UTSA-74: A MOF-74 Isomer with Two Accessible Binding Sites per Metal Center for Highly Selective Gas Separation

Chiral porous CN-bridged coordination polymer mimicking MOF-74 and showing magnetization photoswitching

A chiral porous cyanide-bridged framework {[Mn^II(L)]₂[W^IV(CN)₈]·10H₂O}_n (1; L = 2,6-bis[1-(2-(N-methylamino)ethylimino)ethyl]-pyridine) showing a strong structural similarity to MOF-74 has been prepared and characterised. The crystallised water molecules can be easily removed below 60 °C, leading to a distinct crystal colour change and the activation of its photomagnetic properties - constituting the so called photomagnetic sponge behaviour of this system. The complete dehydration of 1 proceeds through a single-crystal-to-single-crystal transformation and the resulting anhydrous framework {[Mn^II(L)]₂[W^IV(CN)₈]}_n (1anh) was studied using single-crystal X-ray diffraction.

Efficient C2H2/CO2 Separation in Ultramicroporous Metal-Organic Frameworks with Record C2H2 Storage Density

Physical separation of C₂H₂ from CO₂ on metal-organic frameworks (MOFs) has received substantial research interest due to the advantages of simplicity, security, and energy efficiency. However, that C₂H₂ and CO₂ exhibit very close physical properties makes their separation exceptionally challenging. Previous work appeared to mostly focused on introducing open metal sites that aims to enhance the C₂H₂ affinity at desired sites, whereas the reticular manipulation of organic components has rarely been investigated. In this work, by reticulating preselected amino and hydroxy functionalities into isostructural ultramicroporous chiral MOFs-Ni₂(l-asp)₂(bpy) (MOF-NH₂) and Ni₂(l-mal)₂(bpy) (MOF-OH)-we targeted efficient C₂H₂ uptake and C₂H₂/CO₂ separation, which outperforms most benchmark materials. Explicitly, MOF-OH adsorbs substantial amount of C₂H₂ with record storage density of 0.81 g mL^-1 at ambient conditions, which even exceeds the solid density of C₂H₂ at 189 K. In addition, MOF-OH gave IAST selectivity of 25 toward equimolar mixture of C₂H₂/CO₂, which is nearly twice higher than that of MOF-NH₂. Notably, the adsorption enthalpies for C₂H₂ at zero converge in both MOFs are remarkably low (17.5 kJ mol^-1 for MOF-OH and 16.7 kJ mol^-1 for MOF-NH₂), which to our knowledge are the lowest among efficient rigid C₂H₂ sorbents. The efficiencies of both MOFs for the separation of C₂H₂/CO₂ are validated by multicycle breakthrough experiments. DFT calculations provide molecular-level insight over the adsorption/separation mechanism. Moreover, MOF-OH can survive in boiling water for at least 1 week and can be easily scaled up to kilograms eco-friendly and economically, which is very crucial for potential industrial implementation.

Role of additives and solvents in the synthesis of chiral isoreticular MOF-74 topologies

Chiral induction is a simple and inexpensive approach to synthesise chiral metal–organic frameworks, even when using achiral building-blocks. The challenge lies in selecting the proper chiral inductor. This can only be achieved upon understanding the mechanism behind the chirality transfer from the chiral guest to the achiral MOF. In this work, the role of two types of chiral additives and different solvents was investigated in the crystallization of isoreticular MOF-74. We show that pyrrolidone-based solvents can interact with the framework walls and influence the thermal stability of the MOF. The role of the different chiral additives is related to the strength of their interaction with the MOF. Unlike cinchona alkaloids that have weak interactions with the framework, l- or d-trans-4-hydroxyproline (l- or d-Hyp) can strongly bind to the Zn²⁺ metal centres and cause the twisting of the organic linker. Moreover, l- and d-Hyp additives can affect the IRMOF-74 nucleation process depending on their concentration and handedness.

Strongly interacting chiral additives play a complex role during the crystallisation of chiral isoreticular MOF-74. They can coordinate to the open sites of the metal ions and induce strain on the framework, leading to a local twisting of the organic linker.

