Graft copolymerization of acrylamide onto a polyethylene surface pretreated with glow discharge

Graft polymerization from a silica surface initiated by adsorbed peroxide macroinitiators. I. Adsorption and structure of the adsorbed layer of peroxide macroinitiators on a silica surface

The adsorption features of two peroxide macroinitiators (PMIs) with various functionalities from their semi-dilute solutions on the silica surface were thoroughly investigated in the present work. These investigations include the study of the adsorption kinetics of PMI in diverse solvents and a detailed examination of the adsorbed layer structure with the aid of ellipsometry, scanning force microscopy (SFM), and contact angle measurements. Rearrangements of PMI macromolecules at the solid surface are supposed to be the main reason for the appearance of extremes on the kinetic curves and, besides, have a more pronounceable effect on adsorption rate than their diffusion rate to the surface even at the initial stage of the process. Both island-like and densely packed structures of absorbed layers were revealed by combining contact angle measurements and SFM. Surprisingly, even in the case when saturation of the adsorbed layer is reached, PMI does not completely occupy the substrate surface which is at least particularly reachable for the wetting liquids. PMIs adsorbed at the solid surface are intended for the formation of tethered polymer "brushes" via the initiation of "grafting from" polymerization.

Surface modification and functionalization through the self-assembled monolayer and graft polymerization

The modification of a surface at the molecular level with precise control of the building blocks generates an integrated molecular system. This field has progressed rapidly in recent years through the use of self-assembled monolayer (SAM) interfaces. Recent developments on surface-initiated chemical reactions, functionalization, and graft polymerization on SAM interfaces are emphasized in the present review. A number of surface modifications by grafting are reviewed. The grafting of polyaniline on a glass surface, previously modified with a silane self-assembled monolayer (SAM), is examined in detail for both planar and 3-D systems, such as fibers, nanoparticles, and even polymer patterned surfaces. We also discuss the graft polymerization of water-soluble polymers on the surface of silicon nanoparticles, which generate stable aqueous colloidal solutions and have numerous applications. Finally, we compare and review some surface-modification techniques on the surfaces of polymers, such as two-solvent entrapment, polymer blending, and chemical grafting, which improve their biocompatibility.

Surface modification of ultra thin poly (ε-caprolactone) films using acrylic acid and collagen

Poly (epsilon-caprolactone) (PCL) has been used as a bioresorbable polymer in numerous medical devices as well as for tissue engineering applications. Its main advantage is its biocompatibility and slow degradation rate. PCL surface, however, is hydrophobic and cell-biomaterial interaction is not the best. We attempt for the first time to modify an ultra thin PCL surface with collagen. The PCL film was prepared using solvent casting and biaxial stretching technique developed in our laboratory. This biaxial stretching produced an ultra thin PCL 3-7 microm thick, ideal for membrane tissue engineering applications. The PCL film was pretreated using Argon plasma, and then UV polymerized with acrylic acid (AAc). Collagen immobilization was then carried out. The modified film surface was characterized by Fourier Transform Infrared (FT-IR) and X-ray Photoelectron Spectroscopy (XPS). Water contact angles were also measured to evaluate the hydrophilicity of the modified surface. Results showed that the hydrophilicity of the surface has improved significantly after surface modification. The water contact angle dropped from 66 degrees to 32 degrees. Atomic Force Microscopy (AFM) showed an increase in roughness of the film. A change from 46 to 60 nm in the surface morphology was also observed. The effect of cells attachment on the PCL film was studied. Human dermal fibroblasts and myoblasts attachment and proliferation were improved remarkably on the modified surface. The films showed excellent cell attachment and proliferation rate.

Antibacterial activity of cloth functionalized with N-alkylated poly(4-vinylpyridine)

A simple technique was developed to functionalize the surface of commercial cotton cloth with bactericidal polycationic groups. The cloth was first graft copolymerized with 4-vinylpyridine (4VP) and subsequently derivatized with hexylbromide via the quaternization of the grafted pyridine groups into pyridinium groups. X-ray photoelectron spectroscopy (XPS) was used to characterize the cotton cloth after each surface functionalization step. The pyridinium groups introduced on the substrate surface exhibited a high bacterial killing efficiency as shown by airborne and waterborne Escherichia coli (E. coli) assays, as well as a test to measure the number of viable E. coli cells in suspension upon contact with the cloth. This antibacterial property is preserved even after the cloth is subjected to prolonged weathering under UV irradiation and water spray. Wild-type bacteria were also cultured from soil and used to verify the antibacterial potential of the functionalized cloth. The inhibition of biofilm formation on the functionalized cloth was observed even with the inoculation of high concentrations of microorganisms. The success of the present surface functionalization technique as applied to cloth is a promising development, as since cloth is a common material having wide applications.

