Understanding the Role of Oxidative Debris on the Structure of Graphene Oxide Films at the Air-Water Interface: A Neutron Reflectivity Study

We address here the role of oxidation impurities on the structure of graphene oxide films at the air-water interface by specular neutron reflectivity (SNR). We study films of purified graphene oxide (PGO) and nonpurified graphene oxide in the close-packed state. Nonpurified graphene oxide is constituted by graphene oxide (GO) layers with oxidation impurities adsorbed on the basal plane, while in PGO sheets, impurities are eliminated. SNR measurements show that GO films are formed by well-defined bilayers constituted by 2-3 layers of GO stacked in contact with air and a second layer of impurities submerged in the aqueous subphase. In contrast, PGO films are formed by a single layer in contact with air. We show for the first time that impurities constitute a layer submerged in the aqueous subphase, decrease the elasticity, and favor the collapse of graphene oxide films. Our results allow designing the surface properties of GO trapped at fluid interfaces.

Graphene-Based Strategies in Liquid Biopsy and in Viral Diseases Diagnosis

Graphene-based materials are intriguing nanomaterials with applications ranging from nanotechnology-related devices to drug delivery systems and biosensing. Multifunctional graphene platforms were proposed for the detection of several typical biomarkers (i.e., circulating tumor cells, exosomes, circulating nucleic acids, etc.) in liquid biopsy, and numerous methods, including optical, electrochemical, surface-enhanced Raman scattering (SERS), etc., have been developed for their detection. Due to the massive advancements in biology, material chemistry, and analytical technology, it is necessary to review the progress in this field from both medical and chemical sides. Liquid biopsy is considered a revolutionary technique that is opening unexpected perspectives in the early diagnosis and, in therapy monitoring, severe diseases, including cancer, metabolic syndrome, autoimmune, and neurodegenerative disorders. Although nanotechnology based on graphene has been poorly applied for the rapid diagnosis of viral diseases, the extraordinary properties of graphene (i.e., high electronic conductivity, large specific area, and surface functionalization) can be also exploited for the diagnosis of emerging viral diseases, such as the coronavirus disease 2019 (COVID-19). This review aimed to provide a comprehensive and in-depth summarization of the contribution of graphene-based nanomaterials in liquid biopsy, discussing the remaining challenges and the future trend; moreover, the paper gave the first look at the potentiality of graphene in COVID-19 diagnosis.

Sample Preparation Using Graphene-Oxide-Derived Nanomaterials for the Extraction of Metals

Graphene oxide is a compound with a form similar to graphene, composed of carbon atoms in a sp2 single-atom layer of a hybrid connection. Due to its significant surface area and its good mechanical and thermal stability, graphene oxide has a plethora of applications in various scientific fields including heterogenous catalysis, gas storage, environmental remediation, etc. In analytical chemistry, graphene oxide has been successfully employed for the extraction and preconcentration of organic compounds, metal ions, and proteins. Since graphene oxide sheets are negatively charged in aqueous solutions, the material and its derivatives are ideal sorbents to bind with metal ions. To date, various graphene oxide nanocomposites have been successfully synthesized and evaluated for the extraction and preconcentration of metal ions from biological, environmental, agricultural, and food samples. In this review article, we aim to discuss the application of graphene oxide and functionalized graphene oxide nanocomposites for the extraction of metal ions prior to their determination via an instrumental analytical technique. Applications of ionic liquids and deep eutectic solvents for the modification of graphene oxide and its functionalized derivatives are also discussed.

