Nanoporous gold supported cobalt oxide microelectrodes as high-performance electrochemical biosensors

3D nanoporous gold scaffold supported on graphene paper: Freestanding and flexible electrode with high loading of ultrafine PtCo alloy nanoparticles for electrochemical glucose sensing

Recent advances in on-body wearable medical apparatus and implantable devices drive the development of light-weight and bendable electrochemical sensors, which require the design of high-performance flexible electrode system. In this work, we reported a new type of freestanding and flexible electrode based on graphene paper (GP) supported 3D monolithic nanoporous gold (NPG) scaffold (NPG/GP), which was further modified by a layer of highly dense, well dispersed and ultrafine binary PtCo alloy nanoparticles via a facile and effective ultrasonic electrodeposition method. Our results demonstrated that benefited from the synergistic effect of the electrocatalytically active PtCo alloy nanoparticles, the large-active-area and highly conductive 3D NPG scaffold, and the mechanically strong and stable GP electrode substrate, the resultant PtCo alloy nanoparticles modified NPG/GP (PtCo/NPG/GP) exhibited high mechanical strength and good electrochemical sensing performances toward nonenzymatic detection of glucose, including a wide linear range from 35 μM- to 30 mM, a low detection limit of 5 μM (S/N = 3) and a high sensitivity of 7.84 μA cm(-2) mM(-1) as well as good selectivity, long-term stability and reproducibility. The practical application of the proposed PtCo/NPG/GP has also been demonstrated in in vitro detection of blood glucose in real clinic samples.

Flexible Molybdenum Electrodes towards Designing Affinity Based Protein Biosensors

Molybdenum electrode based flexible biosensor on porous polyamide substrates has been fabricated and tested for its functionality as a protein affinity based biosensor. The biosensor performance was evaluated using a key cardiac biomarker; cardiac Troponin-I (cTnI). Molybdenum is a transition metal and demonstrates electrochemical behavior upon interaction with an electrolyte. We have leveraged this property of molybdenum for designing an affinity based biosensor using electrochemical impedance spectroscopy. We have evaluated the feasibility of detection of cTnI in phosphate-buffered saline (PBS) and human serum (HS) by measuring impedance changes over a frequency window from 100 mHz to 1 MHz. Increasing changes to the measured impedance was correlated to the increased dose of cTnI molecules binding to the cTnI antibody functionalized molybdenum surface. We achieved cTnI detection limit of 10 pg/mL in PBS and 1 ng/mL in HS medium. The use of flexible substrates for designing the biosensor demonstrates promise for integration with a large-scale batch manufacturing process.

Selectable Ultrasensitive Detection of Hg(2+) with Rhodamine 6G-Modified Nanoporous Gold Optical Sensor

An extremely sensitive fluorescence sensor has been developed for selectively detection of mercury ions based on metallophilic Hg(2+)-Au(+) interactions, which results in an effective release of pre-adsorbed rhodamine 6G (R6G) molecules from the nanoporous gold substrate, associated with a significant decrease of fluorescence intensity. The optical sensor has a detection sensitivity down to 0.6 pM for Hg(2+) and CH3Hg(+) ions, in particular a superior selectivity in a complex aqueous system containing 13 different types of metal ions, meanwhile maintaining a long-term stability after 10 cycles. Such a fluorescence sensor combining multiple advantages therefore present promising potentials in various applications.

Genetically Engineered Phage-Templated MnO2 Nanowires: Synthesis and Their Application in Electrochemical Glucose Biosensor Operated at Neutral pH Condition

To conveniently obtain one-dimensional MnO2 nanowires (NWs) with controlled structure and unique properties for electron transfer, the genetically engineered M13 phages were used as templates for precise nucleation and growth of MnO2 crystals in filamentous phage scaffolds, via the spontaneous oxidation of Mn(2+) in alkaline solution. It was found that the morphology of NWs could be tailored by the surface charge of M13 mutants. MnO2 crystals were uniformly distributed on the surface of negatively charged tetraglutamate-fused phage (M13-E4), significantly different from irregular MnO2 agglomeration on the weakly negatively charged wild-type phage and positively charged tetraarginine-fused phage. The as-synthesized M13-E4@MnO2 NWs could catalyze the electro-oxidation of H2O2 at neutral pH. To demonstrate the superiority of the electrocatalytic activity in the solution containing plenty of chloride ions at neutral pH, both glucose oxidase and as-prepared MnO2 NWs were used for fabricating the glucose biosensor. The proposed biosensor showed a wide linear range (5 μM to 2 mM glucose), a low limit of detection of 1.8 μM glucose (S/N = 3), good interassay and intra-assay reproducibility and satisfactory storage stability. Due to the superiorities of synthesis and electrochemical performance, the as-prepared MnO2 NWs are promising for applications in electrocatalysis, electrochemical sensor, and supercapacitor.

