Solid-phase synthesis of molecularly imprinted nanoparticles

Imprinted Polymers as Synthetic Receptors in Sensors for Food Safety

Foodborne illnesses represent high costs worldwide in terms of medical care and productivity. To ensure safety along the food chain, technologies that help to monitor and improve food preservation have emerged in a multidisciplinary context. These technologies focus on the detection and/or removal of either biological (e.g., bacteria, virus, etc.) or chemical (e.g., drugs and pesticides) safety hazards. Imprinted polymers are synthetic receptors able of recognizing both chemical and biological contaminants. While numerous reviews have focused on the use of these robust materials in extraction and separation applications, little bibliography summarizes the research that has been performed on their coupling to sensing platforms for food safety. The aim of this work is therefore to fill this gap and highlight the multidisciplinary aspects involved in the application of imprinting technology in the whole value chain ranging from IP preparation to integrated sensor systems for the specific recognition and quantification of chemical and microbiological contaminants in food samples.

Rational Design of Molecularly Imprinted Polymers Using Quaternary Ammonium Cations for Glyphosate Detection

Molecularly imprinted polymers have emerged as cost-effective and rugged artificial selective sorbents for combination with different sensors. In this study, quaternary ammonium cations, as functional monomers, were systematically evaluated to design imprinted polymers for glyphosate as an important model compound for electrically charged and highly water-soluble chemical compounds. To this aim, a small pool of monomers were used including (3-acrylamidopropyl)trimethylammonium chloride, [2-(acryloyloxy)ethyl]trimethylammonium chloride, and diallyldimethylammonium chloride. The simultaneous interactions between three positively charged monomers and glyphosate were preliminary evaluated using statistical design of the experiment method. Afterwards, different polymers were synthesized at the gold surface of the quartz crystal microbalance sensor using optimized and not optimized glyphosate-monomers ratios. All synthesized polymers were characterized using atomic force microscopy, contact angle, Fourier-transform infrared, and X-ray photoelectron spectroscopy. Evaluated functional monomers showed promise as highly efficient functional monomers, when they are used together and at the optimized ratio, as predicted by the statistical method. Obtained results from the modified sensors were used to develop a simple model describing the binding characteristics at the surface of the different synthesized polymers. This model helps to develop new synthesis strategies for rational design of the highly selective imprinted polymers and to use as a sensing platform for water soluble and polar targets.

Hybrid aptamer-molecularly imprinted polymer (AptaMIP) nanoparticles selective for the antibiotic moxifloxacin

A polymerisable aptamer incorporated into Molecularly Imprinted Polymer nanoparticles (MIPs) creates a hybrid “best-of-both-worlds” approach which outperforms individual constituent components.

Generation of High-Affinity Aptamer-MIP Hybrid Nanoparticles

Aptamers and molecularly imprinted polymers (MIPs) are two leading technologies used for the development of protein biomimetics. By combining the two technologies, a new hybrid class of materials can be created, which utilizes the interesting characteristics of both recognition materials, while negating several of their drawbacks. This chapter describes the protocol for the synthesis of aptamer-MIP hybrid nanoparticles. These materials exhibit exceptional affinity (into the nM range) and selectivity for their target template. They can be developed for a wide range of targets, while exhibiting excellent robustness, solubility, and flexibility in use. These are a new class of recognition materials with the potential for use as drug delivery vectors, as well as use within sensing and recognition assays.

MIPs for commercial application in low-cost sensors and assays - An overview of the current status quo

Molecularly imprinted polymers (MIPs) have emerged over the past few decades as interesting synthetic alternatives due to their long-term chemical and physical stability and low-cost synthesis procedure. They have been integrated into many sensing platforms and assay formats for the detection of various targets, ranging from small molecules to macromolecular entities such as pathogens and whole cells. Despite the advantages MIPs have over natural receptors in terms of commercialization, the striking success stories of biosensor applications such as the glucose meter or the self-test for pregnancy have not been matched by MIP-based sensor or detection kits yet. In this review, we zoom in on the commercial potential of MIP technology and aim to summarize the latest developments in their commercialization and integration into sensors and assays with high commercial potential. We will also analyze which bottlenecks are inflicting with commercialization and how recent advances in commercial MIP synthesis could overcome these obstacles in order for MIPs to truly achieve their commercial potential in the near future.

