Cellulose biosynthesis: current views and evolving concepts

Using Small-Angle Scattering Techniques to Understand Mechanical Properties of Biopolymer-Based Biomaterials

The design and engineering of innovative biopolymer-based biomaterials for a variety of biomedical applications should be based on the understanding of the relationship between their nanoscale structure and mechanical properties. Down the road, such understanding could be fundamental to tune the properties of engineered tissues, extracellular matrices for cell delivery and proliferation/differentiation, etc. In this tutorial review, we attempt to show in what way biomaterial structural data can help to understand the bulk material properties. We begin with some background on common types of biopolymers used in biomaterials research, discuss some typical mechanical testing techniques and then review how others in the field of biomaterials have utilized small-angle scattering for material characterization. Detailed examples are then used to show the full range of possible characterization techniques available for biopolymer-based biomaterials. Future developments in the area of material characterization by small-angle scattering will undoubtedly facilitate the use of structural data to control the kinetics of assembly and final properties of prospective biomaterials.

Classification, naming and evolutionary history of glycosyltransferases from sequenced green and red algal genomes

The Archaeplastida consists of three lineages, Rhodophyta, Virideplantae and Glaucophyta. The extracellular matrix of most members of the Rhodophyta and Viridiplantae consists of carbohydrate-based or a highly glycosylated protein-based cell wall while the Glaucophyte covering is poorly resolved. In order to elucidate possible evolutionary links between the three advanced lineages in Archaeplastida, a genomic analysis was initiated. Fully sequenced genomes from the Rhodophyta and Virideplantae and the well-defined CAZy database on glycosyltransferases were included in the analysis. The number of glycosyltransferases found in the Rhodophyta and Chlorophyta are generally much lower then in land plants (Embryophyta). Three specific features exhibited by land plants increase the number of glycosyltransferases in their genomes: (1) cell wall biosynthesis, the more complex land plant cell walls require a larger number of glycosyltransferases for biosynthesis, (2) a richer set of protein glycosylation, and (3) glycosylation of secondary metabolites, demonstrated by a large proportion of family GT1 being involved in secondary metabolite biosynthesis. In a comparative analysis of polysaccharide biosynthesis amongst the taxa of this study, clear distinctions or similarities were observed in (1) N-linked protein glycosylation, i.e., Chlorophyta has different mannosylation and glucosylation patterns, (2) GPI anchor biosynthesis, which is apparently missing in the Rhodophyta and truncated in the Chlorophyta, (3) cell wall biosynthesis, where the land plants have unique cell wall related polymers not found in green and red algae, and (4) O-linked glycosylation where comprehensive orthology was observed in glycosylation between the Chlorophyta and land plants but not between the target proteins.

Brittle Culm1, a COBRA-like protein, functions in cellulose assembly through binding cellulose microfibrils

Cellulose represents the most abundant biopolymer in nature and has great economic importance. Cellulose chains pack laterally into crystalline forms, stacking into a complicated crystallographic structure. However, the mechanism of cellulose crystallization is poorly understood. Here, via functional characterization, we report that Brittle Culm1 (BC1), a COBRA-like protein in rice, modifies cellulose crystallinity. BC1 was demonstrated to be a glycosylphosphatidylinositol (GPI) anchored protein and can be released into cell walls by removal of the GPI anchor. BC1 possesses a carbohydrate-binding module (CBM) at its N-terminus. In vitro binding assays showed that this CBM interacts specifically with crystalline cellulose, and several aromatic residues in this domain are essential for binding. It was further demonstrated that cell wall-localized BC1 via the CBM and GPI anchor is one functional form of BC1. X-ray diffraction (XRD) assays revealed that mutations in BC1 and knockdown of BC1 expression decrease the crystallite width of cellulose; overexpression of BC1 and the CBM-mutated BC1s caused varied crystallinity with results that were consistent with the in vitro binding assay. Moreover, interaction between the CBM and cellulose microfibrils was largely repressed when the cell wall residues were pre-stained with two cellulose dyes. Treating wild-type and bc1 seedlings with the dyes resulted in insensitive root growth responses in bc1 plants. Combined with the evidence that BC1 and three secondary wall cellulose synthases (CESAs) function in different steps of cellulose production as revealed by genetic analysis, we conclude that BC1 modulates cellulose assembly by interacting with cellulose and affecting microfibril crystallinity.

Cellulose is an important natural resource with great economic value. Plant cellulose packs laterally into a complicated crystallographic structure, which determines cellulose quality and commercial uses. However, the mechanism of cellulose crystallization is poorly understood. Here we report that Brittle Culm1 (BC1), a COBRA-like (COBL) protein of rice, modifies cellulose crystallinity. Although previous studies have indicated the involvement of COB and COBL proteins in cellulose biosynthesis, the underlying molecular basis for this remains elusive. We demonstrate that BC1 localizes to the cell-wall and functions in a process that is distinct from that of the three secondary wall cellulose synthases (CESAs). A carbohydrate-binding module (CBM) at the N-terminus of BC1 interacts specifically with crystalline cellulose and regulates microfibril crystallite size. We conclude that BC1 modulates cellulose structure by binding to cellulose and affecting microfibril crystallinity. These findings provide new insights into the mechanism of cellulose assembly and further our understanding of the roles of COB and COBLs in cell wall biogenesis.

