Critical aggregation concentration in mixed solutions of anionic polyelectrolytes and cationic surfactants

Internal organisation in polyelectrolytes/oppositely charged surfactants colloidal complexes anticipating precipitated nanostructures

In this paper, we relate the periodic nanostructures found in the colloidal complexes and the concentrated phases obtained with polyelectrolyte/surfactant aqueous solutions. We present small-angle X-ray scattering studies of the self-organisation of the anionic polymer carboxymethylcellulose with three cationic quaternary ammonium surfactants with different head and tail groups: hexadecyl trimethyl, hexadecyl ethyl dimethyl and didodecyl dimethyl ammonium bromides. We investigated the mesophases obtained above a precipitation threshold. The mixed solutions with the double-chained surfactant led to lamellar phases, in which the repeat distance only depends on the surfactant/carboxyl charge molar ratio. We show that an internal lamellar organisation already takes place in the dilute phase containing colloidal complexes found below the precipitation threshold.

Self-aggregation of mixtures of oppositely charged polyelectrolytes and surfactants studied by rheology, dynamic light scattering and small-angle neutron scattering

In this study, the phase behavior, structure and properties of systems composed of the cationic, cellulose-based polycation JR 400 and the anionic surfactants sodium dodecylbenzenesulfonate (SDBS) or sodium dodecylethoxysulfate (SDES), mainly in the semidilute regime, were examined. This system shows the interesting feature of a very large viscosity increase by nearly 4 orders of magnitude as compared to the pure polymer solution already at very low concentrations of 1 wt%. By using rheology, dynamic light scattering (DLS), and small-angle neutron scattering (SANS), we are able to deduce systematic correlations between the molecular composition of the systems (characterized by the charge ratio Z=[+(polymer)]/[−(surfactant)]), their structural organization and the resulting macroscopic flow behavior. Mixtures in the semidilute regime with an excess of polycation charge form highly viscous network structures containing rodlike aggregates composed of surfactant and polyelectrolyte that are interconnected by the long JR 400 chains. Viscosity and storage modulus follow scaling laws as a function of surfactant concentration (η~c(s)(4); G(0)~c(s)(1.5)) and the very pronounced viscosity increase mainly arises from the strongly enhanced structural relaxation time of the systems. In contrast, mixtures with excess surfactant charges form solutions with viscosities even below those of the pure polymer solution. The combination of SANS, DLS, and rheology shows that the structural, dynamical, and rheological properties of these oppositely charged polyelectrolyte/surfactant systems can be controlled in a systematic fashion by appropriately choosing the systems composition.

Interface interaction within nanopores in thin films of an amphiphilic block copolymer and CTAB

With water droplets as sacrificed templates at a particular humidity, micro-porous solid thin films were successfully fabricated by self-assembly using an amphiphilic block polymer, polystyrene-b-polyacrylic acid (PS-b-PAA). Interface interactions between the micro-porous thin film and a cationic surfactant, cetyltrimethylammonium bromide (CTAB), are investigated by in-situ AFM in aqueous solutions. An interesting phenomenon was observed in water and CTAB solution, which the dimensions of the micropores are remarkably larger than the dimensions of those in air. The solid thin films exhibit different surface morphologies in response to stimulus by different concentrations of CTAB. These observations were explained by positing that the PAA chains in the micropores stretch and contract with interface interactions between PAA and CTAB. A promising electrochemical application of this film is suggested. This study is aimed at strategies for the functionalization of stimulus-responsive micro-porous solid thin films with tunable surface morphologies, and exploring new smart materials.

Complexes of surfactants with oppositely charged polymers at surfaces and in bulk

Addition of surfactants to aqueous solutions of polyelectrolytes carrying an opposite charge causes the spontaneous formation of complexes in the bulk phase in certain concentration ranges. Under some conditions, compact monodisperse multichain complexes are obtained in the bulk. The size of these complexes depends on the mixing procedure and it can be varied in a controlled way from nanometers up to micrometers. The complexes exhibit microstructures analogous to those of the precipitates formed at higher concentrations. In other cases, however, the bulk complexes are large, soft and polydisperse. In most cases, the dispersions are only kinetically stable and exhibit pronounced non-equilibrium features. Association at air-water interfaces readily occurs, even at very small concentrations. When the surfactant concentration is small, the surface complexes are usually made of a surfactant monolayer to which the polymer binds and adsorbs in a flat-like configuration. However, under some conditions, thicker layers can be found, with bulk complexes sticking to the surface. The association at solid-water interfaces is more complex and depends on the specific interactions between surfactants, polymers and the surface. However, the behaviour can be understood if distinctions between hydrophilic surfaces and hydrophobic surfaces are made. Note that the behaviour at air-water interfaces is closer to that of hydrophobic than that of hydrophilic solid surfaces. The relation between bulk and surface complexation will be discussed in this review. The emphasis will be given to the results obtained by the teams of the EC-funded Marie Curie RTN "SOCON".

