Chemically robust and readily available quinoline-based PNN iron complexes: application in C-H borylation of arenes

Iron catalysts have been used for over a century to produce ammonia industrially. However, the use of iron catalysts generally remained quite limited until relatively recently, when the abundance and low toxicity of iron spurred the development of a variety of iron catalysts. Despite the fact that iron catalysts are being developed as alternatives to precious metal catalysts, their reactivities and stabilities are quite different because of their unique electronic structures. In this context, our group previously developed a new family of quinoline-based PNN pincer-type ligands for low- to mid-valent iron catalysts. These chemically robust PNN ligands provide air- and moisture-tolerant iron complexes, which exhibit excellent catalytic performances in the C-H borylation of arenes. This feature article summarises our recent work on PNN iron complexes, including their conception and design, as well as related reports on iron pincer complexes and iron-catalysed C-H borylation reactions.

Unraveling the Effect of Aromatic Groups in Mn(I)NNN Pincer Complexes on Carbon Dioxide Activation Using Density Functional Study

Carbon dioxide utilization is necessary to reduce carbon footprint and also to synthesize value-added chemicals. The transition metal pincer complexes are attractive catalysts for the hydrogenation of carbon dioxide to formic acid. There is a need to understand the factors affecting the catalytic performance of these pincer complexes through a structure-activity relationship study using computational methods. It is a well-established fact that aromatic functionalities offer stability and selectivity to transition metal catalysts. However, their impact on the performance of the catalysts is lesser known in the case of metal pincer complexes. Hence, it is necessary to investigate the catalytic performance of Mn(I)NNN pincer complexes with variably activated aromatic functionalities. In this context, 15 catalysts are designed by placing different types of aromatic rings at the pincer carbons and two terminal nitrogen of Mn(I)NNN pincer complexes. A benzene moiety, placed at C2-C3 carbons of Mn(I)NNN pincer complex with identical aromatic groups at the terminal nitrogen, is found to be most efficient toward CO₂ hydrogenation than the rest of the catalysts. On the other hand, when N,N-dimethyl aniline is placed at C2-C3 carbons of Mn(I)NNN pincer complexes, then the catalytic performance is significantly decreased. Thus, the present study unravels the impact of aromatic groups in Mn(I)NNN pincer complexes toward the catalytic hydrogenation of carbon dioxide.

(Z)-Selective Hydroboration of Terminal Alkynes Catalyzed by a PSP-Pincer Rhodium Complex

A highly (Z)-selective hydroboration of terminal alkynes was achieved using a thioxanthene-based PSP-pincer rhodium catalyst. This hydroboration exhibited good chemoselectivity toward alkynes over carbonyl compounds such as ketones and aldehydes. The mechanistic studies indicated the involvement of rhodium-vinylidene intermediates, and the high (Z)-selectivity could be attributed to the rigid and electron-rich nature of the PSP-rhodium catalyst.

Coupling of CO2 and epoxides catalysed by novel N-fused mesoionic carbene complexes of nickel(II)

We report the syntheses of two rigid mesoionic carbene (MIC) ligands with a carbazole backbone via an intramolecular Finkelstein-cyclisation cascade and investigate their coordination behavior towards nickel(II) acetate. Despite the nickel(II) carbene complexes 4a,b showing only minor differences in their chemical composition, they display curious differences in their chemical properties, e.g. solubility. Furthermore, the potential of these novel MIC complexes in the coupling of carbon dioxide and epoxides as well as the differences in reactivity compared to classical NHC-derived complexes are evaluated.