Purification and characterization of a soluble β-1,4-glucan from bean (Phaseolus vulgaris L.)-cultured cells dehabituated to dichlobenil

Bean cells habituated to grow in the presence of dichlobenil exhibited reduced cellulose and hemicellulose content and an increase in pectic polysaccharides. Furthermore, following the extraction of pectins and hemicelluloses, a large amount of neutral sugars was released. These sugars were found to be part of a soluble β-1,4-glucan in a preliminary characterization, as reported by Encina et al. (Physiol Plant 114:182-191, 2002). When habituated cells were subcultured in the absence of the herbicide (dehabituated cells), the release of neutral sugars after the extraction of pectins and hemicelluloses was maintained. In this study, we have isolated a soluble β-1,4-glucan from dehabituated cells by sonication of the wall residue (cellulose fraction) remaining after fractionation. Gel filtration chromatography revealed that its average molecular size was 14 kDa. Digestion of the sample with endocellulase revealed the presence of cellobiose, cellotriose, and cellotetraose. Methylation analysis showed that 4-linked glucose was the most abundant sugar residue, but 4,6-linked glucose, terminal arabinose and 4-linked galactose for xyloglucan, and arabinogalactan were also identified. NMR analysis showed that this 1,4-glucan may be composed of various kinds of substitutions along the glucan backbone together with acetyl groups linked to the OH group of sugar residues. Thus, despite its relatively high molecular mass, the β-glucan remains soluble because of its unique configuration. This is the first time that a glucan with such characteristics has been isolated and described. The discovery of new molecules, as this β-glucan with unique features, may help understand the composition and arrangement of the polymers within plant cell walls, contributing to a better understanding of this complex structure.

Tertiary model of a plant cellulose synthase

A 3D atomistic model of a plant cellulose synthase (CESA) has remained elusive despite over forty years of experimental effort. Here, we report a computationally predicted 3D structure of 506 amino acids of cotton CESA within the cytosolic region. Comparison of the predicted plant CESA structure with the solved structure of a bacterial cellulose-synthesizing protein validates the overall fold of the modeled glycosyltransferase (GT) domain. The coaligned plant and bacterial GT domains share a six-stranded β-sheet, five α-helices, and conserved motifs similar to those required for catalysis in other GT-2 glycosyltransferases. Extending beyond the cross-kingdom similarities related to cellulose polymerization, the predicted structure of cotton CESA reveals that plant-specific modules (plant-conserved region and class-specific region) fold into distinct subdomains on the periphery of the catalytic region. Computational results support the importance of the plant-conserved region and/or class-specific region in CESA oligomerization to form the multimeric cellulose-synthesis complexes that are characteristic of plants. Relatively high sequence conservation between plant CESAs allowed mapping of known mutations and two previously undescribed mutations that perturb cellulose synthesis in Arabidopsis thaliana to their analogous positions in the modeled structure. Most of these mutation sites are near the predicted catalytic region, and the confluence of other mutation sites supports the existence of previously undefined functional nodes within the catalytic core of CESA. Overall, the predicted tertiary structure provides a platform for the biochemical engineering of plant CESAs.

Fast and continuous preparation of high polymerization degree cellulose nanofibrils and their three-dimensional macroporous scaffold fabrication

C6-carboxy-cellulose with a carboxylate content of 0.8 mmol g(-1) was obtained by oxidation of once-dried cellulose, using the 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)/NaClO/NaClO2 system at pH 6.8 and 60 °C for 16 h. This method, with the addition of reagents in the order TEMPO, NaClO and NaClO2, was 38 h faster than a previously published method. Individualized cellulose nanofibrils with a width of 3-5 nm and a length of several hundred nanometers were prepared by homogenizing the C6-carboxy-cellulose-water suspension. Macroporous cellulose nanofibril/poly(vinyl alcohol) scaffolds with interconnected large pores of 20-100 μm diameter and small pores of 2-10 μm diameter were fabricated. The cellulose nanofilaments formed nanofibrous structures on the surface of the PVA wall, which was similar to that of the collagen skeleton of the extracellular matrix. NIH/3T3 cells were cultured in the scaffolds for 4 weeks, SEM observation showed that the cells were anchored and clustered on the cellulose nanofilaments, forming spherical colonies. The extracellular matrix (ECM) was filled with mineralized particles.

Brittle Culm1, a COBRA-like protein, functions in cellulose assembly through binding cellulose microfibrils

Cellulose represents the most abundant biopolymer in nature and has great economic importance. Cellulose chains pack laterally into crystalline forms, stacking into a complicated crystallographic structure. However, the mechanism of cellulose crystallization is poorly understood. Here, via functional characterization, we report that Brittle Culm1 (BC1), a COBRA-like protein in rice, modifies cellulose crystallinity. BC1 was demonstrated to be a glycosylphosphatidylinositol (GPI) anchored protein and can be released into cell walls by removal of the GPI anchor. BC1 possesses a carbohydrate-binding module (CBM) at its N-terminus. In vitro binding assays showed that this CBM interacts specifically with crystalline cellulose, and several aromatic residues in this domain are essential for binding. It was further demonstrated that cell wall-localized BC1 via the CBM and GPI anchor is one functional form of BC1. X-ray diffraction (XRD) assays revealed that mutations in BC1 and knockdown of BC1 expression decrease the crystallite width of cellulose; overexpression of BC1 and the CBM-mutated BC1s caused varied crystallinity with results that were consistent with the in vitro binding assay. Moreover, interaction between the CBM and cellulose microfibrils was largely repressed when the cell wall residues were pre-stained with two cellulose dyes. Treating wild-type and bc1 seedlings with the dyes resulted in insensitive root growth responses in bc1 plants. Combined with the evidence that BC1 and three secondary wall cellulose synthases (CESAs) function in different steps of cellulose production as revealed by genetic analysis, we conclude that BC1 modulates cellulose assembly by interacting with cellulose and affecting microfibril crystallinity.

