Identification of a gene, pilV, required for type 4 fimbrial biogenesis in Pseudomonas aeruginosa, whose product possesses a pre-pilin-like leader sequence

Macromolecular assembly and secretion across the bacterial cell envelope: type II protein secretion systems

A decade ago, Pugsley and colleagues reported the existence of a large region of Klebsiella DNA, distinct from the Klebsiella gene encoding pullulanase, which was necessary for secretion of this enzyme to the cell surface in Escherichia coli (d'Enfert et al., 1987a,b). The pul genes it contained proved to be the tip of an iceberg. The sequences reported before 1992 (d'Enfert et al., 1987a,b; d'Enfert & Pugsley, 1989; Pugsley & Reyss, 1990; Reyss & Pugsley, 1990) included only one gene (pulD) that matched any sequence in the data base; a 220 amino acid residue segment of PulD was 32% identical with a portion of the filamentous phage-encoded protein, pIV. But by the time the sequence of the 18.8 kb DNA fragment that contained the pul genes had been completed (Possot et al., 1992), reports of sets of homologous genes in several species of Gram-negative plant and animal pathogens had appeared. For the most part, these gene clusters were cloned by their ability to complement mutants that produced, but failed to secrete, proteins normally found in the extracellular milieu; when tested, the mutants showed reduced pathogenicity or were totally avirulent. The secreted proteins included hydrolytic enzymes such as cellulase and pectinase from plant pathogens, and proteases and toxins from animal pathogens. The multi-gene family necessary for secretion of these enzymes is now known as the type II system or the main terminal branch (MTB) of the general secretion pathway (GSP). As summarized by Pugsley et al. (1997), the current tally includes type II systems from Klebsiella oxytoca (pul), Erwinia chrysanthemi and carotovora (out), Xanthomonas campestris (xps), Pseudomonas aeruginosa (xcp), Aeromonas hydrophila (exe), and Vibrio cholerae (eps). A second type II system (sps) necessary for deposition of the S-layer on the cell surface in A. hydrophila is more similar to the X. campestris than A. hydrophila genes (Thomas & Trust, 1995). The biggest surprise has been the discovery of a complete set of type II secretion genes in E. coli K12. The E. coli genes are not expressed under normal growth conditions, and a search is underway to find inducing conditions and secretion substrates (Francetic & Pugsley, 1996). Impressive progress has already been made in defining components of the pathway. What remains to be understood in mechanistic detail is how this protein secretion system functions.

The chaperone/usher pathway: a major terminal branch of the general secretory pathway

Gram-negative bacteria assemble a variety of adhesive organelles on their surface, including the thread-like structures known as pili. Recent studies on pilus assembly by the chaperone/usher pathway have revealed new insights into the mechanisms of pilus subunit export into the periplasm and targeting to the outer membrane. Signaling events controlling pilus biogenesis have begun to emerge and investigations of the usher have yielded insights into pilus translocation across the outer membrane.

Contact stimulation of Tgl and type IV pili in Myxococcus xanthus

Myxococcus xanthus tgl mutants lack social motility and type IV pili but can be transiently stimulated to swarm and to make pili by contacting tgl+ cells. The absence of pili in tgl mutants is shown not to be due to the absence of pilin. The rate of pilus elongation after Tgl stimulation is shown to be similar to the rate of pilus elongation in wild-type cells, using a new more rapid assay for stimulation.

The secretion apparatus of Pseudomonas aeruginosa: identification of a fifth pseudopilin, XcpX (GspK family)

The xcp gene products in Pseudomonas aeruginosa are required for the secretion of proteins across the outer membrane. Four of the Xcp proteins, XcpT, U, V and W, present sequence homology to the subunits of type IV pili at their N-termini, and they were therefore designated pseudopilins. In this study, we characterized the xcpX gene product, a bitopic cytoplasmic membrane protein. Remarkably, amino acid sequence comparisons also suggested that the XcpX protein resembles the pilins and pseudopilins at the N-terminus. We show that XcpX could be processed by the prepilin peptidase, PilD/XcpA, and that the highly conserved glycine residue preceding the hydrophobic segment could not be mutated without loss of the XcpX function. We, therefore, classified XcpX (GspK) as the fifth pseudopilin of the system.

