Plant genetic engineering for biofuel production: towards affordable cellulosic ethanol

Extreme Thermophilic Enzyme CelB-m Efficiently Degrades the Cellulose in Transgenic Arabidopsis thaliana

Agricultural and forestry wastes abundant in the plant biomass are an important resource of green energy. However, little is known about how to exploit efficiently the resource. In this study, we isolated the CelB gene that encodes the extremely thermophilic cellulose-degrading enzyme from Thermotoga maritime. The enzyme-encoding gene CelB was optimized and reconstructed in N' codes by the code adaptability in Arabidopsis thaliana. Then, the optimized gene (CelB-m) or the recombinant gene (CBD-CelB) was fused with the plant binary vector which harbors the β-glucuronidase (GUS) gene that was transferred into Arabidopsis, respectively. GUS assay results showed CelB gene ubiquitous expression in transgenic plants. The enzyme-activity assays exhibited that the cellulase activity in the leaves of CelB-m transgenic plants were significantly higher than that of wild-type plants. The highest amount of enzymatic activity obtained was 131.2 U for every gram of fresh leaves in CBD-CelB plants. In addition, the enzymatic activity was stable at the temperature of 90 °C. These results suggested that the ectopic expression of pertinent biomass-degrading enzymes in transgenic plants can degrade effectively the plant biomass and lay a foundation on the application for the transgenic technique to crops.

Multidimensional High-Resolution Magic Angle Spinning and Solution-State NMR Characterization of (13)C-labeled Plant Metabolites and Lignocellulose

Lignocellulose, which includes mainly cellulose, hemicellulose, and lignin, is a potential resource for the production of chemicals and for other applications. For effective production of materials derived from biomass, it is important to characterize the metabolites and polymeric components of the biomass. Nuclear magnetic resonance (NMR) spectroscopy has been used to identify biomass components; however, the NMR spectra of metabolites and lignocellulose components are ambiguously assigned in many cases due to overlapping chemical shift peaks. Using our ¹³C-labeling technique in higher plants such as poplar samples, we demonstrated that overlapping peaks could be resolved by three-dimensional NMR experiments to more accurately assign chemical shifts compared with two-dimensional NMR measurements. Metabolites of the ¹³C-poplar were measured by high-resolution magic angle spinning NMR spectroscopy, which allows sample analysis without solvent extraction, while lignocellulose components of the ¹³C-poplar dissolved in dimethylsulfoxide/pyridine solvent were analyzed by solution-state NMR techniques. Using these methods, we were able to unambiguously assign chemical shifts of small and macromolecular components in ¹³C-poplar samples. Furthermore, using samples of less than 5 mg, we could differentiate between two kinds of genes that were overexpressed in poplar samples, which produced clearly modified plant cell wall components.

Genome-wide transcriptomic analysis of a superior biomass-degrading strain of A. fumigatus revealed active lignocellulose-degrading genes

Background

Various saprotrophic microorganisms, especially filamentous fungi, can efficiently degrade lignocellulose that is one of the most abundant natural materials on earth. It consists of complex carbohydrates and aromatic polymers found in the plant cell wall and thus in plant debris. Aspergillus fumigatus Z5 was isolated from compost heaps and showed highly efficient plant biomass-degradation capability.

Results

The 29-million base-pair genome of Z5 was sequenced and 9540 protein-coding genes were predicted and annotated. Genome analysis revealed an impressive array of genes encoding cellulases, hemicellulases and pectinases involved in lignocellulosic biomass degradation. Transcriptional responses of A. fumigatus Z5 induced by sucrose, oat spelt xylan, Avicel PH-101 and rice straw were compared. There were 444, 1711 and 1386 significantly differently expressed genes in xylan, cellulose and rice straw, respectively, when compared to sucrose as a control condition.

Conclusions

Combined analysis of the genomic and transcriptomic data provides a comprehensive understanding of the responding mechanisms to the most abundant natural polysaccharides in A. fumigatus. This study provides a basis for further analysis of genes shown to be highly induced in the presence of polysaccharide substrates and also the information which could prove useful for biomass degradation and heterologous protein expression.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1658-2) contains supplementary material, which is available to authorized users.

A novel and fully scalable Agrobacterium spray-based process for manufacturing cellulases and other cost-sensitive proteins in plants

Transient transfection of plants by vacuum infiltration of Agrobacterium vectors represents the state of the art in plant-based protein manufacturing; however, the complexity and cost of this approach restrict it to pharmaceutical proteins. We demonstrated that simple spraying of Nicotiana plants with Agrobacterium vectors in the presence of a surfactant can substitute for vacuum inoculation. When the T-DNA of Agrobacterium encodes viral replicons capable of cell-to-cell movement, up to 90% of the leaf cells can be transfected and express a recombinant protein at levels up to 50% of total soluble protein. This simple, fast and indefinitely scalable process was successfully applied to produce cellulases, one of the most volume- and cost-sensitive biotechnology products. We demonstrate here for the first time that representatives of all hydrolase classes necessary for cellulosic biomass decomposition can be expressed at high levels, stored as silage without significant loss of activity and then used directly as enzyme additives. This process enables production of cellulases, and other potential high-volume products such as noncaloric sweetener thaumatin and antiviral protein griffithsin, at commodity agricultural prices and could find broad applicability in the large-scale production of many other cost-sensitive proteins.

A synergistic effect of pretreatment on cell wall structural changes in barley straw (Hordeum vulgare L.) for efficient bioethanol production

BACKGROUND

Barley straw (Hordeum vulgare L.) is an attractive lignocellulosic material and one of the most abundant renewable resources for fuel ethanol production. Although it has high cellulose and hemicellulose contents, there are several challenges and limitations in the process of converting it to fuel ethanol. High ash, silica and lignin contents in barley straw make it an inferior feedstock for enzymatic hydrolysis. Therefore pretreatment of barley straw could play an important role in inducing structural and compositional changes that increase the efficiency of enzymatic hydrolysis and make the whole process economically viable.