Efficient Screening of Glycan-Specific Aptamers Using a Glycosylated Peptide as a Scaffold

Abnormal glycan structures are valuable biomarkers for disease states; the development of glycan-specific binders is thereby significantly important. However, the structural homology and weak immunogenicity of glycans pose major hurdles in the evolution of antibodies, while the poor availability of complex glycans also has extremely hindered the selection of anti-glycan aptamers. Herein, we present a new approach to efficiently screen aptamers toward specific glycans with a complex structure, using a glycosylated peptide as a scaffold. In this method, using peptide-imprinted magnetic nanoparticles (MNPs) as a versatile platform, a glycopeptide tryptically digested from a native glycoprotein was selectively entrapped for positive selection, while a nonglycosylated analogue with an identical peptide sequence was synthesized for negative selection. Alternating positive and negative selection steps were carried out to guide the directed evolution of glycan-binding aptamers. As proof of the principle, the biantennary digalactosylated disialylated N-glycan A2G2S2, against which there have been no antibodies and lectins so far, was employed as the target. With the glycoprotein transferrin as a source of target glycan, two satisfied anti-A2G2S2 aptamers were selected within seven rounds. Since A2G2S2 is upregulated in cancerous liver cells, carboxyfluorescein (FAM)-labeled aptamers were prepared as fluorescent imaging reagents, and successful differentiation of cancerous liver cells over normal liver cells was achieved, which demonstrated the application feasibility of the selected aptamers. This approach obviated a tedious glycan preparation process and allowed favorable expose of the intrinsic flexible conformation of natural glycans. Therefore, it holds great promise for developing glycan-specific aptamers for challenging applications such as cancer targeting.

NMR Spectroscopy of supramolecular chemistry on protein surfaces

As one of the few analytical methods that offer atomic resolution, NMR spectroscopy is a valuable tool to study the interaction of proteins with their interaction partners, both biomolecules and synthetic ligands. In recent years, the focus in chemistry has kept expanding from targeting small binding pockets in proteins to recognizing patches on protein surfaces, mostly via supramolecular chemistry, with the goal to modulate protein–protein interactions. Here we present NMR methods that have been applied to characterize these molecular interactions and discuss the challenges of this endeavor.

Development of a NanoMIPs-SPR-Based Sensor for β-Lactoglobulin Detection

Food manufacturers are aiming to manage the levels of cross-contamination of allergens within food processing plants and ultimately move away from precautionary labelling. Hence, the need for rapid methods to detect allergens cross-contamination. A sensitive and selective label-free nanoMIPs based sensor was developed and tested for the detection of β-lactoglobulin (BLG). NanoMIPs were synthesized using solid-phase synthesis and appeared as spherical nanoparticles with sizes ranging from 264–294 nm, using dynamic light scattering (DLS). The nanoMIPs were functionalized with amine groups and attached to the surface of the SPR gold chip via amine-coupling protocol. The SPR nanoMIPs-based sensor demonstrated a detection limit of 3 ng mL−1 (211 pM) over a linear range of 1–5000 ng mL−1, with binding affinity of 7.0 × 10−8 M and specificity towards BLG. With further testing and final optimization, the developed nanosensor can be integrated on-line or at-line cleaning-in-place (CIP) wash systems, allowing to effectively monitor milk protein allergens as a rapid, point-of-source methodology.

Molecular Imprinted Polymers Coupled to Photonic Structures in Biosensors: The State of Art

Optical sensing, taking advantage of the variety of available optical structures, is a rapidly expanding area. Over recent years, whispering gallery mode resonators, photonic crystals, optical waveguides, optical fibers and surface plasmon resonance have been exploited to devise different optical sensing configurations. In the present review, we report on the state of the art of optical sensing devices based on the aforementioned optical structures and on synthetic receptors prepared by means of the molecular imprinting technology. Molecularly imprinted polymers (MIPs) are polymeric receptors, cheap and robust, with high affinity and selectivity, prepared by a template assisted synthesis. The state of the art of the MIP functionalized optical structures is critically discussed, highlighting the key progresses that enabled the achievement of improved sensing performances, the merits and the limits both in MIP synthetic strategies and in MIP coupling.

Epitope-Imprinted Magnetic Nanoparticles as a General Platform for Efficient In Vitro Evolution of Protein-Binding Aptamers

Aptamers are usually created by in vitro selection using a strategy termed systematic evolution of ligands by exponential enrichment (SELEX). Although numerous SELEX alternatives with improved selection efficiency have been developed, the overall success rate of SELEX at present is still not very ideal, which remains a great obstacle to aptamer-based research and application. In this study, an efficient and facile SELEX method was developed for in vitro screening of protein-binding aptamers, applying epitope-imprinted magnetic nanoparticles (MNPs) that exhibit highly favorable binding properties as a general affinity platform. As a proof of the principle, myoglobin (Mb) and β₂-microglobulin were employed as two target proteins. Two satisfied aptamers toward each target protein, with the dissociation constant at the 10^-8 M level and cross-reactivity less than 16.5%, were selected within three rounds, taking only 1 day. A dual aptamer-based fluorescence sandwich assay was constructed using a pair of the selected aptamers. The resulting assay allowed for quantitatively detecting Mb in human serum and distinguishing acute myocardial infarction patients from healthy individuals. The epitope-imprinted MNP-based SELEX is straightforward and generally applicable for a wide range of target proteins, providing a promising aptamer selection tool for aptamer-based research and real-world applications.

