inhibit and eradicate methicillin-resistant Staphylococcus aureus biofilms

Sequence-random hydrophobic-cationic peptides are capable of controlling and managing methicillin-resistantStaphylococcus aureusbiofilms and might be used as lead biofilm inhibitor candidates for further studies.

Isosteric substitution in cationic-amphiphilic polymers reveals an important role for hydrogen bonding in bacterial membrane interactions

The important role of hydrogen bonding in the interactions of cationic-amphiphilic polymers with bacterial membranes has been reported.

Biomimetic antibacterial polymers, the functional mimics of antimicrobial peptides (AMPs), targeting the bacterial cell membrane have been developed to combat the problem of antibiotic resistance. Amphiphilicity, a balance of cationic charge and hydrophobicity, in these polymers has been shown to be pivotal for their selective interactions with anionic lipid membranes of bacteria instead of zwitterionic mammalian (human erythrocyte) membranes. However, it is unclear if and to what extent hydrogen bonding in amphiphilic antibacterial polymers contributes to this membrane binding specificity. To address this, we employ isosteric substitution of ester with amide moieties that differ in their potency for hydrogen bonding in the side chains of N-alkyl maleimide based amphiphilic polymers. Our studies reveal that amide polymer (AC3P) is a potent antibacterial agent with high membrane-disrupting properties compared to its ester counterpart (EC3P). To understand these differences we performed bio-physical experiments and molecular dynamics (MD) simulations which showed strong interactions of AC3P including hydrogen bonding with lipid head groups of bacterial model lipid bilayers, that are absent in EC3P, make them selective for bacterial membranes. Mechanistic investigations of these polymers in bacteria revealed specific membrane disruptive activity leading to the delocalization of cell division related proteins. This unprecedented and unique concept provides an understanding of bacterial membrane interactions highlighting the role of hydrogen bonding. Thus, these findings will have significant implications in efficient design of potent membrane-active agents.

Copolymers of acrylonitrile with quaternizable thiazole and triazole side-chain methacrylates as potent antimicrobial and hemocompatible systems

A series of six copolymeric families, P(AN-co-MTAs) with various molar fractions of acrylonitrile (fAN) and methacrylates (fMTA) based on 1,3-thiazole and 1,2,3-triazole pendant groups with several spacers of different length and nature (alkyl or succinic), have been synthesized by conventional radical polymerization. The molar fraction of acrylonitrile in the copolymers (FAN) was determined by CHNS elemental analysis. The copolymers were also characterized by ATR-FTIR and molecular weights were determined by size exclusion chromatography (SEC). Due to the nucleophilic nature of the azole heterocycles the copolymers have been easily modified by N-alkylation reaction with butyl iodide leading to polyelectrolytes of diverse amphiphilic balance, P(AN-co-MTAs-BuI). The degree of quaternization (DQ) was quantitative in all instances and was determined by (1)H NMR spectroscopy. Dynamic light scattering (DLS) measurements were performed in order to determine the particle size and the charge density of the systems. The antimicrobial activity of the copolymers was studied in terms of minimal inhibitory concentration (MIC) against the Gram-positive bacteria Staphylococcus aureus, the Gram-negative Pseudomonas aeruginosa and the yeast Candida parapsilosis, as well as the cytotoxic activity toward human red blood cells (RBCs). These types of amphiphilic copolycations presented high selectivity (>300) maintaining moderate to good antimicrobial activity (MIC=4-64 μg/mL) and being non-hemolytic even at high molar fractions of AN in the copolymers compared to PMTAs-BuI homopolymers. Moreover, two examples of acrylonitrile-enriched copolymers (FAN=0.6) presented an excellent time-killing efficiency against microorganisms with 99.9% of killing ranging from 5 to 30 min. Besides, important changes in the morphology of the cell envelop of the microorganisms after treatment with P(AN-co-MTAs) were observed by Field Emission Scanning Electron Microscopy (FE-SEM) compared to untreated samples. These results indicate that these quaternized copolymers (QUATs) behave like the corresponding PMTAs-BuI homopolymers, being microbiostatic and also highly effective microbiocidal agents.