A graphene oxide-based fluorescence assay for the sensitive detection of DNA exonuclease enzymatic activity

The 3'-5' exonuclease enzyme plays a dominant role in multiple pivotal physiological activities, such as DNA replication and repair processes. In this study, we designed a sensitive graphene oxide (GO)-based probe for the detection of exonuclease enzymatic activity. In the absence of Exo III, the strong π-π interaction between the fluorophore-tagged DNA and GO causes the efficient fluorescence quenching via a fluorescence resonance energy transfer (FRET). In contrast, in the presence of Exo III, the fluorophore-tagged 3'-hydroxyl termini of the DNA probe was digested by Exo III to set the fluorophore free from adsorption when GO was introduced, causing an inefficient fluorescence quenching. As a result, the fluorescence intensity of the sensor was found to be proportional to the concentration of Exo III; towards the detection of Exo III, this simple GO-based probe demonstrated a highly sensitive and selective linear response in the low detection range from 0.01 U mL-1 to 0.5 U mL-1 and with the limit of detection (LOD) of 0.001 U mL-1. Compared with other fluorescent probes, this assay exhibited superior sensitivity and selectivity in both buffer and fetal bovine serum samples, in addition to being cost effective and having a simple setup.

Graphene family nanomaterials for application in cancer combination photothermal therapy

Combining hyperthermia with other therapies holds a great potential for improving cancer treatment. In this approach, the increase in the body temperature can exert a therapeutic effect on cells and/or enhance the effectiveness of anticancer agents. However, the conventional methodologies available to induce hyperthermia cannot confine a high temperature increase to the tumor-site while maintaining healthy tissues unexposed and ensuring minimal invasiveness. To overcome these limitations, combination photothermal therapy (PTT) mediated by graphene family nanomaterials (GFN) has been showing promising results. Such is owed to the ability of GFN to accumulate at the tumor site and convert near infrared light into heat, enabling a hyperthermia with a high spatial-temporal resolution. Furthermore, GFN can also incorporate different therapeutic agents on their structure for delivery purposes to cancer cells. In this way, the combination PTT mediated by GFN can result in an improved therapeutic effect. In this review, the combination of GFN mediated PTT with chemo-, photodynamic-, gene-, radio-, and immuno-therapies is examined. Furthermore, the main parameters that influence these types of combination approaches are also analyzed, with emphasis on the photothermal potential of GFN and on the vascular and cellular effects produced by the temperature increase mediated by GFN.

A Facile and Green Synthesis of a MoO2-Reduced Graphene Oxide Aerogel for Energy Storage Devices

A simple, low cost, and "green" method of hydrothermal synthesis, based on the addition of l-ascorbic acid (l-AA) as a reducing agent, is presented in order to obtain reduced graphene oxide (rGO) and hybrid rGO-MoO₂ aerogels for the fabrication of supercapacitors. The resulting high degree of chemical reduction of graphene oxide (GO), confirmed by X-Ray Photoelectron Spectroscopy (XPS) analysis, is shown to produce a better electrical double layer (EDL) capacitance, as shown by cyclic voltammetric (CV) measurements. Moreover, a good reduction yield of the carbonaceous 3D-scaffold seems to be achievable even when the precursor of molybdenum oxide is added to the pristine slurry in order to get the hybrid rGO-MoO₂ compound. The pseudocapacitance contribution from the resulting embedded MoO₂ microstructures, was then studied by means of CV and electrochemical impedance spectroscopy (EIS). The oxidation state of the molybdenum in the MoO₂ particles embedded in the rGO aerogel was deeply studied by means of XPS analysis and valuable information on the electrochemical behavior, according to the involved redox reactions, was obtained. Finally, the increased stability of the aerogels prepared with l-AA, after charge-discharge cycling, was demonstrated and confirmed by means of Field Emission Scanning Electron Microscopy (FESEM) characterization.

Graphene Oxide-Based Biosensors for Liquid Biopsies in Cancer Diagnosis

Liquid biopsies use blood or urine as test samples, which are able to be continuously collected in a non-invasive manner. The analysis of cancer-related biomarkers such as circulating tumor cells (CTCs), circulating tumor DNA (ctDNA), microRNA, and exosomes provides important information in early cancer diagnosis, tumor metastasis detection, and postoperative recurrence monitoring assist with clinical diagnosis. However, low concentrations of some tumor markers, such as CTCs, ctDNA, and microRNA, in the blood limit its applications in clinical detection and analysis. Nanomaterials based on graphene oxide have good physicochemical properties and are now widely used in biomedical detection technologies. These materials have properties including good hydrophilicity, mechanical flexibility, electrical conductivity, biocompatibility, and optical performance. Moreover, utilizing graphene oxide as a biosensor interface has effectively improved the sensitivity and specificity of biosensors for cancer detection. In this review, we discuss various cancer detection technologies regarding graphene oxide and discuss the prospects and challenges of this technology.