Molecular characterization of a cellulose synthase gene (AaxmCesA1) isolated from an Acacia auriculiformis x Acacia mangium hybrid

Cellulose is the major component of plant cell walls, providing mechanical strength to the structural framework of plants. In association with lignin, hemicellulose, protein and pectin, cellulose forms the strong yet flexible bio-composite tissue of wood. Wood formation is an essential biological process and is of significant importance to the cellulosic private sector industry. Cellulose synthase genes encode the catalytic subunits of a large protein complex responsible for the biogenesis of cellulose in higher plants. The hybrid Acacia auriculiformis x Acacia mangium represents an important source of tree cellulose for forest-based product manufacturing, with enormous economic potential. In this work, we isolate the first cellulose synthase gene, designated AaxmCesA1, from this species. The isolated full-length AaxmCesA1 cDNA encodes a polypeptide of 1,064 amino acids. Sequence analyses revealed that AaxmCesA1 cDNA possesses the key motif characteristics of a CesA protein. AaxmCesA1 shares more than 75 % amino acid sequence identity with CesA proteins from other plant species. Subsequently, the full-length AaxmCesA1 gene of 7,389 bp with partial regulatory and 13 intron regions was also isolated. Relative gene expression analysis by quantitative PCR in different tissues of the Acacia hybrid, suggests the involvement of the AaxmCesA1 gene in primary cell wall synthesis of rapidly dividing young root cells. Similarity analyses using Blast algorithms also suggests a role in primary cell wall deposition in the Acacia hybrid. Southern analysis predicts that AaxmCesA1 is a member of a multigene family with at least two isoforms in the genome of the Acacia hybrid.

Toxic misfolding of Arabidopsis cellulases in the secretory pathway of Pichia pastoris

Plants produce a large number of cellulases that are either secreted or anchored in the plasma membrane where they likely function in various aspects of cellulose synthesis, modification and degradation during plant growth and development. Very few of these enzymes have been characterized in any detail, however. Here we attempted to produce two Arabidopsis modular cellulases, which contain a catalytic domain belonging to glycoside hydrolase family 9 (GH9) and a carbohydrate binding module (CBM), in the yeast Pichia pastoris. Neither of the intact modular enzymes was detectably produced, although the independently expressed GH9 catalytic domain of one enzyme was secreted when the protein was expressed at low temperature. Expression of intact and truncated cellulases at the standard temperature caused extensive cell lysis, with release of high concentrations of endogenous proteins into the culture medium. Cell lysis appeared to result from misfolding of cellulase proteins within the Pichia secretory pathway. The toxicity of these misfolded cellulases potentially could be exploited to derive host strains with enhanced capability to fold recombinant secretory proteins.

Cellulose nanofibrils prepared from softwood cellulose by TEMPO/NaClO/NaClO₂ systems in water at pH 4.8 or 6.8

Catalytic oxidation of softwood cellulose using NaClO and either 2,2,6,6-tetramethylpiperidine-1-oxyl (4-H-TEMPO) or 4-acetamido-TEMPO (4-AcNH-TEMPO) was applied with NaClO(2) used as a primary oxidant in an aqueous buffer at pH 4.8 or 6.8. When the 4-AcNH-TEMPO-mediated oxidation was applied to softwood cellulose in water at pH 4.8 and 40 °C, the carboxylate content rose to ∼1.3 mmol/g after reaction for 48 h and the DP(v) value was more than 1100. This 4-AcNH-TEMPO-oxidized softwood cellulose was mostly converted to individual nanofibrils by mechanical disintegration in water, with uniform widths of 3-4 nm and lengths greater than 1 μm.

Cellulose factories: advancing bioenergy production from forest trees

Fast-growing, short-rotation forest trees, such as Populus and Eucalyptus, produce large amounts of cellulose-rich biomass that could be utilized for bioenergy and biopolymer production. Major obstacles need to be overcome before the deployment of these genera as energy crops, including the effective removal of lignin and the subsequent liberation of carbohydrate constituents from wood cell walls. However, significant opportunities exist to both select for and engineer the structure and interaction of cell wall biopolymers, which could afford a means to improve processing and product development. The molecular underpinnings and regulation of cell wall carbohydrate biosynthesis are rapidly being elucidated, and are providing tools to strategically develop and guide the targeted modification required to adapt forest trees for the emerging bioeconomy. Much insight has already been gained from the perturbation of individual genes and pathways, but it is not known to what extent the natural variation in the sequence and expression of these same genes underlies the inherent variation in wood properties of field-grown trees. The integration of data from next-generation genomic technologies applied in natural and experimental populations will enable a systems genetics approach to study cell wall carbohydrate production in trees, and should advance the development of future woody bioenergy and biopolymer crops.