RESULTS

Saccharification was enhanced using various concentrations (0.0, 0.5, 1.0, 2.0 and 3.0% v/v) of a solution of sodium hypochlorite (NaClO) and hydrogen peroxide (H₂O₂) and various reaction times (15, 30 and 45 min) during pretreatment at 121 °C. The highest yield of glucose (447 mg g⁻¹) was achieved by pretreatment with 2.0% NaClO+H₂O₂ solution for 30 min, representing an increase of 65.99% compared with untreated barley straw (152 mg g⁻¹). During fermentation, the highest amount of ethanol (207 mg g⁻¹) was obtained under anaerobic plus 0.4 mmol L⁻¹ benzoic acid conditions, representing an increase of 57.49, 38.16 and 10.14% compared with untreated sample (88 mg g⁻¹), aerobic (128 mg g⁻¹) and anaerobic (186 mg g⁻¹) conditions respectively.

CONCLUSION

The results suggest that pretreatment with 2.0% NaClO+H₂O₂ solution disrupted the recalcitrant structure of barley straw and enhanced the glucose yield and subsequent bioethanol production.

Bacterial biodegradation and bioconversion of industrial lignocellulosic streams

Lignocellulose is a term for plant materials that are composed of matrices of cellulose, hemicellulose, and lignin. Lignocellulose is a renewable feedstock for many industries. Lignocellulosic materials are used for the production of paper, fuels, and chemicals. Typically, industry focuses on transforming the polysaccharides present in lignocellulose into products resulting in the incomplete use of this resource. The materials that are not completely used make up the underutilized streams of materials that contain cellulose, hemicellulose, and lignin. These underutilized streams have potential for conversion into valuable products. Treatment of these lignocellulosic streams with bacteria, which specifically degrade lignocellulose through the action of enzymes, offers a low-energy and low-cost method for biodegradation and bioconversion. This review describes lignocellulosic streams and summarizes different aspects of biological treatments including the bacteria isolated from lignocellulose-containing environments and enzymes which may be used for bioconversion. The chemicals produced during bioconversion can be used for a variety of products including adhesives, plastics, resins, food additives, and petrochemical replacements.

The effect of alkaline pretreatment methods on cellulose structure and accessibility

The effects of different alkaline pretreatments on cellulose structural features and accessibility are compared and correlated with the enzymatic hydrolysis of Populus. The pretreatments are shown to modify polysaccharides and lignin content to enhance the accessibility for cellulase enzymes. The highest increase in the cellulose accessibility was observed in dilute sodium hydroxide, followed by methods using ammonia soaking and lime (Ca(OH)2 ). The biggest increase of cellulose accessibility occurs during the first 10 min of pretreatment, with further increases at a slower rate as severity increases. Low temperature ammonia soaking at longer residence times dissolved a major portion of hemicellulose and exhibited higher cellulose accessibility than high temperature soaking. Moreover, the most significant reduction of degree of polymerization (DP) occurred for dilute sodium hydroxide (NaOH) and ammonia pretreated Populus samples. The study thus identifies important cellulose structural features and relevant parameters related to biomass recalcitrance.

Accumulation of Hydrocarbons by Maize (Zea mays L.) in Remediation of Soils Contaminated with Crude Oil

This study has investigated the use of screened maize for remediation of soil contaminated with crude oil. Pots experiment was carried out for 60 days by transplanting maize seedlings into spiked soils. The results showed that certain amount of crude oil in soil (≤2 147 mg·kg(-1)) could enhance the production of shoot biomass of maize. Higher concentration (6 373 mg·kg(-1)) did not significantly inhibit the growth of plant maize (including shoot and root). Analysis of plant shoot by GC-MS showed that low molecular weight polycyclic aromatic hydrocarbons (PAHs) were detected in maize tissues, but PAHs concentration in the plant did not increase with higher concentration of crude oil in soil. The reduction of total petroleum hydrocarbon in planted soil was up to 52.21-72.84%, while that of the corresponding controls was only 25.85-34.22% in two months. In addition, data from physiological and biochemical indexes demonstrated a favorable adaptability of maize to crude oil pollution stress. This study suggested that the use of maize (Zea mays L.) was a good choice for remediation of soil contaminated with petroleum within a certain range of concentrations.

Photo-biotechnology as a tool to improve agronomic traits in crops

Phytochromes are photosensory phosphoproteins with crucial roles in plant developmental responses to light. Functional studies of individual phytochromes have revealed their distinct roles in the plant's life cycle. Given the importance of phytochromes in key plant developmental processes, genetically manipulating phytochrome expression offers a promising approach to crop improvement. Photo-biotechnology refers to the transgenic expression of phytochrome transgenes or variants of such transgenes. Several studies have indicated that crop cultivars can be improved by modulating the expression of phytochrome genes. The improved traits include enhanced yield, improved grass quality, shade-tolerance, and stress resistance. In this review, we discuss the transgenic expression of phytochrome A and its hyperactive mutant (Ser599Ala-PhyA) in selected crops, such as Zoysia japonica (Japanese lawn grass), Agrostis stolonifera (creeping bentgrass), Oryza sativa (rice), Solanum tuberosum (potato), and Ipomea batatas (sweet potato). The transgenic expression of PhyA and its mutant in various plant species imparts biotechnologically useful traits. Here, we highlight recent advances in the field of photo-biotechnology and review the results of studies in which phytochromes or variants of phytochromes were transgenically expressed in various plant species. We conclude that photo-biotechnology offers an excellent platform for developing crops with improved properties.

Modifying plants for biofuel and biomaterial production

The productivity of plants as biofuel or biomaterial crops is established by both the yield of plant biomass per unit area of land and the efficiency of conversion of the biomass to biofuel. Higher yielding biofuel crops with increased conversion efficiencies allow production on a smaller land footprint minimizing competition with agriculture for food production and biodiversity conservation. Plants have traditionally been domesticated for food, fibre and feed applications. However, utilization for biofuels may require the breeding of novel phenotypes, or new species entirely. Genomics approaches support genetic selection strategies to deliver significant genetic improvement of plants as sources of biomass for biofuel manufacture. Genetic modification of plants provides a further range of options for improving the composition of biomass and for plant modifications to assist the fabrication of biofuels. The relative carbohydrate and lignin content influences the deconstruction of plant cell walls to biofuels. Key options for facilitating the deconstruction leading to higher monomeric sugar release from plants include increasing cellulose content, reducing cellulose crystallinity, and/or altering the amount or composition of noncellulosic polysaccharides or lignin. Modification of chemical linkages within and between these biomass components may improve the ease of deconstruction. Expression of enzymes in the plant may provide a cost-effective option for biochemical conversion to biofuel.

