Crystal structure of LacI member, PurR, bound to DNA: minor groove binding by alpha helices

A Role for the Interdomain Linker Region of the Escherichia coli CytR Regulator in Repression Complex Formation

Regulatory complexes formed by the CytR repressor protein and the cAMP receptor protein (CRP) prevent transcription initiation from several promoters in Escherichia coli. The formation of the complexes is mediated by protein-DNA interactions and protein-protein interactions between the two regulators. Interestingly, co-binding with CRP has a profound effect on the configuration of the DNA-binding targets preferred by CytR. When binding to DNA by itself, CytR binds preferentially to two octamer repeats in direct or inverted orientation, and separated by 2 bp. However, in the presence of CRP, CytR recognizes inverted repeats separated by 10-13 bp, or direct repeats separated by 1 bp. A fixed orientation of at least one CytR octamer repeat in close proximity to a CRP-binding target is a common architectural feature at promoters optimised for repression complex formation. These observations suggest that CRP alters the DNA-binding mode of CytR. Here, we have investigated the CRP-induced changes in CytR by protein footprinting and alanine-scanning mutagenesis. Our data suggest that a flexible interdomain linker region in CytR, connecting the DNA-binding domain to the dimerization domain allows the repressor protein to interact with DNA-binding sites in a highly relaxed manner, as shown previously, and plays an active role in transcription regulation. Thus, the interactions between CRP, CytR and DNA within the repression complex appear to be more extensive than anticipated. The results support and extend the view that the high degree of adaptability observed in the CytR/CRP regulatory system is obtained though multiple adjustable interactions between the implicated factors.

DNA trajectory in the Gal repressosome

The Gal repressosome is a higher-order nucleoprotein complex that represses transcription of the gal operon in Escherichia coli. During the repressosome assembly, a DNA loop is formed by the interaction of two GalR dimers, bound to two spatially separated operators, OE and OI, flanking the gal promoters. Structure-based genetic analysis indicated that GalR homodimers interact directly and form a V-shaped stacked tetramer in repressosome, further stabilized by HU binding to an architecturally critical position on the DNA. In this scheme of GalR tetramerization, the alignment of the operators in the DNA loop could be in either parallel (PL) or antiparallel (AL) mode. As each mode can have two alternative geometries differing in the mutual stacking of the OE- and OI-bound GalR dimers, it is possible to have four different DNA trajectories in the repressosome. Feasibilities of these trajectories were tested by in vitro transcription repression assays, first by isolating GalR mutants with altered operator specificity and then by constructing four different potential loops with mutant GalR heterodimers bound to specifically designed hybrid operators in such a way as to give rise to only one of the four putative trajectories. Results show that OE and OI adopt a mutual antiparallel orientation in an under-twisted DNA loop, consistent with the energetically optimal structural model. In this structure the center of the HU-binding site is located at the apex of the DNA loop. The approach reported here can be used to distinguish between otherwise indistinguishable DNA trajectories in complex nucleoprotein machines.

Controlled transcriptional regulation in eukaryotes by a novel transcription factor derived from Escherichia coli purine repressor

Unlike the DNA-binding domains (DBD) of most eukaryotic transcription factors, Escherichia coli LacI family transcription factors are unable to bind to specific target DNA sequences without a cofactor-binding domain. In the present study, we reconstructed a novel DBD designated as PurHG, which binds constitutively to a 16bp purine repressor operator, by fusion of the purine repressor (PurR) DBD (residues 1-57) and the GAL4 dimerization domain (DD, residues 42-148). Binding of PurHG to DNA requires the dimerization and a hinge helix of PurR DBD. When the PurHG was expressed as a fusion protein in a form of a transcription activator (PurAD) or an artificial nuclear receptor (PurAPR or PurAER) responding to ligand, such as RU486 or beta-estradiol, it could regulate the expression of the reporter genes in NIH3T3 cells. The prerequisite region of the GAL4 DD for DNA-binding was amino acid residues from 42 to 98 in the form of PurAD, while the amino acid residues from 42 to 75 were sufficient for ligand-dependent regulation in the form of PurAPR. These results suggest that the dimerization function of the progesterone ligand-binding domain could be substituted for region 76-98 of the GAL4 DD. In summary, the fusion of the PurR DBD and the GAL4 DD generates fully active DNA-binding protein, PurHG, in vitro and in vivo, and these results provide the direct evidence of structural predictions that the proximate positioning of PurR hinge helical regions is critical for DNA-binding.

Complementation of a Delta ccpA mutant of Lactobacillus casei with CcpA mutants affected in the DNA- and cofactor-binding domains

In low-G+C Gram-positive bacteria, the regulatory protein CcpA has been shown to play a major part in the so-called carbon catabolite repression (CCR) process, as well as in the induction of basic metabolic genes, for which it is considered a global regulator. A strain of Lactobacillus casei that carried a complete deletion of ccpA has been constructed and used to test the effect of CCR on N-acetylglucosaminidase activity and growth performance of a collection of seven CcpA mutations obtained by site-directed mutagenesis. The replaced amino acids were located in the DNA- and cofactor (P-Ser-HPr)-binding domains. Mutations in the DNA-binding domain lacked CCR, as found in Bacillus megaterium. However, mutations in the cofactor-binding domain of L. casei CcpA had a different phenotype to that observed in the previous studies with B. megaterium. Two of them, S80L and T307I, displayed a significant hyper-repression, an effect never reported before for CcpA. Comparison of growth capabilities provided by the different mutants and their ability to sustain CCR demonstrated that CCR, at least on the enzymic activity tested, and the growth defect caused by the CcpA mutations are unrelated features.