Polymeric drugs: Advances in the development of pharmacologically active polymers

Synthetic polymers play a critical role in pharmaceutical discovery and development. Current research and applications of pharmaceutical polymers are mainly focused on their functions as excipients and inert carriers of other pharmacologically active agents. This review article surveys recent advances in alternative pharmaceutical use of polymers as pharmacologically active agents known as polymeric drugs. Emphasis is placed on the benefits of polymeric drugs that are associated with their macromolecular character and their ability to explore biologically relevant multivalency processes. We discuss the main therapeutic uses of polymeric drugs as sequestrants, antimicrobials, antivirals, and anticancer and anti-inflammatory agents.

Correlating antimicrobial activity and model membrane leakage induced by nylon-3 polymers and detergents

Most antimicrobial peptides act upon target microorganisms by permeabilizing their membranes. The mode of action is often assessed by vesicle leakage experiments that use model membranes, with the assumption that biological activity correlates with the permeabilization of the lipid bilayer. The current work aims to extend the interpretation of vesicle leakage results and examine the correlation between vesicle leakage and antimicrobial activity. To this end, we used a lifetime-based leakage assay with calcein-loaded vesicles to study the membrane permeabilizing properties of a novel antifungal polymer poly-NM, two of its analogs, and a series of detergents. In conjunction, the biological activities of these compounds against Candida albicans were assessed and correlated with data from vesicle leakage. Poly-NM induces all-or-none leakage in polar yeast lipid vesicles at the polymer's MIC, 3 μg mL(-1). At this and higher concentrations, complete leakage after an initial lag time was observed. Concerted activity tests imply that this polymer acts independently of the detergent octyl glucoside (OG) for both vesicle leakage and activity against C. albicans spheroplasts. In addition, poly-NM was found to have negligible activity against zwitterionic vesicles and red blood cells. Our results provide a consistent, detailed picture of the mode of action of poly-NM: this polymer induces membrane leakage by electrostatic lipid clustering. In contrast, poly-MM:CO, a nylon-3 polymer comprised of both cationic and hydrophobic segments, seems to act by a different mechanism that involves membrane asymmetry stress. Vesicle leakage for this polymer is transient (limited to <100%) and graded, non-specific among zwitterionic and polar yeast lipid vesicles, additive with detergent action, and correlates poorly with biological activity. Based on these results, we conclude that comprehensive leakage experiments can provide a detailed description of the mode of action of membrane permeabilizing compounds. Without this thorough approach, it would have been logical to assume that the two nylon-3 polymers we examined act via similar mechanisms; it is surprising that their mechanisms are so distinct. Some, but not all mechanisms of vesicle permeabilization allow for antimicrobial activity.

Membrane-active macromolecules resensitize NDM-1 gram-negative clinical isolates to tetracycline antibiotics

Gram-negative 'superbugs' such as New Delhi metallo-beta-lactamase-1 (blaNDM-1) producing pathogens have become world's major public health threats. Development of molecular strategies that can rehabilitate the 'old antibiotics' and halt the antibiotic resistance is a promising approach to target them. We report membrane-active macromolecules (MAMs) that restore the antibacterial efficacy (enhancement by >80-1250 fold) of tetracycline antibiotics towards blaNDM-1 Klebsiella pneumonia and blaNDM-1 Escherichia coli clinical isolates. Organismic studies showed that bacteria had an increased and faster uptake of tetracycline in the presence of MAMs which is attributed to the mechanism of re-sensitization. Moreover, bacteria did not develop resistance to MAMs and MAMs stalled the development of bacterial resistance to tetracycline. MAMs displayed membrane-active properties such as dissipation of membrane potential and membrane-permeabilization that enabled higher uptake of tetracycline in bacteria. In-vivo toxicity studies displayed good safety profiles and preliminary in-vivo antibacterial efficacy studies showed that mice treated with MAMs in combination with antibiotics had significantly decreased bacterial burden compared to the untreated mice. This report of re-instating the efficacy of the antibiotics towards blaNDM-1 pathogens using membrane-active molecules advocates their potential for synergistic co-delivery of antibiotics to combat Gram-negative superbugs.