Ultrahigh-Power Pseudocapacitors Based on Ordered Porous Heterostructures of Electron-Correlated Oxides

Nanostructured transition-metal oxides can store high-density energy in fast surface redox reactions, but their poor conductivity causes remarkable reductions in the energy storage of most pseudocapacitors at high power delivery (fast charge/discharge rates). Here it is shown that electron-correlated oxide hybrid electrodes made of nanocrystalline vanadium sesquioxide and manganese dioxide with 3D and bicontinuous nanoporous architecture (NP V2O3/MnO2) have enhanced conductivity because of metallization of electron-correlated V2O3 skeleton via insulator-to-metal transition. The conductive V2O3 skeleton at ambient temperature enables fast electron and ion transports in the entire electrode and facilitates charge transfer at abundant V2O3/MnO2 interface. These merits significantly improve the pseudocapacitive behavior and rate capability of the constituent MnO2. Symmetric pseudocapacitors assembled with binder-free NP V2O3/MnO2 electrodes deliver ultrahigh electrical powers (up to ≈422 W cm23) while maintaining the high volumetric energy of thin-film lithium battery with excellent stability.

Carbon Monoxide-Assisted Synthesis of Ultrathin PtCu3 Alloy Wavy Nanowires and Their Enhanced Electrocatalysis

Glucose sensing that is not influenced by the presence of chloride, uric acid, ascorbic acid and dopamine is achieved on ultrathin PtCu3 alloy wavy nanowires (WNWs). These WNWs are synthesized by a facile, one-pot, templateless hydrothermal method in an atmosphere of CO, which is critical to the formation process. Their structural properties, including the abundance of twinning defects, make the as-prepared PtCu3 WNWs excellent electrocatalysts for methanol oxidation as well as great sensors for glucose.

NiCo alloy nanoparticles anchored on polypyrrole/reduced graphene oxide nanocomposites for nonenzymatic glucose sensing

The combination of PPy and graphene oxide was used as an effective supporting substrate for the loading of alloys.

Advances in non-enzymatic glucose sensors based on metal oxides

This review summarizes the advances in non-enzymatic glucose sensors based on different metal oxides (ZnO, CuO/Cu₂O, NiO,etc.) and their composites.

A versatile sol–gel coating for mixed oxides on nanoporous gold and their application in the water gas shift reaction

Ceria–titania mixed oxides on a structured nanoporous gold support result in highly active and durable catalysts for the water-gas shift reaction.

High performance Cu/Cu2O nanohybrid electrocatalyst for nonenzymatic glucose detection

Described herein are Cu/Cu₂O nanohybrids preparedviapotential oscillation, and their high performance for nonenzymatic glucose detection applications.

Fast synthesis of platinum nanopetals and nanospheres for highly-sensitive non-enzymatic detection of glucose and selective sensing of ions

Novel methods to obtain Pt nanostructured electrodes have raised particular interest due to their high performance in electrochemistry. Several nanostructuration methods proposed in the literature use costly and bulky equipment or are time-consuming due to the numerous steps they involve. Here, Pt nanostructures were produced for the first time by one-step template-free electrodeposition on Pt bare electrodes. The change in size and shape of the nanostructures is proven to be dependent on the deposition parameters and on the ratio between sulphuric acid and chloride-complexes (i.e., hexachloroplatinate or tetrachloroplatinate). To further improve the electrochemical properties of electrodes, depositions of Pt nanostructures on previously synthesised Pt nanostructures are also performed. The electroactive surface areas exhibit a two order of magnitude improvement when Pt nanostructures with the smallest size are used. All the biosensors based on Pt nanostructures and immobilised glucose oxidase display higher sensitivity as compared to bare Pt electrodes. Pt nanostructures retained an excellent electrocatalytic activity towards the direct oxidation of glucose. Finally, the nanodeposits were proven to be an excellent solid contact for ion measurements, significantly improving the time-stability of the potential. The use of these new nanostructured coatings in electrochemical sensors opens new perspectives for multipanel monitoring of human metabolism.

