Performance Enhancement of Modified 3D SWCNT/RVC Electrodes Using Microwave-Irradiated Graphene Oxide

The goal of this article is to increase the electrode performance of 3D CNT/RVC electrodes by improving the ease of ion adsorption to and ion desorption from the electrode surfaces. This achievement was done by preparing different composites of synthesized microwave-irradiated graphene oxide (mwGO) with CNT and coated on RVC. The morphology of GO was examined by field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) study. Its surface property was checked by energy-dispersive X-ray spectra (EDX), and Fourier transform infrared spectra; whereas, for mwGO by XRD, Raman spectra, and X-ray photoelectron spectra (XPS), which revealed some structural changes of GO after irradiation, where CNTs, being sandwiched between graphene layers, built 3D highly porous architecture inside the electrodes. The electrochemical test of composite electrodes showed increased electrodes conductivity and afforded rapid ions diffusion. It is observed that the 9-CNT/mwGO/RVC composite electrode performed as the best electrode, which showed 29% increment in specific capacitance value compared to the normal CNT/RVC electrode. This best electrode also showed very high cyclic stability in its cyclic voltammetry test that maintained 97% current stability after 2000 cycles, indicating that the electrode can be an effective material for water purification technology.

Graphene Modified Multifunctional Personal Protective Clothing

Personal protective clothing is intended to protect the wearer from various hazards (mechanical, biological, chemical, thermal, radiological, etc.) and inhospitable environmental conditions that may cause harm or even death. There are various types of personal protective clothing, manufactured with different materials based on hazards and end user requirements. Conventional protective clothing has impediments such as high weight, bulky nature, lack of mobility, heat stress, low heat dissipation, high physical stress, diminishing dexterity, diminishing scope of vision, lack of breathability, and reduced protection against pathogens and hazards. By virtue of the superlative properties of graphene, fabrics modified with this material can be an effective means to overcome these limitations and to improve properties such as mechanical strength, antibacterial activity, flame resistance, conductivity, and UV resistance. The limitations of conventional personal protective equipment are discussed, followed by necessary measures which might be taken to improve personal protective equipment (PPE), the unique properties of graphene, methods of graphene incorporation in fabrics, and the current research status and potential of graphene-modified performance textiles relevant to PPE.

Investigation of the properties of nanographene in polymer nanocomposites through molecular simulations: dynamics and anisotropic Brownian motion

The dynamical behavior of nanographene sheets dispersed in polymer matrices is investigated through united-atom molecular dynamics simulations. The Brownian motion of the sheet and the anisotropy in its translational and orientational diffusion are the topics of the current study. Different polymer matrices and pristine and functionalized graphene constitute various nanocomposite systems. Interactions between the nanographene flake and the matrix determine the dynamics of the systems. The dynamics is reduced in polyethylene oxide compared to polyethylene matrix, whereas carboxylated sheets move considerably slower than the pristine nanographene in any matrix. Diffusion is anisotropic for short times, while it becomes isotropic in the long time limit. The in-plane motion of the nanographene sheet is faster than the out-of-plane component, in agreement with the diffusion of perfectly oblate ellipsoids. In functionalized graphene, the anisotropy is suppressed. By exploring the temperature effect on both the nanographene sheet and polymer close to the surface, indications for coupling in the motion of the two components are revealed. The strong effect of edge functional groups on the dynamics can be used as a way to control the Brownian motion of nanographene sheets in polymer nanocomposites and consequently tailor the properties of the materials.

Microcontact Printing with Laser Direct Writing Carbonization for Facile Fabrication of Carbon-Based Ultrathin Disk Arrays and Ordered Holey Films

A nanometer-thick carbon film with a highly ordered pattern structure is very useful in a variety of applications. However, its large-scale, high-throughput, and low-cost fabrication is still a great challenge. Herein, microcontact printing (µCP) and direct laser writing carbonization (DLWc) are combined to develop a novel method that enables ease of fabrication of nanometer-thick and regularly patterned carbon disk arrays (CDAs) and holey carbon films (HCFs) from a pyromellitic dianhydride-oxydianiline-based polyamic acid (PAA) solution. The effect of PAA concentration and pillar lattice structure of the polydimethyl siloxane stamp are systematically studied for their influence on the geometrical parameter, surface morphology, and chemical structure of the finally achieved CDAs and HCFs. Within the PAA concentration being investigated, the averaged thickness of CDAs and HCFs can be tailored in a range from a few tens to a few hundred of nanometers. The µCP+DLWc-enabled electrically conductive CDAs and HCFs possess the characteristics of ease-of-fabrication, nanometer-thickness, highly regular and controlled patterns and structures, and the ability to form on both hard and soft substrates, which imparts usefulness in electronics, photonics, energy storage, catalysis, tissue engineering, as well as physical, chemical, and bio-sensing applications.