Purine and pyrimidine-specific repression of the Escherichia coli carAB operon are functionally and structurally coupled

Transcription of the carAB operon encoding the sole carbamoylphosphate synthetase of Escherichia coli proceeds from a tandem pair of promoters. P2, downstream, is repressed by arginine and the ArgR protein, whereas P1 is submitted to pyrimidine-specific regulation and as shown here to purine-specific control exerted by binding of the PurR protein to a PUR box sequence centered around nucleotide -128.5 with respect to the start of P1 transcription. In vivo analyses of the effects of trans and cis-acting mutations on the regulatory responses and single round in vitro transcription assays indicated that ligand-bound PurR is by itself unable to inhibit P1 promoter activity. To exert its effect PurR relies on the elaborated nucleoprotein complex that governs P1 activity in a pyrimidine-specific manner. Thus we reveal the existence of an unprecedented functional and structural coupling between the modulation of P1 activity by purine and pyrimidine residues that appears to result from the unique position of the PUR box in the carAB control region, far upstream of the promoter. Missing contact and premethylation binding interference studies revealed the importance of base-specific groups and of structural aspects of the PUR box sequence in complex formation. Permutation assays indicated that the overall PurR-induced bending of the carAB control region is slightly less pronounced than that of the purF operator. The PUR boxes of the carAB operon of E.coli and Salmonella typhimurium are unique in that they have a guanine residue at position eight. Interestingly, guanine at this position has been proposed to be extremely unfavorable on the basis of modeling and binding studies, as its exocyclic amino group would enter into a steric clash with the side-chain of lysine 55. To analyze the effect of guanine at position eight in the upstream half-site of the carAB operator we constructed the adenine derivative and assayed in vivo repressibility of P1 promoter activity and in vitroPurR binding to the mutant operator, and constructed a molecular model for the unusual lysine 55-guanine 8 interaction.

Recognition of 5'-YpG-3' sequences by coupled stacking/hydrogen bonding interactions with amino acid residues

The combined biochemical and structural study of hundreds of protein-DNA complexes has indicated that sequence-specific interactions are mediated by two mechanisms termed direct and indirect readout. Direct readout involves direct interactions between the protein and base-specific atoms exposed in the major and minor grooves of DNA. For indirect readout, the protein recognizes DNA by sensing conformational variations in the structure dependent on nucleotide sequence, typically through interactions with the phosphodiester backbone. Based on our recent structure of Ndt80 bound to DNA in conjunction with a search of the existing PDB database, we propose a new method of sequence-specific recognition that utilizes both direct and indirect readout. In this mode, a single amino acid side-chain recognizes two consecutive base-pairs. The 3'-base is recognized by canonical direct readout, while the 5'-base is recognized through a variation of indirect readout, whereby the conformational flexibility of the particular dinucleotide step, namely a 5'-pyrimidine-purine-3' step, facilitates its recognition by the amino acid via cation-pi interactions. In most cases, this mode of DNA recognition helps explain the sequence specificity of the protein for its target DNA.

"Antiparallel" DNA loop in gal repressosome visualized by atomic force microscopy

DNA looping is often involved in positive and negative regulation of gene transcription in both prokaryotes and eukaryotes. The transcription of the gal operon of Escherichia coli from two overlapping promoters P1 and P2 is negatively regulated via Gal repressosome assembly. It involves binding of two dimeric Gal repressor proteins (GalR) to two operators, O(E) and O(I), flanking the two promoters, and formation of 113 bp DNA loop due to tetramerization of the two bound GalR dimers. The process requires negatively supercoiled DNA and the presence of the histone-like protein HU. Previous modeling of the repressosome based on evaluation of DNA elastic energy suggested a mutual antiparallel, rather than parallel, orientation of the two gal operators in an under-twisted DNA loop. To visualize the Gal loop by atomic force microscopy (AFM), plasmid DNA molecules were constructed with increased distance between the two operators. The AFM results demonstrated the formation of an antiparallel DNA loop in the Gal repressosome consistent with our earlier hypothesis. Importantly, the overall shape of the GalR mediated loop proved to be indistinguishable from that in the chimerical loop of the same size containing two lac operators (instead of two gal operators) and formed by LacI. In addition, a possibility of the gal operon repression mediated by GalR in the absence of HU was shown in the new DNA constructs. Implications of these findings for the DNA structural organization in bacterial nucleoid are discussed.

Functional dissection of the Bacillus subtilis pur operator site

Bacillus subtilis PurR represses transcription of several genes involved in purine synthesis, metabolism, and transport and cofactor synthesis. PurR binds specifically to DNAs containing an inverted repeat of a 14-nucleotide "PurBox" located in the upstream control regions of genes in the PurR regulon. Further biochemical investigation of the interaction of PurR with a series of shortened upstream DNA fragments of the pur operon determined the minimum length and specificity elements of the operator. The relative affinities of the two PurBoxes differ significantly, such that upstream PurBox1 (-81 to -68 relative to the transcription start site) is designated "strong" and downstream PurBox2 (-49 to -36) is designated "weak." Two PurBoxes are required for high-affinity PurR binding, and one of these must be strong. The shortest DNA construct with high affinity for PurR is a 74-bp perfect palindrome in which weak PurBox2 and its flanking sequences are replaced by strong PurBox1 and flanking sequences. Two PurR dimers bind to this symmetric construct. Phosphoribosylpyrophosphate (PRPP), the effector molecule that reduces affinity of PurR for DNA, requires one weak PurBox in the DNA construct to inhibit PurR binding. PRPP binds, as expected, to a PRPP-motif in PurR. A tracks outside the central conserved CGAA sequence of the PurBox may facilitate DNA bending, leading to a proposal for strong and weak designations of PurBoxes in the control regions of other genes regulated by PurR.

Flexibility of alpha-helices: results of a statistical analysis of database protein structures

Alpha-helices stand out as common and relatively invariant secondary structural elements of proteins. However, alpha-helices are not rigid bodies and their deformations can be significant in protein function (e.g. coiled coils). To quantify the flexibility of alpha-helices we have performed a structural principal-component analysis of helices of different lengths from a representative set of protein folds in the Protein Data Bank. We find three dominant modes of flexibility: two degenerate bend modes and one twist mode. The data are consistent with independent Gaussian distributions for each mode. The mode eigenvalues, which measure flexibility, follow simple scaling forms as a function of helix length. The dominant bend and twist modes and their harmonics are reproduced by a simple spring model, which incorporates hydrogen-bonding and excluded volume. As an application, we examine the amount of bend and twist in helices making up all coiled-coil proteins in SCOP. Incorporation of alpha-helix flexibility into structure refinement and design is discussed.

Modulation of DNA-binding domains for sequence-specific DNA recognition

Sequence-specific DNA-binding proteins use diverse mechanisms to recognize their cognate DNA sites. In addition to direct sequence-specific DNA contacts made by DNA recognition domains, extrinsic factors such as ligand binding, homo- and hetero-dimeric protein associations, and association via other transcription factors can also modulate the DNA-recognition properties of DNA-binding domains. In each case, these extrinsic factors act as molecular switches to facilitate cognate DNA recognition. In this article we review the available structural examples of how such extrinsic factors can modulate the way in which a DNA-binding domain can recognize DNA. Together, these examples reveal a variety of ways in which such extrinsic factors can significantly extend the repertoire of DNA sites recognized by a given DNA-binding domain.