Physicochemical and blood compatibility characterization of polypyrrole surface functionalized with heparin

A surface modification technique was developed for the covalent immobilization of heparin onto electrically conductive polypyrrole (PPY) film. The PPY film was first graft copolymerized with poly(ethylene glycol) methacrylate (PEGMA) and then activated with cyanuric chloride (CC). Heparin was then immobilized onto the film through the reaction between the chloride groups of CC and the amine and/or hydroxyl groups of heparin. X-ray photoelectron spectroscopy (XPS) was used to characterize the surface-modified film after each stage. The biocompatibility of the surface-modified PPY was evaluated using plasma recalcification time (PRT) and platelet adhesion. After surface modification, the film had improved wettability while retaining significant electrical conductivity. With immobilized heparin, platelet adhesion and platelet activation on PPY film was significantly suppressed, and the PRT was significantly prolonged. Electrical stimulation also plays a positive role in decreasing platelet adhesion and increasing PRT on pristine and surface-modified PPY films.

Grafting sulfobetaine monomer onto the segmented poly(ether-urethane) surface to improve hemocompatibility

Polyurethanes are widely used as blood-contacting biomaterials, due to their good biocompatibility and mechanical properties. Nevertheless, their blood compatibility is still not adequate for more demanding applications. Surface modification is an effective way to improve the hemocompatibility for biomaterials. The purpose of the present study was to synthesize a novel nonthrombogenic biomaterial by modifying the surface of polyurethane. Ozonization was used to introduce active peroxide groups onto the segmented poly(ether-urethane) (SPEU) film surface and graft polymerization of N,N'-dimethyl (methacryloyloxyethyl) ammonium propanesulfonate (DMAPS), a sulfobetaine structure, onto the ozone-activated SPEU surface was conducted. The SPEU-g-PDMAPS film was characterized by ATR-FTIR, XPS, and contact angle measurements. ATR-FTIR and XPS confirmed the graft polymerization. The grafted film possessed a relatively hydrophilic surface, as revealed by contact angle measurement. The blood compatibility of the grafted films was evaluated by a platelet-rich plasma (PRP) adhesion study and scanning electron microscopy, using SPEU film as the reference. No platelet adhesion was observed for the grafted films incubated with PRP at 37 degrees C for 60 and 180 min. This new sulfobetaine structure grafted biomaterial might have potential for biomedical applications.

XPS, AES, and AFM as tools for study of optimized plasma functionalization

The plasma-based surface modification of polymer materials with desirable bulk properties is a useful way to obtain polymers with tailor-made surface properties. This is necessary because the surface properties of most engineering polymers in use today are less then optimum for many applications. New functionalities such as biocompatibility, adhesion, special functional groups as well as lubricative, friction and wear-and-tear properties are demanded. By optimization of the process parameters during a low pressure plasma treatment, most of these requirements can be fulfilled. A specific functionalization with, e.g., carboxyl, amino, epoxy or hydroxyl groups as well as the generation of ultra thin layers with those functionalities is possible. The most challenging problem is not only to find parameters which do not lead to a fragmentation of the monomeric structure, but moreover the adhesion of the thin films to the substrates must overcome a stability test without delamination. To optimize plasma processes, with their great variety of parameters influencing the obtained surface properties, several surface analytical techniques are indispensable. XPS, AES as well as AFM are helpful tools to characterize the modified sample surfaces and consequently optimize the set of parameters for the glow discharge treatment. With XPS the retention of the monomer structure can be controlled. AES depth profiling clarifies the elemental composition of gradient layers, necessary for a good adhesion of scratch-resistant coatings. AFM visualizes the surface morphology which is important for, e.g., the friction properties of plasma-coated substrates.

The effect of surface wettability on induction and growth of neurites from the PC-12 cell on a polymer surface