Achieving High Performance Metal-Organic Framework Materials through Pore Engineering

Achieving high performance functional materials has been a long-term goal for scientists and engineers that can significantly promote science and technology development and thus benefit our society and human beings. As well-known porous materials, metal-organic frameworks (MOFs) are crystalline open frameworks made up of molecular building blocks linked by strong coordination bonds, affording pore space for storing and trapping guest molecules. In terms of porosity, MOFs outperform traditional porous materials including zeolites and activated carbon, showing exceptional porosity with internal surface area up to thousands of square meters per gram of sample and with periodic pore sizes ranging from sub-nanometer to nanometers. Numerous MOFs have been synthesized with potential applications ranging from storing gaseous fuels to separating intractable industrial gas mixtures, sensing physical and chemical stimulus, and transmitting protons for conduction. Compared to traditional porous materials, MOFs are distinguished for their exceptional capability for pore adjustment and interior modification through pore engineering, which have made them a preeminent platform for exploring functional materials with high performance.Rational combinations of rigid building units of different geometry and multibranched organic linkers have provided MOFs with diverse pore structures, ranging from spherical to cylindrical, slit, and tubular ones isolating or interconnecting in different directions, which can be optimized for high-capacity gas storage. Based on the isoreticular principle and building blocks approach in MOF chemistry, the pore adjustment of porous materials can be performed with exquisite precision, making them suitable to address industrially important gas separation. The large pore cavities in MOFs are readily available for encapsulation of different functional guest species, resulting in novel MOF composite materials with various functions.In this Account, we summarize our recent research progress on pore engineering to achieve high-performance MOF materials. We have been able to tune and optimize pore structures, immobilize specific functional sites, and incorporate guest species into target MOF materials for hydrogen storage, methane storage, light-hydrocarbon purification, and proton conduction, especially for various industrially important gas separations including acetylene removal and ethylene and propylene purification. By engineering the porosity and pore chemistry that endows MOFs with multiple functionalities, our research endeavors have brought about the customization of high-performance MOF materials for corresponding application scenarios.

Metal-Organic Frameworks Featuring 18-Connected Nonanuclear Rare-Earth Oxygen Clusters and Cavities for Efficient C2H2/CO2 Separation

Two rare-earth (RE) metal-organic frameworks (MOFs) formulated as {(Me₂NH₂)₂[RE₉(μ₃-OH)₈(μ₂-OH)₃(DCPB)₆(H₂O)₃]}_n (RE = Y³⁺ and Tb³⁺; termed JXNU-10) built from a triangular 3,5-di(4'-carboxylphenyl)benzoic acid (DCPB^3-) ligand are presented. JXNU-10 features the rarely observed 18-connected nonanuclear [RE₉(μ₃-OH)₈(μ₂-OH)₃] clusters, one-dimensional-nanosized tubular channels, and trigonal-bipyramidal cavities. The presence of the high-nuclear RE-oxo clusters and the robust coordination bonds between the highly charged RE ions and the hard base of the carboxylate/hydroxyl oxygen atoms yielded the water-resistant JXNU-10 materials. JXNU-10 exhibits highly selective sorption of C₂H₂ over CO₂ and highly efficient separation of a C₂H₂ and CO₂ mixture. The carboxylate oxygen atoms and the rich π systems of the organic ligands on the pore walls are the desirable binding sites for a C₂H₂ molecule with acidic hydrogen atoms and an alkyne group, facilitating the excellent efficiency of JXNU-10 for C₂H₂/CO₂ separation demonstrated by breakthrough experiments.

Impact of Pore Size and Defects on the Selective Adsorption of Acetylene in Alkyne-Functionalized Nickel(II)-Pyrazolate-Based MOFs

C₂H₂/CO₂ separation is a highly challenging process as a consequence of their similar physicochemical properties. In this work we have explored, by static and dynamic gas sorption techniques and computational modelling, the suitability of a series of two isoreticular robust Ni(II)pyrazolate‐based MOFs, bearing alkyne moieties on the ligand backbones, for C₂H₂/CO₂ separation. The results are consistent with high adsorption capacity and selectivity of the essayed systems towards C₂H₂ molecules. Furthermore, a post‐synthetic treatment with KOH ethanolic solution gives rise to linker vacancy defects and incorporation of extraframework potassium ions. Creation of defects is responsible for increased adsorption capacity for both gases, however, strong interactions of the cluster basic sites and extraframework potassium cations with CO₂ molecules are responsible for a lowering of C₂H₂ over CO₂ selectivity.