Biotransformation of Pristine and Oxidized Carbon Nanotubes by the White Rot Fungus Phanerochaete chrysosporium

Carbon nanomaterials are widely studied and applied nowadays, with annual production increasing. After entering the environment, the complete degradation of these carbon nanomaterials by microorganisms is proposed as an effective approach for detoxification and remediation. In this study, we evaluated the degradation of pristine multiwalled carbon nanotubes (p-MWCNTs) and oxidized multiwalled carbon nanotubes (o-MWCNTs) by the white rot fungus Phanerochaete chrysosporium, which is a powerful decomposer in the carbon cycle and environmental remediation. Both p-MWCNTs and o-MWCNTs were partially oxidized by P. chrysosporium as indicated by the addition of oxygen atoms to the carbon skeleton in the forms of C=O and O-H bonds. The fungal oxidation led to the shortening of MWCNTs, where precipitated o-MWCNTs showed more short tubes. During the transformation, the defects on the tubes became detached from the carbon skeleton, resulting in decreases of the ID/IG (intensity of D-band/ intensity of G-band) values in Raman spectra. The transformation mechanism was attributed to the enzymatic degradation by laccase and manganese peroxidase excreted by P. chrysosporium. The results collectively indicated that MWCNTs could be transformed by P. chrysosporium, but complete degradation could not be achieved in a short time period. The implications on the environmental risks of carbon nanomaterials are discussed.

2D Crystal-Based Fibers: Status and Challenges

2D crystals are emerging new materials in multidisciplinary fields including condensed state physics, electronics, energy, environmental engineering, and biomedicine. To employ 2D crystals for practical applications, these nanoscale crystals need to be processed into macroscale materials, such as suspensions, fibers, films, and 3D macrostructures. Among these macromaterials, fibers are flexible, knittable, and easy to use, which can fully reflect the advantages of the structure and properties of 2D crystals. Therefore, the fabrication and application of 2D crystal-based fibers is of great importance for expanding the impact of 2D crystals. In this Review, 2D crystals that are successfully prepared are overviewed based on their composition of elements. Subsequently, methods for preparing 2D crystals, 2D crystals dispersions, and 2D crystal-based fibers are systematically introduced. Then, the applications of 2D crystal-based fibers, such as flexible electronic devices, high-efficiency catalysis, and adsorption, are also discussed. Finally, the status-of-quo, perspectives, and future challenges of 2D crystal-based fibers are summarized. This Review provides directions and guidelines for developing new 2D crystal-based fibers and exploring their potentials in the fields of smart wearable devices.

Graphene-based 3D scaffolds in tissue engineering: fabrication, applications, and future scope in liver tissue engineering

Tissue engineering embraces the potential of recreating and replacing defective body parts by advancements in the medical field. Being a biocompatible nanomaterial with outstanding physical, chemical, optical, and biological properties, graphene-based materials were successfully employed in creating the perfect scaffold for a range of organs, starting from the skin through to the brain. Investigations on 2D and 3D tissue culture scaffolds incorporated with graphene or its derivatives have revealed the capability of this carbon material in mimicking in vivo environment. The porous morphology, great surface area, selective permeability of gases, excellent mechanical strength, good thermal and electrical conductivity, good optical properties, and biodegradability enable graphene materials to be the best component for scaffold engineering. Along with the apt microenvironment, this material was found to be efficient in differentiating stem cells into specific cell types. Furthermore, the scope of graphene nanomaterials in liver tissue engineering as a promising biomaterial is also discussed. This review critically looks into the unlimited potential of graphene-based nanomaterials in future tissue engineering and regenerative therapy.

Effective Electrocatalytic Hydrogen Evolution in Neutral Medium Based on 2D MoP/MoS2 Heterostructure Nanosheets

The hydrogen evolution reaction (HER) in the neutral medium can avoid the problems caused by strong acid (bases) media and thus is promising for practical application. The suitable catalyst in the neutral medium for HER requires good conductivity for decreasing ohm resistance, porous structures for weakening diffusion resistance, and plentiful active sites, but its synthesis remains a challenge. Here, the 2D MoP/MoS₂ heterostructure nanosheets rather than common anion doping supported on carbon cloth (CC) was designed to meet the above criteria. The catalyst only needs a low overpotential of 96 mV to achieve a current density of 10 mA cm^-2 (η₁₀) for HER in the neutral medium (without iR correction), which is much lower than 199 mV of the bare MoS₂. The good performance is ascribed to plentiful active sites on the heterointerface of MoP/MoS₂ for activating H₂O, good conductivity of MoP and CC for electron transfer, and pores surrounded by MoP/MoS₂ facilitating mass transfer as shown by XPS and density functional theory calculations. The catalyst also exhibits outstanding activity in alkaline (η₁₀ of 54 mV) and acid (η₁₀ of 69 mV) media. The cells by coupling the MoP/MoS₂ cathode with a NiFe-LDH anode can deliver a current density of 10 mA cm^-2 at 1.51 V in 1 M KOH and 1.98 V in 1 M PBS. The effective overall water splitting can be driven by a solar panel (1.51 V), implying its ability to store solar energy as H₂ energy.