Understanding the relationship between cotton fiber properties and non-cellulosic cell wall polysaccharides

A detailed knowledge of cell wall heterogeneity and complexity is crucial for understanding plant growth and development. One key challenge is to establish links between polysaccharide-rich cell walls and their phenotypic characteristics. It is of particular interest for some plant material, like cotton fibers, which are of both biological and industrial importance. To this end, we attempted to study cotton fiber characteristics together with glycan arrays using regression based approaches. Taking advantage of the comprehensive microarray polymer profiling technique (CoMPP), 32 cotton lines from different cotton species were studied. The glycan array was generated by sequential extraction of cell wall polysaccharides from mature cotton fibers and screening samples against eleven extensively characterized cell wall probes. Also, phenotypic characteristics of cotton fibers such as length, strength, elongation and micronaire were measured. The relationship between the two datasets was established in an integrative manner using linear regression methods. In the conducted analysis, we demonstrated the usefulness of regression based approaches in establishing a relationship between glycan measurements and phenotypic traits. In addition, the analysis also identified specific polysaccharides which may play a major role during fiber development for the final fiber characteristics. Three different regression methods identified a negative correlation between micronaire and the xyloglucan and homogalacturonan probes. Moreover, homogalacturonan and callose were shown to be significant predictors for fiber length. The role of these polysaccharides was already pointed out in previous cell wall elongation studies. Additional relationships were predicted for fiber strength and elongation which will need further experimental validation.

Cell wall proteomics of sugarcane cell suspension cultures

The use of cell walls to produce cellulosic ethanol from sugarcane bagasse is a new challenge. A better knowledge of proteins involved in cell wall remodelling is essential to improve the saccharification processes. Cell suspension cultures were used for this first cell wall proteomics study of sugarcane. Proteins extracted from cell walls were identified using an adapted protocol. They were extracted using 0.2 M CaCl2 and 2 M LiCl after purification of cell walls. The proteins were then identified by the innovative nanoACQUITY UPLC MS/MS technology and bioinformatics using the translated SUCEST EST cluster database of sugarcane. The experiments were reproduced three times. Since Sorghum bicolor is the closest plant with a fully sequenced genome, homologous proteins were searched for to complete the annotation of proteins, that is, prediction of subcellular localization and functional domains. Altogether, 69 different proteins predicted to be secreted were identified among 377 proteins. The reproducibility of the experiments is discussed. These proteins were distributed into eight functional classes. Oxidoreductases such as peroxidases were well represented, whereas glycoside hydrolases were scarce. This work provides information about the proteins that could be manipulated through genetic transformation, to increase second-generation ethanol production.

Full-length enriched cDNA libraries and ORFeome analysis of sugarcane hybrid and ancestor genotypes

Sugarcane is a major crop used for food and bioenergy production. Modern cultivars are hybrids derived from crosses between Saccharum officinarum and Saccharum spontaneum. Hybrid cultivars combine favorable characteristics from ancestral species and contain a genome that is highly polyploid and aneuploid, containing 100–130 chromosomes. These complex genomes represent a huge challenge for molecular studies and for the development of biotechnological tools that can facilitate sugarcane improvement. Here, we describe full-length enriched cDNA libraries for Saccharum officinarum, Saccharum spontaneum, and one hybrid genotype (SP803280) and analyze the set of open reading frames (ORFs) in their genomes (i.e., their ORFeomes). We found 38,195 (19%) sugarcane-specific transcripts that did not match transcripts from other databases. Less than 1.6% of all transcripts were ancestor-specific (i.e., not expressed in SP803280). We also found 78,008 putative new sugarcane transcripts that were absent in the largest sugarcane expressed sequence tag database (SUCEST). Functional annotation showed a high frequency of protein kinases and stress-related proteins. We also detected natural antisense transcript expression, which mapped to 94% of all plant KEGG pathways; however, each genotype showed different pathways enriched in antisense transcripts. Our data appeared to cover 53.2% (17,563 genes) and 46.8% (937 transcription factors) of all sugarcane full-length genes and transcription factors, respectively. This work represents a significant advancement in defining the sugarcane ORFeome and will be useful for protein characterization, single nucleotide polymorphism and splicing variant identification, evolutionary and comparative studies, and sugarcane genome assembly and annotation.

Expression of Aeromonas punctata ME-1 exo-xylanase X in E. coli for efficient hydrolysis of xylan to xylose

exo-Xylanase X from Aeromonas punctata ME-1 was functionally expressed in Escherichia coli with a carboxy terminal His tag (6×) and a molecular mass of 39.42 kDa, which is in agreement with the prediction from its amino acid composition. The recombinant exo-xylanase reached 186 mg l(-1) after induction by isopropyl β-D-1-thiogalactopyranoside. Its optimal temperature and pH were 50 °C and 6, respectively. The enzyme showed not only an exo-xylanase activity with K m of 3.90 mg ml(-1) and V max of 12.9 U μg(-1) for hydrolysis of Remazol Brilliant Blue-xylan but also a considerable exo-glucanase activity (27.9 U mg(-1)) on P-nitrophenyl β-D-cellobioside. It hydrolyzed xylan predominantly to xylobiose, xylotriose, xylotetraose, and xylose. An enzyme mixture of exo-xylanase and endo-xylanase (50 μg ml(-1) each) yielded a larger amount (330 mg l(-1)) of xylose from beechwood xylan than the controls (270 and 150 mg l(-1)) using them alone at 100 μg ml(-1), indicating a synergistic action between the two xylanases favoring the hydrolysis of beechwood xylan to release more xylose.