Interpenetration symmetry control within ultramicroporous robust boron cluster hybrid MOFs for benchmark purification of acetylene from carbon dioxide

The separation of C2H2/CO2 is an important process in industry but challenged by the trade-off of capacity and selectivity owning to their similar physical properties and identical kinetic molecular size. Herein, we report the first example of symmetrically interpenetrated dodecaborate pillared MOF, ZNU-1, for benchmark selective separation of C2H2 from CO2 with a high C2H2 capacity of 76.3 cm3 g-1 and record C2H2/CO2 selectivity of 56.6 (298 K, 1 bar) among all the robust porous materials without open metal sites. Single crystal structure analysis and modelling study indicated that the interpenetration shifting from asymmetric to symmetric mode provided optimal pore chemistry with ideal synergistic "2+2" dihydrogen bonding sites for tight C2H2 trapping. The exceptional separation performance was further evidenced by simulated and experimental breakthroughs with excellent recyclability and high productivity (2.4 mol/kg) of 99.5% purity C2H2 during stepped desorption process.

Rapid mechanochemical synthesis of metal-organic frameworks using exogenous organic base

Metal-organic frameworks (MOFs) bearing coordinatively unsaturated metal centers, exemplified by the MOF-74 family of frameworks, are promising for applications ranging from gas separations and storage to Lewis acid catalysis. However, the scalable synthesis of MOF-74 analogues remains a significant challenge. Recently, mechanochemistry has emerged as a sustainable strategy for the preparation of MOFs in the solid state with minimal solvent waste. Mechanochemical methods typically rely on metal salts bearing basic anions to deprotonate the conjugate acid of the organic linker and a small amount of organic solvent or water to facilitate liquid assisted grinding. Here, we demonstrate that the liquid exogenous organic base Hünig's base (N,N-diisopropylethylamine) can fulfill both roles, enabling the mechanochemical synthesis of M2(dobdc) analogues (M = Mg, Mn, Co, Ni, Cu, Zn; dobdc4- = 2,5-dioxidobenzene-1,4-dicarboxylate) using metal nitrate salts in only 5 minutes at room temperature. Importantly, we demonstrate that this straightforward method can be generalized to prepare the isomeric framework Mg2(m-dobdc) (m-dobdc4- = 2,4-dioxidobenzene-1,5-dicarboxylate) and the expanded framework Mg2(dobpdc) (dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) under solvent-free conditions for the first time. The MOFs prepared using this method possess high crystallinities and surface areas, with the Mg2(m-dobdc) prepared herein representing the first reported permanently porous variant of this framework. This new sustainable mechanochemical synthesis of MOF-74 analogues should enable their preparation on a large scale for industrial applications.

Optimizing Fe-Based Metal-Organic Frameworks through Ligand Conformation Regulation for Efficient Dye Adsorption and C2 H2 /CO2 Separation

Regulating the structure of metal-organic frameworks (MOFs) by adjusting the ligands reasonably is expected to enhance the interaction of MOFs on special molecules/ions, which has significant application value for the selective adsorption of guest molecules. Herein, two tricarboxylic ligands H₃ L-Cl and H₃ L-NH₂ were designed and synthesized based on the ligand H₃ TTCA by replacing part of the benzene rings with C=C bonds and modifying the chlorine and amino groups on the 4-position of the benzene ring. Two 3D Fe-MOFs (UPC-60-Cl and UPC-60-NH₂ ) with the new topology types were constructed. As the C=C bonds of the ligands have flexible torsion angles, UPC-60-Cl features three types of irregular 2D channels, while UPC-60-NH₂ has a cage with two types of windows on the surface. The synergistic effect of unique channels and modification of functional groups endows UPC-60-Cl and UPC-60-NH₂ with high adsorption capacity for organic dyes. Compound UPC-60-Cl shows high adsorption capacity for CV (147.2 mg g^-1 ), RHB (100.3 mg g^-1 ), and MO (220.9 mg g^-1 ), whereas UPC-60-NH₂ exhibits selective adsorption of MO (158.7 mg g^-1 ). Meanwhile, based on the diverse pore structure and modification of active sites, UPC-60-Cl and UPC-60-NH₂ show the selective separation of equimolar C₂ H₂ /CO₂ . Therefore, reasonable regulation of organic ligands plays a significant role in guiding the structure diversification and performance improvement of MOFs.

