Nanofluidics coming of age

Advancing osmotic power generation by covalent organic framework monolayer

Osmotic power, also known as 'blue energy', is produced by mixing solutions of different salt concentrations, and represents a vast, sustainable and clean energy source. The efficiency of harvesting osmotic power is primarily determined by the transmembrane performance, which is in turn dependent on ion conductivity and selectivity towards positive or negative ions. Atomically or molecularly thin membranes with a uniform pore environment and high pore density are expected to possess an outstanding ion permeability and selectivity, but remain unexplored. Here we demonstrate that covalent organic framework monolayer membranes that feature a well-ordered pore arrangement can achieve an extremely low membrane resistivity and ultrahigh ion conductivity. When used as osmotic power generators, these membranes produce an unprecedented output power density over 200 W m^-2 on mixing the artificial seawater and river water. This work opens up the application of porous monolayer membranes with an atomically precise structure in osmotic power generation.

Pervaporation-assisted in situ formation of nanoporous microchannels with various material and structural properties

Nanoporous structures are crucial for developing mixed-scale micro-/nanofluidic devices because they facilitate the manipulation of molecule transport along the microfluidic channel networks. Particularly, self-assembled particles have been used for fabricating various nanoporous membranes. However, previous self-assembly mechanisms relied on the material and structural homogeneities of the nanopores. Here, we present a pervaporation-assisted in situ fabrication method that integrates nanoporous membrane structures into microfluidic devices. The microfluidic devices contain a control-channel layer at the top, which induces local and addressable pervaporation, and the main-channel layer, which is present at the bottom with pre-designated locations for nanoporous microchannels; the layers are separated using a gas-permeable film. The target particle suspensions are loaded into the main channels, and their pervaporation is controlled through the gas-permeable film, which successfully assembles the particles at the pre-designated locations. This method yields nanoporous microchannels with various material and structural properties by fabricating heterogeneous nanopore arrays/junctions in series and other diverse structures along the microchannels. We validate the basic working principle of microfluidic devices containing nanoporous microchannels. Furthermore, we theoretically analyze the fundamental experimental results, which suggest the remarkable potential of our strategy to fabricate nanopore networks without using conventional nanofabrication methods.

Ultrafast rectifying counter-directional transport of proton and metal ions in metal-organic framework-based nanochannels

Bioinspired control of ion transport at the subnanoscale has become a major focus in the fields of nanofluidics and membrane separation. It is fundamentally important to achieve rectifying ion-specific transport in artificial ion channels, but it remains a challenge. Here, we report a previously unidentified metal-organic framework nanochannel (MOF NC) nanofluidic system to achieve unidirectional ultrafast counter-directional transport of alkaline metal ions and proton. This highly effective ion-specific rectifying transport behavior is attributed to two distinct mechanisms for metal ions and proton, elucidated by theoretical simulations. Notably, the MOF NC exhibits ultrafast proton conduction stemming from ultrahigh proton mobility, i.e., 11.3 × 10^-7 m² /V·s, and low energy barrier of 0.075 eV in MIL-53-COOH subnanochannels. Furthermore, the MOF NC shows excellent osmotic power-harvesting performance in reverse electrodialysis. This work expects to inspire further research into multifunctional biomimetic ion channels for advanced nanofluidics, biomimetics, and separation applications.

Observation of Interfacial Instability of an Ultrathin Water Film

We observed the instability of a few-nanometer-thick water film encapsulated inside a graphene nanoscroll using transmission electron microscopy. The film, that was left after recession of a meniscus, formed ripples along the length of the nanoscroll with a distance only 20%-44% of that predicted by the classical Plateau-Rayleigh instability theory. The results were explained by a theoretical analysis that incorporates the effect of the van der Waals interactions between the water film and the graphene layers. We derived important insights into the behavior of liquid under nanoscale confinement and in nanofluidic systems.

Mining Critical Metals from Seawater by Subnanostructured Membranes: Is It Viable?

The continuous demand for energy-critical elements such as lithium, cobalt, uranium and so on will soon exceed their availability increasing further their significance of geopolitical resources. Seawater is a relevant, not conventional source of critical metals. Synthetic membranes with subnanometer pores are the core of processes such as desalination for separating solutes from water. These membrane processes have achieved remarkable success at industrial level. However, state-of-the-art desalination membranes cannot selectively separate a single metal ion from a mixture of ions. In this review the challenges of membranes with subnanometer pores to selectivity discriminate among different metal ions are briefly discussed. The key points of the molecular-level mechanism that contribute to energy barrier for ions transport through subnanometer pores are highlighted to provide guidelines for the design of single-metal ion selective membranes.