Direct Synthesis of cubic shaped Ag2S on Ni mesh as Binder-free Electrodes for Energy Storage Applications

A facile approach of chemical bath deposition was proposed to fabricate direct synthesis of silver sulphide (Ag₂S) on nickel (Ni) mesh without involvement for binders for supercapacitor electrodes. The phase purity, structure, composition, morphology, microstructure of the as-fabricated Ag₂S electrode was validated from its corresponding comprehensive characterization tools. The electrochemical characteristics of the Ag₂S electrodes were evaluated by recording the electrochemical measurements such as cyclic voltammetry and charge/discharge profile in a three electrode configuration system. Ag₂S employed as working electrode demonstrates notable faradaic behaviour including high reversible specific capacitance value of 179 C/g at a constant charge/discharge current density of 1 A/g with high cyclic stability which is relatively good as compared with other sulphide based materials. The experimental results ensure fabricated binder-free Ag₂S electrodes exhibits better electrochemical performance and suitable for potential electrodes in electrochemical energy storage applications.

Manganese dioxide nanosheets: from preparation to biomedical applications

Advancements in nanotechnology and molecular biology have promoted the development of a diverse range of models to intervene in various disorders (from diagnosis to treatment and even theranostics). Manganese dioxide nanosheets (MnO₂ NSs), a typical two-dimensional (2D) transition metal oxide of nanomaterial that possesses unique structure and distinct properties have been employed in multiple disciplines in recent decades, especially in the field of biomedicine, including biocatalysis, fluorescence sensing, magnetic resonance imaging and cargo-loading functionality. A brief overview of the different synthetic methodologies for MnO₂ NSs and their state-of-the-art biomedical applications is presented below, as well as the challenges and future perspectives of MnO₂ NSs.

Nucleobase-mediated synthesis of nitrogen-doped carbon nanozymes as efficient peroxidase mimics

Carbon nanozymes are catalytic carbon nanomaterials with intrinsic enzyme-like activities. They are advantageous over their natural counterparts in terms of higher stability, lower preparation cost, and better robustness. However, the peroxidase-like activities of the most developed carbon nanozymes were moderate due to the imperfection of active centers and limited tuning strategies. Herein, we designed a novel class of efficient peroxidase-mimicking carbon nanozymes with nitrogen atom doping. The N-doped carbon nanozymes were facilely synthesized by direct pyrolysis of different nucleobases at controlled temperatures without other treatments. A high ratio of nitrogen atoms was doped into the carbon skeleton. For example, 8.77 wt% of N remained in the guanine-derived carbon nanozyme with a pyrolysis temperature of 900 °C. The dominant graphitic N species greatly boosted the peroxidase-like activities of nucleobase-derived carbon nanozymes. Moreover, nucleobases are cheap, abundant, and environmentally friendly. We have demonstrated that nitrogen-rich nucleobases are ideal starting materials for the large-scale and cost-effective synthesis of N-doped carbon nanozymes. The carefully designed N-doped carbon nanozymes with superior activities were further used to construct effective biosensors for bioactive molecules (i.e., H2O2 and glucose). Highly sensitive and selective detection of H2O2 and glucose was achieved using the N-doped carbon nanozymes as efficient peroxidase mimics. This study offers an economical and sustainable approach for the scalable preparation of N-doped carbon nanozymes and creates a new path for the rational design of efficient peroxidase-mimicking carbon nanozymes by heteroatom doping.

Graphene Oxide Flakes Tune Excitatory Neurotransmission in Vivo by Targeting Hippocampal Synapses

Synapses compute and transmit information to connect neural circuits and are at the basis of brain operations. Alterations in their function contribute to a vast range of neuropsychiatric and neurodegenerative disorders and synapse-based therapeutic intervention, such as selective inhibition of synaptic transmission, may significantly help against serious pathologies. Graphene is a two-dimensional nanomaterial largely exploited in multiple domains of science and technology, including biomedical applications. In hippocampal neurons in culture, small graphene oxide nanosheets (s-GO) selectively depress glutamatergic activity without altering cell viability. Glutamate is the main excitatory neurotransmitter in the central nervous system and growing evidence suggests its involvement in neuropsychiatric disorders. Here we demonstrate that s-GO directly targets the release of presynaptic vesicle. We propose that s-GO flakes reduce the availability of transmitter, via promoting its fast release and subsequent depletion, leading to a decline ofglutamatergic neurotransmission. We injected s-GO in the hippocampus in vivo, and 48 h after surgery ex vivo patch-clamp recordings from brain slices show a significant reduction in glutamatergic synaptic activity in respect to saline injections.

α-Fe2 O3 Nanoparticles Decorated C@MoS2 Nanosheet Arrays with Expanded Spacing of (002) Plane for Ultrafast and High Li/Na-Ion Storage

MoS₂ nanosheets as a promising 2D nanomaterial have extensive applications in energy storage and conversion, but their electrochemical performance is still unsatisfactory as an anode for efficient Li⁺ /Na⁺ storage. In this work, the design and synthesis of vertically grown MoS₂ nanosheet arrays, decorated with graphite carbon and Fe₂ O₃ nanoparticles, on flexible carbon fiber cloth (denoted as Fe₂ O₃ @C@MoS₂ /CFC) is reported. When evaluated as an anode for lithium-ion batteries, the Fe₂ O₃ @C@MoS₂ /CFC electrode manifests an outstanding electrochemical performance with a high discharge capacity of 1541.2 mAh g^-1 at 0.1 A g^-1 and a good capacity retention of 80.1% at 1.0 A g^-1 after 500 cycles. As for sodium-ion batteries, it retains a high reversible capacity of 889.4 mAh g^-1 at 0.5 A g^-1 over 200 cycles. The superior electrochemical performance mainly results from the unique 3D ordered Fe₂ O₃ @C@MoS₂ array-type nanostructures and the synergistic effect between the C@MoS₂ nanosheet arrays and Fe₂ O₃ nanoparticles. The Fe₂ O₃ nanoparticles act as spacers to steady the structure, and the graphite carbon could be incorporated into MoS₂ nanosheets to improve the conductivity of the whole electrode and strengthen the integration of MoS₂ nanosheets and CFC by the adhesive role, together ensuring high conductivity and mechanical stability.