A study of interaction of cationic dyes with anionic polyelectrolytes

The interactions of Acridine Orange with Sodium Alginate and Pinacyanol Chloride with Heparin have been investigated by spectrophotometric method. The polymers induce metachromasy in the dye as evidenced from the considerable blue shift in the absorption maxima of the corresponding dyes. The interaction constant and thermodynamic parameters of polymer-dye interactions have been determined. The effect of additives such as alcohols, and urea on the reversal of metachromasy has been studied. The data has been used to determine the stability of the metachromatic complex and the nature of binding. The thermodynamic parameters of interaction revealed that binding between Acridine Orange and Sodium Alginate involved only electrostatic forces while that between Pinacyanol Chloride involved both electrostatic and hydrophobic forces. The reversal studies using surfactants indicated the involvement of both electrostatic and hydrophobic forces in binding. Based on the results it can be concluded that Pinacyanol Chloride is more effective inducing metachromasy than Acridine Orange.

A comparative study of polyelectrolyte-dye interactions

The interaction of Azure B with sodium alginate and heparin in aqueous solution has been studied by spectrophotometric method. Absorbance of Azure B at 645 nm decreases and a new band appeared at 545 nm and at 556 nm respectively which indicated that a new metachromatic complex formed. A linear decrease in absorbance is noted. It was found that sodium alginate is more effective than heparin in decreasing the absorbance of Azure B at 645 nm. The stoichiometry of sodium alginate or heparin with Azure B was determined by spectrophotometry. The results suggested that the interaction between Azure B with sodium alginate or heparin was a result of electrostatic forces and the difference between heparin and sodium alginate were attributed to the different negative charge number on repetitive disaccharides unit. Studies on the effect of alcohol or urea indicated that sodium alginate and heparin interacted with the aggregates of Azure B. Thermodynamic parameters of interaction has been evaluated to determine the stability of the metachromatic complex. The effect of surfactants on reversal of metachromasy has also been studied.

Complexation of oppositely charged polyelectrolytes and surfactants in aqueous solutions. A review

Addition of surfactants to aqueous solutions of polyelectrolytes causes the spontaneous formation of complexes in a certain range of concentrations. In some conditions, compact monodisperse multichain complexes are obtained (short surfactant chain length and polymer rigid enough). The size of the complexes can be varied in controlled way from nanometers up to micrometers, but depends on the mixing procedure, whereas the shape of the complexes depends on the polymer backbone rigidity. These complexes exhibit microstructures analogue to that of the precipitates formed at higher concentrations. In most cases, however, the complexes are large, soft and polydisperse.

Polysaccharide/Surfactant complexes at the air-water interface - effect of the charge density on interfacial and foaming behaviors

The binding of a cationic surfactant (hexadecyltrimethylammonium bromide, CTAB) to a negatively charged natural polysaccharide (pectin) at air-solution interfaces was investigated on single interfaces and in foams, versus the linear charge densities of the polysaccharide. Besides classical methods to investigate polymer/surfactant systems, we applied, for the first time concerning these systems, the analogy between the small angle neutron scattering by foams and the neutron reflectivity of films to measure in situ film thicknesses of foams. CTAB/pectin foam films are much thicker than the pure surfactant foam film but similar for high- and low-charged pectin/CTAB systems despite the difference in structure of complexes at interfaces. The improvement of the foam properties of CTAB bound to pectin is shown to be directly related to the formation of pectin-CTAB complexes at the air-water interface. However, in opposition to surface activity, there is no specific behavior for the highly charged pectin: foam properties depend mainly upon the bulk charge concentration, while the interfacial behavior is mainly governed by the charge density of pectin. For the highly charged pectin, specific cooperative effects between neighboring charged sites along the chain are thought to be involved in the higher surface activity of pectin/CTAB complexes. A more general behavior can be obtained at lower charge density either by using a low-charged pectin or by neutralizing the highly charged pectin in decreasing pH.

Poly(vinylpyridine) core/poly(N-isopropylacrylamide) shell microgel particles: their characterization and the uptake and release of an anionic surfactant

The use of microgel particles for controlled uptake and release of active species has great potential. The compatibility of microgel particles with their environment and the functionality of the particles can be achieved by modification of the core microgel through the addition of a shell. In this work, core-shell microgel particles, with a pH-responsive core (polyvinylpyridine) and a temperature-responsive shell (poly-N-isopropylacrylamide), have been prepared and characterized. The uptake and release of an anionic surfactant from the microgels has been investigated as a function of solution pH and temperature. The results indicate that electrostatic attraction between the anionic surfactant and the cationically charged core of the microgel particles is the dominant mechanism for absorption of the surfactant into the core-shell microgel particles.