Surface properties of polymeric devices that are used to regenerate nervous damage are a point to be considered for axon regeneration in nerve system. In our previous studies, we prepared a wettability gradient on polyethylene (PE) surfaces using a corona discharge treatment from a knife-type electrode whose power increases gradually along the sample length. The PE surfaces were oxidized gradually with increasing power. The effect of surface wettability on the different types of cells has an important role for cell adhesion and proliferation. The purpose of this study is to investigate neurite formation on polymer surfaces with different wettability. Induction and growth of neurites from the rat pheochromocytoma (PC-12) cells attached on the polymer surfaces with different hydrophilicity were investigated using the wettability gradient PE surfaces prepared by a corona discharge treatment. Neurites were investigated for number and length of neurites in terms of surface wettability. It was observed that neurite formation of PC-12 cells was increased more onto the positions with moderate hydrophilicity of the wettability gradient surface than onto the more hydrophobic or hydrophilic positions. From those results, it could be assumed that initial adhesion of PC-12 cells was caused by more calf serum (CS) protein than nerve growth factor (NGF), whereas the neurite formation of PC-12 cells was caused by more NGF than CS protein. It follows from what has been said thus far that PC-12 cells are a differentiated neuronal phenotype with a long neurite at around the position 2.5 cm (water contact angle of about 55 deg). In conclusion, surface wettability plays an important role for neurite formation on the polymer surfaces for axon regeneration.

Immobilization of galactose ligands on acrylic acid graft-copolymerized poly(ethylene terephthalate) film and its application to hepatocyte culture

Surface modification of argon-plasma-pretreated poly(ethylene terephthalate) (PET) films via UV-induced graft copolymerization with acrylic acid (AAc) was carried out. Galactosylated surfaces were then obtained by coupling a galactose derivative (1-O-(6'-aminohexyl)-D-galactopyranoside) to the AAc graft chains with the aid of a water-soluble carbodiimide (WSC) and N-hydroxysulfosuccinimide (sulfo-NHS). The modified PET films were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact-angle measurements. The galactosylated PET films were used as substrates for hepatocyte culture. The effects of surface carboxyl group concentration on the extent of galactose ligand immobilization, the extent of hepatocyte attachment, and the surface morphology were investigated. The amount of the galactose ligands immobilized on the PET surface increased with the AAc polymer graft concentration. AFM images revealed that the surface roughness of the PET film increased after graft copolymerization with AAc, but did not change appreciably with the subsequent immobilization of the galactose ligands. At the surface carboxyl group concentration of about 0.56 micromol/cm(2) or galactose ligand concentration of about 0.51 micromol/cm(2), the hepatocyte culture on the galactosylated surface exhibited the optimum concentration and physiological functions and formed aggregates or spheroids after just 1 day of culture. The albumin and urea synthesis functions of these hepatocytes were comparable to or higher than those of the hepatocytes cultured on the collagen-modified PET substrates.

Tailor-made functional surfaces: potential elastomeric biomaterials I

In the present investigation, different functional monomers, like hydroxyethyl methacrylate, acrylic acid, N-vinyl pyrrolidone and glycidyl methacrylate, have been grafted onto the surface of EPDM film (approx. 200 microm) using simultaneous photo-grafting (lambda > or = 290 nm) and cold plasma-grafting techniques, to alter the surface properties, such as hydrophilicity and, therefore, biocompatibility. Here, we have carried out simultaneous plasma-grafting, unlike the conventional post plasma-grafting. The effect of different surface grafting techniques on the degree of surface modification and resultant biocompatibility has been investigated. The chemical changes on the polymer backbone are followed from the results of attenuated total reflection Fourier transform infrared (ATR-FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS), which shows the peaks corresponding to the functional groups of the monomers grafted onto the film surface. The morphology of the modified surfaces was investigated using scanning electron microscopy (SEM) technique. The induced hydrophilicity and resultant cell compatibility were followed from the water contact angle measurements and in vitro human carcinoma cell adhesion/proliferation tests, respectively. All the grafted samples exhibited variable cell compatibilities depending upon the type of monomer and their degree of grafting; however, always better than the neat samples. Hydroxyethyl methacrylate and acrylic acid showed exceptionally high cell compatibility in terms of cell adhesion and proliferation.

High density binding of proteins and peptides to poly(D,L-lactide) grafted with polyacrylic acid