Three-Dimensional Cu Foam-Supported Single Crystalline Mesoporous Cu2O Nanothorn Arrays for Ultra-Highly Sensitive and Efficient Nonenzymatic Detection of Glucose

Highly sensitive and efficient biosensors play a crucial role in clinical, environmental, industrial, and agricultural applications, and tremendous efforts have been dedicated to advanced electrode materials with superior electrochemical activities and low cost. Here, we report a three-dimensional binder-free Cu foam-supported Cu2O nanothorn array electrode developed via facile electrochemistry. The nanothorns growing in situ along the specific direction of <011> have single crystalline features and a mesoporous surface. When being used as a potential biosensor for nonenzyme glucose detection, the hybrid electrode exhibits multistage linear detection ranges with ultrahigh sensitivities (maximum of 97.9 mA mM(-1) cm(-2)) and an ultralow detection limit of 5 nM. Furthermore, the electrode presents outstanding selectivity and stability toward glucose detection. The distinguished performances endow this novel electrode with powerful reliability for analyzing human serum samples. These unprecedented sensing characteristics could be ascribed to the synergistic action of superior electrochemical catalytic activity of nanothorn arrays with dramatically enhanced surface area and intimate contact between the active material (Cu2O) and current collector (Cu foam), concurrently supplying good conductivity for electron/ion transport during glucose biosensing. Significantly, our findings could guide the fabrication of new metal oxide nanostructures with well-organized morphologies and unique properties as well as low materials cost.

CuO nanowire/microflower/nanowire modified Cu electrode with enhanced electrochemical performance for non-enzymatic glucose sensing

CuO nanowire/microflower structure on Cu foil is synthesized by annealing a Cu(OH)2 nanowire/CuO microflower structure at 250 °C in air. The nanowire/microflower structure with its large surface area leads to an efficient catalysis and charge transfer in glucose detection, achieving a high sensitivity of 1943 μA mM(-1) cm(-2), a wide linear range up to 4 mM and a low detection limit of 4 μM for amperometric glucose sensing in alkaline solution. With a second consecutive growth of CuO nanowires on the microflowers, the sensitivity of the obtained CuO nanowire/microflower/nanowire structure further increases to 2424 μA mM(-1) cm(-2), benefiting from an increased number of electrochemically active sites. The enhanced electrocatalytic performance of the CuO nanowire/microflower/nanowire electrode compared to the CuO nanowire/microflower electrode, CuO nanowire electrode and CuxO film electrode provides evidence for the significant role of available surface area for electrocatalysis. The rational combination of CuO nanowire and microflower nanostructures into a nanowire supporting microflower branching nanowires structure makes it a promising composite nanostructure for use in CuO based electrochemical sensors with promising analytical properties.

Nickel-Cobalt Double Hydroxide Decorated Carbon Nanotubes via Aqueous Electrophoretic Deposition towards Catalytic Glucose Detection

In this work, we present a facile technique based on electrophoretic deposition (EPD) to produce transition metal hydroxide decorated carbon nanotubes (CNT) for electrochemical applications. We specifically explore the performance of nickel-cobalt hydroxides given their high activity, conductivity and stability as compared to the individual hydroxides. We exploit the high local pH at the negative electrodes during water-based EPD to form nanoparticles of nickel-cobalt hydroxides in situ on the CNT surface. We focus our work here on obtaining functional and conductive deposits on CNTs. The hydrophilic binderless deposits of Ni-Co double hydroxide decorated CNTs obtained here are used for non-enzymatic glucose detection. XPS data and electrochemical testing reveal difference in the deposited double hydroxide based on chronology of charging salt addition even at the same ratio. When cobalt and nickel salts are sequentially added at a ratio of 1:1, the deposited double hydroxides show excellent glucose sensitivity of ~3300μA/mM.cm2 at applied potential of 0.55V vs. Ag/AgCl reference electrode.