Stannylenes based on pyrrole-phosphane and dipyrromethane-diphosphane scaffolds: syntheses and behavior as precursors to PSnP pincer palladium(II), palladium(0) and gold(I) complexes

2-Ditertbutylphosphanylmethylpyrrole (H₂pyrmP^tBu₂) and 2,2'-bis(diisopropylphosphanylmethyl)-5,5'-dimethyldipyrromethane ((HpyrmPⁱPr₂)₂CMe₂) have been used to synthesize new P-donor-stabilized stannylenes in which the Sn atom is attached to one, SnCl(HpyrmP^tBu₂) (1) and Sn{N(SiMe₃)₂}(HpyrmP^tBu₂) (2), or two pyrrolyl-phosphane scaffolds, Sn(HpyrmP^tBu₂)₂ (3), or to a dipyrromethane-diphosphane scaffold, Sn(pyrmPⁱPr₂)₂CMe₂ (4). It has been found that stannylenes 3 and 4 are excellent precursors to transition metal complexes containing PSnP pincer-type ligands. Their reactions with chlorido transition metal complexes have afforded [PdCl{κ³P,Sn,P-SnCl(HpyrmP^tBu₂)₂}] (6), [PdCl{κ³P,Sn,P-SnCl(pyrmPⁱPr₂)₂CMe₂}] (7) and [Au{κ³P,Sn,P-SnCl(HpyrmP^tBu₂)₂}] (8), which contain a PSnP pincer-type chloridostannyl ligand. While complexes 6 and 7 are square-planar palladium(II) complexes, compound 8 is an uncommon gold(I) complex having a T-shaped coordination geometry with a very long Sn-Au bond (3.120 Å). The T-shaped palladium(0) complex [Pd{κ³P,Sn,P-Sn(pyrmPⁱPr₂)₂CMe₂}] (9), which contains an unprecedented PSnP pincer-type stannylene that behaves as a Z-type (σ-acceptor) ligand, has been prepared from 4 and [Pd(η³-C₃H₅)(η⁵-C₅H₅)].

Diphosphino-Functionalized 1,8-Naphthyridines: a Multifaceted Ligand Platform for Boranes and Diboranes

A 1,8‐naphthyridine diphosphine (NDP) reacts with boron‐containing Lewis acids to generate complexes featuring a number of different naphthyridine bonding modes. When exposed to diborane B₂Br₄, NDP underwent self‐deprotonation to afford [NDP‐B₂Br₃]Br, an unsymmetrical diborane comprised of four fused rings. The reaction of two equivalents of monoborane BBr₃ and NDP in a non‐polar solvent provided the simple phosphine‐borane adduct [NDP(BBr₃)₂], which then underwent intramolecular halide abstraction to furnish the salt [NDP‐BBr₂][BBr₄], featuring a different coordination mode from that of [NDP‐B₂Br₃]Br. Direct deprotonation of NDP by KHMDS or PhCH₂K generates mono‐ and dipotassium reagents, respectively. The monopotassium reagent reacts with one or half an equivalent of B₂(NMe₂)₂Cl₂ to afford NDP‐based diboranes with three or four amino substituents.

Synthesis and Characterization of Cobalt NCN Pincer Complexes

A series of cobalt complexes, stabilized by a monoanionic tridentate NCN pincer ligand, was synthetized and characterized. Preparation of the paramagnetic 15 VE complex [Co(NCNCH2-Et)Br] (1) was accomplished by transmetalation of Li[2,6-(Et2NCH2)2C6H3] with CoBr2 in THF. Treatment of this air-sensitive compound with NO gas resulted in the formation of the diamagnetic Co(III) species [Co(NCNCH2-Et)(NO)Br] (2) as confirmed by X-ray diffraction. This complex features a strongly bent NO ligand (Co-N-O∠135.0°). The νNO is observed at 1609 cm-1 which is typical for a bent metal-N-O arrangement. Coordinatively unsaturated 1 could further be treated with pyridine, isocyanides, phosphines and CO to form five-coordinate 17 VE complexes. Oxidation of 1 with CuBr2 led to the formation of the Co(III) complex [Co(NCNCH2-Et)Br2]. Treatment of [Co(NCNCH2-Et)Br2] with TlBF4 as halide scavenger in acetonitrile led to the formation of the cationic octahedral complex [Co(NCNCH2-Et)(MeCN)3](BF4)2. A combination of X-ray crystallography, IR-, NMR- and EPR-spectroscopy as well as DFT/CAS-SCF calculations were used to characterize all compounds.