Photoinduced Electron-Transfer (PIET) Strategy for Selective Adsorption of CO2 over C2 H2 in a MOF

Similarities in sizes, shapes, and physical properties between carbon dioxide (CO₂ ) and acetylene (C₂ H₂ ) make it a great challenge to separate the major impurity CO₂ from products in C₂ H₂ production. The use of porous materials is an appealing path to replace current very costly and energy-consuming technologies, such as solvent extraction and cryogenic distillation; however, high CO₂ /C₂ H₂ uptake ratio with minor adsorption of C₂ H₂ at standard pressure was only unexpectedly observed in scarce examples in recent years although the related research started early at 1950s, and general design strategies to realize this aim are still absent. This work has successfully developed an efficient PIET strategy and obtained the second highest CO₂ /C₂ H₂ adsorption ratio for porous materials in a proof-of-concept MOF with a photochromism-active bipyridinium zwitterion. An unprecedented photocontrollable gate effect, owing to change of interannular dihedral after photoinduced generation of radical species, was also observed for the first time. These findings will inspire design and synthesis of porous materials for high efficient gas adsorption and separation.

Robust metal-organic framework with multiple traps for trace Xe/Kr separation

Direct separation of Xe and Kr from air or used nuclear fuel (UNF) off-gas by means of porous adsorbents is of industrial importance but is a very challenging task. In this work, we show a robust metal-organic framework (MOF), namely ECUT-60, which renders not only high chemical stability, but also unique structure with multiple traps. This leads to the ultrahigh Xe adsorption capacity, exceeding most reported porous materials. Impressively, this MOF also enables high selectivity of Xe over Kr, CO₂, O₂, and N₂, leading to the high-performance separation for trace quantitites of Xe/Kr from a simulated UNF reprocessing off-gas. The separation capability has been demonstrated by using dynamic breakthrough experiments, giving the record Xe uptake up to 70.4 mmol/kg and the production of 19.7 mmol/kg pure Xe. Consequently, ECUT-60 has promising potential in direct production of Xe from UNF off-gas or air. The separation mechanism, as unveiled by theoretical calculation, is attributed to the multiple traps in ECUT-60 that affords rigid restrict for Xe atom via van der Waals force.

Benchmark C2 H2 /CO2 Separation in an Ultra-Microporous Metal-Organic Framework via Copper(I)-Alkynyl Chemistry

Separation of acetylene from carbon dioxide remains a daunting challenge because of their very similar molecular sizes and physical properties. We herein report the first example of using copper(I)-alkynyl chemistry within an ultra-microporous MOF (Cu^I @UiO-66-(COOH)₂ ) to achieve ultrahigh C₂ H₂ /CO₂ separation selectivity. The anchored Cu^I ions on the pore surfaces can specifically and strongly interact with C₂ H₂ molecule through copper(I)-alkynyl π-complexation and thus rapidly adsorb large amount of C₂ H₂ at low-pressure region, while effectively reduce CO₂ uptake due to the small pore sizes. This material thus exhibits the record high C₂ H₂ /CO₂ selectivity of 185 at ambient conditions, significantly higher than the previous benchmark ZJU-74a (36.5) and ATC-Cu (53.6). Theoretical calculations reveal that the unique π-complexation between Cu^I and C₂ H₂ mainly contributes to the ultra-strong C₂ H₂ binding affinity and record selectivity. The exceptional separation performance was evidenced by breakthrough experiments for C₂ H₂ /CO₂ gas mixtures. This work suggests a new perspective to functionalizing MOFs with copper(I)-alkynyl chemistry for highly selective separation of C₂ H₂ over CO₂ .