Ionic Transport in Electrostatic Janus Membranes. An Explicit Solvent Molecular Dynamic Simulation

Janus, or two-sided, charged membranes offer promise as ionic current rectifiers. In such systems, pores consisting of two regions of opposite charge can be used to generate a current from a gradient in salinity. The efficiency of nanoscale Janus pores increases dramatically as their diameter becomes smaller. However, little is known about the underlying transport processes, particularly under experimentally accessible conditions. In this work, we examine the molecular basis for rectification in Janus nanopores using an applied electric field. Molecular simulations with explicit water and ions are used to examine the structure and dynamics of all molecular species in aqueous electrolyte solutions. For several macroscopic observables, the results of such simulations are consistent with experimental observations on asymmetric membranes. Our analysis reveals a number of previously unknown features, including a pronounced local reorientation of water molecules in the pores, and a segregation of ionic species that had not been anticipated by previously reported continuum analyses of Janus pores. Using these insights, a model is proposed for ionic current rectification in which electric leakage at the pore entrance controls net transport.

How to produce confidence intervals instead of confidence tricks: Representative sampling for molecular simulations of fluid self-diffusion under nanoscale confinement

Ergodicity (or at least the tantalizing promise of it) is a core animating principle of molecular-dynamics (MD) simulations: Put simply, sample for long enough (in time), and you will make representative visits to states of a system all throughout phase space, consistent with the desired statistical ensemble. However, one is not guaranteed a priori that the chosen window of sampling in a production run is sufficiently long to avoid problematically non-ergodic observations; one is also not guaranteed that successive measurements of an observable are statistically independent of each other. In this paper, we investigate several particularly striking and troublesome examples of statistical correlations in MD simulations of nanoconfined fluids, which have profound implications on the quantification of uncertainty for transport phenomena in these systems. In particular, we show that these correlations can lead to confidence intervals on the fluid self-diffusion coefficient that are dramatically overconfident and estimates of this transport quantity that are simply inaccurate. We propose a simple approach—based on the thermally accelerated decorrelation of fluid positions and momenta—that ameliorates these issues and improves our confidence in MD measurements of nanoconfined fluid transport properties. We demonstrate that the formation of faithful confidence intervals for measurements of self-diffusion under nanoscale confinement typically requires at least 20 statistically independent samples, and potentially more depending on the sampling technique used.

How do interfaces alter the dynamics of supercooled water?

The structure of liquid water in the proximity of an interface can deviate significantly from that of bulk water, with surface-induced structural perturbations typically converging to bulk values at about ∼1 nm from the interface. While these structural changes are well established it is, in contrast, less clear how an interface perturbs the dynamics of water molecules within the liquid. Here, through an extensive set of molecular dynamics simulations of supercooled bulk and interfacial water films and nano-droplets, we observe the formation of persistent, spatially extended dynamical domains in which the average mobility varies as a function of the distance from the interface. This is in stark contrast with the dynamical heterogeneity observed in bulk water, where these domains average out spatially over time. We also find that the dynamical response of water to an interface depends critically on the nature of the interface and on the choice of interface definition. Overall these results reveal a richness in the dynamics of interfacial water that opens up the prospect of tuning the dynamical response of water through specific modifications of the interface structure or confining material.

Increased ion transport and high-efficient osmotic energy conversion through aqueous stable graphitic carbon nitride/cellulose nanofiber composite membrane

Increased attention has evoked on the utilization of renewable energy, particularly osmotic power as a potential solution to the energy crisis and environmental pollution. Herein, we fabricate graphitic carbon nitride (g-C₃N₄)/cellulose nanofiber (CNF) composite membranes with tailored lamellar nanochannels for capturing osmotic energy from salinity gradients. Composite membranes exhibiting charge-governed ion conductivity were prepared via co-homogenization of g-C₃N₄ with CNF and vacuum filtration. Ion conductivity was efficiently modulated by fine-tuning the charge density through controlling the weight content of CNF in the composite membranes. Higher ion conductivity of 0.014 S cm^-1 at low concentrations (<10^-2 M KCl) was achieved due to the increased charge density of the lamellar nanochannels and the excellent aqueous stability of the membranes. We demonstrate the potential of the composite membranes in nanofluidic osmotic energy conversion, displaying thermo-enhanced power output performance. This work could inspire new designs of cellulose-based nanofluidic devices for improved osmotic energy conversion.

Zwitterions Layer at but Do Not Screen Electrified Interfaces

The role of ionic electrostatics in colloidal processes is well-understood in natural and applied contexts; however, the electrostatic contribution of zwitterions, known to be present in copious amounts in extremophiles, has not been extensively explored. In response, we studied the effects of glycine as a surrogate zwitterion, ion, and osmolyte on the electrostatic forces between negatively charged mica-mica and silica-silica interfaces. Our results reveal that while zwitterions layer at electrified interfaces and contribute to solutions' osmolality, they do not affect at all the surface potentials, the electrostatic surface forces (magnitude and range), and solutions' ionic conductivity across 0.3-30 mM glycine concentration. We infer that the zwitterionic structure imposes an inseparability among positive and negative charges and that this inseparability prevents the buildup of a counter-charge at interfaces. These elemental experimental results pinpoint how zwitterions enable extremophiles to cope with the osmotic stress without affecting finely tuned electrostatic force balance.