Peroxidase-like activity of palladium nanoparticles on hydrogen-bond supramolecular structures over a broader pH range and their application in glucose sensing

To circumvent the complicated natural peroxidases, palladium nanoparticles embedded in melamine cyanurate (MCA-Pd NPs) were synthesized. MCA-Pd NPs catalyzed the oxidation of ABTS2– by H2O2, and the solution turned green, which could be quantified via a typical absorption peak at 420 nm. MCA-Pd NPs had high peroxidase-like activity in a wider pH range than that of natural peroxidases. MCA-Pd NPs were used to develop a colorimetric sensor for H2O2 over the pH range of 7.0 to 11.0, which had same linear range, and their linear regression equations had similar slopes. Moreover, MCA-Pd NPs were applied to establish the biosensor for glucose by using glucose oxidase (GOx); it had a linear range of 5.0–120 μmol/L, with a linear regression equation of A = 0.04926 + 0.00536C (C: μmol/L, R = 0.9960) and a detection limit of 0.3 μmol/L (3σ/slope). When we applied it to detect glucose level in human blood, satisfactory results were obtained.

Scalable Production of Nanographene and Doping via Nondestructive Covalent Functionalization

A new method for top-down, one-pot, gram-scale production of high quality nanographene by incubating graphite in a dilute sodium hypochlorite solution at only 40 °C is reported here. The produced sheets have only 4 at% oxygen content, comparable with nanographene grown by chemical vapor deposition. The nanographene sheets are covalently functionalized using a nondestructive nitrene [2+1] cycloaddition reaction that preserves their π-conjugated system. Statistical analyses of Raman spectroscopy and X-ray photoelectron spectroscopy indicate a low number of sp³ carbon atoms on the order of 2% before and 4% after covalent functionalization. The nanographene sheets are significantly more conductive than conventionally prepared nanographene oxide, and conductivity further increases after covalent functionalization. The observed doping effects and theoretical studies suggest sp² hybridization for the carbon atoms involved in the [2+1] cycloaddition reaction leading to preservation of the π-conjugated system and enhancing conductivity via n-type doping through the bridging N-atom. These methods are easily scalable, which opens the door to a mild and efficient process to produce high quality nanographenes and covalently functionalize them while retaining or improving their physicochemical properties.

Edge-Functionalized Graphene Nanoplatelets as Metal-Free Electrocatalysts for Dye-Sensitized Solar Cells

A scalable and low-cost production of graphene nanoplatelets (GnPs) is one of the most important challenges for their commercialization. A simple mechanochemical reaction has been developed and applied to prepare various edge-functionalized GnPs (EFGnPs). EFGnPs can be produced in a simple and ecofriendly manner by ball milling of graphite with target substances (X = nonmetals, halogens, semimetals, or metalloids). The unique feature of this method is its use of kinetic energy, which can generate active carbon species by unzipping of graphitic CC bonds in dry conditions (no solvent). The active carbon species efficiently pick up X substance(s), leading to the formation of graphitic CX bonds along the broken edges and the delamination of graphitic layers into EFGnPs. Unlike graphene oxide (GO) and reduced GO (rGO), the preparation of EFGnPs does not involve toxic chemicals, such as corrosive acids and toxic reducing agents. Furthermore, the prepared EFGnPs preserve high crystallinity in the basal area due to their edge-selective functionalization. Considering the available edge X groups that can be selectively employed, the potential applications of EFGnPs are unlimited. In this context, the synthesis, characterizations, and applications of EFGnPs, specifically, as metal-free carbon-based electrocatalysts for dye-sensitized solar cells (DSSCs) in both cobalt and iodine electrolytes are reviewed.

Thermosensitive Microgels-Decorated Magnetic Graphene Oxides for Specific Recognition and Adsorption of Pb(II) from Aqueous Solution