Recent Progress in Carbon-Based Buffer Layers for Polymer Solar Cells

Carbon-based materials are promising candidates as charge transport layers in various optoelectronic devices and have been applied to enhance the performance and stability of such devices. In this paper, we provide an overview of the most contemporary strategies that use carbon-based materials including graphene, graphene oxide, carbon nanotubes, carbon quantum dots, and graphitic carbon nitride as buffer layers in polymer solar cells (PSCs). The crucial parameters that regulate the performance of carbon-based buffer layers are highlighted and discussed in detail. Furthermore, the performances of recently developed carbon-based materials as hole and electron transport layers in PSCs compared with those of commercially available hole/electron transport layers are evaluated. Finally, we elaborate on the remaining challenges and future directions for the development of carbon-based buffer layers to achieve high-efficiency and high-stability PSCs.

Fabrication of pH-responsive TA-keratin bio-composited hydrogels encapsulated with photoluminescent GO quantum dots for improved bacterial inhibition and healing efficacy in wound care management: In vivo wound evaluations

Wounds origins serious complications of lives of human beings which may leads to death. The important issue for the problem is infection during wound care management which delays wound healing process. These kinds of infections may be caused by the overuse or misuse of antibiotics, antidotes, usage of new drugs, not properly sterilized surgical instruments, not appropriate for pH level and imperfect wound dressing etc. during or after surgery. Hence in this report, antimicrobial action of pH responsive TA/KA composited hydrogel crosslinked with GO-QDs (TA/KA-GOQDs) using citric acid as cross-linker has been reported by demonstrating in-vitro and in-vivo studies for wound care management. The prepared samples of GOQDs, TA/KA hydrogel and TA/KA-GOQDs were characterized using FT-IR, XRD, SEM and TEM techniques. pH responsive hydrogel property of TA/KA was evaluated by swelling studies. In-vitro antibacterial studies was carried out by direct contact test method. Further, the prepared samples were tested in a wound healing model of rate with the wound of size 1.5 cm² for in-vivo studies. After 16 days of treatment, the prepared samples for wound healing causes 100% wound areas closure. Histological observations were made by MT and HE staining process which proves keratinocytes proliferation by biocompatible and biocomposited TA/KA-GOQDs. The pH responsive TA/KA-GOQDs proved as efficient wound healing agent by faster keratinocytes proliferation within a compact period.

Epoxy resin composites with commercially available graphene: toward high toughness and rigidity

Some commercially available graphene (CG) samples, actually graphite nanoplates, are difficult to be applied in polymers due to their large thickness, even though their fabrication is more cost-effective. In this work, a CG sample with a thickness of about 25 nm is pre-treated via a facile acid soaking technique, and then the acid-treated CG is introduced into epoxy resin (EP) to improve the toughness while maintaining the high rigidity of the EP. The thickness of the acid-treated CG is dramatically decreased to about 1 nm, well-dispersing CG in the EP matrix. The tensile strength and the fracture energy of EP composite with 0.2 wt% acid-treated CG are increased to 85.2 MPa and 3.6 kJ m-2 from 74.3 MPa and 2.3 kJ m-2 of pure EP, respectively. In addition, the tensile-fractured surfaces of EP composites reveal that the toughening mechanism is mainly attributed to the crack deflection and crack pinning caused by the firmly-embedded CG nanosheets in the EP matrix. Besides, the glass transition temperature of EP composites is increased to 170.5 °C from 163.9 °C of pure EP. The present study provides a valuable approach for making use of the cost-effective graphite nanoplates to achieve a similar performance as graphene in EP.