Enzymatic synthesis of cellulose II-like substance via cellulolytic enzyme-mediated transglycosylation in an aqueous medium

The enzymatic synthesis of cellulose-like substance via a non-biosynthetic pathway has been achieved by transglycosylation in an aqueous system of the corresponding substrate, cellotriose for cellulolytic enzyme endo-acting endoglucanase I (EG I) from Hypocrea jecorina. A significant amount of water-insoluble product precipitated out from the reaction system. MALDI-TOF mass analysis showed that the resulting precipitate had a degree of polymerization (DP) of up to 16 from cellotriose. Solid-state (13)C NMR spectrum of the resulting water-insoluble product revealed that all carbon resonance lines were assigned to two kinds of anhydroglucose residues in the corresponding structure of cellulose II. X-ray diffraction (XRD) measurement as well as (13)C NMR analysis showed that the crystal structure corresponds to cellulose II with a high degree of crystallinity. We propose the multiple oligomers form highly crystalline cellulose II as a result of self-assembly via oligomer-oligomer interaction when they precipitate.

The missing link: do cortical microtubules define plasma membrane nanodomains that modulate cellulose biosynthesis?

Cellulose production is a crucial aspect of plant growth and development. It is functionally linked to cortical microtubules, which self-organize into highly ordered arrays often situated in close proximity to plasma membrane-bound cellulose synthase complexes (CSCs). Although most models put forward to explain the microtubule-cellulose relationship have considered mechanisms by which cortical microtubule arrays influence the orientation of cellulose microfibrils, little attention has been paid to how microtubules affect the physicochemical properties of cellulose. A recent study using the model system Arabidopsis, however, indicates that microtubules can modulate the crystalline and amorphous content of cellulose microfibrils. Microtubules are required during rapid growth for reducing crystalline content, which is predicted to increase the degree to which cellulose is tethered by hemicellulosic polysaccharides. Such tethering is, in turn, critical for maintaining unidirectional cell expansion. In this article, we hypothesize that cortical microtubules influence the crystalline content of cellulose either by controlling plasma membrane fluidity or by modulating the deposition of noncellulosic wall components in the vicinity of the CSCs. We discuss the current limitations of imaging technology to address these hypotheses and identify the image acquisition and processing strategies that will integrate live imaging with super resolution three-dimensional information.

Chemical genetics to examine cellulose biosynthesis

Long-term efforts to decode plant cellulose biosynthesis via molecular genetics and biochemical strategies are being enhanced by the ever-expanding scale of omics technologies. An alternative approach to consider are the prospects for inducing change in plant metabolism using exogenously supplied chemical ligands. Cellulose biosynthesis inhibitors (CBIs) have been identified among known herbicides, during diverse combinatorial chemical libraries screens, and natural chemical screens from microbial agents. In this review, we summarize the current knowledge of the inhibitory effects of CBIs and further group them by how they influence fluorescently tagged cellulose synthase A proteins. Additional attention is paid to the continuing development of the CBI toolbox to explore the cell biology and genetic mechanisms underpinning effector molecule activity.

Cellulose synthase complexes: composition and regulation

Live cell imaging has greatly advanced our knowledge on the molecular mechanism by which cellulose is deposited. Both the actin and microtubule cytoskeleton are involved in assuring the proper distribution, organization, and dynamics of cellulose synthase complexes (CSCs). This review is an update on the most recent progress on the characterization of the composition, regulation, and trafficking of CSCs. With the newly identified cellulose synthase interactive protein 1 (CSI1) on hand, we begin to unveil the mystery of an intimate relationship between cellulose microfibrils and microtubules.

BACTERIAL CELLULOSE: A NATURAL NANOMATERIAL FOR BIOMEDICAL APPLICATIONS

Bacterial cellulose (BC) synthesized from Acetobacter xylinum has drawn lots of attention and interest from biomedical device field due to its unique structure and properties. Characterized by its remarkable physical strength and extremely hydrophilic surface, BC has become a favorable material for wound healing, neuron protection, and vascular grafts. Moreover, due to its homologous structure with native extracellular matrix, BC nanofibrous matrix could also be a potent candidate for tissue-engineered scaffolding materials. In this review, the characters and properties of BC, as a promising material for regenerative medicine, are summarized. The progresses made on application of BC to wound dressing, vascular grafts, meniscus and cartilage repair, bone healing, and other biomedical fields are expatiated in details. In the end, the future expectation of BC is briefly discussed. Overall, this low cost, biocompatible, and versatile nanomaterial could eventually be developed as an excellent platform for a new generation of medical device and regenerative medicine.