Molecularly Imprinted Polymers: Antibody Mimics for Bioimaging and Therapy

Molecularly imprinted polymers (MIPs) are tailor-made chemical receptors that recognize and bind target molecules with a high affinity and selectivity. MIPs came into the spotlight in 1993 when they were dubbed "antibody mimics," and ever since, they have been widely studied for the extraction or trapping of chemical pollutants, in immunoassays, and for the design of sensors. Owing to novel synthesis strategies resulting in more biocompatible MIPs in the form of soluble nanogels, these synthetic antibodies have found favor in the biomedical domain since 2010, when for the first time, they were shown to capture and eliminate a toxin in live mice. This review, covering the years 2015-2020, will first describe the rationale behind these antibody mimics, and the different synthesis methods that have been employed for the preparation of MIPs destined for in vitro and in vivo targeting and bioimaging of cancer biomarkers, an emerging and fast-growing area of MIP applications. MIPs have been synthesized for targeting and visualizing glycans and protein-based cell receptors overexpressed in certain diseases, which are well-known biomarkers for example for tumors. When loaded with drugs, the MIPs could locally kill the tumor cells, making them efficient therapeutic agents. We will end the review by reporting how MIPs themselves can act as therapeutics by inhibiting cancer growth. These works mark a new opening in the use of MIPs for antibody therapy and even immunotherapy, as materials of the future in nanomedicine.

Thermistors coated with molecularly imprinted nanoparticles for the electrical detection of peptides and proteins

In this communication, molecularly imprinted nanoparticles (nanoMIPs) that are produced by solid-phase synthesis are functionalised onto thermistors via dip-coating. These thermistors are soldered onto a printed-circuit board to facilitate electrical detection. Subsequently, these are inserted into a home-made thermal device that can measure the selective binding of biomolecules to the nanoMIP layer via monitoring the thermal resistance (R_th) at the solid-liquid interface. This thermal analysis technique, referred to as the Heat-Transfer Method, has previously been used for detection of proteins with MIP-based binders. While offering the advantages of low-cost and label free analysis, this method is limited by the high noise on the feedback loop and not being commercially available. These disadvantages can be overcome by the use of thermistors, which offer superior temperature sensitivity compared to thermocouples, and its electrical read-out can be easily integrated into portable devices. To our knowledge, this is the first report where MIPs are directly integrated onto thermistors for detection purposes. Measurements were conducted with an epitope of epidermal growth factor receptor (EGFR) and trypsin, where the electrical resistance was correlated to the biomolecule concentration. For both EGFR and trypsin, an enhanced signal to noise ratio for the electrical measurements was observed compared to previous analysis that was based on thermal resistance. The sensitivity of the sensors in buffered solution was in the nanomolar range, which is compatible with physiologically relevant concentrations. Upon exposure of the nanoMIP for EGFR towards pepsin no significant change in the resistance was yielded, establishing the selectivity of the developed sensor platform. Besides the enhanced sensitivity, the use of thermistors will enable miniaturisation of the device and has potential for in vivo measurements since specified electrochemical measurements are compatible with human use. To highlight the versatility of the nanoMIPs, this work should be extended to a set of biomolecules with various structures, with the possibility of extending this to an array format.

Highly selective electrochemical nanofilm sensor for detection of carcinogenic PAHs in environmental samples

A highly sensitive sensor based on molecularly imprinted polymer film was devised for determination of polycyclic aromatic hydrocarbon (PAHs) in aquatic solutions. In this paper we report, electro-polymerisation of 4-vinyl pyridine (4VP) and target, pyrene, using cyclic voltammeter in electrolyte medium, forming the pyrene imprinted polymer. After polymerisation, the pyrene was removed from imprinted polymer using methanol to produce sensory nanofilm characterised by infrared spectrometer, optical and atomic force microscopy. The mechanism of nanofilm sensing was established using atomic models and electrochemical response by differential pulse voltammeter with the redox system of ([Fe(CN)₆]^3-/[Fe(CN)₆]^4-). The π-π interaction between pyrene and 4VP was primary cause for pyrene recognition in aqueous solutions and the model binding score for this interaction was -5.10 kcal mol^-1. The electrochemical sensor determined pyrene in the concentration range of 1 × 10^-4 - 1 ng L^-1, resulting best linear regression (r² > 0.9) and detection limit of 0.001 ng L^-1. The recovery percentage of pyrene from the nanofilm was 83-110% in water samples and the imprinting factor value was 2.67. Therefore, the novel imprinted polymer nanofilm sensor showed highest sensitivity for target pyrene in aqueous samples compared to reported sensors.