Computational Study of Bridge Splitting, Aryl Halide Oxidative Addition to PtII , and Reductive Elimination from PtIV : Route to Pincer-PtII Reagents with Chemical and Biological Applications

Density functional theory computation indicates that bridge splitting of [Pt^II R₂ (μ-SEt₂ )]₂ proceeds by partial dissociation to form R₂ Pt^a (μ-SEt₂ )Pt^b R₂ (SEt₂ ), followed by coordination of N-donor bromoarenes (L-Br) at Pt^a leading to release of Pt^b R₂ (SEt₂ ), which reacts with a second molecule of L-Br, providing two molecules of PtR₂ (SEt₂ )(L-Br-N). For R=4-tolyl (Tol), L-Br=2,6-(pzCH₂ )₂ C₆ H₃ Br (pz=pyrazol-1-yl) and 2,6-(Me₂ NCH₂ )₂ C₆ H₃ Br, subsequent oxidative addition assisted by intramolecular N-donor coordination via Pt^II Tol₂ (L-N,Br) and reductive elimination from Pt^IV intermediates gives mer-Pt^II (L-N,C,N)Br and Tol₂ . The strong σ-donor influence of Tol groups results in subtle differences in oxidative addition mechanisms when compared with related aryl halide oxidative addition to palladium(II) centres. For R=Me and L-Br=2,6-(pzCH₂ )₂ C₆ H₃ Br, a stable Pt^IV product, fac-Pt^IV Me₂ {2,6-(pzCH₂ )₂ C₆ H₃ -N,C,N)Br is predicted, as reported experimentally, acting as a model for undetected and unstable Pt^IV Tol₂ {L-N,C,N}Br undergoing facile Tol₂ reductive elimination. The mechanisms reported herein enable the synthesis of Pt^II pincer reagents with applications in materials and bio-organometallic chemistry.

Cooperative C-H activation of pyridine by PBP complexes of Rh and Ir can lead to bridging 2-pyridyls with different connectivity to the B-M unit

Pyridine and quinoline undergo selective C–H activation in the 2-position with Rh and Ir complexes of a boryl/bis(phosphine) PBP pincer ligand, resulting in a 2-pyridyl bridging the transition metal and the boron center. Examination of this reactivity with Rh and Ir complexes carrying different non-pincer ligands on the transition metal led to the realization of the possible isomerism derived from the 2-pyridyl fragment connecting either via B–N/C–M bonds or via B–C/N–M bonds. This M–C/M–N isomerism was systematically examined for four structural types. Each of these types has a defined set of ligands on Rh/Ir besides 2-pyridyl and PBP. A pair of M–C/M–N isomers for each type was computationally examined for Rh and for Ir, totaling 16 compounds. Several of these compounds were isolated or observed in solution by experimental methods, in addition to a few 2-quinolyl variants. The DFT predictions concerning the thermodynamic preference within each M–C/M–N isomeric match the experimental findings very well. In two cases where DFT predicts <2 kcal mol⁻¹ difference in free energy, both isomers were experimentally observed in solution. Analysis of the structural data, of the relevant Wiberg bond indices, and of the ETS-NOCV partitioning of the interaction of the 2-pyridyl fragment with the rest of the molecule points to the strength of the M–C(pyridyl) bond as the dominant parameter determining the relative M–C/M–N isomer favorability. This M–C bond is always stronger for the analogous Ir vs. Rh compounds, but the nature of the ligand trans to it has a significant influence, as well. DFT calculations were used to evaluate the mechanism of isomerization for one of the molecule types.

The thermodynamic preference between two isomeric products of C–H activation of pyridine, with 2-pyridyl bridging boron and iridium or rhodium, primarily depends on the M–C bond strength.