The use of graft polymers for the functionalisation of biomaterial surfaces is already widespread. We investigated the adsorptive and covalent binding of a variety of proteins and peptides to poly(D,L-lactide) grafted with polyacrylic acid. Covalent attachment was achieved through coupling of amino groups of the protein/peptide to the carboxyl groups of the graft polymer by using a water-soluble carbodiimide and N-hydroxysuccinimide. Binding densities were determined by automated amino acid analysis after acid hydrolysis of both the poly(D,L-lactide) and the adsorbed and covalently bound proteins. Experiments in the absence and presence of the coupling reagents allow to discriminate between adsorptive and covalent binding. Although the adsorptivc binding is quite substantial in absolute terms, the amount of adsorbed protein is relatively low as compared to the total amount of bound protein. Total binding densities of 20-30 microg/cm2 can easily be achieved. Depending on the concentration and on the properties of the proteins and peptides, between 5% and 80% of the totally bound protein may be physically adsorbed. Densities expressed in molecules/10 nm2 vary from 0.5 molecule fibronectin to 2,000 laminin-peptide molecules: their binding densities clearly correlate with their respective molecular masses. Obviously, the binding densities are governed by their individual three-dimensional space requirements rather than the density of the available carboxyl groups. From the number of carboxyl groups/10 nm2 (18,000-30,000 COOH/10 nm2) the average length of the acrylic acid graft polymer molecules was estimated. Based on the assumption that about 10 copolymer chains can be accommodated on 10 nm2, the average length of the polymer chains, which corresponds to the thickness of the graft phase, is estimated to be 0.5-1 microm. The organisation of the proteins and peptides within the polyacrylic acid phase was further investigated by experiments in which a protein (BSA) and a peptide (Val-Lys) were allowed to react in either a singular, a consecutive or a simultaneous way. Together with XPS and IR-ATR surface characterisation experiments a three-dimensional picture of the arrangement of the immobilised proteins and peptides within the graft polymer phase emerges.

Development of a molecular recognition ion gating membrane and estimation of its pore size control

We have fabricated a molecular recognition ion gating membrane. This synthetic membrane spontaneously opens and closes its pores in response to specific solvated ions. In addition to this switching function, we found that this membrane could control its pore size in response to a known concentration of a specific ion. The membrane was prepared by plasma graft copolymerization, which filled the pores of porous polyethylene film with a copolymer of NIPAM (N-isopropylacrylamide) and BCAm (benzo[18]crown-6-acrylamide). NIPAM is well-known to have an LCST (lower critical solution temperature), at which its volume changes dramatically in water. The crown receptor of the BCAm traps a specific ion, and causes a shift in the LCST. Therefore, selectively responding to either K(+) or Ba(2+), the grafted copolymer swelled and shrank in the pores at a constant temperature between two LCSTs. The solution flux in the absence of Ba(2+) decreased by about 2 orders of magnitude over a solution flux containing Ba(2+). The pore size was estimated by the filtration of aqueous dextran solutions with various solute sizes. This revealed that the membrane changed its pore size between 5 and 27 nm in response to the Ba(2+) concentration changes. No such change was observed for Ca(2+) solutions. Furthermore, this pore size change occurred uniformly in all pores, as a clear cut-off value for a solute size that could pass through pores was always present. This membrane may be useful not only as a molecular recognition ion gate, but also as a device for spontaneously controlling the permeation flux and solute size.

Strong Adhesion and Smooth Conductive Surface via Graft Polymerization of Aniline on a Modified Glass Fiber Surface

The goal of this paper is to prepare surface-conductive glass fibers. The fibers were first hydroxylated, after which they were reacted with 3-bromopropyltrichlorosilane to form a bromopropylsilane monolayer, which was further reacted with aniline to substitute the bromine atoms. The surface-bound aniline molecules were used as active sites for the graft polymerization of polyaniline (PANI). The composition, structure and the morphology of the modified glass fiber surface were examined by X-ray photoelectron spectroscopy, scanning electron microscopy, and Fourier transform infrared spectroscopy. The method generated a smooth and homogenous thin layer of PANI on the surface of the glass fiber with a surface conductivity of about 6 S/cm, hence larger than the usual value ( approximately 1 S/cm) of the bulk polyaniline.

Modification of gold surface by grafting of poly(ethylene glycol) for reduction in protein adsorption and platelet adhesion

Gold surfaces were first treated in an alkanethiol solution to form self-assembled monolayers (SAMs). The thiolated Au surface was then subjected to Ar plasma pretreatment, followed by air exposure and UV-induced graft polymerization of poly(ethylene glycol) methacrylate (PEGMA) macromonomer. In comparison with the 3-mercaptopropionic acid-2-ethylhexyl ester (MPAEE) SAM, the (3-mercaptoproply)trimethoxysilane (MPTMS) SAM on Au exhibited higher stability under the conditions of Ar plasma pretreatment. The graft concentration of the PEGMA polymer on SAM-modified Au surface increased with increasing PEGMA macromonomer concentration and UV-graft polymerization time. The modified-Au surfaces were characterized by X-ray spectroscopy (XPS), atomic force microscopy (AFM), and water contact angle measurement. The Au surface with a high concentration of grafted PEGMA polymer could completely repel protein adsorption and platelet adhesion.