Aggregate formation in aqueous solutions of carboxymethylcellulose and cationic surfactants

The addition of cationic surfactants to an aqueous solution of an anionic polymer, carboxymethylcellulose (carboxyMC), causes the spontaneous formation of aggregates in a certain range of concentrations. Here we studied two surfactants, dodecyl and hexadecyl trimethylammonium bromide (DTAB and CTAB, respectively). Using different techniques (light scattering, potentiometry, viscosimetry, and zetametry), we found that a simple lengthening of the surfactant tail length by four CH2 groups drastically changes the aggregate morphology, size, and charge. We explored in detail how the surfactant and polymer concentrations act on these systems.

Nanostructures of colloidal complexes formed in oppositely charged polyelectrolyte/surfactant dilute aqueous solutions

Small-angle neutron scattering measurements were performed on dilute solutions of carboxymethylcellulose/DTAB complexes in water in order to determine their size, shape and internal structures. At low polymer content, the complexes are spherical, rather monodisperse and probably made of polymer chains intercalated between surfactant micelles. Moreover, we show that these micelles have a similar cubic arrangement than found in polymer/surfactant precipitates formed at higher surfactant concentrations. At larger polymer content, in the semi-dilute polyelectrolyte regime, the complexes are larger, softer and polydisperse. However, they possess a similar internal structure in both regimes. Carboxymethylcellulose/CTAB complexes are also large, soft and polydisperse but do not seem to exhibit well-defined internal structures.

Polymer/surfactant interactions at the air/water interface

The development of neutron reflectometry has transformed the study and understanding of polymer/surfactant mixtures at the air/water interface. A critical assessment of the results from this technique is made by comparing them with the information available from other techniques used to investigate adsorption at this interface. In the last few years, detailed information about the structure and composition of adsorbed layers has been obtained for a wide range of polymer/surfactant mixtures, including neutral polymers and synthetic and naturally occurring polyelectrolytes, with single surfactants or mixtures of surfactants. The use of neutron reflectometry together with surface tensiometry, has allowed the surface behaviour of these mixtures to be related directly to the bulk phase behaviour. We review the broad range of systems that have been studied, from neutral polymers with ionic surfactants to oppositely charged polyelectrolyte/ionic surfactant mixtures. A particular emphasis is placed upon the rich pattern of adsorption behaviour that is seen in oppositely charged polyelectrolyte/surfactant mixtures, much of which had not been reported previously. The strong surface interactions resulting from the electrostatic attractions in these systems have a very pronounced effect on both the surface tension behaviour and on adsorbed layers consisting of polymer/surfactant complexes, often giving rise to significant surface ordering.

Calorimetric Determination of Surfactant/Polyelectrolyte Binding Isotherms

Mixing of oppositely charged surfactants and polyelectrolytes in aqueous solutions leads to cooperative surfactant adsorption onto the polyelectrolyte chains. Experimental determination of surfactant/polyelectrolyte binding isotherms is usually done using custom-built surfactant-ion-specific electrodes. As an alternative, we present an indirect isotherm approximation method that uses conventional isothermal titration calorimetry (ITC). The calorimetric data is fitted to the two-binding-state Satake-Yang adsorption model, which quantifies the extent of binding in terms of the binding constant (Ku) and the cooperativity parameter (u). This approach is investigated using two surfactant/polyelectrolyte mixtures: sodium perfluorooctanoate (FC7) and N,N,N-trimethylammonium derivatized hydroxyethyl cellulose (UCARE Polymer JR-400), whose binding behavior follows the Satake-Yang model, and dodecyltrimethylammonium bromide (DTAB) and poly(styrenesulfonate) (NaPSS), whose behavior deviates dramatically from the Satake-Yang model. These studies demonstrate that, in order to apply the indirect ITC method of binding isotherm determination, the surfactant/polyelectrolyte adsorption process must have no more than two dominant binding states. Thus, the technique works well for the FC7/JR-400 mixture. It fails in the case of the DTAB/NaPSS adsorption, but its mode of failure offers insight into the multiple-binding-state adsorption mechanism.

Co-adsorption of carboxymethyl-cellulose and cationic surfactants at the air-water interface

We investigated the interaction between an anionic polyelectrolyte (carboxymethylcellulose) and cationic surfactants (DTAB, TTAB, and CTAB) at the air/water interface, using surface tension, ellipsometry, and Brewster angle microscopy techniques. At low surfactant concentration, a synergistic phenomenon is observed due to the co-adsorption of polyelectrolyte/surfactant complexes at the interface, which decreases the surface tension. When the surfactant critical aggregation concentration (cac) is reached, the adsorption saturates and the thickness of the adsorbed monolayer remains constant until another characteristic surfactant concentration, C0, is reached, at which all the polymer charges are bound to surfactant in bulk. Above C0, the absorbed monolayer becomes much thicker, suggesting adsorption of bulk aggregates, which have become more hydrophobic due to charge neutralization.