Molecularly imprinted polymers-A closer look at the control polymer used in determining the imprinting effect: A mini review

Molecular recognition displayed by naturally occurring receptors has continued to inspire new innovations aimed at developing systems that can mimic this natural phenomenon. Since 1930s, a technology called molecular imprinting for producing biomimetic receptors has been in place. In this technology, tailor made binding sites that selectively bind a given target analyte (also called template) are incorporated in a polymer matrix by polymerizing functional monomers and cross-linking monomers around a target analyte followed by removal of the analyte to leave behind cavities specific to the analyte. The success of the imprinting process is defined by two main figures of merit, that is, the imprinting factor, and selectivity, which are determined by comparing the amount of target analyte or structural analogue bound by the molecularly imprinted polymer (MIP) and the nonimprinted polymer (NIP). NIP is a control synthesized alongside the MIP but in the absence of the template. However, questions arise on whether these figures of merit are reliable measures of the imprinting effect because of the significant differences between the MIP and the NIP in terms of their physical and chemical characteristics. Therefore, this review critically looks into this subject, with a view of defining the best approaches for determining the imprinting effect.

Convenient Construction of Orthogonal Dual Aptamer-Based Plasmonic Immunosandwich Assay for Probing Protein Disease Markers in Complex Samples and Living Animals

Aptamers, because of their outstanding merits including simple synthesis and easy modification, have been widely used as antibody alternatives to construct novel immunosandwich assays. Dual aptamer-based sandwich assays exhibit multiple advantages over conventional immunosandwich assays and single aptamer-based sandwich assays. However, their construction is hampered by the limited knowledge of binding orthogonality of aptamers reported in the literature. Herein, we present a new strategy for conveniently constructing an orthogonal dual aptamer-based plasmonic immunosandwich assay (odA-PISA) for probing proteins in complex samples and living animals. An orthogonal aptamer pair was first efficiently selected from the aptamers reported in the literature by affinity capillary electrophoresis. Then, a target protein-capturing gold thin-layer-coated probe and silver nanoparticle-based Raman labeling nanotags were conveniently prepared with the selected aptamers and used to construct the assay. The double aptamers used ensured the specificity, whereas the plasmonic coupling effect between the target-capturing probe and the generated Raman nanotags significantly enhanced the Raman signal intensity, providing high sensitivity. As a proof of principle, alkaline phosphatase (ALP) was used as the target. The constructed odA-PISA exhibited high specificity and high sensitivity toward ALP, giving cross-reactivity ≤ 4.2% and the limit of detection of 3.8 pM (S/N = 4). The quantitative determination of ALP in human serum and probing ALP in tumor-bearing mice were achieved, showing the great application potential of the method. This strategy is widely applicable to other protein disease markers. Therefore, it opened a new access to the construction of sensitive dual aptamer-based sandwich assays for real-world applications, particularly disease diagnosis.

The Use of Aptamers and Molecularly Imprinted Polymers in Biosensors for Environmental Monitoring: A Tale of Two Receptors

Effective molecular recognition remains a major challenge in the development of robust receptors for biosensing applications. Over the last three decades, aptamers and molecularly imprinted polymers (MIPs) have emerged as the receptors of choice for use in biosensors as viable alternatives to natural antibodies, due to their superior stability, comparable binding performance, and lower costs. Although both of these technologies have been developed in parallel, they both suffer from their own unique problems. In this review, we will compare and contrast both types of receptor, with a focus on the area of environmental monitoring. Firstly, we will discuss the strategies and challenges involved in their development. We will also discuss the challenges that are involved in interfacing them with the biosensors. We will then compare and contrast their performance with a focus on their use in the detection of environmental contaminants, namely, antibiotics, pesticides, heavy metals, and pathogens detection. Finally, we will discuss the future direction of these two technologies.