Herein, we report a novel type of smart graphene oxide nanocomposites (MGO@PNB) with excellent magnetism and high thermosensitive ion-recognition selectivity of lead ions (Pb2+). The MGO@PNB are fabricated by immobilizing superparamagnetic Fe3O4 nanoparticles (NPs) and poly(N-isopropylacrylamide-co-benzo-18-crown-6 acrylamide) thermosensitive microgels (PNB) onto graphene oxide (GO) nanosheets using a simple one-step solvothermal method and mussel-inspired polydopamine chemistry. The PNB are composed of cross-linked poly(N-isopropylacrylamide) (PNIPAM) chains with numerous appended 18-crown-6 units. The 18-crown-6 units serve as hosts that can selectively recognize and capture Pb2+ from aqueous solution, and the PNIPAM chains act as a microenvironmental actuator for the inclusion constants of 18-crown-6/Pb2+ host-guest complexes. The loaded Fe3O4 NPs endow the MGO@PNB with convenient magnetic separability. The fabricated MGO@PNB demonstrate remarkably high ion-recognition selectivity of Pb2+ among the coexisting metal ions because of the formation of stable 18-crown-6/Pb2+ inclusion complexes. Most interestingly, the MGO@PNB show excellent thermosensitive adsorption ability toward Pb2+ due to the incorporation of PNIPAM functional chains on the GO. Further thermodynamic studies indicate that the adsorption of Pb2+ onto the MGO@PNB is a spontaneous and endothermic process. The adsorption kinetics and isotherm data can be well described by the pseudo-second-order kinetic model and the Langmuir isotherm model, respectively. Most importantly, the Pb2+-loaded MGO@PNB can be more easily regenerated by alternatively washing with hot/cold water than the commonly used regeneration methods. Such multifunctional graphene oxide nanocomposites could be used for specific recognition and removal of Pb2+ from water environment.

A reduced graphene oxide-titanium dioxide nanocomposite based electrochemical aptasensor for rapid and sensitive detection of Salmonella enterica

Recent foodborne outbreaks in multiple locations necessitate the continuous development of highly sensitive and specific biosensors that offer rapid detection of foodborne biological hazards. This work focuses on the development of a reduced graphene oxide‑titanium dioxide (rGO-TiO₂) nanocomposite based aptasensor to detect Salmonella enterica serovar Typhimurium. A label-free aptamer was immobilized on a rGO-TiO₂ nanocomposite matrix through electrostatic interactions. The changes in electrical conductivity on the electrode surface were evaluated using electroanalytical methods. DNA aptamer adsorbed on the rGO-TiO₂ surface bound to the bacterial cells at the electrode interface causing a physical barrier inhibiting the electron transfer. This interaction decreased the DPV signal of the electrode proportional to decreasing concentrations of the bacterial cells. The optimized aptasensor exhibited high sensitivity with a wide detection range (10⁸ to 10¹ cfu mL^-1), a low detection limit of 10¹ cfu mL^-1 and good selectivity for Salmonella bacteria. This rGO-TiO₂ aptasensor is an excellent biosensing platform that offers a reliable, rapid and sensitive alternative for foodborne pathogen detection.

Practical use of polymer brushes in sustainable energy applications: interfacial nanoarchitectonics for high-efficiency devices

The discovery and development of novel approaches, materials and manufacturing processes in the field of energy are compelling increasing recognition as a major challenge for contemporary societies. The performance and lifetime of energy devices are critically dependent on nanoscale interfacial phenomena. From the viewpoint of materials design, the improvement of current technologies inevitably relies on gaining control over the complex interface between dissimilar materials. In this sense, interfacial nanoarchitectonics with polymer brushes has seen growing interest due to its potential to overcome many of the limitations of energy storage and conversion devices. Polymer brushes offer a broad variety of resources to manipulate interfacial properties and gain molecular control over the synergistic combination of materials. Many recent examples show that the rational integration of polymer brushes in hybrid nanoarchitectures greatly improves the performance of energy devices in terms of power density, lifetime and stability. Seen in this light, polymer brushes provide a new perspective from which to consider the development of hybrid materials and devices with improved functionalities. The aim of this review is therefore to focus on what polymer brush-based solutions can offer and to show how the practical use of surface-grafted polymer layers can improve the performance and efficiency of fuel cells, lithium-ion batteries, organic radical batteries, supercapacitors, photoelectrochemical cells and photovoltaic devices.

Fungal transformation of graphene by white rot fungus Phanerochaete chrysosporium

The wide applications of graphene materials require the thorough investigation on their biosafety and environmental risks. Transformation of graphene materials is a fundamental issue in their environmental risk evaluations. The enzymatic degradation of graphene is widely reported using peroxidases, but the information on the fungal transformation of graphene is still unavailable. Herein, we incubated reduced graphene oxide (RGO) in the white rot fungus Phanerochaete chrysosporium culture system for 4 weeks and investigated the transformation of RGO by multiple techniques. P. chrysosporium efficiently added oxygen to RGO and decreased the its carbon contents accordingly. The I_D/I_G ratios of RGO showed statistically increases upon the transformation by P. chrysosporium according to Raman spectroscopy, suggesting the increase of defects on carbon skeleton. The negatively charged oxygen containing groups exfoliated the graphene sheets as indicated by the larger layer distance according to the X-ray diffraction spectra and the increased roughness under scanning electron microscopy. The transformation was more obvious in the RGO separated from the fungal balls than the precipitates in the culture medium. The mechanism of transformation was attributed to the enzymatic degradation by P. chrysosporium. The environmental implication of the fungal transformation of graphene materials and the potential of using fungi to reduce the environmental risks of graphene materials are discussed.