Rational design of binder-free noble metal/metal oxide arrays with nanocauliflower structure for wide linear range nonenzymatic glucose detection

One-dimensional nanocomposites of metal-oxide and noble metal were expected to present superior performance for nonenzymatic glucose detection due to its good conductivity and high catalytic activity inherited from noble metal and metal oxide respectively. As a proof of concept, we synthesized gold and copper oxide (Au/CuO) composite with unique one-dimensional nanocauliflowers structure. Due to the nature of the synthesis method, no any foreign binder was needed in keeping either Au or CuO in place. To the best of our knowledge, this is the first attempt in combining metal oxide and noble metal in a binder-free style for fabricating nonenzymatic glucose sensor. The Au/CuO nanocauliflowers with large electrochemical active surface and high electrolyte contact area would promise a wide linear range and high sensitive detection of glucose with good stability and reproducibility due to its good electrical conductivity of Au and high electrocatalytic activity of CuO.

A Versatile Environmental Impedimetric Sensor for Ultrasensitive Determination of Persistent Organic Pollutants (POPs) and Highly Toxic Inorganic Ions

An impedimetric sensor for persistent toxic substances, including organic pollutants and toxic inorganic ions is presented. The persistent toxic substances are detected using an ultrasensitive technique that is based on electron-transfer blockage. This depends on the formation of guest-host complexes, hydrogen bonding, or a cyclodextrin (CD)-metal complex (M_m(OH)_n-β-CD) structure between the target pollutants and β-CD.

Dealloying of Cu-Based Metallic Glasses in Acidic Solutions: Products and Energy Storage Applications

Dealloying, a famous ancient etching technique, was used to produce nanoporous metals decades ago. With the development of dealloying techniques and theories, various interesting dealloying products including nanoporous metals/alloys, metal oxides and composites, which exhibit excellent catalytic, optical and sensing performance, have been developed in recent years. As a result, the research on dealloying products is of great importance for developing new materials with superior physical and chemical properties. In this paper, typical dealloying products from Cu-based metallic glasses after dealloying in hydrofluoric acid and hydrochloric acid solutions are summarized. Several potential application fields of these dealloying products are discussed. A promising application of nanoporous Cu (NPC) and NPC-contained composites related to the energy storage field is introduced. It is expected that more promising dealloying products could be developed for practical energy storage applications.

Electrochemical synthesis of mesoporous gold films toward mesospace-stimulated optical properties

Mesoporous gold (Au) films with tunable pores are expected to provide fascinating optical properties stimulated by the mesospaces, but they have not been realized yet because of the difficulty of controlling the Au crystal growth. Here, we report a reliable soft-templating method to fabricate mesoporous Au films using stable micelles of diblock copolymers, with electrochemical deposition advantageous for precise control of Au crystal growth. Strong field enhancement takes place around the center of the uniform mesopores as well as on the walls between the pores, leading to the enhanced light scattering as well as surface-enhanced Raman scattering (SERS), which is understandable, for example, from Babinet principles applied for the reverse system of nanoparticle ensembles.

Rapid, sensitive, and reusable detection of glucose by a robust radiofrequency integrated passive device biosensor chip

Tremendous demands for sensitive and reliable label-free biosensors have stimulated intensive research into developing miniaturized radiofrequency resonators for a wide range of biomedical applications. Here, we report the development of a robust, reusable radiofrequency resonator based integrated passive device biosensor chip fabricated on a gallium arsenide substrate for the detection of glucose in water-glucose solutions and sera. As a result of the highly concentrated electromagnetic energy between the two divisions of an intertwined spiral inductor coupled with an interdigital capacitor, the proposed glucose biosensor chip exhibits linear detection ranges with high sensitivity at center frequency. This biosensor, which has a sensitivity of up to 199 MHz/mgmL⁻¹ and a short response time of less than 2 sec, exhibited an ultralow detection limit of 0.033 μM and a reproducibility of 0.61% relative standard deviation. In addition, the quantities derived from the measured S-parameters, such as the propagation constant (γ), impedance (Z), resistance (R), inductance (L), conductance (G) and capacitance (C), enabled the effective multi-dimensional detection of glucose.