Classified Encapsulation of an Organic Dye and Metal-Organic Complex in Different Molecular Compartments for White-Light Emission and Selective Adsorption of C2H2 over CO2

Encapsulating a certain guest molecule in an assigned molecular compartment and then endowing the corresponding potential remains a huge challenge for metal-organic frameworks. To this end, we demonstrate a good example, for the first time, based on an actinide-based MOF. The used MOF (namely, ECUT-300) shows a unique uranyl-TPE anionic skeleton with three distinct cages, viz., mesopore A (2.8 nm), mesopore B (2.0 nm), and micropore C (0.9 nm). Through solid-liquid reaction, a RhB⁺ molecule can be encapsulated into ECUT-300 with the exact location in mesopore B, whereas the encapsulation of a metal-organic cation of [Fe(tpy)₂]³⁺ was observed with the location in micropore C, suggesting unprecedented classified encapsulation. Impressively, the potential of the resulting guest@MOF composites is also highly dependent on the type of encapsulated guest molecules, for example, white-light emission for RhB⁺ and selective adsorption of C₂H₂ over CO₂ for [Fe(tpy)₂]³⁺.

Modulation of Topological Structures and Adsorption Properties of Copper-Tricarboxylate Frameworks Enabled by the Effect of the Functional Group and Its Position

To push forward the structural development and fully explore the potential utility, it is highly desired but challenging to regulate in a controllable manner the structures and properties of MOFs. In this work, we reported the structural and functional modulation of Cu(II)-tricarboxylate frameworks by employing a strategy of engineering the functionalities and their positions. Two pairs of unsymmetrical biaryl tricarboxylate ligands modified with a methyl group and a pyridinic-N atom at distinct positions were logically designed and synthesized, and their corresponding Cu(II)-based MOFs were solvothermally constructed. Diffraction analyses revealed that the variation of functionalities and their positions furnished three different types of topological structures, which we ascribed to the steric effect exerted by the methyl group and the chelating effect involving the pyridinic-N atom. Furthermore, gas adsorption studies showed that three of them are potential candidates as solid separation media for acetylene (C₂H₂) purification, with the separation potential tailorable by altering functionalities and their locations. At 106.7 kPa and 298 K, the C₂H₂ uptake capacity varies from 64.1 to 132.4 cm³ (STP) g^-1, while the adsorption selectivities of C₂H₂ over its coexisting components of CO₂ and CH₄ fall in the ranges of 3.28-4.60 and 14.1-21.9, respectively.

Realization of Ethylene Production from Its Quaternary Mixture through Metal-Organic Framework Materials

Ethylene production from oxidative coupling of methane is a sustainable and economically attractive alternative to that through traditional hydrocarbon cracking technology. However, efficient ethylene separation from the complex reaction mixture is a daunting challenge that hinders the practical adoption of this technology. Herein, we report the efficient adsorptive separation of the CH₄/CO₂/C₂H₄/C₂H₆ mixture using three representative metal-organic frameworks (MOFs) (UTSA-74, MOF-74, and HKUST-1) with diverse open metal sites. The efficient separation relies on tuning the selectivity through the convergence of characteristics including Lewis acidity of open metal sites, pore space, and cooperative binding behavior. The separation performance of these materials has been evaluated through single-component gas adsorption and dynamic breakthrough experiments. HKUST-1 provides the highest separation potential (4.1 mmol/g) thanks to its simultaneously high ideal adsorbed solution theory (IAST) selectivity and ethylene adsorption capacity, representing a benchmark material for such a challenging quaternary separation.

Cage-Like Porous Materials with Simultaneous High C2 H2 Storage and Excellent C2 H2 /CO2 Separation Performance

Adsorption-based separation is an important technology for C₂ H₂ purification due to the environmentally friendly and energy-efficient advantage. In addition to the high selectivity of C₂ H₂ /CO₂ , the high uptake of C₂ H₂ also plays an important role in the separation progress. However, the trade-off between adsorption capacity and separation performance is still in a dilemma. Herein, we report a series of cage-like porous materials named FJI-H8-R (R=Me, Et, ⁿ Pr and ⁱ Pr) which all have high C₂ H₂ uptakes at 1 bar and 298 K. Dynamic breakthrough studies show that they all exhibit excellent C₂ H₂ /CO₂ separation performance. Particularly, FJI-H8-Me possesses a long breakthrough time up to 90 min g^-1 . Additionally, Grand Canonical Monte Carlo (GCMC) simulation reveals that the suitable pore space and geometry contribute much to the excellent separation performance.