In vitro and in vivo studies of electroactive reduced graphene oxide-modified nanofiber scaffolds for peripheral nerve regeneration

Graphene, as a promising biomaterial, has received great attention in biomedical fields due to its intriguing properties, especially the conductivity and biocompatibility. Given limited studies on the effects of graphene-based scaffolds on peripheral nerve regeneration in vitro and in vivo under electrical stimulation (ES), the present study was intended to systematically investigate how conductive graphene-based nanofibrous scaffolds regulate Schwann cell (SC) behavior including migration, proliferation and myelination, and PC12 cell differentiation in vitro via ES, and whether these conductive scaffolds could guide SC migration and promote nerve regeneration in vivo. Briefly, the reduced graphene oxide (RGO) was coated onto ApF/PLCL nanofibrous scaffolds via in situ redox reaction of the graphene oxide (GO). In vitro, RGO-coated ApF/PLCL (AP/RGO) scaffolds significantly enhanced SC migration, proliferation, and myelination including myelin-specific gene expression and neurotrophic factor secretion. The conditioned media of SCs cultured on AP/RGO scaffolds under ES could induce the differentiation of PC12 cells in a separate culture. In addition, PC12 cells cultured on the conductive AP/RGO scaffolds also showed elevated differentiation upon ES. In vivo implantation of the conductive AP/RGO nerve guidance conduits into rat sciatic nerve defects exhibited a similar healing capacity to autograft, which is the current gold standard in peripheral nerve regeneration. In view of the performance of AP/RGO scaffolds in modulating cell functions in vitro and promoting nerve regeneration in vivo, it is expected that the graphene-based conductive nanofibrous scaffolds would exhibit their potential in peripheral nerve repair and regeneration. STATEMENT OF SIGNIFICANCE: Despite the demonstrated capability of bridging the distal and proximal peripheral nerves, it remains a significant challenge with current artificial nerve conduits to achieve the desired physiological functions, e.g., the transmission of electrical stimuli. Herein, we explored the possibility of combining the conductive properties of graphene with electrospun nanofiber to create the electroactive biomimetic scaffolds for nerve tissue regeneration. In vitro and in vivo studies were carried out: (1) In vitro, the conductive nanofibrous scaffolds significantly promoted SC migration, proliferation and myelination including myelin specific gene expression and neurotrophicfactor secretion, and induced PC12 cell differentiation with electrical stimulation. (2) In vivo, the conductive nerve guidance conduit exhibited similar effects with the gold standard autograft. In view of the performance of this conductive scaffold in modulating the cell functions in vitro and promoting nerve regeneration in vivo, it is expected that the graphene-modified nanofibrous scaffolds will exhibit their potential in peripheral nerve repair and regeneration.

Graphene-based aptasensors: from molecule-interface interactions to sensor design and biomedical diagnostics

Graphene-based nanomaterials have been widely utilized to fabricate various biosensors for environmental monitoring, food safety, and biomedical diagnostics. The combination of aptamers with graphene for creating biofunctional nanocomposites improved the sensitivity and selectivity of fabricated biosensors due to the unique molecular recognition and biocompatibility of aptamers. In this review, we highlight recent advances in the design, fabrication, and biomedical sensing application of graphene-based aptasensors within the last five years (2013-current). The typical studies on the biomedical fluorescence, colorimetric, electrochemical, electrochemiluminescence, photoelectrochemical, electronic, and force-based sensing of DNA, proteins, enzymes, small molecules, ions, and others are demonstrated and discussed in detail. More attention is paid to a few key points such as the conjugation of aptamers with graphene materials, the fabrication strategies of sensor architectures, and the importance of aptamers on improving the sensing performances. It is expected that this work will provide preliminary and useful guidance for readers to understand the fabrication of graphene-based biosensors and the corresponding sensing mechanisms in one way, and in another way will be helpful to develop novel high performance aptasensors for biological analysis and detection.

DNA-Templated In Situ Synthesis of Highly Dispersed AuNPs on Nitrogen-Doped Graphene for Real-Time Electrochemical Monitoring of Nitric Oxide Released from Live Cancer Cells

Dispersion promotion of nanomaterials can significantly enhance their catalytic activities. With a new DNA-templated in situ synthesis approach, we report the preparation of highly dispersed AuNPs on nitrogen-doped graphene sheets (NGS) with significantly improved electrocatalytic ability for the monitoring of nitric oxide (NO) released from live cancer cells. The template DNA is adsorbed on NGS via π-π stacking, and the Au precursor chelates along the DNA lattice through dative bonding. Subsequent introduction of the reducing agent leads to in situ nucleation and growth of AuNPs, eventually resulting in highly dispersed AuNPs on NGS. Because of the synergistic enhancement of the catalytic activities of AuNPs and NGS, as well as the high dispersion of AuNPs, such a nanocomposite shows significant electro-oxidation capability toward NO, leading to a highly sensitive subnanomolar detection limit for NO in vitro. More importantly, the laminin glycoproteins can be readily adsorbed on the surface of the nanomaterials to render excellent biocompatibility for the adhesion and proliferation of live cells, enabling the biointerface for electrochemical detection of NO released from live cancer cells.

Design and fabrication of carbon dots for energy conversion and storage

This review covers the recent advances of carbon dots for versatile energy-oriented applications.