Biosynthesis of the Pseudomonas aeruginosa Extracellular Polysaccharides, Alginate, Pel, and Psl

Pseudomonas aeruginosa thrives in many aqueous environments and is an opportunistic pathogen that can cause both acute and chronic infections. Environmental conditions and host defenses cause differing stresses on the bacteria, and to survive in vastly different environments, P. aeruginosa must be able to adapt to its surroundings. One strategy for bacterial adaptation is to self-encapsulate with matrix material, primarily composed of secreted extracellular polysaccharides. P. aeruginosa has the genetic capacity to produce at least three secreted polysaccharides; alginate, Psl, and Pel. These polysaccharides differ in chemical structure and in their biosynthetic mechanisms. Since alginate is often associated with chronic pulmonary infections, its biosynthetic pathway is the best characterized. However, alginate is only produced by a subset of P. aeruginosa strains. Most environmental and other clinical isolates secrete either Pel or Psl. Little information is available on the biosynthesis of these polysaccharides. Here, we review the literature on the alginate biosynthetic pathway, with emphasis on recent findings describing the structure of alginate biosynthetic proteins. This information combined with the characterization of the domain architecture of proteins encoded on the Psl and Pel operons allowed us to make predictive models for the biosynthesis of these two polysaccharides. The results indicate that alginate and Pel share certain features, including some biosynthetic proteins with structurally or functionally similar properties. In contrast, Psl biosynthesis resembles the EPS/CPS capsular biosynthesis pathway of Escherichia coli, where the Psl pentameric subunits are assembled in association with an isoprenoid lipid carrier. These models and the environmental cues that cause the cells to produce predominantly one polysaccharide over the others are subjects of current investigation.

Sensing the structural differences in cellulose from apple and bacterial cell wall materials by Raman and FT-IR spectroscopy

Raman and Fourier Transform Infrared (FT-IR) spectroscopy was used for assessment of structural differences of celluloses of various origins. Investigated celluloses were: bacterial celluloses cultured in presence of pectin and/or xyloglucan, as well as commercial celluloses and cellulose extracted from apple parenchyma. FT-IR spectra were used to estimate of the I_β content, whereas Raman spectra were used to evaluate the degree of crystallinity of the cellulose. The crystallinity index (X_C^RAMAN%) varied from −25% for apple cellulose to 53% for microcrystalline commercial cellulose. Considering bacterial cellulose, addition of xyloglucan has an impact on the percentage content of cellulose I_β. However, addition of only xyloglucan or only pectins to pure bacterial cellulose both resulted in a slight decrease of crystallinity. However, culturing bacterial cellulose in the presence of mixtures of xyloglucan and pectins results in an increase of crystallinity. The results confirmed that the higher degree of crystallinity, the broader the peak around 913 cm⁻¹. Among all bacterial celluloses the bacterial cellulose cultured in presence of xyloglucan and pectin (BCPX) has the most similar structure to those observed in natural primary cell walls.

Cellulose nanomaterials review: structure, properties and nanocomposites

This critical review provides a processing-structure-property perspective on recent advances in cellulose nanoparticles and composites produced from them. It summarizes cellulose nanoparticles in terms of particle morphology, crystal structure, and properties. Also described are the self-assembly and rheological properties of cellulose nanoparticle suspensions. The methodology of composite processing and resulting properties are fully covered, with an emphasis on neat and high fraction cellulose composites. Additionally, advances in predictive modeling from molecular dynamic simulations of crystalline cellulose to the continuum modeling of composites made with such particles are reviewed (392 references).

Toward the mechanism of NH(4) (+) sensitivity mediated by Arabidopsis GDP-mannose pyrophosphorylase

The ascorbic acid (AA)-deficient Arabidopsis thaliana mutant vtc1-1, which is defective in GDP-mannose pyrophosphorylase (GMPase), exhibits conditional hypersensitivity to ammonium (NH(4) (+) ), a phenomenon that is independent of AA deficiency. As GMPase is important for GDP-mannose biosynthesis, a nucleotide sugar necessary for protein N-glycosylation, it has been thought that GDP-mannose deficiency is responsible for the growth defect in vtc1-1 in the presence of NH(4) (+) . Therefore, the motivation for this work was to elucidate the growth and developmental processes that are affected in vtc1-1 in the presence of NH(4) (+) and to determine whether GDP-mannose deficiency generally causes NH(4) (+) sensitivity. Furthermore, as NH(4) (+) may alter cytosolic pH, we investigated the responses of vtc1-1 to pH changes in the presence and absence of NH(4) (+) . Using qRT-PCR and staining procedures, we demonstrate that defective N-glycosylation in vtc1-1 contributes to cell wall, membrane and cell cycle defects, resulting in root growth inhibition in the presence of NH(4) (+) . However, by using mutants acting upstream of vtc1-1 and contributing to GDP-mannose biosynthesis, we show that GDP-mannose deficiency does not generally lead to and is not the primary cause of NH(4) (+) sensitivity. Instead, our data suggest that GMPase responds to pH alterations in the presence of NH(4) (+) .

Apo- and cellopentaose-bound structures of the bacterial cellulose synthase subunit BcsZ

Cellulose, a very abundant extracellular polysaccharide, is synthesized in a finely tuned process that involves the activity of glycosyl-transferases and hydrolases. The cellulose microfibril consists of bundles of linear β-1,4-glucan chains that are synthesized inside the cell; however, the mechanism by which these polymers traverse the cell membrane is currently unknown. In Gram-negative bacteria, the cellulose synthase complex forms a trans-envelope complex consisting of at least four subunits. Although three of these subunits account for the synthesis and translocation of the polysaccharide, the fourth subunit, BcsZ, is a periplasmic protein with endo-β-1,4-glucanase activity. BcsZ belongs to family eight of glycosyl-hydrolases, and its activity is required for optimal synthesis and membrane translocation of cellulose. In this study we report two crystal structures of BcsZ from Escherichia coli. One structure shows the wild-type enzyme in its apo form, and the second structure is for a catalytically inactive mutant of BcsZ in complex with the substrate cellopentaose. The structures demonstrate that BcsZ adopts an (α/α)(6)-barrel fold and that it binds four glucan moieties of cellopentaose via highly conserved residues exclusively on the nonreducing side of its catalytic center. Thus, the BcsZ-cellopentaose structure most likely represents a posthydrolysis state in which the newly formed nonreducing end has already left the substrate binding pocket while the enzyme remains attached to the truncated polysaccharide chain. We further show that BcsZ efficiently degrades β-1,4-glucans in in vitro cellulase assays with carboxymethyl-cellulose as substrate.