Targeted degradation of dimethyl phthalate by activating persulfate using molecularly imprinted Fe-MOF-74

Adsorptive removal of dimethyl phthalate (DMP) in water combined with advanced oxidation processes (AOPs) has attracted interest. In this work, the adsorptive and catalytic properties of an Fe-based metal-organic framework (Fe-MOF-74) have been improved by molecular imprinting technique. The adsorption behaviors have been evaluated by the Freundlich and pseudo-second-order model. The results have shown that selective adsorption ability of the material for DMP was highly enhanced and chemisorption was dominating. A 1.5-fold increase in catalytic rate after being modified by molecular imprinting indicated that the selective adsorption is crucial. In the synergy of adsorption and catalysis, DMP was first specifically adsorbed on the surface of the material by hydrogen bonds and electrostatic interactions. Then, hydroxyl radicals and sulfate radicals, which were both generated via activation of persulfate (PS), catalytically oxidized DMP. The degradation rate can rapidly reach around 90% in 30 min and three possible degradation pathways were proposed. The molecular imprinting modified catalyst can be used for DMP effective degradation in water.

Electrostatically Driven Selective Adsorption of Carbon Dioxide over Acetylene in an Ultramicroporous Material

Separating acetylene from carbon dioxide is important but highly challenging owing to their similar physical properties and molecular dimensions. Herein, we report highly efficient electrostatically driven CO2 /C2 H2 separation in an ultramicroporous cadmium nitroprusside (Cd-NP) with compact pore space and complementary electrostatic potential well fitting for CO2 , thus enabling molecular quadrupole moment recognition of CO2 over C2 H2 . This material shows a high CO2 /C2 H2 uptake ratio of 6.0 as well as remarkable CO2 /C2 H2 selectivity of 85 under ambient conditions with modest CO2 heat of adsorption. Neutron powder diffraction experiments and molecular simulations revealed that the electrostatic potential compatibility between pore structure and CO2 allows it to be trapped in a head-on orientation towards the Cd center, whereas the diffusion of C2 H2 is electrostatically forbidden. Dynamic breakthrough experiments have validated the separation performance of this compound for CO2 /C2 H2 separation.

Two Tb-metal organic frameworks with different metal cluster nodes for C2H2/CO2 separation

Through regulating the reaction solvent and temperature, two Tb-based metal-organic frameworks, ((CH₃)₂NH₂)₂[Tb₉(μ₃-OH)₈(μ₂-OH)₃(PTB)₆]·(DMF)₁₄·(H₂O)₁₉ (1) and ((CH₃)₂NH₂)₃{[Tb₉(μ₃-O)₂(μ₃-OH)₁₂(H₂O)₆][Tb₃(μ₃-O)(HCO₂)₃ (PTB)₆]}·(DMF)₁₂·(H₂O)₇ (2) (H₃PTB = pyridine-2,4,6-tribenzoic acid), have been synthesized. Structural analysis showed that the cluster node of 1 is a Tb₉ cluster, while 2 contains two different nodes of a Tb₃ cluster and a Tb₉ cluster, which leads to their different pore structures and may potentially separate C₂H₂/CO₂. Gas adsorption demonstrates that both MOFs can separate C₂H₂ and CO₂, but 2 has a more optimized pore environment than 1 and can exhibit better selective separation of C₂H₂/CO₂.

An Unprecedented Pillar-Cage Fluorinated Hybrid Porous Framework with Highly Efficient Acetylene Storage and Separation

Despite much intense investigation on the C₂ H₂ /CO₂ separation, the trade-off between the adsorption capacity and separation selectivity is still tricky. To overcome the dilemma, we have rationally synthesized an ultra-stable fluorinated hybrid porous material SIFSIX-Cu-TPA with the ith-d topology. Completely differing from the famous pillar-layer fluorinated materials, SIFSIX-Cu-TPA possesses a unique pillar-cage structure, in which the SiF₆ ^2- anions cross-link two adjacent metal nodes as pillars to stabilize the three-dimensional framework constructed by icosahedral and tetrahedral cages. As anticipated, SIFSIX-Cu-TPA has high BET surface area (1330 m²  g^-1 ) as well as high C₂ H₂ uptake (185 cm³  g^-1 at 298 K and 1 bar). At the same time, due to the obvious difference in the adsorption performance of CO₂ and C₂ H₂ especially in the low pressure area, SIFSIX-Cu-TPA also exhibits an excellent C₂ H₂ /CO₂ separation performance (breakthrough time up to 68 min g^-1 at 298 K and 1 bar).