Immobilization of poly(ethylene glycol) or its sulfonate onto polymer surfaces by ozone oxidation

A novel surface modification method has been developed to improve biocompatibility of polymeric biomaterials. This approach involves ozonation and then followed by graft polymerization with acrylates containing PEG, sulfonated PEG or by coupling of PEG derivatives. All the reactions were confirmed by ATR FT-IR and ESCA. The degree of ozonation measured by the iodide method was dependent on the ozone permeability of the polymers used. Surface hydrophilicity was investigated by measuring the contact angles. Ozonation itself yielded a slight increase in hydrophilicity and a decrease in platelet adhesion, but PEG immobilization showed a significant effect on surface hydrophilicity and platelet adhesion to confirm well-known PEG's passivity which minimize the adhesion of blood components on polymer surfaces. Both graft polymerization and coupling were effective for PU. In contrast, only grafting gave enough yields for PMMA and silicone. Platelet adhesion results demonstrated that all PEG modified surfaces adsorbed lower platelet adhesion than untreated or ozonated ones. Polymers coupled with sulfonated PEG exhibited the lowest platelet adhesion when compared with control and PEG coupled ones by virtue of the synergistic effect of non-adhesive PEG and negatively charged SO3 groups. This PEG or sulfonated PEG immobilization technology using ozonation is relatively simple for introducing uniform surface modification and therefore very useful for practical application of blood contacting medical devices.

In vitro evaluation of the heparin-coated Gyro C1E3 blood pump

The blood-contacting surface, mainly composed of polycarbonate, of the Gyro C1E3 pump was modified using plasma glow discharge to introduce a carboxyl functional group, coated with a base layer of polyethyleneimine as a linker, and coupled with heparin by multi-ionic binding to enhance blood compatibility. A relative surface content of 3.7% sulfur, which demonstrated heparin immobilization on the polycarbonate substrate, was observed on x-ray photoelectron spectroscopy, and a initial bioactivity of approximately 88.5 +/- 7.3 mIU/cm2 was obtained by the chromogenic method for antifactor Xa assay. Furthermore, in vitro observation of platelet and fibrin adherence using bovine blood under dynamic flow conditions for 6 h revealed that the multi-ionically heparinized Gyro C1E3 had significantly stronger antithrombogenecity than the noncoated original type which was evaluated as a good hemocompatible blood pump for clinical use. Not only the Gyro C1E3 but also the ionically heparin-coated Gyro pump are expected to be thromboresistant in clinical use.

Surface modification of stainless steel by grafting of poly(ethylene glycol) for reduction in protein adsorption

The surface of stainless steel was first modified by the silane coupling agent (SCA), (3-mercaptopropyl)trimethoxysilane. The silanized stainless-steel surface (SCA-SS surface) was subsequently activated by argon plasma and then subjected to UV-induced graft polymerization of poly(ethylene glycol)methacrylate (PEGMA). The chemical structures and composition of the pristine, silane-treated, plasma-treated and PEGMA graft-polymerized stainless-steel coupon surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. The graft polymerization of PEGMA onto the plasma-pretreated SCA-SS surface was studied with different argon plasma pretreatment time, macromonomer concentration, and UV graft polymerization time. In general, a brief plasma pretreatment, high PEGMA concentration, and long UV graft polymerization time readily resulted in a high graft concentration. The PEGMA graft-polymerized stainless-steel coupon (PEGMA-g-SCA-SS) with a high graft concentration, and thus a high PEG content, was found to be very effective in preventing bovine serum albumin and gamma-globulin adsorption.

Surface photo-grafting of polyurethane with 2-hydroxyethyl acrylate for promotion of human endothelial cell adhesion and growth

Cytocompatible polyurethane (PU) surface was prepared by photo-grafting 2-hydroxyethyl acrylate (HEA) onto the membrane surface. Graft polymerization was conducted by combining the use of the photo-oxidation and irradiation grafting. PU membrane was photo-oxidized to introduce the hydroperoxide groups onto the surface, then the membrane, immersed previously in monomer solution, was irradiated under UV light. The ATR-FTIR spectra, element spectroscopy for chemical analysis (ESCA), scanning electron microscopy (SEM) and water contact angle characterized the grafted copolymers and verified the occurrence of graft polymerization. The results showed that UV irradiation could realize the graft polymerization effectively and the grafting was confined within the surface layer. The grafted membrane showed minimal surface morphology. Human umbilical vein endothelial (HUVE) cells were seeded on the grafted surface. The performance of the surface in cell attachment and growth correlated with the oxygen content and mainly the carbonyl content on the surface. Cells were spread more extensively and grew faster on the surface with a higher oxygen content.