Cellulose synthase interacting protein: a new factor in cellulose synthesis

Cellulose is the most abundant biopolymer on earth. The great abundance of cellulose places it at the forefront as a primary source of biomass for renewable biofuels. However, the knowledge of how plant cells make cellulose remains very rudimentary. Cellulose microfibrils are synthesized at the plasma membrane by hexameric protein complexes, also known as cellulose synthase complexes. The only known components of cellulose synthase complexes are cellulose synthase (CESA) proteins until the recent identification of a novel component. CSI1, which encodes CESA interacting protein 1 (CSI1) in Arabidopsis. CSI1, as the first non-CESA proteins associated with cellulose synthase complexes, opens up many opportunities.

Proteomic analysis of membrane preparations from developing Pinus radiata compression wood

For coniferous gymnosperms, few data exist as to the contribution of the membrane-associated proteome to cell wall and wood formation. In this study, we begin to address this knowledge deficiency by examining the proteomic profile of Golgi-enriched membrane preparations derived from developing Pinus radiata compression wood. These membrane preparations were generated by a combination of discontinuous sucrose gradient centrifugation and Triton X-114-based phase separation. Fractionation by phase separation removed contaminating proteins associated with the cytoskeleton and enabled the discrimination between soluble and membrane-bound/integral proteins. The proteomic analysis of the resulting aqueous and detergent phases using high-performance liquid chromatography-tandem mass spectrometry resulted in the identification of 175 proteins. The majority of the identified proteins were membrane bound/integral and originated from cellular components such as the nucleus, plastids, endoplasmic reticulum, plasma membrane and Golgi vesicles. On the basis of bioinformatic analysis, many of the identified proteins were predicted to be involved either in the regulation of wood formation or in cell wall biosynthesis, which indicated that the proteomic analysis of non-cytosolic proteins in developing xylem is a useful strategy to investigate the molecular aspects of wood formation in pine.

Structure of bacterial cellulose synthase subunit D octamer with four inner passageways

The cellulose synthesizing terminal complex consisting of subunits A, B, C, and D in Acetobacter xylinum spans the outer and inner cell membranes to synthesize and extrude glucan chains, which are assembled into subelementary fibrils and further into a ribbon. We determined the structures of subunit D (AxCeSD/AxBcsD) with both N- and C-terminal His(6) tags, and in complex with cellopentaose. The structure of AxCeSD shows an exquisite cylinder shape (height: ∼65 Å, outer diameter: ∼90 Å, and inner diameter: ∼25 Å) with a right-hand twisted dimer interface on the cylinder wall, formed by octamer as a functional unit. All N termini of the octamer are positioned inside the AxCeSD cylinder and create four passageways. The location of cellopentaoses in the complex structure suggests that four glucan chains are extruded individually through their own passageway along the dimer interface in a twisted manner. The complex structure also shows that the N-terminal loop, especially residue Lys6, seems to be important for cellulose production, as confirmed by in vivo assay using mutant cells with axcesD gene disruption and N-terminus truncation. Taking all results together, a model of the bacterial terminal complex is discussed.

A CESA from Griffithsia monilis (Rhodophyta, Florideophyceae) has a family 48 carbohydrate-binding module

Cellulose synthases form rosette terminal complexes in the plasma membranes of Streptophyta and various linear terminal complexes in other taxa. The sequence of a putative CESA from Griffithsia monilis (Rhodophyta, Floridiophyceae) was deduced using a cloning strategy involving degenerate primers, a cDNA library screen, and 5' and 3' rapid amplification of cDNA ends (RACE). RACE identified two alternative transcriptional starts and four alternative polyadenylation sites. The first translation start codon provided an open reading frame of 2610 bp encoding 870 amino acids and was PCR amplified without introns from genomic DNA. Southern hybridization indicated one strongly hybridizing gene with possible weakly related genes or pseudogenes. Amino acid sequence analysis identified a family 48 carbohydrate-binding module (CBM) upstream of the protein's first predicted transmembrane domain. There are broad similarities in predicted 3D structures of the family 48 modules from CESA, from several glycogen- and starch-binding enzymes, and from protein kinases, but there are substitutions at some residues thought to be involved in ligand binding. The module in G. monilis CESA will be on the cytoplasmic face of the plasma membrane so that it could potentially bind either low molecular weight ligands or starch which is cytosolic rather than inside membrane-bound plastids in red algae. Possible reasons why red algal CESAs have evolved family 48 modules perhaps as part of a system to regulate cellulose synthase activity in relation to cellular carbohydrate status are briefly discussed.