Electron tomography of cryo-immobilized plant tissue: a novel approach to studying 3D macromolecular architecture of mature plant cell walls in situ

Cost-effective production of lignocellulosic biofuel requires efficient breakdown of cell walls present in plant biomass to retrieve the wall polysaccharides for fermentation. In-depth knowledge of plant cell wall composition is therefore essential for improving the fuel production process. The precise spatial three-dimensional (3D) organization of cellulose, hemicellulose, pectin and lignin within plant cell walls remains unclear to date since the microscopy techniques used so far have been limited to two-dimensional, topographic or low-resolution imaging, or required isolation or chemical extraction of the cell walls. In this paper we demonstrate that by cryo-immobilizing fresh tissue, then either cryo-sectioning or freeze-substituting and resin embedding, followed by cryo- or room temperature (RT) electron tomography, respectively, we can visualize previously unseen details of plant cell wall architecture in 3D, at macromolecular resolution (∼2 nm), and in near-native state. Qualitative and quantitative analyses showed that wall organization of cryo-immobilized samples were preserved remarkably better than conventionally prepared samples that suffer substantial extraction. Lignin-less primary cell walls were well preserved in both self-pressurized rapidly frozen (SPRF), cryo-sectioned samples as well as high-pressure frozen, freeze-substituted and resin embedded (HPF-FS-resin) samples. Lignin-rich secondary cell walls appeared featureless in HPF-FS-resin sections presumably due to poor stain penetration, but their macromolecular features could be visualized in unprecedented details in our cryo-sections. While cryo-tomography of vitreous tissue sections is currently proving to be instrumental in developing 3D models of lignin-rich secondary cell walls, here we confirm that the technically easier method of RT-tomography of HPF-FS-resin sections could be used immediately for routine study of low-lignin cell walls. As a proof of principle, we characterized the primary cell walls of a mutant (cob-6) and wild type Arabidopsis hypocotyl parenchyma cells by RT-tomography of HPF-FS-resin sections, and detected a small but significant difference in spatial organization of cellulose microfibrils in the mutant walls.

Recombinant hyperthermophilic enzyme expression in plants: a novel approach for lignocellulose digestion

Plant biomass, as an abundant renewable carbon source, is a promising alternative to fossil fuels. However, the enzymes most commonly used for depolymerization of lignocellulosic biomass are expensive, and the development of cost-effective alternative conversion technologies would be desirable. One possible option is the heterologous expression of genes encoding lignocellulose-digesting enzymes in plant tissues. To overcome simultaneously issues of toxicity and incompatibility with high-temperature steam explosion processes, the use of heterologous genes encoding hyperthermophilic enzymes may be an attractive alternative. This approach could reduce the need for exogenous enzyme additions prior to fermentation, reducing the cost of the complete processing operation. This review highlights recent advances and future prospects for using hyperthermophilic enzymes in the biofuels industry.

Cell wall polysaccharide distribution in Miscanthus lutarioriparius stem using immuno-detection

Cell wall polysaccharides' occurrences in two internodes of different development stages in M. lutarioriparius stem were analyzed and three major differences between them were identified by cell wall polysaccharide probes. Deposition and modification of cell wall polysaccharides during stem development affect biomass yield of the Miscanthus energy crop. The distribution patterns of cell wall polysaccharides in the 2nd and the 11th internodes of M. lutarioriparius stem were studied using in situ immunofluorescence assay. Crystalline cellulose and xylan were present in most of the stem tissues except phloem, where xyloglucan was the major composition of hemicellulose. The distribution of pectin polysaccharides varied in stem tissues, particularly in vascular bundle elements. Xylogalacturonan, feruloylated-1,4-β-D-galactan and (1,3)(1,4)-β-glucans, however, were insufficient for antibodies binding in both internodes. Furthermore, the distribution of cell wall polysaccharides was differentiated in the two internodes of M. lutarioriparius. The significant differences in the pattern of occurrence of long 1,5-α-L-arabinan chain, homogalacturonan and fucosylated xyloglucans epitope were detected between the two internodes. In addition, the relationships between probable functions of polysaccharides and their distribution patterns in M. lutarioriparius stem cell wall were discussed, which would be helpful to understand the growth characteristics of Miscanthus and identify potential targets for either modification or degradation.

Evanescent field: a potential light-tool for theranostics application

A noninvasive or minimally invasive optical approach for theranostics, which would reinforce diagnosis, treatment, and preferably guidance simultaneously, is considered to be major challenge in biomedical instrument design. In the present work, we have developed an evanescent field-based fiber optic strategy for the potential theranostics application in hyperbilirubinemia, an increased concentration of bilirubin in the blood and is a potential cause of permanent brain damage or even death in newborn babies. Potential problem of bilirubin deposition on the hydroxylated fiber surface at physiological pH (7.4), that masks the sensing efficacy and extraction of information of the pigment level, has also been addressed. Removal of bilirubin in a blood-phantom (hemoglobin and human serum albumin) solution from an enhanced level of 77 μM/l (human jaundice >50 μM/l) to ~30 μM/l (normal level ~25 μM/l in human) using our strategy has been successfully demonstrated. In a model experiment using chromatography paper as a mimic of biological membrane, we have shown efficient degradation of the bilirubin under continuous monitoring for guidance of immediate/future course of action.

Manipulating cinnamyl alcohol dehydrogenase (CAD) expression in flax affects fibre composition and properties

BACKGROUND

In recent decades cultivation of flax and its application have dramatically decreased. One of the reasons for this is unpredictable quality and properties of flax fibre, because they depend on environmental factors, retting duration and growing conditions. These factors have contribution to the fibre composition, which consists of cellulose, hemicelluloses, lignin and pectin. By far, it is largely established that in flax, lignin reduces an accessibility of enzymes either to pectin, hemicelluloses or cellulose (during retting or in biofuel synthesis and paper production).Therefore, in this study we evaluated composition and properties of flax fibre from plants with silenced CAD (cinnamyl alcohol dehydrogenase) gene, which is key in the lignin biosynthesis. There is evidence that CAD is a useful tool to improve lignin digestibility and/or to lower the lignin levels in plants.

