Carbon-atom wires: 1-D systems with tunable properties

Most favorable cumulenic structures in iron-capped linear carbon chains are short singlet odd-carbon dications: a theoretical view

DFT computations suggest that the odd iron-capped linear-carbon dications exhibit large ΔE_S–T values and more cumulenic structures than short even-carbon chains.

Formation of carbyne-like materials during low temperature pyrolysis of lignocellulosic biomass: A natural resource of linear sp carbons

The exploration, understanding and potential applications of ‘Carbyne’, the one-dimensional sp allotrope of carbon, have been severely limited due to its extreme reactivity and a tendency for highly exothermic cross-linking. Due to ill-defined materials, limited characterization and a lack of compelling definitive evidence, even the existence of linear carbons has been questioned. We report a first-ever investigation on the formation of carbyne-like materials during low temperature pyrolysis of biobased lignin, a natural bioresource. The presence of carbyne was confirmed by detecting acetylenic –C≡C– bonds in lignin chars using NMR, Raman and FTIR spectroscopies. The crystallographic structure of this phase was determined as hexagonal: a = 6.052 Å, c = 6.96 Å from x-ray diffraction results. HRSEM images on lignin chars showed that the carbyne phase was present as nanoscale flakes/fibers (~10 nm thick) dispersed in an organic matrix and showed no sign of overlapping or physical contact. These nanostructures did not show any tendency towards cross-linking, but preferred to branch out instead. Overcoming key issues/challenges associated with their formation and stability, this study presents a novel approach for producing a stable condensed phase of sp-bonded linear carbons from a low-cost, naturally abundant, and renewable bioresource.

Reductive Aromatization/Dearomatization and Elimination Reactions to Access Conjugated Polycyclic Hydrocarbons, Heteroacenes, and Cumulenes

Acenes, heteroacenes, conjugated polycyclic hydrocarbons, and polycyclic aromatic hydrocarbons (collectively referred to in this review as conjugated polycyclic molecules, CPMs) have fascinated chemists since they were first isolated and synthesized in the mid 19th century. Most recently, these compounds have shown significant promise as the active components in organic devices (e.g., solar cells, thin-film transistors, light-emitting diodes, etc.), and, since 2001, a plethora of publications detail synthetic strategies to produce CPMs. In this review, we discuss reductive aromatization, reductive dearomatization, and elimination/extrusion reactions used to form CPMs. After a brief discussion on early methods to synthesize CPMs, we detail the use of reagents used for the reductive (de)aromatization of precursors containing 1,4-diols/diethers, including SnCl₂ and iodide (I^- ). Extension of these methods to carbomers and cumulenes is briefly discussed. We then describe low-valent metal species used to reduce endoxides to CPMs, and discuss the methods to directly reduce acenediones and acenones to the respective acene. In the final section, we describe methods used to affect aromatization to the desired CPM via extrusion of small, volatile molecules.

Effect of Li Termination on the Electronic and Hydrogen Storage Properties of Linear Carbon Chains: A TAO-DFT Study

Accurate prediction of the electronic and hydrogen storage properties of linear carbon chains (C n ) and Li-terminated linear carbon chains (Li2C n ), with n carbon atoms (n = 5-10), has been very challenging for traditional electronic structure methods, due to the presence of strong static correlation effects. To meet the challenge, we study these properties using our newly developed thermally-assisted-occupation density functional theory (TAO-DFT), a very efficient electronic structure method for the study of large systems with strong static correlation effects. Owing to the alteration of the reactivity of C n and Li2C n with n, odd-even oscillations in their electronic properties are found. In contrast to C n , the binding energies of H2 molecules on Li2C n are in (or close to) the ideal binding energy range (about 20 to 40 kJ/mol per H2). In addition, the H2 gravimetric storage capacities of Li2C n are in the range of 10.7 to 17.9 wt%, satisfying the United States Department of Energy (USDOE) ultimate target of 7.5 wt%. On the basis of our results, Li2C n can be high-capacity hydrogen storage materials that can uptake and release hydrogen at temperatures well above the easily achieved temperature of liquid nitrogen.

Odd [n]Cumulenes (n = 3, 5, 7, 9): Synthesis, Characterization, and Reactivity

In comparison to the omnipresent two- and three-dimensional allotropes of carbon, namely, graphite and diamond (as well as recent entries graphene, carbon nanotubes, and fullerenes), a detailed understanding of the one-dimensional carbon allotrope carbyne is not well established, and even the existence of carbyne has been a matter of controversy over the past decades. Composed of sp-hybridized carbon, carbyne could potentially exist in two forms, either as a polyyne (alternating single and triple bonds, expected to show a semiconducting behavior) or as a cumulene (all carbon atoms are connected via double bonds, predicted to show metallic behavior). Although a number of publications are available on the hypothetical structure and properties of carbyne, specific knowledge about its physical and spectroscopic characteristics is still unclear. In order to predict the properties of carbyne, the synthesis and study of model compounds, namely, polyynes and cumulenes, has been a promising avenue. The synthesis of polyynes has been extensively explored in the last decades, culminating with the isolation of a polyyne with 22 acetylene units, which allows extrapolation to the properties of carbyne. Extended cumulenes, on the other hand, have remained much less well-known, and specific studies of properties versus molecular length are quite limited. A limiting factor to the study of [n]cumulenes has been their dramatically increased reactivity, especially in comparison to polyynes of comparable length. For example, most known [7]cumulenes can only be handled in solution, while the polyynes of equivalent length (i.e., a triyne with three acetylene units) are quite stable. [9]Cumulenes are the longest derivatives studied to date. In this Account, we describe our efforts to design and synthesize odd [n]cumulenes (i.e., n = 3, 5, 7, 9) that are sufficiently persistent under ambient conditions to allow in depth characterization of physical and spectral properties. This goal has been achieved through modification of the end-capping groups by increasing the steric bulk and thereby shielding the reactive cumulene framework to provide stable [7]- and [9]cumulenes. An alternative route to stabilization is accomplished via encapsulation of the cumulene skeleton in a macrocycle, that is, formation of cumulene rotaxanes. The new sterically encumbered cumulenic products are reasonably stable under normal laboratory conditions, although some readily undergo cycloaddition reactions to give interesting products. We have explored preliminary trends for the reactivity of long [n]cumulenes. Finally, trends in the series of [n]cumulene model compounds are now discernible, including a thorough consideration of bond length alternation (BLA) in long [n]cumulenes using X-ray crystallographic analyses, as well as electronic properties via UV-vis spectroscopy and cyclic voltammetry.