Mutations of cellulose synthase (CESA1) phosphorylation sites modulate anisotropic cell expansion and bidirectional mobility of cellulose synthase

The CESA1 component of cellulose synthase is phosphorylated at sites clustered in two hypervariable regions of the protein. Mutations of the phosphorylated residues to Ala (A) or Glu (E) alter anisotropic cell expansion and cellulose synthesis in rapidly expanding roots and hypocotyls. Expression of T166E, S686E, or S688E mutants of CESA1 fully rescued the temperature sensitive cesA1-1 allele (rsw1) at a restrictive temperature whereas mutations to A at these positions caused defects in anisotropic cell expansion. However, mutations to E at residues surrounding T166 (i.e., S162, T165, and S167) caused opposite effects. Live-cell imaging of fluorescently labeled CESA showed close correlations between tissue or cell morphology and patterns of bidirectional motility of CESA complexes in the plasma membrane. In the WT, CESA complexes moved at similar velocities in both directions along microtubule tracks. By contrast, the rate of movement of CESA particles was directionally asymmetric in mutant lines that exhibited abnormal tissue or cell expansion, and the asymmetry was removed upon depolymerizing microtubules with oryzalin. This suggests that phosphorylation of CESA differentially affects a polar interaction with microtubules that may regulate the length or quantity of a subset of cellulose microfibrils and that this, in turn, alters microfibril structure in the primary cell wall resulting in or contributing to the observed defect in anisotropic cell expansion.

Characterization of cellulose synthase complexes in Populus xylem differentiation

*It is generally hypothesized that the synthesis of cellulose in higher plants is mediated by cellulose synthase complexes (CSCs) localized on the plasma membrane. However, CSCs have not been investigated thoroughly through their isolation. The availability of ample Populus tissue allowed Populus CSCs to be isolated and characterized in association with xylem differentiation. *The methods used here included co-immunoprecipitation, proteomic analysis, laser microdissection, immunolocalization and others. *Western blot analysis of the immunoprecipitated CSCs led to the identification of at least two types of CSC in the membrane protein of Populus xylem tissue. Proteomic analysis further revealed that the two types of CSC were assembled from different cellulose synthase proteins. Immunolocalization confirmed that both types of CSC were involved in secondary cell wall formation. In addition, a number of noncellulose synthase proteins were also identified in association with CSC precipitation. *The results indicate that two types of CSC participate in secondary wall formation in Populus, suggesting a new mechanism of cellulose formation involved in the thickening of wood cell walls. This study also suggests that the CSC machinery may be aided by other proteins in addition to cellulose synthase proteins.

The maize mixed-linkage (1->3),(1->4)-beta-D-glucan polysaccharide is synthesized at the golgi membrane

With the exception of cellulose and callose, the cell wall polysaccharides are synthesized in Golgi membranes, packaged into vesicles, and exported to the plasma membrane where they are integrated into the microfibrillar structure. Consistent with this paradigm, several published reports have shown that the maize (Zea mays) mixed-linkage (1-->3),(1-->4)-beta-D-glucan, a polysaccharide that among angiosperms is unique to the grasses and related Poales species, is synthesized in vitro with isolated maize coleoptile Golgi membranes and the nucleotide-sugar substrate, UDP-glucose. However, a recent study reported the inability to detect the beta-glucan immunocytochemically at the Golgi, resulting in a hypothesis that the mixed-linkage beta-glucan oligomers may be initiated at the Golgi but are polymerized at the plasma membrane surface. Here, we demonstrate that (1-->3),(1-->4)-beta-D-glucans are detected immunocytochemically at the Golgi of the developing maize coleoptiles. Further, when maize seedlings at the third-leaf stage were pulse labeled with [(14)C]O(2) and Golgi membranes were isolated from elongating cells at the base of the developing leaves, (1-->3),(1-->4)-beta-D-glucans of an average molecular mass of 250 kD and higher were detected in isolated Golgi membranes. When the pulse was followed by a chase period, the labeled polysaccharides of the Golgi membrane diminished with subsequent transfer to the cell wall. (1-->3),(1-->4)-beta-D-Glucans of at least 250 kD were isolated from cell walls, but much larger aggregates were also detected, indicating a potential for intermolecular interactions with glucuronoarabinoxylans or intermolecular grafting in muro.

Membrane fusion process and assembly of cell wall during cytokinesis in the brown alga, Silvetia babingtonii (Fucales, Phaeophyceae)

During cytokinesis in brown algal cells, Golgi-derived vesicles (GVs) and flat cisternae (FCs) are involved in building the new cell partition membrane. In this study, we followed the membrane fusion process in Silvetia babingtonii zygotes using electron microscopy together with rapid freezing and freeze substitution. After mitosis, many FCs were formed around endoplasmic reticulum clusters and these then spread toward the future cytokinetic plane. Actin depolymerization using latrunculin B prevented the appearance of the FCs. Fusion of GVs to FCs resulted in structures that were thicker and more elongated (EFCs; expanded flat cisternae). Some complicated membranous structures (MN; membranous network) were formed by interconnection of EFCs and following the arrival of additional GVs. The MN grew into membranous sacs (MSs) as gaps between the MNs disappeared. The MSs were observed in patches along the cytokinetic plane. Neighboring MSs were united to form the new cell partition membrane. An immunocytochemical analysis indicated that fucoidan was synthesized in Golgi bodies and transported by vesicles to the future cytokinetic plane, where the vesicles fused with the FCs. Alginate was not detected until the MS phase. Incubation of sections with cellulase-gold showed that the cellulose content of the new cross wall was not comparable to that of the parent cell wall.