RESULTS

Two studied lines responded differentially to the introduced modification due to the efficiency of the CAD silencing. Phylogenetic analysis revealed that flax CAD belongs to the "bona-fide" CAD family. CAD down-regulation had an effect in the reduced lignin amount in the flax fibre cell wall and as FT-IR results suggests, disturbed lignin composition and structure. Moreover introduced modification activated a compensatory mechanism which was manifested in the accumulation of cellulose and/or pectin. These changes had putative correlation with observed improved fiber's tensile strength. Moreover, CAD down-regulation did not disturb at all or has only slight effect on flax plants' development in vivo, however, the resistance against flax major pathogen Fusarium oxysporum decreased slightly. The modification positively affected fibre possessing; it resulted in more uniform retting.

CONCLUSION

The major finding of our paper is that the modification targeted directly to block lignin synthesis caused not only reduced lignin level in fibre, but also affected amount and organization of cellulose and pectin. However, to conclude that all observed changes are trustworthy and correlated exclusively to CAD repression, further analysis of the modified plants genome is necessary. Secondly, this is one of the first studies on the crop from the low-lignin plants from the field trail which demonstrates that such plants could be successfully cultivated in a field.

Molecular and functional characterization of cold-responsive C-repeat binding factors from Brachypodium distachyon

BACKGROUND

Adverse environmental conditions severely influence various aspects of plant growth and developmental processes, causing worldwide reduction of crop yields. The C-repeat binding factors (CBFs) are critical transcription factors constituting the gene regulatory network that mediates the acclimation process to low temperatures. They regulate a large number of cold-responsive genes, including COLD-REGULATED (COR) genes, via the CBF-COR regulon. Recent studies have shown that the CBF transcription factors also play a role in plant responses to drought and salt stresses. Putative CBF gene homologues and their downstream genes are also present in the genome of Brachypodium distachyon, which is perceived as a monocot model in recent years. However, they have not been functionally characterized at the molecular level.

RESULTS

Three CBF genes that are responsive to cold were identified from Brachypodium, designated BdCBF1, BdCBF2, and BdCBF3, and they were functionally characterized by molecular biological and transgenic approaches in Brachypodium and Arabidopsis thaliana. Our results demonstrate that the BdCBF genes contribute to the tolerance response of Brachypodium to cold, drought, and salt stresses by regulating downstream targets, such as DEHYDRIN5.1 (Dhn5.1) and COR genes. The BdCBF genes are induced under the environmental stress conditions. The BdCBF proteins possess transcriptional activation activity and bind directly to the promoters of the target genes. Transgenic Brachypodium plants overexpressing the BdCBF genes exhibited enhanced resistance to drought and salt stresses as well as low temperatures, and accordingly endogenous contents of proline and soluble sugars were significantly elevated in the transgenic plants. The BdCBF transcription factors are also functional in the heterologous system Arabidopsis. Transgenic Arabidopsis plants overexpressing the BdCBF genes were also tolerant to freezing, drought, and salt stresses, and a set of stress-responsive genes was upregulated in the transgenic Arabidopsis plants.

CONCLUSIONS

Taken together, our results strongly support that the BdCBF transcription factors are key regulators of cold stress responses in Brachypodium and the CBF-mediated cold stress signaling pathway is conserved in this plant species. We believe that this study would confer great impact on stress biology in monocot species and could be applied to engineer abiotic stress tolerance of bioenergy grass species.

Synergy of crude enzyme cocktail from cold-adapted Cladosporium cladosporioides Ch2-2 with commercial xylanase achieving high sugars yield at low cost

BACKGROUND

The efficiency and cost of current lignocellulosic enzymes still limit the large-scale production of cellulosic ethanol in industry. Residual lignin after pretreatment severely depresses the activity of polysaccharide hydrolases and the h ydrolysis of holocellulose. If we include in hydrolase mixture construction the ligninase involved in lignin degradation, which mainly includes laccase, manganese peroxidases (MnP) and lignin peroxidase (LiP), it is feasible that this could greatly improve the fermentable sugars yield.

RESULTS

The psychrophilic lignocellulosic enzymes system of Cladosporium cladosporioides Ch2-2 including ligninase and polysaccharide hydrolases was suitable for selective delignification and efficient saccharification of biomass with wide thermal adaptability. The purified laccase was optimally active at 15°C and pH 3.5, exhibiting high thermostability over a broad range of temperatures (between 4 and 40°C). In addition, manganese-independent peroxidase (MIP), a special type of ligninase with the capacity to oxidize dimethyl phthalate (DMP) in the absence of H2O2 and Mn(2+), was optimally active at 20°C and pH 2.5, exhibiting high thermostability over a broad range of temperatures (4 and 28°C), while depressed completely by Fe(2+) and essentially unaffected by EDTA. Synergy between Ch2-2 crude enzymes and commercial xylanase obviously enhanced biomass hydrolysis, which could take the place of expensive commercial cellulase mixture. The maximum value of synergistic degree reached 4.7 at 28°C, resulting in 10.1 mg/mL reducing sugars.

CONCLUSIONS

The psychrophilic enzymes system of C. cladosporioides Ch2-2 with a different synergistic mechanism has huge potential for the enhancement of biomass hydrolysis at mesophilic and low temperatures. The application scope of the lignocellulosic enzyme cocktail could be greatly enlarged by optimizing the operation conditions specific to the characteristics of ligninase.