Genetic analysis of GalR tetramerization in DNA looping during repressosome assembly

The Gal repressosome is a nucleoprotein complex consisting of 2 GalR dimers, 1 HU, and 1 DNA loop, which represses the transcription of the gal operon. We have adopted a structure-based genetic approach to complement ongoing physical studies of the complex. Homology-based and subsequent alanine-scanning mutageneses suggest that five residues in the DNA-distal subdomain of GalR dimer are important for repressosome formation. A further analysis of these and intragenic suppressors of looping-defective GalR mutants as well as gain-of-function mutants that permit repressosome assembly in the absence of HU show that GalR dimers contact each other in the repressosome in a partially stacked configuration.

Plasticity in protein-DNA recognition: lac repressor interacts with its natural operator 01 through alternative conformations of its DNA-binding domain

The lac repressor-operator system is a model system for understanding protein-DNA interactions and allosteric mechanisms in gene regulation. Despite the wealth of biochemical data provided by extensive mutations of both repressor and operator, the specific recognition mechanism of the natural lac operators by lac repressor has remained elusive. Here we present the first high-resolution structure of a dimer of the DNA-binding domain of lac repressor bound to its natural operator 01. The global positioning of the dimer on the operator is dramatically asymmetric, which results in a different pattern of specific contacts between the two sites. Specific recognition is accomplished by a combination of elongation and twist by 48 degrees of the right lac subunit relative to the left one, significant rearrangement of many side chains as well as sequence-dependent deformability of the DNA. The set of recognition mechanisms involved in the lac repressor-operator system is unique among other protein-DNA complexes and presents a nice example of the adaptability that both proteins and DNA exhibit in the context of their mutual interaction.

Fine-tuning function: correlation of hinge domain interactions with functional distinctions between LacI and PurR

LacI and PurR are highly homologous proteins. Their functional units are homodimers, with an N-terminal DNA binding domain that comprises the helix-turn-helix (HTH), N-linker, and hinge regions from both monomers. Hinge structural changes are known to occur upon DNA dissociation but are difficult to monitor experimentally. The initial steps of hinge unfolding were therefore examined using molecular dynamics simulations, utilizing a truncated, chimeric protein comprising the LacI HTH/N-linker and PurR hinge. A terminal Gly-Cys-Gly was added to allow "dimerization" through disulfide bond formation. Simulations indicate that differences in LacI and PurR hinge primary sequence affect the quaternary structure of the hinge x hinge' interface. However, these alternate hinge orientations would be sterically restricted by the core domain. These results prompted detailed comparison of recently available DNA-bound structures for LacI and truncated LacI(1-62) with the PurR structure. Examination revealed that different N-linker and hinge contacts to the core domain of the partner monomer (which binds effector molecule) affect the juxtapositions of the HTH, N-linker, and hinge regions in the DNA binding domain. In addition, the two full-length repressors exhibit significant differences in the interactions between the core and the C-linker connection to the DNA binding domain. Both linkers and the hinge have been implicated in the allosteric response of these repressors. Intriguingly, one functional difference between these two proteins is that they exhibit opposite allosteric response to effector. Simulations and observed structural distinctions are correlated with mutational analysis and sequence information from the LacI/GalR family to formulate a mechanism for fine-tuning individual repressor function.

Structural analysis of conserved base pairs in protein-DNA complexes

Understanding of protein-DNA interactions is crucial for prediction of DNA-binding specificity of transcription factors and design of novel DNA-binding proteins. In this paper we develop a novel approach to analysis of protein-DNA interactions. We bring together two sources of information: (i) structures of protein-DNA complexes (PDB/NDB database) and (ii) experimentally obtained sites recognized by DNA-binding proteins. Sites are used to compute conservation (information content) of each base pair, which indicates relative importance of the base pair in specific recognition. The main result of this study is that conservation of base pairs in a site exhibits significant correlation with the number of contacts the base pairs have with the protein. In particular, base pairs that have more contacts with the protein are more conserved in evolution. As natural as it is, this result has never been reported before. We also observe that for most of the studied proteins, hydrogen bonds and hydrophobic interactions alone cannot explain the pattern of evolutionary conservation in the binding site suggesting cumulative contribution of different types of interactions to specific recognition. Implications for prediction of the DNA-binding specificity are discussed.

Photoreactivity of 5-iodouracil-containing DNA-Sso7d complex in solution: the protein-induced DNA kink causes intrastrand hydrogen abstraction from the 5-methyl of thymine at the 5' side

Photoirradiation of 5-iodouracil-containing DNA, d(GTAAT(I)UAC)(2) with Sso7d protein, possessing significant kink in DNA in the crystal structure induces an unprecedented intrastrand H abstraction at the methyl group of T(5), together with selective photooxidations at Met29 of Sso7d. The reactivity of the deoxyuridin-5-yl radical can be explained by the crystal structure of the d(GTAATTAC)(2)-Sso7d complex, suggesting that the interaction of DNA-Sso7d in solution is substantially similar to its crystal structure.

Thermodynamics of E. coli cytidine repressor interactions with DNA: distinct modes of binding to different operators suggests a role in differential gene regulation

Interactions between the Escherichia coli cytidine repressor protein (CytR) and its operator sites at the different promoters that comprise the CytR regulon, play an important role in the regulation of these promoters. The natural operators are palindromes separated by variable length central spacers (0-9 bp). We have suggested that this variability affects the flexibility of CytR-DNA contacts, thereby affecting the critical protein-protein interactions between CytR and the cAMP receptor protein (CRP) that underlie differential repression and activation of CytR-regulated genes. To assess this hypothesis, we investigated the thermodynamics of CytR binding to the natural operator sequences found in udpP and deoP2. To separate effects due to spacing from effects due to the differing sequences of the recognition half-sites of these two operators, we also investigated CytR binding to artificial hybrid operators, in which the half-site sequences of udpP and deoP2 were exchanged. Thermodynamic parameters, DeltaS(o), DeltaH(o) and DeltaC(o)(p), were determined by van't Hoff analysis of CytR binding, monitored by changes in the steady-state fluorescence anisotropy of dye-conjugated, operator-containing oligonucleotides. Large differences in thermodynamics were observed that depend primarily on the central spacer rather than the sequences of the recognition half-sites. Binding to operators with deoP2 spacing results in a very large, negative DeltaC(o)(p). Association is strongly favored enthalpically and strongly disfavored entropically at ambient temperature. By contrast, binding to operators with udpP spacing results in a small, negative DeltaC(o)(p). Association is weakly favored both enthalpically and entropically at ambient temperature. A difference of such magnitude in DeltaDeltaC(o)(p) has not been reported previously for specific binding of a transcription factor to different sites. The identical salt dependence of CytR binding to deoP2 and udpP operators indicates that ion-dependent processes do not contribute significantly to this difference. Thus, the different thermodynamic effects appear to reflect distinctly different modes of site-specific DNA binding. We discuss similarities to operator binding by CytR homologs among LacI family repressors, and we consider how different CytR binding modes might affect interactions with other components of the gene regulatory machinery that contribute to differential gene regulation.