Thin Film Fabrication by Pulsed Laser Deposition from TiO2 Targets in O2, N2, He, or Ar for Dye-Sensitized Solar Cells

Active semiconductor layers of TiO2 were synthesized via pulsed laser deposition in He, N2, O2, or Ar to manufacture DSSC structures. As-prepared nanostructured TiO2 coatings grown on FTO were photosensitized by the natural absorption of the N719 (Ruthenium 535-bis TBA) dye to fabricate photovoltaic structures. TiO2 photoanode nanostructures with increased adsorption areas of the photosensitizer (a combination with voluminous media) were grown under different deposition conditions. Systematic SEM, AFM, and XRD investigations were carried out to study the morphological and structural characteristics of the TiO2 nanostructures. It was shown that the gas nature acts as a key parameter of the architecture and the overall performance of the deposited films. The best electro-optical performance was reached for photovoltaic structures based on TiO2 coatings grown in He, as was demonstrated by the short-circuit current (Isc) of 5.40 mA, which corresponds to the higher recorded roughness (of 44 ± 2.9 nm RMS). The higher roughness is thus reflected in a more efficient and deeper penetration of the dye inside the nanostructured TiO2 coatings. The photovoltaic conversion efficiency (η) was 1.18 and 2.32% for the DSSCs when the TiO2 coatings were deposited in O2 and He, respectively. The results point to a direct correlation between the electro-optical performance of the prepared PV cells, the morphology of the TiO2 deposited layers, and the crystallinity features, respectively.

Aligned Stacking of Nanopatterned 2D Materials for High-Resolution 3D Device Fabrication

Two-dimensional materials can be combined by placing individual layers on top of each other, so that they are bound only by their van der Waals interaction. The sequence of layers can be chosen arbitrarily, enabling an essentially atomic-level control of the material and thereby a wide choice of properties along one dimension. However, simultaneous control over the structure in the in-plane directions is so far still rather limited. Here, we combine spatially controlled modifications of 2D materials, using focused electron irradiation or electron beam induced etching, with the layer-by-layer assembly of van der Waals heterostructures. The presented assembly process makes it possible to structure each layer with an arbitrary pattern prior to the assembly into the heterostructure. Moreover, it enables a stacking of the layers with accurate lateral alignment, with an accuracy of currently 10 nm, under observation in an electron microscope. Together, this enables the fabrication of almost arbitrary 3D structures with highest spatial resolution.

Fluctuation-induced quantum friction in nanoscale water flows

The flow of water in carbon nanochannels has defied understanding thus far¹, with accumulating experimental evidence for ultra-low friction, exceptionally high water flow rates and curvature-dependent hydrodynamic slippage^2-5. In particular, the mechanism of water-carbon friction remains unknown⁶, with neither current theories⁷ nor classical^8,9 or ab initio molecular dynamics simulations¹⁰ providing satisfactory rationalization for its singular behaviour. Here we develop a quantum theory of the solid-liquid interface, which reveals a new contribution to friction, due to the coupling of charge fluctuations in the liquid to electronic excitations in the solid. We expect that this quantum friction, which is absent in Born-Oppenheimer molecular dynamics, is the dominant friction mechanism for water on carbon-based materials. As a key result, we demonstrate a marked difference in quantum friction between the water-graphene and water-graphite interface, due to the coupling of water Debye collective modes with a thermally excited plasmon specific to graphite. This suggests an explanation for the radius-dependent slippage of water in carbon nanotubes⁴, in terms of the electronic excitations of the nanotubes. Our findings open the way for quantum engineering of hydrodynamic flows through the electronic properties of the confining wall.

Photoactivated Bacteriorhodopsin/SiNx Nanopore-Based Biological Nanofluidic Generator with Single-Protein Sensitivity

Nanofluidics is an emerging hot field that explores the unusual behaviors of ions/molecules transporting through nanoscale channels, which possesses a broad application prospect. However, in situ probing bioactivity of functional proteins on a single-molecule level by a nanofluidic device has not been reported, and it is still a big challenge in the field. Herein, we reported a biological nanofluidic device with a single-protein sensitivity, based on natural proton-pumping protein, bacteriorhodopsin (bR), and a single SiNx nanopore. Nanofluidic single-molecule probing of bR proton-pumping activity and its light response were achieved under applied voltage of 0 V, by biologically self-powered steady-state ionic current nanopore sensing. Green-light irradiation of the device led to the monitoring of a steady-state proton current of ∼3.51 pA/per bR trimer, corresponding to charge density of 815 μC/cm² generated by each bR monomer, which far exceeded the previously reported value of 1.4 μC/cm². This finding and method would promote the development of artificial biological and hybrid nanofluidic devices in biosensing and energy conversion applications.