Continuous flow photolytic reduction of graphene oxide

Reduced graphene oxide (rGO) is generated from GO dispersed in water under continuous flow in the absence of harsh reducing agents, in a vortex fluidic device, such that the processing is scalable with uniformity of the product. This involves simultaneously UV irradiating (λ = 254 nm, 20 W) the dynamic thin film in the rapidly rotating glass tube in the microfluidic platform. The rGO is comparable to that formed using waste generating chemical based processing, with a film of the material having a resistance of 2.2 × 105 Ω and a remarkably high conductivity of 2 × 104 S cm-1.

Graphene-Based Catalysts for Ozone Processes to Decontaminate Water

The use of graphene-based materials as catalysts in both ozone and ozone/radiation processes is creating interest among researchers devoted to the study of advanced oxidation processes (AOPs) for the degradation of organic pollutants in water. In this review, detailed explanations of catalytic and photocatalytic ozonation processes mediated by graphene-based materials are presented, focusing on aspects related to the preparation and characterization of catalysts, the nature of the water pollutants treated, the type of reactors and radiation sources applied, the influence of the main operating variables, catalyst activity and stability, and kinetics and mechanisms.

Emerging Trends in the Syntheses of Heterocycles Using Graphene-based Carbocatalysts: An Update

Graphene-based carbocatalysts owing to numerous amazing properties such as large specific surface area, high intrinsic mobility, excellent thermal and electrical conductivities, chemical stability, ease of functionalization, simple method of preparation, effortless recovery and recyclability have gained a superior position amongst the conventional homogeneous and heterogeneous catalysts. In this review, an endeavor has been made to highlight the syntheses of diverse heterocyclic compounds catalyzed by graphene-based catalysts. Further, the study also reveals that all the catalysts could be reused several times without significant loss in their catalytic activity. Additionally, most of the reactions catalyzed by graphene-based carbocatalysts were carried out at ambient temperature and under solvent-free conditions. Thus, the graphene-based catalysts do not merely act as efficient catalysts but also serve as sustainable, green catalysts. This review is divided into various sub-sections, each of which comprehensively describes the preparation of a particular heterocyclic scaffold catalyzed by graphene-derived carbocatalyst in addition to synthesis of graphene oxide and reduced graphene oxide, functionalization, and structural features governing their catalytic properties. Synthesis of heterocycles catalyzed by graphene-based carbocatalysts.

ZnO@ porous graphite nanocomposite from waste for superior photocatalytic activity

In this work, a new type of advanced 3D mesoporous carbon nanocomposites derived from Zn dust/PET bottle mixed waste with a high surface area is created. Interestingly, simultaneous transformation of Zn metal into ZnO nanoparticles and PET bottle waste to porous carbon materials occurred upon thermal treatment at 700 °C. The effect of the amount of Zn metal on the prepared materials has been studied. The carbon material-based waste presented very large surface area (up to 684.5 m²/g) with pore size distribution (18.47-16.88 nm). The SEM and TEM analysis revealed that the produced carbon materials have 3D porous dense layers with a gradient pore structure. The created waste-based nanocomposite exhibited an enhanced photocatalytic performance for the degradation of organic dyes (methylene blue and malachite green). It is believed that the presented work not only provides a sustainable approach to the creation of new nanocomposites of ZnO-mesoporous carbon materials for the application in photocatalysis but also introduces a new way of upcycling of mixed waste materials.

Endotoxin removal from aqueous solutions with dimethylamine-functionalized graphene oxide: Modeling study and optimization of adsorption parameters

Novel graphene oxide (GO)-based adsorbent embedded with epichlorohydrin (ECH) as a coupling agent and dimethylamine (DMA) as a ligand (GO-ECH-DMA) were prepared and employed for endotoxin removal from aqueous solutions. The physicochemical properties of nanocomposite were fully characterized. The model attributed to batch adsorption process was optimized employing response surface methodology (RSM) via various parameters such as pH, GO-ECH-DMA dosage, and contact time and endotoxin concentration. The p-value with low probability (<0.00001), determination coefficient (R²=0.99) and the non-significant lack of fit (p > 0.05) showed a quadratic model with a good fit with experimental terms. The synergistic effects of the linear term of contact time and GO-ECH-DMA dosage on endotoxin removal were significant. The optimum condition for endotoxin removal was obtained at pH of 5.52, GO-ECH-DMA dosage of 21 mgL^-1, contact time of 56 min and endotoxin concentration of 51.3 endotoxin units per milliliter (EUmL^-1). The equilibrium was the better explained by Langmuir isotherm with the maximum monolayer adsorption capacity of 121.47 EUmg-1, while the kinetics of the endotoxin adsorption process was followed by the pseudo-second-order model. The adsorbent could be recycled with NaOH. The possible mechanisms of endotoxin adsorption were proposed by hydrogen-bonding, π-π stacking, and electrostatic interaction.