Evolution of DNA binding motifs and operators

A gene regulatory protein with helix-turn-helix (HTH) DNA-binding motif, GalS contains a functional operator within the DNA sequences encoding the HTH region (Nature 369 (1994) 314). We searched for operator-like sequences within the DNA sequences encoding the DNA binding motifs of other regulatory proteins. Five such proteins, DeoR, CytR, LRP, LuxR and PurR, were found to have actual operator or operator-like sequences in the DNA sequences encoding the DNA-binding motif. Except DeoR, all of them including GalS, are known to be auto-regulated. Auto-regulation in case of DeoR has not been investigated. Seven other proteins containing a HTH motif, do not have operator-like sequences in the DNA sequences encoding the HTH motif; none of them, except MerR, are known to be auto-regulated. The DNA binding proteins may have evolved from a common ancestor containing a DNA binding site within its gene segment that encodes the DNA-binding motif to facilitate auto-regulation. We have discussed current evidence for monophyletic or polyphyletic origin of such sequences.

Inhibiting transcription factor/DNA complexes using fluorescent microgonotropens (FMGTs)

Fluorescent microgonotropens (FMGTs) are A/T selective, minor groove-binding bisbenzimidazole ligands. Basic side chains extending from these agents electrostatically contact the major groove side of the phosphodiester backbone of DNA, endowing them with high binding affinity. Here, we evaluate the potential of these agents as inhibitors of transcription factor (TF) binding to DNA and explore whether their ability to contact both grooves enhances their inhibitory activity. A series of FMGTs (L2-L5), with polyamine tails of varying lengths and degrees of branching, were compared to an analog lacking these basic side chains (L1), and the classical bisbenzimidazole Hoechst 33342 for effects on TF complex formation on the c-fos serum response element (SRE). Although L1 could not inhibit TF/SRE interactions, L2-L5 did so at submicromolar concentrations. Moreover, the FMGTs were up to 50 times more potent than Hoechst 33342 in inhibiting TF complex formation in electrophoretic mobility shift assays. The FMGTs also inhibited c-fos promoter-driven cell-free transcription and topoisomerase II activity in nuclei. These studies establish the potential of FMGTs as TF/DNA complex inhibitors in cell-free systems, provide insight into the relationship between their structure and biological activities, and demonstrate the benefits of functionalizing minor groove binding-agents with major groove-contacting groups.

The structure and function of glutamate receptor ion channels

As in the case of many ligand-gated ion channels, the biochemical and electrophysiological properties of the ionotropic glutamate receptors have been studied extensively. Nevertheless, we still do not understand the molecular mechanisms that harness the free energy of agonist binding, first to drive channel opening, and then to allow the channel to close (desensitize) even though agonist remains bound. Recent crystallographic analyses of the ligand-binding domains of these receptors have identified conformational changes associated with agonist binding, yielding a working hypothesis of channel function. This opens the way to determining how the domains and subunits are assembled into an oligomeric channel, how the domains are connected, how the channel is formed, and where it is located relative to the ligand-binding domains, all of which govern the processes of channel activation and desensitization.

Strong minor groove base conservation in sequence logos implies DNA distortion or base flipping during replication and transcription initiation

The sequence logo for DNA binding sites of the bacteriophage P1 replication protein RepA shows unusually high sequence conservation ( approximately 2 bits) at a minor groove that faces RepA. However, B-form DNA can support only 1 bit of sequence conservation via contacts into the minor groove. The high conservation in RepA sites therefore implies a distorted DNA helix with direct or indirect contacts to the protein. Here I show that a high minor groove conservation signature also appears in sequence logos of sites for other replication origin binding proteins (Rts1, DnaA, P4 alpha, EBNA1, ORC) and promoter binding proteins (sigma(70), sigma(D) factors). This finding implies that DNA binding proteins generally use non-B-form DNA distortion such as base flipping to initiate replication and transcription.

Regulated assembly of transcription factors and control of transcription initiation

Proteins that function in regulation of transcription initiation are typically homo or hetero-oligomeric. Results of recent biophysical studies of transcription regulators indicate that the assembly of these proteins is often subject to regulation. This regulation of assembly dictates the frequency of transcription initiation via its influence on the affinity of a transcription regulator for DNA and its affect on target site selection. Factors that modulate transcription factor assembly include binding of small molecules, post-translational modification, DNA binding and interactions with other proteins. Here, the results of recent structural and/or thermodynamic studies of a number of transcription regulators that are subject to regulated assembly are reviewed. The accumulated data indicate that this phenomenon is ubiquitous and that mechanisms utilized in eukaryotes and prokaryotes share common features.

Recognition of specific DNA sequences

Proteins that recognize specific DNA sequences play a central role in the regulation of transcription. The tremendous increase in structural information on protein-DNA complexes has uncovered a remarkable structural diversity in DNA binding folds, while at the same time revealing common themes in binding to target sites in the genome.

The Bacillus subtilis catabolite control protein CcpA exerts all its regulatory functions by DNA-binding

In Bacillus subtilis, carbon catabolite control is mediated by the regulatory protein CcpA. In addition to loss of catabolite repression, ccpA mutants exhibit a severe growth defect. They are not able to grow with glucose and ammonium as single sources of carbon and nitrogen, respectively. Only ccpA mutant strains carrying either secondary suppressor mutations or that are affected in specific amino acids in the DNA-binding domain of CcpA grow on minimal media. We addressed the importance of DNA-binding by CcpA for both carbon catabolite repression and growth of a mutant strain. A strain specifically deleted for the N-terminal DNA-binding domain of CcpA was constructed. This deletion resulted in complete loss of catabolite repression of beta-xylosidase synthesis and prevented bacteria from growing on minimal media, suggesting that DNA-binding by CcpA is required for both carbon catabolite repression and efficient growth on minimal media.