Sucrose synthase is an integral component of the cellulose synthesis machinery

Cellulose synthesis in plants is believed to be carried out by the plasma membrane-associated rosette structure which can be observed by electron microscopy. Despite decade-long speculation, it had not been demonstrated whether the rosette is the site of catalytic activity of cellulose synthesis. To determine the relationship between this structure and cellulose synthesis, we successfully isolated detergent-insoluble rosettes from the plasma membrane of bean epicotyls. However, the purified rosettes did not possess cellulose synthesis activity in vitro. Conversely, detergent-soluble granular particles of approximately 9.5-10 nm diameter were also isolated and exhibited UDP-glucose binding activity and possessed beta-1,4-glucan (cellulose) synthesis activity in vitro. The particle, referred to as the catalytic unit of cellulose synthesis, was enriched with a 78 kDa polypeptide which was verified as sucrose synthase like by mass spectrometry and immunoblotting. The catalytic units were able to bind to the rosettes and retained the cellulose synthesis activity in the presence of UDP-glucose or sucrose plus UDP when supplemented with magnesium. The incorporation of the catalytic unit into the rosette structure was confirmed by immunogold labeling with anti-sucrose synthase antibodies under an electron microscope. Our results suggest that the plasma membrane-associated rosette anchors the catalytic unit of cellulose synthesis to form the functional cellulose synthesis machinery.

Biosynthesis of callose and cellulose by detergent extracts of tobacco cell membranes and quantification of the polymers synthesized in vitro

The conditions that favor the in vitro synthesis of cellulose from tobacco BY-2 cell extracts were determined. The procedure leading to the highest yield of cellulose consisted of incubating digitonin extracts of membranes from 11-day-old tobacco BY-2 cells in the presence of 1 mM UDP-glucose, 8 mM Ca(2+) and 8 mM Mg(2+). Under these conditions, up to nearly 40% of the polysaccharides synthesized in vitro corresponded to cellulose, the other polymer synthesized being callose. Transmission electron microscopy analysis revealed the occurrence of two types of structures in the synthetic reactions. The first type consisted of small aggregates with a diameter between 3 and 5 nm that associated to form fibrillar strings of a maximum length of 400 nm. These structures were sensitive to the acetic/nitric acid treatment of Updegraff and corresponded to callose. The second type of structures was resistant to the Updegraff reagent and corresponded to straight cellulose microfibrils of 2-3 nm in diameter and 200 nm to up to 5 microm in length. In vitro reactions performed on electron microscopy grids indicated that the minimal rate of microfibril elongation in vitro is 120 nm/min. Measurements of retardance by liquid crystal polarization microscopy as a function of time showed that small groups of microfibrils increased in retardance by up to 0.047 nm/min per pixel, confirming the formation of organized structures.

Development of Langmuir-Schaeffer cellulose nanocrystal monolayers and their interfacial behaviors

Model cellulose surfaces based on cellulose nanocrystals (CNs) were prepared by the Langmuir-Schaeffer technique. Cellulose nanocrystals were obtained by acid hydrolysis of different natural fibers, producing rodlike nanoparticles with differences in charge density, aspect ratio, and crystallinity. Dioctadecyldimethylammonium bromide (DODA-Br) cationic surfactant was used to create CN-DODA complexes that allowed transfer of the CNs from the air/liquid interface in an aqueous suspension to hydrophobic solid substrates. Langmuir-Schaeffer horizontal deposition at various surface pressures was employed to carry out such particle transfer that resulted in CN monolayers coating the substrate. The morphology and chemical composition of the CN films were characterized by using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Also, their swelling behavior and stability after treatment with aqueous and alkaline solutions were studied using quartz crystal microgravimetry (QCM). Overall, it is concluded that the Langmuir-Schaeffer method can be used to produce single coating layers of CNs that were shown to be smooth, stable, and strongly attached to the solid support. The packing density of the films was controlled by selecting the right combination of surface pressure during transfer to the solid substrate and the amount of CNs available relative to the cationic charges at the interface.

Biossíntese e recentes avanços na produção de celulose bacteriana

O presente trabalho discute os recentes avanços na biossíntese e na produção de celulose bacteriana (CB) pela gram-negativa, aeróbia e aceto-ácida Gluconacetobacter. xylinus. A CB se difere de seu par vegetal, principalmente devido ao seu caráter de fibras nanométricas, contra o caráter micrométrico da vegetal, são extruídas através da parede celular de G. xylinus, com isso sua estrutura macroscópica é mecanicamente e fisicamente mais resistente, abrindo grandes oportunidades de aplicações tecnológicas e biológicas, muito além das obtidas pela celulose vegetal. O desafio atual está no aumento da produção de CB, que se debruça num maior entendimento de sua biossíntese para que seja possível uma posterior manipulação genético-bioquímica oriundas do recente avanço na biologia molecular e nos bioprocessos. São relacionados trabalhos utilizando a CB como base para produção de compósitos como também o que a está sendo feito de mais atual com este material biológico.