Photoinduced antibacterial activity of NRC03 peptide-conjugated dopamine/nano-reduced graphene oxide against Staphylococcus aureus

NRC03-DA/nRGO possessed biocompatible properties and NIR photothermal energy conversion capability. The continuous photoinduced NRC03 peptide release consequently improved the therapeutic efficiency of photothermal therapy against S. aureus.

Green syntheses of silver nanoparticle decorated reduced graphene oxide using l-methionine as a reducing and stabilizing agent for enhanced catalytic hydrogenation of 4-nitrophenol and antibacterial activity

Herein, we have reported a facile and green synthesis approach of Ag NP decorated reduced graphene oxide (RGO) through an in situ self-assembly method in the presence of l-methionine (l-Met) as reducing and stabilizing agent. The electronic properties, crystal structure, and morphology of the as-synthesized RGO–Ag nanocomposite were investigated by UV-Visible (UV-Vis) spectroscopy, Fourier transform-infrared (FTIR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) techniques. UV-Vis and FTIR show the effective reduction of GO and the formation of Ag NPs using l-Met. FESEM, TEM, and XRD analysis show the successful impregnation of Ag NPs into RGO with a 23 nm average crystallite size. The RGO–Ag nanocomposite with NaBH₄ shows a fast-catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AMP). The enhanced catalytic activity of RGO–Ag nanocomposites can be attributed to the synergistic effect of improved adsorption capacity and the absence of agglomeration of Ag nanoparticles. Moreover, RGO–Ag showed strong antibacterial activity against B. subtilis and E. coli.

Herein, we have reported a facile and green synthesis approach of Ag NP decorated reduced graphene oxide (RGO) through an in situ self-assembly method in the presence of l-methionine (l-Met) as reducing and stabilizing agent.

Transparent Conductive Electrodes Based on Graphene-Related Materials

Transparent conducting electrodes (TCEs) are the most important key component in photovoltaic and display technology. In particular, graphene has been considered as a viable substitute for indium tin oxide (ITO) due to its optical transparency, excellent electrical conductivity, and chemical stability. The outstanding mechanical strength of graphene also provides an opportunity to apply it as a flexible electrode in wearable electronic devices. At the early stage of the development, TCE films that were produced only with graphene or graphene oxide (GO) were mainly reported. However, since then, the hybrid structure of graphene or GO mixed with other TCE materials has been investigated to further improve TCE performance by complementing the shortcomings of each material. This review provides a summary of the fabrication technology and the performance of various TCE films prepared with graphene-related materials, including graphene that is grown by chemical vapor deposition (CVD) and GO or reduced GO (rGO) dispersed solution and their composite with other TCE materials, such as carbon nanotubes, metal nanowires, and other conductive organic/inorganic material. Finally, several representative applications of the graphene-based TCE films are introduced, including solar cells, organic light-emitting diodes (OLEDs), and electrochromic devices.

Functionalized reduced graphene oxide as a lateral flow immuneassay label for one-step detection of Escherichia coli O157:H7

In this study, graphene oxide (GO) and reduced graphene oxide (rGO) were used as visual labels in a lateral flow assay for detection of E. coli O157:H7. The color intensity was employed for the quantitative measurements of the target bacteria. Quantitative results showed that in comparison to GO, rGO can provide higher color intensity owing to enhanced light absorption following chemical reduction. Our results confirm that the visual limit of detection of the target bacteria by rGO is ∼10⁵ colony forming unit per milliliter (CFU/ml), which closely compares with current alternative techniques using gold nanoparticles. The performance and practicability of the rGO-based test strips for detection of the target bacteria in milk and drinking water were validated with conventional plating and colony counting techniques. Results suggest that the proposed lateral flow assay is sensitive, specific, and affordable. It has also the potential to become a widely used detection technique for E. coli O157:H7 and a wide variety of other analytes.