Ascendancy of Nitrogen Heterocycles in the Computationally Designed Mn(I)PNN Pincer Catalysts on the Hydrogenation of Carbon Dioxide to Methanol

The development of sustainable catalysts to get methanol from CO₂ under milder conditions and without any additives is still considered an arduous task. In many instances, transition-metal-catalyzed carbon dioxide to formic acid formation is more facile than methanol formation. This article provides comprehensive density functional theoretic investigations of six new Mn(I)PNN complexes, which are designed to perform CO₂ to methanol conversion under milder reaction conditions. All these six catalysts have similar structural features except at terminal nitrogen, -N (1), where adenine-inspired nitrogen heterocycles containing pyridine and pyrimidine moieties are attached to instill an electron withdrawing effect on the central metal and thus to facilitate dihydrogen polarization during the catalyst regeneration. All these computationally modeled Mn(I)PNN complexes demonstrate the promising catalytic activity to get methanol through cascade catalytic cycles at 298.15 K. The metal-ligand cooperative (MLC) as well as noncooperative (NC) pathways are investigated for each catalytic cycle. The NC pathway is the preferred pathway for formic acid and formaldehyde formation, whereas methanol formation proceeds through only the MLC pathway. Different nitrogen heterocycles attached to the -N (1) terminal manifested a considerable amount of impact on the Gibbs free energies, overall activation energies, and computed turnover frequencies (TOFs). Among all the catalysts, SPCAT02 provides excellent TOFs for HCO₂H (500 151 h^-1), HCHO (11 912 h^-1), and CH₃OH (2 372 400 h^-1) formation at 50 °C. SPCAT04 is found to be a better catalyst for the selective formation of formic acid formation at room temperature than the rest of the catalysts. The computed TOF results are found reliable upon comparison with experimentally established catalysts. To establish the structure-activity relationship, the activation strain model and Fukui function calculations are performed on all the catalysts. Both these studies provide complementary results. The present study revealed a very important finding that a more electrophilic metal center could facilitate the CO₂ hydrogenation reaction robustly. All computationally designed catalysts could be cheaper and better alternatives to convert CO₂ to methanol under mild reaction conditions in an aqueous medium.

Carbene-Catalyzed Enantioselective Hydrophosphination of α-Bromoenals to Prepare Phosphine-Containing Chiral Molecules

Disclosed herein is the first carbene-organocatalyzed asymmetric addition of phosphine nucleophiles to the in situ generated α,β-unsaturated acyl azolium intermediates. Our reaction enantioselectively constructs carbon-phosphine bonds and prepares chiral phosphines with high optical purities. The phosphine products are suitable for transforming to chiral ligands or catalysts with applications in asymmetric catalysis. The diarylalkyl or trialkyl phosphine products from our catalytic reactions, air-sensitive and reactive in nature, can be trapped (and stored) in their sulfur-oxidized form for operational simplicities.

Emerging Need of Today: Significant Utilization of Various Databases and Softwares in Drug Design and Development

In drug discovery, in silico methods have become a very important part of the process. These approaches impact the entire development process by discovering and identifying new target proteins as well as designing potential ligands with a significant reduction of time and cost. Furthermore, in silico approaches are also preferred because of reduction in the experimental use of animals as; in vivo testing for safer drug design and repositioning of known drugs. Novel software-based discovery and development such as direct/indirect drug design, molecular modelling, docking, screening, drug-receptor interaction, and molecular simulation studies are very important tools for the predictions of ligand-target interaction pattern, pharmacodynamics as well as pharmacokinetic properties of ligands. On the other part, the computational approaches can be numerous, requiring interdisciplinary studies and the application of advanced computer technology to design effective and commercially feasible drugs. This review mainly focuses on the various databases and software used in drug design and development to speed up the process.

Non-palindromic (C^C^D) gold(III) pincer complexes are not accessible by intramolecular oxidative addition of biphenylenes - an experimental and quantum chemical study

We herein report on the synthesis of biphenylenes substituted with a pyridine (N), a phosphine (P) and a carbene (C') donor as well as a carbene donor with additional pyridine in the lateral position. We describe the synthesis and structures of derived gold(i) complexes, which we tried to use for the synthesis of non-palindromic [(C^C^D)AuIII] pincer complexes by means of an intramolecular oxidative addition of the strained biphenylene ring. However, the anticipated formation of gold(iii) complexes failed due to kinetic and thermodynamic reasons, which we extensively investigated by quantum chemical calculations. Furthermore, we shed light on the oxidative addition of biphenylene to two different gold(i) systems reported in the literature. Our comprehensive quantum-chemical analysis is complemented by NMR experiments.