The energetic barrier to single-file water flow through narrow channels

Various nanoscopic channels of roughly equal diameter and length facilitate single-file diffusion at vastly different rates. The underlying variance of the energetic barriers to transport is poorly understood. First, water partitioning into channels so narrow that individual molecules cannot overtake each other incurs an energetic penalty. Corresponding estimates vary widely depending on how the sacrifice of two out of four hydrogen bonds is accounted for. Second, entropy differences between luminal and bulk water may arise: additional degrees of freedom caused by dangling OH-bonds increase entropy. At the same time, long-range dipolar water interactions decrease entropy. Here, we dissect different contributions to Gibbs free energy of activation, ΔG ^‡, for single-file water transport through narrow channels by analyzing experimental results from water permeability measurements on both bare lipid bilayers and biological water channels that (i) consider unstirred layer effects and (ii) adequately count the channels in reconstitution experiments. First, the functional relationship between water permeabilities and Arrhenius activation energies indicates negligible differences between the entropies of intraluminal water and bulk water. Second, we calculate ΔG ^‡ from unitary water channel permeabilities using transition state theory. Plotting ΔG ^‡ as a function of the number of H-bond donating or accepting pore-lining residues results in a 0.1 kcal/mol contribution per residue. The resulting upper limit for partial water dehydration amounts to 2 kcal/mol. In the framework of biomimicry, our analysis provides valuable insights for the design of synthetic water channels. It thus may aid in the urgent endeavor towards combating global water scarcity.

Nonlinear electrohydrodynamic ion transport in graphene nanopores

Mechanosensitivity is one of the essential functionalities of biological ion channels. Synthesizing an artificial nanofluidic system to mimic such sensations will not only improve our understanding of these fluidic systems but also inspire applications. In contrast to the electrohydrodynamic ion transport in long nanoslits and nanotubes, coupling hydrodynamical and ion transport at the single-atom thickness remains challenging. Here, we report the pressure-modulated ion conduction in graphene nanopores featuring nonlinear electrohydrodynamic coupling. Increase of ionic conductance, ranging from a few percent to 204.5% induced by the pressure—an effect that was not predicted by the classical linear coupling of molecular streaming to voltage-driven ion transport—was observed experimentally. Computational and theoretical studies reveal that the pressure sensitivity of graphene nanopores arises from the transport of capacitively accumulated ions near the graphene surface. Our findings may help understand the electrohydrodynamic ion transport in nanopores and offer a new ion transport controlling methodology.

Beyond the Pore Size Limitation of a Nanoporous Graphene Monolayer Membrane for Water Desalination Assisted by an External Electric Field

One efficient strategy for addressing the global water shortage is advanced membrane separation, which depends on the precise pore size being close to the hydrated ion size and other surface properties like charge and polarity. However, it is very difficult to fabricate uniform pores with diameters of <1 nm on monolayer membranes. By applying an electric field (bias voltage) perpendicular to the direction of the pressure difference, herein we demonstrate for the first time that a monolayer nanoporous graphene membrane with pores much larger than hydrated ions exhibits high salt rejection and allows a high rate of water transport. This theoretical proposal goes beyond the pore size limitation and shows promise for the design of high-performance reverse osmosis membranes.

Dielectric response of thin water films: a thermodynamic perspective

The surface of a polar liquid presents a special environment for the solvation and organization of charged solutes, which differ from bulk behaviors in important ways. These differences have motivated many attempts to understand electrostatic response at aqueous interfaces in terms of a spatially varying dielectric permittivity, typically concluding that the dielectric constant of interfacial water is significantly lower than in the bulk liquid. Such analyses, however, are complicated by the potentially nonlocal nature of dielectric response over the short length scales of interfacial heterogeneity. Here we circumvent this problem for thin water films by adopting a thermodynamic approach. Using molecular simulations, we calculate the solvent's contribution to the reversible work of charging a parallel plate capacitor. We find good agreement with a simple dielectric continuum model that assumes bulk dielectric permittivity all the way up to the liquid's boundary, even for very thin (∼1 nm) films. This comparison requires careful attention to the placement of dielectric boundaries between liquid and vapor, which also resolves apparent discrepancies with dielectric imaging experiments.

Free energy calculations from molecular simulations reveal that water's interfacial dielectric response is well-described by bulk properties.

Fabrication of Nanoscale Gas-Liquid Interfaces in Hydrophilic/Hydrophobic Nanopatterned Nanofluidic Channels

Gas-liquid interfaces (GLIs) are ubiquitous and have found widespread applications in a large variety of fields. Despite the recent trend of downscaling GLIs, their nanoscale fabrication remains challenging because of the lack of suitable tools. In this study, a nanofluidic device, which has undergone precise local surface modification, is used in combination with tailored physicochemical effects in nanospace and optimized nanofluidic operations, to produce uniform, arrayable, stable, and transportable nanoscale GLIs that can concentrate molecules of interest at the nanoscale. This approach provides a delicate nanofluidic mechanism for downscaling gas-liquid interfaces to the nanometer scale, thus opening up a new avenue for gas-liquid interface studies and applications.

Microfluidic Evaporation, Pervaporation, and Osmosis: From Passive Pumping to Solute Concentration

Evaporation, pervaporation, and forward osmosis are processes leading to a mass transfer of solvent across an interface: gas/liquid for evaporation and solid/liquid (membrane) for pervaporation and osmosis. This Review provides comprehensive insight into the use of these processes at the microfluidic scales for applications ranging from passive pumping to the screening of phase diagrams and micromaterials engineering. Indeed, for a fixed interface relative to the microfluidic chip, these processes passively induce flows driven only by gradients of chemical potential. As a consequence, these passive-transport phenomena lead to an accumulation of solutes that cannot cross the interface and thus concentrate solutions in the microfluidic chip up to high concentration regimes, possibly up to solidification. The purpose of this Review is to provide a unified description of these processes and associated microfluidic applications to highlight the differences and similarities between these three passive-transport phenomena.