A chemiluminescence aptasensor for thrombin detection based on aptamer-conjugated and hemin/G-quadruplex DNAzyme signal-amplified carbon fiber composite

In this work, a highly sensitive and selective chemiluminescence (CL) aptasensor was prepared for thrombin (THR) detection based on aptamer-conjugated and hemin/G-quadruplex DNAzyme signal-amplified carbon fiber composite (HG-DNAzyme/T-Apt/SiO₂@GO@CF). Initially, SiO₂@GO@CF was successfully prepared and characterized by Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). Thrombin aptamer (T-Apt) as an identification element and simulated enzyme - hemin/G-quadruplex DNAzyme (HG-DNAzyme) as a signal-amplified material, were applied in the CL aptasensor. Then, the immobilization properties of SiO₂@GO@CF and adsorption properties of T-Apt/SiO₂@GO@CF were studied. Lastly, HG-DNAzyme/T-Apt/SiO₂@GO@CF was applied in construction of the CL aptasensor. When THR existed, HG-DNAzyme was desorbed from the surface of T-Apt/SiO₂@GO@CF and catalyzed the CL system of luminol-H₂O₂. Under optimized CL conditions, THR was measured with the linear concentration range of 1.5 × 10^-14 to 2.5 × 10^-11 moL/L and the detection limit of 6.3 × 10^-15 moL/L (3δ). The proposed CL aptasensor was used to the determination of THR in human serum samples and recoveries ranged from 99.0% to 102.4%. Those satisfactory results illustrated the CL aptasensor could achieve highly sensitive and selective detection of THR and revealed potential application in practical samples.

Graphene Materials in Antimicrobial Nanomedicine: Current Status and Future Perspectives

Graphene materials (GMs), such as graphene, graphene oxide (GO), reduced GO (rGO), and graphene quantum dots (GQDs), are rapidly emerging as a new class of broad-spectrum antimicrobial agents. This report describes their state-of-the-art and potential future covering both fundamental aspects and biomedical applications. First, the current understanding of the antimicrobial mechanisms of GMs is illustrated, and the complex picture of underlying structure-property-activity relationships is sketched. Next, the different modes of utilization of antimicrobial GMs are explained, which include their use as colloidal dispersions, surface coatings, and photothermal/photodynamic therapy agents. Due to their practical relevance, the examples where GMs function as synergistic agents or release platforms for metal ions and/or antibiotic drugs are also discussed. Later, the applicability of GMs in the design of wound dressings, infection-protective coatings, and antibiotic-like formulations ("nanoantibiotics") is assessed. Notably, to support our assessments, the existing clinical applications of conventional carbon materials are also evaluated. Finally, the key hurdles of the field are highlighted, and several possible directions for future investigations are proposed. We hope that the roadmap provided here will encourage researchers to tackle remaining challenges toward clinical translation of promising research findings and help realize the potential of GMs in antimicrobial nanomedicine.

Plasma Jet Printing and in Situ Reduction of Highly Acidic Graphene Oxide

Miniaturization of electronic devices and the advancement of Internet of Things pose exciting challenges to develop technologies for patterned deposition of functional nanomaterials. Printed and flexible electronic devices and energy storage devices can be embedded onto clothing or other flexible surfaces. Graphene oxide (GO) has gained much attention in printed electronics due its solution processability, robustness, and high electrical conductivity in the reduced state. Here, we introduce an approach to print GO films from highly acidic suspensions with in situ reduction using an atmospheric pressure plasma jet. Low-temperature plasma of a He and H₂ mixture was used successfully to reduce a highly acidic GO suspension (pH < 2) in situ during deposition. This technique overcomes the multiple intermediate steps required to increase the conductivity of deposited GO. X-ray spectroscopic studies confirmed that the reaction intermediates and the concentration of oxygen functionalities bonded to GO have been reduced significantly by this approach without any additional steps. Moreover, the reduced GO films showed enhanced conductivity. Hence, this technique has a strong potential for printing conducting patterns of GO for a range of large-scale applications.