Improved recombinant cellulase expression in chloroplast of tobacco through promoter engineering and 5' amplification promoting sequence

Economical production of bioethanol from lignocellulosic biomass still faces many technical limitations. Cost-effective production of fermentable sugars is still not practical for large-scale production of bioethanol due to high costs of lignocellulolytic enzymes. Therefore, plant molecular farming, where plants are used as bioreactors, was developed for the mass production of cell wall degrading enzymes that will help reduce costs. Subcellular targeting is also potentially more suitable for the accumulation of recombinant cellulases. Herein, we generated transgenic tobacco plants (Nicotiana tabacum cv. SR1) that accumulated Thermotoga maritima BglB cellulase, which was driven by the alfalfa RbcsK-1A promoter and contained a small subunit of the rubisco complex transit peptide. The generated transformants possessed high specific BglB activity and did not show any abnormal phenotypes. Furthermore, we genetically engineered the RbcsK-1A promoter (MRbcsK-1A) and fused the amplification promoting sequence (aps) to MRbcsK-1A promoter to obtain high expression of BglB in transgenic plants. AMRsB plant lines with aps-MRbcsK-1A promoter showed the highest specific activity of BglB, and the accumulated BglB protein represented up to 9.3 % of total soluble protein. When BglB was expressed in Arabidopsis and tobacco plants, the maximal production capacity of recombinant BglB was 0.59 and 1.42 mg/g wet weight, respectively. These results suggests that suitable recombinant expression of cellulases in subcellular compartments such as chloroplasts will contribute to the cost-effective production of enzymes, and will serve as the solid foundation for the future commercialization of bioethanol production via plant molecular farming.

Overcoming biomass recalcitrance by combining genetically modified switchgrass and cellulose solvent-based lignocellulose pretreatment

Decreasing lignin content of plant biomass by genetic engineering is believed to mitigate biomass recalcitrance and improve saccharification efficiency of plant biomass. In this study, we compared two different pretreatment methods (i.e., dilute acid and cellulose solvent) on transgenic plant biomass samples having different lignin contents and investigated biomass saccharification efficiency. Without pretreatment, no correlation was observed between lignin contents of plant biomass and saccharification efficiency. After dilute acid pretreatment, a strong negative correlation between lignin content of plant samples and overall glucose release was observed, wherein the highest overall enzymatic glucan digestibility was 70% for the low-lignin sample. After cellulose solvent- and organic solvent-based lignocellulose fractionation pretreatment, there was no strong correlation between lignin contents and high saccharification efficiencies obtained (i.e., 80–90%). These results suggest that the importance of decreasing lignin content in plant biomass to saccharification was largely dependent on pretreatment choice and conditions.

Molecular characterization of ferulate 5-hydroxylase gene from kenaf (Hibiscus cannabinus L.)

The purpose of this study is to clone and characterize the expression pattern of a F5H gene encoding ferulate 5-hydroxylase in the phenylpropanoid pathway from kenaf (Hibiscus cannabinus L.). Kenaf is a fast-growing dicotyledonous plant valued for its biomass. F5H, a cytochrome P450-dependent monooxygenase (CYP84), is a key enzyme for syringyl lignin biosynthesis. The full length of the F5H ortholog was cloned and characterized. The full-length F5H ortholog consists of a 1,557-bp open reading frame (ORF) encoding 518 amino acids (GenBank Accession number JX524278). The deduced amino acid sequence showed that kenaf F5H had the highest similarity (78%) with that of Populus trichocarpa. Transcriptional analysis of F5H ortholog was conducted using quantitative real-time PCR during the developmental stages of various tissues and in response to various abiotic stresses. The highest transcript level of the F5H ortholog was observed in immature flower tissues and in early stage (6 week-old) of stem tissues, with a certain level of expression in all tissues tested. The highest transcript level of F5H ortholog was observed at the late time points after treatments with NaCl (48 h), wounding (24 h), cold (24 h), abscisic acid (24 h), and methyl jasmonate (24 h).

Cold stress causes rapid but differential changes in properties of plasma membrane H(+)-ATPase of camelina and rapeseed

Camelina (Camelina sativa) and rapeseed (Brassica napus) are well-established oil-seed crops with great promise also for biofuels. Both are cold-tolerant, and camelina is regarded to be especially appropriate for production on marginal lands. We examined physiological and biochemical alterations in both species during cold stress treatment for 3 days and subsequent recovery at the temperature of 25°C for 0, 0.25, 0.5, 1, 2, 6, and 24h, with particular emphasis on the post-translational regulation of the plasma membrane (PM) H(+)-ATPase (EC3.6.3.14). The activity and translation of the PM H(+)-ATPase, as well as 14-3-3 proteins, increased after 3 days of cold stress in both species but recovery under normal conditions proceeded differently. The increase in H(+)-ATPase activity was the most dramatic in camelina roots after recovery for 2h at 25°C, followed by decay to background levels within 24h. In rapeseed, the change in H(+)-ATPase activity during the recovery period was less pronounced. Furthermore, H(+)-pumping increased in both species after 15min recovery, but to twice the level in camelina roots compared to rapeseed. Protein gel blot analysis with phospho-threonine anti-bodies showed that an increase in phosphorylation levels paralleled the increase in H(+)-transport rate. Thus our results suggest that cold stress and recovery in camelina and rapeseed are associated with PM H(+)-fluxes that may be regulated by specific translational and post-translational modifications.

Direct amplification of new cellulase genes from woodland soil purified DNA

Eight genes encoding cellulolytic enzymes were obtained by direct PCR amplification of genomic DNA recovered from woodland soil samples. The direct amplifications were carried out by using primers designed from available online cellulase nucleotide sequences. The isolated genes were all different from each other and homologous to endo-β-1,4-glucanases of Bacillus subtilis. The cellulases were functionally expressed in Escherichia coli and tested on soluble substrate at 37 and 60 °C, showing different cellulolytic activities. Among these, the enzyme renamed CelWS6 exhibited good activity at higher temperatures. Further analysis of CelWS6 showed a high performance in acid environments (between pH 4.0 and 6.0) and at elevated temperatures with its maximum activity at pH 5.0 and 50 °C. At the optimum pH, it was very stable since more than 80 % of its original activity was maintained after an incubation of 120 min at 60 °C. Because the cellulases had different cellulolytic activities, but similar amino acid sequences, it was possible to assess the relationship between sequence and protein function.

Combinatorial genetic perturbation to refine metabolic circuits for producing biofuels and biochemicals

Recent advances in metabolic engineering have enabled microbial factories to compete with conventional processes for producing fuels and chemicals. Both rational and combinatorial approaches coupled with synthetic and systematic tools play central roles in metabolic engineering to create and improve a selected microbial phenotype. Compared to knowledge-based rational approaches, combinatorial approaches exploiting biological diversity and high-throughput screening have been demonstrated as more effective tools for improving various phenotypes of interest. In particular, identification of unprecedented targets to rewire metabolic circuits for maximizing yield and productivity of a target chemical has been made possible. This review highlights general principles and the features of the combinatorial approaches using various libraries to implement desired phenotypes for strain improvement. In addition, recent applications that harnessed the combinatorial approaches to produce biofuels and biochemicals will be discussed.