Optical fiber sensors for monitoring in critical care

Monitoring of key physiological and pharmacological parameters is an important part of a closed loop control system in critical care. Optical fiber sensors provide a versatile platform technology that can be easily incorporated into existing in-dwelling catheters or face masks. With appropriate functional coatings they can be used to monitor a range of relevant parameters and two different examples are presented: (i) respiration monitoring; (ii) drug level monitoring. Respiration monitoring involves monitoring of temperature and humidity in inhaled and exhaled breath. The optical fiber sensor consists of a fiber Bragg grating to measure temperature and a tip coating whose refractive index changes with humidity. The sensor is demonstrated to be able to track breath to breath changes when incorporated into a mask. Drug level monitoring is demonstrated in vitro using a long period grating coated with molecularly imprinted polymer nanoparticles that are sensitive to fentanyl. The sensor has a limit of detection of 50ng/ml.

Molecularly Imprinted Nanoparticles Based Sensor for Cocaine Detection

The development of a sensor based on molecularly imprinted polymer nanoparticles (nanoMIPs) and electrochemical impedance spectroscopy (EIS) for the detection of trace levels of cocaine is described in this paper. NanoMIPs for cocaine detection, synthesized using a solid phase, were applied as the sensing element. The nanoMIPs were first characterized by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering and found to be ~148.35 ± 24.69 nm in size, using TEM. The nanoMIPs were then covalently attached to gold screen-printed electrodes and a cocaine direct binding assay was developed and optimized, using EIS as the sensing principle. EIS was recorded at a potential of 0.12 V over the frequency range from 0.1 Hz to 50 kHz, with a modulation voltage of 10 mV. The nanoMIPs sensor was able to detect cocaine in a linear range between 100 pg mL-1 and 50 ng mL-1 (R2 = 0.984; p-value = 0.00001) and with a limit of detection of 0.24 ng mL-1 (0.70 nM). The sensor showed no cross-reactivity toward morphine and a negligible response toward levamisole after optimizing the sensor surface blocking and assay conditions. The developed sensor has the potential to offer a highly sensitive, portable and cost-effective method for cocaine detection.

Deformable molecularly imprinted nanogels permit sensitivity-gain in plasmonic sensing

Soft molecularly imprinted nanogels (nanoMIPs), selective for human transferrin (HTR), were prepared via a template assisted synthesis. Owing to their soft matter, the nanoMIPs were observed to deform at binding to HTR: while no relevant changes were observed in the hydrodynamic sizes of HTR-free compared to HTR-loaded nanoMIPs, the HTR binding resulted in a significant increment of the nanoMIP stiffness, with the mean Young's modulus measured by AFM passing from 17 ± 6 kPa to 56 ± 18 kPa. When coupled to a plastic optical fibre (POF) plasmonic platform, the analyte-induced nanoMIP-deformations amplified the resonance shift, enabling to attain ultra-low sensitivities (LOD = 1.2 fM; linear dynamic range of concentrations from 1.2 fM to 1.8 pM). Therefore, soft molecularly imprinted nanogels that obey to analyte-induced deformation stand as a novel class of sensitivity-gain structures for plasmonic sensing.

Probing Peptide Sequences on Their Ability to Generate Affinity Sites in Molecularly Imprinted Polymers

An array of 4000 defined and addressable tripeptides on a polymer-coated glass slide is used to synthesize molecularly imprinted polymer (MIP) nanoparticles. This work is undertaken to systematically probe the impact of the peptide sequence on the ability to generate affinity MIPs. The polymer affinity is assessed by measuring the fluorescence of bound MIP nanoparticles at each peptide spot on the surface after washing the array to remove any low-affinity polymer. The generic composition commonly used in the preparation of MIPs against proteins seems to be equally suitable for imprinting hydrophobic and hydrophilic tripeptides. The amino acids frequently contributing to the formation of high-affinity MIPs include T, F, D, N, Y, W, and P. The amino acids that rarely contribute to the formation of high-affinity interactions with MIPs are G, V, A, L, I, and M. These observations are confirmed by computational modeling. The basic technique proposed here may be applicable in optimizing polymer compositions for the production of high-affinity MIPs or, more specifically, for the selection of appropriate amino acid sequences when peptide epitopes are used instead of whole protein imprinting.

Molecularly imprinted nanoparticles-based assay (MINA) – detection of leukotrienes and insulin

A novel molecularly imprinted polymer nanoparticle-based assay (MINA) performed in magnetic microplates was developed as an improved high-quality alternative to existing antibody-based immunoassays.

Effect of polymerisation by microwave on the physical properties of molecularly imprinted polymers (MIPs) specific for caffeine

Synthesis of Molecularly Imprinted Polymers by microwave irradiation is significantly affected by applied power.