Structural insights into the ligand binding domains of membrane bound guanylyl cyclases and natriuretic peptide receptors

Membrane bound guanylyl cyclases are single chain transmembrane receptors that produce the second messenger cGMP by either intra- or extracellular stimuli. This class of type I receptors contain an intracellular catalytic guanylyl cyclase domain, an adjacent kinase-like domain and an extracellular ligand binding domain though some receptors have their ligands yet to be identified. The most studied member is the atrial natriuretic peptide (ANP) receptor, which is involved in blood pressure regulation. Extracellular ANP binding induces a conformational change thereby activating the pre-oligomerized receptor leading to the production of cGMP. The recent crystal structure of the dimerized hormone binding domain of the ANP receptor provides a first three-dimensional view of this domain and can serve as a basis to structurally analyze mutagenesis, cross-linking, and genetic studies of this class of receptors as well as a non-catalytic homolog, the clearance receptor. The fold of the ligand binding domain is that of a bilobal periplasmic binding protein (PBP) very similar to that of the Leu/Ile/Val binding protein, AmiC, multi-domain transmembrane metabotropic glutamate receptors, and several DNA binding proteins such as the lactose repressor. Unlike these structural homologs, the guanylyl cyclase receptors bind much larger molecules at a site seemingly remote from the usual small molecule binding site in periplasmic binding protein folds. Detailed comparisons with these structural homologs offer insights into mechanisms of signal transduction and allosteric regulation, and into the remarkable usage of the periplasmic binding protein fold in multi-domain receptors/proteins.

Corepressor-induced organization and assembly of the biotin repressor: a model for allosteric activation of a transcriptional regulator

The Escherichia coli biotin repressor binds to the biotin operator to repress transcription of the biotin biosynthetic operon. In this work, a structure determined by x-ray crystallography of a complex of the repressor bound to biotin, which also functions as an activator of DNA binding by the biotin repressor (BirA), is described. In contrast to the monomeric aporepressor, the complex is dimeric with an interface composed in part of an extended beta-sheet. Model building, coupled with biochemical data, suggests that this is the dimeric form of BirA that binds DNA. Segments of three surface loops that are disordered in the aporepressor structure are located in the interface region of the dimer and exhibit greater order than was observed in the aporepressor structure. The results suggest that the corepressor of BirA causes a disorder-to-order transition that is a prerequisite to repressor dimerization and DNA binding.

Strong DNA binding by covalently linked dimeric Lac headpiece: evidence for the crucial role of the hinge helices

The combined structural and biochemical studies on Lac repressor bound to operator DNA have demonstrated the central role of the hinge helices in operator bending and the induction mechanism. We have constructed a covalently linked dimeric Lac-headpiece that binds DNA with four orders of magnitude higher affinity as compared with the monomeric form. This enabled a detailed biochemical and structural study of Lac binding to its cognate wild-type and selected DNA operators. The results indicate a profound contribution of hinge helices to the stability of the protein-DNA complex and highlight their central role in operator recognition. Furthermore, protein-DNA interactions in the minor groove appear to modulate hinge helix stability, thus accounting for affinity differences and protein-induced DNA bending among the various operator sites. Interestingly, the in vitro DNA-binding affinity of the reported dimeric Lac construct can de readily modulated by simple adjustment of redox conditions, thus rendering it a potential artificial gene regulator.

The structural basis of acyl coenzyme A-dependent regulation of the transcription factor FadR

FadR is an acyl-CoA-responsive transcription factor, regulating fatty acid biosynthetic and degradation genes in Escherichia coli. The apo-protein binds DNA as a homodimer, an interaction that is disrupted by binding of acyl-COA: The recently described structure of apo-FadR shows a DNA binding domain coupled to an acyl-CoA binding domain with a novel fold, but does not explain how binding of the acyl-CoA effector molecule > 30 A away from the DNA binding site affects transcriptional regulation. Here, we describe the structures of the FadR-operator and FadR- myristoyl-CoA binary complexes. The FadR-DNA complex reveals a novel winged helix-turn-helix protein-DNA interaction, involving sequence-specific contacts from the wing to the minor groove. Binding of acyl-CoA results in dramatic conformational changes throughout the protein, with backbone shifts up to 4.5 A. The net effect is a rearrangement of the DNA binding domains in the dimer, resulting in a change of 7.2 A in separation of the DNA recognition helices and the loss of DNA binding, revealing the molecular basis of acyl-CoA-responsive regulation.

Structural basis of the redox switch in the OxyR transcription factor

The Escherichia coli OxyR transcription factor senses H2O2 and is activated through the formation of an intramolecular disulfide bond. Here we present the crystal structures of the regulatory domain of OxyR in its reduced and oxidized forms, determined at 2.7 A and 2.3 A resolutions, respectively. In the reduced form, the two redox-active cysteines are separated by approximately 17 A. Disulfide bond formation in the oxidized form results in a significant structural change in the regulatory domain. The structural remodeling, which leads to different oligomeric associations, accounts for the redox-dependent switch in OxyR and provides a novel example of protein regulation by "fold editing" through a reversible disulfide bond formation within a folded domain.

Synthesis of the Streptomyces lividans maltodextrin ABC transporter depends on the presence of the regulator MalR

During growth with maltotriose or amylose, Streptomyces lividans and Streptomyces coelicolor A3(2) synthesize a maltodextrin uptake system with highest specificity for maltotriose. The transport activity is absent in mutants of S. coelicolor A3(2) lacking a functional MalE binding protein. Cloning and sequencing data suggest that the mal operon of S. coelicolor A3(2) corresponds to the one of S. lividans and that the deduced S. lividans Reg1 amino acid sequence is identical to that of MalR from S. coelicolor A3(2). It can be concluded that both strains have the same ABC transport system for maltodextrins. The S. lividans malR was cloned in Escherichia coli in frame with six histidine-encoding codons. The resulting, purified 6HisMalR(SI) was shown to bind to two motifs within the S. lividans malR-malE intergenic region and to dissociate in the presence of maltopentaose.