Precise Pore Space Partitions Combined with High-Density Hydrogen-Bonding Acceptors within Metal-Organic Frameworks for Highly Efficient Acetylene Storage and Separation

The high storage capacity versus high selectivity trade-off barrier presents a daunting challenge to practical application as an acetylene (C₂ H₂ ) adsorbent. A structure-performance relationship screening for sixty-two high-performance metal-organic framework adsorbents reveals that a moderate pore size distribution around 5.0-7.5 Å is critical to fulfill this task. A precise pore space partition approach was involved to partition 1D hexagonal channels of typical MIL-88 architecture into finite segments with pore sizes varying from 4.5 Å (SNNU-26) to 6.4 Å (SNNU-27), 7.1 Å (SNNU-28), and 8.1 Å (SNNU-29). Coupled with bare tetrazole N sites (6 or 12 bare N sites within one cage) as high-density H-bonding acceptors for C₂ H₂ , the target MOFs offer a good combination of high C₂ H₂ /CO₂ adsorption selectivity and high C₂ H₂ uptake capacity in addition to good stability. The optimized SNNU-27-Fe material demonstrates a C₂ H₂ uptake of 182.4 cm³  g^-1 and an extraordinary C₂ H₂ /CO₂ dynamic breakthrough time up to 91 min g^-1 under ambient conditions.

A window-space-directed assembly strategy for the construction of supertetrahedron-based zeolitic mesoporous metal-organic frameworks with ultramicroporous apertures for selective gas adsorption

Despite their scarcity due to synthetic challenges, supertetrahedron-based metal-organic frameworks (MOFs) possess intriguing architectures, diverse functionalities, and superb properties that make them in-demand materials. Employing a new window-space-directed assembly strategy, a family of mesoporous zeolitic MOFs have been constructed herein from corner-shared supertetrahedra based on homometallic or heterometallic trimers [M3(OH/O)(COO)6] (M3 = Co3, Ni3 or Co2Ti). These MOFs consisted of close-packed truncated octahedral cages possessing a sodalite topology and large β-cavity mesoporous cages (∼22 Å diameter) connected by ultramicroporous apertures (∼5.6 Å diameter). Notably, the supertetrahedron-based sodalite topology MOF combined with the Co2Ti trimer exhibited high thermal and chemical stability as well as the ability to efficiently separate acetylene (C2H2) from carbon dioxide (CO2).

A Robust Cage-Based Metal-Organic Framework Showing Ultrahigh SO2 Uptake for Efficient Removal of Trace SO2 from SO2/CO2 and SO2/CO2/N2 Mixtures

Removal of trace SO₂ from an SO₂-containing product is now receiving increasing attention. However, designing a robust porous adsorbent with high SO₂ adsorption capacity and good SO₂/CO₂ selectivity, as well as validity under humid conditions, is still a challenging task. Herein, we report a porous cage-based metal-organic framework, namely ECUT-111, which contains two distinct cages with apertures of 5.4 and 10.2 Å, respectively, and shows high a BET of up to 1493 m²/g and a pore volume of 0.629 cm³/g. Impressively, ECUT-111 enables an ultrahigh SO₂ uptake of up to 11.56 mmol/g, exceeding most reported top-performing adsorbents for such a use. More importantly, complete separation of trace SO₂ from SO₂/CO₂ and SO₂/CO₂/N₂ mixtures, especially under humid conditions, and excellent recycle use were observed for ECUT-111, suggesting its superior application in desulfurization of SO₂-containing products.