Towards Peptide and Protein Recognition by Antibody Mimicking Synthetic Polymers – Background, State of the Art, and Future Outlook

Antibody–peptide/protein interactions are instrumental for many processes in the pharmaceutical and biotechnology industries and as tools for biomedical and biochemical research. The recent development of molecularly imprinted polymer nanoparticles displaying antibody-like recognition of peptides and proteins offers the possibility for substituting antibodies with these robust materials for applications where the structural integrity and function of antibodies is compromised by temperature, pH, solvent, etc. The background to the development of this class of antibody-mimicking material and the state-of-the-art in their synthesis and application is presented in this review.

Molecularly Imprinted Nanoparticles for Biomedical Applications

Molecularly imprinted polymers (MIPs) are synthetic receptors with tailor-made recognition sites for target molecules. Their high affinity and selectivity, excellent stability, easy preparation, and low cost make them promising substitutes to biological receptors in many applications where molecular recognition is important. In particular, spherical MIP nanoparticles (or nanoMIPs) with diameters typically below 200 nm have drawn great attention because of their high surface-area-to-volume ratio, easy removal of templates, rapid binding kinetics, good dispersion and handling ability, undemanding functionalization and surface modification, and their high compatibility with various nanodevices and in vivo biomedical applications. Recent years have witnessed significant progress made in the preparation of advanced functional nanoMIPs, which has eventually led to the rapid expansion of the MIP applications from the traditional separation and catalysis fields to the burgeoning biomedical areas. Here, a comprehensive overview of key recent advances made in the preparation of nanoMIPs and their important biomedical applications (including immunoassays, drug delivery, bioimaging, and biomimetic nanomedicine) is presented. The pros and cons of each synthetic strategy for nanoMIPs and their biomedical applications are discussed and the present challenges and future perspectives of the biomedical applications of nanoMIPs are also highlighted.

High salt compatible oxyanion receptors by dual ion imprinting

Imprinting of an ion-pair in presence of mutually compatible anion and cation host monomers leads to polymers showing enhanced ion uptake in competitive high ionic strength buffers.

Strategies for Molecular Imprinting and the Evolution of MIP Nanoparticles as Plastic Antibodies-Synthesis and Applications

Materials that can mimic the molecular recognition-based functions found in biology are a significant goal for science and technology. Molecular imprinting is a technology that addresses this challenge by providing polymeric materials with antibody-like recognition characteristics. Recently, significant progress has been achieved in solving many of the practical problems traditionally associated with molecularly imprinted polymers (MIPs), such as difficulties with imprinting of proteins, poor compatibility with aqueous environments, template leakage, and the presence of heterogeneous populations of binding sites in the polymers that contribute to high levels of non-specific binding. This success is closely related to the technology-driven shift in MIP research from traditional bulk polymer formats into the nanomaterial domain. The aim of this article is to throw light on recent developments in this field and to present a critical discussion of the current state of molecular imprinting and its potential in real world applications.

NanoMIP-based approach for the suppression of interference signals in electrochemical sensors

Herein, we describe the use of molecularly imprinted nanoparticles (nanoMIPs) as sequestering (masking) agents, to suppress the signal coming from interfering molecules and facilitate the detection of the target analyte. In this work, ascorbic acid was used as a model interfering molecule in dopamine electrochemical detection. NanoMIPs selective for ascorbic acid demonstrated to be capable of binding and suppressing electrochemical signal from ascorbic acid, enabling the detection of dopamine in the range 100-500 nM, without any need for sample pre-treatment. Tests in real samples (spiked human serum) were also carried out successfully. Due to the generic nature of the imprinting process, the proposed approach can be tailored to suppress potentially any interfering species, by simply varying the type of nanoMIPs used.

Epitope Imprinting Technology: Progress, Applications, and Perspectives toward Artificial Antibodies

Epitope imprinting is a promising tool to generate antibody-like specific recognition sites. Recently, because of the ease of obtaining templates, the flexibility in selecting monomers, their resistance to harsh environments, and the high specificity toward targets, epitope-imprinted materials have attracted much attention in various fields, such as bioanalysis, clinical therapy, and pharmacy. Here, the discussion is focused on the current representative epitope imprinting technologies, including epitope bulk imprinting and epitope surface imprinting. Moreover, the application of epitope-imprinted materials to the recognition of peptides, proteins, and cells is reviewed. Finally, the remaining challenges arising from the intrinsic properties of epitope imprinting are discussed, and future development in the field is prospected.