Floppy SOX: mutual induced fit in hmg (high-mobility group) box-DNA recognition

The high-mobility group (HMG) box defines a DNA-bending motif of broad interest in relation to human development and disease. Major and minor wings of an L-shaped structure provide a template for DNA bending. As in the TATA-binding protein and a diverse family of factors, insertion of one or more side chains between base pairs induces a DNA kink. The HMG box binds in the DNA minor groove and may be specific for DNA sequence or distorted DNA architecture. Whereas the angular structures of non-sequence-specific domains are well ordered, free SRY and related autosomal SOX domains are in part disordered. Observations suggesting that the minor wing lacks a fixed tertiary structure motivate the hypothesis that DNA bending and stabilization of protein structure define a coupled process. We further propose that mutual induced fit in SOX-DNA recognition underlies the sequence dependence of DNA bending and enables the induction of promoter-specific architectures.

The Lac repressor: a second generation of structural and functional studies

In the past year, the crystal structure of a dimeric version of the Escherichia coli Lac repressor bound to operator DNA was determined at 2.6A resolution, providing a closer view of the operator-bound conformation of the repressor. Refined NMR studies of the DNA-binding portion of the repressor complexed to operator DNA have revealed further details of the unique DNA-binding interactions of the repressor. The structural studies have been complemented by continued biochemical studies, with the overall goal of understanding the mechanism of allosteric regulation.

Plasticity of quaternary structure: twenty-two ways to form a LacI dimer

The repressor proteins of the LacI/GalR family exhibit significant similarity in their secondary and tertiary structures despite less than 35% identity in their primary sequences. Furthermore, the core domains of these oligomeric repressors, which mediate dimerization, are homologous with the monomeric periplasmic binding proteins, extending the issue of plasticity to quaternary structure. To elucidate the determinants of assembly, a structure-based alignment has been created for three repressors and four periplasmic binding proteins. Contact maps have also been constructed for the three repressor interfaces to distinguish any conserved interactions. These analyses show few strict requirements for assembly of the core N-subdomain interface. The interfaces of repressor core C-subdomains are well conserved at the structural level, and their primary sequences differ significantly from the monomeric periplasmic binding proteins at positions equivalent to LacI 281 and 282. However, previous biochemical and phenotypic analyses indicate that LacI tolerates many mutations at 281. Mutations at LacI 282 were shown to abrogate assembly, but for Y282D this could be compensated by a second-site mutation in the core N-subdomain at K84 to L or A. Using the link between LacI assembly and function, we have further identified 22 second-site mutations that compensate the Y282D dimerization defect in vivo. The sites of these mutations fall into several structural regions, each of which may influence assembly by a different mechanism. Thus, the 360-amino acid scaffold of LacI allows plasticity of its quaternary structure. The periplasmic binding proteins may require only minimal changes to facilitate oligomerization similar to the repressor proteins.

DNA binding sites for the Mlc and NagC proteins: regulation of nagE, encoding the N-acetylglucosamine-specific transporter in Escherichia coli

The NagC and Mlc proteins are homologous transcriptional regulators that control the expression of several phosphotransferase system (PTS) genes in Escherichia coli. NagC represses nagE, encoding the N:-acetylglucosamine-specific transporter, while Mlc represses three PTS operons, ptsG, manXYZ and ptsHIcrr, involved in the uptake of glucose. NagC and Mlc can bind to each others operator, at least in vitro. A binding site selection procedure was used to try to distinguish NagC and Mlc sites. The major difference was that all selected NagC binding sites had a G or a C at positions +11/-11 from the centre of symmetry. This is also the case for most native NagC sites, but not the nagE operator, which thus looks like a potential Mlc target. The nagE operator does exhibit a higher affinity for Mlc than NagC, but no regulation of nagE by physiological concentrations of Mlc was detected in vivo. Regulation of wild-type nagE by NagC is achieved because of the chelation effect due to a second high affinity NagC operator covering the nagB promoter. Replacing the A/T at +11/-11 with C/G allows repression by NagC in the absence of the nagB operator.

Quorum sensing in Vibrio fischeri: analysis of the LuxR DNA binding region by alanine-scanning mutagenesis

LuxR is the transcriptional activator for quorum-sensing control of luminescence in Vibrio fischeri. A series of alanine-scanning mutants spanning a predicted helix-turn-helix region in the DNA binding domain of LuxR was constructed, and the activity of each of the LuxR mutant proteins in recombinant Escherichia coli was investigated. The region covered by the mutagenesis spanned residues 190 to 224. About half of the alanine-scanning mutants showed activities similar to that of the wild-type LuxR: at least two were positive-control mutants, four appeared to be defective in DNA binding, and several others were characterized as DNA binding affinity mutants. This analysis, taken together with information about other bacterial transcription factors, provides insights into amino acid residues in LuxR that are involved in DNA binding and transcriptional activation.

A homologue of the tryptophan-rich sensory protein TspO and FixL regulate a novel nutrient deprivation-induced Sinorhizobium meliloti locus

A nutrient deprivation-induced locus in Sinorhizobium meliloti strain 1021 was identified by use of a Tn5-luxAB reporter gene transposon. The tagged locus is comprised of two open reading frames (ORFs) designated ndiA and ndiB for nutrient deprivation-induced genes A and B. Comparison of the deduced amino acid sequences of both ndiA and ndiB to the protein databases failed to reveal similarity to any known genes. The expression of the ndi locus was found to be induced by carbon and nitrogen deprivation, osmotic stress, and oxygen limitation and during entry into stationary phase. To identify regulatory components involved in the control of ndi gene expression, a second round of mutagenesis was performed on the primary ndiB::Tn5-luxAB-tagged strain (C22) with transposon Tn1721. A double-mutant strain was obtained that lacked ndi locus transcriptional activity under all of the inducing conditions tested. The Tn1721-tagged gene showed a high degree of similarity to tryptophan-rich sensory protein TspO from Rhodobacter sphaeroides, as well as to mitochondrial benzodiazepine receptor pK18 from mammals. Induction of the ndi::Tn5-luxAB reporter gene fusion was restored under all inducing conditions by introducing the tspO coding region, from either S. meliloti or R. sphaeroides, in trans. Furthermore, it was found that, in addition to tspO, fixL, which encodes the sensor protein of an oxygen-sensing two-component system, is required for full expression of the ndi locus, but only under low oxygen tension.