Nylon-3 polymers active against drug-resistant Candida albicans biofilms

Candida albicans is the most common fungal pathogen in humans, and most diseases produced by C. albicans are associated with biofilms. We previously developed nylon-3 polymers with potent activity against planktonic C. albicans and excellent C. albicans versus mammalian cell selectivity. Here we show that these nylon-3 polymers have strong and selective activity against drug-resistant C. albicans in biofilms, as manifested by inhibition of biofilm formation and by killing of C. albicans in mature biofilms. The best nylon-3 polymer (poly-βNM) is superior to the antifungal drug fluconazole for all three strains examined. This polymer is slightly less effective than amphotericin B (AmpB) for two strains, but the polymer is superior against an AmpB-resistant strain.

Cell penetrating synthetic antimicrobial peptides (SAMPs) exhibiting potent and selective killing of mycobacterium by targeting its DNA

Naturally occurring antimicrobial peptides (AMPs) are powerful defence tools to tackle pathogenic microbes. However, limited natural production and high synthetic costs in addition to poor selectivity limit large-scale use of AMPs in clinical settings. Here, we present a series of synthetic AMPs (SAMPs) that exhibit highly selective and potent killing of Mycobacterium (minimum inhibitory concentration <20 μg mL(-1)) over E. coli or mammalian cells. These SAMPs are active against rapidly multiplying as well as growth saturated Mycobacterium cultures. These SAMPs are not membrane-lytic in nature, and are readily internalized by Mycobacterium and mammalian cells; whereas in E. coli, the lipopolysaccharide layer inhibits their cellular uptake, and hence, their antibacterial action. Upon internalization, these SAMPs interact with the unprotected genomic DNA of mycobacteria, and impede DNA-dependent processes, leading to bacterial cell death.

Structure-activity investigations on amphiphilic cationic copolymers of vinyl N,N-dimethylethylglycinate with vinyl alkanoate esters as highly effective antibacterial agents

Amphiphilic poly(vinyl esters) with structural control function as antibacterial agents.

Screening nylon-3 polymers, a new class of cationic amphiphiles, for siRNA delivery

Amphiphilic nucleic acid carriers have attracted strong interest. Three groups of nylon-3 copolymers (poly-β-peptides) possessing different cationic/hydrophobic content were evaluated as siRNA delivery agents in this study. Their ability to condense siRNA was determined in SYBR Gold assays. Their cytotoxicity was tested by MTT assays, their efficiency of delivering Alexa Fluor-488-labeled siRNA intracellularly in the presence and absence of uptake inhibitors was assessed by flow cytometry, and their transfection efficacies were studied by luciferase knockdown in a cell line stably expressing luciferase (H1299/Luc). Endosomal release was determined by confocal laser scanning microscopy and colocalization with lysotracker. All polymers efficiently condensed siRNA at nitrogen-to-phosphate (N/P) ratios of 5 or lower, as reflected in hydrodynamic diameters smaller than that at N/P 1. Although several formulations had negative zeta potentials at N/P 1, G2C and G2D polyplexes yielded >80% uptake in H1299/Luc cells, as determined by flow cytometry. Luciferase knockdown (20–65%) was observed after transfection with polyplexes made of the high molecular weight polymers that were the most hydrophobic. The ability of nylon-3 polymers to deliver siRNA intracellularly even at negative zeta potential implies that they mediate transport across cell membranes based on their amphiphilicity. The cellular uptake route was determined to strongly depend on the presence of cholesterol in the cell membrane. These polymers are, therefore, very promising for siRNA delivery at reduced surface charge and toxicity. Our study identified nylon-3 formulations at low N/P ratios for effective gene knockdown, indicating that nylon-3 polymers are a new, promising type of gene delivery agent.

Synthetic polymers active against Clostridium difficile vegetative cell growth and spore outgrowth

Nylon-3 polymers (poly-β-peptides) have been investigated as synthetic mimics of host-defense peptides in recent years. These polymers are attractive because they are much easier to synthesize than are the peptides themselves, and the polymers resist proteolysis. Here we describe in vitro analysis of selected nylon-3 copolymers against Clostridium difficile, an important nosocomial pathogen that causes highly infectious diarrheal disease. The best polymers match the human host-defense peptide LL-37 in blocking vegetative cell growth and inhibiting spore outgrowth. The polymers and LL-37 were effective against both the epidemic 027 ribotype and the 012 ribotype. In contrast, neither vancomycin nor nisin inhibited outgrowth for the 012 ribotype. The best polymer was less hemolytic than LL-37. Overall, these findings suggest that nylon-3 copolymers may be useful for combatting C. difficle.