Role of BfpF, a member of the PilT family of putative nucleotide-binding proteins, in type IV pilus biogenesis and in interactions between enteropathogenic Escherichia coli and host cells

Adherence of enteropathogenic Escherichia coli (EPEC) to epithelial cells is dependent on a type IV fimbria, termed the bundle-forming pilus (BFP). A cluster of 14 genes is required for expression of BFP. The eighth gene in the cluster, bfpF, encodes a putative nucleotide-binding protein which resembles the PilT protein of Pseudomonas aeruginosa. It has been proposed that PilT is required for the retraction of the P. aeruginosa pilus, which results in twitching motility. To test the role of BfpF in BFP function and EPEC pathogenesis, two different mutations were constructed in the bfpF gene, one in the cloned gene cluster in a laboratory E. coli strain and one in wild-type EPEC. Neither mutation affected prepilin synthesis, leader sequence processing, or pilus biogenesis. However, both mutations resulted in increased localized adherence. In addition, the EPEC bfpF mutant displayed increased aggregation. The EPEC bfpF mutant was not deficient in attaching and effacing activity or invasion capacity. These results suggest that BfpF decreases aggregation and adherence by EPEC but that subsequent steps in EPEC pathogenesis do not require this protein.

Regulation of expression of the pilA gene in Myxococcus xanthus

Type IV pili are required for social gliding motility in Myxococcus xanthus. In this work, the expression of pilin (the pilA gene product) during vegetative growth and fruiting-body development was examined. A polyclonal antibody against the pilA gene product (prepilin) was prepared, along with a pilA-lacZ fusion, and was used to assay expression of pilA in M. xanthus in different mutant backgrounds. pilA expression required the response regulator pilR but was negatively regulated by the putative sensor kinase pilS. pilA expression did not require pilB, pilC, or pilT. pilA was also autoregulated; a mutation which altered an invariant glutamate five residues from the presumed prepilin processing site eliminated this autoregulation, as did a deletion of the pilA gene. Primer extension and S1 nuclease analysis identified a sigma54 promoter upstream of pilA, consistent with the homology of pilR to the NtrC family of response regulators. Expression of pilA was found to be developmentally regulated; however, the timing of this expression pattern was not entirely dependent on pilS or pilR. Finally, pilA expression was induced by high nutrient concentrations, an effect that was also not dependent on pilS or pilR.

Genes involved in the biogenesis and function of type-4 fimbriae in Pseudomonas aeruginosa

Type-4 fimbriae are filamentous polar organelles which are found in a wide variety of pathogenic bacteria. Their biogenesis and function is proving to be extremely complex, involving the expression and coordinate regulation of a large number of genes. Type-4 fimbriae mediate attachment to host epithelial tissues and a form of surface translocation called twitching motility. In Pseudomonas aeruginosa they also appear to function as receptors for fimbrial-dependent bacteriophages. Analysis of mutants defective in fimbrial function has allowed the identification of many of the genes involved in the biogenesis of these organelles. Thus far over 30 genes have been characterized, which fall into two broad categories: those encoding regulatory networks that control the production and function of these fimbriae (and other virulence determinants such as alginate) in response to alterations in environmental conditions; and those encoding proteins involved in export and assembly of these organelles, many of which are similar to proteins involved in protein secretion and DNA uptake. These systems all appear to be closely related and to function in the assembly of surface-associated protein complexes that have been adapted to different biological functions.

Molecular genetic analysis of type-4 pilus biogenesis and twitching motility using Pseudomonas aeruginosa as a model system--a review

Genetic analysis of Pseudomonas aeruginosa pilus biogenesis and twitching motility has revealed the requirement for several pil loci which have been localized to different regions of the chromosome. One pil locus, designated pilE, resides at approx. 71 min on the PAO genetic map, a region of the chromosome previously shown to harbor a number of genes required for pilus assembly (i.e., pilA, -B, -C, -D, -R and -S). The PilE protein shows significant sequence identity to the N-terminal domain of PilA as well as to the pilin precursors from a variety of type-4 pilus producers. Included within this homologous region is a short, positively charged leader sequence followed by a prepilin peptidase cleavage site and a largely hydrophobic region. Additionally, an unlinked set of pil genes, designated pilG, -H, -I, -J and -K, has been localized to the SpeI fragment H which corresponds to approx. 20 min on the PAO genetic map. This gene cluster encodes proteins that demonstrate remarkable similarity to the chemotaxis proteins of enterics and the gliding bacterium Myxococcus xanthus and are thought to be part of a signal transduction system that controls P. aeruginosa pilus biosynthesis and twitching motility.