Autonomously isolated pseudo-polyrotaxane nanosheets fabricated via hierarchically ordered supramolecular self-assembly

Autonomously isolated PPR nanosheets are fabricated via complexation between β-CD and a carboxyl-terminated poloxamer and the structural coloration was exhibited.

Preparation of large-area ultrathin carbon semiconductors converted from conjugated microporous polymer films

Two-dimensional carbon semiconductors have aroused great attention due to their unique structures and novel properties, showing potential applications in emerging electronic and optoelectronic devices. In this work, we reported an effective strategy to controllable prepare ultrathin carbon nanofilms (CNFs) by combining in situ-growth and stepwise thermal annealing, with the features of large-area, tunable properties and nanoscale thickness. The structures, morphologies and electrical properties of these as-prepared CNFs were characterized systematically. Impressively, tunable electrical properties from low to semi- and high conductivity could be precisely achieved through stepwise annealing of conjugated microporous polymer films. By introducing CNF-750 as the active channel layer, the transistor exhibited a typical p-type semiconductor property. Moreover, by further coupling CNF-750 with carbon dots (CDs) as a photoresponse layer, the as-fabricated all-carbon diode based on CDs/CNF-750 heterostructure film showed high ultraviolet (UV) light response.

Large-area carbon semiconductors were prepared by combining the in situ polymerization with thermal annealing process. Moreover, a photodetector based on carbon dots decorated carbon semiconductors was fabricated.

Extraction of hydrophobic analytes from organic solution into a titanate 2D-nanosheet host: Electroanalytical perspectives

Titanate nanosheets (single layer, typically 200 nm lateral size) deposited from aqueous colloidal solution onto electrode surfaces form lamellar hosts that bind redox active molecular redox probes. Here, hydrophobic redox systems such as anthraquinone, 1-amino-anthraquinone, deca-methylferrocene, 5,10,15,20-tetraphenyl-21H,23H-porphine manganese (III) chloride (TPPMnCl), and α-tocopherol are shown to bind directly from cyclopentanone solution (and from other types of organic solvents) into the titanate nanosheet film. For anthraquinone derivatives, stable voltammetric responses are observed in aqueous media consistent with 2-electron 2-proton reduction, however, independent of the pH of the outside solution phase environments. For decamethylferrocene a gradual decay of the voltammetric response is observed, but for TPPMnCl a more stable voltammetric signal is seen when immersed in chloride containing (NaCl) electrolyte. α-Tocopherol exhibits chemically irreversible oxidation and is detected with 1 mM–20 mM linear range and approximately 10⁻³ M concentration limit of detection. All redox processes exhibit an increase in current with increasing titanate film thickness and with increasing external electrolyte concentration. This and other observations suggest that important factors are analyte concentration and mobility within the titanate host, as well as ion exchange between titanate nanosheets and the outside electrolyte phase to maintain electroneutrality during voltammetric experiments. The lamellar titanate (with embedded tetrabutyl-ammonium cations) behaves like a hydrophobic host (for hydrophobic redox systems) similar to hydrophobic organic microphase systems. Potential for analytical applications is discussed.

•

Extraction of hydrophobic guest molecules (e.g. vitamin E) from organic solvents into titanate nanosheet deposits.

•

Redox processes at the electrode.|titanate interface coupled to ion exchange at the titanate|aqueous electrolyte interface

•

Transport phenomena in 2D-titanate nanosheet deposits disected into a redox layer and an ion transport layer.

•

Suppression of pH effects due to un-buffered conditions within the titanate nanosheet environment.

Electronic and Optical Properties of 2D Transition Metal Carbides and Nitrides (MXenes)

2D transition metal carbides, carbonitrides, and nitrides, known as MXenes, are a rapidly growing family of 2D materials with close to 30 members experimentally synthesized, and dozens more studied theoretically. They exhibit outstanding electronic, optical, mechanical, and thermal properties with versatile transition metal and surface chemistries. They have shown promise in many applications, such as energy storage, electromagnetic interference shielding, transparent electrodes, sensors, catalysis, photothermal therapy, etc. The high electronic conductivity and wide range of optical absorption properties of MXenes are the key to their success in the aforementioned applications. However, relatively little is currently known about their fundamental electronic and optical properties, limiting their use to their full potential. Here, MXenes' electronic and optical properties from both theoretical and experimental perspectives, as well as applications related to those properties, are discussed, providing a guide for researchers who are exploring those properties of MXenes.

Electrically Conductive and Mechanically Strong Graphene/Mullite Ceramic Composites for High-Performance Electromagnetic Interference Shielding

Ceramic composites with good electrical conductivity and high strength that can provide electromagnetic interference (EMI) shielding are highly desirable for the applications in harsh environment. In this study, lightweight, highly conductive, and strong mullite composites incorporated with reduced graphene oxide (rGO) are successfully fabricated by spark plasma sintering at merely 1200 °C using the core-shell structured γ-Al₂O₃@SiO₂ powder as a precursor. The transient viscous sintering induced by the γ-Al₂O₃@SiO₂ precursor not only prohibits the reaction between mullite and rGO by greatly reducing the sintering temperature, but also induces a highly anisotropic structure in the rGO/mullite composite, leading to an extremely high in-plane electrical conductivity (696 S m^-1 for only 0.89 vol % of rGO) and magnitude lower cross-plane electrical conductivity in the composites. As a result, very large loss tangent and EMI shielding effectiveness (>32 dB) can be achieved in the whole K band with extremely low rGO loading (less than 1 vol %), which is beneficial to maintain a good mechanical performance in ceramic matrix composites. Accordingly, the rGO/mullite composites show greatly improved strength and toughness when the rGO content is not high, which enables them to be applied as highly efficient EMI shielding materials while providing excellent mechanical performance.