Nanoporous CuO layer modified Cu electrode for high performance enzymatic and non-enzymatic glucose sensing

Nanoporous CuO layer on Cu foil with a thick Cu2O interlayer is synthesized via post annealing of previously fabricated Cu(OH)2 nanowires at 500 °C under an oxygen flow. The formation of the thick sandwiched Cu2O layer is realized through the outward diffusion of Cu ions and subsequent oxidation. An O2 pressure above the dissociation pressure of CuO is used to form a CuO layer at the outer surface of the structure, thus realizing a low cost structure having a porous and high isoelectric point layer. The Cu/Cu2O/CuO structure is used as an efficient electrode for glucose sensing. Sensitivities of [Formula: see text] at 0.8 V versus Ag/AgCl and 1066 μA mM(-1) cm(-2) at 0.6 V versus Ag/AgCl are achieved in an enzymatic and non-enzymatic glucose sensing schemes, respectively. The improved electrochemical sensing ability might be attributed to the efficient electrocatalytic reaction on the high crystal quality CuO layer and the porous structure.

Large-scale fabrication of porous bulk silver thin sheets with tunable porosity for high-performance binder-free supercapacitor electrodes

We report a novel method for the large-scale fabrication of porous bulk silver thin sheets (PSTS) built from three-dimensionally interconnected nanoparticles (NPs).

Real-time monitoring of H2O2 release from single cells using nanoporous gold microelectrodes decorated with platinum nanoparticles

We present a self-supported nanoporous gold/PtNPs microelectrode with the sub-nanomolar sensitivity to detect H₂O₂ release from single cells.

Design and development of Co3O4/NiO composite nanofibers for the application of highly sensitive and selective non-enzymatic glucose sensors

Cobaltosic oxide/nickel oxide (Co₃O₄/NiO) composite nanofibers were synthesizedviaan electrospinning technique and their electrocatalytic activities toward non-enzymatic glucose sensors were evaluated in detail.

A strategy for fabricating nanoporous gold films through chemical dealloying of electrochemically deposited Au-Sn alloys

We report a novel strategy for the fabrication of nanoporous gold (NPG) films. The fabrication process involves the electrodeposition of a gold-tin alloy, followed by subsequent chemical dealloying of tin. Scanning electron microscopy (SEM) images show a bicontinuous nanoporous structure formed on the substrates after chemical dealloying. Energy dispersive x-ray (EDX) analysis indicates that there are no impurities in the Au-Sn alloy film with an average composition of 58 at. % Au and 42 at. % Sn. After dealloying, only gold remains in the NPG film indicating the effectiveness of this technique. X-ray diffraction (XRD) results reveal that the as-prepared Au-Sn alloy film is composed of two phases (Au5Sn and AuSn), while the NPG film is composed of a single phase (Au). We demonstrate that this approach enables the fabrication of NPG films, either freestanding or supported on various conductive substrates such as copper foil, stainless steel sheet and nickel foam. The resulting NPG electrode exhibits enhanced electrocatalytic activity toward both H2O2 reduction and methanol oxidation compared to the polished Au disc electrode. Our strategy provides a general method to fabricate high quality NPG films on conductive substrates, which will broaden the application potential of NPG or NPG-based materials in various fields such as catalysis, optics and sensor technology.

Self-grown Ni(OH)(2) layer on bimodal nanoporous AuNi alloys for enhanced electrocatalytic activity and stability

Au nanostructures as catalysts toward electrooxidation of small molecules generally suffer from ultralow surface adsorption capability and stability. Here, we report Ni(OH)2 layer decorated nanoporous (NP) AuNi alloys with a three-dimensional and bimodal porous architecture, which are facilely fabricated by a combination of chemical dealloying and in situ surface segregation, for the enhanced electrocatalytic performance in biosensors. As a result of the self-grown Ni(OH)2 on the AuNi alloys with a coherent interface, which not only enhances adsorption energy of Au and electron transfer of AuNi/Ni(OH)2 but also prohibits the surface diffusion of Au atoms, the NP composites are enlisted to exhibit significant enhancement in both electrocatalytic activity and stability toward glucose electrooxidation. The highly reliable glucose biosensing with exceptional reproducibility and selectivity as well as quick response makes it a promising candidate as electrode materials for the application in nonenzymatic glucose biosensors.