Identification of a gene, pilF, required for type 4 fimbrial biogenesis and twitching motility in Pseudomonas aeruginosa

Many bacterial pathogens produce a class of surface structures called type 4 fimbriae. In Pseudomonas aeruginosa these fimbriae are responsible for adhesion and translocation across host epithelial surfaces. We have identified a novel gene involved in the complex process of type 4 fimbrial biogenesis. This gene, termed pilF, is located on SpeI fragment S at 30 min on the P. aeruginosa genomic map, which is the sixth region on the chromosome shown to contain a fimbrial-associated gene. The PilF protein has a predicted M(r) of 22402, and together with a highly homologous upstream ORF shares a chromosomal arrangement similar to that found in Haemophilus influenzae. A pilF mutant is blocked in the export/assembly of the fimbrial subunit PilA, and accumulates this protein in the membrane fraction. Complementation studies indicate that the cloned pilF gene is able to restore the expression of surface fimbriae, twitching motility and susceptibility to fimbrial-specific bacteriophage.

The molecular genetics of type-4 fimbriae in Pseudomonas aeruginosa--a review

Type-4 fimbriae (or pili) are filaments found at the poles of a wide range of bacterial pathogens, including Neisseria gonorrhoeae, Moraxella bovis, Dichelobacter nodosus and Pseudomonas aeruginosa. They are composed of a small subunit which is highly conserved among different species and appear to mediate adhesion and translocation across epithelial surfaces via a phenomenon termed "twitching motility'. These fimbriae are key host colonisation factors and important protective antigens. We have analysed the genetics and biosynthesis of type-4 fimbriae in P. aeruginosa, which is an opportunistic pathogen of compromised individuals, including those suffering cystic fibrosis, AIDS or burns. A library of P. aeruginosa transposon mutants was constructed which exhibited loss of twitching motility, as determined by altered colony morphology. Analysis of these mutants, and of similar collections by other groups, have revealed that there are at least 22 genes involved in type-4 fimbrial assembly and function. A large number (pilA, B, C, D, E, M, N, O, P, Q, T, U, V and Z) appear to be involved in the biogenesis of the fimbriae and to represent a subset of a supersystem involved in the assembly of surface-associated protein complexes. Homologs of at least some of these genes have subsequently been identified in other type-4 fimbriate bacteria. In P. aeruginosa, the system is also regulated via two signal transduction pathways-a classic sensor-regulator system (encoded by pilS, pilR and rpoN) which controls transcription of the fimbrial subunit, presumably in response to host cues, and a chemotactic system (encoded by pilG, H, I, J, K and L) which may be involved in the directional or rate control of twitching motility in response to local environmental variables.

Fimbrial biogenesis genes of Pseudomonas aeruginosa: pilW and pilX increase the similarity of type 4 fimbriae to the GSP protein-secretion systems and pilY1 encodes a gonococcal PilC homologue

Type 4 fimbriae of Pseudomonas aeruginosa are surface filaments involved in host colonization. They mediate both attachment to host epithelial cells and flagelia-independent twitching motility. Four additional genes, pilW, pilX, pilY1 and pilY2, are located on Spel fragment E in the 5 kb intergenic region between the previously characterized genes pilV and pilE, which encode prepilin-like proteins involved in type 4 fimbrial biogenesis. The phenotypes of a transposon insertion and other mutations constructed by allelic exchange show that these genes are involved in the assembly of type 4 fimbriae. The PilW and PilX proteins are membrane located, possess the hydrophobic N-terminus characteristic of prepilin-like proteins, and appear to belong to the GspJ and GspK group of proteins that are required for protein secretion in a wide range of Gram-negative bacteria. These findings increase the similarities between the fimbrial biogenesis and the Gsp-based protein-secretion supersystems. PilY1 is a large protein with C-terminal homology to the PilC2 protein of Neisseria gonorrhoeae, thought to be a fimbrial tip-associated adhesin, and which, like PilY1, is involved in fimbrial assembly. PilY1 appears to be located in both the membrane and the external fimbrial fractions. PilY2 is a small protein that appears to play a subtle role in fimbrial biogenesis and represents a new class of protein.

The alginate regulator AlgR and an associated sensor FimS are required for twitching motility in Pseudomonas aeruginosa

Mucoid strains of Pseudomonas aeruginosa isolated from the lungs of cystic fibrosis patients produce large amounts of the exopolysaccharide alginate. AlgR has long been considered a key regulator of alginate production, but its cognate sensor has not been identified. Here we show that AlgR is required for twitching motility, which is a form of bacterial surface translocation mediated by type 4 fimbriae. Adjacent to algR we have identified a sensor gene (fimS), which is also required for twitching motility. However, FimS does not appear to be required for alginate production in mucoid strains. FimS and AlgR are representative of a new subclass of two-component transmitter-receiver regulatory systems. The alternative sigma factor AlgU also affects both alginate production and twitching motility. Therefore, these two virulence determinants appear to be closely associated and coordinately regulated.