Ionic Transport Triggered by Asymmetric Illumination on 2D Nano-Membrane

Ionic transport and ion sieving are important in the field of separation science and engineering. Based on the rapid development of nanomaterials and nano-devices, more and more phenomena occur on the nanoscale devices in the field of thermology, optics, mechanics, etc. Recently, we experimentally observed a novel ion transport phenomenon in nanostructured graphene oxide membrane (GOM) under asymmetric illumination. We first build a light-induced carriers’ diffusion model based on our previous experimental results. This model can reveal the light-induced ion transport mechanism and predict the carriers’ diffusion behavior under different operational situations and material characters. The voltage difference increases with the rise of illuminate asymmetry, photoresponsivity, recombination coefficient, and carriers’ diffusion coefficient ratio. Finally, we discuss the ion transport behavior with different surface charge densities using MD simulation. Moderate surface charge decreases the ion transport with the same type of charge due to the electrostatic repulsion; however, excess surface charge blocks both cation and anion because a thicker electrical double layer decreases effective channel height. Research here provides referenced operational and material conditions to obtain a greater voltage difference between the membrane sides. Also, the mechanism of ion transport and ion sieving can guide us to modify membrane material according to different aims.

Oriented Two-Dimensional Covalent Organic Framework Membranes with High Ion Flux and Smart Gating Nanofluidic Transport

Nanofluidic ion transport holds high promise in bio-sensing and energy conversion applications. However, smart nanofluidic devices with high ion flux and modulable ion transport capabilities remain to be realised. Herein, we demonstrate smart nanofluidic devices based on oriented two-dimensional covalent organic framework (2D COF) membranes with vertically aligned nanochannel arrays that achieved a 2-3 orders of magnitude higher ion flux compared with that of conventional single-channel nanofluidic devices. The surface-charge-governed ion conductance is dominant for electrolyte concentration up to 0.01 M. Moreover, owing to the customisable pH-responsivity of imine and phenol hydroxyl groups, the COF-DT membranes attained an actively modulable ion transport with a high pH-gating on/off ratio of ≈100. The customisable structure and rich chemistry of COF materials will offer a promising platform for manufacturing nanofluidic devices with modifiable ion/molecular transport features.

Conditions for electroneutrality breakdown in nanopores

It has recently been suggested that a breakdown of electroneutrality occurs in highly confined nanopores that are encompassed by a dielectric material. This work elucidates the conditions for this breakdown. We show that the breakdown within the pore results from the response of the electric field within the dielectric. Namely, we show that this response is highly sensitive to the boundary condition at the dielectric edge. The standard Neumann boundary condition of no-flux predicts that the breakdown does not occur. However, a Dirichlet boundary condition for a zero-potential predicts a breakdown. Within this latter scenario, the breakdown exhibits a dependence on the thickness of the dielectric material. Specifically, infinite thickness dielectrics do not exhibit a breakdown, while dielectrics of finite thickness do exhibit a breakdown. Numerical simulations confirm theoretical predictions. The breakdown outcomes are discussed with regard to single pore systems and multiple pore systems.

Reduced Ionic Conductivity but Enhanced Local Ionic Conductivity in Nanochannels

The ionic transport in nanoscale channels with the critical size comparable to ions and solvents shows excellent performance on electrochemical desalination, ion separation, and supercapacitors. However, the key quantity ionic conductivity (σ) in the nanochannel that evaluates how easily the electric current is driven by an external voltage is still unknown because of the challenges in experimental measurement. In this work, we present an atomistic simulation-based study, which shows that how the ion concentration, nanoconfinement, and heterogeneous solvation modify the ionic conductivity in a two-dimensional graphene nanochannel. We find that σ in the confined channel is lower than that in the bulk (σ_b) at the same concentration along with enhanced ion-ion correlation. However, surprisingly, the local σ near the channel wall is more conductive than σ_b and is about 2-3 folds of the inner layer due to the highly concentrated charge carriers. Based on the layered feature of σ along the width of the channel, we propose a model that contains two dead (or depletion) layers, two highly conductive layers, and one inner layer to describe the ionic dynamics in the nanochannels. Our findings may open the way to unique nanofluidic functionalities, such as energy harvesting/storage and controlling transport at single-molecule and ion levels using the liquid layer near the wall.