Electrospun doping of carbon nanotubes and platinum nanoparticles into the β-phase polyvinylidene difluoride nanofibrous membrane for biosensor and catalysis applications

A novel β-phase polyvinylidene difluoride (PVDF) nanofibrous membrane decorated with multiwalled carbon nanotubes (MWCNTs) and platinum nanoparticles (PtNPs) was fabricated by an improved electrospinning technique. The morphology of the fabricated PVDF-MWCNT-PtNP nanofibrous membrane was observed by scanning electron microscopy, and the formation of high β-phase in the hybrid nanofibrous membrane was investigated by Fourier transform infrared spectroscopy and differential scanning calorimetry. The uniform dispersion of MWCNTs and PtNPs in the PVDF hybrid nanofibrous membrane and their interaction were explored by transmission electron microscopy and X-ray diffraction. For the first time, we utilized this created PVDF-MWCNT-PtNP nanofibrous membrane for biosensor and catalysis applications. The nonenzymatic amperometric biosensor with highly stable and sensitive, and selective detection of both H2O2 and glucose was successfully fabricated based on the electrospun PVDF-MWCNT-PtNP nanofibrous membrane. In addition, the catalysis of the hybrid nanofibrous membrane for oxygen reduction reaction was tested, and a good catalysis performance was found. We anticipate that the strategies utilized in this work will not only guide the further design of functional nanofiber-based biomaterials and biodevices but also extend the potential applications in energy storage, cytology, and tissue engineering.

PdO doping tunes band-gap energy levels as well as oxidative stress responses to a Co₃O₄ p-type semiconductor in cells and the lung

We demonstrate through PdO doping that creation of heterojunctions on Co₃O₄ nanoparticles can quantitatively adjust band-gap and Fermi energy levels to study the impact of metal oxide nanoparticle semiconductor properties on cellular redox homeostasis and hazard potential. Flame spray pyrolysis (FSP) was used to synthesize a nanoparticle library in which the gradual increase in the PdO content (0–8.9%) allowed electron transfer from Co₃O₄ to PdO to align Fermi energy levels across the heterojunctions. This alignment was accompanied by free hole accumulation at the Co₃O₄ interface and production of hydroxyl radicals. Interestingly, there was no concomitant superoxide generation, which could reflect the hole dominance of a p-type semiconductor. Although the electron flux across the heterojunctions induced upward band bending, the E_c levels of the doped particles showed energy overlap with the biological redox potential (BRP). This allows electron capture from the redox couples that maintain the BRP from −4.12 to −4.84 eV, causing disruption of cellular redox homeostasis and induction of oxidative stress. PdO/Co₃O₄ nanoparticles showed significant increases in cytotoxicity at 25, 50, 100, and 200 μg/mL, which was enhanced incrementally by PdO doping in BEAS-2B and RAW 264.7 cells. Oxidative stress presented as a tiered cellular response involving superoxide generation, glutathione depletion, cytokine production, and cytotoxicity in epithelial and macrophage cell lines. A progressive series of acute pro-inflammatory effects could also be seen in the lungs of animals exposed to incremental PdO-doped particles. All considered, generation of a combinatorial PdO/Co₃O₄ nanoparticle library with incremental heterojunction density allowed us to demonstrate the integrated role of E_v, E_c, and E_f levels in the generation of oxidant injury and inflammation by the p-type semiconductor, Co₃O₄.

ZnO nanowire arrays on 3D hierachical graphene foam: biomarker detection of Parkinson's disease

We report that vertically aligned ZnO nanowire arrays (ZnO NWAs) were fabricated on 3D graphene foam (GF) and used to selectively detect uric acid (UA), dopamine (DA), and ascorbic acid (AA) by a differential pulse voltammetry method. The optimized ZnO NWA/GF electrode provided a high surface area and high selectivity with a detection limit of 1 nM for UA and DA. The high selectivity in the oxidation potential was explained by the gap difference between the lowest unoccupied and highest occupied molecular orbitals of a biomolecule for a set of given electrodes. This method was further used to detect UA levels in the serum of patients with Parkinson's disease (PD). The UA level was 25% lower in PD patients than in healthy individuals. This finding strongly implies that UA can be used as a biomarker for PD.

Fabrication of magneto-controlled moveable architecture to develop reusable electrochemical biosensors

Electrochemical biosensors have been studied intensively for several decades. Numerous sensing concepts and related interface architectures have been developed. However, all such architectures suffer a trade-off: simple architectures favour usability, whereas complex architectures favour better performance. To overcome this problem, we propose a novel concept by introducing a magneto-controlled moveable architecture (MCMA) instead of the conventional surface-fixed architecture. As a model, human breast cancer cells were used in this study. The results showed that a detection range from 100 to 1 × 10⁶ cells could be achieved. Moreover, the whole detection cycle, including the measurement and the regeneration, could be completed in only 2 min. Thus, usability and excellent performance can be achieved in a single biosensor.