Identification of two genes with prepilin-like leader sequences involved in type 4 fimbrial biogenesis in Pseudomonas aeruginosa

Type 4 fimbriae are surface filaments produced by a range of bacterial pathogens for colonization of host epithelial surfaces. In Pseudomonas aeruginosa, they are involved in adhesion as well as in a form of surface translocation called twitching motility, and sensitivity to infection by fimbria-specific bacteriophage. Analysis of the 2.5-kb intergenic region between the previously defined pilR and pilV genes on P. aeruginosa genomic SpeI fragment E has identified three new genes, fimT, fimU, and dadA*. The predicted 18.5-kDa products of the fimT and fimU genes contain prepilin-like leader sequences, whereas the third gene, dadA*, encodes a protein similar to the D-amino acid dehydrogenase of Escherichia coli. Isogenic mutants constructed by allelic exchange demonstrated that the fimU gene was required for fimbrial biogenesis and twitching motility, whereas the fimT and dada* mutants retained wild-type phenotypes. However, overexpression of the fimT gene was found to be able to functionally replace the lack of a fimU gene product, suggesting a subtle role in fimbrial biogenesis. The identification of these proteins increases the similarity between type 4 fimbrial biogenesis and the supersystems involved in macromolecular traffic, such as extracellular protein secretion and DNA uptake, all of which now possess multiple protein species that possess prepilin-like leader sequences.

Enteropathogenic Escherichia coli: identification of a gene cluster coding for bundle-forming pilus morphogenesis

Sequence flanking the bfpA locus on the enteroadherent factor plasmid of the enteropathogenic Escherichia coli (EPEC) strain B171-8 (O111:NM) was obtained to identify genes that might be required for bundle-forming pilus (BFP) biosynthesis. Deletion experiments led to the identification of a contiguous cluster of at least 12 open reading frames, including bfpA, that could direct the synthesis of a morphologically normal BFP filament. Within the bfp gene cluster, we identified open reading frames that share homology with other type IV pilus accessory genes and with genes required for transformation competence and protein secretion. Immediately upstream of the bfp gene cluster, we identified a potential replication origin including genes that are predicted to encode proteins homologous with replicase and resolvase. Restriction fragment length polymorphism analysis of DNA from six additional EPEC serotypes showed that the organization of the bfp gene cluster and its juxtaposition with a potential plasmid origin of replication are highly conserved features of the EPEC biotype.

Physical linkage of the Vibrio cholerae mannose-sensitive hemagglutinin secretory and structural subunit gene loci: identification of the mshG coding sequence

Vibrio cholerae O1 expresses a variety of cell surface factors which mediate bacterial adherence and colonization at the intestinal epithelium. The mannose-sensitive hemagglutinin (MSHA), a type IV pilus, is a potential attachment factor of the V. cholerae El Tor biotype. We describe a TnphoA mutant that is defective in its ability to hemagglutinate mouse erythrocytes. The TnphoA insertion maps to a recently identified genetic locus that encodes products that are predicted to be essential for assembly and export of the MSHA pilus. Insertional disruption at this locus in a mshA-phoA reporter strain provides evidence for a role of this locus in the latter stages of pilus assembly and/or export. These constructs have provided physical markers by which we have established close physical linkage of this secretion locus to a set of genes that includes the mshA structural gene. Sequence analysis of the intervening region between these two loci has revealed the presence of an open reading frame with homology to pilus biogenesis genes of several gram-negative bacteria. This genetic organization suggests an entire operon encoding the MSHA pilus and the components necessary for its assembly and secretion to the bacterial cell surface. The nomenclature of the MSHA structural and secretory locus has been redefined accordingly.