Nickel(II)-SNS Thiolate Complexes: Reactivity and Solution Dynamics

Nickel coordination chemistry with a biomimetic thiolate-imine-thioether SNS^Me ligand is accompanied by diverse reactivity and multidentate ligand dynamics. Reaction of Ni(acac)₂ with 2 equiv of 2-(methylthio)-phenyl-benzothiazolidine (MPB) affords the bis(arylimino-phenylene-thiolate) complex Ni(κ²-SNS^Me)₂ (1; acac = acetylacetonate). Thermolysis of 1 in refluxing toluene is accompanied by imine C-C bond formation, yielding [Ni(N₂S₂)] (2) with a redox-active ligand. Protonation of 1 with NHTf₂ at a low temperature released 1 equiv of MPB, yielding crystals of the dimeric dication {[Ni(μ-κ³-SNS^Me)]₂}(NTf₂)₂ (3; Tf = SO₂CF₃) in high yield. In contrast, the same reaction at room temperature gave also paramagnetic complexes {Ni[μ-Ni(κ³-SNS^Me)₂]₂}(NTf₂)₂ (4) and {Ni[μ-Ni(κ³-SNS^Me)₂]₃}(NTf₂)₂ (5) that feature coordination of two or three pseudo-octahedral, paramagnetic Ni(κ³-SNS^Me)₂ units to a central Ni(II) dication via thiolate bridges. Remarkably, dissolution of 3 in a variety of solvents, including weakly coordinating CH₂Cl₂, rapidly generates a mixture of 4 and Ni(NTf)₂. Treatment of this mixture with Lewis bases L gave high yields of dimers {[Ni(μ-κ³-SNS^Me)L]₂}(NTf₂)₂ for L = CNXylyl (6a) and {[Ni(μ-κ³-SNS^Me)]₂(μ-dmpm)}(NTf₂)₂ (6b; dmpm = bis(dimethylphosphino)methane) or monomers [Ni(κ³-SNS^Me)L](NTf₂) for L = PMe₃ (7a) and P(OMe)₃ (7b). Addition of 2 equiv of the strong donor N-heterocyclic carbene ligand, IPr, to 3, however, led to thioether demethylation, affording neutral dithiolate complex Ni(κ³-SNS)(IPr) (8). Reaction products were characterized by NMR and mass spectrometry and complexes 1-5, 6a, 6b, 7a, and 8 by single-crystal X-ray diffraction.

Designed pincer ligand supported Co(II)-based catalysts for dehydrogenative activation of alcohols: Studies on N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines

Base-metal catalysts Co1, Co2 and Co3 were synthesized from designed pincer ligands L1, L2 and L3 having NNN donor atoms respectively. Co1, Co2 and Co3 were characterized by IR, UV-Vis. and ESI-MS spectroscopic studies. Single crystal X-ray diffraction studies were investigated to authenticate the molecular structures of Co1 and Co3. Catalysts Co1, Co2 and Co3 were utilized to study the dehydrogenative activation of alcohols for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines. Under optimized reaction conditions, a broad range of substrates including alcohols, anilines and ketones were exploited. A series of control experiments for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines were examined to understand the reaction pathway. ESI-MS spectral studies were investigated to characterize cobalt-alkoxide and cobalt-hydride intermediates. Reduction of styrene by evolved hydrogen gas during the reaction was investigated to authenticate the dehydrogenative nature of the catalysts. Probable reaction pathways were proposed for N-alkylation of amines, α-alkylation of ketones and synthesis of quinolines on the basis of control experiments and detection of reaction intermediates.