Bacillus subtilis ccpA gene mutants specifically defective in activation of acetoin biosynthesis

A large number of carbon source utilization pathways are repressed in Bacillus subtilis by the global regulator CcpA, which also acts as an activator of carbon excretion pathways during growth in media containing glucose. In this study, CcpA mutants defective in transcriptional activation of the alsSD operon, which is involved in acetoin biosynthesis, were identified. These mutants retained normal glucose repression of amyE, encoding alpha-amylase, and acsA, encoding acetyl-coenzyme A synthetase, and normal activation of ackA, which is involved in acetate excretion; in these ccpA mutants the CcpA functions of activation of the acetate and acetoin excretion pathways appear to be separated.

Binding characteristics of CebR, the regulator of the ceb operon required for cellobiose/cellotriose uptake in Streptomyces reticuli

The Streptomyces reticuli Avicelase (cellulase, Cell) hydrolyzes crystalline cellulose to cellooligomers, cellobiose and cellotriose which are taken up by mycelia via an ABC transport system (Ceb) induced during growth with cellobiose or cellulose. The cebR gene located upstream of the cebEFG operon was cloned in Escherichia coli in frame with six histidine-encoding codons. The resulting purified fusion protein was shown to bind to a motif of 23 bp, including a perfect 18-bp palindrome situated upstream of the cebEFG. Cytoplasmic extracts of induced, but not of uninduced S. reticuli protected the same DNA motif. Release of the CebR regulator from its operator occurs upon addition of cellopentaose which can be assumed to act as inducer within the mycelia.

Geometric analysis and comparison of protein-DNA interfaces: why is there no simple code for recognition?

Structural studies of protein-DNA complexes have shown that there are many distinct families of DNA-binding proteins, and have shown that there is no simple "code" describing side-chain/base interactions. However, systematic analysis and comparison of protein-DNA complexes has been complicated by the diversity of observed contacts, the sheer number of complexes currently available and the absence of any consistent method of comparison that retains detailed structural information about the protein-DNA interface. To address these problems, we have developed geometric methods for characterizing the local structural environment in which particular side-chain/base interactions are observed. In particular, we develop methods for analyzing and comparing spatial relationships at the protein-DNA interface. Our method involves attaching local coordinate systems to the DNA bases and to the C(alpha) atoms of the peptide backbone (these are relatively rigid structural units). We use these tools to consider how the position and orientation of the polypeptide backbone (with respect to the DNA) helps to determine what contacts are possible at any given position in a protein-DNA complex. Here, we focus on base contacts that are made in the major groove, and we use spatial relationships in analyzing: (i) the observed patterns of side-chain/base interactions; (ii) observed helix docking orientations; (iii) family/subfamily relationships among DNA-binding proteins; and (iv) broader questions about evolution, altered specificity mutants and the limits for the design of new DNA-binding proteins. Our analysis, which highlights differences in spatial relationships in different complexes and at different positions in a complex, helps explain why there is no simple, general code for protein-DNA recognition.

A-form conformational motifs in ligand-bound DNA structures

Recognition and biochemical processing of DNA requires that proteins and other ligands are able to distinguish their DNA binding sites from other parts of the molecule. In addition to the direct recognition elements embedded in the linear sequence of bases (i.e. hydrogen bonding sites), these molecular agents seemingly sense and/or induce an "indirect" conformational response in the DNA base-pairs that facilitates close intermolecular fitting. As part of an effort to decipher this sequence-dependent structural code, we have analyzed the extent of B-->A conformational conversion at individual base-pair steps in protein and drug-bound DNA crystal complexes. We take advantage of a novel structural parameter, the position of the phosphorus atom in the dimer reference frame, as well as other documented measures of local helical structure, e.g. torsion angles, base-pair step parameters. Our analysis pinpoints ligand-induced conformational changes that are difficult to detect from the global perspective used in other studies of DNA structure. The collective data provide new structural details on the conformational pathway connecting A and B-form DNA and illustrate how both proteins and drugs take advantage of the intrinsic conformational mechanics of the double helix. Significantly, the base-pair steps which exhibit pure A-DNA conformations in the crystal complexes follow the scale of A-forming tendencies exhibited by synthetic oligonucleotides in solution and the known polymorphism of synthetic DNA fibers. Moreover, most crystallographic examples of complete B-to-A deformations occur in complexes of DNA with enzymes that perform cutting or sealing operations at the (O3'-P) phosphodiester linkage. The B-->A transformation selectively exposes sugar-phosphate atoms, such as the 3'-oxygen atom, ordinarily buried within the chain backbone for enzymatic attack. The forced remodeling of DNA to the A-form also provides a mechanism for smoothly bending the double helix, for controlling the widths of the major and minor grooves, and for accessing the minor groove edges of individual base-pairs.

Conformational changes and cleavage by the homing endonuclease I-PpoI: a critical role for a leucine residue in the active site

The homing endonuclease I-PpoI severely bends its DNA target, resulting in significant deformations of the minor and major groove near the scissile phosphate groups. To study the role of conformational changes within the protein catalyst and the DNA substrate, we have determined the structure of the enzyme in the absence of bound DNA, performed gel retardation analyses of DNA binding and bending, and have mutagenized a leucine residue that contacts an adenine nucleotide at the site of cleavage. The structure of the L116A/DNA complex has been determined and the effects of the mutation on affinity and catalysis have been measured. The wild-type protein displays a rigid-body rotation of its individual subunits upon DNA binding. Homing site DNA is not detectably bent in the absence of protein, but is sharply bent in both the wild-type and L116A complexes. These results indicate that binding involves a large distortion of the DNA and a smaller change in protein conformation. Leucine 116 is critical for binding and catalysis: it appears to be important for forming a well-ordered protein-DNA complex at the cleavage site, for maximal deformation of the DNA, and for desolvation of the nucleotide bases that are partially unstacked in the enzyme complex.

DNA recognition by beta-sheets

The modes of DNA recognition by beta-sheets are analyzed by using the known crystal and solution three-dimensional structures of DNA-protein complexes. Close fitting of the protein surface and the DNA surface determines the binding geometry. Interaction takes place so that essentially the N-to-C direction of the beta-strands either follows or crosses the DNA groove. Upon following the major groove a two-stranded antiparallel beta-sheet dives into the groove and contacts DNA bases with its convex side facing the DNA, while upon following the minor groove, it binds around the sugar-phosphate backbones, with its opposite concave side shielding the DNA. In order for the beta-strands crossing the minor groove to interact with the DNA, the dinucleotide steps need to almost totally helically untwist and roll around major groove. The beta-sheet, on the other hand, needs to adopt a concave curvature on the binding surface in the direction that follows the DNA minor groove, and a convex surface in the direction that bridges the sugar-phosphate backbones across the groove. The result is to produce a hyperbolic paraboloidal DNA-binding surface.