Multiple Functions of Gas Separation and Vapor Adsorption in a New MOF with Open Tubular Channels

Separation or purification is one of the difficult problems in the petrochemical industry. To help solve the difficulty of separation or purification for C₂H₂/CO₂ and C₂H_n/CH₄ in the chemical industry, we synthesized a new metal-organic framework (MOF), [Ni(dpip)]·2.5DMF·H₂O (1), by a bipyridyl-substituted isophthalic acid ligand. The MOF includes two types of one-dimensional (1D) tubular channels with different sizes and porous environments. The unique tubular channels lead to not only remarkable gas sorption capacity of C₂H₄, C₂H₂, and CO₂, but also good selectivity for C₂H₂/CH₄, C₂H₂/CH₄, CO₂/CH₄, and C₂H₂/CO₂, as demonstrated by single-component sorption isotherm results, ideal adsorbed solution theory calculations, and dynamic breakthrough curves. Grand canonical Monte Carlo (GCMC) simulation reveals preferential adsorption sites in the MOF for CO₂, C₂H₂, and C₂H₄. The MOF also exhibits an obvious size-selective absorption effect on vapor molecules.

Robust 4d-5f Bimetal-Organic Framework for Efficient Removal of Trace SO2 from SO2/CO2 and SO2/CO2/N2 Mixtures

Herein, we report a highly rare robust 4d-5f bimetal-organic framework that shows high porosity and thermal/chemical stability and thus is capable of removing trace SO₂ from a SO₂/CO₂/N₂ mixture even under humid conditions. This work not only shows a novel adsorbent for SO₂ removal but also extends the function of actinium-based coordination compounds.

Selective capture of carbon dioxide from hydrocarbons using a metal-organic framework

Efficient and sustainable methods for carbon dioxide capture are highly sought after. Mature technologies involve chemical reactions that absorb CO2, but they have many drawbacks. Energy-efficient alternatives may be realised by porous physisorbents with void spaces that are complementary in size and electrostatic potential to molecular CO2. Here, we present a robust, recyclable and inexpensive adsorbent termed MUF-16. This metal-organic framework captures CO2 with a high affinity in its one-dimensional channels, as determined by adsorption isotherms, X-ray crystallography and density-functional theory calculations. Its low affinity for other competing gases delivers high selectivity for the adsorption of CO2 over methane, acetylene, ethylene, ethane, propylene and propane. For equimolar mixtures of CO2/CH4 and CO2/C2H2, the selectivity is 6690 and 510, respectively. Breakthrough gas separations under dynamic conditions benefit from short time lags in the elution of the weakly-adsorbed component to deliver high-purity hydrocarbon products, including pure methane and acetylene.

Supramolecular Cu(ii)–dipyridyl frameworks featuring weakly coordinating dodecaborate dianions for selective gas separation

Several novel weakly coordinating dodecaborate anion hybrid supramolecular Cu(ii)–dipyridyl frameworks were synthesized and characterized by single crystal analysis with one potential for selective C₂H₂/C₂H₄ and C₂H₂/CO₂ separation.

Engineering ligand conformation by substituent manipulation towards diverse copper-tricarboxylate frameworks with tuned gas adsorption properties

To expand the structural diversity and optimize the material performance, it is essential but challenging to regulate MOF structures in a predictable and controllable manner. In this work, by manipulating the substituents to engineer the ligand conformations, we designed and synthesized two asymmetric tricarboxylate ligands, and used them to successfully target two copper-tricarboxylate frameworks with diversified topologies depending on the ligand conformations. Besides, the ligand asymmetry induced the formation of two uncommon kinds of copper-carboxylate clusters, thus greatly expanding the library of copper-carboxylate secondary building units. Furthermore, the two compounds also displayed tunable gas adsorption properties pertinent to C2H2 separation and purification. At 298 K and 1 atm, the uptake capacity of C2H2 varies from 79.5 to 104.6 cm3 (STP) g-1, while the adsorption selectivities of C2H2 with respect to CO2 and CH4 are in the range of 2.3-3.8 and 15.3-21.6 for the equimolar components, respectively. Compared to the nitro counterpart, the methoxy MOF features higher C2H2 uptake capacity, larger C2H2/CO2 and C2H2/CH4 adsorption selectivities, and lower regeneration energy. This work demonstrates that simple ligand modification can be used to engineer the structures and tune gas adsorption properties of the resulting MOFs.