Mapping the lignin distribution in pretreated sugarcane bagasse by confocal and fluorescence lifetime imaging microscopy

BACKGROUND

Delignification pretreatments of biomass and methods to assess their efficacy are crucial for biomass-to-biofuels research and technology. Here, we applied confocal and fluorescence lifetime imaging microscopy (FLIM) using one- and two-photon excitation to map the lignin distribution within bagasse fibers pretreated with acid and alkali. The evaluated spectra and decay times are correlated with previously calculated lignin fractions. We have also investigated the influence of the pretreatment on the lignin distribution in the cell wall by analyzing the changes in the fluorescence characteristics using two-photon excitation. Eucalyptus fibers were also analyzed for comparison.

RESULTS

Fluorescence spectra and variations of the decay time correlate well with the delignification yield and the lignin distribution. The decay dependences are considered two-exponential, one with a rapid (τ1) and the other with a slow (τ2) decay time. The fastest decay is associated to concentrated lignin in the bagasse and has a low sensitivity to the treatment. The fluorescence decay time became longer with the increase of the alkali concentration used in the treatment, which corresponds to lignin emission in a less concentrated environment. In addition, the two-photon fluorescence spectrum is very sensitive to lignin content and accumulation in the cell wall, broadening with the acid pretreatment and narrowing with the alkali one. Heterogeneity of the pretreated cell wall was observed.

CONCLUSIONS

Our results reveal lignin domains with different concentration levels. The acid pretreatment caused a disorder in the arrangement of lignin and its accumulation in the external border of the cell wall. The alkali pretreatment efficiently removed lignin from the middle of the bagasse fibers, but was less effective in its removal from their surfaces. Our results evidenced a strong correlation between the decay times of the lignin fluorescence and its distribution within the cell wall. A new variety of lignin fluorescence states were accessed by two-photon excitation, which allowed an even broader, but complementary, optical characterization of lignocellulosic materials. These results suggest that the lignin arrangement in untreated bagasse fiber is based on a well-organized nanoenvironment that favors a very low level of interaction between the molecules.

Association genetics of chemical wood properties in black poplar (Populus nigra)

Black poplar (Populus nigra) is a potential feedstock for cellulosic ethanol production, although breeding for this specific end use is required. Our goal was to identify associations between single nucleotide polymorphism (SNP) markers within candidate genes encoding cellulose and lignin biosynthetic enzymes, with chemical wood property phenotypic traits, toward the aim of developing genomics-based breeding technologies for bioethanol production. Pyrolysis molecular beam mass spectrometry was used to determine contents of five- and six-carbon sugars, lignin, and syringyl : guaiacyl ratio. The association population included 599 clones from 17 half-sib families, which were successfully genotyped using 433 SNPs from 39 candidate genes. Statistical analyses were performed to estimate genetic parameters, linkage disequilibrium (LD), and single marker and haplotype-based associations. A moderate to high heritability was observed for all traits. The LD, across all candidate genes, showed a rapid decay with physical distance. Analysis of single marker-phenotype associations identified six significant marker-trait pairs, whereas nearly 280 haplotypes were associated with phenotypic traits, in both an individual and multiple trait-specific manner. The rapid decay of LD within candidate genes in this population and the genetic associations identified suggest a close relationship between the associated SNPs and the causative polymorphisms underlying the genetic variation of lignocellulosic traits in black poplar.

Isolation and structural characterization of lignin from cotton stalk treated in an ammonia hydrothermal system

To investigate the potential for the utilization of cotton stalk, ammonia hydrothermal treatment was applied to fractionate the samples into aqueous ammonia-soluble and ammonia-insoluble portions. The ammonia-soluble portion was purified to yield lignin fractions. The lignin fractions obtained were characterized by wet chemistry (carbohydrate analysis) and spectroscopy methods (FT-IR, ¹³C and ¹H-¹³C HSQC NMR spectroscopy) as well as gel permeation chromatography (GPC). The results showed that the cotton stalk lignin fractions were almost absent of neutral sugars (0.43%–1.29%) and had relatively low average molecular weights (1255–1746 g/mol). The lignin fractions belonged to typical G-S lignin, which was composed predominately of G-type units (59%) and noticeable amounts of S-type units (40%) together with a small amount of H-type units (~1%). Furthermore, the ammonia-extractable lignin fractions were mainly composed of β-O-4′ inter-unit linkages (75.6%), and small quantities of β-β′ (12.2%), together with lower amounts of β-5′ carbon-carbon linkages (7.4%) and p-hydroxycinnamyl alcohol end groups.

Automatic Segmentation and Quantification of Filamentous Structures in Electron Tomography

Electron tomography is a promising technology for imaging ultrastructures at nanoscale resolutions. However, image and quantitative analyses are often hindered by high levels of noise, staining heterogeneity, and material damage either as a result of the electron beam or sample preparation. We have developed and built a framework that allows for automatic segmentation and quantification of filamentous objects in 3D electron tomography. Our approach consists of three steps: (i) local enhancement of filaments by Hessian filtering; (ii) detection and completion (e.g., gap filling) of filamentous structures through tensor voting; and (iii) delineation of the filamentous networks. Our approach allows for quantification of filamentous networks in terms of their compositional and morphological features. We first validate our approach using a set of specifically designed synthetic data. We then apply our segmentation framework to tomograms of plant cell walls that have undergone different chemical treatments for polysaccharide extraction. The subsequent compositional and morphological analyses of the plant cell walls reveal their organizational characteristics and the effects of the different chemical protocols on specific polysaccharides.