Identification of a novel gene, pilZ, essential for type 4 fimbrial biogenesis in Pseudomonas aeruginosa

The opportunistic pathogen Pseudomonas aeruginosa produces type 4 fimbriae which promote adhesion to epithelial cells and are associated with a form of surface translocation called twitching motility. We have used transposon mutagenesis to identify loci required for fimbrial assembly or function by screening for mutants that lack the spreading colony morphology characteristic of twitching motility. A subset of these mutants is resistant to fimbria-specific phage. One of these mutants (R270) was found to contain a transposon insertion in a new gene, termed pilZ, which is located on chromosomal SpeI fragment I at about 40 min on the P. aeruginosa map, a position remote from other loci involved in fimbrial biogenesis. pilZ appears to be linked to and possibly forms an operon with a gene, holB*, which is homologous to the gene encoding the delta' subunit of Escherichia coli DNA polymerase III. The product of the pilZ gene is a protein of 118 amino acids (predicted molecular weight, 12,895) which probably has a cytoplasmic location. PilZ appears to be a new class of protein which has not hitherto been represented in the sequence databases, and its function is unknown. Complementation studies indicate that pilZ is able to restore the expression of fimbriae on the surface of P. aeruginosa, as well as twitching motility and sensitivity to fimbria-specific phage when provided in trans to the R270 mutant.

Molecular regulation of GLUT-4 targeting in 3T3-L1 adipocytes

Insulin stimulates glucose transport in muscle and adipose tissue by triggering the movement of the glucose transporter GLUT-4 from an intracellular compartment to the cell surface. Fundamental to this process is the intracellular sequestration of GLUT-4 in nonstimulated cells. Two distinct targeting motifs in the amino and carboxy termini of GLUT-4 have been previously identified by expressing chimeras comprised of portions of GLUT-4 and GLUT-1, a transporter isoform that is constitutively targeted to the cell surface, in heterologous cells. These motifs-FQQI in the NH2 terminus and LL in the COOH terminus-resemble endocytic signals that have been described in other proteins. In the present study we have investigated the roles of these motifs in GLUT-4 targeting in insulin-sensitive cells. Epitope-tagged GLUT-4 constructs engineered to differentiate between endogenous and transfected GLUT-4 were stably expressed in 3T3-L1 adipocytes. Targeting was assessed in cells incubated in the presence or absence of insulin by subcellular fractionation. The targeting of epitope-tagged GLUT-4 was indistinguishable from endogenous GLUT-4. Mutation of the FQQI motif (F5 to A5) caused GLUT-4 to constitutively accumulate at the cell surface regardless of expression level. Mutation of the dileucine motif (L489L490 to A489A490) caused an increase in cell surface distribution only at higher levels of expression, but the overall cells surface distribution of this mutant was less than that of the amino-terminal mutants. Both NH2- and COOH-terminal mutants retained insulin-dependent movement from an intracellular to a cell surface locale, suggesting that neither of these motifs is involved in the insulin-dependent redistribution of GLUT-4. We conclude that the phenylalanine-based NH2-terminal and the dileucine-based COOH-terminal motifs play important and distinct roles in GLUT-4 targeting in 3T3-L1 adipocytes.

Characterization of a five-gene cluster required for the biogenesis of type 4 fimbriae in Pseudomonas aeruginosa

The opportunistic pathogen Pseudomonas aeruginosa produces type 4 fimbriae which promote adhesion to epithelial cells and are associated with a form of surface translocation called twitching motility. Transposon mutagenesis was used to identify loci required for fimbrial assembly or function by screening for mutants that lack the spreading colony morphology characteristic of twitching motility. Six mutants were isolated that contain transposon insertions upstream of the previously characterized gene pilQ. This region contains four genes: pilM-P, which encode proteins with predicted sizes of 37.9, 22.2, 22.8 and 19.0 kDa, respectively. pilM-P appear to form an operon and to be expressed from a promoter in the intergenic region between pilM and the divergently transcribed upstream gene ponA. PilM-P were found to be required for fimbrial biogenesis by complementation studies using twitching motility and sensitivity to fimbrial-specific phage as indicators of the presence of functional fimbriae. This was confirmed by electron microscopy. PilO and PilP did not have homologues in the sequence databases, but the predicted PilN amino acid sequence displayed similarity to XpsL from Xanthamonas campestris, a protein required for protein secretion. PilP contained a hydrophobic leader sequence characteristic of lipoproteins, while PilN and PilO have long internal hydrophobic domains which may serve to localize them to the cytoplasmic membrane. PilM has shared sequence motifs with the cell division protein FtsA from Bacillus subtilis and Escherichia coli, as well as the rod-shape-determining protein MreB from E. coli. These motifs are also conserved in eukaryotic actin, in which they are involved in forming an ATPase domain. Deletion mutants of pilM and pilQ displayed a dominant negative phenotype when transformed into wild-type cells, suggesting that these genes encode proteins involved in multimeric structures.