Exponential Increase in an Ionic Signal: A Dominant Role of the Space Charge Effect on the Outer Surface of Nanochannels

Nanochannels have advantage in sensitive analyses due to the confinement effects on ionic signal in nano- or sub-nanometric confines but could realize further gains by optimizing signal mechanism. Making target recognitions on the outer surface of nanochannels has been verified to improve target recognitions and signal conversions by maximizing surfaces accessible to targets and ions, but until recently, the signal mechanism has been still unclear. Using electroneutral peptide nucleic acid (PNA) and negative-charged DNA, we verified a dominant space charge effect on an ionic signal on the outer surface of nanochannels. A typical exponential increase of the ionic signal with the charge density on the outer surface has been demonstrated through the PNA-PNA, PNA-DNA, DNA-DNA hybrid, DNA cleavage, and hybridization chain reaction. These results challenge the essential role of steric hindrance on the ionic signal and describe a new ion passageway surrounded and accelerated by the stern layer of charged species on the nanochannel outer surface.

Interfacial Super-Assembly of Ordered Mesoporous Carbon-Silica/AAO Hybrid Membrane with Enhanced Permselectivity for Temperature- and pH-Sensitive Smart Ion Transport

Nanofluidic devices have been widely used for diode-like ion transport and salinity gradients energy conversion. Emerging reverse electrodialysis (RED) nanofluidic systems based on nanochannel membrane display great superiority in salinity gradient energy harvesting. However, the imbalance between permeability and selectivity limits their practical application. Here, a new mesoporous carbon-silica/anodized aluminum (MCS/AAO) nanofluidic device with enhanced permselectivity for temperature- and pH-regulated energy generation was obtained by interfacial super-assembly method. A maximum power density of 5.04 W m^-2 is achieved, and a higher performance can be obtained by regulating temperature and pH. Theoretical calculations are further implemented to reveal the mechanism for ion rectification, ion selectivity and energy conversion. Results show that the MCS/AAO hybrid membrane has great superiority in diode-like ion transport, temperature- and pH-regulated salinity gradient energy conversion.

Revealing Ionic Signal Enhancement with Probe Grafting Density on the Outer Surface of Nanochannels

Probe-modified nanopores/nanochannels are one of the most advanced sensors because the probes interact strongly with ions and targets in nanoconfinement and create a sensitive and selective ionic signal. Recently, ionic signals have been demonstrated to be sensitive to the probe-target interaction on the outer surface of nanopores/nanochannels, which can offer more open space for target recognition and signal conversion than nanoconfined cavities. To enhance the ionic signal, we investigated the effect of grafting density, a critical parameter of the sensing interface, of the probe on the outer surface of nanochannels on the change rate of the ionic signal before and after target recognition (β). Electroneutral peptide nucleic acids and negatively charged DNA are selected as probes and targets, respectively. The experimental results showed that when adding the same number of targets, the β value increased with the probe grafting density on the outer surface. A theoretical model with clearly defined physical properties of each probe and target has been established. Numerical simulations suggest that the decrease of the background current and the aggregation of targets at the mouth of nanochannels with increasing probe grafting density contribute to this enhancement. This work reveals the signal mechanism of probe-target recognition on the outer surface of nanochannels and suggests a general approach to the nanochannel/nanopore design leading to sensitivity improvement on the basis of relatively good selectivity.

Distinct Chemistries Explain Decoupling of Slip and Wettability in Atomically Smooth Aqueous Interfaces

Despite essentially identical crystallography and equilibrium structuring of water, nanoscopic channels composed of hexagonal boron nitride and graphite exhibit an order-of-magnitude difference in fluid slip. We investigate this difference using molecular dynamics simulations, demonstrating that its origin is in the distinct chemistries of the two materials. In particular, the presence of polar bonds in hexagonal boron nitride, absent in graphite, leads to Coulombic interactions between the polar water molecules and the wall. We demonstrate that this interaction is manifested in a large typical lateral force experienced by a layer of oriented hydrogen atoms in the vicinity of the wall, leading to the enhanced friction in hexagonal boron nitride. The fluid adhesion to the wall is dominated by dispersive forces in both materials, leading to similar wettabilities. Our results rationalize recent observations that the difference in frictional characteristics of graphite and hexagonal boron nitride cannot be explained on the basis of the minor differences in their wettabilities.

Continuous Water Filling in a Graphene Nanochannel: A Molecular Dynamics Study

Low dimensional materials especially carbon materials hold high promise in the fields of water purification, mineral separation, energy harvesting/conversion, and so on. The fluidic devices fabricated by direct synthesis, lithography, or self-assembly of low dimensional materials provide opportunities for exploring the novel properties and applications of nanoconfined transport. Here, continuous filling of water and acetone molecules into a graphene nanochannel is investigated. A stairlike nonlinear dependence of the number of filling water molecules on interlayer distance d is found when d < 1 nm due to the existence of out-plane layered and in-plane ordered monolayer structure, while near-linear dependence is found for acetone because of the freely rotating configurations along with varying d during the filling process. The entropy, potential energy, and free energy of the confined system during the continuous filling are analyzed to understand the structural evolution of water. The energy-costs are discussed depending on the structure evolution of water during the filling, which is crucial to understanding the swelling and capillary condensation widely existing in the angstrom/nanometer-scale separation membranes.