Environmentally Friendly, Photochemical Access to [ N ∧ C ∧ N ]AuIII Pincer Complexes By Oxidative Addition

Starting from commercially available DMSAuCl and diazonium salts, cationic [N∧C∧N ]Au^III complexes were synthesized in a selective, photosensitizer‐free, photochemical reaction by irradiation with blue LED light. This new protocol represents the first easy synthesis of these types of pincer complexes in moderate to excellent yield starting from a readily available gold(I) precursor with nitrogen as the only by‐product. Owing to the disadvantages of known protocols, especially the toxicity in the case of a transmetalation with mercury or the necessity for a mostly twofold excess of a gold precursor, this method offers an attractive alternative towards this kind of gold(III) complexes. In addition, the first arylated [N∧C∧N ]Au(III) pincer complex was synthesized by using this technology.

Palladium(II) Pincer Complexes of Functionalized Amides with S-Modified Cysteine and Homocysteine Residues: Cytotoxic Activity and Different Aspects of Their Biological Effect on Living Cells

In the search for potential new metal-based antitumor agents, two series of nonclassical palladium(II) pincer complexes based on functionalized amides with S-modified cysteine and homocysteine residues have been prepared and fully characterized by 1D and 2D NMR (¹H, ¹³C, COSY, HMQC or HSQC, ¹H-¹³C, and ¹H-¹⁵N HMBC) and IR spectroscopy and, in some cases, X-ray diffraction. Most of the resulting complexes exhibit a high level of cytotoxic activity against several human cancer cell lines, including colon (HCT116), breast (MCF7), and prostate (PC3) cancers. Some of the compounds under consideration are also efficient in both native and doxorubicin-resistant transformed breast cells HBL100, suggesting the prospects for the creation of therapeutic agents based on the related compounds that would be able to overcome drug resistance. An analysis of different aspects of their biological effects on living cells has revealed a remarkable ability of the S-modified derivatives to induce cell apoptosis and efficient cellular uptake of their fluorescein-conjugated counterpart, confirming the high anticancer potential of Pd(II) pincer complexes derived from functionalized amides with S-donor amino acid pendant arms.

Recent advances in organophosphorus-chalcogen and organophosphorus-pincer based macrocyclic compounds and their metal complexes

The design and development of phosphorus based macrocycles containing one or more other heteroatoms is of crucial importance for the enhancement of modern synthetic chemistry. In recent years focus on phosphorus based macromolecules has led to intriguing and innovative structures with a variety of applications, including photophysical and host-guest properties, and in organic synthesis. This article summarizes the recent advancements in the synthesis of macrocycles that consist of organophosphorus-chalcogen (P-E, P[double bond, length as m-dash]E; E = O, S, Se) and organophosphorus-pincer based macrocyclic ligands and their transition metal complexes with emphasis given to synthetic methodologies. The reactions involve the modification of simple macrocycles with phosphorus sources or phosphorus-based chalcogenating reagents. Transition metal complexes of phosphine-based macrocyclic pincer ligands and their reactivity are also included.

Terpyridine-Based 3D Metal-Organic-Frameworks: A Structure-Property Correlation

Design, synthesis, and applications of metal-organic frameworks (MOFs) are among the most salient fields of research in modern inorganic and materials chemistry. As the structure and physical properties of MOFs are mostly dependent on the organic linkers or ligands, the choice of ligand system is of utmost importance in the design of MOFs. One such crucial organic linker/ligand is terpyridine (tpy), which can adopt various coordination modes to generate an enormous number of metal-organic frameworks. These frameworks generally carry physicochemical characteristics induced by the π-electron-rich (basically N-electron-rich moiety) terpyridines. In this minireview, the construction of 3D MOFs associated with symmetrical terpyridines is discussed. These ligands can be easily derivatized at the lateral phenyl (4'-phenyl) position and incorporate additional organic functionalities. These functionalities lead to some different binding modes and form higher dimensional (3D) frameworks. Therefore, these 3D MOFs can carry multiple features along with the characteristics of terpyridines. Some properties of these MOFs, like photophysical, chemical selectivity, photocatalytic degradation, proton conductivity, and magnetism, etc. have also been discussed and correlated with their frameworks.