Millstone Exfoliation: a True Shear Exfoliation for Large-Size Few-Layer Graphene Oxide

A millstone (MS) was introduced in the production of large-size few-layer-graphene oxide (FLGO) via true shear exfoliation in order to minimize fragmentation. The MS was constructed with two glass plates, where the top plate was designed to rotate against the stationary bottom plate, thereby generating true shear force. Mildly oxidized graphite (MOG) was used for MS exfoliation in order to obtain both good property and high yield. The rpm of rotation (10, 20, 30, 40, and 50), solution concentration (0.5, 1, and 2 mg/ml), and number of exfoliation (1, 2, and 3) were optimized by measuring the UV-vis absorption, and the effect of oxidation time (30, 60, and 90 min) was studied under the given optimum conditions. Next, the FLGO was isolated by centrifugation and characterized by TEM and AFM. The FLGO obtained was as large as ~ 10 μm in size, which was slightly smaller than the pristine graphite, suggesting a possibility of slight fragmentation. But it was still much larger than the FLGO obtained via sonication (< 1 μm), demonstrating successful MS exfoliation.

Hierarchically Porous N-Doped Carbon Nanotubes/Reduced Graphene Oxide Composite for Promoting Flavin-Based Interfacial Electron Transfer in Microbial Fuel Cells

Interfacial electron transfer between an electroactive biofilm and an electrode is a crucial step for microbial fuel cells (MFCs) and other bio-electrochemical systems. Here, a hierarchically porous nitrogen-doped carbon nanotubes (CNTs)/reduced graphene oxide (rGO) composite with polyaniline as the nitrogen source has been developed for the MFC anode. This composite possesses a nitrogen atom-doped surface for improved flavin redox reaction and a three-dimensional hierarchically porous structure for rich bacterial biofilm growth. The maximum power density achieved with the N-CNTs/rGO anode in S. putrefaciens CN32 MFCs is 1137 mW m^-2, which is 8.9 times compared with that of the carbon cloth anode and also higher than those of N-CNTs (731.17 mW m^-2), N-rGO (442.26 mW m^-2), and the CNTs/rGO (779.9 mW m^-2) composite without nitrogen doping. The greatly improved bio-electrocatalysis could be attributed to the enhanced adsorption of flavins on the N-doped surface and the high density of biofilm adhesion for fast interfacial electron transfer. This work reveals a synergistic effect from pore structure tailoring and surface chemistry designing to boost both the bio- and electrocatalysis in MFCs, which also provide insights for the bioelectrode design in other bio-electrochemical systems.

High Efficient Reduction of Graphene Oxide via Nascent Hydrogen at Room Temperature

To develop a green and efficient method to synthesize graphene in relative milder conditions is prerequisite for graphene applications. A chemical reducing method has been developed to high efficiently reduce graphene oxide (GO) using Fe₂O₃ and NH₃BH₃ as catalyst and reductants, respectively. During the process, environmental and strong reductive nascent hydrogen were generated surrounding the surface of GO sheets by catalyst hydrolysis reaction of NH₃BH₃ and were used for reduction of GO. The reduction process was studied by ultraviolet absorption spectroscopy, Raman spectroscopy, and Fourier transform infrared spectrum. The structure and morphology of the reduced GO were characterized with scanning electron microscopy and transmission electron microscopy. Compared to metal (Mg/Fe/Zn/Al) particles and acid system which also use nascent hydrogen to reduce GO, this method exhibited higher reduction efficiency (43.6%). Also the reduction was carried out at room temperature condition, which is environmentally friendly. As a supercapacitor electrode, the reversible capacity of reduced graphene oxide was 113.8 F g⁻¹ at 1 A g⁻¹ and the capacitance retention still remained at 90% after 200 cycles. This approach provides a new method to reduce GO with high reduction efficiency by green reductant.