Integrating ionic liquids with molecular imprinting technology for biorecognition and biosensing: A review

As promising alternatives to natural receptors, artificial molecularly imprinted polymers (MIPs) have received great attention in biotechnology. Nevertheless, some bottlenecks limit their further development, including low adsorption capacity, poor recognition efficiency, slow response, and insipid aqueous compatibility. Ionic liquids (ILs) show the features of tailored structures and properties, high conductivity, good solubility, and excellent stability. Because of these advantages, they have found intensive use in MIPs by remedying the latter's shortcomings. In this review, we summarize the integration of ILs and MIPs for biorecognition and biosensing. The versatile roles of ILs in improving the performance of MIPs are firstly summarized, including serving as solvents, porogens, functional monomers, organic surface modifiers, dummy templates, and cross-linkers. Then, specific applications of IL-based MIPs in peptide recognition, protein sensing, and food safety analysis are discussed. Finally, future trends and challenges for the design and development of IL-based MIPs and their applications in the biorecognition and biosensing are proposed.

Molecularly Imprinted Polymers for Cell Recognition

Since their conception 50 years ago, molecularly imprinted polymers (MIPs) have seen extensive development both in terms of synthetic routes and applications. Cells are perhaps the most challenging target for molecular imprinting. Although early work was based almost entirely around microprinting methods, recent developments have shifted towards epitope imprinting to generate MIP nanoparticles (NPs). Simultaneously, the development of techniques such as solid phase MIP synthesis has solved many historic issues of MIP production. This review briefly describes various approaches used in cell imprinting with a focus on applications of the created materials in imaging, drug delivery, diagnostics, and tissue engineering.

Thermal Detection of Cardiac Biomarkers Heart-Fatty Acid Binding Protein and ST2 Using a Molecularly Imprinted Nanoparticle-Based Multiplex Sensor Platform

This manuscript describes the production of molecularly imprinted polymer nanoparticles (nanoMIPs) for the cardiac biomarkers heart-fatty acid binding protein (H-FABP) and ST2 by solid-phase synthesis, and their use as synthetic antibodies in a multiplexed sensing platform. Analysis by surface plasmon resonance (SPR) shows that the affinity of the nanoMIPs is similar to that of commercially available antibodies. The particles are coated onto the surface of thermocouples and inserted into 3D-printed flow cells of different multiplexed designs. We demonstrate that it is possible to selectively detect both cardiac biomarkers within the physiologically relevant range. Furthermore, the developed sensor platform is the first example of a multiplex format of this thermal analysis technique which enables simultaneous measurements of two different compounds with minimal cross selectivity. The format where three thermocouples are positioned in parallel exhibits the highest sensitivity, which is explained by modeling the heat flow distribution within the flow cell. This design is used in further experiments and proof-of-application of the sensor platform is provided by measuring spiked fetal bovine serum samples. Because of the high selectivity, short measurement time, and low cost of this array format, it provides an interesting alternative to traditional immunoassays. The use of nanoMIPs enables a multimarker strategy, which has the potential to contribute to sustainable healthcare by improving the reliability of cardiac biomarker testing.

Effects of nano-confinement and conformational mobility on molecular imprinting of cross-linked micelles

Molecular imprinting is a facile method to create guest-complementary binding sites in a cross-linked polymeric network. When performed within cross-linked micelles, the resulting molecularly imprinted nanoparticles (MINPs) exhibited an extraordinary ability to distinguish subtle structural changes in the guest, including the shift of a hydrophilic or hydrophobic group by 1 carbon and addition of a single methylene/methyl group. A high surface-cross-linking density prior to core-cross-linking was key to the high-fidelity imprinting, enhancing both the binding affinity of the imprinted micelle for the template and selectivity among structural analogues. Whereas the imprinted site closely complemented the hydrophilic surface anchoring group and rigid hydrophobic aromatic core, it was expanded significantly for a conformationally mobile small group (i.e., methoxy).

Optimisation of the preservation conditions for molecularly imprinted polymer nanoparticles specific for trypsin

The influence of lyophilisation, autoclaving and sonication on the stability and performance of trypsin-specific molecularly imprinted polymer nanoparticles (MIP NPs) has been studied in order to improve their long-term physical stability. Glucose, glycine, sorbitol and trehalose were tested as cryoprotectant agents during the lyophilisation treatment. The effect of lyophilisation and sterilisation on affinity of trypsin-specific NPs was assessed using Biacore 3000 instrument. The results have demonstrated that MIP NPs successfully withstood the lyophilisation and autoclaving conditions without a reduction of their recognition properties and affinity. It is possible to conclude that both tested lyophilisation and sterilisation treatments were suitable for a long-term storage of the prepared MIP NPs and could be used to store MIP NPs in dry state and hence reduce the chance of the bacterial contamination. An effective preservation of the MIP NPs is a crucial requirement for their future applications in the clinical diagnostics and bioimaging.