Equilibrium and dynamic aspects of dodecyltrimethylammonium bromide adsorption at the air/water interface in the presence of λ-carrageenan

In this work we present equilibrium and dynamic surface tension together with dilational elasticity data for dodecyltrimethylammonium bromide in the presence of lambda-carrageenan, a sulfated polysaccharide extracted from algae. The critical aggregation concentration and (CAC) and critical micellar concentration CMC of the mixed system were determined and shown to have a direct influence on the elasticity modulus. The behavior of the adsorption kinetics was shown to be dependent on the surfactant to polyelectrolyte charge ratio or excess species in the bulk solution.

Sodium carboxymethylcellulose-CTAB interaction: a detailed thermodynamic study of polymer-surfactant interaction with opposite charges

Interaction between polymer and surfactant bearing opposite charges is much more complex from a physicochemical point of view as compared to interaction between ionic surfactant and nonionic polymer. Electrostatic and hydrophobic interactions interplay in the former, whereas the hydrophobic effect is the prevailing factor in the latter. We have studied the interaction between a water-soluble polyanion, sodium salt of carboxymethylcellulose (NaCMC), with a cationic amphiphile, CTAB, in aqueous medium. There were manifold discrepancies with the reported works in NaCMC-alkyltrimethylammonium bromide, which is assumed to be an effect of difference in degree of substitution, which in turn affects the charge density of the polymer chain. We have noticed that the bulk complexation and interfacial interaction driven by electrostatic forces operate side by side. Thereafter, there is a wrapping process by the polyanion to the polymer-induced smaller surfactant aggregates driven by increase in entropy of the solution as a result of expulsion of the counterions from the ionic atmosphere around the surfactant aggregate. Because of the electrostatic interaction, hydrophobicity of the polymer-surfactant complex increases, leading to coacervation, and again solubilization in the hydrophobic core of the self-aggregated structure provided by the added excess CTAB. The tensiometric, conductometric, microcalorimetric, and turbidimetric techniques have been applied to address these problems.

On-line sample preconcentration by sweeping with dodecyltrimethylammonium bromide in capillary zone electrophoresis

On-line sample preconcentration of oligonucleotides with a new sweeping carrier was developed by using dodecyltrimethylammonium bromide (DTAB) below the critical micelle concentration (CMC). The sweeping results with DTAB below and above the CMC were compared. The use of DTAB below the CMC benefits the preconcentration of the oligonucleotides, while the use of DTAB above the CMC is good for hydrophobic small molecules. The factors affecting the sweeping results were optimized and this method was evaluated by constructing calibration curves for thrombin aptamers. The sweeping scheme produced a 112-fold sensitivity enhancement for the oligonucleotides relative to that run in a running buffer without DTAB. The sweeping method developed here can be a good reinforcement of the preconcentration scheme by sweeping when less-hydrophobic analytes or large negatively-charged molecules need to be preconcentrated.

Interaction of cationic surfactants with carboxymethylcellulose in aqueous media

We have examined the polymer-surfactant interaction in mixed solutions of the cationic surfactants, i.e., dodecyltrimethylammonium chloride, dodecyltrimethylammonium bromide, tetradecyltrimethylammonium bromide, hexadecyltrimethylammonium bromide, tetradecyltriphenylphosphonium bromide, and tetradecylpyridinium bromide and a semiflexible anionic polyelectrolyte carboxymethylcellulose in water and aqueous salt solutions by various techniques: tensiometry, viscosimetry or ion-selective electrode method, and dynamic light scattering. We have investigated the effect of varying surfactant chain length, head group size, counterion, and ionic strength on the critical aggregation concentration (CAC) of mixed polymer surfactant systems and the collapse of the polymer molecule under different solution conditions. The CAC decreases with increasing alkyl chain length. Above a certain surfactant concentration, mixed aggregates start growing until their macroscopic phase separation. The growth is more rapid with greater surfactant tail length and with increasing head group size. This is attributed in both cases to the increasing hydrophobic interaction between polymer and surfactant. Among surfactants with monovalent halide counterions, iodide induces the strongest binding, reflected by the onset of growth of the mixed aggregates at low surfactant concentration. This is perhaps related to the decreasing hydration of the counterion from chloride to iodide. The surfactant concentration at which the viscosity of the solution starts to decrease sharply is smaller than the CAC, and probably reflects polymer chain shrinkage due to noncooperative binding.