Molecular size-dependent subcontinuum solvent permeation and ultrafast nanofiltration across nanoporous graphene membranes

Selective solvent and solute transport across nanopores is fundamental to membrane separations, yet it remains poorly understood, especially for non-aqueous systems. Here, we design a chemically robust nanoporous graphene membrane and study molecular transport in various organic liquids under subnanometre confinement. We show that the nature of the solvent can modulate solute diffusion across graphene nanopores, and that breakdown of continuum flow occurs when pore size approaches the solvent's smallest molecular cross-section. By holistically engineering membrane support, modelling pore creation and defect management, high rejection and ultrafast organic solvent nanofiltration of dye molecules and separation of hexane isomers are achieved. The membranes exhibit stable fluxes across a range of solvents, consistent with flow across rigid pores whose size is independent of the solvent. These results demonstrate that nanoporous graphene is a rich materials system for controlling subcontinuum flow that could enable new membranes for a range of challenging separation needs.

Anomalous mechanosensitive ion transport in nanoparticle-blocked nanopores

Living organisms can sense extracellular forces via mechanosensitive ion channels, which change their channel conformations in response to external pressure and regulate ion transport through the cell membrane. Such pressure-regulated ion transport is critical for various biological processes, such as cellular turgor control and hearing in mammals, but has yet to be achieved in artificial systems using similar mechanisms. In this work, we construct a nanoconfinement by reversibly blocking a single nanopore with a nanoparticle and report anomalous and ultra-mechanosensitive ionic transport across the resulting nanoconfinement upon assorted mechanical and electrical stimuli. Our observation reveals a suppressed ion conduction through the system as the applied pressure increases, which imitates certain behaviors of stretch-inactivated ion channels in biological systems. Moreover, pressure-induced ionic current rectification is also observed despite the high ionic concentration of the solution. Using a combined experimental and simulation study, we correlate both phenomena to pressure-induced nanoparticle rotation and the resulting physical structure change in the blocked nanopore. This work presents a mechanosensitive nano-confinement requiring minimal fabrication techniques and provides new opportunities for bio-inspired nanofluidic applications.

Electrostatic gating of ion transport in carbon nanotube porins: A modeling study

Carbon nanotube porins (CNTPs) are biomimetic membrane channels that demonstrate excellent biocompatibility and unique water and ion transport properties. Gating transport in CNTPs with external voltage could increase control over ion flow and selectivity. Herein, we used continuum modeling to probe the parameters that enable and further affect CNTP gating efficiency, including the size and composition of the supporting lipid membrane, slip flow in the carbon nanotube, and the intrinsic electronic properties of the nanotube. Our results show that the optimal gated CNTP device consists of a semiconducting CNTP inserted into a small membrane patch containing an internally conductive layer. Moreover, we demonstrate that the ionic transport modulated by gate voltages is controlled by the charge distribution along the CNTP under the external gate electric potential. The theoretical understanding developed in this study offers valuable guidance for the design of gated CNTP devices for nanofluidic studies, novel biomimetic membranes, and cellular interfaces in the future.

Modeling of emergent memory and voltage spiking in ionic transport through angstrom-scale slits

Recent advances in nanofluidics have enabled the confinement of water down to a single molecular layer. Such monolayer electrolytes show promise in achieving bioinspired functionalities through molecular control of ion transport. However, the understanding of ion dynamics in these systems is still scarce. Here, we develop an analytical theory, backed up by molecular dynamics simulations, that predicts strongly nonlinear effects in ion transport across quasi-two-dimensional slits. We show that under an electric field, ions assemble into elongated clusters, whose slow dynamics result in hysteretic conduction. This phenomenon, known as the memristor effect, can be harnessed to build an elementary neuron. As a proof of concept, we carry out molecular simulations of two nanofluidic slits that reproduce the Hodgkin-Huxley model and observe spontaneous emission of voltage spikes characteristic of neuromorphic activity.

Molecular Properties and Chemical Transformations Near Interfaces

The properties of bulk water and aqueous solutions are known to change in the vicinity of an interface and/or in a confined environment, including the thermodynamics of ion selectivity at interfaces, transition states and pathways of chemical reactions, and nucleation events and phase growth. Here we describe joint progress in identifying unifying concepts about how air, liquid, and solid interfaces can alter molecular properties and chemical reactivity compared to bulk water and multicomponent solutions. We also discuss progress made in interfacial chemistry through advancements in new theory, molecular simulation, and experiments.

Unidirectional ion transport in nanoporous carbon membranes with a hierarchical pore architecture

The transport of fluids in channels with diameter of 1-2 nm exhibits many anomalous features due to the interplay of several genuinely interfacial effects. Quasi-unidirectional ion transport, reminiscent of the behavior of membrane pores in biological cells, is one phenomenon that has attracted a lot of attention in recent years, e.g., for realizing diodes for ion-conduction based electronics. Although ion rectification has been demonstrated in many asymmetric artificial nanopores, it always fails in the high-concentration range, and operates in either acidic or alkaline electrolytes but never over the whole pH range. Here we report a hierarchical pore architecture carbon membrane with a pore size gradient from 60 nm to 1.4 nm, which enables high ionic rectification ratios up to 10⁴ in different environments including high concentration neutral (3 M KCl), acidic (1 M HCl), and alkaline (1 M NaOH) electrolytes, resulting from the asymmetric energy barriers for ions transport in two directions. Additionally, light irradiation as an external energy source can reduce the energy barriers to promote ions transport bidirectionally. The anomalous ion transport together with the robust nanoporous carbon structure may find applications in membrane filtration, water desalination, and fuel cell membranes.