Competitive pseudo-ELISA based on molecularly imprinted nanoparticles for microcystin-LR detection in water

Microcystins (MCs) are dangerous cyanotoxins for the public health, and microcystin-LR (MC-LR) is one of most toxic, dangerous, and frequently found in water bodies. Typically, the detection of MCs is carried out by means of competitive ELISAs which, however, need special precautions for handling and storage, due to the stability of the antibodies used in this test. Molecularly imprinted nanoparticles (nanoMIPs) represents more robust and cost-effective alternative to antibodies. In this work, we developed a competitive pseudo-ELISA based on nanoMIPs (which are used in place of natural antibodies), for the detection of microcystin-LR (MC-LR). This pseudo-ELISA showed a linear response towards MC-LR, showing high affinity and low cross-reactivity against another analogue toxin (microcystin-YR). The analytical recovery of MC-LR in the analysis of water samples by the proposed pseudo-ELISA was 96 %–130 % and the limit of detection was 2.64 × 10−4 nM. The obtained results suggest that this competitive pseudo-ELISA could have high potential in the detection of toxins, due to its rapid, sensitive and accurate detection of toxin in water samples.

Molecular Imprinting with Functional DNA

Molecular imprinting refers to templated polymerization with rationally designed monomers, and this is a general method to prepare stable and cost-effective ligands. This attractive concept however suffers from low affinity, low specificity, and limited signaling mechanisms for binding. Acrydite-modified DNA oligonucleotides can be readily copolymerized into acrylic polymers. With molecular recognition and catalytic functions, such functional DNAs are recently shown to enhance the performance of molecularly imprinted polymers (MIPs) in a few ways. First, DNA aptamers are used as macromonomers to enhance binding affinity and specificity of MIPs. Second, DNA can help produce optical signals to follow binding events. Third, imprinting can also improve the performance of catalytic DNA by enhancing its activity and specificity toward the template substrate. Finally, MIP is shown to help aptamer selection. Bulk imprinting, nanoparticle imprinting, and surface imprinting are all demonstrated with DNA. Since both DNA and synthetic polymers are cost effective and stable, their hybrid materials still possess such properties while enhancing the function of each component. This review covers recent developments on the abovementioned aspects of DNA-containing MIPs, a field just emerged in the last five years, and future research directions are discussed toward the end.

Evaluation of Molecularly Imprinted Polymers as Synthetic Virus Neutralizing Antibody Mimics

Rapid development of antibody-based therapeutics are crucial to the agenda of innovative manufacturing of macromolecular therapies to combat emergent diseases. Although highly specific, antibody therapies are costly to produce. Molecularly imprinted polymers (MIPs) constitute a rapidly-evolving class of antigen-recognition materials that act as synthetic antibodies. We report here on the virus neutralizing capacity of hydrogel-based MIPs. We produced MIPs using porcine reproductive and respiratory syndrome virus (PRRSV-1), as a model mammalian virus. Assays were performed to evaluate the specificity of virus neutralization, the effect of incubation time and MIP concentration. Polyacrylamide and N-hydroxymethylacrylamide based MIPs produced a highly significant reduction in infectious viral titer recovered after treatment, reducing it to the limit of detection of the assay. MIP specificity was tested by comparing their neutralizing effects on PRRSV-1 to the effects on the unrelated bovine viral diarrhea virus-1; no significant cross-reactivity was observed. The MIPs demonstrated effective virus neutralization in just 2.5 min and their effect was concentration dependent. These data support the further evaluation of MIPs as synthetic antibodies as a novel approach to the treatment of viral infection.

Molecularly Imprinted Materials for Selective Biological Recognition

Molecular imprinting is an approach of generating imprinting cavities in polymer structures that are compatible with the target molecules. The cavities have memory for shape and chemical recognition, similar to the recognition mechanism of antigen-antibody in organisms. Their structures are also called biomimetic receptors or synthetic receptors. Owing to the excellent selectivity and unique structural predictability of molecularly imprinted materials (MIMs), practical MIMs have become a rapidly evolving research area providing key factors for understanding separation, recognition, and regenerative properties toward biological small molecules to biomacromolecules, even cell and microorganism. In this review, the characteristics, morphologies, and applicability of currently popular carrier materials for molecular imprinting, especially the fundamental role of hydrogels, porous materials, hierarchical nanoparticles, and 2D materials in the separation and recognition of biological templates are discussed. Moreover, through a series of case studies, emphasis is given on introducing imprinting strategies for biological templates with different molecular scales. In particular, the differences and connections between small molecular imprinting (bulk imprinting, "dummy" template imprinting, etc.), large molecular imprinting (surface imprinting, interfacial imprinting, etc.), and cell imprinting strategies are demonstrated in detail. Finally, future research directions are provided.