Helix bending as a factor in protein/DNA recognition

Normal vectors perpendicular to individual base pairs are a powerful tool for studying the bending behavior of B-DNA, both in the form of normal vector plots and in matrices that list angles between vectors for all possible base pair combinations. A new analysis program, FREEHELIX, has been written for this purpose, and applied to 86 examples of sequence-specific protein/DNA complexes whose coordinates are on deposit in the Nucleic Acid Data Base. Bends in this sample of 86 structures almost invariably follow from roll angles between adjacent base pairs; tilt makes no net contribution. Roll in a direction compressing the broad major groove is much more common than that which compresses the minor groove. Three distinct types of B-DNA bending are observed, each with a different molecular origin: (1) Localized kinking is produced by large roll at single steps or at two steps separated by one turn of helix. (2) Smooth, planar curvature is produced by positive and negative roll angles spaced a half-turn apart, with random side-to-side zigzag roll at intermediate points, rather than a tilt contribution that might have been expected theoretically. (3) Three-dimensional writhe results from significant roll angles at a continuous series of steps. Writhe need not change the overall direction of helix axis, if it is continued indefinitely or for an integral number of helical turns. A-DNA itself can be formally considered as possessing uniform, continuous writhe that yields no net helix bending. Smooth curvature is the most intricate deformation of the three, and is least common. Writhe is the simplest deformation and is most common; indeed, a low level of continuous writhe is the normal condition of an otherwise unbent B-DNA helix of general sequence. With one exception, every example of major kinking in this sample of 86 structures involves a pyrimidine-purine step: C-A/T-G, T-A, or C-G. Purine-purine steps, especially A-A, show the least tendency toward roll deformations.

Separate domains in E1 and E2 proteins serve architectural and productive roles for cooperative DNA binding

The E1 and E2 proteins from bovine papillomavirus bind cooperatively to binding sites in the viral origin of DNA replication. The DNA-binding domains (DBDs) of the two proteins interact with each other, and the E2 transactivation domain interacts with the helicase domain of E1. Mutations that disrupt the interaction between the two DBDs also disrupt the interaction between the E2 activation domain and the E1 helicase domain, demonstrating interdependence of the two interactions. Cooperative binding of the two DBDs generates a sharp bend in the DNA that is required for interaction between the E2 activation domain and E1. This indicates that interaction between the two DBDs plays an architectural role, 'triggering' a productive interaction between the E2 transactivation domain and E1 through introduction of a sharp bend in the DNA. This two-step mechanism may be a required feature for cooperative DNA binding to proximal binding sites.

SRPrises in RNA-protein recognition

The recent structure determination of the phylogenetically conserved cor re of the signal recognition particle (SRP) reveals a novel of highly un usual RNA-protein interface, where non-canonical base pairs play a centr al role. The structure shows how a helix-turn-helix motif can be employ ed to bind RNA and offers hints as to how the signal peptide is recogniz ed by the SRP.

Binding mechanisms of TATA box-binding proteins: DNA kinking is stabilized by specific hydrogen bonds

One of the common mechanisms of DNA bending by minor groove-binding proteins is the insertion of protein side chains between basepair steps, exemplified in TBP (TATA box-binding protein)/DNA complexes. At the central basepair step of the TATA box TBP produces a noticeable decrease in twist and an increase in roll, while engaging in hydrogen bonds with the bases and sugars. This suggests a mechanism for the stabilization of DNA kinks that was explored here with ab initio quantum mechanical calculations and molecular dynamics/potential of mean force calculations. The hydrogen bonds are found to contribute the energy necessary to drive the conformational transition at the central basepair step. The Asn, Thr, and Gly residues involved in hydrogen bonding to the DNA bases and sugar oxygens form a relatively rigid motif in TBP. The interaction of this motif with DNA is found to be responsible for inducing the untwisting and rolling of the central basepair step. Notably, direct readout is shown not to be capable of discriminating between AA and AT steps, as the strength of the hydrogen bonds between TBP and the DNA are the same for both sequences. Rather, the calculated free energy cost for an equivalent conformational transition is found to be sequence-dependent, and is calculated to be higher for AA steps than for AT steps.

Domain swapping in the sporulation response regulator Spo0A

Adaptive responses of micro-organisms, such as chemotaxis and sporulation, are governed by two-component systems consisting of sensor kinases, that interpret environmental signals, and response regulators which activate the appropriate physiological responses. Signal transduction via response regulator proteins is mediated through transient phosphorylation of aspartic acid residues. In Spo0A, the key regulator of development (sporulation) in Bacillus, phosphorylation of the N-terminal receiver domain (N-Spo0A) at aspartate-55 switches on the transcription activation functions residing in the C-terminal effector domain. Here we report the crystal structure of N-Spo0A from Bacillus stearothermophilus at 1.6 A spacing, revealing a dimer formed by an alpha-helix swap. Comparison of this structure with the recently described structure of phosphorylated N-Spo0A shows that dimer formation results from a cis-trans isomerization of the Lys106--Pro107 peptide bond. The quaternary reorganization is associated with alterations in the active site stereochemistry which may have implications for signalling. Remarkably, this 3-D domain swapped N-Spo0A dimer has an identical topology to a hypothetical CheY-like dimer, recently proposed as an intermediate in the evolution of the family of periplasmic substrate binding proteins.

Mutational analysis of MarR, the negative regulator of marRAB expression in Escherichia coli, suggests the presence of two regions required for DNA binding

MarR, the negative regulator of the Escherichia coli multiple antibiotic resistance (marRAB) operon, is a member of a newly recognized family of regulatory proteins. The amino acid sequences of these proteins do not display any apparent homologies to the DNA binding domains of prokaryotic transcription regulators and a DNA binding motif for any one of the MarR homologues is currently unknown. In order to define regions of MarR required for DNA binding, mutant repressors, selected based on their ability to interfere with (negatively complement) the activity of wild-type MarR, were isolated. As determined using gel mobility shift assays, 13 out of 14 negative complementing mutants tested were unable to bind DNA in vitro. Three negative complementing alleles presumably specify truncated repressors and one of these proteins, a 120 residue MarR, can bind DNA in vitro. Most of the negative complementing mutations were clustered within two areas of MarR with features related to a helix-turn-helix DNA binding motif. These regions are presumed to be required for the DNA binding activity of the repressor.