Analysis of soluble lignin in sugarcane by ultrahigh performance liquid chromatography-tandem mass spectrometry with a do-it-yourself oligomer database

Lignin is a polymer found in the cell wall of plants and is one of the main obstacles to the implementation of second-generation ethanol production because it confers the recalcitrance of the lignocellulosic material. The recalcitrance of biomass is affected by the amount of lignin, by its monomer composition, and the way the monomers are arranged in the plant cell wall. Analysis of lignin structure demands mass spectrometry analysis, and identification of oligomers is usually based on libraries produced by laborious protocols. A robust method to build a do-it-yourself lignin oligomer library was tested. This library can be built using commercially available enzymes, standards, and reagents and is relatively easy to accomplish. An ultrahigh performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for the separation and characterization of monomers and oligomers was developed and was equally applicable to the synthetic lignin and to soluble lignin extracted from a sample of sugar cane.

Effects of nitrogen source and water availability on stem carbohydrates and cellulosic bioethanol traits of alfalfa plants

Symbiotic association of legumes with rhizobia frequently results in higher photosynthesis and soluble carbohydrates in comparison with nitrate-fed plants, which might improve its potential for biomass conversion into bioethanol. A greenhouse experiment was conducted to examine the effects of nitrogen source and water availability on stem characteristics and on relationships between carbohydrates, phenolic metabolism activity and cell wall composition in alfalfa (Medicago sativa L. cv. Aragón). The experiment included three treatments: (1) plants fed with ammonium nitrate (AN); (2) plants inoculated with rhizobia (R); and (3) plants inoculated with rhizobia and amended with sewage sludge (RS). Two levels of irrigation were imposed: (1) well-watered and (2) drought stress. Under well-watered conditions, nitrogen-fixing plants have increased photosynthesis and stem fermentable carbohydrate concentrations, which result in higher potential for biomass conversion to bioethanol than in AN plants. The latter had higher lignin due to enhanced activities of phenolic metabolism-related enzymes. Under drought conditions, the potential for bioethanol conversion decreased to a similar level in all treatments. Drought-stressed nitrogen-fixing plants have high concentrations of fermentable carbohydrates and cell wall cellulose, but ammonium nitrate-fed plants produced higher plant and stem biomass, which might compensate the decreasing stem carbohydrates and cellulose concentrations.

Bioligninolysis: recent updates for biotechnological solution

Bioligninolysis involves living organisms and/or their products in degradation of lignin, which is highly resistant, plant-originated polymer having three-dimensional network of dimethoxylated (syringyl), monomethoxylated (guaiacyl), and non-methoxylated (p-hydroxyphenyl) phenylpropanoid and acetylated units. As a major repository of aromatic chemical structures on earth, lignin bears paramount significance for its removal owing to potential application of bioligninolytic systems in industrial production. Early reports illustrating the discovery and cloning of ligninolytic biocatalysts in fungi was truly a landmark in the field of enzymatic delignification. However, the enzymology for bacterial delignification is hitherto poorly understood. Moreover, the lignin-degrading bacterial genes are still unknown and need further exploration. This review deals with the current knowledge about ligninolytic enzyme families produced by fungi and bacteria, their mechanisms of action, and genetic regulation and reservations, which render them attractive candidates in biotechnological applications.

Development of feedstocks for cellulosic biofuels

The inclusion of cellulosic ethanol in the Energy Independence and Security Act (EISA) of 2007 and the revised Renewable Fuel Standard (RFS2) has spurred development of the first commercial scale cellulosic ethanol biorefineries. These efforts have also revived interest in the development of dedicated energy crops selected for biomass productivity and for properties that facilitate conversion of biomass to liquid fuels. While many aspects of developing these feedstocks are compatible with current agricultural activities, improving biomass productivity may provide opportunities to expand the potential for biofuel production beyond the classical research objectives associated with improving traditional food and feed crops.

Arabidopsis NMD3 is required for nuclear export of 60S ribosomal subunits and affects secondary cell wall thickening

NMD3 is required for nuclear export of the 60S ribosomal subunit in yeast and vertebrate cells, but no corresponding function of NMD3 has been reported in plants. Here we report that Arabidopsis thaliana NMD3 (AtNMD3) showed a similar function in the nuclear export of the 60S ribosomal subunit. Interference with AtNMD3 function by overexpressing a truncated dominant negative form of the protein lacking the nuclear export signal sequence caused retainment of the 60S ribosomal subunits in the nuclei. More interestingly, the transgenic Arabidopsis with dominant negative interference of AtNMD3 function showed a striking failure of secondary cell wall thickening, consistent with the altered expression of related genes and composition of cell wall components. Observation of a significant decrease of rough endoplasmic reticulum (RER) in the differentiating interfascicular fiber cells of the transgenic plant stems suggested a link between the defective nuclear export of 60S ribosomal subunits and the abnormal formation of the secondary cell wall. These findings not only clarified the evolutionary conservation of NMD3 functions in the nuclear export of 60S ribosomal subunits in yeast, animals and plants, but also revealed a new facet of the regulatory mechanism underlying secondary cell wall thickening in Arabidopsis. This new facet is that the nuclear export of 60S ribosomal subunits and the formation of RER may play regulatory roles in coordinating protein synthesis in cytoplasm and transcription in nuclei.

Expression of the affinity tags, glutathione-S-transferase and maltose-binding protein, in tobacco chloroplasts

Chloroplast transformation offers an exciting platform for the safe, inexpensive and large-scale production of recombinant proteins in plants. An important advantage for the isolation of proteins produced in the chloroplast would be the use of affinity tags for rapid purification by affinity chromatography. To date, only His-tags have been used. In this study, we have tested the feasibility of expressing two additional affinity tags: glutathione-S-transferase (GST) and a His-tagged derivative of the maltose-binding protein (His₆-MBP). By using the chloroplast 16S rRNA promoter and 5' untranslated region of phage T7 gene 10, GST and His₆-MBP were expressed in homoplastomic tobacco plants at approximately 7% and 37% of total soluble protein, respectively. GST could be purified by one-step-affinity purification using a glutathione column. Much better recoveries were obtained for His₆-MBP by using a twin-affinity purification procedure involving first immobilised nickel followed by binding to amylose. Interestingly, expression of GST led to cytoplasmic male sterility. Overall, our work expands the tools available for purifying recombinant proteins from the chloroplast.