Scaling Limits of Graphene Nanoelectrodes

Graphene nanogap electrodes have been of recent interest in a variety of fields, ranging from molecular electronics to phase change memories. Several recent reports have highlighted that scaling graphene nanogaps to even smaller sizes is a promising route to more efficient and robust molecular and memory devices. Despite the significant interest, the operating and scaling limits of these electrodes are completely unknown. In this paper, we report on our observations of consistent voltage driven resistance switching in sub-5 nm graphene nanogaps. We find that such electrical switching from an insulating state to a conductive state occurs at very low currents and voltages (0.06 μA and 140 mV), independent of the conditions (room ambient, low temperatures, as well as in vacuum), thus portending potential limits to scaling of functional devices with carbon electrodes. We then associate this phenomenon to the formation and rupture of carbon chains. Using a phase change material in the nanogap as a demonstrator device, fabricated using a self-alignment technique, we show that for gap sizes approaching 1 nm the switching is dominated by such carbon chain formation, creating a fundamental scaling limit for potential devices. These findings have important implications, not only for fundamental science, but also in terms of potential applications.

Heavier Carbon Subchalcogenides as C3 Sources for Tungsten-Capped Cumulenes: A Theoretical Study

Heavier carbon subchalcogenides C₃E₂ (E = S, Se) can bind to transition metals through either a C═C or a C═E double bond. These two binding modes on a reactive tungsten (PMe₃)₄WCl₂ site have been explored by density functional theory methods (M06-L/DZP+Lanl2DZ). The important step controlling the reaction direction is the initial binding of the C₃E₂ ligand. Of particular significance is the M═C═C═C═E fragment resulting from the C═E coordination mode. This fragment can bind to additional C₃E₂ molecules or bridge to other metals. Ultimately C₃E₂ serves as a source of C₃ units for building C_3n carbon sp-hybridized allotropes.

Polymerization of acetylene: polyynes, but not carbyne

Polymerization of acetylene in the presence of sterically-hindered endgroups leads to polyynes, but with lengths shorter than by stepwise syntheses.

Electronic structure and charge transport properties of atomic carbon wires

Atomic carbon wires represent the ultimate one-atom-thick one-dimensional structure.

Cu-metalated carbyne acting as a promising molecular wire

The atomic structure and electronic transport properties of Cu-metalated carbyne are investigated by using the non-equilibrium Green's function formalism combined with density functional theory. Our calculations show that the incorporation of Cu atom in carbyne improves its robustness against Peierls distortion, thus to make Cu-metalated carbyne behave as a one-dimensional metal. When a finite Cu-metalated carbyne chain is connected to two (111)-oriented platinum electrodes, nearly linear current-voltage characteristics are obtained for both the atop and adatom binding sites. This is due to the efficient electronic coupling between the Cu-metalated carbyne chain and the Pt electrodes, demonstrating the promising applications of Cu-metalated carbyne chains as molecular wires in future electronic devices.

Highly active nickel-cobalt/nanocarbon thin films as efficient water splitting electrodes

Developing low cost, highly active and stable electrocatalysts for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) using the same electrolyte has remained a major challenge. Herein, we report a novel and robust material comprised of nickel-cobalt nanoparticles coated on a porous nitrogen-doped carbon (NC) thin film synthesized via a two-step pulsed laser deposition technique. The optimized sample (Ni_0.5Co_0.5/NC) achieved the lowest overpotentials of 176 mV and 300 mV at a current density of 10 mA cm^-2 for HER and OER, respectively. The optimized OER activity might be attributed to the available metal oxide nanoparticles with an effective electronic structure configuration and enhanced mass/charge transport capability. At the same time, the porous nitrogen doped carbon incorporated with cobalt and nickel species can serve as an excellent HER catalyst. As a result, the newly developed electrocatalysts manifest high current densities and strong electrochemical stability in overall water splitting, outperforming most of the previously reported non-precious metal-based catalysts.

Pseudocarbynes: Charge-Stabilized Carbon Chains

Carbyne is the long-sought linear allotrope of carbon. Despite many reports of solid carbyne, the evidence is unconvincing. A recent report of supposed carbyne shows gold clusters in transmission electron microscopy (TEM) images. In order to determine the effects of such clusters, we performed ab initio calculations of uncapped and capped linear carbon chains and their complexes with gold clusters. The results indicate that gold dramatically alters the electron densities of the C≡C bonds. The resulting charge-stabilization of the carbon chains leads to pseudocarbynes. These findings are corroborated in calculations of the structures of crystals containing isolated carbon chains and those intercalated with gold clusters. Calculated Raman spectra of these pseudocarbynes with gold clusters are in better agreement with experiment than calculated spectra of isolated carbon chains. The current work opens the way toward the design and development of a new class of metal-intercalated carbon compounds.

Porous CY carbon: a new semiconducting phase with an sp1–sp2–sp3 bonding network

A new porous semiconducting carbon allotrope.