Regional and functional division of functional elements of solid-state nanochannels for enhanced sensitivity and specificity of biosensing in complex matrices

Solid-state nanochannels (SSNs) provide a promising approach for biosensing due to the confinement of molecules inside, their great mechanical strength and diversified surface chemical properties; however, until now, their sensitivity and specificity have not satisfied the practical requirements of sensing applications, especially in complex matrices, i.e., media of diverse constitutions. Here, we report a protocol to achieve explicit regional and functional division of functional elements at the outer surface (FE_OS) and inner wall (FE_IW) of SSNs, which offers a nanochannel-based sensing platform with enhanced specificity and sensitivity. The protocol starts with the fabrication and characterization of the distribution of FE_OS and FE_IW. Then, the evaluation of the contributions of FE_OS and FE_IW to ionic gating is described; the FE_IW mainly regulate ionic gating, and the FE_OS can produce a synergistic effect. Finally, hydrophobic or highly charged FE_OS are applied to ward off interference molecules, non-target molecules that may affect the ionic signal of nanochannels, which decreases false signals and helps to achieve the highly specific ionic output in complex matrices. Compared with other methods currently available, this method will contribute to the fundamental understanding of substance transport in SSNs and provide high specificity and sensitivity in SSN-based analyses. The procedure takes 3-6 d to complete.

Light-Controlled Ionic Transport through Molybdenum Disulfide Membranes

In recent years, two-dimensional (2D) nanomaterials have been extensively explored in the field of nanofluidics due to their interconnected and well-controlled nanochannels. In particular, the investigation of 2D nanomaterials using their intrinsic properties for smart nanofluidics is receiving increased interest. Here, we report that MoS₂ membranes can be used for light-controlled nanofluidic applications based on their photoelectrical properties. We show that the MoS₂ membranes exhibit surface charge-governed ionic transport in NaCl and KCl solution without light illumination, while the ionic conductivity of the MoS₂ membranes is up to 2 orders of magnitude higher at low concentration solution than that in bulk solution. We also show that the ionic conductivity of the membranes is enhanced under light illumination at 405 and 635 nm and reversible and stable switching of ionic current upon light illumination is observed. In addition, ionic current through membranes is enhanced by increasing light intensity. Therefore, our findings demonstrate that MoS₂ membranes can be a potential platform for light-controlled nanofluidic applications.

Membrane Fouling Phenomena in Microfluidic Systems: From Technical Challenges to Scientific Opportunities

The almost ubiquitous, though undesired, deposition and accumulation of suspended/dissolved matter on solid surfaces, known as fouling, represents a crucial issue strongly affecting the efficiency and sustainability of micro-scale reactors. Fouling becomes even more detrimental for all the applications that require the use of membrane separation units. As a matter of fact, membrane technology is a key route towards process intensification, having the potential to replace conventional separation procedures, with significant energy savings and reduced environmental impact, in a broad range of applications, from water purification to food and pharmaceutical industries. Despite all the research efforts so far, fouling still represents an unsolved problem. The complex interplay of physical and chemical mechanisms governing its evolution is indeed yet to be fully unraveled and the role played by foulants' properties or operating conditions is an area of active research where microfluidics can play a fundamental role. The aim of this review is to explore fouling through microfluidic systems, assessing the fundamental interactions involved and how microfluidics enables the comprehension of the mechanisms characterizing the process. The main mathematical models describing the fouling stages will also be reviewed and their limitations discussed. Finally, the principal dynamic investigation techniques in which microfluidics represents a key tool will be discussed, analyzing their employment to study fouling.

On the molecular correlations that result in field-dependent conductivities in electrolyte solutions

Employing recent advances in response theory and nonequilibrium ensemble reweighting, we study the dynamic and static correlations that give rise to an electric field-dependent ionic conductivity in electrolyte solutions. We consider solutions modeled with both implicit and explicit solvents, with different dielectric properties, and at multiple concentrations. Implicit solvent models at low concentrations and small dielectric constants exhibit strongly field-dependent conductivities. We compare these results to Onsager-Wilson theory of the Wien effect, which provides a qualitatively consistent prediction at low concentrations and high static dielectric constants but is inconsistent away from these regimes. The origin of the discrepancy is found to be increased ion correlations under these conditions. Explicit solvent effects act to suppress nonlinear responses, yielding a weakly field-dependent conductivity over the range of physically realizable field strengths. By decomposing the relevant time correlation functions, we find that the insensitivity of the conductivity to the field results from the persistent frictional forces on the ions from the solvent. Our findings illustrate the utility of nonequilibrium response theory in rationalizing nonlinear transport behavior.