Facile reduction of graphene oxide suspensions and films using glass wafers

This paper reports a facile and green method for conversion of graphene oxide (GO) into graphene by low-temperature heating (80 °C) in the presence of a glass wafer. Compared to conventional GO chemical reduction methods, the presented approach is easy-scalable, operationally simple, and based on the use of a non-toxic recyclable deoxygenation agent. The efficiency of the proposed method is further expanded by the fact that it can be applied for reducing both GO suspensions and large-scale thin films formed on various substrates prior to the reduction process. The quality of the obtained reduced graphene oxide (rGO) strongly depends on the type of the used glass wafer, and, particularly, magnesium silicate glass can provide rGO with the C/O ratio of 7.4 and conductivity of up to 33000 S*cm^-1. Based on the data obtained, we have suggested a mechanism of the observed reduction process in terms of the hydrolysis of the glass wafer with subsequent interaction of the leached alkali and alkali earth cations and silicate anions with graphene oxide, resulting in elimination of the oxygen-containing groups from the latter one. The proposed approach can be efficiently used for low-cost bulk-quantity production of graphene and graphene-based materials for a wide field of applications.

Controllable n-Fe2O3@graphene nanomaterials by ALD applied in an aptasensor with enhanced electrochemical performance for thrombin detection

An elegant atomic layer deposition (ALD) method has been employed for the controllable preparation of a uniform Fe₂O₃-coated graphene nanostructure (Fe₂O₃@graphene). The Fe₂O₃ coating thickness of the Fe₂O₃@graphene nanostructure can be tuned by varying the cycle number of Fe₂O₃ ALD. The produced Fe₂O₃@graphene composites are characterized by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy and cyclic voltammetry (CV). It is revealed that Fe₂O₃ is effectively deposited on the surface of graphene. Combined with the high affinity and specificity of an aptamer, a simple, rapid and sensitive electrochemical aptasensor was successfully fabricated for thrombin detection. The resulting electrochemical aptasensor displays a linear response to thrombin in the 1.0 × 10^-11 to 4.0 × 10^-9 M concentration range with the detection limit of 1.0 × 10^-12 M (at an S/N of 3). The described controllable multifunctional graphene nanomaterials from ALD are expected to be applied in a biosensing platform which will exhibit wide applications in biological, medical, and environmental fields.

MnO2 Nanosheet-based Fluorescence Sensing Platform for Sensitive Detection of Endonuclease

A novel fluorescence sensing platform for ultrasensitive detection of S1 nuclease activity has been constructed based on MnO₂ nanosheets and FAM labeled single-stranded DNA (FAM-ssDNA). In this system, MnO₂ nanosheets were found to have different adsorbent ability toward ssDNA and mono- or oligonucleotide fragments. FAM-ssDNA could adsorb on MnO₂ nanosheets and resulted in significant fluorescence quenching through fluorescence resonance energy transfer (FRET), while mono- or oligonucleotide fragments could not adsorb on MnO₂ nanosheets and still retained strong fluorescence emission. With the addition of S1 nuclease, FAM-ssDNA was cleaved into mono- or oligonucleotide fragments, which were not able to adsorb on MnO₂ nanosheets and the fluorescence signal was never quenched. The different fluorescence intensity allowed for examination of S1 nuclease activity. The developed method can detect S1 nuclease activity in the range of 0 - 20 U mL^-1 with a detection limit of 0.05 U mL^-1. Benefits of the system include less time-consuming processes and more simple design compared to other endonuclease assays. Satisfactory performance for S1 nuclease in complex samples has been successfully demonstrated with the system. The developed assay could potentially provide a new platform in bioimaging and clinical diagnosis.

Synthesis and electrochemical sodium-storage of few-layered MoS2/nitrogen, phosphorus-codoped graphene

Few-layered molybdenum disulfide/nitrogen, phosphorus co-doped graphene composites are synthesized by a quaternary phosphonium salt-assisted hydrothermal and annealing procedure. The prepared composites are analyzed by x-ray powder diffraction, x-ray photoelectron spectra, scanning electronic microscopy, transmission electronic microscopy, Raman spectra and nitrogen adsorption and desorption. Experimental results indicate that the MoS₂ nanosheets are of few-layered and defective structures and are well anchored on flexible conductive nitrogen, phosphorus co-doped graphene to constitute mesoporous composites with increased surface areas. Benefiting from the structural merits as well as surface-dominated pseudocapacitive contribution, the composite electrode presents a high electrochemical sodium storage capacity that arrives at 542 mAh g^-1 at a current density of 100 mA g^-1 with an excellent cyclability. Moreover, a superior high-rate capability can also be achieved.