Synthesis of Graphite Oxide with Different Surface Oxygen Contents Assisted Microwave Radiation

Graphite oxide is synthesized via oxidation reaction using oxidant compounds that have lattice defects by the incorporation of unlike functional groups. Herein, we report the synthesis of the graphite oxide with diverse surface oxygen content through three (B, C, D) different modified versions of the Hummers method assisted microwave radiation compared with the conventional graphite oxide sample obtained by Hummers method (A). These methods allow not only the production of graphite oxide but also reduced graphene oxide, without undergoing chemical, thermal, or mechanical reduction steps. The values obtained of C/O ratio were ~2, 3.4, and ~8.5 for methodologies C, B, and D, respectively, indicating the presence of graphite oxide and reduced graphene oxide, according to X-ray photoelectron spectroscopy. Raman spectroscopy of method D shows the fewest structural defects compared to the other methodologies. The results obtained suggest that the permanganate ion produces reducing species during graphite oxidation. The generation of these species is attributed to a reversible reaction between the permanganate ion with π electrons, ions, and radicals produced after treatment with microwave radiation.

Blister formation during graphite surface oxidation by Hummers' method

Graphite oxide has a complex structure that can be modified in many ways to obtain materials for a wide range of applications. It is known that the graphite precursor has an important role in the synthesis of graphite oxide. In the present study, the basal-plane surface of highly annealed pyrolythic graphite (HAPG) was oxidized by Hummers' method and investigated by Raman spectroscopy and atomic force microscopy. HAPG was used as a graphite precursor because its surface after cleavage contains well-ordered millimeter-sized regions. The treatment resulted in graphite intercalation by sulfuric acid and blister formation all over the surface. Surprisingly, the destruction of the sp²-lattice was not detected in the ordered regions. We suggest that the reagent diffusion under the basal plane surface occurred through the cleavage steps and dislocations with the Burgers vector parallel to the c-axis in graphite.

Chemistry of Graphene Derivatives: Synthesis, Applications, and Perspectives

The chemistry of graphene and its derivatives is one of the hottest topics of current material science research. The derivatisation of graphene is based on various approaches, and to date functionalization with halogens, hydrogen, various functional groups containing oxygen, sulfur, nitrogen, phosphorus, boron, and several other elements have been reported. Most of these functionalizations are based on sp³ hybridization of carbon atoms in the graphene skeleton, which means the formation of out-of-plane covalent bonds. Several elements were also reported for substitutional modification of graphene, where the carbon atoms are substituted with atoms like nitrogen, boron, and several others. From tens of functional groups, for only two of them were reported full functionalization of graphene skeleton and formation of its stoichiometric counterparts, fluorographene and hydrogenated graphene. The functionalization of graphene is crucial for most of its applications including energy storage and conversion devices, electronic and optic applications, composites, and many others.

Interaction between functionalized graphene and sulfur compounds in a lithium–sulfur battery – a density functional theory investigation

Functionalized graphene can successfully anchor sulfur compoundsviamoderate interactions, leading to improved conductivity and charge transfer in the cathode of Li–S batteries.

Dichlorobenzene: an effective solvent for epoxy/graphene nanocomposites preparation

It is generally recognized that dimethylformamide (DMF) and ethanol are good media to uniformly disperse graphene, and therefore have been used widely in the preparation of epoxy/graphene nanocomposites. However, as a solvent to disperse graphene, dichlorobenzene (DCB) has not been fully realized by the polymer community. Owing to high values of the dispersion component (δ_d) of the Hildebrand solubility parameter, DCB is considered as a suitable solvent for homogeneous graphene dispersion. Therefore, epoxy/graphene nanocomposites have been prepared for the first time with DCB as a dispersant; DMF and ethanol have been chosen as the reference. The colloidal stability, mechanical properties, thermogravimetric analysis, dynamic mechanical analysis and scanning electron microscopic images of nanocomposites have been obtained. The results show that with the use of DCB, the tensile strength of graphene has been improved from 64.46 to 69.32 MPa, and its flexural strength has been increased from 97.17 to 104.77 MPa. DCB is found to be more effective than DMF and ethanol for making stable and homogeneous graphene dispersion and composites.